Linux-MIPS Archive on lore.kernel.org
 help / color / Atom feed
* ioc3_eth DMA API fixes
@ 2019-10-30 21:12 Christoph Hellwig
  2019-10-30 21:12 ` [PATCH 1/4] net: sgi: ioc3-eth: don't abuse dma_direct_* calls Christoph Hellwig
                   ` (4 more replies)
  0 siblings, 5 replies; 14+ messages in thread
From: Christoph Hellwig @ 2019-10-30 21:12 UTC (permalink / raw)
  To: David S. Miller, Thomas Bogendoerfer; +Cc: linux-mips, netdev, linux-kernel

Hi Dave and Thomas,

please take a look at this series which fixes DMA API usage in the ioc3
ethernet driver.  At least the first one is a nasty abuse of internal
APIs introduced in 5.4-rc which I'd prefer to be fixed before 5.4 final.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH 1/4] net: sgi: ioc3-eth: don't abuse dma_direct_* calls
  2019-10-30 21:12 ioc3_eth DMA API fixes Christoph Hellwig
@ 2019-10-30 21:12 ` Christoph Hellwig
  2019-10-30 22:05   ` Thomas Bogendoerfer
  2019-10-30 21:12 ` [PATCH 2/4] net: sgi: ioc3-eth: fix usage of GFP_* flags Christoph Hellwig
                   ` (3 subsequent siblings)
  4 siblings, 1 reply; 14+ messages in thread
From: Christoph Hellwig @ 2019-10-30 21:12 UTC (permalink / raw)
  To: David S. Miller, Thomas Bogendoerfer; +Cc: linux-mips, netdev, linux-kernel

dma_direct_ is a low-level API that must never be used by drivers
directly.  Switch to use the proper DMA API instead.

Fixes: ed870f6a7aa2 ("net: sgi: ioc3-eth: use dma-direct for dma allocations")
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/net/ethernet/sgi/ioc3-eth.c | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/sgi/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c
index deb636d653f3..477af82bf8a9 100644
--- a/drivers/net/ethernet/sgi/ioc3-eth.c
+++ b/drivers/net/ethernet/sgi/ioc3-eth.c
@@ -48,7 +48,7 @@
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/skbuff.h>
-#include <linux/dma-direct.h>
+#include <linux/dma-mapping.h>
 
 #include <net/ip.h>
 
@@ -1242,8 +1242,8 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	ioc3_stop(ip);
 
 	/* Allocate rx ring.  4kb = 512 entries, must be 4kb aligned */
-	ip->rxr = dma_direct_alloc_pages(ip->dma_dev, RX_RING_SIZE,
-					 &ip->rxr_dma, GFP_ATOMIC, 0);
+	ip->rxr = dma_alloc_coherent(ip->dma_dev, RX_RING_SIZE, &ip->rxr_dma,
+				     GFP_ATOMIC);
 	if (!ip->rxr) {
 		pr_err("ioc3-eth: rx ring allocation failed\n");
 		err = -ENOMEM;
@@ -1251,9 +1251,8 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	/* Allocate tx rings.  16kb = 128 bufs, must be 16kb aligned  */
-	ip->txr = dma_direct_alloc_pages(ip->dma_dev, TX_RING_SIZE,
-					 &ip->txr_dma,
-					 GFP_KERNEL | __GFP_ZERO, 0);
+	ip->txr = dma_alloc_coherent(ip->dma_dev, TX_RING_SIZE, &ip->txr_dma,
+				     GFP_KERNEL | __GFP_ZERO);
 	if (!ip->txr) {
 		pr_err("ioc3-eth: tx ring allocation failed\n");
 		err = -ENOMEM;
@@ -1313,11 +1312,11 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 out_stop:
 	del_timer_sync(&ip->ioc3_timer);
 	if (ip->rxr)
-		dma_direct_free_pages(ip->dma_dev, RX_RING_SIZE, ip->rxr,
-				      ip->rxr_dma, 0);
+		dma_free_coherent(ip->dma_dev, RX_RING_SIZE, ip->rxr,
+				  ip->rxr_dma);
 	if (ip->txr)
-		dma_direct_free_pages(ip->dma_dev, TX_RING_SIZE, ip->txr,
-				      ip->txr_dma, 0);
+		dma_free_coherent(ip->dma_dev, TX_RING_SIZE, ip->txr,
+				  ip->txr_dma);
 out_res:
 	pci_release_regions(pdev);
 out_free:
@@ -1335,10 +1334,8 @@ static void ioc3_remove_one(struct pci_dev *pdev)
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct ioc3_private *ip = netdev_priv(dev);
 
