Am 22.02.19 um 10:57 schrieb rosysong@rosinson.com: > Thanks for your reply, I see your SoC is AR9331 which supported by u-boot-master either, and your bootloader is  > barebox-2019. Maybe you can build a u-boot-master image for your AR9331 machine and you will know what happen!!! :-) > My BSP is openwrt-18.06 https://github.com/openwrt/openwrt. qca953x SoC. Sorry, I don't use u-boot and have no time to debug it. My primer interests are barebox and mainlining of ath79 related patches from OpenWRT to the kernel. > Am 22.02.19 um 03:35 schrieb rosysong@rosinson.com:> Hi all, >>      My kernel version is linux-4.9.158, it hangs when replace the old u-boot(1.1.4) with > u-boot-master. >>      For linux-4.14.xx, When I enable CONFIG_MIPSR2_IRQ_VI options, it does hang any longer while > still hang in linux-4.9.158. >>      Sometimes it hangs at "random: crng init done". >> >>      Any hints will be appreciated!!! Thanks > It is hard to answer your questions. Many parts play with each other. ASo far I have following > questions: > - why do you change boot loader? > - why do you use old kernels? > - why you do not use devicetree? > - what is your memory layout? Where is loaded u-boot and where should be loaded kernel. Is kernel > compressed? Where it will be extracted? >   > Here is boot log on my system: > barebox 2019.01.0-00526-gdd4b47ab1b #346 Mon Feb 18 08:42:48 CET 2019 >   > Board: DPTechnics DPT-Module > mdio_bus: miibus0: probed > ag71xx-gmac 18070000.mac@19000000.of: network device registered > m25p80 w25q128@00: w25q128 (16384 Kbytes) > netconsole: registered as netconsole-1 > malloc space: 0x83ba0000 -> 0x83f9ffff (size 4 MiB) > eth0: got preset MAC address: c4:93:00:00:ae:89 > running /env/bin/init... >   > Hit any key to stop autoboot:    0 > Booting entry 'net' > eth0: DHCP client bound to address 192.168.25.20 >   > Loading ELF '/mnt/tftp/ore-linux-dpt-module' > Loading devicetree from '/mnt/tftp/ore-oftree-dpt-module' > Starting application at 0x806e0000, dts 0x83bd6120... > [    0.000000] Linux version 5.0.0-rc1+ (ptxdist@ptxdist) (gcc version 8.2.1 20181130 (OSELAS.Toolch$ > in-2018.12.0 8-20181130)) #644 2019-01-11T13:10:06+00:00 > [    0.000000] printk: bootconsole [early0] enabled > [    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) > [    0.000000] MIPS: machine is DPTechnics DPT-Module > [    0.000000] SoC: Atheros AR9330 rev 1 > [    0.000000] Determined physical RAM map: > [    0.000000]  memory: 04000000 @ 80000000 (usable) > [    0.000000]  memory: 04000000 @ 00000000 (usable) > [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. > [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes > [    0.000000] Zone ranges: > [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff] > [    0.000000] Movable zone start for each node > [    0.000000] Early memory node ranges > [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff] > [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] > [    0.000000] random: get_random_bytes called from start_kernel+0xc4/0x52c with crng_init=0 > [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256 > [    0.000000] Kernel command line:   ip=dhcp root=/dev/nfs nfsroot=192.168.23.4:/home/ore/nfsroot/d$ > t-module,v3,tcp > [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > [    0.000000] Writing ErrCtl register=00000000 > [    0.000000] Readback ErrCtl register=00000000 > [    0.000000] Memory: 56624K/65536K available (4883K kernel code, 398K rwdata, 960K rodata, 1432K i$ > it, 213K bss, 8912K reserved, 0K cma-reserved) > [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > [    0.000000] ftrace: allocating 17594 entries in 35 pages > [    0.000000] NR_IRQS: 51 > [    0.000000] CPU clock: 400.000 MHz > [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 n$ > [    0.000014] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns > [    0.007915] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) > [    0.007915] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) > [    0.092710] pid_max: default: 32768 minimum: 301 > [    0.097631] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) > [    0.103958] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) > [    0.114890] devtmpfs: initialized > [    0.120178] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446 > 2750000 ns > [    0.128639] futex hash table entries: 256 (order: -1, 3072 bytes) > [    0.134860] pinctrl core: initialized pinctrl