[PATCH v3 0/5] MIPS: Loongson64: Process ISA Node in DeviceTree

[PATCH v3 0/5] MIPS: Loongson64: Process ISA Node in DeviceTree

[Jiaxun Yang]

Hi,

This series convert reservation of Loongson64 Logic PIO into DeviceTree based
method.

It can be used to replace Huacai's
"MIPS: Loongson64: Reserve legacy MMIO space according to bridge type".

Thanks.

v2:
  - Address Rob and Huacai's review comments.
v3:
  - Address Rob, Thomas's review comments.

Jiaxun Yang (5):
  of_address: Add bus type match for pci ranges parser
  MIPS: Loongson64: Process ISA Node in DeviceTree
  MIPS: Loongson64: Enlarge IO_SPACE_LIMIT
  MIPS: Loongson64: DTS: Fix ISA range for RS780E PCH
  MIPS: Loongson64: Add ISA node for LS7A PCH

 arch/mips/boot/dts/loongson/ls7a-pch.dtsi     |  7 ++
 arch/mips/boot/dts/loongson/rs780e-pch.dtsi   |  2 +-
 arch/mips/include/asm/io.h                    |  2 -
 arch/mips/include/asm/mach-generic/spaces.h   |  4 +
 .../mips/include/asm/mach-loongson64/spaces.h |  3 +-
 arch/mips/loongson64/init.c                   | 87 +++++++++++++------
 drivers/of/address.c                          | 29 ++++---
 include/linux/of_address.h                    |  4 +
 8 files changed, 96 insertions(+), 42 deletions(-)

-- 
2.28.0.rc1

[PATCH v3 1/5] of_address: Add bus type match for pci ranges parser

[Jiaxun Yang]

So the parser can be used to parse range property of ISA bus.

As they're all using PCI-like method of range property, there is no need
start a new parser.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>

--
v2: Drop useless check, fix some na for bus_addr
	add define of of_range_parser_init according to
	Rob's suggestion.
v3: Abstract out has_flags. simplify define.
---
 drivers/of/address.c       | 29 +++++++++++++++++------------
 include/linux/of_address.h |  4 ++++
 2 files changed, 21 insertions(+), 12 deletions(-)

diff --git a/drivers/of/address.c b/drivers/of/address.c
index 8eea3f6e29a4..813936d419ad 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -49,6 +49,7 @@ struct of_bus {
 	u64		(*map)(__be32 *addr, const __be32 *range,
 				int na, int ns, int pna);
 	int		(*translate)(__be32 *addr, u64 offset, int na);
+	bool	has_flags;
 	unsigned int	(*get_flags)(const __be32 *addr);
 };
 
@@ -364,6 +365,7 @@ static struct of_bus of_busses[] = {
 		.count_cells = of_bus_pci_count_cells,
 		.map = of_bus_pci_map,
 		.translate = of_bus_pci_translate,
+		.has_flags = true,
 		.get_flags = of_bus_pci_get_flags,
 	},
 #endif /* CONFIG_PCI */
@@ -375,6 +377,7 @@ static struct of_bus of_busses[] = {
 		.count_cells = of_bus_isa_count_cells,
 		.map = of_bus_isa_map,
 		.translate = of_bus_isa_translate,
+		.has_flags = true,
 		.get_flags = of_bus_isa_get_flags,
 	},
 	/* Default */
@@ -698,9 +701,10 @@ static int parser_init(struct of_pci_range_parser *parser,
 
 	parser->node = node;
 	parser->pna = of_n_addr_cells(node);
-	parser->na = of_bus_n_addr_cells(node);
-	parser->ns = of_bus_n_size_cells(node);
 	parser->dma = !strcmp(name, "dma-ranges");
+	parser->bus = of_match_bus(node);
+
+	parser->bus->count_cells(parser->node, &parser->na, &parser->ns);
 
 	parser->range = of_get_property(node, name, &rlen);
 	if (parser->range == NULL)
@@ -732,6 +736,7 @@ struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser,
 	int na = parser->na;
 	int ns = parser->ns;
 	int np = parser->pna + na + ns;
+	int busflag_na = 0;
 
 	if (!range)
 		return NULL;
@@ -739,12 +744,13 @@ struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser,
 	if (!parser->range || parser->range + np > parser->end)
 		return NULL;
 