-	dma_direct_free_pages(ip->dma_dev, RX_RING_SIZE, ip->rxr,
-			      ip->rxr_dma, 0);
-	dma_direct_free_pages(ip->dma_dev, TX_RING_SIZE, ip->txr,
-			      ip->txr_dma, 0);
+	dma_free_coherent(ip->dma_dev, RX_RING_SIZE, ip->rxr, ip->rxr_dma);
+	dma_free_coherent(ip->dma_dev, TX_RING_SIZE, ip->txr, ip->txr_dma);
 
 	unregister_netdev(dev);
 	del_timer_sync(&ip->ioc3_timer);
-- 
2.20.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH 2/4] net: sgi: ioc3-eth: fix usage of GFP_* flags
  2019-10-30 21:12 ioc3_eth DMA API fixes Christoph Hellwig
  2019-10-30 21:12 ` [PATCH 1/4] net: sgi: ioc3-eth: don't abuse dma_direct_* calls Christoph Hellwig
@ 2019-10-30 21:12 ` Christoph Hellwig
  2019-10-30 21:12 ` [PATCH 3/4] net: sgi: ioc3-eth: simplify setting the DMA mask Christoph Hellwig
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 14+ messages in thread
From: Christoph Hellwig @ 2019-10-30 21:12 UTC (permalink / raw)
  To: David S. Miller, Thomas Bogendoerfer; +Cc: linux-mips, netdev, linux-kernel

dma_alloc_coherent always zeroes memory, there is no need for
__GFP_ZERO.  Also doing a GFP_ATOMIC allocation just before a GFP_KERNEL
one is clearly bogus.

Fixes: ed870f6a7aa2 ("net: sgi: ioc3-eth: use dma-direct for dma allocations")
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/net/ethernet/sgi/ioc3-eth.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/sgi/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c
index 477af82bf8a9..8a684d882e63 100644
--- a/drivers/net/ethernet/sgi/ioc3-eth.c
+++ b/drivers/net/ethernet/sgi/ioc3-eth.c
@@ -1243,7 +1243,7 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* Allocate rx ring.  4kb = 512 entries, must be 4kb aligned */
 	ip->rxr = dma_alloc_coherent(ip->dma_dev, RX_RING_SIZE, &ip->rxr_dma,
-				     GFP_ATOMIC);
+				     GFP_KERNEL);
 	if (!ip->rxr) {
 		pr_err("ioc3-eth: rx ring allocation failed\n");
 		err = -ENOMEM;
@@ -1252,7 +1252,7 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* Allocate tx rings.  16kb = 128 bufs, must be 16kb aligned  */
 	ip->txr = dma_alloc_coherent(ip->dma_dev, TX_RING_SIZE, &ip->txr_dma,
-				     GFP_KERNEL | __GFP_ZERO);
+				     GFP_KERNEL);
 	if (!ip->txr) {
 		pr_err("ioc3-eth: tx ring allocation failed\n");
 		err = -ENOMEM;
-- 
2.20.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH 3/4] net: sgi: ioc3-eth: simplify setting the DMA mask
  2019-10-30 21:12 ioc3_eth DMA API fixes Christoph Hellwig
  2019-10-30 21:12 ` [PATCH 1/4] net: sgi: ioc3-eth: don't abuse dma_direct_* calls Christoph Hellwig
  2019-10-30 21:12 ` [PATCH 2/4] net: sgi: ioc3-eth: fix usage of GFP_* flags Christoph Hellwig
@ 2019-10-30 21:12 ` Christoph Hellwig
  2019-10-30 21:12 ` [PATCH 4/4] net: sgi: ioc3-eth: fix setting NETIF_F_HIGHDMA Christoph Hellwig
  2019-10-31 21:13 ` ioc3_eth DMA API fixes David Miller
  4 siblings, 0 replies; 14+ messages in thread
From: Christoph Hellwig @ 2019-10-30 21:12 UTC (permalink / raw)
  To: David S. Miller, Thomas Bogendoerfer; +Cc: linux-mips, netdev, linux-kernel

There is no need to fall back to a lower mask these days, the DMA mask
just communictes the hardware supported features.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/net/ethernet/sgi/ioc3-eth.c | 27 +++++++--------------------
 1 file changed, 7 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/sgi/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c
index 8a684d882e63..dc2e22652b55 100644
--- a/drivers/net/ethernet/sgi/ioc3-eth.c
+++ b/drivers/net/ethernet/sgi/ioc3-eth.c
@@ -1173,26 +1173,14 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct ioc3 *ioc3;
 	unsigned long ioc3_base, ioc3_size;
 	u32 vendor, model, rev;
-	int err, pci_using_dac;
+	int err;
 
 	/* Configure DMA attributes. */
-	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
-	if (!err) {
-		pci_using_dac = 1;
-		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
-		if (err < 0) {
-			pr_err("%s: Unable to obtain 64 bit DMA for consistent allocations\n",
-			       pci_name(pdev));
-			goto out;
-		}
-	} else {
-		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-		if (err) {
-			pr_err("%s: No usable DMA configuration, aborting.\n",
-			       pci_name(pdev));
-			goto out;
-		}
-		pci_using_dac = 0;
+	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+	if (err) {
+		pr_err("%s: No usable DMA configuration, aborting.\n",
+		       pci_name(pdev));
+		goto out;
 	}
 
 	if (pci_enable_device(pdev))
@@ -1204,8 +1192,7 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto out_disable;
 	}
 
-	if (pci_using_dac)
-		dev->features |= NETIF_F_HIGHDMA;
+	dev->features |= NETIF_F_HIGHDMA;
 
 	err = pci_request_regions(pdev, "ioc3");
 	if (err)
-- 
2.20.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH 4/4] net: sgi: ioc3-eth: fix setting NETIF_F_HIGHDMA
  2019-10-30 21:12 ioc3_eth DMA API fixes Christoph Hellwig
                   ` (2 preceding siblings ...)
  2019-10-30 21:12 ` [PATCH 3/4] net: sgi: ioc3-eth: simplify setting the DMA mask Christoph Hellwig
@ 2019-10-30 21:12 ` Christoph Hellwig
  2019-10-31 21:13 ` ioc3_eth DMA API fixes David Miller
  4 siblings, 0 replies; 14+ messages in thread
From: Christoph Hellwig @ 2019-10-30 21:12 UTC (permalink / raw)
  To: David S. Miller, Thomas Bogendoerfer; +Cc: linux-mips, netdev, linux-kernel

Set NETIF_F_HIGHDMA together with the NETIF_F_IP_CSUM flag insted of
letting the second assignment overwrite it.  Probably doesn't matter
in practice as none of the systems a IOC3 is usually found in has
highmem to start with.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/net/ethernet/sgi/ioc3-eth.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/sgi/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c
index dc2e22652b55..1af68826810a 100644
--- a/drivers/net/ethernet/sgi/ioc3-eth.c
+++ b/drivers/net/ethernet/sgi/ioc3-eth.c
@@ -1192,8 +1192,6 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto out_disable;
 	}
 
-	dev->features |= NETIF_F_HIGHDMA;
-
 	err = pci_request_regions(pdev, "ioc3");
 	if (err)
 		goto out_free;
@@ -1274,7 +1272,7 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	dev->netdev_ops		= &ioc3_netdev_ops;
 	dev->ethtool_ops	= &ioc3_ethtool_ops;
 	dev->hw_features	= NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
-	dev->features		= NETIF_F_IP_CSUM;
+	dev->features		= NETIF_F_IP_CSUM | NETIF_F_HIGHDMA;
 
 	sw_physid1 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID1);
 	sw_physid2 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID2);
-- 
2.20.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 1/4] net: sgi: ioc3-eth: don't abuse dma_direct_* calls
  2019-10-30 21:12 ` [PATCH 1/4] net: sgi: ioc3-eth: don't abuse dma_direct_* calls Christoph Hellwig
@ 2019-10-30 22:05   ` Thomas Bogendoerfer
  2019-10-30 22:38     ` Christoph Hellwig
  0 siblings, 1 reply; 14+ messages in thread
From: Thomas Bogendoerfer @ 2019-10-30 22:05 UTC (permalink / raw)
  To: Christoph Hellwig; +Cc: David S. Miller, linux-mips, netdev, linux-kernel

