Re: [PATCH v5 01/19] KVM: x86: Allocate new rmap and large page tracking when moving memslot

From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Peter Xu <peterx@redhat.com>
Cc: "Paolo Bonzini" <pbonzini@redhat.com>,
	"Paul Mackerras" <paulus@ozlabs.org>,
	"Christian Borntraeger" <borntraeger@de.ibm.com>,
	"Janosch Frank" <frankja@linux.ibm.com>,
	"David Hildenbrand" <david@redhat.com>,
	"Cornelia Huck" <cohuck@redhat.com>,
	"Vitaly Kuznetsov" <vkuznets@redhat.com>,
	"Wanpeng Li" <wanpengli@tencent.com>,
	"Jim Mattson" <jmattson@google.com>,
	"Joerg Roedel" <joro@8bytes.org>, "Marc Zyngier" <maz@kernel.org>,
	"James Morse" <james.morse@arm.com>,
	"Julien Thierry" <julien.thierry.kdev@gmail.com>,
	"Suzuki K Poulose" <suzuki.poulose@arm.com>,
	linux-mips@vger.kernel.org, kvm@vger.kernel.org,
	kvm-ppc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	kvmarm@lists.cs.columbia.edu, linux-kernel@vger.kernel.org,
	"Christoffer Dall" <christoffer.dall@arm.com>,
	"Philippe Mathieu-Daudé" <f4bug@amsat.org>
Subject: Re: [PATCH v5 01/19] KVM: x86: Allocate new rmap and large page tracking when moving memslot
Date: Wed, 5 Feb 2020 15:55:33 -0800	[thread overview]
Message-ID: <20200205235533.GA7631@linux.intel.com> (raw)
In-Reply-To: <20200205214952.GD387680@xz-x1>

On Wed, Feb 05, 2020 at 04:49:52PM -0500, Peter Xu wrote:
> On Tue, Jan 21, 2020 at 02:31:39PM -0800, Sean Christopherson wrote:
> > Reallocate a rmap array and recalcuate large page compatibility when
> > moving an existing memslot to correctly handle the alignment properties
> > of the new memslot.  The number of rmap entries required at each level
> > is dependent on the alignment of the memslot's base gfn with respect to
> > that level, e.g. moving a large-page aligned memslot so that it becomes
> > unaligned will increase the number of rmap entries needed at the now
> > unaligned level.
> > 
> > Not updating the rmap array is the most obvious bug, as KVM accesses
> > garbage data beyond the end of the rmap.  KVM interprets the bad data as
> > pointers, leading to non-canonical #GPs, unexpected #PFs, etc...
> > 
> >   general protection fault: 0000 [#1] SMP
> >   CPU: 0 PID: 1909 Comm: move_memory_reg Not tainted 5.4.0-rc7+ #139
> >   Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
> >   RIP: 0010:rmap_get_first+0x37/0x50 [kvm]
> >   Code: <48> 8b 3b 48 85 ff 74 ec e8 6c f4 ff ff 85 c0 74 e3 48 89 d8 5b c3
> >   RSP: 0018:ffffc9000021bbc8 EFLAGS: 00010246
> >   RAX: ffff00617461642e RBX: ffff00617461642e RCX: 0000000000000012
> >   RDX: ffff88827400f568 RSI: ffffc9000021bbe0 RDI: ffff88827400f570
> >   RBP: 0010000000000000 R08: ffffc9000021bd00 R09: ffffc9000021bda8
> >   R10: ffffc9000021bc48 R11: 0000000000000000 R12: 0030000000000000
> >   R13: 0000000000000000 R14: ffff88827427d700 R15: ffffc9000021bce8
> >   FS:  00007f7eda014700(0000) GS:ffff888277a00000(0000) knlGS:0000000000000000
> >   CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >   CR2: 00007f7ed9216ff8 CR3: 0000000274391003 CR4: 0000000000162eb0
> >   Call Trace:
> >    kvm_mmu_slot_set_dirty+0xa1/0x150 [kvm]
> >    __kvm_set_memory_region.part.64+0x559/0x960 [kvm]
> >    kvm_set_memory_region+0x45/0x60 [kvm]
> >    kvm_vm_ioctl+0x30f/0x920 [kvm]
> >    do_vfs_ioctl+0xa1/0x620
> >    ksys_ioctl+0x66/0x70
> >    __x64_sys_ioctl+0x16/0x20
> >    do_syscall_64+0x4c/0x170
> >    entry_SYSCALL_64_after_hwframe+0x44/0xa9
> >   RIP: 0033:0x7f7ed9911f47
> >   Code: <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 21 6f 2c 00 f7 d8 64 89 01 48
> >   RSP: 002b:00007ffc00937498 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
> >   RAX: ffffffffffffffda RBX: 0000000001ab0010 RCX: 00007f7ed9911f47
> >   RDX: 0000000001ab1350 RSI: 000000004020ae46 RDI: 0000000000000004
> >   RBP: 000000000000000a R08: 0000000000000000 R09: 00007f7ed9214700
> >   R10: 00007f7ed92149d0 R11: 0000000000000246 R12: 00000000bffff000
> >   R13: 0000000000000003 R14: 00007f7ed9215000 R15: 0000000000000000
> >   Modules linked in: kvm_intel kvm irqbypass
> >   ---[ end trace 0c5f570b3358ca89 ]---
> > 
> > The disallow_lpage tracking is more subtle.  Failure to update results
> > in KVM creating large pages when it shouldn't, either due to stale data
> > or again due to indexing beyond the end of the metadata arrays, which
> > can lead to memory corruption and/or leaking data to guest/userspace.
> > 
> > Note, the arrays for the old memslot are freed by the unconditional call
> > to kvm_free_memslot() in __kvm_set_memory_region().
> 
> If __kvm_set_memory_region() failed, I think the old memslot will be
> kept and the new memslot will be freed instead?

