linux-mips.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Florian Fainelli <f.fainelli@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Jason Cooper <jason@lakedaemon.net>,
	Marc Zyngier <maz@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Kevin Cernekee <cernekee@gmail.com>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	bcm-kernel-feedback-list@broadcom.com (open list:BROADCOM BMIPS
	MIPS ARCHITECTURE),
	linux-mips@vger.kernel.org (open list:BROADCOM BMIPS MIPS
	ARCHITECTURE)
Subject: [PATCH v2 5/5] irqchip/irq-bcm7038-l1: Support brcm,int-fwd-mask
Date: Fri, 13 Sep 2019 12:15:42 -0700	[thread overview]
Message-ID: <20190913191542.9908-6-f.fainelli@gmail.com> (raw)
In-Reply-To: <20190913191542.9908-1-f.fainelli@gmail.com>

On some specific chips like 7211 we need to leave some interrupts
untouched/forwarded to the VPU which is another agent in the system
making use of that interrupt controller hardware (goes to both ARM GIC
and VPU L1 interrupt controller). Make that possible by using the
existing brcm,int-fwd-mask property.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/irqchip/irq-bcm7038-l1.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-bcm7038-l1.c b/drivers/irqchip/irq-bcm7038-l1.c
index 0673a44bbdc2..811a34201dd4 100644
--- a/drivers/irqchip/irq-bcm7038-l1.c
+++ b/drivers/irqchip/irq-bcm7038-l1.c
@@ -44,6 +44,7 @@ struct bcm7038_l1_chip {
 	struct list_head	list;
 	u32			wake_mask[MAX_WORDS];
 #endif
+	u32			irq_fwd_mask[MAX_WORDS];
 	u8			affinity[MAX_WORDS * IRQS_PER_WORD];
 };
 
@@ -265,6 +266,7 @@ static int __init bcm7038_l1_init_one(struct device_node *dn,
 	resource_size_t sz;
 	struct bcm7038_l1_cpu *cpu;
 	unsigned int i, n_words, parent_irq;
+	int ret;
 
 	if (of_address_to_resource(dn, idx, &res))
 		return -EINVAL;
@@ -278,6 +280,14 @@ static int __init bcm7038_l1_init_one(struct device_node *dn,
 	else if (intc->n_words != n_words)
 		return -EINVAL;
 
+	ret = of_property_read_u32_array(dn , "brcm,int-fwd-mask",
+					 intc->irq_fwd_mask, n_words);
+	if (ret != 0 && ret != -EINVAL) {
+		/* property exists but has the wrong number of words */
+		pr_err("invalid brcm,int-fwd-mask property\n");
+		return -EINVAL;
+	}
+
 	cpu = intc->cpus[idx] = kzalloc(sizeof(*cpu) + n_words * sizeof(u32),
 					GFP_KERNEL);
 	if (!cpu)
@@ -288,8 +298,9 @@ static int __init bcm7038_l1_init_one(struct device_node *dn,
 		return -ENOMEM;
 
 	for (i = 0; i < n_words; i++) {
-		l1_writel(0xffffffff, cpu->map_base + reg_mask_set(intc, i));
-		cpu->mask_cache[i] = 0xffffffff;
+		l1_writel(0xffffffff & ~intc->irq_fwd_mask[i],
+			  cpu->map_base + reg_mask_set(intc, i));
+		cpu->mask_cache[i] = 0xffffffff & ~intc->irq_fwd_mask[i];
 	}
 
 	parent_irq = irq_of_parse_and_map(dn, idx);
-- 
2.17.1


  parent reply	other threads:[~2019-09-13 19:16 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-13 19:15 [PATCH v2 0/5] irqchip/irq-bcm7038-l1 updates Florian Fainelli
2019-09-13 19:15 ` [PATCH v2 1/5] irqchip/irq-bcm7038-l1: Add PM support Florian Fainelli
2019-09-22 12:31   ` Marc Zyngier
2019-09-22 18:50     ` Florian Fainelli
2019-09-13 19:15 ` [PATCH v2 2/5] dt-bindings: Document brcm,irq-can-wake for brcm,bcm7038-l1-intc.txt Florian Fainelli
2019-09-30 19:05   ` Rob Herring
2019-09-13 19:15 ` [PATCH v2 3/5] irqchip/irq-bcm7038-l1: Enable parent IRQ if necessary Florian Fainelli
2019-09-13 19:15 ` [PATCH v2 4/5] dt-bindings: Document brcm,int-fwd-mask property for bcm7038-l1-intc Florian Fainelli
2019-09-30 19:10   ` Rob Herring
2019-09-13 19:15 ` Florian Fainelli [this message]
2019-09-22 12:38   ` [PATCH v2 5/5] irqchip/irq-bcm7038-l1: Support brcm,int-fwd-mask Marc Zyngier
2019-09-22 19:08     ` Florian Fainelli
2019-09-23  8:52       ` Marc Zyngier
2019-09-23 14:39         ` Florian Fainelli
2019-09-23 14:57           ` Marc Zyngier
2019-09-23 15:08             ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190913191542.9908-6-f.fainelli@gmail.com \
    --to=f.fainelli@gmail.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=cernekee@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maz@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).