linux-mips.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Florian Fainelli <f.fainelli@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Justin Chen <justinpopo6@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Jason Cooper <jason@lakedaemon.net>,
	Marc Zyngier <maz@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Kevin Cernekee <cernekee@gmail.com>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	bcm-kernel-feedback-list@broadcom.com (open list:BROADCOM BMIPS
	MIPS ARCHITECTURE),
	linux-mips@vger.kernel.org (open list:BROADCOM BMIPS MIPS
	ARCHITECTURE)
Subject: [PATCH v2 1/5] irqchip/irq-bcm7038-l1: Add PM support
Date: Fri, 13 Sep 2019 12:15:38 -0700	[thread overview]
Message-ID: <20190913191542.9908-2-f.fainelli@gmail.com> (raw)
In-Reply-To: <20190913191542.9908-1-f.fainelli@gmail.com>

From: Justin Chen <justinpopo6@gmail.com>

The current l1 controller does not mask any interrupts when dropping
into suspend. This mean we can receive unexpected wake up sources.
Modified MIPS l1 controller to mask the all non-wake interrupts before
dropping into suspend.

Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/irq-bcm7038-l1.c | 98 ++++++++++++++++++++++++++++++++
 1 file changed, 98 insertions(+)

diff --git a/drivers/irqchip/irq-bcm7038-l1.c b/drivers/irqchip/irq-bcm7038-l1.c
index fc75c61233aa..f5e4ff5251ab 100644
--- a/drivers/irqchip/irq-bcm7038-l1.c
+++ b/drivers/irqchip/irq-bcm7038-l1.c
@@ -27,6 +27,7 @@
 #include <linux/types.h>
 #include <linux/irqchip.h>
 #include <linux/irqchip/chained_irq.h>
+#include <linux/syscore_ops.h>
 
 #define IRQS_PER_WORD		32
 #define REG_BYTES_PER_IRQ_WORD	(sizeof(u32) * 4)
@@ -39,6 +40,10 @@ struct bcm7038_l1_chip {
 	unsigned int		n_words;
 	struct irq_domain	*domain;
 	struct bcm7038_l1_cpu	*cpus[NR_CPUS];
+#ifdef CONFIG_PM_SLEEP
+	struct list_head	list;
+	u32			wake_mask[MAX_WORDS];
+#endif
 	u8			affinity[MAX_WORDS * IRQS_PER_WORD];
 };
 
@@ -47,6 +52,17 @@ struct bcm7038_l1_cpu {
 	u32			mask_cache[0];
 };
 
