From: Thomas Bogendoerfer <tbogendoerfer@suse.de>
To: Jonathan Corbet <corbet@lwn.net>,
Ralf Baechle <ralf@linux-mips.org>,
Paul Burton <paul.burton@mips.com>,
James Hogan <jhogan@kernel.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Lee Jones <lee.jones@linaro.org>,
"David S. Miller" <davem@davemloft.net>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jslaby@suse.com>, Evgeniy Polyakov <zbr@ioremap.net>,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mips@vger.kernel.org, linux-input@vger.kernel.org,
netdev@vger.kernel.org, linux-rtc@vger.kernel.org,
linux-serial@vger.kernel.org
Subject: [PATCH v5 00/17] Use MFD framework for SGI IOC3 drivers
Date: Mon, 19 Aug 2019 18:31:23 +0200 [thread overview]
Message-ID: <20190819163144.3478-1-tbogendoerfer@suse.de> (raw)
GI IOC3 ASIC includes support for ethernet, PS2 keyboard/mouse,
NIC (number in a can), GPIO and a byte bus. By attaching a
SuperIO chip to it, it also supports serial lines and a parallel
port. The chip is used on a variety of SGI systems with different
configurations. This patchset moves code out of the network driver,
which doesn't belong there, into its new place a MFD driver and
specific platform drivers for the different subfunctions.
Changes in v5:
- requested by Jakub I've splitted ioc3 ethernet driver changes into
more steps to make the transition more visible; on the way there
I've "checkpatched" the driver and reduced code reorderings
- dropped all uint16_t and uint32_t
- added nvmem API extension to the documenation file
- changed to use request_irq/free_irq in serio driver
- removed wrong kfree() in serio error path
Changes in v4:
- added w1 drivers to the series after merge in 5.3 failed because
of no response from maintainer and other parts of this series
won't work without that drivers
- moved ip30 systemboard support to the ip30 series, which will
deal with rtc oddity Lee found
- converted to use devm_platform_ioremap_resource
- use PLATFORM_DEVID_AUTO for serial, ethernet and serio in mfd driver
- fixed reverse christmas order in ioc3-eth.c
- formating issue found by Lee
- re-worked irq request/free in serio driver to avoid crashes during
probe/remove
Changes in v3:
- use 1-wire subsystem for handling proms
- pci-xtalk driver uses prom information to create PCI subsystem
ids for use in MFD driver
- changed MFD driver to only use static declared mfd_cells
- added IP30 system board setup to MFD driver
- mac address is now read from ioc3-eth driver with nvmem framework
Changes in v2:
- fixed issue in ioc3kbd.c reported by Dmitry Torokhov
- merged IP27 RTC removal and 8250 serial driver addition into
main MFD patch to keep patches bisectable
Thomas Bogendoerfer (17):
w1: add 1-wire master driver for IP block found in SGI ASICs
w1: add DS2501, DS2502, DS2505 EPROM device driver
nvmem: core: add nvmem_device_find
MIPS: PCI: refactor ioc3 special handling
MIPS: PCI: use information from 1-wire PROM for IOC3 detection
MIPS: SGI-IP27: remove ioc3 ethernet init
MIPS: SGI-IP27: restructure ioc3 register access
net: sgi: ioc3-eth: remove checkpatch errors/warning
net: sgi: ioc3-eth: use defines for constants dealing with desc rings
net: sgi: ioc3-eth: rework skb rx handling
net: sgi: ioc3-eth: no need to stop queue set_multicast_list
net: sgi: ioc3-eth: use dma-direct for dma allocations
net: sgi: ioc3-eth: use csum_fold
net: sgi: ioc3-eth: Fix IPG settings
mfd: ioc3: Add driver for SGI IOC3 chip
MIPS: SGI-IP27: fix readb/writeb addressing
Input: add IOC3 serio driver
Documentation/driver-api/nvmem.rst | 2 +
arch/mips/include/asm/mach-ip27/mangle-port.h | 4 +-
arch/mips/include/asm/pci/bridge.h | 1 +
arch/mips/include/asm/sn/ioc3.h | 364 +++----
arch/mips/pci/pci-xtalk-bridge.c | 296 ++++--
arch/mips/sgi-ip27/ip27-console.c | 5 +-
arch/mips/sgi-ip27/ip27-init.c | 13 -
arch/mips/sgi-ip27/ip27-timer.c | 20 -
arch/mips/sgi-ip27/ip27-xtalk.c | 38 +-
drivers/input/serio/Kconfig | 10 +
drivers/input/serio/Makefile | 1 +
drivers/input/serio/ioc3kbd.c | 160 +++
