linux-mips.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] Ingenic: iio/adc: add JZ4760(B) support to the
@ 2021-07-21 10:53 citral23
  2021-07-21 10:53 ` [PATCH 1/6] iio/adc: ingenic: rename has_aux2 to has_aux_md citral23
                   ` (5 more replies)
  0 siblings, 6 replies; 29+ messages in thread
From: citral23 @ 2021-07-21 10:53 UTC (permalink / raw)
  To: paul
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact

This is a set of patches to add support for the JZ4760(B) socs
to ingenic-sadc, those socs have 3 aux channels, and the JZ4760B
has an extra register to set the battery divider as internal or 
external.



^ permalink raw reply	[flat|nested] 29+ messages in thread

* [PATCH 1/6] iio/adc: ingenic: rename has_aux2 to has_aux_md
  2021-07-21 10:53 [PATCH] Ingenic: iio/adc: add JZ4760(B) support to the citral23
@ 2021-07-21 10:53 ` citral23
  2021-07-21 17:46   ` Paul Cercueil
  2021-07-21 10:53 ` [PATCH 2/6] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry citral23
                   ` (4 subsequent siblings)
  5 siblings, 1 reply; 29+ messages in thread
From: citral23 @ 2021-07-21 10:53 UTC (permalink / raw)
  To: paul
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact, citral23

The purpose of this property is to set the AUX_MD bits if true, no to describe the hardware.
Rename it to a more appropriate name.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
---
 drivers/iio/adc/ingenic-adc.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
index 34c03a264f74..40f2d8c2cf72 100644
--- a/drivers/iio/adc/ingenic-adc.c
+++ b/drivers/iio/adc/ingenic-adc.c
@@ -92,7 +92,7 @@ struct ingenic_adc_soc_data {
 	const int *battery_scale_avail;
 	size_t battery_scale_avail_size;
 	unsigned int battery_vref_mode: 1;
-	unsigned int has_aux2: 1;
+	unsigned int has_aux_md: 1;
 	const struct iio_chan_spec *channels;
 	unsigned int num_channels;
 	int (*init_clk_div)(struct device *dev, struct ingenic_adc *adc);
@@ -506,7 +506,7 @@ static const struct ingenic_adc_soc_data jz4725b_adc_soc_data = {
 	.battery_scale_avail = jz4725b_adc_battery_scale_avail,
 	.battery_scale_avail_size = ARRAY_SIZE(jz4725b_adc_battery_scale_avail),
 	.battery_vref_mode = true,
-	.has_aux2 = false,
+	.has_aux_md = false,
 	.channels = jz4740_channels,
 	.num_channels = ARRAY_SIZE(jz4740_channels),
 	.init_clk_div = jz4725b_adc_init_clk_div,
@@ -520,7 +520,7 @@ static const struct ingenic_adc_soc_data jz4740_adc_soc_data = {
 	.battery_scale_avail = jz4740_adc_battery_scale_avail,
 	.battery_scale_avail_size = ARRAY_SIZE(jz4740_adc_battery_scale_avail),
 	.battery_vref_mode = true,
-	.has_aux2 = false,
+	.has_aux_md = false,
 	.channels = jz4740_channels,
 	.num_channels = ARRAY_SIZE(jz4740_channels),
 	.init_clk_div = NULL, /* no ADCLK register on JZ4740 */
@@ -534,7 +534,7 @@ static const struct ingenic_adc_soc_data jz4770_adc_soc_data = {
 	.battery_scale_avail = jz4770_adc_battery_scale_avail,
 	.battery_scale_avail_size = ARRAY_SIZE(jz4770_adc_battery_scale_avail),
 	.battery_vref_mode = false,
-	.has_aux2 = true,
+	.has_aux_md = true,
 	.channels = jz4770_channels,
 	.num_channels = ARRAY_SIZE(jz4770_channels),
 	.init_clk_div = jz4770_adc_init_clk_div,
@@ -581,7 +581,7 @@ static int ingenic_adc_read_chan_info_raw(struct iio_dev *iio_dev,
 
 	/* We cannot sample AUX/AUX2 in parallel. */
 	mutex_lock(&adc->aux_lock);
-	if (adc->soc_data->has_aux2 && engine == 0) {
+	if (adc->soc_data->has_aux_md && engine == 0) {
 		bit = BIT(chan->channel == INGENIC_ADC_AUX2);
 		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, bit);
 	}
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 2/6] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry
  2021-07-21 10:53 [PATCH] Ingenic: iio/adc: add JZ4760(B) support to the citral23
  2021-07-21 10:53 ` [PATCH 1/6] iio/adc: ingenic: rename has_aux2 to has_aux_md citral23
@ 2021-07-21 10:53 ` citral23
  2021-07-21 17:46   ` Paul Cercueil
  2021-07-21 10:53 ` [PATCH 3/6] iio/adc: ingenic: add JZ4760 support to the sadc driver citral23
                   ` (3 subsequent siblings)
  5 siblings, 1 reply; 29+ messages in thread
From: citral23 @ 2021-07-21 10:53 UTC (permalink / raw)
  To: paul
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact, citral23

The JZ4760(B) socs have 3 AUX inputs, add an entry to prepare including the one named AUX in the sadc driver.
Leaving the rest untouched as it's ABI.

Signed-off-by: citral23 <cbranchereau@gmail.com>
---
 include/dt-bindings/iio/adc/ingenic,adc.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/dt-bindings/iio/adc/ingenic,adc.h b/include/dt-bindings/iio/adc/ingenic,adc.h
index 4627a00e369e..a6ccc031635b 100644
--- a/include/dt-bindings/iio/adc/ingenic,adc.h
+++ b/include/dt-bindings/iio/adc/ingenic,adc.h
@@ -13,5 +13,6 @@
 #define INGENIC_ADC_TOUCH_YN	6
 #define INGENIC_ADC_TOUCH_XD	7
 #define INGENIC_ADC_TOUCH_YD	8
+#define INGENIC_ADC_AUX0	9
 
 #endif
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 3/6] iio/adc: ingenic: add JZ4760 support to the sadc driver
  2021-07-21 10:53 [PATCH] Ingenic: iio/adc: add JZ4760(B) support to the citral23
  2021-07-21 10:53 ` [PATCH 1/6] iio/adc: ingenic: rename has_aux2 to has_aux_md citral23
  2021-07-21 10:53 ` [PATCH 2/6] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry citral23
@ 2021-07-21 10:53 ` citral23
  2021-07-21 18:15   ` Paul Cercueil
  2021-07-21 10:53 ` [PATCH 4/6] iio/adc: ingenic: add JZ4760B " citral23
                   ` (2 subsequent siblings)
  5 siblings, 1 reply; 29+ messages in thread
From: citral23 @ 2021-07-21 10:53 UTC (permalink / raw)
  To: paul
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact, citral23

Signed-off-by: citral23 <cbranchereau@gmail.com>
---
 drivers/iio/adc/ingenic-adc.c | 64 +++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
index 40f2d8c2cf72..285e7aa8e37a 100644
--- a/drivers/iio/adc/ingenic-adc.c
+++ b/drivers/iio/adc/ingenic-adc.c
@@ -71,6 +71,7 @@
 #define JZ4725B_ADC_BATTERY_HIGH_VREF_BITS	10
 #define JZ4740_ADC_BATTERY_HIGH_VREF		(7500 * 0.986)
 #define JZ4740_ADC_BATTERY_HIGH_VREF_BITS	12
+#define JZ4760_ADC_BATTERY_VREF			2500
 #define JZ4770_ADC_BATTERY_VREF			1200
 #define JZ4770_ADC_BATTERY_VREF_BITS		12
 
@@ -295,6 +296,10 @@ static const int jz4740_adc_battery_scale_avail[] = {
 	JZ_ADC_BATTERY_LOW_VREF, JZ_ADC_BATTERY_LOW_VREF_BITS,
 };
 
+static const int jz4760_adc_battery_scale_avail[] = {
+	JZ4760_ADC_BATTERY_VREF, JZ4770_ADC_BATTERY_VREF_BITS,
+};
+
 static const int jz4770_adc_battery_raw_avail[] = {
 	0, 1, (1 << JZ4770_ADC_BATTERY_VREF_BITS) - 1,
 };
@@ -339,6 +344,8 @@ static int jz4725b_adc_init_clk_div(struct device *dev, struct ingenic_adc *adc)
 	return 0;
 }
 
+
+
 static int jz4770_adc_init_clk_div(struct device *dev, struct ingenic_adc *adc)
 {
 	struct clk *parent_clk;
@@ -400,6 +407,47 @@ static const struct iio_chan_spec jz4740_channels[] = {
 	},
 };
 
+static const struct iio_chan_spec jz4760_channels[] = {
+	{
+		.extend_name = "aux0",
+		.type = IIO_VOLTAGE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.indexed = 1,
+		.channel = INGENIC_ADC_AUX0,
+		.scan_index = -1,
+	},
+	{
+		.extend_name = "aux",
+		.type = IIO_VOLTAGE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.indexed = 1,
+		.channel = INGENIC_ADC_AUX,
+		.scan_index = -1,
+	},
+	{
+		.extend_name = "battery",
+		.type = IIO_VOLTAGE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW) |
+						BIT(IIO_CHAN_INFO_SCALE),
+		.indexed = 1,
+		.channel = INGENIC_ADC_BATTERY,
+		.scan_index = -1,
+	},
+	{
+		.extend_name = "aux2",
+		.type = IIO_VOLTAGE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.indexed = 1,
+		.channel = INGENIC_ADC_AUX2,
+		.scan_index = -1,
+	},
+};
+
 static const struct iio_chan_spec jz4770_channels[] = {
 	{
 		.type = IIO_VOLTAGE,
@@ -526,6 +574,20 @@ static const struct ingenic_adc_soc_data jz4740_adc_soc_data = {
 	.init_clk_div = NULL, /* no ADCLK register on JZ4740 */
 };
 
+static const struct ingenic_adc_soc_data jz4760_adc_soc_data = {
+	.battery_high_vref = JZ4760_ADC_BATTERY_VREF,
+	.battery_high_vref_bits = JZ4770_ADC_BATTERY_VREF_BITS,
+	.battery_raw_avail = jz4770_adc_battery_raw_avail,
+	.battery_raw_avail_size = ARRAY_SIZE(jz4770_adc_battery_raw_avail),
+	.battery_scale_avail = jz4760_adc_battery_scale_avail,
+	.battery_scale_avail_size = ARRAY_SIZE(jz4760_adc_battery_scale_avail),
+	.battery_vref_mode = false,
+	.has_aux_md = true,
+	.channels = jz4760_channels,
+	.num_channels = ARRAY_SIZE(jz4760_channels),
+	.init_clk_div = jz4770_adc_init_clk_div,
+};
+
 static const struct ingenic_adc_soc_data jz4770_adc_soc_data = {
 	.battery_high_vref = JZ4770_ADC_BATTERY_VREF,
 	.battery_high_vref_bits = JZ4770_ADC_BATTERY_VREF_BITS,
@@ -621,6 +683,7 @@ static int ingenic_adc_read_raw(struct iio_dev *iio_dev,
 		return ingenic_adc_read_chan_info_raw(iio_dev, chan, val);
 	case IIO_CHAN_INFO_SCALE:
 		switch (chan->channel) {
+		case INGENIC_ADC_AUX0:
 		case INGENIC_ADC_AUX:
 		case INGENIC_ADC_AUX2:
 			*val = JZ_ADC_AUX_VREF;
@@ -832,6 +895,7 @@ static int ingenic_adc_probe(struct platform_device *pdev)
 static const struct of_device_id ingenic_adc_of_match[] = {
 	{ .compatible = "ingenic,jz4725b-adc", .data = &jz4725b_adc_soc_data, },
 	{ .compatible = "ingenic,jz4740-adc", .data = &jz4740_adc_soc_data, },
+	{ .compatible = "ingenic,jz4760-adc", .data = &jz4760_adc_soc_data, },
 	{ .compatible = "ingenic,jz4770-adc", .data = &jz4770_adc_soc_data, },
 	{ },
 };
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 4/6] iio/adc: ingenic: add JZ4760B support to the sadc driver
  2021-07-21 10:53 [PATCH] Ingenic: iio/adc: add JZ4760(B) support to the citral23
                   ` (2 preceding siblings ...)
  2021-07-21 10:53 ` [PATCH 3/6] iio/adc: ingenic: add JZ4760 support to the sadc driver citral23
@ 2021-07-21 10:53 ` citral23
  2021-07-21 18:24   ` Paul Cercueil
  2021-07-21 10:53 ` [PATCH 5/6] iio/adc: ingenic: modify citral23
  2021-07-21 10:53 ` [PATCH 6/6] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation citral23
  5 siblings, 1 reply; 29+ messages in thread
From: citral23 @ 2021-07-21 10:53 UTC (permalink / raw)
  To: paul
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact, citral23

The JZ4760B variant differs slightly from the JZ4760, in that it has a bit called VBAT_SEL
in the CFG register. In order to correctly sample the battery voltage on existing handhelds
using this SOC, the bit must be cleared.

