linux-mips.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v5 00/17] Use MFD framework for SGI IOC3 drivers
@ 2019-08-19 16:31 Thomas Bogendoerfer
  2019-08-19 16:31 ` [PATCH v5 01/17] w1: add 1-wire master driver for IP block found in SGI ASICs Thomas Bogendoerfer
                   ` (17 more replies)
  0 siblings, 18 replies; 29+ messages in thread
From: Thomas Bogendoerfer @ 2019-08-19 16:31 UTC (permalink / raw)
  To: Jonathan Corbet, Ralf Baechle, Paul Burton, James Hogan,
	Dmitry Torokhov, Lee Jones, David S. Miller, Srinivas Kandagatla,
	Alessandro Zummo, Alexandre Belloni, Greg Kroah-Hartman,
	Jiri Slaby, Evgeniy Polyakov, linux-doc, linux-kernel,
	linux-mips, linux-input, netdev, linux-rtc, linux-serial

GI IOC3 ASIC includes support for ethernet, PS2 keyboard/mouse,
NIC (number in a can), GPIO and a byte  bus. By attaching a
SuperIO chip to it, it also supports serial lines and a parallel
port. The chip is used on a variety of SGI systems with different
configurations. This patchset moves code out of the network driver,
which doesn't belong there, into its new place a MFD driver and
specific platform drivers for the different subfunctions.

Changes in v5:
 - requested by Jakub I've splitted ioc3 ethernet driver changes into
   more steps to make the transition more visible; on the way there 
   I've "checkpatched" the driver and reduced code reorderings
 - dropped all uint16_t and uint32_t
 - added nvmem API extension to the documenation file
 - changed to use request_irq/free_irq in serio driver
 - removed wrong kfree() in serio error path

Changes in v4:
 - added w1 drivers to the series after merge in 5.3 failed because
   of no response from maintainer and other parts of this series
   won't work without that drivers
 - moved ip30 systemboard support to the ip30 series, which will
   deal with rtc oddity Lee found
 - converted to use devm_platform_ioremap_resource
 - use PLATFORM_DEVID_AUTO for serial, ethernet and serio in mfd driver
 - fixed reverse christmas order in ioc3-eth.c
 - formating issue found by Lee
 - re-worked irq request/free in serio driver to avoid crashes during
   probe/remove

Changes in v3:
 - use 1-wire subsystem for handling proms
 - pci-xtalk driver uses prom information to create PCI subsystem
   ids for use in MFD driver
 - changed MFD driver to only use static declared mfd_cells
 - added IP30 system board setup to MFD driver
 - mac address is now read from ioc3-eth driver with nvmem framework

Changes in v2:
 - fixed issue in ioc3kbd.c reported by Dmitry Torokhov
 - merged IP27 RTC removal and 8250 serial driver addition into
   main MFD patch to keep patches bisectable

Thomas Bogendoerfer (17):
  w1: add 1-wire master driver for IP block found in SGI ASICs
  w1: add DS2501, DS2502, DS2505 EPROM device driver
  nvmem: core: add nvmem_device_find
  MIPS: PCI: refactor ioc3 special handling
  MIPS: PCI: use information from 1-wire PROM for IOC3 detection
  MIPS: SGI-IP27: remove ioc3 ethernet init
  MIPS: SGI-IP27: restructure ioc3 register access
  net: sgi: ioc3-eth: remove checkpatch errors/warning
  net: sgi: ioc3-eth: use defines for constants dealing with desc rings
  net: sgi: ioc3-eth: rework skb rx handling
  net: sgi: ioc3-eth: no need to stop queue set_multicast_list
  net: sgi: ioc3-eth: use dma-direct for dma allocations
  net: sgi: ioc3-eth: use csum_fold
  net: sgi: ioc3-eth: Fix IPG settings
  mfd: ioc3: Add driver for SGI IOC3 chip
  MIPS: SGI-IP27: fix readb/writeb addressing
  Input: add IOC3 serio driver

