linux-mips.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paul Cercueil <paul@crapouillou.net>
To: Thierry Reding <thierry.reding@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ralf Baechle <ralf@linux-mips.org>,
	Paul Burton <paul.burton@mips.com>,
	James Hogan <jhogan@kernel.org>, Jonathan Corbet <corbet@lwn.net>
Cc: Mathieu Malaterre <malat@debian.org>,
	Ezequiel Garcia <ezequiel@collabora.co.uk>,
	PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>,
	linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org,
	linux-mips@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-clk@vger.kernel.org, od@zcrc.me,
	Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH v8 08/26] watchdog: jz4740: Use regmap provided by TCU driver
Date: Wed, 12 Dec 2018 23:09:03 +0100	[thread overview]
Message-ID: <20181212220922.18759-9-paul@crapouillou.net> (raw)
In-Reply-To: <20181212220922.18759-1-paul@crapouillou.net>

Since we broke the ABI by changing the clock, the driver was also
updated to use the regmap provided by the TCU driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
---

Notes:
     v6: New patch
    
     v7: No change

     v8: No change

 drivers/watchdog/jz4740_wdt.c | 30 ++++++++++++++----------------
 1 file changed, 14 insertions(+), 16 deletions(-)

diff --git a/drivers/watchdog/jz4740_wdt.c b/drivers/watchdog/jz4740_wdt.c
index 1d504ecf45e1..0f54306aee25 100644
--- a/drivers/watchdog/jz4740_wdt.c
+++ b/drivers/watchdog/jz4740_wdt.c
@@ -13,6 +13,7 @@
  *
  */
 
+#include <linux/mfd/ingenic-tcu.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/types.h>
@@ -25,10 +26,7 @@
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/of.h>
-
-#define JZ_REG_WDT_TIMER_DATA     0x0
-#define JZ_REG_WDT_COUNTER_ENABLE 0x4
-#define JZ_REG_WDT_TIMER_COUNTER  0x8
+#include <linux/regmap.h>
 
 #define DEFAULT_HEARTBEAT 5
 #define MAX_HEARTBEAT     2048
@@ -48,7 +46,7 @@ MODULE_PARM_DESC(heartbeat,
 
 struct jz4740_wdt_drvdata {
 	struct watchdog_device wdt;
-	void __iomem *base;
+	struct regmap *map;
 	struct clk *clk;
 	unsigned long clk_rate;
 };
@@ -57,7 +55,7 @@ static int jz4740_wdt_ping(struct watchdog_device *wdt_dev)
 {
 	struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
 
-	writew(0x0, drvdata->base + JZ_REG_WDT_TIMER_COUNTER);
+	regmap_write(drvdata->map, TCU_REG_WDT_TCNT, 0);
 	return 0;
 }
 
@@ -67,12 +65,12 @@ static int jz4740_wdt_set_timeout(struct watchdog_device *wdt_dev,
 	struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
 	u16 timeout_value = (u16)(drvdata->clk_rate * new_timeout);
 
-	writeb(0x0, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE);
+	regmap_write(drvdata->map, TCU_REG_WDT_TCER, 0);
 
-	writew((u16)timeout_value, drvdata->base + JZ_REG_WDT_TIMER_DATA);
-	writew(0x0, drvdata->base + JZ_REG_WDT_TIMER_COUNTER);
+	regmap_write(drvdata->map, TCU_REG_WDT_TDR, timeout_value);
+	regmap_write(drvdata->map, TCU_REG_WDT_TCNT, 0);
 
-	writeb(0x1, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE);
+	regmap_write(drvdata->map, TCU_REG_WDT_TCER, TCU_WDT_TCER_TCEN);
 
 	wdt_dev->timeout = new_timeout;
 	return 0;
@@ -96,7 +94,7 @@ static int jz4740_wdt_stop(struct watchdog_device *wdt_dev)
 {
 	struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
 
-	writeb(0x0, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE);
+	regmap_write(drvdata->map, TCU_REG_WDT_TCER, 0);
 	clk_disable_unprepare(drvdata->clk);
 
 	return 0;
@@ -138,7 +136,6 @@ static int jz4740_wdt_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct jz4740_wdt_drvdata *drvdata;
 	struct watchdog_device *jz4740_wdt;
-	struct resource	*res;
 	long rate;
 	int ret;
 
@@ -174,10 +171,11 @@ static int jz4740_wdt_probe(struct platform_device *pdev)
 	watchdog_set_nowayout(jz4740_wdt, nowayout);
 	watchdog_set_drvdata(jz4740_wdt, drvdata);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	drvdata->base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(drvdata->base))
-		return PTR_ERR(drvdata->base);
+	drvdata->map = dev_get_regmap(dev->parent, NULL);
+	if (!drvdata->map) {
+		dev_err(dev, "regmap not found\n");
+		return -EINVAL;
+	}
 
 	ret = devm_watchdog_register_device(&pdev->dev, &drvdata->wdt);
 	if (ret < 0)
-- 
2.11.0


  parent reply	other threads:[~2018-12-12 22:19 UTC|newest]

