Linux-MIPS Archive on lore.kernel.org
 help / color / Atom feed
From: Jiaxun Yang <jiaxun.yang@flygoat.com>
To: linux-mips@vger.kernel.org
Cc: chenhc@lemote.com, paul.burton@mips.com, tglx@linutronix.de,
	jason@lakedaemon.net, maz@kernel.org,
	linux-kernel@vger.kernel.org, robh+dt@kernel.org,
	mark.rutland@arm.co, devicetree@vger.kernel.org,
	Jiaxun Yang <jiaxun.yang@flygoat.com>
Subject: [PATCH v1 07/18] irqchip: Add driver for Loongson-3 HyperTransport interrupt controller
Date: Fri, 30 Aug 2019 12:32:21 +0800
Message-ID: <20190830043232.20191-2-jiaxun.yang@flygoat.com> (raw)
In-Reply-To: <20190830043232.20191-1-jiaxun.yang@flygoat.com>

This controller appeared on Loongson-3 family of chips to receive interrupts
from PCH chip.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
 drivers/irqchip/Kconfig          |   8 ++
 drivers/irqchip/Makefile         |   1 +
 drivers/irqchip/irq-ls3-htintc.c | 147 +++++++++++++++++++++++++++++++
 3 files changed, 156 insertions(+)
 create mode 100644 drivers/irqchip/irq-ls3-htintc.c

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 8d9eac5fd4a7..b3ce0f3e43ae 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -480,6 +480,14 @@ config LS3_IOINTC
 	help
 	  Support for the Loongson-3 I/O Interrupt Controller.
 
+config LS3_HTINTC
+	bool "Loongson3 HyperTransport Interrupt Controller"
+	depends on MACH_LOONGSON64
+	default y
+	select IRQ_DOMAIN
+	select GENERIC_IRQ_CHIP
+	help
+	  Support for the Loongson-3 HyperTransport Interrupt Controller.
 endmenu
 
 config SIFIVE_PLIC
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 49ecb8d38138..0fda94c319e9 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -103,3 +103,4 @@ obj-$(CONFIG_LS1X_IRQ)			+= irq-ls1x.o
 obj-$(CONFIG_TI_SCI_INTR_IRQCHIP)	+= irq-ti-sci-intr.o
 obj-$(CONFIG_TI_SCI_INTA_IRQCHIP)	+= irq-ti-sci-inta.o
 obj-$(CONFIG_LS3_IOINTC)			+= irq-ls3-iointc.o
+obj-$(CONFIG_LS3_HTINTC)			+= irq-ls3-htintc.o
diff --git a/drivers/irqchip/irq-ls3-htintc.c b/drivers/irqchip/irq-ls3-htintc.c
new file mode 100644
index 000000000000..d5013606faa8
--- /dev/null
+++ b/drivers/irqchip/irq-ls3-htintc.c
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2019, Jiaxun Yang <jiaxun.yang@flygoat.com>
+ *  Loongson-3 HyperTransport IRQ support
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/irqchip.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/irqchip/chained_irq.h>
+
+#define HTINTC_NUM_GC  4
+#define HTINTC_GC_SIZE  0x4
+#define HTINTC_NUM_HANDLER  4
+#define HTINTC_HANDLER_SIZE  0x8
+#define HTINTC_HANDLER_IRQ  64
+
+#define HTINTC_VECTOR_OFFSET   0x0
+#define HTINTC_EN_OFFSET   0x20
+
+struct htintc_handler_priv {
+	struct irq_domain	*domain;
+	void __iomem		*handler_base;
+};
+
+static void htintc_chained_handle_irq(struct irq_desc *desc)
+{
+	struct htintc_handler_priv *priv = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	int i;
+	bool handled = false;
+
+	chained_irq_enter(chip, desc);
+
+	for (i = 0; i < HTINTC_NUM_GC; i++) {
+		uint32_t irqs = readl(priv->handler_base + HTINTC_GC_SIZE * i);
+
+		while (irqs) {
+			int bit = __ffs(irqs);
+
+			generic_handle_irq(irq_find_mapping(priv->domain, bit + 32 * i));
+			irqs &= ~BIT(bit);
+			handled = true;
+		}
+	}
+
+	if (!handled)
+		spurious_interrupt();
+
+	chained_irq_exit(chip, desc);
+}
+
+int __init ls3_htintc_of_init(struct device_node *node,
+					   struct device_node *parent)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	struct htintc_handler_priv *priv;
+	struct irq_domain *domain;
+	void __iomem *base;
+	int parent_irq[HTINTC_NUM_HANDLER], err = 0;
+	int i;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	base = of_iomap(node, 0);
+	if (!base) {
+		err = -ENODEV;
+		goto out_free_priv;
+	}
+
+	for (i = 0; i < HTINTC_NUM_HANDLER; i++) {
+		parent_irq[i] = irq_of_parse_and_map(node, i);
+		if (!parent_irq[i]) {
+			pr_err("ls3-htintc: unable to get parent irq %d\n", i);
+			err =  -ENODEV;
+			goto out_iounmap;
+		}
+	}
+	/* Set up an IRQ domain */
+	domain = irq_domain_add_linear(node, 32 * HTINTC_NUM_GC,
+								&irq_generic_chip_ops, NULL);
+	if (!domain) {
+		pr_err("ls3-htintc: cannot add IRQ domain\n");
+		err = -ENOMEM;
+		goto out_iounmap;
+	}
+
+	for (i = 0; i < HTINTC_NUM_HANDLER; i++) {
+		/* Mask all interrupts */
+		writeq(0x0, base + HTINTC_EN_OFFSET + HTINTC_HANDLER_SIZE * i);
+	}
+
+	err = irq_alloc_domain_generic_chips(domain, 32, 1,
+										node->full_name,
+										handle_edge_irq,
+										IRQ_NOPROBE, 0,
+										IRQ_GC_INIT_MASK_CACHE);
+	if (err) {
+		pr_err("ls3-htintc: unable to register IRQ domain\n");
+		err = -ENOMEM;
+		goto out_free_domain;
+	}
+
+	for (i = 0; i < HTINTC_NUM_GC; i++) {
+		gc = irq_get_domain_generic_chip(domain, i * 32);
+		gc->reg_base = base + HTINTC_GC_SIZE * i;
+		gc->domain = domain;
+
+		ct = gc->chip_types;
+		ct->regs.mask = HTINTC_EN_OFFSET;
+		ct->regs.ack = HTINTC_VECTOR_OFFSET;
+		ct->chip.irq_unmask = irq_gc_mask_set_bit;
+		ct->chip.irq_mask = irq_gc_mask_clr_bit;
+		ct->chip.irq_ack = irq_gc_ack_set_bit;
+	}
+
+	priv->domain = domain;
+	priv->handler_base = base + HTINTC_VECTOR_OFFSET;
+
+	for (i = 0; i < HTINTC_NUM_HANDLER; i++) {
+		irq_set_chained_handler_and_data(parent_irq[i],
+										htintc_chained_handle_irq,
+										priv);
+	}
+
+	return 0;
+
+out_free_domain:
+	irq_domain_remove(domain);
+out_iounmap:
+	iounmap(base);
+out_free_priv:
+	kfree(priv);
+
+	return err;
+}
+
+IRQCHIP_DECLARE(ls3_htintc, "loongson,ls3-htintc", ls3_htintc_of_init);
-- 
2.22.0


