From mboxrd@z Thu Jan 1 00:00:00 1970 Received: with ECARTIS (v1.0.0; list linux-mips); Sun, 02 Apr 2017 22:43:50 +0200 (CEST) Received: from outils.crapouillou.net ([89.234.176.41]:44076 "EHLO outils.crapouillou.net" rhost-flags-OK-OK-OK-OK) by eddie.linux-mips.org with ESMTP id S23991726AbdDBUnXO2lQj (ORCPT ); Sun, 2 Apr 2017 22:43:23 +0200 From: Paul Cercueil To: Linus Walleij , Alexandre Courbot , Rob Herring , Mark Rutland , Ralf Baechle Cc: Boris Brezillon , Thierry Reding , Bartlomiej Zolnierkiewicz , Maarten ter Huurne , Lars-Peter Clausen , Paul Burton , james.hogan@imgtec.com, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mips@linux-mips.org, linux-mmc@vger.kernel.org, linux-mtd@lists.infradead.org, linux-pwm@vger.kernel.org, linux-fbdev@vger.kernel.org, Paul Cercueil Subject: [PATCH v4 02/14] dt/bindings: Document gpio-ingenic Date: Sun, 2 Apr 2017 22:42:32 +0200 Message-Id: <20170402204244.14216-3-paul@crapouillou.net> In-Reply-To: <20170402204244.14216-1-paul@crapouillou.net> References: <20170125185207.23902-2-paul@crapouillou.net> <20170402204244.14216-1-paul@crapouillou.net> Return-Path: X-Envelope-To: <"|/home/ecartis/ecartis -s linux-mips"> (uid 0) X-Orcpt: rfc822;linux-mips@linux-mips.org Original-Recipient: rfc822;linux-mips@linux-mips.org X-archive-position: 57533 X-ecartis-version: Ecartis v1.0.0 Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org X-original-sender: paul@crapouillou.net Precedence: bulk List-help: List-unsubscribe: List-software: Ecartis version 1.0.0 List-Id: linux-mips X-List-ID: linux-mips List-subscribe: List-owner: List-post: List-archive: X-list: linux-mips This commit adds documentation for the devicetree bindings of the gpio-ingenic driver, which handles GPIOs of the Ingenic SoCs currently supported by the Linux kernel. Signed-off-by: Paul Cercueil --- .../devicetree/bindings/gpio/ingenic,gpio.txt | 48 ++++++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/ingenic,gpio.txt v2: New patch v3: No changes v4: Update for the v4 version of the gpio-ingenic driver diff --git a/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt b/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt new file mode 100644 index 000000000000..f54af444f7c3 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt @@ -0,0 +1,48 @@ +Ingenic jz47xx GPIO controller + +That the Ingenic GPIO driver node must be a sub-node of the Ingenic pinctrl +driver node. + +Required properties: +-------------------- + + - compatible: Must contain one of: + - "ingenic,jz4740-gpio" + - "ingenic,jz4770-gpio" + - "ingenic,jz4780-gpio" + And one of: + - "ingenic,gpio-bank-a" + - "ingenic,gpio-bank-b" + - "ingenic,gpio-bank-c" + - "ingenic,gpio-bank-d" + - "ingenic,gpio-bank-e" (for SoC version > jz4740) + - "ingenic,gpio-bank-f" (for SoC version > jz4740) + - interrupt-controller: Marks the device node as an interrupt controller. + - interrupts: Interrupt specifier for the controllers interrupt. + - #interrupt-cells: Should be 2. Refer to + ../interrupt-controller/interrupts.txt for more details. + - gpio-controller: Marks the device node as a GPIO controller. + - #gpio-cells: Should be 2. The first cell is the GPIO number and the second + cell specifies GPIO flags, as defined in . Only the + GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. + - gpio-ranges: Range of pins managed by the GPIO controller. Refer to + 'gpio.txt' in this directory for more details. + +Example: +-------- + +&pinctrl { + gpa: gpio-controller@0 { + compatible = "ingenic,gpio-bank-a", "ingenic,jz4740-gpio"; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <28>; + }; +}; -- 2.11.0