Linux-MIPS Archive on lore.kernel.org
 help / color / Atom feed
From: Christoph Hellwig <hch@lst.de>
To: iommu@lists.linux-foundation.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Lee Jones <lee.jones@linaro.org>,
	x86@kernel.org, linux-snps-arc@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org, linux-mips@vger.kernel.org,
	linuxppc-dev@lists.ozlabs.org, linux-riscv@lists.infradead.org,
	linux-sh@vger.kernel.org, linux-xtensa@linux-xtensa.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 07/12] dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig
Date: Mon, 11 Feb 2019 14:35:49 +0100
Message-ID: <20190211133554.30055-8-hch@lst.de> (raw)
In-Reply-To: <20190211133554.30055-1-hch@lst.de>

This is where all the related code already lives.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/base/Kconfig | 77 --------------------------------------------
 kernel/dma/Kconfig   | 77 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 77 insertions(+), 77 deletions(-)

diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index 3e63a900b330..059700ea3521 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -191,83 +191,6 @@ config DMA_FENCE_TRACE
 	  lockup related problems for dma-buffers shared across multiple
 	  devices.
 
-config DMA_CMA
-	bool "DMA Contiguous Memory Allocator"
-	depends on HAVE_DMA_CONTIGUOUS && CMA
-	help
-	  This enables the Contiguous Memory Allocator which allows drivers
-	  to allocate big physically-contiguous blocks of memory for use with
-	  hardware components that do not support I/O map nor scatter-gather.
-
-	  You can disable CMA by specifying "cma=0" on the kernel's command
-	  line.
-
-	  For more information see <include/linux/dma-contiguous.h>.
-	  If unsure, say "n".
-
-if  DMA_CMA
-comment "Default contiguous memory area size:"
-
-config CMA_SIZE_MBYTES
-	int "Size in Mega Bytes"
-	depends on !CMA_SIZE_SEL_PERCENTAGE
-	default 0 if X86
-	default 16
-	help
-	  Defines the size (in MiB) of the default memory area for Contiguous
-	  Memory Allocator.  If the size of 0 is selected, CMA is disabled by
-	  default, but it can be enabled by passing cma=size[MG] to the kernel.
-
-
-config CMA_SIZE_PERCENTAGE
-	int "Percentage of total memory"
-	depends on !CMA_SIZE_SEL_MBYTES
-	default 0 if X86
-	default 10
-	help
-	  Defines the size of the default memory area for Contiguous Memory
-	  Allocator as a percentage of the total memory in the system.
-	  If 0 percent is selected, CMA is disabled by default, but it can be
-	  enabled by passing cma=size[MG] to the kernel.
-
-choice
-	prompt "Selected region size"
-	default CMA_SIZE_SEL_MBYTES
-
-config CMA_SIZE_SEL_MBYTES
-	bool "Use mega bytes value only"
-
-config CMA_SIZE_SEL_PERCENTAGE
-	bool "Use percentage value only"
-
-config CMA_SIZE_SEL_MIN
-	bool "Use lower value (minimum)"
-
-config CMA_SIZE_SEL_MAX
-	bool "Use higher value (maximum)"
-
-endchoice
-
-config CMA_ALIGNMENT
-	int "Maximum PAGE_SIZE order of alignment for contiguous buffers"
-	range 4 12
-	default 8
-	help
-	  DMA mapping framework by default aligns all buffers to the smallest
-	  PAGE_SIZE order which is greater than or equal to the requested buffer
-	  size. This works well for buffers up to a few hundreds kilobytes, but
-	  for larger buffers it just a memory waste. With this parameter you can
-	  specify the maximum PAGE_SIZE order for contiguous buffers. Larger
-	  buffers will be aligned only to this specified order. The order is
-	  expressed as a power of two multiplied by the PAGE_SIZE.
-
-	  For example, if your system defaults to 4KiB pages, the order value
-	  of 8 means that the buffers will be aligned up to 1MiB only.
-
-	  If unsure, leave the default value "8".
-
-endif
-
 config GENERIC_ARCH_TOPOLOGY
 	bool
 	help
diff --git a/kernel/dma/Kconfig b/kernel/dma/Kconfig
index b122ab100d66..d785286ad868 100644
--- a/kernel/dma/Kconfig
+++ b/kernel/dma/Kconfig
@@ -53,3 +53,80 @@ config DMA_REMAP
 config DMA_DIRECT_REMAP
 	bool
 	select DMA_REMAP
+
+config DMA_CMA
+	bool "DMA Contiguous Memory Allocator"
+	depends on HAVE_DMA_CONTIGUOUS && CMA
+	help
+	  This enables the Contiguous Memory Allocator which allows drivers
+	  to allocate big physically-contiguous blocks of memory for use with
+	  hardware components that do not support I/O map nor scatter-gather.
+
+	  You can disable CMA by specifying "cma=0" on the kernel's command
+	  line.
+
+	  For more information see <include/linux/dma-contiguous.h>.
+	  If unsure, say "n".
+
+if  DMA_CMA
+comment "Default contiguous memory area size:"
+
+config CMA_SIZE_MBYTES
+	int "Size in Mega Bytes"
+	depends on !CMA_SIZE_SEL_PERCENTAGE
+	default 0 if X86
+	default 16
+	help
+	  Defines the size (in MiB) of the default memory area for Contiguous
+	  Memory Allocator.  If the size of 0 is selected, CMA is disabled by
+	  default, but it can be enabled by passing cma=size[MG] to the kernel.
+
+
+config CMA_SIZE_PERCENTAGE
+	int "Percentage of total memory"
+	depends on !CMA_SIZE_SEL_MBYTES
+	default 0 if X86
+	default 10
+	help
+	  Defines the size of the default memory area for Contiguous Memory
+	  Allocator as a percentage of the total memory in the system.
+	  If 0 percent is selected, CMA is disabled by default, but it can be
+	  enabled by passing cma=size[MG] to the kernel.
+
+choice
+	prompt "Selected region size"
+	default CMA_SIZE_SEL_MBYTES
+
+config CMA_SIZE_SEL_MBYTES
+	bool "Use mega bytes value only"
+
+config CMA_SIZE_SEL_PERCENTAGE
+	bool "Use percentage value only"
+
+config CMA_SIZE_SEL_MIN
+	bool "Use lower value (minimum)"
+
+config CMA_SIZE_SEL_MAX
+	bool "Use higher value (maximum)"
+
+endchoice
+
+config CMA_ALIGNMENT
+	int "Maximum PAGE_SIZE order of alignment for contiguous buffers"
+	range 4 12
+	default 8
+	help
+	  DMA mapping framework by default aligns all buffers to the smallest
+	  PAGE_SIZE order which is greater than or equal to the requested buffer
+	  size. This works well for buffers up to a few hundreds kilobytes, but
+	  for larger buffers it just a memory waste. With this parameter you can
+	  specify the maximum PAGE_SIZE order for contiguous buffers. Larger
+	  buffers will be aligned only to this specified order. The order is
+	  expressed as a power of two multiplied by the PAGE_SIZE.
+
+	  For example, if your system defaults to 4KiB pages, the order value
+	  of 8 means that the buffers will be aligned up to 1MiB only.
+
+	  If unsure, leave the default value "8".
+
+endif
-- 
2.20.1