-	if (parser->na == 3)
-		range->flags = of_bus_pci_get_flags(parser->range);
-	else
-		range->flags = 0;
+	range->flags = parser->bus->get_flags(parser->range);
+
+	/* A extra cell for resource flags */
+	if (parser->bus->has_flags)
+		busflag_na = 1;
 
-	range->pci_addr = of_read_number(parser->range, na);
+	range->bus_addr = of_read_number(parser->range + busflag_na, na - busflag_na);
 
 	if (parser->dma)
 		range->cpu_addr = of_translate_dma_address(parser->node,
@@ -759,11 +765,10 @@ struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser,
 	/* Now consume following elements while they are contiguous */
 	while (parser->range + np <= parser->end) {
 		u32 flags = 0;
-		u64 pci_addr, cpu_addr, size;
+		u64 bus_addr, cpu_addr, size;
 
-		if (parser->na == 3)
-			flags = of_bus_pci_get_flags(parser->range);
-		pci_addr = of_read_number(parser->range, na);
+		flags = parser->bus->get_flags(parser->range);
+		bus_addr = of_read_number(parser->range + busflag_na, na - busflag_na);
 		if (parser->dma)
 			cpu_addr = of_translate_dma_address(parser->node,
 					parser->range + na);
@@ -774,7 +779,7 @@ struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser,
 
 		if (flags != range->flags)
 			break;
-		if (pci_addr != range->pci_addr + range->size ||
+		if (bus_addr != range->bus_addr + range->size ||
 		    cpu_addr != range->cpu_addr + range->size)
 			break;
 
diff --git a/include/linux/of_address.h b/include/linux/of_address.h
index 763022ed3456..88bc943405cd 100644
--- a/include/linux/of_address.h
+++ b/include/linux/of_address.h
@@ -6,8 +6,11 @@
 #include <linux/of.h>
 #include <linux/io.h>
 
+struct of_bus;
+
 struct of_pci_range_parser {
 	struct device_node *node;
+	struct of_bus *bus;
 	const __be32 *range;
 	const __be32 *end;
 	int na;
@@ -119,6 +122,7 @@ static inline void __iomem *of_iomap(struct device_node *device, int index)
 	return NULL;
 }
 #endif
+#define of_range_parser_init of_pci_range_parser_init
 
 #if defined(CONFIG_OF_ADDRESS) && defined(CONFIG_PCI)
 extern const __be32 *of_get_pci_address(struct device_node *dev, int bar_no,
-- 
2.28.0.rc1

[PATCH v3 2/5] MIPS: Loongson64: Process ISA Node in DeviceTree

[Jiaxun Yang]

Previously, we're hardcoding resserved ISA I/O Space in code, now
we're processing reverved I/O via DeviceTree directly. Using the ranges
property to determine the size and address of reserved I/O space.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
--
v2: Use range_parser instead of pci_range_parser
---
 arch/mips/loongson64/init.c | 87 ++++++++++++++++++++++++++-----------
 1 file changed, 62 insertions(+), 25 deletions(-)

diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c
index 59ddadace83f..8ba22c30f312 100644
--- a/arch/mips/loongson64/init.c
+++ b/arch/mips/loongson64/init.c
@@ -7,6 +7,8 @@
 #include <linux/irqchip.h>
 #include <linux/logic_pio.h>
 #include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 #include <asm/bootinfo.h>
 #include <asm/traps.h>
 #include <asm/smp-ops.h>
@@ -63,41 +65,76 @@ void __init prom_free_prom_memory(void)
 {
 }
 
-static __init void reserve_pio_range(void)
+static int __init add_legacy_isa_io(struct fwnode_handle *fwnode, resource_size_t hw_start,
+				    resource_size_t size)
 {
+	int ret = 0;
 	struct logic_pio_hwaddr *range;
+	unsigned long vaddr;
 
 	range = kzalloc(sizeof(*range), GFP_ATOMIC);
 	if (!range)
-		return;
+		return -ENOMEM;
 
