From: Paul Burton <paul.burton@mips.com>
To: "linux-mips@vger.kernel.org" <linux-mips@vger.kernel.org>
Cc: Paul Burton <pburton@wavecomp.com>
Subject: [PATCH 1/3] MIPS: Select R3k-style TLB in Kconfig
Date: Sat, 31 Aug 2019 15:40:43 +0000 [thread overview]
Message-ID: <20190831154027.6943-1-paul.burton@mips.com> (raw)
Currently areas where we need to determine whether the TLB is R3k-style
need to check for either of CONFIG_CPU_R3000 || CONFIG_CPU_TX39XX.
Introduce a new CONFIG_CPU_R3K_TLB & select it from both of the above,
allowing us to simplify checks for R3k-style TLBs by only checking for
this new Kconfig option.
Signed-off-by: Paul Burton <paul.burton@mips.com>
---
arch/mips/Kconfig | 7 ++++++-
arch/mips/include/asm/pgtable-32.h | 4 ++--
arch/mips/include/asm/pgtable-bits.h | 6 +++---
arch/mips/include/asm/pgtable.h | 4 ++--
arch/mips/mm/Makefile | 5 +++--
5 files changed, 16 insertions(+), 10 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 31c7044e34e6..3f18aa018a0c 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1575,6 +1575,7 @@ config CPU_R3000
depends on SYS_HAS_CPU_R3000
select CPU_HAS_WB
select CPU_HAS_LOAD_STORE_LR
+ select CPU_R3K_TLB
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
help
@@ -1590,6 +1591,7 @@ config CPU_TX39XX
depends on SYS_HAS_CPU_TX39XX
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_HAS_LOAD_STORE_LR
+ select CPU_R3K_TLB
config CPU_VR41XX
bool "R41xx"
@@ -2280,6 +2282,9 @@ config CPU_R2300_FPU
depends on MIPS_FP_SUPPORT
default y if CPU_R3000 || CPU_TX39XX
+config CPU_R3K_TLB
+ bool
+
config CPU_R4K_FPU
bool
depends on MIPS_FP_SUPPORT
@@ -2287,7 +2292,7 @@ config CPU_R4K_FPU
config CPU_R4K_CACHE_TLB
bool
- default y if !(CPU_R3000 || CPU_SB1 || CPU_TX39XX || CPU_CAVIUM_OCTEON)
+ default y if !(CPU_R3K_TLB || CPU_SB1 || CPU_CAVIUM_OCTEON)
config MIPS_MT_SMP
bool "MIPS MT SMP support (1 TC on each available VPE)"
diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h
index e600570789f4..ba967148b016 100644
--- a/arch/mips/include/asm/pgtable-32.h
+++ b/arch/mips/include/asm/pgtable-32.h
@@ -221,7 +221,7 @@ static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
#define pte_unmap(pte) ((void)(pte))
-#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+#if defined(CONFIG_CPU_R3K_TLB)
/* Swap entries must have VALID bit cleared. */
#define __swp_type(x) (((x).val >> 10) & 0x1f)
@@ -266,6 +266,6 @@ static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
#endif /* defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32) */
-#endif /* defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) */
+#endif /* defined(CONFIG_CPU_R3K_TLB) */
#endif /* _ASM_PGTABLE_32_H */
diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h
index c2c1060b43ef..5f1ced8cba07 100644
--- a/arch/mips/include/asm/pgtable-bits.h
+++ b/arch/mips/include/asm/pgtable-bits.h
@@ -82,7 +82,7 @@ enum pgtable_bits {
_PAGE_SPECIAL_SHIFT,
};
-#elif defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+#elif defined(CONFIG_CPU_R3K_TLB)
/* Page table bits used for r3k systems */
enum pgtable_bits {
@@ -151,7 +151,7 @@ enum pgtable_bits {
#define _PAGE_GLOBAL (1 << _PAGE_GLOBAL_SHIFT)
#define _PAGE_VALID (1 << _PAGE_VALID_SHIFT)
#define _PAGE_DIRTY (1 << _PAGE_DIRTY_SHIFT)
-#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+#if defined(CONFIG_CPU_R3K_TLB)
# define _CACHE_UNCACHED (1 << _CACHE_UNCACHED_SHIFT)
# define _CACHE_MASK _CACHE_UNCACHED
# define _PFN_SHIFT PAGE_SHIFT
@@ -209,7 +209,7 @@ static inline uint64_t pte_to_entrylo(unsigned long pte_val)
/*
* Cache attributes
*/
-#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+#if defined(CONFIG_CPU_R3K_TLB)
#define _CACHE_CACHABLE_NONCOHERENT 0
#define _CACHE_UNCACHED_ACCELERATED _CACHE_UNCACHED
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index d60f47a9088c..4dca733d5076 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -199,7 +199,7 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *pt
static inline void set_pte(pte_t *ptep, pte_t pteval)
{
*ptep = pteval;
-#if !defined(CONFIG_CPU_R3000) && !defined(CONFIG_CPU_TX39XX)
+#if !defined(CONFIG_CPU_R3K_TLB)
if (pte_val(pteval) & _PAGE_GLOBAL) {
pte_t *buddy = ptep_buddy(ptep);
/*
@@ -218,7 +218,7 @@ static inline void set_pte(pte_t *ptep, pte_t pteval)
static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
htw_stop();
-#if !defined(CONFIG_CPU_R3000) && !defined(CONFIG_CPU_TX39XX)
+#if !defined(CONFIG_CPU_R3K_TLB)
/* Preserve global status for the pair */
if (pte_val(*ptep_buddy(ptep)) & _PAGE_GLOBAL)
set_pte_at(mm, addr, ptep, __pte(_PAGE_GLOBAL));
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 949d43eefda1..46f483e952c8 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -28,10 +28,11 @@ obj-$(CONFIG_HIGHMEM) += highmem.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_DMA_NONCOHERENT) += dma-noncoherent.o
+obj-$(CONFIG_CPU_R3K_TLB) += tlb-r3k.o
obj-$(CONFIG_CPU_R4K_CACHE_TLB) += c-r4k.o cex-gen.o tlb-r4k.o
-obj-$(CONFIG_CPU_R3000) += c-r3k.o tlb-r3k.o
+obj-$(CONFIG_CPU_R3000) += c-r3k.o
obj-$(CONFIG_CPU_SB1) += c-r4k.o cerr-sb1.o cex-sb1.o tlb-r4k.o
-obj-$(CONFIG_CPU_TX39XX) += c-tx39.o tlb-r3k.o
+obj-$(CONFIG_CPU_TX39XX) += c-tx39.o
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += c-octeon.o cex-oct.o tlb-r4k.o
obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o
--
2.22.1
next reply other threads:[~2019-08-31 15:40 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-31 15:40 Paul Burton [this message]
2019-08-31 15:40 ` [PATCH 2/3] MIPS: tlbex: Simplify r3k check Paul Burton
2019-08-31 15:40 ` [PATCH 3/3] MIPS: tlbex: Remove cpu_has_local_ebase Paul Burton
2019-09-01 23:19 ` Philippe Mathieu-Daudé
2019-09-30 4:29 ` Maciej W. Rozycki
2019-09-01 22:54 ` [PATCH 1/3] MIPS: Select R3k-style TLB in Kconfig Philippe Mathieu-Daudé
2019-09-03 14:45 ` Paul Burton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190831154027.6943-1-paul.burton@mips.com \
--to=paul.burton@mips.com \
--cc=linux-mips@vger.kernel.org \
--cc=pburton@wavecomp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).