We leave the possibility to set the bit, by using the "ingenic,use-internal-divider" in the devicetree.

Signed-off-by: citral23 <cbranchereau@gmail.com>
---
 drivers/iio/adc/ingenic-adc.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
index 285e7aa8e37a..618150475421 100644
--- a/drivers/iio/adc/ingenic-adc.c
+++ b/drivers/iio/adc/ingenic-adc.c
@@ -37,6 +37,7 @@
 #define JZ_ADC_REG_CFG_SAMPLE_NUM(n)	((n) << 10)
 #define JZ_ADC_REG_CFG_PULL_UP(n)	((n) << 16)
 #define JZ_ADC_REG_CFG_CMD_SEL		BIT(22)
+#define JZ_ADC_REG_CFG_VBAT_SEL		BIT(30)
 #define JZ_ADC_REG_CFG_TOUCH_OPS_MASK	(BIT(31) | GENMASK(23, 10))
 #define JZ_ADC_REG_ADCLK_CLKDIV_LSB	0
 #define JZ4725B_ADC_REG_ADCLK_CLKDIV10US_LSB	16
@@ -869,6 +870,10 @@ static int ingenic_adc_probe(struct platform_device *pdev)
 	/* Put hardware in a known passive state. */
 	writeb(0x00, adc->base + JZ_ADC_REG_ENABLE);
 	writeb(0xff, adc->base + JZ_ADC_REG_CTRL);
+
+	if (!device_property_present(dev, "ingenic,use-internal-divider")) /* JZ4760B specific */
+		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_VBAT_SEL, 0);
+
 	usleep_range(2000, 3000); /* Must wait at least 2ms. */
 	clk_disable(adc->clk);
 
@@ -896,6 +901,7 @@ static const struct of_device_id ingenic_adc_of_match[] = {
 	{ .compatible = "ingenic,jz4725b-adc", .data = &jz4725b_adc_soc_data, },
 	{ .compatible = "ingenic,jz4740-adc", .data = &jz4740_adc_soc_data, },
 	{ .compatible = "ingenic,jz4760-adc", .data = &jz4760_adc_soc_data, },
+	{ .compatible = "ingenic,jz4760b-adc", .data = &jz4760_adc_soc_data, },
 	{ .compatible = "ingenic,jz4770-adc", .data = &jz4770_adc_soc_data, },
 	{ },
 };
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 5/6] iio/adc: ingenic: modify
  2021-07-21 10:53 [PATCH] Ingenic: iio/adc: add JZ4760(B) support to the citral23
                   ` (3 preceding siblings ...)
  2021-07-21 10:53 ` [PATCH 4/6] iio/adc: ingenic: add JZ4760B " citral23
@ 2021-07-21 10:53 ` citral23
  2021-07-21 18:28   ` Paul Cercueil
  2021-07-21 10:53 ` [PATCH 6/6] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation citral23
  5 siblings, 1 reply; 29+ messages in thread
From: citral23 @ 2021-07-21 10:53 UTC (permalink / raw)
  To: paul
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact, citral23

The current code does not allow to set MD to 0 to sample AUX0, fix it for the JZ4760(B).

Signed-off-by: citral23 <cbranchereau@gmail.com>
---
 drivers/iio/adc/ingenic-adc.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
index 618150475421..1edaae439a32 100644
--- a/drivers/iio/adc/ingenic-adc.c
+++ b/drivers/iio/adc/ingenic-adc.c
@@ -632,7 +632,7 @@ static int ingenic_adc_read_chan_info_raw(struct iio_dev *iio_dev,
 					  struct iio_chan_spec const *chan,
 					  int *val)
 {
-	int bit, ret, engine = (chan->channel == INGENIC_ADC_BATTERY);
+	int cmd, ret, engine = (chan->channel == INGENIC_ADC_BATTERY);
 	struct ingenic_adc *adc = iio_priv(iio_dev);
 
 	ret = clk_enable(adc->clk);
@@ -642,11 +642,22 @@ static int ingenic_adc_read_chan_info_raw(struct iio_dev *iio_dev,
 		return ret;
 	}
 
-	/* We cannot sample AUX/AUX2 in parallel. */
+	/* We cannot sample the aux channels in parallel. */
 	mutex_lock(&adc->aux_lock);
 	if (adc->soc_data->has_aux_md && engine == 0) {
-		bit = BIT(chan->channel == INGENIC_ADC_AUX2);
-		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, bit);
+		switch (chan->channel) {
+		case INGENIC_ADC_AUX0:
+			cmd = 0;
+			break;
+		case INGENIC_ADC_AUX:
+			cmd = 1;
+			break;
+		case INGENIC_ADC_AUX2:
+			cmd = 2;
+			break;
+		}
+             
+		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, cmd);
 	}
 
 	ret = ingenic_adc_capture(adc, engine);
@@ -654,6 +665,7 @@ static int ingenic_adc_read_chan_info_raw(struct iio_dev *iio_dev,
 		goto out;
 
 	switch (chan->channel) {
+	case INGENIC_ADC_AUX0:
 	case INGENIC_ADC_AUX:
 	case INGENIC_ADC_AUX2:
 		*val = readw(adc->base + JZ_ADC_REG_ADSDAT);
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH 6/6] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  2021-07-21 10:53 [PATCH] Ingenic: iio/adc: add JZ4760(B) support to the citral23
                   ` (4 preceding siblings ...)
  2021-07-21 10:53 ` [PATCH 5/6] iio/adc: ingenic: modify citral23
@ 2021-07-21 10:53 ` citral23
  2021-07-21 19:17   ` Paul Cercueil
  2021-07-22  2:09   ` Rob Herring
  5 siblings, 2 replies; 29+ messages in thread
From: citral23 @ 2021-07-21 10:53 UTC (permalink / raw)
  To: paul
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact, citral23

Signed-off-by: citral23 <cbranchereau@gmail.com>
---
 .../devicetree/bindings/iio/adc/ingenic,adc.yaml         | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
index 433a3fb55a2e..1b423adba61d 100644
--- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
@@ -23,6 +23,8 @@ properties:
     enum:
       - ingenic,jz4725b-adc
       - ingenic,jz4740-adc
+      - ingenic,jz4760-adc
+      - ingenic,jz4760b-adc
       - ingenic,jz4770-adc
 
   '#io-channel-cells':
@@ -43,6 +45,12 @@ properties:
   interrupts:
     maxItems: 1
 
+  ingenic,use-internal-divider: 
+    description:
+      This property can be used to set VBAT_SEL in the JZ4760B CFG register
+      to sample the battery voltage from the internal divider. If absent, it
+      will sample the external divider.  
+
 required:
   - compatible
   - '#io-channel-cells'
@@ -53,6 +61,7 @@ required:
 
 additionalProperties: false
 
+
 examples:
   - |
     #include <dt-bindings/clock/jz4740-cgu.h>
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* Re: [PATCH 1/6] iio/adc: ingenic: rename has_aux2 to has_aux_md
  2021-07-21 10:53 ` [PATCH 1/6] iio/adc: ingenic: rename has_aux2 to has_aux_md citral23
@ 2021-07-21 17:46   ` Paul Cercueil
  0 siblings, 0 replies; 29+ messages in thread
From: Paul Cercueil @ 2021-07-21 17:46 UTC (permalink / raw)
  To: citral23
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact

Hi Christophe,

Le mer., juil. 21 2021 at 12:53:12 +0200, citral23 
<cbranchereau@gmail.com> a écrit :
> The purpose of this property is to set the AUX_MD bits if true, no to 
> describe the hardware.
> Rename it to a more appropriate name.

You could add that this change is needed to support the JZ4760 which 
has three AUX channels.

> Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>

Reviewed-by: Paul Cercueil <paul@crapouillou.net>

Cheers,
-Paul

> ---
>  drivers/iio/adc/ingenic-adc.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/iio/adc/ingenic-adc.c 
> b/drivers/iio/adc/ingenic-adc.c
> index 34c03a264f74..40f2d8c2cf72 100644
> --- a/drivers/iio/adc/ingenic-adc.c
> +++ b/drivers/iio/adc/ingenic-adc.c
> @@ -92,7 +92,7 @@ struct ingenic_adc_soc_data {
>  	const int *battery_scale_avail;
>  	size_t battery_scale_avail_size;
>  	unsigned int battery_vref_mode: 1;
> -	unsigned int has_aux2: 1;
> +	unsigned int has_aux_md: 1;
>  	const struct iio_chan_spec *channels;
>  	unsigned int num_channels;
>  	int (*init_clk_div)(struct device *dev, struct ingenic_adc *adc);
> @@ -506,7 +506,7 @@ static const struct ingenic_adc_soc_data 
> jz4725b_adc_soc_data = {
>  	.battery_scale_avail = jz4725b_adc_battery_scale_avail,
>  	.battery_scale_avail_size = 
> ARRAY_SIZE(jz4725b_adc_battery_scale_avail),
>  	.battery_vref_mode = true,
> -	.has_aux2 = false,
> +	.has_aux_md = false,
>  	.channels = jz4740_channels,
>  	.num_channels = ARRAY_SIZE(jz4740_channels),
>  	.init_clk_div = jz4725b_adc_init_clk_div,
> @@ -520,7 +520,7 @@ static const struct ingenic_adc_soc_data 
> jz4740_adc_soc_data = {
>  	.battery_scale_avail = jz4740_adc_battery_scale_avail,
>  	.battery_scale_avail_size = 
> ARRAY_SIZE(jz4740_adc_battery_scale_avail),
>  	.battery_vref_mode = true,
> -	.has_aux2 = false,
> +	.has_aux_md = false,
>  	.channels = jz4740_channels,
>  	.num_channels = ARRAY_SIZE(jz4740_channels),
>  	.init_clk_div = NULL, /* no ADCLK register on JZ4740 */
> @@ -534,7 +534,7 @@ static const struct ingenic_adc_soc_data 
> jz4770_adc_soc_data = {
>  	.battery_scale_avail = jz4770_adc_battery_scale_avail,
>  	.battery_scale_avail_size = 
> ARRAY_SIZE(jz4770_adc_battery_scale_avail),
>  	.battery_vref_mode = false,
> -	.has_aux2 = true,
> +	.has_aux_md = true,
>  	.channels = jz4770_channels,
>  	.num_channels = ARRAY_SIZE(jz4770_channels),
>  	.init_clk_div = jz4770_adc_init_clk_div,
> @@ -581,7 +581,7 @@ static int ingenic_adc_read_chan_info_raw(struct 
> iio_dev *iio_dev,
> 
>  	/* We cannot sample AUX/AUX2 in parallel. */
>  	mutex_lock(&adc->aux_lock);
> -	if (adc->soc_data->has_aux2 && engine == 0) {
> +	if (adc->soc_data->has_aux_md && engine == 0) {
>  		bit = BIT(chan->channel == INGENIC_ADC_AUX2);
>  		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, bit);
>  	}
> --
> 2.30.2
> 



^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH 2/6] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry
  2021-07-21 10:53 ` [PATCH 2/6] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry citral23
@ 2021-07-21 17:46   ` Paul Cercueil
  0 siblings, 0 replies; 29+ messages in thread
From: Paul Cercueil @ 2021-07-21 17:46 UTC (permalink / raw)
  To: citral23
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact

Hi Christophe,

Le mer., juil. 21 2021 at 12:53:13 +0200, citral23 
<cbranchereau@gmail.com> a écrit :
> The JZ4760(B) socs have 3 AUX inputs, add an entry to prepare 
> including the one named AUX in the sadc driver.
> Leaving the rest untouched as it's ABI.
> 
> Signed-off-by: citral23 <cbranchereau@gmail.com>

Please use your real name when you sign a commit.