On Wed, 30 Oct 2019 14:12:30 -0700
Christoph Hellwig <hch@lst.de> wrote:

> dma_direct_ is a low-level API that must never be used by drivers
> directly.  Switch to use the proper DMA API instead.

is the 4kb/16kb alignment still guaranteed ? If not how is the way
to get such an alignment ?

Thomas.

-- 
SUSE Software Solutions Germany GmbH
HRB 36809 (AG Nürnberg)
Geschäftsführer: Felix Imendörffer

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 1/4] net: sgi: ioc3-eth: don't abuse dma_direct_* calls
  2019-10-30 22:05   ` Thomas Bogendoerfer
@ 2019-10-30 22:38     ` Christoph Hellwig
  2019-10-31  8:54       ` Thomas Bogendoerfer
  0 siblings, 1 reply; 14+ messages in thread
From: Christoph Hellwig @ 2019-10-30 22:38 UTC (permalink / raw)
  To: Thomas Bogendoerfer
  Cc: Christoph Hellwig, David S. Miller, linux-mips, netdev, linux-kernel

On Wed, Oct 30, 2019 at 11:05:49PM +0100, Thomas Bogendoerfer wrote:
> On Wed, 30 Oct 2019 14:12:30 -0700
> Christoph Hellwig <hch@lst.de> wrote:
> 
> > dma_direct_ is a low-level API that must never be used by drivers
> > directly.  Switch to use the proper DMA API instead.
> 
> is the 4kb/16kb alignment still guaranteed ? If not how is the way
> to get such an alignment ?

The DMA API gives you page aligned memory. dma_direct doesn't give you
any gurantees as it is an internal API explicitly documented as not
for driver usage that can change at any time.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 1/4] net: sgi: ioc3-eth: don't abuse dma_direct_* calls
  2019-10-30 22:38     ` Christoph Hellwig
@ 2019-10-31  8:54       ` Thomas Bogendoerfer
  2019-10-31 13:15         ` Christoph Hellwig
  0 siblings, 1 reply; 14+ messages in thread
From: Thomas Bogendoerfer @ 2019-10-31  8:54 UTC (permalink / raw)
  To: Christoph Hellwig; +Cc: David S. Miller, linux-mips, netdev, linux-kernel

On Wed, 30 Oct 2019 23:38:18 +0100
Christoph Hellwig <hch@lst.de> wrote:

> On Wed, Oct 30, 2019 at 11:05:49PM +0100, Thomas Bogendoerfer wrote:
> > On Wed, 30 Oct 2019 14:12:30 -0700
> > Christoph Hellwig <hch@lst.de> wrote:
> > 
> > > dma_direct_ is a low-level API that must never be used by drivers
> > > directly.  Switch to use the proper DMA API instead.
> > 
> > is the 4kb/16kb alignment still guaranteed ? If not how is the way
> > to get such an alignment ?
> 
> The DMA API gives you page aligned memory. dma_direct doesn't give you
> any gurantees as it is an internal API explicitly documented as not
> for driver usage that can change at any time.

I didn't want to argue about that. What I'm interested in is a way how 
to allocate dma memory, which is 16kB aligned, via the DMA API ?

Thomas.

