[PATCH 0/6] mips: Add DT bindings for MIPS CDMM and GIC

[PATCH 0/6] mips: Add DT bindings for MIPS CDMM and GIC

[Serge Semin]

Recently I've submitted a series of patchset's which provided multiple fixes
for the MIPS arch subsystem and the MIPS GIC and DW APB Timer drivers, which
were required for the Baikal-T1 SoC correctly working with those drivers.
Mostly those patchsets have been already merged into the corresponding
subsystems, but several patches have been left floating since noone really
responded for review except Rob provided his approval regarding DT
bindings. So here in this patchset I've collected all the leftovers so not
to loose them in a pale of the maintainers email logs.

The patchset includes the following updates: MIPS CPC and GIC DT bindings
legacy text-based file are converted to the DT schema (Rob has already
reviewed them), add MIPS CDMM DT node support to place the CDMM block at
the platform-specific MMIO range, make sure MIPS CDMM is available for
MIPS_R5 CPUs.

Seeing the series concerns the MIPS-related drivers it's better to merge
it in through the MIPS repository:
https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/

This patchset is rebased and tested on the mainline Linux kernel 5.7-rc4:
base-commit: 0e698dfa2822 ("Linux 5.7-rc4")
tag: v5.7-rc4

Suggestion.
Since Paul isn't looking after the MIPS arch code anymore, Ralf hasn't
been seen maintaining MIPS for a long time and Thomas is only responsible
for the next part of it:
	F:      Documentation/devicetree/bindings/mips/
	F:      Documentation/mips/
	F:      arch/mips/
	F:      drivers/platform/mips/
the MIPS-specific drivers like:
	F:	drivers/bus/mips_cdmm.c
	F:	drivers/irqchip/irq-mips-cpu.c
	F:	drivers/irqchip/irq-mips-gic.c
	F:	drivers/clocksource/mips-gic-timer.c
	F:	drivers/cpuidle/cpuidle-cps.c
seem to be left for the subsystems maintainers to support. So if you don't
mind or unless there is a better alternative, I can help with looking
after them since I'll be working on our MIPS-based SoC drivers integrating
into the mainline kernel repo anyway. It's Baikal-T1 SoC based MIPS Warrior
P5600 CPU core (you might have noticed a lot of drivers/patches I've
recently submitted for review). If you don't like this idea, please just
decline the last patch in the series.

Previous patchsets:
mips: Prepare MIPS-arch code for Baikal-T1 SoC support:
Link: https://lore.kernel.org/linux-mips/20200306124807.3596F80307C2@mail.baikalelectronics.ru
Link: https://lore.kernel.org/linux-mips/20200506174238.15385-1-Sergey.Semin@baikalelectronics.ru
Link: https://lore.kernel.org/linux-mips/20200521140725.29571-1-Sergey.Semin@baikalelectronics.ru

clocksource: Fix MIPS GIC and DW APB Timer for Baikal-T1 SoC support:
Link: https://lore.kernel.org/linux-rtc/20200324174325.14213-1-Sergey.Semin@baikalelectronics.ru
Link: https://lore.kernel.org/linux-rtc/20200506214107.25956-1-Sergey.Semin@baikalelectronics.ru
Link: https://lore.kernel.org/linux-rtc/20200521005321.12129-1-Sergey.Semin@baikalelectronics.ru

Changelog prev:
- Add yaml-based bindings file for MIPS CDMM dt-node.
- Convert mti,mips-cpc to DT schema.
- Use a shorter summary describing the bindings modification patches.
- Rearrange the SoBs with adding Alexey' co-development tag.
- Lowercase the hex numbers in the dt-bindings.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Serge Semin (6):
  dt-bindings: power: Convert mti,mips-cpc to DT schema
  dt-bindings: interrupt-controller: Convert mti,gic to DT schema
  dt-bindings: bus: Add MIPS CDMM controller
  mips: cdmm: Add mti,mips-cdmm dtb node support
  bus: cdmm: Add MIPS R5 arch support
  MAINTAINERS: Add maintainers for MIPS core drivers

 .../bindings/bus/mti,mips-cdmm.yaml           |  35 +++++
 .../interrupt-controller/mips-gic.txt         |  67 --------
 .../interrupt-controller/mti,gic.yaml         | 148 ++++++++++++++++++
 .../bindings/power/mti,mips-cpc.txt           |   8 -
 .../bindings/power/mti,mips-cpc.yaml          |  35 +++++
 MAINTAINERS                                   |  10 ++
 drivers/bus/Kconfig                           |   2 +-
 drivers/bus/mips_cdmm.c                       |  15 ++
 8 files changed, 244 insertions(+), 76 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
 delete mode 100644 Documentation/devicetree/bindings/power/mti,mips-cpc.txt
 create mode 100644 Documentation/devicetree/bindings/power/mti,mips-cpc.yaml