Reviewed-by: Paul Cercueil <paul@crapouillou.net>

Cheers,
-Paul

> ---
>  include/dt-bindings/iio/adc/ingenic,adc.h | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/include/dt-bindings/iio/adc/ingenic,adc.h 
> b/include/dt-bindings/iio/adc/ingenic,adc.h
> index 4627a00e369e..a6ccc031635b 100644
> --- a/include/dt-bindings/iio/adc/ingenic,adc.h
> +++ b/include/dt-bindings/iio/adc/ingenic,adc.h
> @@ -13,5 +13,6 @@
>  #define INGENIC_ADC_TOUCH_YN	6
>  #define INGENIC_ADC_TOUCH_XD	7
>  #define INGENIC_ADC_TOUCH_YD	8
> +#define INGENIC_ADC_AUX0	9
> 
>  #endif
> --
> 2.30.2
> 



^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH 3/6] iio/adc: ingenic: add JZ4760 support to the sadc driver
  2021-07-21 10:53 ` [PATCH 3/6] iio/adc: ingenic: add JZ4760 support to the sadc driver citral23
@ 2021-07-21 18:15   ` Paul Cercueil
  2021-07-22  5:09     ` Christophe Branchereau
  2021-07-23 16:13     ` [PATCH 3/6] iio/adc: ingenic: add JZ4760 support to the " Jonathan Cameron
  0 siblings, 2 replies; 29+ messages in thread
From: Paul Cercueil @ 2021-07-21 18:15 UTC (permalink / raw)
  To: citral23
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact

Hi Christophe,

Le mer., juil. 21 2021 at 12:53:14 +0200, citral23 
<cbranchereau@gmail.com> a écrit :
> Signed-off-by: citral23 <cbranchereau@gmail.com>
> ---
>  drivers/iio/adc/ingenic-adc.c | 64 
> +++++++++++++++++++++++++++++++++++
>  1 file changed, 64 insertions(+)
> 
> diff --git a/drivers/iio/adc/ingenic-adc.c 
> b/drivers/iio/adc/ingenic-adc.c
> index 40f2d8c2cf72..285e7aa8e37a 100644
> --- a/drivers/iio/adc/ingenic-adc.c
> +++ b/drivers/iio/adc/ingenic-adc.c
> @@ -71,6 +71,7 @@
>  #define JZ4725B_ADC_BATTERY_HIGH_VREF_BITS	10
>  #define JZ4740_ADC_BATTERY_HIGH_VREF		(7500 * 0.986)
>  #define JZ4740_ADC_BATTERY_HIGH_VREF_BITS	12
> +#define JZ4760_ADC_BATTERY_VREF			2500
>  #define JZ4770_ADC_BATTERY_VREF			1200
>  #define JZ4770_ADC_BATTERY_VREF_BITS		12
> 
> @@ -295,6 +296,10 @@ static const int 
> jz4740_adc_battery_scale_avail[] = {
>  	JZ_ADC_BATTERY_LOW_VREF, JZ_ADC_BATTERY_LOW_VREF_BITS,
>  };
> 
> +static const int jz4760_adc_battery_scale_avail[] = {
> +	JZ4760_ADC_BATTERY_VREF, JZ4770_ADC_BATTERY_VREF_BITS,
> +};
> +
>  static const int jz4770_adc_battery_raw_avail[] = {
>  	0, 1, (1 << JZ4770_ADC_BATTERY_VREF_BITS) - 1,
>  };
> @@ -339,6 +344,8 @@ static int jz4725b_adc_init_clk_div(struct device 
> *dev, struct ingenic_adc *adc)
>  	return 0;
>  }
> 
> +
> +

Unrelated cosmetic change - remove it.

>  static int jz4770_adc_init_clk_div(struct device *dev, struct 
> ingenic_adc *adc)
>  {
>  	struct clk *parent_clk;
> @@ -400,6 +407,47 @@ static const struct iio_chan_spec 
> jz4740_channels[] = {
>  	},
>  };
> 
> +static const struct iio_chan_spec jz4760_channels[] = {
> +	{
> +		.extend_name = "aux0",
> +		.type = IIO_VOLTAGE,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> +				      BIT(IIO_CHAN_INFO_SCALE),
> +		.indexed = 1,
> +		.channel = INGENIC_ADC_AUX0,
> +		.scan_index = -1,
> +	},
> +	{
> +		.extend_name = "aux",
> +		.type = IIO_VOLTAGE,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> +				      BIT(IIO_CHAN_INFO_SCALE),
> +		.indexed = 1,
> +		.channel = INGENIC_ADC_AUX,
> +		.scan_index = -1,
> +	},

A couple of things. First, ".extend_name" is deprecated now... But 
since the driver used it before, I suppose it doesn't make sense to use 
labels just for this SoC (as we can't remove .extend_name for other 
SoCs because of ABI). So I suppose it works here, but maybe Jonathan 
disagrees.

Also, you should probably use "aux1" as the channel's name instead of 
"aux", independently of the macro name you used in the .channel field.

> +	{
> +		.extend_name = "battery",
> +		.type = IIO_VOLTAGE,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> +				      BIT(IIO_CHAN_INFO_SCALE),
> +		.info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW) |
> +						BIT(IIO_CHAN_INFO_SCALE),
> +		.indexed = 1,
> +		.channel = INGENIC_ADC_BATTERY,
> +		.scan_index = -1,
> +	},

Swap the battery channel at the end, no? First the three AUX then the 
battery channel?

The rest looks pretty good to me.

Cheers,
-Paul

> +	{
> +		.extend_name = "aux2",
> +		.type = IIO_VOLTAGE,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> +				      BIT(IIO_CHAN_INFO_SCALE),
> +		.indexed = 1,
> +		.channel = INGENIC_ADC_AUX2,
> +		.scan_index = -1,
> +	},
> +};
> +
>  static const struct iio_chan_spec jz4770_channels[] = {
>  	{
>  		.type = IIO_VOLTAGE,
> @@ -526,6 +574,20 @@ static const struct ingenic_adc_soc_data 
> jz4740_adc_soc_data = {
>  	.init_clk_div = NULL, /* no ADCLK register on JZ4740 */
>  };
> 
> +static const struct ingenic_adc_soc_data jz4760_adc_soc_data = {
> +	.battery_high_vref = JZ4760_ADC_BATTERY_VREF,
> +	.battery_high_vref_bits = JZ4770_ADC_BATTERY_VREF_BITS,
> +	.battery_raw_avail = jz4770_adc_battery_raw_avail,
> +	.battery_raw_avail_size = ARRAY_SIZE(jz4770_adc_battery_raw_avail),
> +	.battery_scale_avail = jz4760_adc_battery_scale_avail,
> +	.battery_scale_avail_size = 
> ARRAY_SIZE(jz4760_adc_battery_scale_avail),
> +	.battery_vref_mode = false,
> +	.has_aux_md = true,
> +	.channels = jz4760_channels,
> +	.num_channels = ARRAY_SIZE(jz4760_channels),
> +	.init_clk_div = jz4770_adc_init_clk_div,
> +};
> +
>  static const struct ingenic_adc_soc_data jz4770_adc_soc_data = {
>  	.battery_high_vref = JZ4770_ADC_BATTERY_VREF,
>  	.battery_high_vref_bits = JZ4770_ADC_BATTERY_VREF_BITS,
> @@ -621,6 +683,7 @@ static int ingenic_adc_read_raw(struct iio_dev 
> *iio_dev,
>  		return ingenic_adc_read_chan_info_raw(iio_dev, chan, val);
>  	case IIO_CHAN_INFO_SCALE:
>  		switch (chan->channel) {
> +		case INGENIC_ADC_AUX0:
>  		case INGENIC_ADC_AUX:
>  		case INGENIC_ADC_AUX2:
>  			*val = JZ_ADC_AUX_VREF;
> @@ -832,6 +895,7 @@ static int ingenic_adc_probe(struct 
> platform_device *pdev)
>  static const struct of_device_id ingenic_adc_of_match[] = {
>  	{ .compatible = "ingenic,jz4725b-adc", .data = 
> &jz4725b_adc_soc_data, },
>  	{ .compatible = "ingenic,jz4740-adc", .data = &jz4740_adc_soc_data, 
> },
> +	{ .compatible = "ingenic,jz4760-adc", .data = &jz4760_adc_soc_data, 
> },
>  	{ .compatible = "ingenic,jz4770-adc", .data = &jz4770_adc_soc_data, 
> },
>  	{ },
>  };
> --
> 2.30.2
> 



^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH 4/6] iio/adc: ingenic: add JZ4760B support to the sadc driver
  2021-07-21 10:53 ` [PATCH 4/6] iio/adc: ingenic: add JZ4760B " citral23
@ 2021-07-21 18:24   ` Paul Cercueil
  0 siblings, 0 replies; 29+ messages in thread
From: Paul Cercueil @ 2021-07-21 18:24 UTC (permalink / raw)
  To: citral23
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact

Hi Christophe,

Le mer., juil. 21 2021 at 12:53:15 +0200, citral23 
<cbranchereau@gmail.com> a écrit :
> The JZ4760B variant differs slightly from the JZ4760, in that it has 
> a bit called VBAT_SEL
> in the CFG register. In order to correctly sample the battery voltage 
> on existing handhelds
> using this SOC, the bit must be cleared.
> 
> We leave the possibility to set the bit, by using the 
> "ingenic,use-internal-divider" in the devicetree.
> 
> Signed-off-by: citral23 <cbranchereau@gmail.com>
> ---
>  drivers/iio/adc/ingenic-adc.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/iio/adc/ingenic-adc.c 
> b/drivers/iio/adc/ingenic-adc.c
> index 285e7aa8e37a..618150475421 100644
> --- a/drivers/iio/adc/ingenic-adc.c
> +++ b/drivers/iio/adc/ingenic-adc.c
> @@ -37,6 +37,7 @@
>  #define JZ_ADC_REG_CFG_SAMPLE_NUM(n)	((n) << 10)
>  #define JZ_ADC_REG_CFG_PULL_UP(n)	((n) << 16)
>  #define JZ_ADC_REG_CFG_CMD_SEL		BIT(22)
> +#define JZ_ADC_REG_CFG_VBAT_SEL		BIT(30)
>  #define JZ_ADC_REG_CFG_TOUCH_OPS_MASK	(BIT(31) | GENMASK(23, 10))
>  #define JZ_ADC_REG_ADCLK_CLKDIV_LSB	0
>  #define JZ4725B_ADC_REG_ADCLK_CLKDIV10US_LSB	16
> @@ -869,6 +870,10 @@ static int ingenic_adc_probe(struct 
> platform_device *pdev)
>  	/* Put hardware in a known passive state. */
>  	writeb(0x00, adc->base + JZ_ADC_REG_ENABLE);
>  	writeb(0xff, adc->base + JZ_ADC_REG_CTRL);
> +
> +	if (!device_property_present(dev, "ingenic,use-internal-divider")) 
> /* JZ4760B specific */
> +		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_VBAT_SEL, 0);

You miss an "else" part, no? Set the bit if the property is present, 
clear it if it is missing? You can't really rely on the reset value, 
since (e.g.) the bootloader could have changed it.

Cheers,
-Paul

> +
>  	usleep_range(2000, 3000); /* Must wait at least 2ms. */
>  	clk_disable(adc->clk);
> 
> @@ -896,6 +901,7 @@ static const struct of_device_id 
> ingenic_adc_of_match[] = {
>  	{ .compatible = "ingenic,jz4725b-adc", .data = 
> &jz4725b_adc_soc_data, },
>  	{ .compatible = "ingenic,jz4740-adc", .data = &jz4740_adc_soc_data, 
> },
>  	{ .compatible = "ingenic,jz4760-adc", .data = &jz4760_adc_soc_data, 
> },
> +	{ .compatible = "ingenic,jz4760b-adc", .data = 
> &jz4760_adc_soc_data, },
>  	{ .compatible = "ingenic,jz4770-adc", .data = &jz4770_adc_soc_data, 
> },
>  	{ },
>  };
> --
> 2.30.2
> 



^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH 5/6] iio/adc: ingenic: modify
  2021-07-21 10:53 ` [PATCH 5/6] iio/adc: ingenic: modify citral23
@ 2021-07-21 18:28   ` Paul Cercueil
  0 siblings, 0 replies; 29+ messages in thread
From: Paul Cercueil @ 2021-07-21 18:28 UTC (permalink / raw)
  To: citral23
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact

Hi Christophe,

Le mer., juil. 21 2021 at 12:53:16 +0200, citral23 
<cbranchereau@gmail.com> a écrit :
> The current code does not allow to set MD to 0 to sample AUX0, fix it 
> for the JZ4760(B).

Well, then this should be merged with patch 3, because that means 
JZ4760 support does not work without it.