Thread overview: 66+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-12 22:08 [PATCH v8 00/26] Ingenic TCU patchset v8 Paul Cercueil
2018-12-12 22:08 ` [PATCH v8 01/26] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
2018-12-17 23:18   ` Stephen Boyd
2018-12-12 22:08 ` [PATCH v8 02/26] doc: Add doc for the Ingenic TCU hardware Paul Cercueil
2018-12-12 22:08 ` [PATCH v8 03/26] dt-bindings: Add doc for the Ingenic TCU drivers Paul Cercueil
2018-12-17 21:05   ` Rob Herring
2018-12-17 22:03     ` Paul Cercueil
2018-12-18 16:36       ` Rob Herring
2018-12-22 11:09         ` Paul Cercueil
2018-12-12 22:08 ` [PATCH v8 04/26] clocksource: Add a new timer-ingenic driver Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST Paul Cercueil
2019-01-23 12:58   ` Mathieu Malaterre
2019-01-23 14:31     ` Guenter Roeck
2019-01-23 17:25       ` Paul Cercueil
2019-01-23 18:01         ` Guenter Roeck
2019-01-24 19:28           ` Stephen Boyd
2019-01-24 20:46             ` Paul Cercueil
2019-01-24 22:46               ` Stephen Boyd
2019-01-24 22:53                 ` Paul Cercueil
2019-02-23  3:17                   ` Paul Cercueil
2019-02-25 18:05                     ` Stephen Boyd
2019-02-27 23:54                       ` Paul Cercueil
2019-01-23 17:27     ` Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 06/26] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 07/26] watchdog: jz4740: Use WDT clock provided by TCU driver Paul Cercueil
2018-12-12 22:09 ` Paul Cercueil [this message]
2018-12-12 22:09 ` [PATCH v8 09/26] watchdog: jz4740: Avoid starting watchdog in set_timeout Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 10/26] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 11/26] pwm: jz4740: Use regmap and clocks from TCU driver Paul Cercueil
2018-12-13  9:30   ` Uwe Kleine-König
2018-12-13 14:34     ` Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 12/26] pwm: jz4740: Allow selection of PWM channels 0 and 1 Paul Cercueil
2018-12-13  9:18   ` Uwe Kleine-König
2018-12-13 13:58     ` Paul Cercueil
2018-12-13 20:32       ` Uwe Kleine-König
2018-12-16 13:36         ` Paul Cercueil
2018-12-17  7:43           ` Uwe Kleine-König
2018-12-12 22:09 ` [PATCH v8 13/26] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 14/26] pwm: jz4740: Remove unused devicetree compatible strings Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B Paul Cercueil
2018-12-13  9:24   ` Uwe Kleine-König
2018-12-13 14:03     ` Paul Cercueil
2018-12-13 16:18       ` Thierry Reding
2018-12-13 20:42       ` Uwe Kleine-König
2018-12-14 13:50         ` Linus Walleij
2018-12-14 14:26           ` Uwe Kleine-König
2018-12-14 14:56             ` Linus Walleij
2018-12-16 14:18             ` Paul Cercueil
2018-12-17  7:53               ` Uwe Kleine-König
2018-12-20 17:39                 ` Thierry Reding
2018-12-20 20:58                   ` Uwe Kleine-König
2018-12-12 22:09 ` [PATCH v8 16/26] clk: jz4740: Add TCU clock Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 17/26] MIPS: Kconfig: Select TCU timer driver when MACH_INGENIC is set Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 18/26] MIPS: jz4740: Add DTS nodes for the TCU drivers Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 19/26] MIPS: qi_lb60: Move PWM devices to devicetree Paul Cercueil
2018-12-12 22:09 ` [PATCH v8 20/26] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz Paul Cercueil
2018-12-12 22:12 ` [PATCH v8 21/26] MIPS: CI20: Reduce system timer and clocksource to 3 MHz Paul Cercueil
2018-12-12 22:12 ` [PATCH v8 22/26] MIPS: CI20: defconfig: enable OST driver Paul Cercueil
2018-12-12 22:13 ` [PATCH v8 23/26] MIPS: GCW0: Move clocksource to TCU channel 2 Paul Cercueil
2018-12-12 22:13 ` [PATCH v8 24/26] MIPS: GCW0: Reduce system timer and clocksource to 750 kHz Paul Cercueil
2018-12-12 22:14 ` [PATCH v8 25/26] MIPS: GCW0: defconfig: Enable OST, watchdog, PWM drivers Paul Cercueil
2018-12-12 22:15 ` [PATCH v8 26/26] MIPS: jz4740: Drop obsolete code Paul Cercueil
2019-01-24 21:26 ` [PATCH v8 00/26] Ingenic TCU patchset v8 Mathieu Malaterre
2019-01-24 21:41   ` Paul Cercueil
2019-01-25  8:21     ` Mathieu Malaterre
2019-01-25 17:04       ` Paul Cercueil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181212220922.18759-9-paul@crapouillou.net \
    --to=paul@crapouillou.net \
    --cc=corbet@lwn.net \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=ezequiel@collabora.co.uk \
    --cc=jhogan@kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=malat@debian.org \
    --cc=mark.rutland@arm.com \
    --cc=od@zcrc.me \
    --cc=paul.burton@mips.com \
    --cc=prasannatsmkumar@gmail.com \
    --cc=ralf@linux-mips.org \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).