-- 
SUSE Software Solutions Germany GmbH
HRB 36809 (AG Nürnberg)
Geschäftsführer: Felix Imendörffer

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 1/4] net: sgi: ioc3-eth: don't abuse dma_direct_* calls
  2019-10-31  8:54       ` Thomas Bogendoerfer
@ 2019-10-31 13:15         ` Christoph Hellwig
  2019-10-31 15:18           ` Thomas Bogendoerfer
  0 siblings, 1 reply; 14+ messages in thread
From: Christoph Hellwig @ 2019-10-31 13:15 UTC (permalink / raw)
  To: Thomas Bogendoerfer
  Cc: Christoph Hellwig, David S. Miller, linux-mips, netdev, linux-kernel

On Thu, Oct 31, 2019 at 09:54:30AM +0100, Thomas Bogendoerfer wrote:
> I didn't want to argue about that. What I'm interested in is a way how 
> to allocate dma memory, which is 16kB aligned, via the DMA API ?

You can't.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 1/4] net: sgi: ioc3-eth: don't abuse dma_direct_* calls
  2019-10-31 13:15         ` Christoph Hellwig
@ 2019-10-31 15:18           ` Thomas Bogendoerfer
  2019-10-31 17:01             ` Christoph Hellwig
  2019-10-31 19:15             ` David Miller
  0 siblings, 2 replies; 14+ messages in thread
From: Thomas Bogendoerfer @ 2019-10-31 15:18 UTC (permalink / raw)
  To: Christoph Hellwig; +Cc: David S. Miller, linux-mips, netdev, linux-kernel

On Thu, 31 Oct 2019 14:15:01 +0100
Christoph Hellwig <hch@lst.de> wrote:

> On Thu, Oct 31, 2019 at 09:54:30AM +0100, Thomas Bogendoerfer wrote:
> > I didn't want to argue about that. What I'm interested in is a way how 
> > to allocate dma memory, which is 16kB aligned, via the DMA API ?
> 
> You can't.

So then __get_free_pages() and dma_map_page() is the only way ?

BTW I've successful tested your patches on an 8 CPU Origin 2k.

Thomas.

-- 
SUSE Software Solutions Germany GmbH
HRB 36809 (AG Nürnberg)
Geschäftsführer: Felix Imendörffer

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 1/4] net: sgi: ioc3-eth: don't abuse dma_direct_* calls
  2019-10-31 15:18           ` Thomas Bogendoerfer
@ 2019-10-31 17:01             ` Christoph Hellwig
  2019-10-31 19:15             ` David Miller
  1 sibling, 0 replies; 14+ messages in thread
From: Christoph Hellwig @ 2019-10-31 17:01 UTC (permalink / raw)
  To: Thomas Bogendoerfer
  Cc: Christoph Hellwig, David S. Miller, linux-mips, netdev, linux-kernel

On Thu, Oct 31, 2019 at 04:18:17PM +0100, Thomas Bogendoerfer wrote:
> On Thu, 31 Oct 2019 14:15:01 +0100
> Christoph Hellwig <hch@lst.de> wrote:
> 
> > On Thu, Oct 31, 2019 at 09:54:30AM +0100, Thomas Bogendoerfer wrote:
> > > I didn't want to argue about that. What I'm interested in is a way how 
> > > to allocate dma memory, which is 16kB aligned, via the DMA API ?
> > 
> > You can't.
> 
> So then __get_free_pages() and dma_map_page() is the only way ?

Or dma_alloc_coherent + check alignment + allocate larger and align
yourself.  In practice you'll always get alignmened memory at the
moment, but there is no API gurantee.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 1/4] net: sgi: ioc3-eth: don't abuse dma_direct_* calls
  2019-10-31 15:18           ` Thomas Bogendoerfer
  2019-10-31 17:01             ` Christoph Hellwig
@ 2019-10-31 19:15             ` David Miller
  1 sibling, 0 replies; 14+ messages in thread
From: David Miller @ 2019-10-31 19:15 UTC (permalink / raw)
  To: tbogendoerfer; +Cc: hch, linux-mips, netdev, linux-kernel

From: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Date: Thu, 31 Oct 2019 16:18:17 +0100

> On Thu, 31 Oct 2019 14:15:01 +0100
> Christoph Hellwig <hch@lst.de> wrote:
> 
>> On Thu, Oct 31, 2019 at 09:54:30AM +0100, Thomas Bogendoerfer wrote:
>> > I didn't want to argue about that. What I'm interested in is a way how 
>> > to allocate dma memory, which is 16kB aligned, via the DMA API ?
>> 
>> You can't.
> 
> So then __get_free_pages() and dma_map_page() is the only way ?
> 
> BTW I've successful tested your patches on an 8 CPU Origin 2k.