  reply index

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-30  4:32 [PATCH v1 06/18] dt-bindings: interrupt-controller: Add Loongson-3 IOINTC Jiaxun Yang
2019-08-30  4:32 ` Jiaxun Yang [this message]
2019-08-30  4:32 ` [PATCH v1 08/18] dt-bindings: interrupt-controller: Add Loongson-3 HTINTC Jiaxun Yang
2019-09-02 13:39   ` Rob Herring
2019-08-30  4:32 ` [PATCH v1 09/18] irqchip: i8259: Add plat-poll support Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 10/18] irqchip: mips-cpu: Convert to simple domain Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 11/18] MIPS: Loongson64: Drop legacy IRQ code Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 12/18] dt-bindings: mips: Add loongson cpus & boards Jiaxun Yang
2019-09-13 14:36   ` Rob Herring
2019-08-30  4:32 ` [PATCH v1 13/18] dt-bindings: Document loongson vendor-prefix Jiaxun Yang
2019-09-02 13:39   ` Rob Herring
2019-08-30  4:32 ` [PATCH v1 14/18] MIPS: Loongson64: Add generic dts Jiaxun Yang
     [not found]   ` <tencent_1942EDDF41E4786E357A4E9D@qq.com>
2019-09-04  6:08     ` Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 15/18] MIPS: Loongson64: Load built-in dtbs Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 16/18] MIPS: Loongson: Regenerate defconfigs Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 17/18] MAINTAINERS: Add new pathes to LOONGSON64 ARCHITECTURE Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 18/18] MAINTAINERS: Add myself as maintainer of LOONGSON64 Jiaxun Yang
2019-09-02 13:38 ` [PATCH v1 06/18] dt-bindings: interrupt-controller: Add Loongson-3 IOINTC Rob Herring

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190830043232.20191-2-jiaxun.yang@flygoat.com \
    --to=jiaxun.yang@flygoat.com \
    --cc=chenhc@lemote.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mark.rutland@arm.co \
    --cc=maz@kernel.org \
    --cc=paul.burton@mips.com \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-MIPS Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mips/0 linux-mips/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mips linux-mips/ https://lore.kernel.org/linux-mips \
		linux-mips@vger.kernel.org
	public-inbox-index linux-mips

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-mips


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git