Also, concise commit messages are good, but "modify" is a bit too 
concise ;)

Cheers,
-Paul

> Signed-off-by: citral23 <cbranchereau@gmail.com>
> ---
>  drivers/iio/adc/ingenic-adc.c | 20 ++++++++++++++++----
>  1 file changed, 16 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/iio/adc/ingenic-adc.c 
> b/drivers/iio/adc/ingenic-adc.c
> index 618150475421..1edaae439a32 100644
> --- a/drivers/iio/adc/ingenic-adc.c
> +++ b/drivers/iio/adc/ingenic-adc.c
> @@ -632,7 +632,7 @@ static int ingenic_adc_read_chan_info_raw(struct 
> iio_dev *iio_dev,
>  					  struct iio_chan_spec const *chan,
>  					  int *val)
>  {
> -	int bit, ret, engine = (chan->channel == INGENIC_ADC_BATTERY);
> +	int cmd, ret, engine = (chan->channel == INGENIC_ADC_BATTERY);
>  	struct ingenic_adc *adc = iio_priv(iio_dev);
> 
>  	ret = clk_enable(adc->clk);
> @@ -642,11 +642,22 @@ static int 
> ingenic_adc_read_chan_info_raw(struct iio_dev *iio_dev,
>  		return ret;
>  	}
> 
> -	/* We cannot sample AUX/AUX2 in parallel. */
> +	/* We cannot sample the aux channels in parallel. */
>  	mutex_lock(&adc->aux_lock);
>  	if (adc->soc_data->has_aux_md && engine == 0) {
> -		bit = BIT(chan->channel == INGENIC_ADC_AUX2);
> -		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, bit);
> +		switch (chan->channel) {
> +		case INGENIC_ADC_AUX0:
> +			cmd = 0;
> +			break;
> +		case INGENIC_ADC_AUX:
> +			cmd = 1;
> +			break;
> +		case INGENIC_ADC_AUX2:
> +			cmd = 2;
> +			break;
> +		}
> +
> +		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, cmd);
>  	}
> 
>  	ret = ingenic_adc_capture(adc, engine);
> @@ -654,6 +665,7 @@ static int ingenic_adc_read_chan_info_raw(struct 
> iio_dev *iio_dev,
>  		goto out;
> 
>  	switch (chan->channel) {
> +	case INGENIC_ADC_AUX0:
>  	case INGENIC_ADC_AUX:
>  	case INGENIC_ADC_AUX2:
>  		*val = readw(adc->base + JZ_ADC_REG_ADSDAT);
> --
> 2.30.2
> 



^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH 6/6] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  2021-07-21 10:53 ` [PATCH 6/6] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation citral23
@ 2021-07-21 19:17   ` Paul Cercueil
  2021-07-23 16:10     ` Jonathan Cameron
  2021-07-22  2:09   ` Rob Herring
  1 sibling, 1 reply; 29+ messages in thread
From: Paul Cercueil @ 2021-07-21 19:17 UTC (permalink / raw)
  To: citral23
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact

Hi Christophe,

Please always add a short description in your patches, even if all you 
do is repeat the patch title.


Le mer., juil. 21 2021 at 12:53:17 +0200, citral23 
<cbranchereau@gmail.com> a écrit :
> Signed-off-by: citral23 <cbranchereau@gmail.com>
> ---
>  .../devicetree/bindings/iio/adc/ingenic,adc.yaml         | 9 
> +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git 
> a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml 
> b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
> index 433a3fb55a2e..1b423adba61d 100644
> --- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
> @@ -23,6 +23,8 @@ properties:
>      enum:
>        - ingenic,jz4725b-adc
>        - ingenic,jz4740-adc
> +      - ingenic,jz4760-adc
> +      - ingenic,jz4760b-adc
>        - ingenic,jz4770-adc
> 
>    '#io-channel-cells':
> @@ -43,6 +45,12 @@ properties:
>    interrupts:
>      maxItems: 1
> 
> +  ingenic,use-internal-divider:
> +    description:
> +      This property can be used to set VBAT_SEL in the JZ4760B CFG 
> register
> +      to sample the battery voltage from the internal divider. If 
> absent, it
> +      will sample the external divider.

Please remove trailing spaces. And you don't need to describe internal 
behaviour; you only need to explain the functionality in a user-facing 
perspective. Something like:

"If present, battery voltage is read from the VBAT_IR pin, which has an 
internal /4 divider. If absent, it is read through the VBAT_ER pin, 
which does not have such divider."

You also don't specify the type of the property, please add "type: 
boolean" before the description.

There should also be a way to make sure that this property can only be 
used with the JZ4760B SoC. So a dependency for this vendor property on 
the "ingenic,jz4760b-adc" compatible string. But I'm honestly not sure 
how to express that... Maybe Rob can help.

> +
>  required:
>    - compatible
>    - '#io-channel-cells'
> @@ -53,6 +61,7 @@ required:
> 
>  additionalProperties: false
> 
> +

Remove the extra newline.

Cheers,
-Paul

>  examples:
>    - |
>      #include <dt-bindings/clock/jz4740-cgu.h>
> --
> 2.30.2
> 



^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH 6/6] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  2021-07-21 10:53 ` [PATCH 6/6] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation citral23
  2021-07-21 19:17   ` Paul Cercueil
@ 2021-07-22  2:09   ` Rob Herring
  1 sibling, 0 replies; 29+ messages in thread
From: Rob Herring @ 2021-07-22  2:09 UTC (permalink / raw)
  To: citral23
  Cc: lars, contact, linux-mips, paul, jic23, robh+dt, devicetree,
	linux, linux-iio, linux-kernel

On Wed, 21 Jul 2021 12:53:17 +0200, citral23 wrote:
> Signed-off-by: citral23 <cbranchereau@gmail.com>
> ---
>  .../devicetree/bindings/iio/adc/ingenic,adc.yaml         | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml: properties:ingenic,use-internal-divider: 'oneOf' conditional failed, one must be fixed:
	'type' is a required property
		hint: A vendor boolean property can use "type: boolean"
	/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml: properties:ingenic,use-internal-divider: 'oneOf' conditional failed, one must be fixed:
		'enum' is a required property
		'const' is a required property
		hint: A vendor string property with exact values has an implicit type
		from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml#
	/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml: properties:ingenic,use-internal-divider: 'oneOf' conditional failed, one must be fixed:
		'$ref' is a required property
		'allOf' is a required property
		hint: A vendor property needs a $ref to types.yaml
		from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml#
	hint: Vendor specific properties must have a type and description unless they have a defined, common suffix.
	from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml: ignoring, error in schema: properties: ingenic,use-internal-divider
warning: no schema found in file: ./Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
Documentation/devicetree/bindings/iio/adc/ingenic,adc.example.dt.yaml:0:0: /example-0/adc@10070000: failed to match any schema with compatible: ['ingenic,jz4740-adc']
\ndoc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1508137

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.


^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH 3/6] iio/adc: ingenic: add JZ4760 support to the sadc driver
  2021-07-21 18:15   ` Paul Cercueil
@ 2021-07-22  5:09     ` Christophe Branchereau
  2021-07-22  5:23       ` Guenter Roeck
  2021-07-23 16:13     ` [PATCH 3/6] iio/adc: ingenic: add JZ4760 support to the " Jonathan Cameron
  1 sibling, 1 reply; 29+ messages in thread
From: Christophe Branchereau @ 2021-07-22  5:09 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact

Hello Paul, thank you for all the feedback, duly noted I will V2,
there is just one I disagree with:

On Wed, Jul 21, 2021 at 8:15 PM Paul Cercueil <paul@crapouillou.net> wrote:
>
> Hi Christophe,
>
> Le mer., juil. 21 2021 at 12:53:14 +0200, citral23
> <cbranchereau@gmail.com> a écrit :
> > Signed-off-by: citral23 <cbranchereau@gmail.com>
> > ---
> >  drivers/iio/adc/ingenic-adc.c | 64
> > +++++++++++++++++++++++++++++++++++
> >  1 file changed, 64 insertions(+)
> >
> > diff --git a/drivers/iio/adc/ingenic-adc.c
> > b/drivers/iio/adc/ingenic-adc.c
> > index 40f2d8c2cf72..285e7aa8e37a 100644
> > --- a/drivers/iio/adc/ingenic-adc.c
> > +++ b/drivers/iio/adc/ingenic-adc.c
> > @@ -71,6 +71,7 @@
> >  #define JZ4725B_ADC_BATTERY_HIGH_VREF_BITS   10
> >  #define JZ4740_ADC_BATTERY_HIGH_VREF         (7500 * 0.986)
> >  #define JZ4740_ADC_BATTERY_HIGH_VREF_BITS    12
> > +#define JZ4760_ADC_BATTERY_VREF                      2500
> >  #define JZ4770_ADC_BATTERY_VREF                      1200
> >  #define JZ4770_ADC_BATTERY_VREF_BITS         12
> >
> > @@ -295,6 +296,10 @@ static const int
> > jz4740_adc_battery_scale_avail[] = {
> >       JZ_ADC_BATTERY_LOW_VREF, JZ_ADC_BATTERY_LOW_VREF_BITS,
> >  };
> >
> > +static const int jz4760_adc_battery_scale_avail[] = {
> > +     JZ4760_ADC_BATTERY_VREF, JZ4770_ADC_BATTERY_VREF_BITS,
> > +};
> > +
> >  static const int jz4770_adc_battery_raw_avail[] = {
> >       0, 1, (1 << JZ4770_ADC_BATTERY_VREF_BITS) - 1,
> >  };
> > @@ -339,6 +344,8 @@ static int jz4725b_adc_init_clk_div(struct device
> > *dev, struct ingenic_adc *adc)
> >       return 0;
> >  }
> >
> > +
> > +
>
> Unrelated cosmetic change - remove it.

This is not cosmetic, but to add a VREF of 2.5V for the jz4760, as per specs

>
> >  static int jz4770_adc_init_clk_div(struct device *dev, struct
> > ingenic_adc *adc)
> >  {
> >       struct clk *parent_clk;
> > @@ -400,6 +407,47 @@ static const struct iio_chan_spec
> > jz4740_channels[] = {
> >       },
> >  };
> >
> > +static const struct iio_chan_spec jz4760_channels[] = {
> > +     {
> > +             .extend_name = "aux0",
> > +             .type = IIO_VOLTAGE,
> > +             .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > +                                   BIT(IIO_CHAN_INFO_SCALE),
> > +             .indexed = 1,
> > +             .channel = INGENIC_ADC_AUX0,
> > +             .scan_index = -1,
> > +     },
> > +     {
> > +             .extend_name = "aux",
> > +             .type = IIO_VOLTAGE,
> > +             .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > +                                   BIT(IIO_CHAN_INFO_SCALE),
> > +             .indexed = 1,
> > +             .channel = INGENIC_ADC_AUX,
> > +             .scan_index = -1,
> > +     },
>
> A couple of things. First, ".extend_name" is deprecated now... But
> since the driver used it before, I suppose it doesn't make sense to use
> labels just for this SoC (as we can't remove .extend_name for other
> SoCs because of ABI). So I suppose it works here, but maybe Jonathan
> disagrees.
>
> Also, you should probably use "aux1" as the channel's name instead of
> "aux", independently of the macro name you used in the .channel field.
>
> > +     {
> > +             .extend_name = "battery",
> > +             .type = IIO_VOLTAGE,
> > +             .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > +                                   BIT(IIO_CHAN_INFO_SCALE),
> > +             .info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW) |
> > +                                             BIT(IIO_CHAN_INFO_SCALE),
> > +             .indexed = 1,
> > +             .channel = INGENIC_ADC_BATTERY,
> > +             .scan_index = -1,
> > +     },
>
> Swap the battery channel at the end, no? First the three AUX then the
> battery channel?
>
> The rest looks pretty good to me.
>
> Cheers,
> -Paul
>
> > +     {
> > +             .extend_name = "aux2",
> > +             .type = IIO_VOLTAGE,
> > +             .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > +                                   BIT(IIO_CHAN_INFO_SCALE),
> > +             .indexed = 1,
> > +             .channel = INGENIC_ADC_AUX2,
> > +             .scan_index = -1,
> > +     },
> > +};
> > +
> >  static const struct iio_chan_spec jz4770_channels[] = {
> >       {
> >               .type = IIO_VOLTAGE,
> > @@ -526,6 +574,20 @@ static const struct ingenic_adc_soc_data
> > jz4740_adc_soc_data = {
> >       .init_clk_div = NULL, /* no ADCLK register on JZ4740 */
> >  };
> >
> > +static const struct ingenic_adc_soc_data jz4760_adc_soc_data = {
> > +     .battery_high_vref = JZ4760_ADC_BATTERY_VREF,
> > +     .battery_high_vref_bits = JZ4770_ADC_BATTERY_VREF_BITS,
> > +     .battery_raw_avail = jz4770_adc_battery_raw_avail,
> > +     .battery_raw_avail_size = ARRAY_SIZE(jz4770_adc_battery_raw_avail),
> > +     .battery_scale_avail = jz4760_adc_battery_scale_avail,
> > +     .battery_scale_avail_size =
> > ARRAY_SIZE(jz4760_adc_battery_scale_avail),
> > +     .battery_vref_mode = false,
> > +     .has_aux_md = true,
> > +     .channels = jz4760_channels,
> > +     .num_channels = ARRAY_SIZE(jz4760_channels),
> > +     .init_clk_div = jz4770_adc_init_clk_div,
> > +};
> > +
> >  static const struct ingenic_adc_soc_data jz4770_adc_soc_data = {
> >       .battery_high_vref = JZ4770_ADC_BATTERY_VREF,
> >       .battery_high_vref_bits = JZ4770_ADC_BATTERY_VREF_BITS,
> > @@ -621,6 +683,7 @@ static int ingenic_adc_read_raw(struct iio_dev
> > *iio_dev,
> >               return ingenic_adc_read_chan_info_raw(iio_dev, chan, val);
> >       case IIO_CHAN_INFO_SCALE:
> >               switch (chan->channel) {
> > +             case INGENIC_ADC_AUX0:
> >               case INGENIC_ADC_AUX:
> >               case INGENIC_ADC_AUX2:
> >                       *val = JZ_ADC_AUX_VREF;
> > @@ -832,6 +895,7 @@ static int ingenic_adc_probe(struct
> > platform_device *pdev)
> >  static const struct of_device_id ingenic_adc_of_match[] = {
> >       { .compatible = "ingenic,jz4725b-adc", .data =
> > &jz4725b_adc_soc_data, },
> >       { .compatible = "ingenic,jz4740-adc", .data = &jz4740_adc_soc_data,
> > },
> > +     { .compatible = "ingenic,jz4760-adc", .data = &jz4760_adc_soc_data,
> > },
> >       { .compatible = "ingenic,jz4770-adc", .data = &jz4770_adc_soc_data,
> > },
> >       { },
> >  };
> > --
> > 2.30.2
> >
>
>
KR
CB

