Linux-MIPS Archive on lore.kernel.org
 help / color / Atom feed
From: "周琰杰 (Zhou Yanjie)" <zhouyanjie@wanyeetech.com>
To: linux-mips@vger.kernel.org
Cc: linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, paul@crapouillou.net,
	mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org,
	mark.rutland@arm.com
Subject: [PATCH v5 2/6] clk: Ingenic: Adjust cgu code to make it compatible with X1830.
Date: Sat, 15 Feb 2020 01:27:38 +0800
Message-ID: <1581701262-110556-4-git-send-email-zhouyanjie@wanyeetech.com> (raw)
In-Reply-To: <1581701262-110556-1-git-send-email-zhouyanjie@wanyeetech.com>

The PLL of X1830 Soc from Ingenic has been greatly changed,
the bypass control is placed in another register, so now two
registers may needed to control the PLL. To this end, the
original "reg" was changed to "pll_reg", and a new "bypass_reg"
was introduced. In addition, when calculating rate, the PLL of
X1830 introduced an extra 2x multiplier, so a new "rate_multiplier"
was introduced. And adjust the code in jz47xx-cgu.c and x1000-cgu.c,
make it to be compatible with the new cgu code.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
---

Notes:
    v1->v2:
    1.Use two fields (pll_reg & bypass_reg) instead of the 2-values
      array (reg[2]).
    2.Remove the "pll_info->version" and add a "pll_info->rate_multiplier".
    3.Fix the coding style and add more detailed commit message.
    4.Change my Signed-off-by from "Zhou Yanjie <zhouyanjie@zoho.com>"
      to "周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>" because
      the old mailbox is in an unstable state.
    
    v2->v3:
    Adjust order from [1/5] in v2 to [2/5] in v3.
    
    v3->v4:
    Merge [3/5] in v3 into this patch.
    
    v4->v5:
    Rebase on top of kernel 5.6-rc1.

 drivers/clk/ingenic/cgu.c         | 32 +++++++++++++++++++++-----------
 drivers/clk/ingenic/cgu.h         |  8 ++++++--
 drivers/clk/ingenic/jz4725b-cgu.c |  4 +++-
 drivers/clk/ingenic/jz4740-cgu.c  |  4 +++-
 drivers/clk/ingenic/jz4770-cgu.c  |  8 ++++++--
 drivers/clk/ingenic/jz4780-cgu.c  |  4 +++-
 drivers/clk/ingenic/x1000-cgu.c   |  8 ++++++--
 7 files changed, 48 insertions(+), 20 deletions(-)

diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index ab1302a..7d859e4 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -82,7 +82,7 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	BUG_ON(clk_info->type != CGU_CLK_PLL);
 	pll_info = &clk_info->pll;
 
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->pll_reg);
 
 	m = (ctl >> pll_info->m_shift) & GENMASK(pll_info->m_bits - 1, 0);
 	m += pll_info->m_offset;
@@ -90,6 +90,9 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	n += pll_info->n_offset;
 	od_enc = ctl >> pll_info->od_shift;
 	od_enc &= GENMASK(pll_info->od_bits - 1, 0);
+
+	ctl = readl(cgu->base + pll_info->bypass_reg);
+
 	bypass = !pll_info->no_bypass_bit &&
 		 !!(ctl & BIT(pll_info->bypass_bit));
 
@@ -103,7 +106,8 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	BUG_ON(od == pll_info->od_max);
 	od++;
 
-	return div_u64((u64)parent_rate * m, n * od);
+	return div_u64((u64)parent_rate * m * pll_info->rate_multiplier,
+		n * od);
 }
 
 static unsigned long
@@ -136,7 +140,8 @@ ingenic_pll_calc(const struct ingenic_cgu_clk_info *clk_info,
 	if (pod)
 		*pod = od;
 
-	return div_u64((u64)parent_rate * m, n * od);
+	return div_u64((u64)parent_rate * m * pll_info->rate_multiplier,
+		n * od);
 }
 
 static inline const struct ingenic_cgu_clk_info *to_clk_info(
@@ -180,7 +185,7 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
 			clk_info->name, req_rate, rate);
 
 	spin_lock_irqsave(&cgu->lock, flags);
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->pll_reg);
 
 	ctl &= ~(GENMASK(pll_info->m_bits - 1, 0) << pll_info->m_shift);
 	ctl |= (m - pll_info->m_offset) << pll_info->m_shift;
@@ -191,7 +196,7 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
 	ctl &= ~(GENMASK(pll_info->od_bits - 1, 0) << pll_info->od_shift);
 	ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift;
 
