* [PATCH] MIPS: Select PINCTRL_RT2880 when RALINK is enabled
@ 2019-01-29 15:25 Nishad Kamdar
2019-01-29 20:09 ` Paul Burton
0 siblings, 1 reply; 3+ messages in thread
From: Nishad Kamdar @ 2019-01-29 15:25 UTC (permalink / raw)
To: Greg Kroah-Hartman, NeilBrown
Cc: Ralf Baechle, Paul Burton, James Hogan, Joe Perches,
Matthias Brugger, Sergio Paracuellos, Kees Cook, devel,
Nishad Kamdar, linux-arm-kernel, linux-mediatek, linux-mips,
linux-kernel
This patch selects config PINCTRL_RT2880 when config RALINK is
enabled as per drivers/staging/mt7621-pinctrl/TODO list. PINCTRL
is also selected when RALINK is enabled to avoid config dependency
warnings.
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
---
arch/mips/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e2fc88da0223..cea529cf6284 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -623,6 +623,8 @@ config RALINK
select CLKDEV_LOOKUP
select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
+ select PINCTRL
+ select PINCTRL_RT2880
config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)"
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] MIPS: Select PINCTRL_RT2880 when RALINK is enabled
2019-01-29 15:25 [PATCH] MIPS: Select PINCTRL_RT2880 when RALINK is enabled Nishad Kamdar
@ 2019-01-29 20:09 ` Paul Burton
2019-01-30 14:26 ` Nishad Kamdar
0 siblings, 1 reply; 3+ messages in thread
From: Paul Burton @ 2019-01-29 20:09 UTC (permalink / raw)
To: Nishad Kamdar
Cc: Greg Kroah-Hartman, NeilBrown, Ralf Baechle, James Hogan,
Joe Perches, Matthias Brugger, Sergio Paracuellos, Kees Cook,
devel, linux-arm-kernel, linux-mediatek, linux-mips,
linux-kernel
Hi Nishad,
On Tue, Jan 29, 2019 at 08:55:27PM +0530, Nishad Kamdar wrote:
> This patch selects config PINCTRL_RT2880 when config RALINK is
> enabled as per drivers/staging/mt7621-pinctrl/TODO list. PINCTRL
> is also selected when RALINK is enabled to avoid config dependency
> warnings.
>
> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
> ---
> arch/mips/Kconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index e2fc88da0223..cea529cf6284 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -623,6 +623,8 @@ config RALINK
> select CLKDEV_LOOKUP
> select ARCH_HAS_RESET_CONTROLLER
> select RESET_CONTROLLER
> + select PINCTRL
> + select PINCTRL_RT2880
>
> config SGI_IP22
> bool "SGI IP22 (Indy/Indigo2)"
Wouldn't this also require selecting STAGING? Perhaps that's why it
wasn't done in the first place?
Thanks,
Paul
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] MIPS: Select PINCTRL_RT2880 when RALINK is enabled
2019-01-29 20:09 ` Paul Burton
@ 2019-01-30 14:26 ` Nishad Kamdar
0 siblings, 0 replies; 3+ messages in thread
From: Nishad Kamdar @ 2019-01-30 14:26 UTC (permalink / raw)
To: Paul Burton
Cc: Greg Kroah-Hartman, NeilBrown, Ralf Baechle, James Hogan,
Joe Perches, Matthias Brugger, Sergio Paracuellos, Kees Cook,
devel, linux-arm-kernel, linux-mediatek, linux-mips,
linux-kernel
On Tue, Jan 29, 2019 at 08:09:07PM +0000, Paul Burton wrote:
> Hi Nishad,
>
> On Tue, Jan 29, 2019 at 08:55:27PM +0530, Nishad Kamdar wrote:
> > This patch selects config PINCTRL_RT2880 when config RALINK is
> > enabled as per drivers/staging/mt7621-pinctrl/TODO list. PINCTRL
> > is also selected when RALINK is enabled to avoid config dependency
> > warnings.
> >
> > Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
> > ---
> > arch/mips/Kconfig | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> > index e2fc88da0223..cea529cf6284 100644
> > --- a/arch/mips/Kconfig
> > +++ b/arch/mips/Kconfig
> > @@ -623,6 +623,8 @@ config RALINK
> > select CLKDEV_LOOKUP
> > select ARCH_HAS_RESET_CONTROLLER
> > select RESET_CONTROLLER
> > + select PINCTRL
> > + select PINCTRL_RT2880
> >
> > config SGI_IP22
> > bool "SGI IP22 (Indy/Indigo2)"
>
> Wouldn't this also require selecting STAGING? Perhaps that's why it
> wasn't done in the first place?
>
> Thanks,
> Paul
Ok, got it.
Thanks for the review.
Regards,
Nishad
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-01-30 14:26 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-29 15:25 [PATCH] MIPS: Select PINCTRL_RT2880 when RALINK is enabled Nishad Kamdar
2019-01-29 20:09 ` Paul Burton
2019-01-30 14:26 ` Nishad Kamdar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).