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH 3/6] iio/adc: ingenic: add JZ4760 support to the sadc driver
  2021-07-22  5:09     ` Christophe Branchereau
@ 2021-07-22  5:23       ` Guenter Roeck
  2021-07-23  8:58         ` [PATCH V2 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic " Christophe Branchereau
  0 siblings, 1 reply; 29+ messages in thread
From: Guenter Roeck @ 2021-07-22  5:23 UTC (permalink / raw)
  To: Christophe Branchereau, Paul Cercueil
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, contact

On 7/21/21 10:09 PM, Christophe Branchereau wrote:
> Hello Paul, thank you for all the feedback, duly noted I will V2,
> there is just one I disagree with:
> 
> On Wed, Jul 21, 2021 at 8:15 PM Paul Cercueil <paul@crapouillou.net> wrote:
>>
>> Hi Christophe,
>>
>> Le mer., juil. 21 2021 at 12:53:14 +0200, citral23
>> <cbranchereau@gmail.com> a écrit :
>>> Signed-off-by: citral23 <cbranchereau@gmail.com>
>>> ---
>>>   drivers/iio/adc/ingenic-adc.c | 64
>>> +++++++++++++++++++++++++++++++++++
>>>   1 file changed, 64 insertions(+)
>>>
>>> diff --git a/drivers/iio/adc/ingenic-adc.c
>>> b/drivers/iio/adc/ingenic-adc.c
>>> index 40f2d8c2cf72..285e7aa8e37a 100644
>>> --- a/drivers/iio/adc/ingenic-adc.c
>>> +++ b/drivers/iio/adc/ingenic-adc.c
>>> @@ -71,6 +71,7 @@
>>>   #define JZ4725B_ADC_BATTERY_HIGH_VREF_BITS   10
>>>   #define JZ4740_ADC_BATTERY_HIGH_VREF         (7500 * 0.986)
>>>   #define JZ4740_ADC_BATTERY_HIGH_VREF_BITS    12
>>> +#define JZ4760_ADC_BATTERY_VREF                      2500
>>>   #define JZ4770_ADC_BATTERY_VREF                      1200
>>>   #define JZ4770_ADC_BATTERY_VREF_BITS         12
>>>
>>> @@ -295,6 +296,10 @@ static const int
>>> jz4740_adc_battery_scale_avail[] = {
>>>        JZ_ADC_BATTERY_LOW_VREF, JZ_ADC_BATTERY_LOW_VREF_BITS,
>>>   };
>>>
>>> +static const int jz4760_adc_battery_scale_avail[] = {
>>> +     JZ4760_ADC_BATTERY_VREF, JZ4770_ADC_BATTERY_VREF_BITS,
>>> +};
>>> +
>>>   static const int jz4770_adc_battery_raw_avail[] = {
>>>        0, 1, (1 << JZ4770_ADC_BATTERY_VREF_BITS) - 1,
>>>   };
>>> @@ -339,6 +344,8 @@ static int jz4725b_adc_init_clk_div(struct device
>>> *dev, struct ingenic_adc *adc)
>>>        return 0;
>>>   }
>>>
>>> +
>>> +
>>
>> Unrelated cosmetic change - remove it.
> 
> This is not cosmetic, but to add a VREF of 2.5V for the jz4760, as per specs
> 

Two added empty lines are not cosmetic ?

Guenter

>>
>>>   static int jz4770_adc_init_clk_div(struct device *dev, struct
>>> ingenic_adc *adc)
>>>   {
>>>        struct clk *parent_clk;
>>> @@ -400,6 +407,47 @@ static const struct iio_chan_spec
>>> jz4740_channels[] = {
>>>        },
>>>   };
>>>
>>> +static const struct iio_chan_spec jz4760_channels[] = {
>>> +     {
>>> +             .extend_name = "aux0",
>>> +             .type = IIO_VOLTAGE,
>>> +             .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>>> +                                   BIT(IIO_CHAN_INFO_SCALE),
>>> +             .indexed = 1,
>>> +             .channel = INGENIC_ADC_AUX0,
>>> +             .scan_index = -1,
>>> +     },
>>> +     {
>>> +             .extend_name = "aux",
>>> +             .type = IIO_VOLTAGE,
>>> +             .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>>> +                                   BIT(IIO_CHAN_INFO_SCALE),
>>> +             .indexed = 1,
>>> +             .channel = INGENIC_ADC_AUX,
>>> +             .scan_index = -1,
>>> +     },
>>
>> A couple of things. First, ".extend_name" is deprecated now... But
>> since the driver used it before, I suppose it doesn't make sense to use
>> labels just for this SoC (as we can't remove .extend_name for other
>> SoCs because of ABI). So I suppose it works here, but maybe Jonathan
>> disagrees.
>>
>> Also, you should probably use "aux1" as the channel's name instead of
>> "aux", independently of the macro name you used in the .channel field.
>>
>>> +     {
>>> +             .extend_name = "battery",
>>> +             .type = IIO_VOLTAGE,
>>> +             .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>>> +                                   BIT(IIO_CHAN_INFO_SCALE),
>>> +             .info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW) |
>>> +                                             BIT(IIO_CHAN_INFO_SCALE),
>>> +             .indexed = 1,
>>> +             .channel = INGENIC_ADC_BATTERY,
>>> +             .scan_index = -1,
>>> +     },
>>
>> Swap the battery channel at the end, no? First the three AUX then the
>> battery channel?
>>
>> The rest looks pretty good to me.
>>
>> Cheers,
>> -Paul
>>
>>> +     {
>>> +             .extend_name = "aux2",
>>> +             .type = IIO_VOLTAGE,
>>> +             .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>>> +                                   BIT(IIO_CHAN_INFO_SCALE),
>>> +             .indexed = 1,
>>> +             .channel = INGENIC_ADC_AUX2,
>>> +             .scan_index = -1,
>>> +     },
>>> +};
>>> +
>>>   static const struct iio_chan_spec jz4770_channels[] = {
>>>        {
>>>                .type = IIO_VOLTAGE,
>>> @@ -526,6 +574,20 @@ static const struct ingenic_adc_soc_data
>>> jz4740_adc_soc_data = {
>>>        .init_clk_div = NULL, /* no ADCLK register on JZ4740 */
>>>   };
>>>
>>> +static const struct ingenic_adc_soc_data jz4760_adc_soc_data = {
>>> +     .battery_high_vref = JZ4760_ADC_BATTERY_VREF,
>>> +     .battery_high_vref_bits = JZ4770_ADC_BATTERY_VREF_BITS,
>>> +     .battery_raw_avail = jz4770_adc_battery_raw_avail,
>>> +     .battery_raw_avail_size = ARRAY_SIZE(jz4770_adc_battery_raw_avail),
>>> +     .battery_scale_avail = jz4760_adc_battery_scale_avail,
>>> +     .battery_scale_avail_size =
>>> ARRAY_SIZE(jz4760_adc_battery_scale_avail),
>>> +     .battery_vref_mode = false,
>>> +     .has_aux_md = true,
>>> +     .channels = jz4760_channels,
>>> +     .num_channels = ARRAY_SIZE(jz4760_channels),
>>> +     .init_clk_div = jz4770_adc_init_clk_div,
>>> +};
>>> +
>>>   static const struct ingenic_adc_soc_data jz4770_adc_soc_data = {
>>>        .battery_high_vref = JZ4770_ADC_BATTERY_VREF,
>>>        .battery_high_vref_bits = JZ4770_ADC_BATTERY_VREF_BITS,
>>> @@ -621,6 +683,7 @@ static int ingenic_adc_read_raw(struct iio_dev
>>> *iio_dev,
>>>                return ingenic_adc_read_chan_info_raw(iio_dev, chan, val);
>>>        case IIO_CHAN_INFO_SCALE:
>>>                switch (chan->channel) {
>>> +             case INGENIC_ADC_AUX0:
>>>                case INGENIC_ADC_AUX:
>>>                case INGENIC_ADC_AUX2:
>>>                        *val = JZ_ADC_AUX_VREF;
>>> @@ -832,6 +895,7 @@ static int ingenic_adc_probe(struct
>>> platform_device *pdev)
>>>   static const struct of_device_id ingenic_adc_of_match[] = {
>>>        { .compatible = "ingenic,jz4725b-adc", .data =
>>> &jz4725b_adc_soc_data, },
>>>        { .compatible = "ingenic,jz4740-adc", .data = &jz4740_adc_soc_data,
>>> },
>>> +     { .compatible = "ingenic,jz4760-adc", .data = &jz4760_adc_soc_data,
>>> },
>>>        { .compatible = "ingenic,jz4770-adc", .data = &jz4770_adc_soc_data,
>>> },
>>>        { },
>>>   };
>>> --
>>> 2.30.2
>>>
>>
>>
> KR
> CB
> 


^ permalink raw reply	[flat|nested] 29+ messages in thread

* [PATCH V2 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic sadc driver
  2021-07-22  5:23       ` Guenter Roeck
@ 2021-07-23  8:58         ` Christophe Branchereau
  2021-07-23  8:58           ` [PATCH V2 1/5] iio/adc: ingenic: rename has_aux2 to has_aux_md Christophe Branchereau
                             ` (5 more replies)
  0 siblings, 6 replies; 29+ messages in thread
From: Christophe Branchereau @ 2021-07-23  8:58 UTC (permalink / raw)
  To: paul
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact, Christophe Branchereau

This is a set of patches to add support to the JZ4760(B) socs found in numerous gaming handhelds and some
mp3 players.

Christophe Branchereau (5):
  iio/adc: ingenic: rename has_aux2 to has_aux_md
  dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry
  iio/adc: ingenic: add JZ4760 support to the sadc driver
  iio/adc: ingenic: add JZ4760B support to the sadc driver
  dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc
    Documentation


^ permalink raw reply	[flat|nested] 29+ messages in thread

* [PATCH V2 1/5] iio/adc: ingenic: rename has_aux2 to has_aux_md
  2021-07-23  8:58         ` [PATCH V2 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic " Christophe Branchereau
@ 2021-07-23  8:58           ` Christophe Branchereau
  2021-07-23  8:58           ` [PATCH V2 2/5] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry Christophe Branchereau
                             ` (4 subsequent siblings)
  5 siblings, 0 replies; 29+ messages in thread
From: Christophe Branchereau @ 2021-07-23  8:58 UTC (permalink / raw)
  To: paul
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact, Christophe Branchereau

The jz4760(b) socs have 3 aux channels.

The purpose of has_aux2 is to set the MD bits used to select
the AUX channel to be sampled, not to describe the hardware.

