Linux-MIPS Archive on lore.kernel.org
 help / color / Atom feed
From: Thomas Bogendoerfer <tbogendoerfer@suse.de>
To: Ralf Baechle <ralf@linux-mips.org>,
	"David S. Miller" <davem@davemloft.net>,
	linux-mips@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>
Subject: [net v2 3/4] net: sgi: ioc3-eth: simplify setting the DMA mask
Date: Sun,  3 Nov 2019 11:34:32 +0100
Message-ID: <20191103103433.26826-3-tbogendoerfer@suse.de> (raw)
In-Reply-To: <20191103103433.26826-1-tbogendoerfer@suse.de>

From: Christoph Hellwig <hch@lst.de>

There is no need to fall back to a lower mask these days, the DMA mask
just communictes the hardware supported features.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/net/ethernet/sgi/ioc3-eth.c | 27 +++++++--------------------
 1 file changed, 7 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/sgi/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c
index d1546f04d1fd..83abc8a13508 100644
--- a/drivers/net/ethernet/sgi/ioc3-eth.c
+++ b/drivers/net/ethernet/sgi/ioc3-eth.c
@@ -1174,26 +1174,14 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct ioc3 *ioc3;
 	unsigned long ioc3_base, ioc3_size;
 	u32 vendor, model, rev;
-	int err, pci_using_dac;
+	int err;
 
 	/* Configure DMA attributes. */
-	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
-	if (!err) {
-		pci_using_dac = 1;
-		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
-		if (err < 0) {
-			pr_err("%s: Unable to obtain 64 bit DMA for consistent allocations\n",
-			       pci_name(pdev));
-			goto out;
-		}
-	} else {
-		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-		if (err) {
-			pr_err("%s: No usable DMA configuration, aborting.\n",
-			       pci_name(pdev));
-			goto out;
-		}
-		pci_using_dac = 0;
+	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+	if (err) {
+		pr_err("%s: No usable DMA configuration, aborting.\n",
+		       pci_name(pdev));
+		goto out;
 	}
 
 	if (pci_enable_device(pdev))
@@ -1205,8 +1193,7 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto out_disable;
 	}
 
-	if (pci_using_dac)
-		dev->features |= NETIF_F_HIGHDMA;
+	dev->features |= NETIF_F_HIGHDMA;
 
 	err = pci_request_regions(pdev, "ioc3");
 	if (err)
-- 
2.16.4


  parent reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-03 10:34 [net v2 1/4] net: sgi: ioc3-eth: don't abuse dma_direct_* calls Thomas Bogendoerfer
2019-11-03 10:34 ` [net v2 2/4] net: sgi: ioc3-eth: fix usage of GFP_* flags Thomas Bogendoerfer
2019-11-03 10:34 ` Thomas Bogendoerfer [this message]
2019-11-03 18:41   ` [net v2 3/4] net: sgi: ioc3-eth: simplify setting the DMA mask Sergei Shtylyov
2019-11-03 10:34 ` [net v2 4/4] net: sgi: ioc3-eth: fix setting NETIF_F_HIGHDMA Thomas Bogendoerfer
2019-11-03 18:45   ` Sergei Shtylyov
2019-11-04  0:34 ` [net v2 1/4] net: sgi: ioc3-eth: don't abuse dma_direct_* calls Christoph Hellwig
2019-11-04  0:45   ` (metabare) net: sgi: ioc3-eth Carlo Pisani

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191103103433.26826-3-tbogendoerfer@suse.de \
    --to=tbogendoerfer@suse.de \
    --cc=davem@davemloft.net \
    --cc=hch@lst.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-MIPS Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mips/0 linux-mips/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mips linux-mips/ https://lore.kernel.org/linux-mips \
		linux-mips@vger.kernel.org
	public-inbox-index linux-mips

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-mips


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git