-- 
2.26.2

[PATCH 1/6] dt-bindings: power: Convert mti,mips-cpc to DT schema

[Serge Semin]

It's a Cluster Power Controller embedded into the MIPS IP cores.
Currently the corresponding dts node is supposed to have compatible
and reg properties.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>

---

Changelog prev:
- Reword the changelog summary - use shorter version.
- Lowercase the example hex'es.
---
 .../bindings/power/mti,mips-cpc.txt           |  8 -----
 .../bindings/power/mti,mips-cpc.yaml          | 35 +++++++++++++++++++
 2 files changed, 35 insertions(+), 8 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/power/mti,mips-cpc.txt
 create mode 100644 Documentation/devicetree/bindings/power/mti,mips-cpc.yaml

diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.txt b/Documentation/devicetree/bindings/power/mti,mips-cpc.txt
deleted file mode 100644
index c6b82511ae8a..000000000000
--- a/Documentation/devicetree/bindings/power/mti,mips-cpc.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-Binding for MIPS Cluster Power Controller (CPC).
-
-This binding allows a system to specify where the CPC registers are
-located.
-
-Required properties:
-compatible : Should be "mti,mips-cpc".
-regs: Should describe the address & size of the CPC register region.
diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml
new file mode 100644
index 000000000000..9cd92a57130c
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/mti,mips-cpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS Cluster Power Controller
+
+description: |
+  Defines a location of the MIPS Cluster Power Controller registers.
+
+maintainers:
+  - Paul Burton <paulburton@kernel.org>
+
+properties:
+  compatible:
+    const: mti,mips-cpc
+
+  reg:
+    description: |
+      Base address and size of an unoccupied memory region, which will be
+      used to map the MIPS CPC registers block.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    cpc@1bde0000 {
+      compatible = "mti,mips-cpc";
+      reg = <0 0x1bde0000 0 0x8000>;
+    };
+...
-- 
2.26.2

[PATCH 2/6] dt-bindings: interrupt-controller: Convert mti,gic to DT schema

[Serge Semin]

Modern device tree bindings are supposed to be created as YAML-files
in accordance with DT schema. This commit replaces MIPS GIC legacy bare
text binding with YAML file. As before the binding file states that the
corresponding dts node is supposed to be compatible with MIPS Global
Interrupt Controller indicated by the "mti,gic" compatible string and
to provide a mandatory interrupt-controller and '#interrupt-cells'
properties. There might be optional registers memory range,
"mti,reserved-cpu-vectors" and "mti,reserved-ipi-vectors" properties
specified.

MIPS GIC also includes a free-running global timer, per-CPU count/compare
timers, and a watchdog. Since currently the GIC Timer is only supported the
DT schema expects an IRQ and clock-phandler charged timer sub-node with
"mti,mips-gic-timer" compatible string.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>

---

I don't really know who is the corresponding driver maintainer, so I
added Paul to the maintainers property since he used to be looking for the
MIPS arch and Thomas looking after it now. Any idea what email should be
specified there instead?

