[PATCH 6/6] MIPS: OCTEON: Remove redundant enable of RP error reporting

[Naveen Naidu <naveennaidu479@gmail.com>]

e8635b484f64 ("MIPS: Add Cavium OCTEON PCI support.") added MIPS
specific code to enable PCIe and AER error reporting (*irrespective
of CONFIG_PCIEAER value*) because PCI core didn't do that at the time.

Currently when CONFIG_PCIEAER=y, root port's error reporting is
enabled by aer_enable_rootport() in the aer_probe() path.

It is now no longer necessary for Octeon code to enable RP's error
reporting since it's done when PCIe bus loads the AER service driver.

Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
---
 arch/mips/pci/pci-octeon.c | 18 ------------------
 1 file changed, 18 deletions(-)

diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index b973fc464c21..239eec8ac942 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -114,24 +114,6 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
 	}
 
-	/* Find the Advanced Error Reporting capability */
-	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
-	if (pos) {
-		/*
-		 * Leave severity at HW default. This only controls if
-		 * errors are reported as uncorrectable or
-		 * correctable, not if the error is reported.
-		 */
-		/* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
-
-		/* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
-		/* Report all errors to the root complex */
-		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
-				       PCI_ERR_ROOT_CMD_COR_EN |
-				       PCI_ERR_ROOT_CMD_NONFATAL_EN |
-				       PCI_ERR_ROOT_CMD_FATAL_EN);
-	}
-
 	return 0;
 }
 
-- 
2.25.1