subsystem > [    0.141450] NET: Registered protocol family 16 > [    0.222120] clocksource: Switched to clocksource MIPS > [    2.172295] NET: Registered protocol family 2 > [    2.176493] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) > [    2.182985] TCP established hash table entries: 1024 (order: 0, 4096 bytes) > [    2.189826] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) > [    2.196188] TCP: Hash tables configured (established 1024 bind 1024) > [    2.202754] UDP hash table entries: 256 (order: 0, 4096 bytes) > [    2.208341] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) > [    2.215083] NET: Registered protocol family 1 > [    2.221613] RPC: Registered named UNIX socket transport module. > [    2.226175] RPC: Registered udp transport module. > [    2.230768] RPC: Registered tcp transport module. > [    2.235487] RPC: Registered tcp NFSv4.1 backchannel transport module. > [    2.245537] workingset: timestamp_bits=30 max_order=14 bucket_order=0 > [    2.261046] squashfs: version 4.0 (2009/01/31) Phillip Lougher > [    2.282255] NFS: Registering the id_resolver key type > [    2.285902] Key type id_resolver registered > [    2.290024] Key type id_legacy registered > [    2.294098] nfs4filelayout_init: NFSv4 File Layout Driver Registering... > [    2.300768] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc. > [    2.313723] pinctrl-single 18040028.pinmux: 64 pins, size 8 > [    2.323909] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled > [    2.331142] 18020000.uart: ttyATH0 at MMIO 0x18020000 (irq = 8, base_baud = 1562500) is a AR933X U > ART > [    2.339446] printk: console [ttyATH0] enabled > [    2.339446] printk: console [ttyATH0] enabled > [    2.347627] printk: bootconsole [early0] disabled > [    2.347627] printk: bootconsole [early0] disabled > [    2.363728] m25p80 spi0.0: w25q128 (16384 Kbytes) > [    2.367039] 4 fixed-partitions partitions found on MTD device spi0.0 > [    2.373438] Creating 4 MTD partitions on "spi0.0": > [    2.378121] 0x000000020000-0x0000003e0000 : "firmware" > [    2.386127] 0x000000000000-0x000000080000 : "barebox" > [    2.393122] 0x000000080000-0x000000090000 : "barebox-environment" > [    2.401065] 0x0000007f0000-0x000000800000 : "art" > [    2.408770] libphy: Fixed MDIO Bus: probed > [    2.562114] random: fast init done > [    2.742683] libphy: ag71xx_mdio: probed > [    3.032223] mdio-bus.0:1f: Found an AR7240/AR9330 built-in switch > [    3.037170] libphy: ar7240sw_mdio: probed > [    3.086221] ag71xx 19000000.eth: invalid MAC address, using random address > [    3.423862] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:1f:04 [uid=004dd041, driver=Generi > c PHY] > [    3.433094] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII > [    3.440646] NET: Registered protocol family 10 >   > [    3.449822] Segment Routing with IPv6 > [    3.452310] NET: Registered protocol family 17 > [    3.457295] 8021q: 802.1Q VLAN Support v1.8 > [    3.460718] Key type dns_resolver registered > [    3.470181] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [    5.533865] eth0: link up (100Mbps/Full duplex) > [    5.542180] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [    5.572256] Sending DHCP requests ., OK > [    6.674525] IP-Config: Got DHCP answer from 192.168.23.4, my address is 192.168.25.152 > [    6.682442] IP-Config: Complete: > [    6.685640]      device=eth0, hwaddr=5a:8e:98:5e:67:91, ipaddr=192.168.25.152, mask=255.255.0.0, g > w=192.168.23.254 > [    6.695986]      host=192.168.25.152, domain=lab.pengutronix.de, nis-domain=(none) > [    6.703544]      bootserver=192.168.23.4, rootserver=192.168.23.4, rootpath= > [    6.703554]      nameserver0=192.168.23.254 > [    6.714748]      ntpserver0=192.168.23.4 > [    6.747124] VFS: Mounted root (nfs filesystem) readonly on device 0:12. > [    6.753709] devtmpfs: mounted > [    6.784596] Freeing unused kernel memory: 1432K > [    6.787677] This architecture does not have kernel memory protection. > [    6.794147] Run /sbin/init as init process > [    7.376070] systemd[1]: System time before build time, advancing clock. > [    7.500128] systemd[1]: Failed to insert module 'autofs4': No such file or directory > [    7.622546] systemd[1]: systemd 239 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR - > SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -I > DN2 -IDN -PCRE2 default-hierarchy=hybrid) > [    7.643950] systemd[1]: Detected