-	range->fwnode = &of_root->fwnode;
-	range->size = MMIO_LOWER_RESERVED;
-	range->hw_start = LOONGSON_PCIIO_BASE;
+	range->fwnode = fwnode;
+	range->size = size;
+	range->hw_start = hw_start;
 	range->flags = LOGIC_PIO_CPU_MMIO;
 
-	if (logic_pio_register_range(range)) {
-		pr_err("Failed to reserve PIO range for legacy ISA\n");
-		goto free_range;
+	ret = logic_pio_register_range(range);
+	if (ret) {
+		kfree(range);
+		return ret;
+	}
+
+	/* Legacy ISA must placed at the start of PCI_IOBASE */
+	if (range->io_start != 0) {
+		logic_pio_unregister_range(range);
+		kfree(range);
+		return -EINVAL;
 	}
 
-	if (WARN(range->io_start != 0,
-			"Reserved PIO range does not start from 0\n"))
-		goto unregister;
-
-	/*
-	 * i8259 would access I/O space, so mapping must be done here.
-	 * Please remove it when all drivers can be managed by logic_pio.
-	 */
-	ioremap_page_range(PCI_IOBASE, PCI_IOBASE + MMIO_LOWER_RESERVED,
-				LOONGSON_PCIIO_BASE,
-				pgprot_device(PAGE_KERNEL));
-
-	return;
-unregister:
-	logic_pio_unregister_range(range);
-free_range:
-	kfree(range);
+	vaddr = PCI_IOBASE + range->io_start;
+
+	ioremap_page_range(vaddr, vaddr + size, hw_start, pgprot_device(PAGE_KERNEL));
+
+	return 0;
+}
+
+static __init void reserve_pio_range(void)
+{
+	struct device_node *np;
+
+	for_each_node_by_name(np, "isa") {
+		struct of_range range;
+		struct of_range_parser parser;
+
+		pr_info("ISA Bridge: %pOF\n", np);
+
+		if (of_range_parser_init(&parser, np)) {
+			pr_info("Failed to parse resources.\n");
+			break;
+		}
+
+		for_each_of_range(&parser, &range) {
+			switch (range.flags & IORESOURCE_TYPE_BITS) {
+			case IORESOURCE_IO:
+				pr_info(" IO 0x%016llx..0x%016llx  ->  0x%016llx\n",
+					range.cpu_addr,
+					range.cpu_addr + range.size - 1,
+					range.bus_addr);
+				if (add_legacy_isa_io(&np->fwnode, range.cpu_addr, range.size))
+					pr_warn("Failed to reserve legacy IO in Logic PIO\n");
+				break;
+			case IORESOURCE_MEM:
+				pr_info(" MEM 0x%016llx..0x%016llx  ->  0x%016llx\n",
+					range.cpu_addr,
+					range.cpu_addr + range.size - 1,
+					range.bus_addr);
+				break;
+			}
+		}
+	}
 }
 
 void __init arch_init_irq(void)
-- 
2.28.0.rc1

[PATCH v3 3/5] MIPS: Loongson64: Enlarge IO_SPACE_LIMIT

[Jiaxun Yang]

It can be very big on LS7A PCH systems.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
--
v3: Move IO_SPACE_LIMIT to spaces.h
---
 arch/mips/include/asm/io.h                     | 2 --
 arch/mips/include/asm/mach-generic/spaces.h    | 4 ++++
 arch/mips/include/asm/mach-loongson64/spaces.h | 3 +--
 3 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index 346fffd9e972..8ca53f17c7c2 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -51,8 +51,6 @@
 
