Linux-MIPS Archive on lore.kernel.org
 help / color / Atom feed
From: Paul Cercueil <paul@crapouillou.net>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Ralf Baechle <ralf@linux-mips.org>,
	Paul Burton <paul.burton@mips.com>,
	James Hogan <jhogan@kernel.org>, Jonathan Corbet <corbet@lwn.net>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Jason Cooper <jason@lakedaemon.net>,
	Marc Zyngier <marc.zyngier@arm.com>,
	Lee Jones <lee.jones@linaro.org>
Cc: Mathieu Malaterre <malat@debian.org>,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-mips@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-clk@vger.kernel.org, od@zcrc.me,
	Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH v12 04/13] mfd: Add Ingenic TCU driver
Date: Tue, 21 May 2019 16:51:32 +0200
Message-ID: <20190521145141.9813-5-paul@crapouillou.net> (raw)
In-Reply-To: <20190521145141.9813-1-paul@crapouillou.net>

This driver will provide a regmap that can be retrieved very early in
the boot process through the API function ingenic_tcu_get_regmap().

Additionally, it will call devm_of_platform_populate() so that all the
children devices will be probed.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---

Notes:
    v12: New patch

 drivers/mfd/Kconfig             |   8 +++
 drivers/mfd/Makefile            |   1 +
 drivers/mfd/ingenic-tcu.c       | 113 ++++++++++++++++++++++++++++++++
 include/linux/mfd/ingenic-tcu.h |   8 +++
 4 files changed, 130 insertions(+)
 create mode 100644 drivers/mfd/ingenic-tcu.c

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 294d9567cc71..a13544474e05 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -494,6 +494,14 @@ config HTC_I2CPLD
 	  This device provides input and output GPIOs through an I2C
 	  interface to one or more sub-chips.
 
+config INGENIC_TCU
+	bool "Ingenic Timer/Counter Unit (TCU) support"
+	depends on MIPS || COMPILE_TEST
+	select REGMAP_MMIO
+	help
+	  Say yes here to support the Timer/Counter Unit (TCU) IP present
+	  in the JZ47xx SoCs from Ingenic.
+
 config MFD_INTEL_QUARK_I2C_GPIO
 	tristate "Intel Quark MFD I2C GPIO"
 	depends on PCI
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 52b1a90ff515..fb89e131ae98 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -180,6 +180,7 @@ obj-$(CONFIG_AB8500_CORE)	+= ab8500-core.o ab8500-sysctrl.o
 obj-$(CONFIG_MFD_TIMBERDALE)    += timberdale.o
 obj-$(CONFIG_PMIC_ADP5520)	+= adp5520.o
 obj-$(CONFIG_MFD_KEMPLD)	+= kempld-core.o
+obj-$(CONFIG_INGENIC_TCU)	+= ingenic-tcu.o
 obj-$(CONFIG_MFD_INTEL_QUARK_I2C_GPIO)	+= intel_quark_i2c_gpio.o
 obj-$(CONFIG_LPC_SCH)		+= lpc_sch.o
 obj-$(CONFIG_LPC_ICH)		+= lpc_ich.o
diff --git a/drivers/mfd/ingenic-tcu.c b/drivers/mfd/ingenic-tcu.c
new file mode 100644
index 000000000000..6c1d5e4310c1
--- /dev/null
+++ b/drivers/mfd/ingenic-tcu.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ47xx SoCs TCU MFD driver
+ * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/mfd/ingenic-tcu.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+struct ingenic_soc_info {
+	unsigned int num_channels;
+};
+
+static struct regmap *tcu_regmap __initdata;
+
+static const struct regmap_config ingenic_tcu_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = TCU_REG_OST_CNTHBUF,
+};
+
+static const struct ingenic_soc_info jz4740_soc_info = {
+	.num_channels = 8,
+};
+
+static const struct ingenic_soc_info jz4725b_soc_info = {
+	.num_channels = 6,
+};
+
+static const struct of_device_id ingenic_tcu_of_match[] = {
+	{ .compatible = "ingenic,jz4740-tcu", .data = &jz4740_soc_info, },
+	{ .compatible = "ingenic,jz4725b-tcu", .data = &jz4725b_soc_info, },
+	{ .compatible = "ingenic,jz4770-tcu", .data = &jz4740_soc_info, },
+	{ }
+};
+
+static struct regmap * __init ingenic_tcu_create_regmap(struct device_node *np)
+{
+	struct resource res;
+	void __iomem *base;
+	struct regmap *map;
+
+	if (!of_match_node(ingenic_tcu_of_match, np))
+		return ERR_PTR(-EINVAL);
+
+	base = of_io_request_and_map(np, 0, "TCU");
+	if (IS_ERR(base))
+		return ERR_PTR(PTR_ERR(base));
+
+	map = regmap_init_mmio(NULL, base, &ingenic_tcu_regmap_config);
+	if (IS_ERR(map))
+		goto err_iounmap;
+
+	return map;
+
+err_iounmap:
+	iounmap(base);
+	of_address_to_resource(np, 0, &res);
+	release_mem_region(res.start, resource_size(&res));
+
+	return map;
+}
+
+static int __init ingenic_tcu_probe(struct platform_device *pdev)
+{
+	struct regmap *map = ingenic_tcu_get_regmap(pdev->dev.of_node);
+
+	platform_set_drvdata(pdev, map);
+
+	regmap_attach_dev(&pdev->dev, map, &ingenic_tcu_regmap_config);
+
+	return devm_of_platform_populate(&pdev->dev);
+}
+
+static struct platform_driver ingenic_tcu_driver = {
+	.driver = {
+		.name = "ingenic-tcu",
+		.of_match_table = ingenic_tcu_of_match,
+	},
+};
+
+static int __init ingenic_tcu_platform_init(void)
+{
+	return platform_driver_probe(&ingenic_tcu_driver,
+				     ingenic_tcu_probe);
+}
+subsys_initcall(ingenic_tcu_platform_init);
+
+struct regmap * __init ingenic_tcu_get_regmap(struct device_node *np)
+{
+	if (!tcu_regmap)
+		tcu_regmap = ingenic_tcu_create_regmap(np);
+
+	return tcu_regmap;
+}
+
+bool ingenic_tcu_pwm_can_use_chn(struct device *dev, unsigned int channel)
+{
+	const struct ingenic_soc_info *soc = device_get_match_data(dev->parent);
+
+	/* Enable all TCU channels for PWM use by default except channels 0/1 */
+	u32 pwm_channels_mask = GENMASK(soc->num_channels - 1, 2);
+
+	device_property_read_u32(dev->parent, "ingenic,pwm-channels-mask",
+				 &pwm_channels_mask);
+
+	return !!(pwm_channels_mask & BIT(channel));
+}
+EXPORT_SYMBOL_GPL(ingenic_tcu_pwm_can_use_chn);
diff --git a/include/linux/mfd/ingenic-tcu.h b/include/linux/mfd/ingenic-tcu.h
index 2083fa20821d..21df23916cd2 100644
--- a/include/linux/mfd/ingenic-tcu.h
+++ b/include/linux/mfd/ingenic-tcu.h
@@ -6,6 +6,11 @@
 #define __LINUX_MFD_INGENIC_TCU_H_
 
 #include <linux/bitops.h>
+#include <linux/init.h>
+
+struct device;
+struct device_node;
+struct regmap;
 
 #define TCU_REG_WDT_TDR		0x00
 #define TCU_REG_WDT_TCER	0x04
@@ -53,4 +58,7 @@
 #define TCU_REG_TCNTc(c)	(TCU_REG_TCNT0 + ((c) * TCU_CHANNEL_STRIDE))
 #define TCU_REG_TCSRc(c)	(TCU_REG_TCSR0 + ((c) * TCU_CHANNEL_STRIDE))
 
+struct regmap * __init ingenic_tcu_get_regmap(struct device_node *np);
+bool ingenic_tcu_pwm_can_use_chn(struct device *dev, unsigned int channel);
+
 #endif /* __LINUX_MFD_INGENIC_TCU_H_ */
-- 
2.21.0.593.g511ec345e18


  parent reply index

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-21 14:51 Ingenic Timer/Counter Unit (TCU) patchset v12 Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 01/13] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 02/13] doc: Add doc for the Ingenic TCU hardware Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 03/13] dt-bindings: Add doc for the Ingenic TCU drivers Paul Cercueil
2019-05-24 20:21   ` Rob Herring
2019-05-25 19:13     ` Paul Cercueil
2019-06-11 14:57       ` Rob Herring
2019-05-21 14:51 ` Paul Cercueil [this message]
2019-06-22 12:21   ` [PATCH v12 04/13] mfd: Add Ingenic TCU driver Paul Cercueil
2019-06-26 13:18   ` Lee Jones
2019-06-26 13:55     ` Paul Cercueil
2019-06-27  6:58       ` Lee Jones
2019-06-27  8:49         ` Paul Cercueil
2019-06-27  9:01           ` Lee Jones
2019-06-27  9:19             ` Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 05/13] clk: ingenic: Add driver for the TCU clocks Paul Cercueil
2019-06-07 21:28   ` Stephen Boyd
2019-06-07 21:59     ` Paul Cercueil
2019-06-07 22:50       ` Stephen Boyd
2019-05-21 14:51 ` [PATCH v12 06/13] irqchip: Add irq-ingenic-tcu driver Paul Cercueil
2019-06-22 12:22   ` Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 07/13] clocksource: Add a new timer-ingenic driver Paul Cercueil
2019-06-22 12:23   ` Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 08/13] clk: jz4740: Add TCU clock Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 09/13] MIPS: jz4740: Add DTS nodes for the TCU drivers Paul Cercueil
2019-05-22  9:21   ` Mathieu Malaterre
2019-05-22 11:15     ` Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 10/13] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 11/13] MIPS: CI20: Reduce system timer and clocksource to 3 MHz Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 12/13] MIPS: GCW0: Reduce system timer and clocksource to 750 kHz Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 13/13] MIPS: jz4740: Drop obsolete code Paul Cercueil
2019-05-27 11:39 ` Ingenic Timer/Counter Unit (TCU) patchset v12 Mathieu Malaterre

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190521145141.9813-5-paul@crapouillou.net \
    --to=paul@crapouillou.net \
    --cc=corbet@lwn.net \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=jhogan@kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=malat@debian.org \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=od@zcrc.me \
    --cc=paul.burton@mips.com \
    --cc=ralf@linux-mips.org \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-MIPS Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mips/0 linux-mips/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mips linux-mips/ https://lore.kernel.org/linux-mips \
		linux-mips@vger.kernel.org linux-mips@archiver.kernel.org
	public-inbox-index linux-mips

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-mips


AGPL code for this site: git clone https://public-inbox.org/ public-inbox