Nope, it is not the only way.

Allocate a (SIZE*2)-1 sized piece of DMA memory and align the
resulting CPU pointer and DMA address as needed.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: ioc3_eth DMA API fixes
  2019-10-30 21:12 ioc3_eth DMA API fixes Christoph Hellwig
                   ` (3 preceding siblings ...)
  2019-10-30 21:12 ` [PATCH 4/4] net: sgi: ioc3-eth: fix setting NETIF_F_HIGHDMA Christoph Hellwig
@ 2019-10-31 21:13 ` David Miller
  2019-10-31 21:23   ` Christoph Hellwig
  4 siblings, 1 reply; 14+ messages in thread
From: David Miller @ 2019-10-31 21:13 UTC (permalink / raw)
  To: hch; +Cc: tbogendoerfer, linux-mips, netdev, linux-kernel

From: Christoph Hellwig <hch@lst.de>
Date: Wed, 30 Oct 2019 14:12:29 -0700

> Hi Dave and Thomas,
> 
> please take a look at this series which fixes DMA API usage in the ioc3
> ethernet driver.  At least the first one is a nasty abuse of internal
> APIs introduced in 5.4-rc which I'd prefer to be fixed before 5.4 final.

Please add the alignment code for 16K or whatever they need and I'll apply
this series.

Thanks.

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: ioc3_eth DMA API fixes
  2019-10-31 21:13 ` ioc3_eth DMA API fixes David Miller
@ 2019-10-31 21:23   ` Christoph Hellwig
  0 siblings, 0 replies; 14+ messages in thread
From: Christoph Hellwig @ 2019-10-31 21:23 UTC (permalink / raw)
  To: David Miller; +Cc: hch, tbogendoerfer, linux-mips, netdev, linux-kernel

On Thu, Oct 31, 2019 at 02:13:34PM -0700, David Miller wrote:
> From: Christoph Hellwig <hch@lst.de>
> Date: Wed, 30 Oct 2019 14:12:29 -0700
> 
> > Hi Dave and Thomas,
> > 
> > please take a look at this series which fixes DMA API usage in the ioc3
> > ethernet driver.  At least the first one is a nasty abuse of internal
> > APIs introduced in 5.4-rc which I'd prefer to be fixed before 5.4 final.
> 
> Please add the alignment code for 16K or whatever they need and I'll apply
> this series.

I'll let Thomas add this as this series doesn't change anything in that
regard.

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, back to index

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-30 21:12 ioc3_eth DMA API fixes Christoph Hellwig
2019-10-30 21:12 ` [PATCH 1/4] net: sgi: ioc3-eth: don't abuse dma_direct_* calls Christoph Hellwig
2019-10-30 22:05   ` Thomas Bogendoerfer
2019-10-30 22:38     ` Christoph Hellwig
2019-10-31  8:54       ` Thomas Bogendoerfer
2019-10-31 13:15         ` Christoph Hellwig
2019-10-31 15:18           ` Thomas Bogendoerfer
2019-10-31 17:01             ` Christoph Hellwig
2019-10-31 19:15             ` David Miller
2019-10-30 21:12 ` [PATCH 2/4] net: sgi: ioc3-eth: fix usage of GFP_* flags Christoph Hellwig
2019-10-30 21:12 ` [PATCH 3/4] net: sgi: ioc3-eth: simplify setting the DMA mask Christoph Hellwig
2019-10-30 21:12 ` [PATCH 4/4] net: sgi: ioc3-eth: fix setting NETIF_F_HIGHDMA Christoph Hellwig
2019-10-31 21:13 ` ioc3_eth DMA API fixes David Miller
2019-10-31 21:23   ` Christoph Hellwig

Linux-MIPS Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mips/0 linux-mips/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mips linux-mips/ https://lore.kernel.org/linux-mips \
		linux-mips@vger.kernel.org
	public-inbox-index linux-mips

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-mips


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git