 /* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */
 
-#define IO_SPACE_LIMIT 0xffff
-
 /*
  * On MIPS I/O ports are memory mapped, so we access them using normal
  * load/store instructions. mips_io_port_base is the virtual address to
diff --git a/arch/mips/include/asm/mach-generic/spaces.h b/arch/mips/include/asm/mach-generic/spaces.h
index ee5ebe98f6cf..c3ac06a6acd2 100644
--- a/arch/mips/include/asm/mach-generic/spaces.h
+++ b/arch/mips/include/asm/mach-generic/spaces.h
@@ -14,6 +14,10 @@
 
 #include <asm/mipsregs.h>
 
+#ifndef IO_SPACE_LIMIT
+#define IO_SPACE_LIMIT 0xffff
+#endif
+
 /*
  * This gives the physical RAM offset.
  */
diff --git a/arch/mips/include/asm/mach-loongson64/spaces.h b/arch/mips/include/asm/mach-loongson64/spaces.h
index 3de0ac9d8829..ce04e998a37b 100644
--- a/arch/mips/include/asm/mach-loongson64/spaces.h
+++ b/arch/mips/include/asm/mach-loongson64/spaces.h
@@ -11,8 +11,7 @@
 #define PCI_IOSIZE	SZ_16M
 #define MAP_BASE	(PCI_IOBASE + PCI_IOSIZE)
 
-/* Reserved at the start of PCI_IOBASE for legacy drivers */
-#define MMIO_LOWER_RESERVED	0x10000
+#define IO_SPACE_LIMIT  (PCI_IOSIZE - 1)
 
 #include <asm/mach-generic/spaces.h>
 #endif
-- 
2.28.0.rc1

[PATCH v3 4/5] MIPS: Loongson64: DTS: Fix ISA range for RS780E PCH

[Jiaxun Yang]

Ranges should express the actual physical address on bus.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
 arch/mips/boot/dts/loongson/rs780e-pch.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/boot/dts/loongson/rs780e-pch.dtsi b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
index d4c803d74036..99174b52dfb8 100644
--- a/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
+++ b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
@@ -25,7 +25,7 @@ isa {
 			compatible = "isa";
 			#address-cells = <2>;
 			#size-cells = <1>;
-			ranges = <1 0 0 0 0x4000>;
+			ranges = <1 0 0 0x18000000 0x4000>;
 
 			rtc0: rtc@70 {
 				compatible = "motorola,mc146818";
-- 
2.28.0.rc1

[PATCH v3 5/5] MIPS: Loongson64: Add ISA node for LS7A PCH

[Jiaxun Yang]

Although currently we're not enabling any ISA device in devicetree,
but this node is required to express the ranges of address reserved
for ISA.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
 arch/mips/boot/dts/loongson/ls7a-pch.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
index 1c286bb8c703..e574a062dfae 100644
--- a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
+++ b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
@@ -367,5 +367,12 @@ pci_bridge@14,0 {
 				interrupt-map = <0 0 0 0 &pic 39 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
+
+		isa {
+			compatible = "isa";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <1 0 0 0x18000000 0x20000>;
+		};
 	};
 };
-- 
2.28.0.rc1

Re: [PATCH v3 2/5] MIPS: Loongson64: Process ISA Node in DeviceTree

[Huacai Chen]

For the whole series,

Tested-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Huacai Chen <chenhc@lemote.com>


On Sat, Jul 25, 2020 at 9:48 AM Jiaxun Yang <jiaxun.yang@flygoat.com> wrote:
>
> Previously, we're hardcoding resserved ISA I/O Space in code, now
> we're processing reverved I/O via DeviceTree directly. Using the ranges
> property to determine the size and address of reserved I/O space.
>
> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> --
> v2: Use range_parser instead of pci_range_parser
> ---
>  arch/mips/loongson64/init.c | 87 ++++++++++++++++++++++++++-----------
>  1 file changed, 62 insertions(+), 25 deletions(-)
>
> diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c
> index 59ddadace83f..8ba22c30f312 100644
> --- a/arch/mips/loongson64/init.c
> +++ b/arch/mips/loongson64/init.c
> @@ -7,6 +7,8 @@
>  #include <linux/irqchip.h>
>  #include <linux/logic_pio.h>
>  #include <linux/memblock.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
>  #include <asm/bootinfo.h>
>  #include <asm/traps.h>
>  #include <asm/smp-ops.h>
> @@ -63,41 +65,76 @@ void __init prom_free_prom_memory(void)
>  {
>  }
>
> -static __init void reserve_pio_range(void)
> +static int __init add_legacy_isa_io(struct fwnode_handle *fwnode, resource_size_t hw_start,
> +                                   resource_size_t size)
>  {
> +       int ret = 0;
>         struct logic_pio_hwaddr *range;
> +       unsigned long vaddr;
>
>         range = kzalloc(sizeof(*range), GFP_ATOMIC);
>         if (!range)
> -               return;
> +               return -ENOMEM;
>
> -       range->fwnode = &of_root->fwnode;
> -       range->size = MMIO_LOWER_RESERVED;
> -       range->hw_start = LOONGSON_PCIIO_BASE;
> +       range->fwnode = fwnode;
> +       range->size = size;
> +       range->hw_start = hw_start;
>         range->flags = LOGIC_PIO_CPU_MMIO;
>
> -       if (logic_pio_register_range(range)) {
> -               pr_err("Failed to reserve PIO range for legacy ISA\n");
> -               goto free_range;
> +       ret = logic_pio_register_range(range);
> +       if (ret) {
> +               kfree(range);
> +               return ret;
> +       }
> +
> +       /* Legacy ISA must placed at the start of PCI_IOBASE */
> +       if (range->io_start != 0) {
> +               logic_pio_unregister_range(range);
> +               kfree(range);
> +               return -EINVAL;
>         }
>
> -       if (WARN(range->io_start != 0,
> -                       "Reserved PIO range does not start from 0\n"))
> -               goto unregister;
> -
> -       /*
> -        * i8259 would access I/O space, so mapping must be done here.
> -        * Please remove it when all drivers can be managed by logic_pio.
> -        */
> -       ioremap_page_range(PCI_IOBASE, PCI_IOBASE + MMIO_LOWER_RESERVED,
> -                               LOONGSON_PCIIO_BASE,
> -                               pgprot_device(PAGE_KERNEL));
> -
> -       return;
> -unregister:
> -       logic_pio_unregister_range(range);
> -free_range:
> -       kfree(range);
> +       vaddr = PCI_IOBASE + range->io_start;
> +
> +       ioremap_page_range(vaddr, vaddr + size, hw_start, pgprot_device(PAGE_KERNEL));
> +
> +       return 0;
> +}
> +
> +static __init void reserve_pio_range(void)
> +{
> +       struct device_node *np;
> +
> +       for_each_node_by_name(np, "isa") {
> +               struct of_range range;
> +               struct of_range_parser parser;
> +
> +               pr_info("ISA Bridge: %pOF\n", np);
> +
> +               if (of_range_parser_init(&parser, np)) {
> +                       pr_info("Failed to parse resources.\n");
> +                       break;
> +               }
> +
> +               for_each_of_range(&parser, &range) {
> +                       switch (range.flags & IORESOURCE_TYPE_BITS) {
> +                       case IORESOURCE_IO:
> +                               pr_info(" IO 0x%016llx..0x%016llx  ->  0x%016llx\n",
> +                                       range.cpu_addr,
> +                                       range.cpu_addr + range.size - 1,
> +                                       range.bus_addr);
> +                               if (add_legacy_isa_io(&np->fwnode, range.cpu_addr, range.size))
> +                                       pr_warn("Failed to reserve legacy IO in Logic PIO\n");
> +                               break;
> +                       case IORESOURCE_MEM:
> +                               pr_info(" MEM 0x%016llx..0x%016llx  ->  0x%016llx\n",
> +                                       range.cpu_addr,
> +                                       range.cpu_addr + range.size - 1,
> +                                       range.bus_addr);
> +                               break;
> +                       }
> +               }
> +       }
>  }
>
>  void __init arch_init_irq(void)
> --
> 2.28.0.rc1
>

Re: [PATCH v3 1/5] of_address: Add bus type match for pci ranges parser

[Rob Herring]

On Fri, Jul 24, 2020 at 7:45 PM Jiaxun Yang <jiaxun.yang@flygoat.com> wrote:
>
> So the parser can be used to parse range property of ISA bus.
>
> As they're all using PCI-like method of range property, there is no need
> start a new parser.
>
> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
>
> --
> v2: Drop useless check, fix some na for bus_addr
>         add define of of_range_parser_init according to
>         Rob's suggestion.
> v3: Abstract out has_flags. simplify define.
> ---
>  drivers/of/address.c       | 29 +++++++++++++++++------------
>  include/linux/of_address.h |  4 ++++
>  2 files changed, 21 insertions(+), 12 deletions(-)

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v3 2/5] MIPS: Loongson64: Process ISA Node in DeviceTree

[WANG Xuerui]

Hi Jiaxun,


On 2020/7/25 09:45, Jiaxun Yang wrote:
> Previously, we're hardcoding resserved ISA I/O Space in code, now
"reserved"; also "in code" seems redundant (we're "hard-coding", aren't we?)
> we're processing reverved I/O via DeviceTree directly. Using the ranges
another "reserved" typo, but better restructure the whole clause.
> property to determine the size and address of reserved I/O space.
This sentence has no verb. Maybe you mean "Use"?
> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> --
> v2: Use range_parser instead of pci_range_parser
> ---
>  arch/mips/loongson64/init.c | 87 ++++++++++++++++++++++++++-----------
>  1 file changed, 62 insertions(+), 25 deletions(-)
>
> diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c
> index 59ddadace83f..8ba22c30f312 100644
> --- a/arch/mips/loongson64/init.c
> +++ b/arch/mips/loongson64/init.c
> @@ -7,6 +7,8 @@
>  #include <linux/irqchip.h>
>  #include <linux/logic_pio.h>
>  #include <linux/memblock.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
>  #include <asm/bootinfo.h>
>  #include <asm/traps.h>
>  #include <asm/smp-ops.h>
> @@ -63,41 +65,76 @@ void __init prom_free_prom_memory(void)
>  {
>  }
>  
> -static __init void reserve_pio_range(void)
> +static int __init add_legacy_isa_io(struct fwnode_handle *fwnode, resource_size_t hw_start,
> +				    resource_size_t size)
>  {
> +	int ret = 0;
>  	struct logic_pio_hwaddr *range;
> +	unsigned long vaddr;
>  
>  	range = kzalloc(sizeof(*range), GFP_ATOMIC);
>  	if (!range)
> -		return;
> +		return -ENOMEM;
>  
> -	range->fwnode = &of_root->fwnode;
> -	range->size = MMIO_LOWER_RESERVED;
> -	range->hw_start = LOONGSON_PCIIO_BASE;
> +	range->fwnode = fwnode;
> +	range->size = size;
> +	range->hw_start = hw_start;
>  	range->flags = LOGIC_PIO_CPU_MMIO;
>  
> -	if (logic_pio_register_range(range)) {
> -		pr_err("Failed to reserve PIO range for legacy ISA\n");
> -		goto free_range;
> +	ret = logic_pio_register_range(range);
> +	if (ret) {
> +		kfree(range);
> +		return ret;
> +	}
> +
> +	/* Legacy ISA must placed at the start of PCI_IOBASE */
> +	if (range->io_start != 0) {
> +		logic_pio_unregister_range(range);
> +		kfree(range);
> +		return -EINVAL;
>  	}
>  
> -	if (WARN(range->io_start != 0,
> -			"Reserved PIO range does not start from 0\n"))
> -		goto unregister;
> -
> -	/*
> -	 * i8259 would access I/O space, so mapping must be done here.
> -	 * Please remove it when all drivers can be managed by logic_pio.
> -	 */
> -	ioremap_page_range(PCI_IOBASE, PCI_IOBASE + MMIO_LOWER_RESERVED,
> -				LOONGSON_PCIIO_BASE,
> -				pgprot_device(PAGE_KERNEL));
> -
> -	return;
> -unregister:
> -	logic_pio_unregister_range(range);
> -free_range:
> -	kfree(range);
> +	vaddr = PCI_IOBASE + range->io_start;
> +
> +	ioremap_page_range(vaddr, vaddr + size, hw_start, pgprot_device(PAGE_KERNEL));
> +
> +	return 0;
> +}
> +
> +static __init void reserve_pio_range(void)
> +{
> +	struct device_node *np;
> +
> +	for_each_node_by_name(np, "isa") {
> +		struct of_range range;
> +		struct of_range_parser parser;
> +
> +		pr_info("ISA Bridge: %pOF\n", np);
> +
> +		if (of_range_parser_init(&parser, np)) {
> +			pr_info("Failed to parse resources.\n");
> +			break;
> +		}
> +
> +		for_each_of_range(&parser, &range) {
> +			switch (range.flags & IORESOURCE_TYPE_BITS) {
> +			case IORESOURCE_IO:
> +				pr_info(" IO 0x%016llx..0x%016llx  ->  0x%016llx\n",
> +					range.cpu_addr,
> +					range.cpu_addr + range.size - 1,
> +					range.bus_addr);
> +				if (add_legacy_isa_io(&np->fwnode, range.cpu_addr, range.size))
> +					pr_warn("Failed to reserve legacy IO in Logic PIO\n");
> +				break;
> +			case IORESOURCE_MEM:
> +				pr_info(" MEM 0x%016llx..0x%016llx  ->  0x%016llx\n",
> +					range.cpu_addr,
> +					range.cpu_addr + range.size - 1,
> +					range.bus_addr);
> +				break;
> +			}
> +		}
> +	}
>  }
>  
>  void __init arch_init_irq(void)

Re: [PATCH v3 1/5] of_address: Add bus type match for pci ranges parser

[Thomas Bogendoerfer]

On Mon, Jul 27, 2020 at 11:50:14AM -0600, Rob Herring wrote:
> On Fri, Jul 24, 2020 at 7:45 PM Jiaxun Yang <jiaxun.yang@flygoat.com> wrote:
> >
> > So the parser can be used to parse range property of ISA bus.
> >
> > As they're all using PCI-like method of range property, there is no need
> > start a new parser.
> >
> > Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> >
> > --
> > v2: Drop useless check, fix some na for bus_addr
> >         add define of of_range_parser_init according to
> >         Rob's suggestion.
> > v3: Abstract out has_flags. simplify define.
> > ---
> >  drivers/of/address.c       | 29 +++++++++++++++++------------
> >  include/linux/of_address.h |  4 ++++
> >  2 files changed, 21 insertions(+), 12 deletions(-)
> 
> Reviewed-by: Rob Herring <robh@kernel.org>

Rob, are you ok with merging this via the mips-next tree ?

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]

Re: [PATCH v3 1/5] of_address: Add bus type match for pci ranges parser

[Rob Herring]

On Tue, Jul 28, 2020 at 2:39 AM Thomas Bogendoerfer
<tsbogend@alpha.franken.de> wrote:
>
> On Mon, Jul 27, 2020 at 11:50:14AM -0600, Rob Herring wrote:
> > On Fri, Jul 24, 2020 at 7:45 PM Jiaxun Yang <jiaxun.yang@flygoat.com> wrote:
> > >
> > > So the parser can be used to parse range property of ISA bus.
> > >
> > > As they're all using PCI-like method of range property, there is no need
> > > start a new parser.
> > >
> > > Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> > >
> > > --
> > > v2: Drop useless check, fix some na for bus_addr
> > >         add define of of_range_parser_init according to
> > >         Rob's suggestion.
> > > v3: Abstract out has_flags. simplify define.
> > > ---
> > >  drivers/of/address.c       | 29 +++++++++++++++++------------
> > >  include/linux/of_address.h |  4 ++++
> > >  2 files changed, 21 insertions(+), 12 deletions(-)
> >
> > Reviewed-by: Rob Herring <robh@kernel.org>
>
> Rob, are you ok with merging this via the mips-next tree ?

That's my expectation hence the Reviewed-by.

Rob