Rename it to a more appropriate name.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
---
 drivers/iio/adc/ingenic-adc.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
index 34c03a264f74..40f2d8c2cf72 100644
--- a/drivers/iio/adc/ingenic-adc.c
+++ b/drivers/iio/adc/ingenic-adc.c
@@ -92,7 +92,7 @@ struct ingenic_adc_soc_data {
 	const int *battery_scale_avail;
 	size_t battery_scale_avail_size;
 	unsigned int battery_vref_mode: 1;
-	unsigned int has_aux2: 1;
+	unsigned int has_aux_md: 1;
 	const struct iio_chan_spec *channels;
 	unsigned int num_channels;
 	int (*init_clk_div)(struct device *dev, struct ingenic_adc *adc);
@@ -506,7 +506,7 @@ static const struct ingenic_adc_soc_data jz4725b_adc_soc_data = {
 	.battery_scale_avail = jz4725b_adc_battery_scale_avail,
 	.battery_scale_avail_size = ARRAY_SIZE(jz4725b_adc_battery_scale_avail),
 	.battery_vref_mode = true,
-	.has_aux2 = false,
+	.has_aux_md = false,
 	.channels = jz4740_channels,
 	.num_channels = ARRAY_SIZE(jz4740_channels),
 	.init_clk_div = jz4725b_adc_init_clk_div,
@@ -520,7 +520,7 @@ static const struct ingenic_adc_soc_data jz4740_adc_soc_data = {
 	.battery_scale_avail = jz4740_adc_battery_scale_avail,
 	.battery_scale_avail_size = ARRAY_SIZE(jz4740_adc_battery_scale_avail),
 	.battery_vref_mode = true,
-	.has_aux2 = false,
+	.has_aux_md = false,
 	.channels = jz4740_channels,
 	.num_channels = ARRAY_SIZE(jz4740_channels),
 	.init_clk_div = NULL, /* no ADCLK register on JZ4740 */
@@ -534,7 +534,7 @@ static const struct ingenic_adc_soc_data jz4770_adc_soc_data = {
 	.battery_scale_avail = jz4770_adc_battery_scale_avail,
 	.battery_scale_avail_size = ARRAY_SIZE(jz4770_adc_battery_scale_avail),
 	.battery_vref_mode = false,
-	.has_aux2 = true,
+	.has_aux_md = true,
 	.channels = jz4770_channels,
 	.num_channels = ARRAY_SIZE(jz4770_channels),
 	.init_clk_div = jz4770_adc_init_clk_div,
@@ -581,7 +581,7 @@ static int ingenic_adc_read_chan_info_raw(struct iio_dev *iio_dev,
 
 	/* We cannot sample AUX/AUX2 in parallel. */
 	mutex_lock(&adc->aux_lock);
-	if (adc->soc_data->has_aux2 && engine == 0) {
+	if (adc->soc_data->has_aux_md && engine == 0) {
 		bit = BIT(chan->channel == INGENIC_ADC_AUX2);
 		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, bit);
 	}
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH V2 2/5]  dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry
  2021-07-23  8:58         ` [PATCH V2 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic " Christophe Branchereau
  2021-07-23  8:58           ` [PATCH V2 1/5] iio/adc: ingenic: rename has_aux2 to has_aux_md Christophe Branchereau
@ 2021-07-23  8:58           ` Christophe Branchereau
  2021-07-23  8:58           ` [PATCH V2 3/5] iio/adc: ingenic: add JZ4760 support to the sadc driver Christophe Branchereau
                             ` (3 subsequent siblings)
  5 siblings, 0 replies; 29+ messages in thread
From: Christophe Branchereau @ 2021-07-23  8:58 UTC (permalink / raw)
  To: paul
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact, Christophe Branchereau

The JZ4760(B) socs have 3 AUX inputs, add an entry to prepare including
the one named AUX in the sadc driver.

Leaving the rest untouched as it's ABI.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
---
 include/dt-bindings/iio/adc/ingenic,adc.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/dt-bindings/iio/adc/ingenic,adc.h b/include/dt-bindings/iio/adc/ingenic,adc.h
index 4627a00e369e..a6ccc031635b 100644
--- a/include/dt-bindings/iio/adc/ingenic,adc.h
+++ b/include/dt-bindings/iio/adc/ingenic,adc.h
@@ -13,5 +13,6 @@
 #define INGENIC_ADC_TOUCH_YN	6
 #define INGENIC_ADC_TOUCH_XD	7
 #define INGENIC_ADC_TOUCH_YD	8
+#define INGENIC_ADC_AUX0	9
 
 #endif
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH V2 3/5] iio/adc: ingenic: add JZ4760 support to the sadc driver
  2021-07-23  8:58         ` [PATCH V2 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic " Christophe Branchereau
  2021-07-23  8:58           ` [PATCH V2 1/5] iio/adc: ingenic: rename has_aux2 to has_aux_md Christophe Branchereau
  2021-07-23  8:58           ` [PATCH V2 2/5] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry Christophe Branchereau
@ 2021-07-23  8:58           ` Christophe Branchereau
  2021-07-23  8:58           ` [PATCH V2 4/5] iio/adc: ingenic: add JZ4760B " Christophe Branchereau
                             ` (2 subsequent siblings)
  5 siblings, 0 replies; 29+ messages in thread
From: Christophe Branchereau @ 2021-07-23  8:58 UTC (permalink / raw)
  To: paul
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact, Christophe Branchereau

The jz4760 sadc is very similar to the jz4770 one, but has a VREF of 2.5V
and 3 aux channels.

modify ingenic_adc_read_chan_info_raw() needs a change to account for it.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
---
 drivers/iio/adc/ingenic-adc.c | 82 +++++++++++++++++++++++++++++++++--
 1 file changed, 78 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
index 40f2d8c2cf72..6b9af0530590 100644
--- a/drivers/iio/adc/ingenic-adc.c
+++ b/drivers/iio/adc/ingenic-adc.c
@@ -71,6 +71,7 @@
 #define JZ4725B_ADC_BATTERY_HIGH_VREF_BITS	10
 #define JZ4740_ADC_BATTERY_HIGH_VREF		(7500 * 0.986)
 #define JZ4740_ADC_BATTERY_HIGH_VREF_BITS	12
+#define JZ4760_ADC_BATTERY_VREF			2500
 #define JZ4770_ADC_BATTERY_VREF			1200
 #define JZ4770_ADC_BATTERY_VREF_BITS		12
 
@@ -295,6 +296,10 @@ static const int jz4740_adc_battery_scale_avail[] = {
 	JZ_ADC_BATTERY_LOW_VREF, JZ_ADC_BATTERY_LOW_VREF_BITS,
 };
 
+static const int jz4760_adc_battery_scale_avail[] = {
+	JZ4760_ADC_BATTERY_VREF, JZ4770_ADC_BATTERY_VREF_BITS,
+};
+
 static const int jz4770_adc_battery_raw_avail[] = {
 	0, 1, (1 << JZ4770_ADC_BATTERY_VREF_BITS) - 1,
 };
@@ -400,6 +405,47 @@ static const struct iio_chan_spec jz4740_channels[] = {
 	},
 };
 
+static const struct iio_chan_spec jz4760_channels[] = {
+	{
+		.extend_name = "aux",
+		.type = IIO_VOLTAGE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.indexed = 1,
+		.channel = INGENIC_ADC_AUX0,
+		.scan_index = -1,
+	},
+	{
+		.extend_name = "aux1",
+		.type = IIO_VOLTAGE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.indexed = 1,
+		.channel = INGENIC_ADC_AUX,
+		.scan_index = -1,
+	},
+	{
+		.extend_name = "aux2",
+		.type = IIO_VOLTAGE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.indexed = 1,
+		.channel = INGENIC_ADC_AUX2,
+		.scan_index = -1,
+	},
+	{
+		.extend_name = "battery",
+		.type = IIO_VOLTAGE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW) |
+						BIT(IIO_CHAN_INFO_SCALE),
+		.indexed = 1,
+		.channel = INGENIC_ADC_BATTERY,
+		.scan_index = -1,
+	},
+};
+
 static const struct iio_chan_spec jz4770_channels[] = {
 	{
 		.type = IIO_VOLTAGE,
@@ -526,6 +572,20 @@ static const struct ingenic_adc_soc_data jz4740_adc_soc_data = {
 	.init_clk_div = NULL, /* no ADCLK register on JZ4740 */
 };
 
+static const struct ingenic_adc_soc_data jz4760_adc_soc_data = {
+	.battery_high_vref = JZ4760_ADC_BATTERY_VREF,
+	.battery_high_vref_bits = JZ4770_ADC_BATTERY_VREF_BITS,
+	.battery_raw_avail = jz4770_adc_battery_raw_avail,
+	.battery_raw_avail_size = ARRAY_SIZE(jz4770_adc_battery_raw_avail),
+	.battery_scale_avail = jz4760_adc_battery_scale_avail,
+	.battery_scale_avail_size = ARRAY_SIZE(jz4760_adc_battery_scale_avail),
+	.battery_vref_mode = false,
+	.has_aux_md = true,
+	.channels = jz4760_channels,
+	.num_channels = ARRAY_SIZE(jz4760_channels),
+	.init_clk_div = jz4770_adc_init_clk_div,
+};
+
 static const struct ingenic_adc_soc_data jz4770_adc_soc_data = {
 	.battery_high_vref = JZ4770_ADC_BATTERY_VREF,
 	.battery_high_vref_bits = JZ4770_ADC_BATTERY_VREF_BITS,
@@ -569,7 +629,7 @@ static int ingenic_adc_read_chan_info_raw(struct iio_dev *iio_dev,
 					  struct iio_chan_spec const *chan,
 					  int *val)
 {
-	int bit, ret, engine = (chan->channel == INGENIC_ADC_BATTERY);
+	int cmd, ret, engine = (chan->channel == INGENIC_ADC_BATTERY);
 	struct ingenic_adc *adc = iio_priv(iio_dev);
 
 	ret = clk_enable(adc->clk);
@@ -579,11 +639,22 @@ static int ingenic_adc_read_chan_info_raw(struct iio_dev *iio_dev,
 		return ret;
 	}
 
-	/* We cannot sample AUX/AUX2 in parallel. */
+	/* We cannot sample the aux channels in parallel. */
 	mutex_lock(&adc->aux_lock);
 	if (adc->soc_data->has_aux_md && engine == 0) {
-		bit = BIT(chan->channel == INGENIC_ADC_AUX2);
-		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, bit);
+		switch (chan->channel) {
+		case INGENIC_ADC_AUX0:
+			cmd = 0;
+			break;
+		case INGENIC_ADC_AUX:
+			cmd = 1;
+			break;
+		case INGENIC_ADC_AUX2:
+			cmd = 2;
+			break;
+		}
+
+		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, cmd);
 	}
 
 	ret = ingenic_adc_capture(adc, engine);
@@ -591,6 +662,7 @@ static int ingenic_adc_read_chan_info_raw(struct iio_dev *iio_dev,
 		goto out;
 
 	switch (chan->channel) {
+	case INGENIC_ADC_AUX0:
 	case INGENIC_ADC_AUX:
 	case INGENIC_ADC_AUX2:
 		*val = readw(adc->base + JZ_ADC_REG_ADSDAT);
@@ -621,6 +693,7 @@ static int ingenic_adc_read_raw(struct iio_dev *iio_dev,
 		return ingenic_adc_read_chan_info_raw(iio_dev, chan, val);
 	case IIO_CHAN_INFO_SCALE:
 		switch (chan->channel) {
+		case INGENIC_ADC_AUX0:
 		case INGENIC_ADC_AUX:
 		case INGENIC_ADC_AUX2:
 			*val = JZ_ADC_AUX_VREF;
@@ -832,6 +905,7 @@ static int ingenic_adc_probe(struct platform_device *pdev)
 static const struct of_device_id ingenic_adc_of_match[] = {
 	{ .compatible = "ingenic,jz4725b-adc", .data = &jz4725b_adc_soc_data, },
 	{ .compatible = "ingenic,jz4740-adc", .data = &jz4740_adc_soc_data, },
+	{ .compatible = "ingenic,jz4760-adc", .data = &jz4760_adc_soc_data, },
 	{ .compatible = "ingenic,jz4770-adc", .data = &jz4770_adc_soc_data, },
 	{ },
 };
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH V2 4/5] iio/adc: ingenic: add JZ4760B support to the sadc driver
  2021-07-23  8:58         ` [PATCH V2 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic " Christophe Branchereau
                             ` (2 preceding siblings ...)
  2021-07-23  8:58           ` [PATCH V2 3/5] iio/adc: ingenic: add JZ4760 support to the sadc driver Christophe Branchereau
@ 2021-07-23  8:58           ` Christophe Branchereau
  2021-07-23 16:15             ` Jonathan Cameron
  2021-07-23  8:58           ` [PATCH V2 5/5] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation Christophe Branchereau
  2021-07-23 16:03           ` [PATCH V2 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic sadc driver Jonathan Cameron
  5 siblings, 1 reply; 29+ messages in thread
From: Christophe Branchereau @ 2021-07-23  8:58 UTC (permalink / raw)
  To: paul
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact, Christophe Branchereau

The JZ4760B variant differs slightly from the JZ4760: it has a bit called 
VBAT_SEL in the CFG register.

In order to correctly sample the battery voltage on existing handhelds 
using this SOC, the bit must be cleared.

