Linux-MIPS Archive on lore.kernel.org
 help / color / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: Paul Cercueil <paul@crapouillou.net>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Ralf Baechle <ralf@linux-mips.org>,
	Paul Burton <paul.burton@mips.com>,
	James Hogan <jhogan@kernel.org>, Jonathan Corbet <corbet@lwn.net>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Jason Cooper <jason@lakedaemon.net>,
	Marc Zyngier <marc.zyngier@arm.com>,
	Mathieu Malaterre <malat@debian.org>,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-mips@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-clk@vger.kernel.org, od@zcrc.me
Subject: Re: [PATCH v12 04/13] mfd: Add Ingenic TCU driver
Date: Wed, 26 Jun 2019 14:18:50 +0100
Message-ID: <20190626131850.GW21119@dell> (raw)
In-Reply-To: <20190521145141.9813-5-paul@crapouillou.net>

On Tue, 21 May 2019, Paul Cercueil wrote:

> This driver will provide a regmap that can be retrieved very early in
> the boot process through the API function ingenic_tcu_get_regmap().
> 
> Additionally, it will call devm_of_platform_populate() so that all the
> children devices will be probed.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
> 
> Notes:
>     v12: New patch
> 
>  drivers/mfd/Kconfig             |   8 +++
>  drivers/mfd/Makefile            |   1 +
>  drivers/mfd/ingenic-tcu.c       | 113 ++++++++++++++++++++++++++++++++
>  include/linux/mfd/ingenic-tcu.h |   8 +++
>  4 files changed, 130 insertions(+)
>  create mode 100644 drivers/mfd/ingenic-tcu.c
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 294d9567cc71..a13544474e05 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -494,6 +494,14 @@ config HTC_I2CPLD
>  	  This device provides input and output GPIOs through an I2C
>  	  interface to one or more sub-chips.
>  
> +config INGENIC_TCU
> +	bool "Ingenic Timer/Counter Unit (TCU) support"
> +	depends on MIPS || COMPILE_TEST
> +	select REGMAP_MMIO
> +	help
> +	  Say yes here to support the Timer/Counter Unit (TCU) IP present
> +	  in the JZ47xx SoCs from Ingenic.
> +
>  config MFD_INTEL_QUARK_I2C_GPIO
>  	tristate "Intel Quark MFD I2C GPIO"
>  	depends on PCI
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 52b1a90ff515..fb89e131ae98 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -180,6 +180,7 @@ obj-$(CONFIG_AB8500_CORE)	+= ab8500-core.o ab8500-sysctrl.o
>  obj-$(CONFIG_MFD_TIMBERDALE)    += timberdale.o
>  obj-$(CONFIG_PMIC_ADP5520)	+= adp5520.o
>  obj-$(CONFIG_MFD_KEMPLD)	+= kempld-core.o
> +obj-$(CONFIG_INGENIC_TCU)	+= ingenic-tcu.o
>  obj-$(CONFIG_MFD_INTEL_QUARK_I2C_GPIO)	+= intel_quark_i2c_gpio.o
>  obj-$(CONFIG_LPC_SCH)		+= lpc_sch.o
>  obj-$(CONFIG_LPC_ICH)		+= lpc_ich.o
> diff --git a/drivers/mfd/ingenic-tcu.c b/drivers/mfd/ingenic-tcu.c
> new file mode 100644
> index 000000000000..6c1d5e4310c1
> --- /dev/null
> +++ b/drivers/mfd/ingenic-tcu.c
> @@ -0,0 +1,113 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * JZ47xx SoCs TCU MFD driver

Nit: Another line here please.

> + * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
> + */
> +
> +#include <linux/mfd/ingenic-tcu.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +struct ingenic_soc_info {
> +	unsigned int num_channels;
> +};
> +
> +static struct regmap *tcu_regmap __initdata;
> +
> +static const struct regmap_config ingenic_tcu_regmap_config = {
> +	.reg_bits = 32,
> +	.val_bits = 32,
> +	.reg_stride = 4,
> +	.max_register = TCU_REG_OST_CNTHBUF,
> +};
> +
> +static const struct ingenic_soc_info jz4740_soc_info = {
> +	.num_channels = 8,
> +};
> +
> +static const struct ingenic_soc_info jz4725b_soc_info = {
> +	.num_channels = 6,
> +};
> +
> +static const struct of_device_id ingenic_tcu_of_match[] = {
> +	{ .compatible = "ingenic,jz4740-tcu", .data = &jz4740_soc_info, },
> +	{ .compatible = "ingenic,jz4725b-tcu", .data = &jz4725b_soc_info, },
> +	{ .compatible = "ingenic,jz4770-tcu", .data = &jz4740_soc_info, },
> +	{ }
> +};
> +
> +static struct regmap * __init ingenic_tcu_create_regmap(struct device_node *np)
> +{
> +	struct resource res;
> +	void __iomem *base;
> +	struct regmap *map;
> +
> +	if (!of_match_node(ingenic_tcu_of_match, np))
> +		return ERR_PTR(-EINVAL);
> +
> +	base = of_io_request_and_map(np, 0, "TCU");
> +	if (IS_ERR(base))
> +		return ERR_PTR(PTR_ERR(base));
> +
> +	map = regmap_init_mmio(NULL, base, &ingenic_tcu_regmap_config);
> +	if (IS_ERR(map))
> +		goto err_iounmap;
> +
> +	return map;
> +
> +err_iounmap:
> +	iounmap(base);
> +	of_address_to_resource(np, 0, &res);
> +	release_mem_region(res.start, resource_size(&res));
> +
> +	return map;
> +}

Why does this need to be set-up earlier than probe()?

> +static int __init ingenic_tcu_probe(struct platform_device *pdev)
> +{
> +	struct regmap *map = ingenic_tcu_get_regmap(pdev->dev.of_node);
> +
> +	platform_set_drvdata(pdev, map);
> +
> +	regmap_attach_dev(&pdev->dev, map, &ingenic_tcu_regmap_config);
> +
> +	return devm_of_platform_populate(&pdev->dev);
> +}
> +
> +static struct platform_driver ingenic_tcu_driver = {
> +	.driver = {
> +		.name = "ingenic-tcu",
> +		.of_match_table = ingenic_tcu_of_match,
> +	},
> +};
> +
> +static int __init ingenic_tcu_platform_init(void)
> +{
> +	return platform_driver_probe(&ingenic_tcu_driver,
> +				     ingenic_tcu_probe);

What?  Why?

> +}
> +subsys_initcall(ingenic_tcu_platform_init);
> +
> +struct regmap * __init ingenic_tcu_get_regmap(struct device_node *np)
> +{
> +	if (!tcu_regmap)
> +		tcu_regmap = ingenic_tcu_create_regmap(np);
> +
> +	return tcu_regmap;
> +}

This makes me pretty uncomfortable.

What calls it?