architecture mips. >   > Welcome to PTXdist / Pengutronix-Freifunk! >   > [    7.715905] systemd[1]: Set hostname to . >   > -- > Regards, > Oleksij >   > >   > From: Oleksij Rempel > Date: 2019-02-22 17:06 > To: rosysong@rosinson.com; linux-mips > Subject: Re: Kernel hang when replace older uboot with uboot master for ath79 mips platform > Hi, >   > Am 22.02.19 um 03:35 schrieb rosysong@rosinson.com:> Hi all, >>      My kernel version is linux-4.9.158, it hangs when replace the old u-boot(1.1.4) with > u-boot-master. >>      For linux-4.14.xx, When I enable CONFIG_MIPSR2_IRQ_VI options, it does hang any longer while > still hang in linux-4.9.158. >>      Sometimes it hangs at "random: crng init done". >> >>      Any hints will be appreciated!!! Thanks > It is hard to answer your questions. Many parts play with each other. ASo far I have following > questions: > - why do you change boot loader? > - why do you use old kernels? > - why you do not use devicetree? > - what is your memory layout? Where is loaded u-boot and where should be loaded kernel. Is kernel > compressed? Where it will be extracted? >   > Here is boot log on my system: > barebox 2019.01.0-00526-gdd4b47ab1b #346 Mon Feb 18 08:42:48 CET 2019 >   > Board: DPTechnics DPT-Module > mdio_bus: miibus0: probed > ag71xx-gmac 18070000.mac@19000000.of: network device registered > m25p80 w25q128@00: w25q128 (16384 Kbytes) > netconsole: registered as netconsole-1 > malloc space: 0x83ba0000 -> 0x83f9ffff (size 4 MiB) > eth0: got preset MAC address: c4:93:00:00:ae:89 > running /env/bin/init... >   > Hit any key to stop autoboot:    0 > Booting entry 'net' > eth0: DHCP client bound to address 192.168.25.20 >   > Loading ELF '/mnt/tftp/ore-linux-dpt-module' > Loading devicetree from '/mnt/tftp/ore-oftree-dpt-module' > Starting application at 0x806e0000, dts 0x83bd6120... > [    0.000000] Linux version 5.0.0-rc1+ (ptxdist@ptxdist) (gcc version 8.2.1 20181130 (OSELAS.Toolch$ > in-2018.12.0 8-20181130)) #644 2019-01-11T13:10:06+00:00 > [    0.000000] printk: bootconsole [early0] enabled > [    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) > [    0.000000] MIPS: machine is DPTechnics DPT-Module > [    0.000000] SoC: Atheros AR9330 rev 1 > [    0.000000] Determined physical RAM map: > [    0.000000]  memory: 04000000 @ 80000000 (usable) > [    0.000000]  memory: 04000000 @ 00000000 (usable) > [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. > [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes > [    0.000000] Zone ranges: > [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff] > [    0.000000] Movable zone start for each node > [    0.000000] Early memory node ranges > [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff] > [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] > [    0.000000] random: get_random_bytes called from start_kernel+0xc4/0x52c with crng_init=0 > [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256 > [    0.000000] Kernel command line:   ip=dhcp root=/dev/nfs nfsroot=192.168.23.4:/home/ore/nfsroot/d$ > t-module,v3,tcp > [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > [    0.000000] Writing ErrCtl register=00000000 > [    0.000000] Readback ErrCtl register=00000000 > [    0.000000] Memory: 56624K/65536K available (4883K kernel code, 398K rwdata, 960K rodata, 1432K i$ > it, 213K bss, 8912K reserved, 0K cma-reserved) > [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > [    0.000000] ftrace: allocating 17594 entries in 35 pages > [    0.000000] NR_IRQS: 51 > [    0.000000] CPU clock: 400.000 MHz > [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 n$ > [    0.000014] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns > [    0.007915] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) > [    0.007915] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) > [    0.092710] pid_max: default: 32768 minimum: 301 > [    0.097631] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) > [    0.103958] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) > [    0.114890] devtmpfs: initialized > [    0.120178] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446 > 2750000 ns > [    0.128639] futex hash table entries: 256 (order: -1, 3072 bytes) > [    0.134860] pinctrl core: initialized pinctrl subsystem > [    0.141450] NET: Registered protocol family 16 > [    0.222120] clocksource: Switched to clocksource MIPS > [    2.172295] NET: Registered protocol family 2 > [    2.176493] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) > [    2.182985] TCP established hash table entries: 1024 (order: 0, 4096 bytes) > [    2.189826] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) > [    2.196188] TCP: Hash tables configured (established 1024 bind 1024) > [    2.202754] UDP hash table entries: 256 (order: 0, 4096 bytes) > [    2.208341] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) > [    2.215083] NET: Registered protocol family 1 > [    2.221613] RPC: Registered named UNIX socket transport module. > [    2.226175] RPC: Registered udp transport module. > [    2.230768] RPC: Registered tcp transport module. > [    2.235487] RPC: Registered tcp NFSv4.1 backchannel transport module. > [    2.245537] workingset: timestamp_bits=30 max_order=14 bucket_order=0 > [    2.261046] squashfs: version 4.0 (2009/01/31) Phillip Lougher > [    2.282255] NFS: Registering the id_resolver key type > [    2.285902] Key type id_resolver registered > [    2.290024] Key type id_legacy registered > [    2.294098] nfs4filelayout_init: NFSv4 File Layout Driver Registering... > [    2.300768] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc. > [    2.313723] pinctrl-single 18040028.pinmux: 64 pins, size 8 > [    2.323909] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled > [    2.331142] 18020000.uart: ttyATH0 at MMIO 0x18020000 (irq = 8, base_baud = 1562500) is a AR933X U > ART > [    2.339446] printk: console [ttyATH0] enabled > [    2.339446] printk: console [ttyATH0] enabled > [    2.347627] printk: bootconsole [early0] disabled > [    2.347627] printk: bootconsole [early0] disabled > [    2.363728] m25p80 spi0.0: w25q128 (16384 Kbytes) > [    2.367039] 4 fixed-partitions partitions found on MTD device spi0.0 > [    2.373438] Creating 4 MTD partitions on "spi0.0": > [    2.378121] 0x000000020000-0x0000003e0000 : "firmware" > [    2.386127] 0x000000000000-0x000000080000 : "barebox" > [    2.393122] 0x000000080000-0x000000090000 : "barebox-environment" > [    2.401065] 0x0000007f0000-0x000000800000 : "art" > [    2.408770] libphy: Fixed MDIO Bus: probed > [    2.562114] random: fast init done > [    2.742683] libphy: ag71xx_mdio: probed > [    3.032223] mdio-bus.0:1f: Found an AR7240/AR9330 built-in switch > [    3.037170] libphy: ar7240sw_mdio: probed > [    3.086221] ag71xx 19000000.eth: invalid MAC address, using random address > [    3.423862] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:1f:04 [uid=004dd041, driver=Generi > c PHY] > [    3.433094] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII > [    3.440646] NET: Registered protocol family 10 >   > [    3.449822] Segment Routing with IPv6 > [    3.452310] NET: Registered protocol family 17 > [    3.457295] 8021q: 802.1Q VLAN Support v1.8 > [    3.460718] Key type dns_resolver registered > [    3.470181] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [    5.533865] eth0: link up (100Mbps/Full duplex) > [    5.542180] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [    5.572256] Sending DHCP requests ., OK > [    6.674525] IP-Config: Got DHCP answer from 192.168.23.4, my address is 192.168.25.152 > [    6.682442] IP-Config: Complete: > [    6.685640]      device=eth0, hwaddr=5a:8e:98:5e:67:91, ipaddr=192.168.25.152, mask=255.255.0.0, g > w=192.168.23.254 > [    6.695986]      host=192.168.25.152, domain=lab.pengutronix.de, nis-domain=(none) > [    6.703544]      bootserver=192.168.23.4, rootserver=192.168.23.4, rootpath= > [    6.703554]      nameserver0=192.168.23.254 > [    6.714748]      ntpserver0=192.168.23.4 > [    6.747124] VFS: Mounted root (nfs filesystem) readonly on device 0:12. > [    6.753709] devtmpfs: mounted > [    6.784596] Freeing unused kernel memory: 1432K > [    6.787677] This architecture does not have kernel memory protection. > [    6.794147] Run /sbin/init as init process > [    7.376070] systemd[1]: System time before build time, advancing clock. > [    7.500128] systemd[1]: Failed to insert module 'autofs4': No such file or directory > [    7.622546] systemd[1]: systemd 239 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR - > SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -I > DN2 -IDN -PCRE2 default-hierarchy=hybrid) > [    7.643950] systemd[1]: Detected architecture mips. >   > Welcome to PTXdist / Pengutronix-Freifunk! >   > [    7.715905] systemd[1]: Set hostname to . >   > -- > Regards, > Oleksij >   > -- Regards, Oleksij