+/*
+ * We keep a list of bcm7038_l1_chip used for suspend/resume. This hack is
+ * used because the struct chip_type suspend/resume hooks are not called
+ * unless chip_type is hooked onto a generic_chip. Since this driver does
+ * not use generic_chip, we need to manually hook our resume/suspend to
+ * syscore_ops.
+ */
+#ifdef CONFIG_PM_SLEEP
+static LIST_HEAD(bcm7038_l1_intcs_list);
+#endif
+
 /*
  * STATUS/MASK_STATUS/MASK_SET/MASK_CLEAR are packed one right after another:
  *
@@ -287,6 +303,77 @@ static int __init bcm7038_l1_init_one(struct device_node *dn,
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int bcm7038_l1_suspend(void)
+{
+	struct bcm7038_l1_chip *intc;
+	unsigned long flags;
+	int boot_cpu, word;
+
+	/* Wakeup interrupt should only come from the boot cpu */
+	boot_cpu = cpu_logical_map(smp_processor_id());
+
+	list_for_each_entry(intc, &bcm7038_l1_intcs_list, list) {
+		raw_spin_lock_irqsave(&intc->lock, flags);
+		for (word = 0; word < intc->n_words; word++) {
+			l1_writel(~intc->wake_mask[word],
+				intc->cpus[boot_cpu]->map_base +
+				reg_mask_set(intc, word));
+			l1_writel(intc->wake_mask[word],
+				intc->cpus[boot_cpu]->map_base +
+				reg_mask_clr(intc, word));
+		}
+		raw_spin_unlock_irqrestore(&intc->lock, flags);
+	}
+
+	return 0;
+}
+
+static void bcm7038_l1_resume(void)
+{
+	struct bcm7038_l1_chip *intc;
+	unsigned long flags;
+	int boot_cpu, word;
+
+	boot_cpu = cpu_logical_map(smp_processor_id());
+
+	list_for_each_entry(intc, &bcm7038_l1_intcs_list, list) {
+		raw_spin_lock_irqsave(&intc->lock, flags);
+		for (word = 0; word < intc->n_words; word++) {
+			l1_writel(intc->cpus[boot_cpu]->mask_cache[word],
+				intc->cpus[boot_cpu]->map_base +
+				reg_mask_set(intc, word));
+			l1_writel(~intc->cpus[boot_cpu]->mask_cache[word],
+				intc->cpus[boot_cpu]->map_base +
+				reg_mask_clr(intc, word));
+		}
+		raw_spin_unlock_irqrestore(&intc->lock, flags);
+	}
+}
+
+static struct syscore_ops bcm7038_l1_syscore_ops = {
+	.suspend	= bcm7038_l1_suspend,
+	.resume		= bcm7038_l1_resume,
+};
+
+static int bcm7038_l1_set_wake(struct irq_data *d, unsigned int on)
+{
+	struct bcm7038_l1_chip *intc = irq_data_get_irq_chip_data(d);
+	unsigned long flags;
+	u32 word = d->hwirq / IRQS_PER_WORD;
+	u32 mask = BIT(d->hwirq % IRQS_PER_WORD);
+
+	raw_spin_lock_irqsave(&intc->lock, flags);
+	if (on)
+		intc->wake_mask[word] |= mask;
+	else
+		intc->wake_mask[word] &= ~mask;
+	raw_spin_unlock_irqrestore(&intc->lock, flags);
+
+	return 0;
+}
+#endif
+
 static struct irq_chip bcm7038_l1_irq_chip = {
 	.name			= "bcm7038-l1",
 	.irq_mask		= bcm7038_l1_mask,
@@ -295,6 +382,9 @@ static struct irq_chip bcm7038_l1_irq_chip = {
 #ifdef CONFIG_SMP
 	.irq_cpu_offline	= bcm7038_l1_cpu_offline,
 #endif
+#ifdef CONFIG_PM_SLEEP
+	.irq_set_wake		= bcm7038_l1_set_wake,
+#endif
 };
 
 static int bcm7038_l1_map(struct irq_domain *d, unsigned int virq,
@@ -340,6 +430,14 @@ int __init bcm7038_l1_of_init(struct device_node *dn,
 		goto out_unmap;
 	}
 
+#ifdef CONFIG_PM_SLEEP
+	/* Add bcm7038_l1_chip into a list */
+	INIT_LIST_HEAD(&intc->list);
+	list_add_tail(&intc->list, &bcm7038_l1_intcs_list);
+
+	register_syscore_ops(&bcm7038_l1_syscore_ops);
+#endif
+
 	pr_info("registered BCM7038 L1 intc (%pOF, IRQs: %d)\n",
 		dn, IRQS_PER_WORD * intc->n_words);
 
-- 
2.17.1


  reply	other threads:[~2019-09-13 19:16 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-13 19:15 [PATCH v2 0/5] irqchip/irq-bcm7038-l1 updates Florian Fainelli
2019-09-13 19:15 ` Florian Fainelli [this message]
2019-09-22 12:31   ` [PATCH v2 1/5] irqchip/irq-bcm7038-l1: Add PM support Marc Zyngier
2019-09-22 18:50     ` Florian Fainelli
2019-09-13 19:15 ` [PATCH v2 2/5] dt-bindings: Document brcm,irq-can-wake for brcm,bcm7038-l1-intc.txt Florian Fainelli
2019-09-30 19:05   ` Rob Herring
2019-09-13 19:15 ` [PATCH v2 3/5] irqchip/irq-bcm7038-l1: Enable parent IRQ if necessary Florian Fainelli
2019-09-13 19:15 ` [PATCH v2 4/5] dt-bindings: Document brcm,int-fwd-mask property for bcm7038-l1-intc Florian Fainelli
2019-09-30 19:10   ` Rob Herring
2019-09-13 19:15 ` [PATCH v2 5/5] irqchip/irq-bcm7038-l1: Support brcm,int-fwd-mask Florian Fainelli
2019-09-22 12:38   ` Marc Zyngier
2019-09-22 19:08     ` Florian Fainelli
2019-09-23  8:52       ` Marc Zyngier
2019-09-23 14:39         ` Florian Fainelli
2019-09-23 14:57           ` Marc Zyngier
2019-09-23 15:08             ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190913191542.9908-2-f.fainelli@gmail.com \
    --to=f.fainelli@gmail.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=cernekee@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=justinpopo6@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maz@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).