> +bool ingenic_tcu_pwm_can_use_chn(struct device *dev, unsigned int channel)
> +{
> +	const struct ingenic_soc_info *soc = device_get_match_data(dev->parent);
> +
> +	/* Enable all TCU channels for PWM use by default except channels 0/1 */
> +	u32 pwm_channels_mask = GENMASK(soc->num_channels - 1, 2);
> +
> +	device_property_read_u32(dev->parent, "ingenic,pwm-channels-mask",
> +				 &pwm_channels_mask);
> +
> +	return !!(pwm_channels_mask & BIT(channel));
> +}
> +EXPORT_SYMBOL_GPL(ingenic_tcu_pwm_can_use_chn);
> diff --git a/include/linux/mfd/ingenic-tcu.h b/include/linux/mfd/ingenic-tcu.h
> index 2083fa20821d..21df23916cd2 100644
> --- a/include/linux/mfd/ingenic-tcu.h
> +++ b/include/linux/mfd/ingenic-tcu.h
> @@ -6,6 +6,11 @@
>  #define __LINUX_MFD_INGENIC_TCU_H_
>  
>  #include <linux/bitops.h>
> +#include <linux/init.h>
> +
> +struct device;
> +struct device_node;
> +struct regmap;
>  
>  #define TCU_REG_WDT_TDR		0x00
>  #define TCU_REG_WDT_TCER	0x04
> @@ -53,4 +58,7 @@
>  #define TCU_REG_TCNTc(c)	(TCU_REG_TCNT0 + ((c) * TCU_CHANNEL_STRIDE))
>  #define TCU_REG_TCSRc(c)	(TCU_REG_TCSR0 + ((c) * TCU_CHANNEL_STRIDE))
>  
> +struct regmap * __init ingenic_tcu_get_regmap(struct device_node *np);
> +bool ingenic_tcu_pwm_can_use_chn(struct device *dev, unsigned int channel);
> +
>  #endif /* __LINUX_MFD_INGENIC_TCU_H_ */

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  parent reply index

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-21 14:51 Ingenic Timer/Counter Unit (TCU) patchset v12 Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 01/13] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 02/13] doc: Add doc for the Ingenic TCU hardware Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 03/13] dt-bindings: Add doc for the Ingenic TCU drivers Paul Cercueil
2019-05-24 20:21   ` Rob Herring
2019-05-25 19:13     ` Paul Cercueil
2019-06-11 14:57       ` Rob Herring
2019-05-21 14:51 ` [PATCH v12 04/13] mfd: Add Ingenic TCU driver Paul Cercueil
2019-06-22 12:21   ` Paul Cercueil
2019-06-26 13:18   ` Lee Jones [this message]
2019-06-26 13:55     ` Paul Cercueil
2019-06-27  6:58       ` Lee Jones
2019-06-27  8:49         ` Paul Cercueil
2019-06-27  9:01           ` Lee Jones
2019-06-27  9:19             ` Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 05/13] clk: ingenic: Add driver for the TCU clocks Paul Cercueil
2019-06-07 21:28   ` Stephen Boyd
2019-06-07 21:59     ` Paul Cercueil
2019-06-07 22:50       ` Stephen Boyd
2019-05-21 14:51 ` [PATCH v12 06/13] irqchip: Add irq-ingenic-tcu driver Paul Cercueil
2019-06-22 12:22   ` Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 07/13] clocksource: Add a new timer-ingenic driver Paul Cercueil
2019-06-22 12:23   ` Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 08/13] clk: jz4740: Add TCU clock Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 09/13] MIPS: jz4740: Add DTS nodes for the TCU drivers Paul Cercueil
2019-05-22  9:21   ` Mathieu Malaterre
2019-05-22 11:15     ` Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 10/13] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 11/13] MIPS: CI20: Reduce system timer and clocksource to 3 MHz Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 12/13] MIPS: GCW0: Reduce system timer and clocksource to 750 kHz Paul Cercueil
2019-05-21 14:51 ` [PATCH v12 13/13] MIPS: jz4740: Drop obsolete code Paul Cercueil
2019-05-27 11:39 ` Ingenic Timer/Counter Unit (TCU) patchset v12 Mathieu Malaterre

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190626131850.GW21119@dell \
    --to=lee.jones@linaro.org \
    --cc=corbet@lwn.net \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=jhogan@kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=malat@debian.org \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=od@zcrc.me \
    --cc=paul.burton@mips.com \
    --cc=paul@crapouillou.net \
    --cc=ralf@linux-mips.org \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-MIPS Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mips/0 linux-mips/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mips linux-mips/ https://lore.kernel.org/linux-mips \
		linux-mips@vger.kernel.org
	public-inbox-index linux-mips

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-mips


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git