drivers/mfd/Kconfig | 13 +
drivers/mfd/Makefile | 1 +
drivers/mfd/ioc3.c | 586 +++++++++++
drivers/net/ethernet/sgi/Kconfig | 4 +-
drivers/net/ethernet/sgi/ioc3-eth.c | 1405 +++++++++----------------
drivers/nvmem/core.c | 62 +-
drivers/rtc/rtc-m48t35.c | 11 +
drivers/tty/serial/8250/8250_ioc3.c | 98 ++
drivers/tty/serial/8250/Kconfig | 11 +
drivers/tty/serial/8250/Makefile | 1 +
drivers/w1/masters/Kconfig | 9 +
drivers/w1/masters/Makefile | 1 +
drivers/w1/masters/sgi_w1.c | 130 +++
drivers/w1/slaves/Kconfig | 6 +
drivers/w1/slaves/Makefile | 1 +
drivers/w1/slaves/w1_ds250x.c | 293 ++++++
include/linux/nvmem-consumer.h | 9 +
include/linux/platform_data/sgi-w1.h | 15 +
include/linux/w1.h | 2 +
31 files changed, 2266 insertions(+), 1306 deletions(-)
create mode 100644 drivers/input/serio/ioc3kbd.c
create mode 100644 drivers/mfd/ioc3.c
create mode 100644 drivers/tty/serial/8250/8250_ioc3.c
create mode 100644 drivers/w1/masters/sgi_w1.c
create mode 100644 drivers/w1/slaves/w1_ds250x.c
create mode 100644 include/linux/platform_data/sgi-w1.h
--
2.13.7
next reply other threads:[~2019-08-19 16:34 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-19 16:31 Thomas Bogendoerfer [this message]
2019-08-19 16:31 ` [PATCH v5 01/17] w1: add 1-wire master driver for IP block found in SGI ASICs Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 02/17] w1: add DS2501, DS2502, DS2505 EPROM device driver Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 03/17] nvmem: core: add nvmem_device_find Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 04/17] MIPS: PCI: refactor ioc3 special handling Thomas Bogendoerfer
2019-09-03 9:10 ` Paul Burton
2019-08-19 16:31 ` [PATCH v5 05/17] MIPS: PCI: use information from 1-wire PROM for IOC3 detection Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 06/17] MIPS: SGI-IP27: remove ioc3 ethernet init Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 07/17] MIPS: SGI-IP27: restructure ioc3 register access Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 08/17] net: sgi: ioc3-eth: remove checkpatch errors/warning Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 09/17] net: sgi: ioc3-eth: use defines for constants dealing with desc rings Thomas Bogendoerfer
2019-08-19 23:53 ` Jakub Kicinski
2019-08-19 16:31 ` [PATCH v5 10/17] net: sgi: ioc3-eth: rework skb rx handling Thomas Bogendoerfer
2019-08-19 23:55 ` Jakub Kicinski
2019-08-21 14:28 ` Thomas Bogendoerfer
2019-08-21 20:37 ` Jakub Kicinski
2019-08-19 16:31 ` [PATCH v5 11/17] net: sgi: ioc3-eth: no need to stop queue set_multicast_list Thomas Bogendoerfer
2019-08-20 0:04 ` Jakub Kicinski
2019-08-21 12:40 ` Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 12/17] net: sgi: ioc3-eth: use dma-direct for dma allocations Thomas Bogendoerfer
2019-08-20 0:07 ` Jakub Kicinski
2019-08-19 16:31 ` [PATCH v5 13/17] net: sgi: ioc3-eth: use csum_fold Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 14/17] net: sgi: ioc3-eth: Fix IPG settings Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 15/17] mfd: ioc3: Add driver for SGI IOC3 chip Thomas Bogendoerfer
2019-08-20 6:23 ` Alexandre Belloni
2019-08-20 8:17 ` Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 16/17] MIPS: SGI-IP27: fix readb/writeb addressing Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 17/17] Input: add IOC3 serio driver Thomas Bogendoerfer
2019-08-19 23:51 ` [PATCH v5 00/17] Use MFD framework for SGI IOC3 drivers Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190819163144.3478-1-tbogendoerfer@suse.de \
--to=tbogendoerfer@suse.de \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=dmitry.torokhov@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jhogan@kernel.org \
--cc=jslaby@suse.com \
--cc=lee.jones@linaro.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=paul.burton@mips.com \
--cc=ralf@linux-mips.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=zbr@ioremap.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).