 Documentation/driver-api/nvmem.rst            |    2 +
 arch/mips/include/asm/mach-ip27/mangle-port.h |    4 +-
 arch/mips/include/asm/pci/bridge.h            |    1 +
 arch/mips/include/asm/sn/ioc3.h               |  364 +++----
 arch/mips/pci/pci-xtalk-bridge.c              |  296 ++++--
 arch/mips/sgi-ip27/ip27-console.c             |    5 +-
 arch/mips/sgi-ip27/ip27-init.c                |   13 -
 arch/mips/sgi-ip27/ip27-timer.c               |   20 -
 arch/mips/sgi-ip27/ip27-xtalk.c               |   38 +-
 drivers/input/serio/Kconfig                   |   10 +
 drivers/input/serio/Makefile                  |    1 +
 drivers/input/serio/ioc3kbd.c                 |  160 +++
 drivers/mfd/Kconfig                           |   13 +
 drivers/mfd/Makefile                          |    1 +
 drivers/mfd/ioc3.c                            |  586 +++++++++++
 drivers/net/ethernet/sgi/Kconfig              |    4 +-
 drivers/net/ethernet/sgi/ioc3-eth.c           | 1405 +++++++++----------------
 drivers/nvmem/core.c                          |   62 +-
 drivers/rtc/rtc-m48t35.c                      |   11 +
 drivers/tty/serial/8250/8250_ioc3.c           |   98 ++
 drivers/tty/serial/8250/Kconfig               |   11 +
 drivers/tty/serial/8250/Makefile              |    1 +
 drivers/w1/masters/Kconfig                    |    9 +
 drivers/w1/masters/Makefile                   |    1 +
 drivers/w1/masters/sgi_w1.c                   |  130 +++
 drivers/w1/slaves/Kconfig                     |    6 +
 drivers/w1/slaves/Makefile                    |    1 +
 drivers/w1/slaves/w1_ds250x.c                 |  293 ++++++
 include/linux/nvmem-consumer.h                |    9 +
 include/linux/platform_data/sgi-w1.h          |   15 +
 include/linux/w1.h                            |    2 +
 31 files changed, 2266 insertions(+), 1306 deletions(-)
 create mode 100644 drivers/input/serio/ioc3kbd.c
 create mode 100644 drivers/mfd/ioc3.c
 create mode 100644 drivers/tty/serial/8250/8250_ioc3.c
 create mode 100644 drivers/w1/masters/sgi_w1.c
 create mode 100644 drivers/w1/slaves/w1_ds250x.c
 create mode 100644 include/linux/platform_data/sgi-w1.h

-- 
2.13.7


^ permalink raw reply	[flat|nested] 29+ messages in thread

end of thread, other threads:[~2019-09-03  9:11 UTC | newest]

Thread overview: 29+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-19 16:31 [PATCH v5 00/17] Use MFD framework for SGI IOC3 drivers Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 01/17] w1: add 1-wire master driver for IP block found in SGI ASICs Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 02/17] w1: add DS2501, DS2502, DS2505 EPROM device driver Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 03/17] nvmem: core: add nvmem_device_find Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 04/17] MIPS: PCI: refactor ioc3 special handling Thomas Bogendoerfer
2019-09-03  9:10   ` Paul Burton
2019-08-19 16:31 ` [PATCH v5 05/17] MIPS: PCI: use information from 1-wire PROM for IOC3 detection Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 06/17] MIPS: SGI-IP27: remove ioc3 ethernet init Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 07/17] MIPS: SGI-IP27: restructure ioc3 register access Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 08/17] net: sgi: ioc3-eth: remove checkpatch errors/warning Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 09/17] net: sgi: ioc3-eth: use defines for constants dealing with desc rings Thomas Bogendoerfer
2019-08-19 23:53   ` Jakub Kicinski
2019-08-19 16:31 ` [PATCH v5 10/17] net: sgi: ioc3-eth: rework skb rx handling Thomas Bogendoerfer
2019-08-19 23:55   ` Jakub Kicinski
2019-08-21 14:28     ` Thomas Bogendoerfer
2019-08-21 20:37       ` Jakub Kicinski
2019-08-19 16:31 ` [PATCH v5 11/17] net: sgi: ioc3-eth: no need to stop queue set_multicast_list Thomas Bogendoerfer
2019-08-20  0:04   ` Jakub Kicinski
2019-08-21 12:40     ` Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 12/17] net: sgi: ioc3-eth: use dma-direct for dma allocations Thomas Bogendoerfer
2019-08-20  0:07   ` Jakub Kicinski
2019-08-19 16:31 ` [PATCH v5 13/17] net: sgi: ioc3-eth: use csum_fold Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 14/17] net: sgi: ioc3-eth: Fix IPG settings Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 15/17] mfd: ioc3: Add driver for SGI IOC3 chip Thomas Bogendoerfer
2019-08-20  6:23   ` Alexandre Belloni
2019-08-20  8:17     ` Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 16/17] MIPS: SGI-IP27: fix readb/writeb addressing Thomas Bogendoerfer
2019-08-19 16:31 ` [PATCH v5 17/17] Input: add IOC3 serio driver Thomas Bogendoerfer
2019-08-19 23:51 ` [PATCH v5 00/17] Use MFD framework for SGI IOC3 drivers Jakub Kicinski

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).