From: "Arınç ÜNAL" <arinc.unal@arinc9.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Sean Wang <sean.wang@mediatek.com>,
Landen Chao <Landen.Chao@mediatek.com>,
DENG Qingfang <dqfext@gmail.com>,
Sergio Paracuellos <sergio.paracuellos@gmail.com>,
erkin.bozoglu@xeront.com
Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-mips@vger.kernel.org, "Arınç ÜNAL" <arinc.unal@arinc9.com>,
"Rob Herring" <robh@kernel.org>
Subject: [PATCH v4 net-next 01/10] dt-bindings: net: drop old mediatek bindings
Date: Tue, 20 Sep 2022 20:25:47 +0300 [thread overview]
Message-ID: <20220920172556.16557-2-arinc.unal@arinc9.com> (raw)
In-Reply-To: <20220920172556.16557-1-arinc.unal@arinc9.com>
Remove these old mediatek bindings which are not used.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../bindings/net/mediatek,mt7620-gsw.txt | 24 --------
.../bindings/net/ralink,rt2880-net.txt | 59 -------------------
.../bindings/net/ralink,rt3050-esw.txt | 30 ----------
3 files changed, 113 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
delete mode 100644 Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
delete mode 100644 Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
diff --git a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
deleted file mode 100644
index 358fed2fab43..000000000000
--- a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Mediatek Gigabit Switch
-=======================
-
-The mediatek gigabit switch can be found on Mediatek SoCs (mt7620, mt7621).
-
-Required properties:
-- compatible: Should be "mediatek,mt7620-gsw" or "mediatek,mt7621-gsw"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the gigabit switches interrupt
-- resets: Should contain the gigabit switches resets
-- reset-names: Should contain the reset names "gsw"
-
-Example:
-
-gsw@10110000 {
- compatible = "ralink,mt7620-gsw";
- reg = <0x10110000 8000>;
-
- resets = <&rstctrl 23>;
- reset-names = "gsw";
-
- interrupt-parent = <&intc>;
- interrupts = <17>;
-};
diff --git a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
deleted file mode 100644
index 9fe1a0a22e44..000000000000
--- a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Ralink Frame Engine Ethernet controller
-=======================================
-
-The Ralink frame engine ethernet controller can be found on Ralink and
-Mediatek SoCs (RT288x, RT3x5x, RT366x, RT388x, rt5350, mt7620, mt7621, mt76x8).
-
-Depending on the SoC, there is a number of ports connected to the CPU port
-directly and/or via a (gigabit-)switch.
-
-* Ethernet controller node
-
-Required properties:
-- compatible: Should be one of "ralink,rt2880-eth", "ralink,rt3050-eth",
- "ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth",
- "mediatek,mt7620-eth", "mediatek,mt7621-eth"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the frame engines interrupt
-- resets: Should contain the frame engines resets
-- reset-names: Should contain the reset names "fe". If a switch is present
- "esw" is also required.
-
-
-* Ethernet port node
-
-Required properties:
-- compatible: Should be "ralink,eth-port"
-- reg: The number of the physical port
-- phy-handle: reference to the node describing the phy
-
-Example:
-
-mdio-bus {
- ...
- phy0: ethernet-phy@0 {
- phy-mode = "mii";
- reg = <0>;
- };
-};
-
-ethernet@400000 {
- compatible = "ralink,rt2880-eth";
- reg = <0x00400000 10000>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- resets = <&rstctrl 18>;
- reset-names = "fe";
-
- interrupt-parent = <&cpuintc>;
- interrupts = <5>;
-
- port@0 {
- compatible = "ralink,eth-port";
- reg = <0>;
- phy-handle = <&phy0>;
- };
-
-};
diff --git a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
deleted file mode 100644
index 87e315856efa..000000000000
--- a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Ralink Fast Ethernet Embedded Switch
-====================================
-
-The ralink fast ethernet embedded switch can be found on Ralink and Mediatek
-SoCs (RT3x5x, RT5350, MT76x8).
-
-Required properties:
-- compatible: Should be "ralink,rt3050-esw"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the embedded switches interrupt
-- resets: Should contain the embedded switches resets
-- reset-names: Should contain the reset names "esw"
-
-Optional properties:
-- ralink,portmap: can be used to choose if the default switch setup is
- llllw or wllll
-- ralink,led_polarity: override the active high/low settings of the leds
-
-Example:
-
-esw@10110000 {
- compatible = "ralink,rt3050-esw";
- reg = <0x10110000 8000>;
-
- resets = <&rstctrl 23>;
- reset-names = "esw";
-
- interrupt-parent = <&intc>;
- interrupts = <17>;
-};
--
2.34.1
next prev parent reply other threads:[~2022-09-20 17:27 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-20 17:25 [PATCH v4 net-next 00/10] dt-bindings and mt7621 devicetree changes Arınç ÜNAL
2022-09-20 17:25 ` Arınç ÜNAL [this message]
2022-09-20 17:25 ` [PATCH v4 net-next 02/10] dt-bindings: net: dsa: mediatek,mt7530: change mt7530 switch address Arınç ÜNAL
2022-09-20 17:25 ` [PATCH v4 net-next 03/10] dt-bindings: net: dsa: mediatek,mt7530: expand gpio-controller description Arınç ÜNAL
2022-09-20 17:25 ` [PATCH v4 net-next 04/10] dt-bindings: memory: mt7621: add syscon as compatible string Arınç ÜNAL
2022-09-20 17:25 ` [PATCH v4 net-next 05/10] mips: dts: ralink: mt7621: fix some dtc warnings Arınç ÜNAL
2022-09-20 17:25 ` [PATCH v4 net-next 06/10] mips: dts: ralink: mt7621: remove interrupt-parent from switch node Arınç ÜNAL
2022-09-20 17:25 ` [PATCH v4 net-next 07/10] mips: dts: ralink: mt7621: change phy-mode of gmac1 to rgmii Arınç ÜNAL
2022-09-20 17:25 ` [PATCH v4 net-next 08/10] mips: dts: ralink: mt7621: change mt7530 switch address Arınç ÜNAL
2022-09-20 17:25 ` [PATCH v4 net-next 09/10] mips: dts: ralink: mt7621: fix external phy on GB-PC2 Arınç ÜNAL
2022-09-20 17:25 ` [PATCH v4 net-next 10/10] mips: dts: ralink: mt7621: add GB-PC2 LEDs Arınç ÜNAL
2022-09-23 10:10 ` [PATCH v4 net-next 00/10] dt-bindings and mt7621 devicetree changes patchwork-bot+netdevbpf
2022-09-23 13:02 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220920172556.16557-2-arinc.unal@arinc9.com \
--to=arinc.unal@arinc9.com \
--cc=Landen.Chao@mediatek.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dqfext@gmail.com \
--cc=edumazet@google.com \
--cc=erkin.bozoglu@xeront.com \
--cc=f.fainelli@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-mips@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=sergio.paracuellos@gmail.com \
--cc=tsbogend@alpha.franken.de \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).