From: Paul Cercueil <paul@crapouillou.net>
To: Ralf Baechle <ralf@linux-mips.org>,
Paul Burton <paul.burton@mips.com>,
James Hogan <jhogan@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>
Cc: od@zcrc.me, linux-mips@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH 5/5] MIPS: Remove dead code
Date: Tue, 7 May 2019 21:34:21 +0200 [thread overview]
Message-ID: <20190507193421.12260-5-paul@crapouillou.net> (raw)
In-Reply-To: <20190507193421.12260-1-paul@crapouillou.net>
Remove the unused <asm/mach-jz4740/clock.h> include.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
arch/mips/include/asm/mach-jz4740/clock.h | 31 -----------------------
arch/mips/jz4740/board-qi_lb60.c | 2 --
arch/mips/jz4740/platform.c | 2 --
arch/mips/jz4740/time.c | 3 ---
4 files changed, 38 deletions(-)
delete mode 100644 arch/mips/include/asm/mach-jz4740/clock.h
diff --git a/arch/mips/include/asm/mach-jz4740/clock.h b/arch/mips/include/asm/mach-jz4740/clock.h
deleted file mode 100644
index 104d2dfe1e36..000000000000
--- a/arch/mips/include/asm/mach-jz4740/clock.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef __ASM_JZ4740_CLOCK_H__
-#define __ASM_JZ4740_CLOCK_H__
-
-enum jz4740_wait_mode {
- JZ4740_WAIT_MODE_IDLE,
- JZ4740_WAIT_MODE_SLEEP,
-};
-
-void jz4740_clock_set_wait_mode(enum jz4740_wait_mode mode);
-
-void jz4740_clock_suspend(void);
-void jz4740_clock_resume(void);
-
-void jz4740_clock_udc_enable_auto_suspend(void);
-void jz4740_clock_udc_disable_auto_suspend(void);
-
-#endif
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 6718efb400f4..b418b23ff1d1 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -40,8 +40,6 @@
#include <asm/mach-jz4740/platform.h>
-#include "clock.h"
-
/* GPIOs */
#define QI_LB60_GPIO_KEYOUT(x) (JZ_GPIO_PORTC(10) + (x))
#define QI_LB60_GPIO_KEYIN(x) (JZ_GPIO_PORTD(18) + (x))
diff --git a/arch/mips/jz4740/platform.c b/arch/mips/jz4740/platform.c
index cbc5f8e87230..cf9c66031199 100644
--- a/arch/mips/jz4740/platform.c
+++ b/arch/mips/jz4740/platform.c
@@ -30,8 +30,6 @@
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
-#include "clock.h"
-
/* USB Device Controller */
struct platform_device jz4740_udc_xceiv_device = {
.name = "usb_phy_generic",
diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
index 2ca9160f642a..32cdde0cad01 100644
--- a/arch/mips/jz4740/time.c
+++ b/arch/mips/jz4740/time.c
@@ -22,13 +22,10 @@
#include <linux/clockchips.h>
#include <linux/sched_clock.h>
-#include <asm/mach-jz4740/clock.h>
#include <asm/mach-jz4740/irq.h>
#include <asm/mach-jz4740/timer.h>
#include <asm/time.h>
-#include "clock.h"
-
#define TIMER_CLOCKEVENT 0
#define TIMER_CLOCKSOURCE 1
--
2.21.0.593.g511ec345e18
next prev parent reply other threads:[~2019-05-07 19:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-07 19:34 [PATCH 1/5] clk: ingenic: Add missing header in cgu.h Paul Cercueil
2019-05-07 19:34 ` [PATCH 2/5] clk: ingenic: Handle setting the Low-Power Mode bit Paul Cercueil
2019-05-07 19:34 ` [PATCH 3/5] MIPS: jz4740: PM: Let CGU driver suspend clocks and set sleep mode Paul Cercueil
2019-05-07 19:34 ` [PATCH 4/5] clk: ingenic: Remove unused functions Paul Cercueil
2019-05-07 19:34 ` Paul Cercueil [this message]
2019-05-07 20:19 ` [PATCH 1/5] clk: ingenic: Add missing header in cgu.h Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190507193421.12260-5-paul@crapouillou.net \
--to=paul@crapouillou.net \
--cc=jhogan@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=od@zcrc.me \
--cc=paul.burton@mips.com \
--cc=ralf@linux-mips.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).