Changelog prev:
- Since timer sub-node has no unit-address, the node shouldn't be named
  with one. So alter the MIPS GIC bindings to have a pure "timer"
  sub-node.
- Discard allOf: [ $ref: /schemas/interrupt-controller.yaml# ].
- Since it's a conversion patch use GPL-2.0-only SPDX header.
---
 .../interrupt-controller/mips-gic.txt         |  67 --------
 .../interrupt-controller/mti,gic.yaml         | 148 ++++++++++++++++++
 2 files changed, 148 insertions(+), 67 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
deleted file mode 100644
index 173595305e26..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-MIPS Global Interrupt Controller (GIC)
-
-The MIPS GIC routes external interrupts to individual VPEs and IRQ pins.
-It also supports local (per-processor) interrupts and software-generated
-interrupts which can be used as IPIs.  The GIC also includes a free-running
-global timer, per-CPU count/compare timers, and a watchdog.
-
-Required properties:
-- compatible : Should be "mti,gic".
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt specifier.  Should be 3.
-  - The first cell is the type of interrupt, local or shared.
-    See <include/dt-bindings/interrupt-controller/mips-gic.h>.
-  - The second cell is the GIC interrupt number.
-  - The third cell encodes the interrupt flags.
-    See <include/dt-bindings/interrupt-controller/irq.h> for a list of valid
-    flags.
-
-Optional properties:
-- reg : Base address and length of the GIC registers.  If not present,
-  the base address reported by the hardware GCR_GIC_BASE will be used.
-- mti,reserved-cpu-vectors : Specifies the list of CPU interrupt vectors
-  to which the GIC may not route interrupts.  Valid values are 2 - 7.
-  This property is ignored if the CPU is started in EIC mode.
-- mti,reserved-ipi-vectors : Specifies the range of GIC interrupts that are
-  reserved for IPIs.
-  It accepts 2 values, the 1st is the starting interrupt and the 2nd is the size
-  of the reserved range.
-  If not specified, the driver will allocate the last 2 * number of VPEs in the
-  system.
-
-Required properties for timer sub-node:
-- compatible : Should be "mti,gic-timer".
-- interrupts : Interrupt for the GIC local timer.
-
-Optional properties for timer sub-node:
-- clocks : GIC timer operating clock.
-- clock-frequency : Clock frequency at which the GIC timers operate.
-
-Note that one of clocks or clock-frequency must be specified.
-
-Example:
-
-	gic: interrupt-controller@1bdc0000 {
-		compatible = "mti,gic";
-		reg = <0x1bdc0000 0x20000>;
-
-		interrupt-controller;
-		#interrupt-cells = <3>;
-
-		mti,reserved-cpu-vectors = <7>;
-		mti,reserved-ipi-vectors = <40 8>;
-
-		timer {
-			compatible = "mti,gic-timer";
-			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
-			clock-frequency = <50000000>;
-		};
-	};
-
-	uart@18101400 {
-		...
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
-		...
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
new file mode 100644
index 000000000000..9f0eb3addac4
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mti,gic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS Global Interrupt Controller
+
+maintainers:
+  - Paul Burton <paulburton@kernel.org>
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+description: |
+  The MIPS GIC routes external interrupts to individual VPEs and IRQ pins.
+  It also supports local (per-processor) interrupts and software-generated
+  interrupts which can be used as IPIs. The GIC also includes a free-running
+  global timer, per-CPU count/compare timers, and a watchdog.
+
+properties:
+  compatible:
+    const: mti,gic
+
+  "#interrupt-cells":
+    const: 3
+    description: |
+      The 1st cell is the type of interrupt: local or shared defined in the
+      file 'dt-bindings/interrupt-controller/mips-gic.h'. The 2nd cell is the
+      GIC interrupt number. The 3d cell encodes the interrupt flags setting up
+      the IRQ trigger modes, which are defined in the file
+      'dt-bindings/interrupt-controller/irq.h'.
+
+  reg:
+    description: |
+      Base address and length of the GIC registers space. If not present,
+      the base address reported by the hardware GCR_GIC_BASE will be used.
+    maxItems: 1
+
+  interrupt-controller: true
+
+  mti,reserved-cpu-vectors:
+    description: |
+      Specifies the list of CPU interrupt vectors to which the GIC may not
+      route interrupts. This property is ignored if the CPU is started in EIC
+      mode.
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/uint32-array
+      - minItems: 1
+        maxItems: 6
+        uniqueItems: true
+        items:
+          minimum: 2
+          maximum: 7
+
+  mti,reserved-ipi-vectors:
+    description: |
+      Specifies the range of GIC interrupts that are reserved for IPIs.
+      It accepts two values: the 1st is the starting interrupt and the 2nd is
+      the size of the reserved range. If not specified, the driver will
+      allocate the last (2 * number of VPEs in the system).
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/uint32-array
+      - items:
+          - minimum: 0
+            maximum: 254
+          - minimum: 2
+            maximum: 254
+
+  timer:
+    type: object
+    description: |
+      MIPS GIC includes a free-running global timer, per-CPU count/compare
+      timers, and a watchdog. Currently only the GIC Timer is supported.
+    properties:
+      compatible:
+        const: mti,gic-timer
+
+      interrupts:
+        description: |
+          Interrupt for the GIC local timer, so normally it's suppose to be of
+          <GIC_LOCAL X IRQ_TYPE_NONE> format.
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-frequency: true
+
+    required:
+      - compatible
+      - interrupts
+
+    oneOf:
+      - required:
+          - clocks
+      - required:
+          - clock-frequency
+
+    additionalProperties: false
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - "#interrupt-cells"
+  - interrupt-controller
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    interrupt-controller@1bdc0000 {
+      compatible = "mti,gic";
+      reg = <0x1bdc0000 0x20000>;
+      interrupt-controller;
+      #interrupt-cells = <3>;
+      mti,reserved-cpu-vectors = <7>;
+      mti,reserved-ipi-vectors = <40 8>;
+
+      timer {
+        compatible = "mti,gic-timer";
+        interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+        clock-frequency = <50000000>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    interrupt-controller@1bdc0000 {
+      compatible = "mti,gic";
+      reg = <0x1bdc0000 0x20000>;
+      interrupt-controller;
+      #interrupt-cells = <3>;
+
+      timer {
+        compatible = "mti,gic-timer";
+        interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+        clocks = <&cpu_pll>;
+      };
+    };
+  - |
+    interrupt-controller {
+      compatible = "mti,gic";
+      interrupt-controller;
+      #interrupt-cells = <3>;
+    };
+...
-- 
2.26.2

