Linux-MIPS Archive on
 help / color / Atom feed
From: Florian Fainelli <>
Cc: Florian Fainelli <>,
	Thomas Gleixner <>,
	Jason Cooper <>,
	Marc Zyngier <>, Rob Herring <>,
	Mark Rutland <>,
	Kevin Cernekee <>, (open list:OPEN FIRMWARE AND
Subject: [PATCH 4/6] dt-bindings: Document brcm,int-fwd-mask property for bcm7038-l1-intc
Date: Fri, 13 Sep 2019 12:10:24 -0700
Message-ID: <> (raw)
In-Reply-To: <>

Indicate that the brcm,int-fwd-mask property is optional and can be
optionaly set on platforms which require to leave specific interrupts
untouched from Linux and retain the firmware configuration.

Signed-off-by: Florian Fainelli <>
 .../bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt    | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
index 4eb043270f5b..31d31af408c5 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
@@ -36,6 +36,10 @@ Optional properties:
 - brcm,irq-can-wake: If present, this means the L1 controller can be used as a
   wakeup source for system suspend/resume.
+- brcm,int-fwd-mask: if present, a bit mask to indicate which interrupts
+  have already been configured by the firmware and should be left untouched.
+  This should have one 32-bit word per status/set/clear/mask group.
 If multiple reg ranges and interrupt-parent entries are present on an SMP
 system, the driver will allow IRQ SMP affinity to be set up through the
 /proc/irq/ interface.  In the simplest possible configuration, only one

  parent reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-13 19:10 [PATCH 0/6] irqchip/irq-bcm7038-l1 updates Florian Fainelli
2019-09-13 19:10 ` [PATCH 1/6] irqchip/irq-bcm7038-l1: Add PM support Florian Fainelli
2019-09-13 19:10 ` [PATCH 2/6] dt-bindings: Document brcm,irq-can-wake for brcm,bcm7038-l1-intc.txt Florian Fainelli
2019-09-13 19:10 ` [PATCH 3/6] irqchip/irq-bcm7038-l1: Enable parent IRQ if necessary Florian Fainelli
2019-09-13 19:10 ` Florian Fainelli [this message]
2019-09-13 19:10 ` [PATCH 5/6] irqchip/irq-bcm7038-l1: Support brcm,int-fwd-mask Florian Fainelli
2019-09-13 19:10 ` [PATCH 6/6] fixup! irqchip/irq-bcm7038-l1: Add PM support Florian Fainelli
2019-09-13 19:13   ` Florian Fainelli

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-MIPS Archive on

Archives are clonable:
	git clone --mirror linux-mips/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mips linux-mips/ \
	public-inbox-index linux-mips

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox