From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-12.7 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY, SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9FD4FC2D0A3 for ; Fri, 6 Nov 2020 10:22:25 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 419502087E for ; Fri, 6 Nov 2020 10:22:25 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726139AbgKFKWZ (ORCPT ); Fri, 6 Nov 2020 05:22:25 -0500 Received: from mslow2.mail.gandi.net ([217.70.178.242]:39982 "EHLO mslow2.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726345AbgKFKWY (ORCPT ); Fri, 6 Nov 2020 05:22:24 -0500 Received: from relay8-d.mail.gandi.net (unknown [217.70.183.201]) by mslow2.mail.gandi.net (Postfix) with ESMTP id 657D73A5852 for ; Fri, 6 Nov 2020 10:09:31 +0000 (UTC) X-Originating-IP: 91.175.115.186 Received: from localhost (91-175-115-186.subs.proxad.net [91.175.115.186]) (Authenticated sender: gregory.clement@bootlin.com) by relay8-d.mail.gandi.net (Postfix) with ESMTPSA id C71161BF20C; Fri, 6 Nov 2020 10:09:07 +0000 (UTC) From: Gregory CLEMENT To: Alexandre Belloni , Microchip Linux Driver Support , Thomas Bogendoerfer , linux-mips@vger.kernel.org, Rob Herring , devicetree@vger.kernel.org Cc: Thomas Petazzoni , Lars Povlsen , , Gregory CLEMENT Subject: [PATCH 9/9] MIPS: mscc: Add serval support Date: Fri, 6 Nov 2020 11:08:49 +0100 Message-Id: <20201106100849.969240-11-gregory.clement@bootlin.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20201106100849.969240-1-gregory.clement@bootlin.com> References: <20201106100849.969240-1-gregory.clement@bootlin.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-mips@vger.kernel.org Add a device trees and FIT image support for the Microsemi Serval SoC which belongs to same family of the Ocelot SoC. It is based on the work of Lars Povlsen . Signed-off-by: Gregory CLEMENT Signed-off-by: Gregory CLEMENT --- arch/mips/boot/dts/mscc/Makefile | 5 +- arch/mips/boot/dts/mscc/serval.dtsi | 153 +++++++++++++++++++++ arch/mips/boot/dts/mscc/serval_common.dtsi | 127 +++++++++++++++++ arch/mips/boot/dts/mscc/serval_pcb105.dts | 17 +++ arch/mips/boot/dts/mscc/serval_pcb106.dts | 17 +++ arch/mips/generic/Kconfig | 8 ++ arch/mips/generic/Platform | 1 + arch/mips/generic/board-serval.its.S | 24 ++++ 8 files changed, 351 insertions(+), 1 deletion(-) create mode 100644 arch/mips/boot/dts/mscc/serval.dtsi create mode 100644 arch/mips/boot/dts/mscc/serval_common.dtsi create mode 100644 arch/mips/boot/dts/mscc/serval_pcb105.dts create mode 100644 arch/mips/boot/dts/mscc/serval_pcb106.dts create mode 100644 arch/mips/generic/board-serval.its.S diff --git a/arch/mips/boot/dts/mscc/Makefile b/arch/mips/boot/dts/mscc/Makefile index befda72ceb26..eeb6b7aae83b 100644 --- a/arch/mips/boot/dts/mscc/Makefile +++ b/arch/mips/boot/dts/mscc/Makefile @@ -5,6 +5,9 @@ dtb-$(CONFIG_SOC_VCOREIII) += \ jaguar2_pcb118.dtb \ luton_pcb091.dtb \ ocelot_pcb120.dtb \ - ocelot_pcb123.dtb + ocelot_pcb123.dtb \ + serval_pcb105.dtb \ + serval_pcb106.dtb + obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y)) diff --git a/arch/mips/boot/dts/mscc/serval.dtsi b/arch/mips/boot/dts/mscc/serval.dtsi new file mode 100644 index 000000000000..c357e2025d5a --- /dev/null +++ b/arch/mips/boot/dts/mscc/serval.dtsi @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mscc,serval"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "mips,mips24KEc"; + device_type = "cpu"; + clocks = <&cpu_clk>; + reg = <0>; + }; + }; + + aliases { + serial0 = &uart0; + gpio0 = &gpio; + }; + + cpuintc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + cpu_clk: cpu-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <416666666>; + }; + + ahb_clk: ahb-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&cpu_clk>; + clock-div = <2>; + clock-mult = <1>; + }; + + ahb: ahb@70000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupt-parent = <&intc>; + + cpu_ctrl: syscon@70000000 { + compatible = "mscc,ocelot-cpu-syscon", "syscon"; + reg = <0x70000000 0x2c>; + }; + + intc: interrupt-controller@70000070 { + compatible = "mscc,serval-icpu-intr"; + reg = <0x70000070 0x70>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + uart0: serial@70100000 { + pinctrl-0 = <&uart_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x70100000 0x20>; + interrupts = <6>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + uart2: serial@70100800 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x70100800 0x20>; + interrupts = <7>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + + status = "disabled"; + }; + + gpio: pinctrl@71070034 { + compatible = "mscc,serval-pinctrl"; + reg = <0x71070034 0x28>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 22>; + + sgpio_pins: sgpio-pins { + pins = "GPIO_0", "GPIO_2", "GPIO_3", "GPIO_1"; + function = "sg0"; + }; + + i2c_pins: i2c-pins { + pins = "GPIO_6", "GPIO_7"; + function = "twi"; + }; + + uart_pins: uart-pins { + pins = "GPIO_26", "GPIO_27"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + pins = "GPIO_13", "GPIO_14"; + function = "uart2"; + }; + + cs1_pins: cs1-pins { + pins = "GPIO_8"; + function = "si"; + }; + + irqext0_pins: irqext0-pins { + pins = "GPIO_28"; + function = "irq0"; + }; + + irqext1_pins: irqext1-pins { + pins = "GPIO_29"; + function = "irq1"; + }; + }; + + i2c0: i2c@70100400 { + compatible = "mscc,ocelot-i2c", "snps,designware-i2c"; + status = "disabled"; + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + reg = <0x70100400 0x100>, <0x70000190 0x8>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <8>; + clock-frequency = <100000>; + clocks = <&ahb_clk>; + }; + }; +}; diff --git a/arch/mips/boot/dts/mscc/serval_common.dtsi b/arch/mips/boot/dts/mscc/serval_common.dtsi new file mode 100644 index 000000000000..410236b6ee9b --- /dev/null +++ b/arch/mips/boot/dts/mscc/serval_common.dtsi @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microsemi Corporation + */ + +#include "serval.dtsi" + +/ { + aliases { + serial0 = &uart0; + i2c104 = &i2c104; + i2c105 = &i2c105; + i2c106 = &i2c106; + i2c107 = &i2c107; + i2c108 = &i2c108; + i2c109 = &i2c109; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&gpio { + i2c_pins: i2c-pins { + pins = "GPIO_7"; /* No "default" scl for i2c0 */ + function = "twi"; + }; + i2cmux_pins_i: i2cmux-pins-i { + pins = "GPIO_11", "GPIO_12", "GPIO_18", "GPIO_19", + "GPIO_20", "GPIO_21"; + function = "twi_scl_m"; + output-low; + }; + i2cmux_0: i2cmux-0 { + pins = "GPIO_11"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_1: i2cmux-1 { + pins = "GPIO_12"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_2: i2cmux-2 { + pins = "GPIO_18"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_3: i2cmux-3 { + pins = "GPIO_19"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_4: i2cmux-4 { + pins = "GPIO_20"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_5: i2cmux-5 { + pins = "GPIO_21"; + function = "twi_scl_m"; + output-high; + }; +}; + +&i2c0 { + status = "okay"; + i2c-sda-hold-time-ns = <300>; +}; + +&ahb { + i2c0_imux: i2c0-imux@0 { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + pinctrl-names = + "i2c104", "i2c105", "i2c106", "i2c107", + "i2c108", "i2c109", "idle"; + pinctrl-0 = <&i2cmux_0>; + pinctrl-1 = <&i2cmux_1>; + pinctrl-2 = <&i2cmux_2>; + pinctrl-3 = <&i2cmux_3>; + pinctrl-4 = <&i2cmux_4>; + pinctrl-5 = <&i2cmux_5>; + pinctrl-6 = <&i2cmux_pins_i>; + i2c104: i2c_sfp0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c105: i2c_sfp1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c106: i2c_sfp2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c107: i2c_sfp3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c108: i2c_sfp4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c109: i2c_sfp5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; diff --git a/arch/mips/boot/dts/mscc/serval_pcb105.dts b/arch/mips/boot/dts/mscc/serval_pcb105.dts new file mode 100644 index 000000000000..a1b0012b79d3 --- /dev/null +++ b/arch/mips/boot/dts/mscc/serval_pcb105.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +/dts-v1/; +#include "serval_common.dtsi" + +/ { + model = "Serval PCB105 Reference Board"; + compatible = "mscc,serval-pcb105", "mscc,serval"; + + aliases { + }; + +}; + diff --git a/arch/mips/boot/dts/mscc/serval_pcb106.dts b/arch/mips/boot/dts/mscc/serval_pcb106.dts new file mode 100644 index 000000000000..237be7c8da57 --- /dev/null +++ b/arch/mips/boot/dts/mscc/serval_pcb106.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +/dts-v1/; +#include "serval_common.dtsi" + +/ { + model = "Serval PCB106 Reference Board"; + compatible = "mscc,serval-pcb106", "mscc,serval"; + + aliases { + }; + +}; + diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig index c7a840b8eaa6..657dd93c5e76 100644 --- a/arch/mips/generic/Kconfig +++ b/arch/mips/generic/Kconfig @@ -94,6 +94,14 @@ config FIT_IMAGE_FDT_JAGUAR2 from Microsemi in the FIT kernel image. This requires u-boot on the platform. +config FIT_IMAGE_FDT_SERVAL + bool "Include FDT for Microsemi Serval development platforms" + select SOC_VCOREIII + help + Enable this to include the FDT for the Serval development platforms + from Microsemi in the FIT kernel image. + This requires u-boot on the platform. + config BOARD_INGENIC bool "Support boards based on Ingenic SoCs" select MACH_INGENIC_GENERIC diff --git a/arch/mips/generic/Platform b/arch/mips/generic/Platform index 3f2055bea596..b871af16b5b6 100644 --- a/arch/mips/generic/Platform +++ b/arch/mips/generic/Platform @@ -22,4 +22,5 @@ its-$(CONFIG_FIT_IMAGE_FDT_NI169445) += board-ni169445.its.S its-$(CONFIG_FIT_IMAGE_FDT_OCELOT) += board-ocelot.its.S its-$(CONFIG_FIT_IMAGE_FDT_LUTON) += board-luton.its.S its-$(CONFIG_FIT_IMAGE_FDT_JAGUAR2) += board-jaguar2.its.S +its-$(CONFIG_FIT_IMAGE_FDT_SERVAL) += board-serval.its.S its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += board-xilfpga.its.S diff --git a/arch/mips/generic/board-serval.its.S b/arch/mips/generic/board-serval.its.S new file mode 100644 index 000000000000..4ea4fc9d757f --- /dev/null +++ b/arch/mips/generic/board-serval.its.S @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/ { + images { + fdt@serval_pcb105 { + description = "MSCC Serval PCB105 Device Tree"; + data = /incbin/("boot/dts/mscc/serval_pcb105.dtb"); + type = "flat_dt"; + arch = "mips"; + compression = "none"; + hash@0 { + algo = "sha1"; + }; + }; + }; + + configurations { + pcb105 { + description = "Serval Linux kernel"; + kernel = "kernel@0"; + fdt = "fdt@serval_pcb105"; + ramdisk = "ramdisk"; + }; + }; +}; -- 2.28.0