[PATCH 3/6] dt-bindings: bus: Add MIPS CDMM controller

[Serge Semin]

It's a Common Device Memory Map controller embedded into the MIPS IP
cores, which dts node is supposed to have compatible and reg properties.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>

---

Changelog prev:
- Lowercase the example hex'es.
---
 .../bindings/bus/mti,mips-cdmm.yaml           | 35 +++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml

diff --git a/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml
new file mode 100644
index 000000000000..b3ba98515cbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/mti,mips-cdmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS Common Device Memory Map
+
+description: |
+  Defines a location of the MIPS Common Device Memory Map registers.
+
+maintainers:
+  - James Hogan <jhogan@kernel.org>
+
+properties:
+  compatible:
+    const: mti,mips-cdmm
+
+  reg:
+    description: |
+      Base address and size of an unoccupied memory region, which will be
+      used to map the MIPS CDMM registers block.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    cdmm@1bde8000 {
+      compatible = "mti,mips-cdmm";
+      reg = <0 0x1bde8000 0 0x8000>;
+    };
+...
-- 
2.26.2

[PATCH 4/6] mips: cdmm: Add mti,mips-cdmm dtb node support

[Serge Semin]

Since having and mapping the CDMM block is platform specific, then
instead of just returning a zero-address, lets make the default CDMM
base address search method (mips_cdmm_phys_base()) to do something
useful. For instance to find the address in a dedicated dtb-node in
order to support of-based platforms by default.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>

---

Changelog prev:
- Use alphabetical order for the include pre-processor operator.
---
 drivers/bus/mips_cdmm.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/bus/mips_cdmm.c b/drivers/bus/mips_cdmm.c
index 1b14256376d2..9f7ed1fcd428 100644
--- a/drivers/bus/mips_cdmm.c
+++ b/drivers/bus/mips_cdmm.c
@@ -13,6 +13,8 @@
 #include <linux/cpu.h>
 #include <linux/cpumask.h>
 #include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/smp.h>
@@ -337,9 +339,22 @@ static phys_addr_t mips_cdmm_cur_base(void)
  * Picking a suitable physical address at which to map the CDMM region is
  * platform specific, so this weak function can be overridden by platform
  * code to pick a suitable value if none is configured by the bootloader.
+ * By default this method tries to find a CDMM-specific node in the system
+ * dtb. Note that this won't work for early serial console.
  */
 phys_addr_t __weak mips_cdmm_phys_base(void)
 {
+	struct device_node *np;
+	struct resource res;
+	int err;
+
+	np = of_find_compatible_node(NULL, NULL, "mti,mips-cdmm");
+	if (np) {
+		err = of_address_to_resource(np, 0, &res);
+		if (!err)
+			return res.start;
+	}
+
 	return 0;
 }
 
-- 
2.26.2

[PATCH 5/6] bus: cdmm: Add MIPS R5 arch support

[Serge Semin]

CDMM may be available not only on MIPS R2 architectures, but also on
newer MIPS R5 chips. For instance our P5600 chip has one. Let's mark
the CDMM bus being supported for that MIPS arch too.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
---
 drivers/bus/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 6d4e4497b59b..971c07bc92d4 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -58,7 +58,7 @@ config IMX_WEIM
 
 config MIPS_CDMM
 	bool "MIPS Common Device Memory Map (CDMM) Driver"
-	depends on CPU_MIPSR2
+	depends on CPU_MIPSR2 || CPU_MIPSR5
 	help
 	  Driver needed for the MIPS Common Device Memory Map bus in MIPS
 	  cores. This bus is for per-CPU tightly coupled devices such as the
-- 
2.26.2

[PATCH 6/6] MAINTAINERS: Add maintainers for MIPS core drivers

[Serge Semin]

Add myself as a maintainer of MIPS CPU and GIC IRQchip, MIPS GIC timer
and MIPS CPS CPUidle drivers.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
 MAINTAINERS | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 2926327e4976..f21e51c4a0d5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11278,6 +11278,16 @@ F:	arch/mips/configs/generic/board-boston.config
 F:	drivers/clk/imgtec/clk-boston.c
 F:	include/dt-bindings/clock/boston-clock.h
 
+MIPS CORE DRIVERS
+M:	Serge Semin <fancer.lancer@gmail.com>
+L:	linux-mips@vger.kernel.org
+S:	Supported
+F:	drivers/bus/mips_cdmm.c
+F:	drivers/irqchip/irq-mips-cpu.c
+F:	drivers/irqchip/irq-mips-gic.c
+F:	drivers/clocksource/mips-gic-timer.c
+F:	drivers/cpuidle/cpuidle-cps.c
+
 MIPS GENERIC PLATFORM
 M:	Paul Burton <paulburton@kernel.org>
 L:	linux-mips@vger.kernel.org
-- 
2.26.2