-	writel(ctl, cgu->base + pll_info->reg);
+	writel(ctl, cgu->base + pll_info->pll_reg);
 	spin_unlock_irqrestore(&cgu->lock, flags);
 
 	return 0;
@@ -209,16 +214,21 @@ static int ingenic_pll_enable(struct clk_hw *hw)
 	u32 ctl;
 
 	spin_lock_irqsave(&cgu->lock, flags);
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->bypass_reg);
 
 	ctl &= ~BIT(pll_info->bypass_bit);
+
+	writel(ctl, cgu->base + pll_info->bypass_reg);
+
+	ctl = readl(cgu->base + pll_info->pll_reg);
+
 	ctl |= BIT(pll_info->enable_bit);
 
-	writel(ctl, cgu->base + pll_info->reg);
+	writel(ctl, cgu->base + pll_info->pll_reg);
 
 	/* wait for the PLL to stabilise */
 	for (i = 0; i < timeout; i++) {
-		ctl = readl(cgu->base + pll_info->reg);
+		ctl = readl(cgu->base + pll_info->pll_reg);
 		if (ctl & BIT(pll_info->stable_bit))
 			break;
 		mdelay(1);
@@ -242,11 +252,11 @@ static void ingenic_pll_disable(struct clk_hw *hw)
 	u32 ctl;
 
 	spin_lock_irqsave(&cgu->lock, flags);
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->pll_reg);
 
 	ctl &= ~BIT(pll_info->enable_bit);
 
-	writel(ctl, cgu->base + pll_info->reg);
+	writel(ctl, cgu->base + pll_info->pll_reg);
 	spin_unlock_irqrestore(&cgu->lock, flags);
 }
 
@@ -258,7 +268,7 @@ static int ingenic_pll_is_enabled(struct clk_hw *hw)
 	const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
 	u32 ctl;
 
-	ctl = readl(cgu->base + pll_info->reg);
+	ctl = readl(cgu->base + pll_info->pll_reg);
 
 	return !!(ctl & BIT(pll_info->enable_bit));
 }
diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
index 0dc8004..f7b6908 100644
--- a/drivers/clk/ingenic/cgu.h
+++ b/drivers/clk/ingenic/cgu.h
@@ -16,7 +16,9 @@
 
 /**
  * struct ingenic_cgu_pll_info - information about a PLL
- * @reg: the offset of the PLL's control register within the CGU
+ * @pll_reg: the offset of the PLL's control register within the CGU
+ * @bypass_reg: the offset of the bypass control register within the CGU
+ * @rate_multiplier: the multiplier needed by pll rate calculation
  * @m_shift: the number of bits to shift the multiplier value by (ie. the
  *           index of the lowest bit of the multiplier value in the PLL's
  *           control register)
@@ -43,7 +45,9 @@
  * @no_bypass_bit: if set, the PLL has no bypass functionality
  */
 struct ingenic_cgu_pll_info {
-	unsigned reg;
+	unsigned pll_reg;
+	unsigned bypass_reg;
+	unsigned rate_multiplier;
 	const s8 *od_encoding;
 	u8 m_shift, m_bits, m_offset;
 	u8 n_shift, n_bits, n_offset;
diff --git a/drivers/clk/ingenic/jz4725b-cgu.c b/drivers/clk/ingenic/jz4725b-cgu.c
index a3b4635..0b05167 100644
--- a/drivers/clk/ingenic/jz4725b-cgu.c
+++ b/drivers/clk/ingenic/jz4725b-cgu.c
@@ -53,7 +53,9 @@ static const struct ingenic_cgu_clk_info jz4725b_cgu_clocks[] = {
 		"pll", CGU_CLK_PLL,
 		.parents = { JZ4725B_CLK_EXT, -1, -1, -1 },
 		.pll = {
-			.reg = CGU_REG_CPPCR,
+			.pll_reg = CGU_REG_CPPCR,
+			.bypass_reg = CGU_REG_CPPCR,
+			.rate_multiplier = 1,
 			.m_shift = 23,
 			.m_bits = 9,
 			.m_offset = 2,
diff --git a/drivers/clk/ingenic/jz4740-cgu.c b/drivers/clk/ingenic/jz4740-cgu.c
index 4f0e92c..78f31df 100644
--- a/drivers/clk/ingenic/jz4740-cgu.c
+++ b/drivers/clk/ingenic/jz4740-cgu.c
@@ -68,7 +68,9 @@ static const struct ingenic_cgu_clk_info jz4740_cgu_clocks[] = {
 		"pll", CGU_CLK_PLL,
 		.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
 		.pll = {
-			.reg = CGU_REG_CPPCR,
+			.pll_reg = CGU_REG_CPPCR,
+			.bypass_reg = CGU_REG_CPPCR,
+			.rate_multiplier = 1,
 			.m_shift = 23,
 			.m_bits = 9,
 			.m_offset = 2,
diff --git a/drivers/clk/ingenic/jz4770-cgu.c b/drivers/clk/ingenic/jz4770-cgu.c
index 956dd65..32e476d 100644
--- a/drivers/clk/ingenic/jz4770-cgu.c
+++ b/drivers/clk/ingenic/jz4770-cgu.c
@@ -101,7 +101,9 @@ static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
 		"pll0", CGU_CLK_PLL,
 		.parents = { JZ4770_CLK_EXT },
 		.pll = {
-			.reg = CGU_REG_CPPCR0,
+			.pll_reg = CGU_REG_CPPCR0,
+			.bypass_reg = CGU_REG_CPPCR0,
+			.rate_multiplier = 1,
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
@@ -123,7 +125,9 @@ static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
 		"pll1", CGU_CLK_PLL,
 		.parents = { JZ4770_CLK_EXT },
 		.pll = {
-			.reg = CGU_REG_CPPCR1,
+			.pll_reg = CGU_REG_CPPCR1,
+			.bypass_reg = CGU_REG_CPPCR1,
+			.rate_multiplier = 1,
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
diff --git a/drivers/clk/ingenic/jz4780-cgu.c b/drivers/clk/ingenic/jz4780-cgu.c
index ea905ff..d07fff1 100644
--- a/drivers/clk/ingenic/jz4780-cgu.c
+++ b/drivers/clk/ingenic/jz4780-cgu.c
@@ -220,7 +220,9 @@ static const struct ingenic_cgu_clk_info jz4780_cgu_clocks[] = {
 	/* PLLs */
 