This is referring to a successful MOVE operation to note that zeroing @arch
in kvm_arch_create_memslot() won't leak memory.

> > 
> > Fixes: 05da45583de9b ("KVM: MMU: large page support")
> > Cc: stable@vger.kernel.org
> > Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
> > ---
> >  arch/x86/kvm/x86.c | 11 +++++++++++
> >  1 file changed, 11 insertions(+)
> > 
> > diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> > index 4c30ebe74e5d..1953c71c52f2 100644
> > --- a/arch/x86/kvm/x86.c
> > +++ b/arch/x86/kvm/x86.c
> > @@ -9793,6 +9793,13 @@ int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot,
> >  {
> >  	int i;
> >  
> > +	/*
> > +	 * Clear out the previous array pointers for the KVM_MR_MOVE case.  The
> > +	 * old arrays will be freed by __kvm_set_memory_region() if installing
> > +	 * the new memslot is successful.
> > +	 */
> > +	memset(&slot->arch, 0, sizeof(slot->arch));
> 
> I actually gave r-b on this patch but it was lost... And then when I
> read it again I start to confuse on why we need to set these to zeros.
> Even if they're not zeros, iiuc kvm_free_memslot() will compare each
> of the array pointer and it will only free the changed pointers, then
> it looks fine even without zeroing?

It's for the failure path, the out_free label, which blindy calls kvfree()
and relies on un-allocated pointers being NULL.  If @arch isn't zeroed, the
failure path will free metadata from the previous memslot.

> > +
> >  	for (i = 0; i < KVM_NR_PAGE_SIZES; ++i) {
> >  		struct kvm_lpage_info *linfo;
> >  		unsigned long ugfn;
> > @@ -9867,6 +9874,10 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
> >  				const struct kvm_userspace_memory_region *mem,
> >  				enum kvm_mr_change change)
> >  {
> > +	if (change == KVM_MR_MOVE)
> > +		return kvm_arch_create_memslot(kvm, memslot,
> > +					       mem->memory_size >> PAGE_SHIFT);
> > +
> 
> Instead of calling kvm_arch_create_memslot() explicitly again here,
> can it be replaced by below?
> 
> diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
> index 72b45f491692..85a7b02fd752 100644
> --- a/virt/kvm/kvm_main.c
> +++ b/virt/kvm/kvm_main.c
> @@ -1144,7 +1144,7 @@ int __kvm_set_memory_region(struct kvm *kvm,
>                 new.dirty_bitmap = NULL;
>  
>         r = -ENOMEM;
> -       if (change == KVM_MR_CREATE) {
> +       if (change == KVM_MR_CREATE || change == KVM_MR_MOVE) {
>                 new.userspace_addr = mem->userspace_addr;
>  
>                 if (kvm_arch_create_memslot(kvm, &new, npages))

No, because other architectures don't need to re-allocate new metadata on
MOVE and rely on __kvm_set_memory_region() to copy @arch from old to new,
e.g. see kvmppc_core_create_memslot_hv().

That being said, that's effectively what the x86 code looks like once
kvm_arch_create_memslot() gets merged into kvm_arch_prepare_memory_region().

> 
> >  	return 0;
> >  }
> >  
> > -- 
> > 2.24.1
> > 
> 
> -- 
> Peter Xu
> 