From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Paul Burton <paul.burton@mips.com>,
Ralf Baechle <ralf@linux-mips.org>,
James Hogan <jhogan@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Jay Cliburn <jcliburn@gmail.com>,
Chris Snook <chris.snook@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Mark Rutland <mark.rutland@arm.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, John Crispin <john@phrozen.org>,
Felix Fietkau <nbd@nbd.name>,
netdev@vger.kernel.org, Andrew Lunn <andrew@lunn.ch>,
Chuanhong Guo <gch981213@gmail.com>,
info@freifunk-bad-gandersheim.net
Subject: [PATCH v4 2/3] MIPS: ath79: ar9331: add Ethernet nodes
Date: Sun, 19 May 2019 10:03:03 +0200 [thread overview]
Message-ID: <20190519080304.5811-3-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20190519080304.5811-1-o.rempel@pengutronix.de>
Add ethernet nodes supported by ag71xx driver.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/mips/boot/dts/qca/ar9331.dtsi | 26 ++++++++++++++++++++
arch/mips/boot/dts/qca/ar9331_dpt_module.dts | 8 ++++++
2 files changed, 34 insertions(+)
diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi
index 2bae201aa365..63a9f33aa43e 100644
--- a/arch/mips/boot/dts/qca/ar9331.dtsi
+++ b/arch/mips/boot/dts/qca/ar9331.dtsi
@@ -116,6 +116,32 @@
};
};
+ eth0: ethernet@19000000 {
+ compatible = "qca,ar9330-eth";
+ reg = <0x19000000 0x200>;
+ interrupts = <4>;
+
+ resets = <&rst 9>, <&rst 22>;
+ reset-names = "mac", "mdio";
+ clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
+ clock-names = "eth", "mdio";
+
+ status = "disabled";
+ };
+
+ eth1: ethernet@1a000000 {
+ compatible = "qca,ar9330-eth";
+ reg = <0x1a000000 0x200>;
+ interrupts = <5>;
+
+ resets = <&rst 13>, <&rst 23>;
+ reset-names = "mac", "mdio";
+ clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
+ clock-names = "eth", "mdio";
+
+ status = "disabled";
+ };
+
usb: usb@1b000100 {
compatible = "chipidea,usb2";
reg = <0x1b000000 0x200>;
diff --git a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
index e7af2cf5f4c1..77bab823eb3b 100644
--- a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
+++ b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
@@ -76,3 +76,11 @@
reg = <0>;
};
};
+
+ð0 {
+ status = "okay";
+};
+
+ð1 {
+ status = "okay";
+};
--
2.20.1
next prev parent reply other threads:[~2019-05-19 17:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-19 8:03 [PATCH v4 0/3] MIPS: ath79: add ag71xx support Oleksij Rempel
2019-05-19 8:03 ` [PATCH v4 1/3] dt-bindings: net: add qca,ar71xx.txt documentation Oleksij Rempel
2019-05-19 8:03 ` Oleksij Rempel [this message]
2019-05-19 8:03 ` [PATCH v4 3/3] net: ethernet: add ag71xx driver Oleksij Rempel
2019-05-20 0:33 ` Andrew Lunn
2019-05-20 7:05 ` Oleksij Rempel
2019-05-20 0:33 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190519080304.5811-3-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=andrew@lunn.ch \
--cc=chris.snook@gmail.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=gch981213@gmail.com \
--cc=info@freifunk-bad-gandersheim.net \
--cc=jcliburn@gmail.com \
--cc=jhogan@kernel.org \
--cc=john@phrozen.org \
--cc=kernel@pengutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nbd@nbd.name \
--cc=netdev@vger.kernel.org \
--cc=paul.burton@mips.com \
--cc=ralf@linux-mips.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).