  parent reply index

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-11 13:35 dma_declare_coherent spring cleaning Christoph Hellwig
2019-02-11 13:35 ` [PATCH 01/12] mfd/sm501: depend on HAS_DMA Christoph Hellwig
2019-02-13  7:29   ` Lee Jones
2019-02-13 18:17     ` Christoph Hellwig
2019-02-11 13:35 ` [PATCH 02/12] device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT Christoph Hellwig
2019-02-12  7:49   ` Greg Kroah-Hartman
2019-02-11 13:35 ` [PATCH 03/12] of: mark early_init_dt_alloc_reserved_memory_arch static Christoph Hellwig
2019-02-12 20:24   ` Rob Herring
2019-02-13 18:16     ` Christoph Hellwig
2019-02-11 13:35 ` [PATCH 04/12] of: select OF_RESERVED_MEM automatically Christoph Hellwig
2019-02-12 20:11   ` Rob Herring
2019-02-11 13:35 ` [PATCH 05/12] dma-mapping: remove an incorrect __iommem annotation Christoph Hellwig
2019-02-11 13:35 ` [PATCH 06/12] dma-mapping: improve selection of dma_declare_coherent availability Christoph Hellwig
2019-02-12  2:17   ` Paul Burton
2019-02-12  7:49   ` Greg Kroah-Hartman
2019-02-12 20:40   ` Rob Herring
2019-02-13 18:24     ` Christoph Hellwig
2019-02-13 19:27       ` Rob Herring
2019-02-13  7:27   ` Lee Jones
2019-02-11 13:35 ` Christoph Hellwig [this message]
2019-02-12  7:50   ` [PATCH 07/12] dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig Greg Kroah-Hartman
2019-02-11 13:35 ` [PATCH 08/12] dma-mapping: remove dma_mark_declared_memory_occupied Christoph Hellwig
2019-02-11 13:35 ` [PATCH 09/12] dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag Christoph Hellwig
2019-02-12  7:50   ` Greg Kroah-Hartman
2019-02-11 13:35 ` [PATCH 10/12] dma-mapping: simplify allocations from per-device coherent memory Christoph Hellwig
2019-02-11 13:35 ` [PATCH 11/12] dma-mapping: handle per-device coherent memory mmap in common code Christoph Hellwig
2019-02-11 13:35 ` [PATCH 12/12] dma-mapping: remove dma_assign_coherent_memory Christoph Hellwig

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190211133554.30055-8-hch@lst.de \
    --to=hch@lst.de \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=linux-snps-arc@lists.infradead.org \
    --cc=linux-xtensa@linux-xtensa.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-MIPS Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mips/0 linux-mips/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mips linux-mips/ https://lore.kernel.org/linux-mips \
		linux-mips@vger.kernel.org linux-mips@archiver.kernel.org
	public-inbox-index linux-mips

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-mips


AGPL code for this site: git clone https://public-inbox.org/ public-inbox