We leave the possibility to set the bit, by adding the 
"ingenic,use-internal-divider" property to a devicetree.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
---
 drivers/iio/adc/ingenic-adc.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
index 6b9af0530590..09937c05d2af 100644
--- a/drivers/iio/adc/ingenic-adc.c
+++ b/drivers/iio/adc/ingenic-adc.c
@@ -37,6 +37,7 @@
 #define JZ_ADC_REG_CFG_SAMPLE_NUM(n)	((n) << 10)
 #define JZ_ADC_REG_CFG_PULL_UP(n)	((n) << 16)
 #define JZ_ADC_REG_CFG_CMD_SEL		BIT(22)
+#define JZ_ADC_REG_CFG_VBAT_SEL		BIT(30)
 #define JZ_ADC_REG_CFG_TOUCH_OPS_MASK	(BIT(31) | GENMASK(23, 10))
 #define JZ_ADC_REG_ADCLK_CLKDIV_LSB	0
 #define JZ4725B_ADC_REG_ADCLK_CLKDIV10US_LSB	16
@@ -879,6 +880,12 @@ static int ingenic_adc_probe(struct platform_device *pdev)
 	/* Put hardware in a known passive state. */
 	writeb(0x00, adc->base + JZ_ADC_REG_ENABLE);
 	writeb(0xff, adc->base + JZ_ADC_REG_CTRL);
+
+	if (device_property_present(dev, "ingenic,use-internal-divider")) /* JZ4760B specific */
+		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_VBAT_SEL, JZ_ADC_REG_CFG_VBAT_SEL);
+	else
+		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_VBAT_SEL, 0);
+
 	usleep_range(2000, 3000); /* Must wait at least 2ms. */
 	clk_disable(adc->clk);
 
@@ -906,6 +913,7 @@ static const struct of_device_id ingenic_adc_of_match[] = {
 	{ .compatible = "ingenic,jz4725b-adc", .data = &jz4725b_adc_soc_data, },
 	{ .compatible = "ingenic,jz4740-adc", .data = &jz4740_adc_soc_data, },
 	{ .compatible = "ingenic,jz4760-adc", .data = &jz4760_adc_soc_data, },
+	{ .compatible = "ingenic,jz4760b-adc", .data = &jz4760_adc_soc_data, },
 	{ .compatible = "ingenic,jz4770-adc", .data = &jz4770_adc_soc_data, },
 	{ },
 };
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* [PATCH V2 5/5] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  2021-07-23  8:58         ` [PATCH V2 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic " Christophe Branchereau
                             ` (3 preceding siblings ...)
  2021-07-23  8:58           ` [PATCH V2 4/5] iio/adc: ingenic: add JZ4760B " Christophe Branchereau
@ 2021-07-23  8:58           ` Christophe Branchereau
  2021-07-23 16:16             ` Jonathan Cameron
  2021-07-23 16:03           ` [PATCH V2 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic sadc driver Jonathan Cameron
  5 siblings, 1 reply; 29+ messages in thread
From: Christophe Branchereau @ 2021-07-23  8:58 UTC (permalink / raw)
  To: paul
  Cc: jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact, Christophe Branchereau

The jz4760b variant differs slightly from the jz4760, add a property to 
let users sample the internal divider if needed and document it.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
---
 .../devicetree/bindings/iio/adc/ingenic,adc.yaml         | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
index 433a3fb55a2e..0dc42959a64f 100644
--- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
@@ -23,6 +23,8 @@ properties:
     enum:
       - ingenic,jz4725b-adc
       - ingenic,jz4740-adc
+      - ingenic,jz4760-adc
+      - ingenic,jz4760b-adc
       - ingenic,jz4770-adc
 
   '#io-channel-cells':
@@ -43,6 +45,13 @@ properties:
   interrupts:
     maxItems: 1
 
+  ingenic,use-internal-divider:
+    description:
+      This property can be used to set VBAT_SEL in the JZ4760B CFG register
+      to sample the battery voltage from the internal divider. If absent, it
+      will sample the external divider.
+    type: boolean
+
 required:
   - compatible
   - '#io-channel-cells'
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 29+ messages in thread

* Re: [PATCH V2 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic sadc driver
  2021-07-23  8:58         ` [PATCH V2 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic " Christophe Branchereau
                             ` (4 preceding siblings ...)
  2021-07-23  8:58           ` [PATCH V2 5/5] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation Christophe Branchereau
@ 2021-07-23 16:03           ` Jonathan Cameron
  5 siblings, 0 replies; 29+ messages in thread
From: Jonathan Cameron @ 2021-07-23 16:03 UTC (permalink / raw)
  To: Christophe Branchereau
  Cc: paul, jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact

On Fri, 23 Jul 2021 10:58:08 +0200
Christophe Branchereau <cbranchereau@gmail.com> wrote:

> This is a set of patches to add support to the JZ4760(B) socs found in numerous gaming handhelds and some
> mp3 players.

Process note.  Please don't set the reply to for new revisions.
They nest deep inside threads when people read email that way and
it makes them hard to spot.  I'd much rather see them as a new
thread related only by the naming.

Thanks,

Jonathan

> 
> Christophe Branchereau (5):
>   iio/adc: ingenic: rename has_aux2 to has_aux_md
>   dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry
>   iio/adc: ingenic: add JZ4760 support to the sadc driver
>   iio/adc: ingenic: add JZ4760B support to the sadc driver
>   dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc
>     Documentation
> 


^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH 6/6] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  2021-07-21 19:17   ` Paul Cercueil
@ 2021-07-23 16:10     ` Jonathan Cameron
  0 siblings, 0 replies; 29+ messages in thread
From: Jonathan Cameron @ 2021-07-23 16:10 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: citral23, jic23, lars, linux-mips, linux-iio, linux-kernel,
	robh+dt, devicetree, linux, contact

On Wed, 21 Jul 2021 20:17:45 +0100
Paul Cercueil <paul@crapouillou.net> wrote:

> Hi Christophe,
> 
> Please always add a short description in your patches, even if all you 
> do is repeat the patch title.
> 
> 
> Le mer., juil. 21 2021 at 12:53:17 +0200, citral23 
> <cbranchereau@gmail.com> a écrit :
> > Signed-off-by: citral23 <cbranchereau@gmail.com>
> > ---
> >  .../devicetree/bindings/iio/adc/ingenic,adc.yaml         | 9 
> > +++++++++
> >  1 file changed, 9 insertions(+)
> > 
> > diff --git 
> > a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml 
> > b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
> > index 433a3fb55a2e..1b423adba61d 100644
> > --- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
> > +++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
> > @@ -23,6 +23,8 @@ properties:
> >      enum:
> >        - ingenic,jz4725b-adc
> >        - ingenic,jz4740-adc
> > +      - ingenic,jz4760-adc
> > +      - ingenic,jz4760b-adc
> >        - ingenic,jz4770-adc
> > 
> >    '#io-channel-cells':
> > @@ -43,6 +45,12 @@ properties:
> >    interrupts:
> >      maxItems: 1
> > 
> > +  ingenic,use-internal-divider:
> > +    description:
> > +      This property can be used to set VBAT_SEL in the JZ4760B CFG 
> > register
> > +      to sample the battery voltage from the internal divider. If 
> > absent, it
> > +      will sample the external divider.  
> 
> Please remove trailing spaces. And you don't need to describe internal 
> behaviour; you only need to explain the functionality in a user-facing 
> perspective. Something like:
> 
> "If present, battery voltage is read from the VBAT_IR pin, which has an 
> internal /4 divider. If absent, it is read through the VBAT_ER pin, 
> which does not have such divider."
> 
> You also don't specify the type of the property, please add "type: 
> boolean" before the description.
> 
> There should also be a way to make sure that this property can only be 
> used with the JZ4760B SoC. So a dependency for this vendor property on 
> the "ingenic,jz4760b-adc" compatible string. But I'm honestly not sure 
> how to express that... Maybe Rob can help.

Lots of examples in tree.
e.g.
https://elixir.bootlin.com/linux/v5.14-rc2/source/Documentation/devicetree/bindings/iio/st,st-sensors.yaml#L153

Basically you have an if block matching the compatible and for non matches
set it to false.  That combined with additionaProperties: false enforces
the property can't exist for those other devices.

> 
> > +
> >  required:
> >    - compatible
> >    - '#io-channel-cells'
> > @@ -53,6 +61,7 @@ required:
> > 
> >  additionalProperties: false
> > 
> > +  
> 
> Remove the extra newline.
> 
> Cheers,
> -Paul
> 
> >  examples:
> >    - |
> >      #include <dt-bindings/clock/jz4740-cgu.h>
> > --
> > 2.30.2
> >   
> 
> 


^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH 3/6] iio/adc: ingenic: add JZ4760 support to the sadc driver
  2021-07-21 18:15   ` Paul Cercueil
  2021-07-22  5:09     ` Christophe Branchereau
@ 2021-07-23 16:13     ` Jonathan Cameron
  1 sibling, 0 replies; 29+ messages in thread
From: Jonathan Cameron @ 2021-07-23 16:13 UTC (permalink / raw)
  To: Paul Cercueil
  Cc: citral23, jic23, lars, linux-mips, linux-iio, linux-kernel,
	robh+dt, devicetree, linux, contact

On Wed, 21 Jul 2021 19:15:47 +0100
Paul Cercueil <paul@crapouillou.net> wrote:

> Hi Christophe,
> 
> Le mer., juil. 21 2021 at 12:53:14 +0200, citral23 
> <cbranchereau@gmail.com> a écrit :
> > Signed-off-by: citral23 <cbranchereau@gmail.com>
> > ---
> >  drivers/iio/adc/ingenic-adc.c | 64 
> > +++++++++++++++++++++++++++++++++++
> >  1 file changed, 64 insertions(+)
> > 
> > diff --git a/drivers/iio/adc/ingenic-adc.c 
> > b/drivers/iio/adc/ingenic-adc.c
> > index 40f2d8c2cf72..285e7aa8e37a 100644
> > --- a/drivers/iio/adc/ingenic-adc.c
> > +++ b/drivers/iio/adc/ingenic-adc.c
> > @@ -71,6 +71,7 @@
> >  #define JZ4725B_ADC_BATTERY_HIGH_VREF_BITS	10
> >  #define JZ4740_ADC_BATTERY_HIGH_VREF		(7500 * 0.986)
> >  #define JZ4740_ADC_BATTERY_HIGH_VREF_BITS	12
> > +#define JZ4760_ADC_BATTERY_VREF			2500
> >  #define JZ4770_ADC_BATTERY_VREF			1200
> >  #define JZ4770_ADC_BATTERY_VREF_BITS		12
> > 
> > @@ -295,6 +296,10 @@ static const int 
> > jz4740_adc_battery_scale_avail[] = {
> >  	JZ_ADC_BATTERY_LOW_VREF, JZ_ADC_BATTERY_LOW_VREF_BITS,
> >  };
> > 
> > +static const int jz4760_adc_battery_scale_avail[] = {
> > +	JZ4760_ADC_BATTERY_VREF, JZ4770_ADC_BATTERY_VREF_BITS,
> > +};
> > +
> >  static const int jz4770_adc_battery_raw_avail[] = {
> >  	0, 1, (1 << JZ4770_ADC_BATTERY_VREF_BITS) - 1,
> >  };
> > @@ -339,6 +344,8 @@ static int jz4725b_adc_init_clk_div(struct device 
> > *dev, struct ingenic_adc *adc)
> >  	return 0;
> >  }
> > 
> > +
> > +  
> 
> Unrelated cosmetic change - remove it.
> 
> >  static int jz4770_adc_init_clk_div(struct device *dev, struct 
> > ingenic_adc *adc)
> >  {
> >  	struct clk *parent_clk;
> > @@ -400,6 +407,47 @@ static const struct iio_chan_spec 
> > jz4740_channels[] = {
> >  	},
> >  };
> > 
> > +static const struct iio_chan_spec jz4760_channels[] = {
> > +	{
> > +		.extend_name = "aux0",
> > +		.type = IIO_VOLTAGE,
> > +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > +				      BIT(IIO_CHAN_INFO_SCALE),
> > +		.indexed = 1,
> > +		.channel = INGENIC_ADC_AUX0,
> > +		.scan_index = -1,
> > +	},
> > +	{
> > +		.extend_name = "aux",
> > +		.type = IIO_VOLTAGE,
> > +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > +				      BIT(IIO_CHAN_INFO_SCALE),
> > +		.indexed = 1,
> > +		.channel = INGENIC_ADC_AUX,
> > +		.scan_index = -1,
> > +	},  
> 
> A couple of things. First, ".extend_name" is deprecated now... But 
> since the driver used it before, I suppose it doesn't make sense to use 
> labels just for this SoC (as we can't remove .extend_name for other 
> SoCs because of ABI). So I suppose it works here, but maybe Jonathan 
> disagrees.

Hmm. Interesting question.  We could attempt to force new device
support added to older drivers not to use extend_name but it seems
likely in this case at least, that the same board specific code might run
on this devices and the others, so I'll make an exception.

