[PATCH AUTOSEL 4.14 1/8] MIPS: ath79: fix ar933x uart parity mode

[PATCH AUTOSEL 4.14 1/8] MIPS: ath79: fix ar933x uart parity mode

[Sasha Levin]

From: Stefan Hellermann <stefan@the2masters.de>

[ Upstream commit db13a5ba2732755cf13320f3987b77cf2a71e790 ]

While trying to get the uart with parity working I found setting even
parity enabled odd parity insted. Fix the register settings to match
the datasheet of AR9331.

A similar patch was created by 8devices, but not sent upstream.
https://github.com/8devices/openwrt-8devices/commit/77c5586ade3bb72cda010afad3f209ed0c98ea7c

Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/mach-ath79/ar933x_uart.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/mach-ath79/ar933x_uart.h b/arch/mips/include/asm/mach-ath79/ar933x_uart.h
index c2917b39966b..bba2c8837951 100644
--- a/arch/mips/include/asm/mach-ath79/ar933x_uart.h
+++ b/arch/mips/include/asm/mach-ath79/ar933x_uart.h
@@ -27,8 +27,8 @@
 #define AR933X_UART_CS_PARITY_S		0
 #define AR933X_UART_CS_PARITY_M		0x3
 #define	  AR933X_UART_CS_PARITY_NONE	0
-#define	  AR933X_UART_CS_PARITY_ODD	1
-#define	  AR933X_UART_CS_PARITY_EVEN	2
+#define	  AR933X_UART_CS_PARITY_ODD	2
+#define	  AR933X_UART_CS_PARITY_EVEN	3
 #define AR933X_UART_CS_IF_MODE_S	2
 #define AR933X_UART_CS_IF_MODE_M	0x3
 #define	  AR933X_UART_CS_IF_MODE_NONE	0
-- 
2.20.1

[PATCH AUTOSEL 4.14 2/8] MIPS: fix build on non-linux hosts

[Sasha Levin]

From: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>

[ Upstream commit 1196364f21ffe5d1e6d83cafd6a2edb89404a3ae ]

calc_vmlinuz_load_addr.c requires SZ_64K to be defined for alignment
purposes.  It included "../../../../include/linux/sizes.h" to define
that size, however "sizes.h" tries to include <linux/const.h> which
assumes linux system headers.  These may not exist eg. the following
error was encountered when building Linux for OpenWrt under macOS:

In file included from arch/mips/boot/compressed/calc_vmlinuz_load_addr.c:16:
arch/mips/boot/compressed/../../../../include/linux/sizes.h:11:10: fatal error: 'linux/const.h' file not found
         ^~~~~~~~~~

Change makefile to force building on local linux headers instead of
system headers.  Also change eye-watering relative reference in include
file spec.

Thanks to Jo-Philip Wich & Petr Štetiar for assistance in tracking this
down & fixing.

Suggested-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/boot/compressed/Makefile                 | 2 ++
 arch/mips/boot/compressed/calc_vmlinuz_load_addr.c | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index adce180f3ee4..331b9e0a8072 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -75,6 +75,8 @@ OBJCOPYFLAGS_piggy.o := --add-section=.image=$(obj)/vmlinux.bin.z \
 $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE
 	$(call if_changed,objcopy)
 
+HOSTCFLAGS_calc_vmlinuz_load_addr.o += $(LINUXINCLUDE)
+
 # Calculate the load address of the compressed kernel image
 hostprogs-y := calc_vmlinuz_load_addr
 
diff --git a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
index 542c3ede9722..d14f75ec8273 100644
--- a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
+++ b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
@@ -13,7 +13,7 @@
 #include <stdint.h>
 #include <stdio.h>
 #include <stdlib.h>
-#include "../../../../include/linux/sizes.h"
+#include <linux/sizes.h>
 
 int main(int argc, char *argv[])
 {
-- 
2.20.1