 #define DEF_PLL(name) { \
-	.reg = CGU_REG_ ## name, \
+	.pll_reg = CGU_REG_ ## name, \
+	.bypass_reg = CGU_REG_ ## name, \
+	.rate_multiplier = 1, \
 	.m_shift = 19, \
 	.m_bits = 13, \
 	.m_offset = 1, \
diff --git a/drivers/clk/ingenic/x1000-cgu.c b/drivers/clk/ingenic/x1000-cgu.c
index b22d87b..d6fe28f 100644
--- a/drivers/clk/ingenic/x1000-cgu.c
+++ b/drivers/clk/ingenic/x1000-cgu.c
@@ -57,7 +57,9 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		"apll", CGU_CLK_PLL,
 		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
 		.pll = {
-			.reg = CGU_REG_APLL,
+			.pll_reg = CGU_REG_APLL,
+			.bypass_reg = CGU_REG_APLL,
+			.rate_multiplier = 1,
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
@@ -78,7 +80,9 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		"mpll", CGU_CLK_PLL,
 		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
 		.pll = {
-			.reg = CGU_REG_MPLL,
+			.pll_reg = CGU_REG_MPLL,
+			.bypass_reg = CGU_REG_MPLL,
+			.rate_multiplier = 1,
 			.m_shift = 24,
 			.m_bits = 7,
 			.m_offset = 1,
-- 
2.7.4


  parent reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-14 17:27 Add support for the X1830 and fix bugs for X1000 v5 周琰杰 (Zhou Yanjie)
2020-02-14 17:27 ` [PATCH v5 0/6] " 周琰杰 (Zhou Yanjie)
2020-02-14 17:27 ` [PATCH v5 1/6] clk: Ingenic: Remove unnecessary spinlock when reading registers 周琰杰 (Zhou Yanjie)
2020-02-14 17:27 ` 周琰杰 (Zhou Yanjie) [this message]
2020-02-14 18:49   ` [PATCH v5 2/6] clk: Ingenic: Adjust cgu code to make it compatible with X1830 Paul Cercueil
2020-02-15 14:07     ` Zhou Yanjie
2020-02-14 17:27 ` [PATCH v5 3/6] dt-bindings: clock: Add X1830 bindings 周琰杰 (Zhou Yanjie)
2020-02-14 17:27 ` [PATCH v5 4/6] clk: Ingenic: Add CGU driver for X1830 周琰杰 (Zhou Yanjie)
2020-02-14 17:27 ` [PATCH v5 5/6] dt-bindings: clock: Add and reorder ABI for X1000 周琰杰 (Zhou Yanjie)
2020-02-18 21:05   ` Rob Herring
2020-02-14 17:27 ` [PATCH v5 6/6] clk: X1000: Add FIXDIV for SSI clock of X1000 周琰杰 (Zhou Yanjie)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1581701262-110556-4-git-send-email-zhouyanjie@wanyeetech.com \
    --to=zhouyanjie@wanyeetech.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=paul@crapouillou.net \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-MIPS Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mips/0 linux-mips/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mips linux-mips/ https://lore.kernel.org/linux-mips \
		linux-mips@vger.kernel.org
	public-inbox-index linux-mips

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-mips


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git