From: Bert Vermeulen <bert@biot.com>
To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Rob Herring <robh+dt@kernel.org>,
linux-mips@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Sander Vanheule <sander@svanheule.net>,
John Crispin <john@phrozen.org>,
Birger Koblitz <mail@birger-koblitz.de>
Cc: Bert Vermeulen <bert@biot.com>
Subject: [PATCH v4 0/5] Add support for Realtek RTL838x/RTL839x switch SoCs
Date: Tue, 19 Jan 2021 10:21:04 +0100 [thread overview]
Message-ID: <20210119092109.185282-1-bert@biot.com> (raw)
v4:
- Device tree bindings for SoC in separate patch.
- Removed ioremap.h, and declare physical address bases in device tree.
v3:
- all code removed, the base system is now only device tree files and docs
and some build config.
- ioremap.h restored to the v1 version, with hardcoded I/O ranges, since I
got flak on changing that as suggested. This brings it in line with other
systems in arch/mips/generic.
v2:
- Removed all new arch/mips/ code, using arch/mips/generic/ instead.
- Use device tree ranges instead of hardcoded addresses for ioremap.
- Moved IRQ driver to drivers/irqchip/
- Removed reset handling code, will be replaced by device tree config.
- All SoC family id code moved to new soc driver.
- Header moved to realtek/ instead of mach-realtek/
- As more of the base system now depends on device tree, a sample
dts for the Cisco SG220-26 switch is included. This will be further
filled out, and bindings documented, as drivers get merged.
Bert Vermeulen (5):
dt-bindings: mips: Add support for RTL83xx SoC series
Add support for Realtek RTL838x/RTL839x switch SoCs
MIPS: Add Realtek RTL838x/RTL839x support as generic MIPS system
dt-bindings: Add Cisco prefix to vendor list
mips: dts: Add support for Cisco SG220-26 switch
.../devicetree/bindings/mips/realtek-rtl.yaml | 24 ++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/mips/Kconfig | 31 ++++++++++
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/realtek/Makefile | 2 +
arch/mips/boot/dts/realtek/cisco_sg220-26.dts | 25 ++++++++
arch/mips/boot/dts/realtek/rtl838x.dtsi | 21 +++++++
arch/mips/boot/dts/realtek/rtl83xx.dtsi | 59 +++++++++++++++++++
8 files changed, 165 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mips/realtek-rtl.yaml
create mode 100644 arch/mips/boot/dts/realtek/Makefile
create mode 100644 arch/mips/boot/dts/realtek/cisco_sg220-26.dts
create mode 100644 arch/mips/boot/dts/realtek/rtl838x.dtsi
create mode 100644 arch/mips/boot/dts/realtek/rtl83xx.dtsi
--
2.25.1
next reply other threads:[~2021-01-19 14:21 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-19 9:21 Bert Vermeulen [this message]
2021-01-19 9:21 ` [PATCH v4 1/5] dt-bindings: mips: Add support for RTL83xx SoC series Bert Vermeulen
2021-01-19 9:21 ` [PATCH v4 2/5] Add support for Realtek RTL838x/RTL839x switch SoCs Bert Vermeulen
2021-01-19 9:21 ` [PATCH v4 3/5] MIPS: Add Realtek RTL838x/RTL839x support as generic MIPS system Bert Vermeulen
2021-01-19 9:21 ` [PATCH v4 4/5] dt-bindings: Add Cisco prefix to vendor list Bert Vermeulen
2021-01-20 15:50 ` Rob Herring
2021-01-19 9:21 ` [PATCH v4 5/5] mips: dts: Add support for Cisco SG220-26 switch Bert Vermeulen
2021-02-04 20:59 ` Thomas Bogendoerfer
2021-02-04 20:57 ` [PATCH v4 0/5] Add support for Realtek RTL838x/RTL839x switch SoCs Thomas Bogendoerfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210119092109.185282-1-bert@biot.com \
--to=bert@biot.com \
--cc=devicetree@vger.kernel.org \
--cc=john@phrozen.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=mail@birger-koblitz.de \
--cc=robh+dt@kernel.org \
--cc=sander@svanheule.net \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).