I'd be less keen if this was a stand alone ADC,

Jonathan

> 
> Also, you should probably use "aux1" as the channel's name instead of 
> "aux", independently of the macro name you used in the .channel field.
> 
> > +	{
> > +		.extend_name = "battery",
> > +		.type = IIO_VOLTAGE,
> > +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > +				      BIT(IIO_CHAN_INFO_SCALE),
> > +		.info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW) |
> > +						BIT(IIO_CHAN_INFO_SCALE),
> > +		.indexed = 1,
> > +		.channel = INGENIC_ADC_BATTERY,
> > +		.scan_index = -1,
> > +	},  
> 
> Swap the battery channel at the end, no? First the three AUX then the 
> battery channel?
> 
> The rest looks pretty good to me.
> 
> Cheers,
> -Paul
> 
> > +	{
> > +		.extend_name = "aux2",
> > +		.type = IIO_VOLTAGE,
> > +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > +				      BIT(IIO_CHAN_INFO_SCALE),
> > +		.indexed = 1,
> > +		.channel = INGENIC_ADC_AUX2,
> > +		.scan_index = -1,
> > +	},
> > +};
> > +
> >  static const struct iio_chan_spec jz4770_channels[] = {
> >  	{
> >  		.type = IIO_VOLTAGE,
> > @@ -526,6 +574,20 @@ static const struct ingenic_adc_soc_data 
> > jz4740_adc_soc_data = {
> >  	.init_clk_div = NULL, /* no ADCLK register on JZ4740 */
> >  };
> > 
> > +static const struct ingenic_adc_soc_data jz4760_adc_soc_data = {
> > +	.battery_high_vref = JZ4760_ADC_BATTERY_VREF,
> > +	.battery_high_vref_bits = JZ4770_ADC_BATTERY_VREF_BITS,
> > +	.battery_raw_avail = jz4770_adc_battery_raw_avail,
> > +	.battery_raw_avail_size = ARRAY_SIZE(jz4770_adc_battery_raw_avail),
> > +	.battery_scale_avail = jz4760_adc_battery_scale_avail,
> > +	.battery_scale_avail_size = 
> > ARRAY_SIZE(jz4760_adc_battery_scale_avail),
> > +	.battery_vref_mode = false,
> > +	.has_aux_md = true,
> > +	.channels = jz4760_channels,
> > +	.num_channels = ARRAY_SIZE(jz4760_channels),
> > +	.init_clk_div = jz4770_adc_init_clk_div,
> > +};
> > +
> >  static const struct ingenic_adc_soc_data jz4770_adc_soc_data = {
> >  	.battery_high_vref = JZ4770_ADC_BATTERY_VREF,
> >  	.battery_high_vref_bits = JZ4770_ADC_BATTERY_VREF_BITS,
> > @@ -621,6 +683,7 @@ static int ingenic_adc_read_raw(struct iio_dev 
> > *iio_dev,
> >  		return ingenic_adc_read_chan_info_raw(iio_dev, chan, val);
> >  	case IIO_CHAN_INFO_SCALE:
> >  		switch (chan->channel) {
> > +		case INGENIC_ADC_AUX0:
> >  		case INGENIC_ADC_AUX:
> >  		case INGENIC_ADC_AUX2:
> >  			*val = JZ_ADC_AUX_VREF;
> > @@ -832,6 +895,7 @@ static int ingenic_adc_probe(struct 
> > platform_device *pdev)
> >  static const struct of_device_id ingenic_adc_of_match[] = {
> >  	{ .compatible = "ingenic,jz4725b-adc", .data = 
> > &jz4725b_adc_soc_data, },
> >  	{ .compatible = "ingenic,jz4740-adc", .data = &jz4740_adc_soc_data, 
> > },
> > +	{ .compatible = "ingenic,jz4760-adc", .data = &jz4760_adc_soc_data, 
> > },
> >  	{ .compatible = "ingenic,jz4770-adc", .data = &jz4770_adc_soc_data, 
> > },
> >  	{ },
> >  };
> > --
> > 2.30.2
> >   
> 
> 


^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH V2 4/5] iio/adc: ingenic: add JZ4760B support to the sadc driver
  2021-07-23  8:58           ` [PATCH V2 4/5] iio/adc: ingenic: add JZ4760B " Christophe Branchereau
@ 2021-07-23 16:15             ` Jonathan Cameron
  0 siblings, 0 replies; 29+ messages in thread
From: Jonathan Cameron @ 2021-07-23 16:15 UTC (permalink / raw)
  To: Christophe Branchereau
  Cc: paul, jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact

On Fri, 23 Jul 2021 10:58:12 +0200
Christophe Branchereau <cbranchereau@gmail.com> wrote:

> The JZ4760B variant differs slightly from the JZ4760: it has a bit called 
> VBAT_SEL in the CFG register.
> 
> In order to correctly sample the battery voltage on existing handhelds 
> using this SOC, the bit must be cleared.
> 
> We leave the possibility to set the bit, by adding the 
> "ingenic,use-internal-divider" property to a devicetree.
> 
> Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>

One minor formatting comment inline.  If that is all that comes up in
review I can just change it whilst applying.

Jonathan

> ---
>  drivers/iio/adc/ingenic-adc.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
> index 6b9af0530590..09937c05d2af 100644
> --- a/drivers/iio/adc/ingenic-adc.c
> +++ b/drivers/iio/adc/ingenic-adc.c
> @@ -37,6 +37,7 @@
>  #define JZ_ADC_REG_CFG_SAMPLE_NUM(n)	((n) << 10)
>  #define JZ_ADC_REG_CFG_PULL_UP(n)	((n) << 16)
>  #define JZ_ADC_REG_CFG_CMD_SEL		BIT(22)
> +#define JZ_ADC_REG_CFG_VBAT_SEL		BIT(30)
>  #define JZ_ADC_REG_CFG_TOUCH_OPS_MASK	(BIT(31) | GENMASK(23, 10))
>  #define JZ_ADC_REG_ADCLK_CLKDIV_LSB	0
>  #define JZ4725B_ADC_REG_ADCLK_CLKDIV10US_LSB	16
> @@ -879,6 +880,12 @@ static int ingenic_adc_probe(struct platform_device *pdev)
>  	/* Put hardware in a known passive state. */
>  	writeb(0x00, adc->base + JZ_ADC_REG_ENABLE);
>  	writeb(0xff, adc->base + JZ_ADC_REG_CTRL);
> +
> +	if (device_property_present(dev, "ingenic,use-internal-divider")) /* JZ4760B specific */
> +		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_VBAT_SEL, JZ_ADC_REG_CFG_VBAT_SEL);
Please break this line and move the comment on the one above.

Whilst we have relaxed the kernel style to allow longer lines, it's nice
to still keep them to the 80 char limit when it doesn't really hurt readability.
Here I don't think it would make much difference.

> +	else
> +		ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_VBAT_SEL, 0);
> +
>  	usleep_range(2000, 3000); /* Must wait at least 2ms. */
>  	clk_disable(adc->clk);
>  
> @@ -906,6 +913,7 @@ static const struct of_device_id ingenic_adc_of_match[] = {
>  	{ .compatible = "ingenic,jz4725b-adc", .data = &jz4725b_adc_soc_data, },
>  	{ .compatible = "ingenic,jz4740-adc", .data = &jz4740_adc_soc_data, },
>  	{ .compatible = "ingenic,jz4760-adc", .data = &jz4760_adc_soc_data, },
> +	{ .compatible = "ingenic,jz4760b-adc", .data = &jz4760_adc_soc_data, },
>  	{ .compatible = "ingenic,jz4770-adc", .data = &jz4770_adc_soc_data, },
>  	{ },
>  };


^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH V2 5/5] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  2021-07-23  8:58           ` [PATCH V2 5/5] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation Christophe Branchereau
@ 2021-07-23 16:16             ` Jonathan Cameron
  2021-07-24  7:33               ` Christophe Branchereau
  0 siblings, 1 reply; 29+ messages in thread
From: Jonathan Cameron @ 2021-07-23 16:16 UTC (permalink / raw)
  To: Christophe Branchereau
  Cc: paul, jic23, lars, linux-mips, linux-iio, linux-kernel, robh+dt,
	devicetree, linux, contact

On Fri, 23 Jul 2021 10:58:13 +0200
Christophe Branchereau <cbranchereau@gmail.com> wrote:

> The jz4760b variant differs slightly from the jz4760, add a property to 
> let users sample the internal divider if needed and document it.
> 
> Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
> ---
>  .../devicetree/bindings/iio/adc/ingenic,adc.yaml         | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
> index 433a3fb55a2e..0dc42959a64f 100644
> --- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
> @@ -23,6 +23,8 @@ properties:
>      enum:
>        - ingenic,jz4725b-adc
>        - ingenic,jz4740-adc
> +      - ingenic,jz4760-adc
> +      - ingenic,jz4760b-adc
>        - ingenic,jz4770-adc
>  
>    '#io-channel-cells':
> @@ -43,6 +45,13 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> +  ingenic,use-internal-divider:
> +    description:
> +      This property can be used to set VBAT_SEL in the JZ4760B CFG register
> +      to sample the battery voltage from the internal divider. If absent, it
> +      will sample the external divider.
> +    type: boolean
> +
See reply to the v1 patch for hint on how to 'enforce' that this
only exists for the jz4760b

Thanks,

Jonathan

>  required:
>    - compatible
>    - '#io-channel-cells'


^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH V2 5/5] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  2021-07-23 16:16             ` Jonathan Cameron
@ 2021-07-24  7:33               ` Christophe Branchereau
  2021-07-24 15:23                 ` Jonathan Cameron
  0 siblings, 1 reply; 29+ messages in thread
From: Christophe Branchereau @ 2021-07-24  7:33 UTC (permalink / raw)
  To: Jonathan Cameron
  Cc: Paul Cercueil, jic23, lars, linux-mips, linux-iio, linux-kernel,
	robh+dt, devicetree, linux, contact

Hello Johnathan, am I allowed to declare the property within the if
block like this?

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2019-2020 Artur Rojek
%YAML 1.2
---
$id: "http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"

title: Ingenic JZ47xx ADC controller IIO bindings

maintainers:
  - Artur Rojek <contact@artur-rojek.eu>

description: >
  Industrial I/O subsystem bindings for ADC controller found in
  Ingenic JZ47xx SoCs.

  ADC clients must use the format described in
  https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml,
  giving a phandle and IIO specifier pair ("io-channels") to the ADC controller.

properties:
  compatible:
    enum:
      - ingenic,jz4725b-adc
      - ingenic,jz4740-adc
      - ingenic,jz4760-adc
      - ingenic,jz4760b-adc
      - ingenic,jz4770-adc

  '#io-channel-cells':
    const: 1
    description:
      Must be set to <1> to indicate channels are selected by index.

  reg:
    maxItems: 1

  clocks:
    maxItems: 1

  clock-names:
    items:
      - const: adc

  interrupts:
    maxItems: 1

allOf:
  - if:
      properties:
        compatible:
          contains:
            enum:
              - ingenic,jz4760b-adc
then:
  properties:
    ingenic,use-internal-divider:
      description:
        If present, battery voltage is read from the VBAT_IR pin, which has an
        internal 1/4 divider. If absent, it is read through the VBAT_ER pin,
        which does not have such a divider.
      type: boolean

required:
  - compatible
  - '#io-channel-cells'
  - reg
  - clocks
  - clock-names
  - interrupts

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/jz4740-cgu.h>
    #include <dt-bindings/iio/adc/ingenic,adc.h>

    adc@10070000 {
            compatible = "ingenic,jz4740-adc";
            #io-channel-cells = <1>;

            reg = <0x10070000 0x30>;

            clocks = <&cgu JZ4740_CLK_ADC>;
            clock-names = "adc";

            interrupt-parent = <&intc>;
            interrupts = <18>;
    };

On Fri, Jul 23, 2021 at 6:17 PM Jonathan Cameron
<Jonathan.Cameron@huawei.com> wrote:
>
> On Fri, 23 Jul 2021 10:58:13 +0200
> Christophe Branchereau <cbranchereau@gmail.com> wrote:
>
> > The jz4760b variant differs slightly from the jz4760, add a property to
> > let users sample the internal divider if needed and document it.
> >
> > Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
> > ---
> >  .../devicetree/bindings/iio/adc/ingenic,adc.yaml         | 9 +++++++++
> >  1 file changed, 9 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
> > index 433a3fb55a2e..0dc42959a64f 100644
> > --- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
> > +++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
> > @@ -23,6 +23,8 @@ properties:
> >      enum:
> >        - ingenic,jz4725b-adc
> >        - ingenic,jz4740-adc
> > +      - ingenic,jz4760-adc
> > +      - ingenic,jz4760b-adc
> >        - ingenic,jz4770-adc
> >
> >    '#io-channel-cells':
> > @@ -43,6 +45,13 @@ properties:
> >    interrupts:
> >      maxItems: 1
> >
> > +  ingenic,use-internal-divider:
> > +    description:
> > +      This property can be used to set VBAT_SEL in the JZ4760B CFG register
> > +      to sample the battery voltage from the internal divider. If absent, it
> > +      will sample the external divider.
> > +    type: boolean
> > +
> See reply to the v1 patch for hint on how to 'enforce' that this
> only exists for the jz4760b
>
> Thanks,
>
> Jonathan
>
> >  required:
> >    - compatible
> >    - '#io-channel-cells'
>

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [PATCH V2 5/5] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation
  2021-07-24  7:33               ` Christophe Branchereau
@ 2021-07-24 15:23                 ` Jonathan Cameron
  0 siblings, 0 replies; 29+ messages in thread
From: Jonathan Cameron @ 2021-07-24 15:23 UTC (permalink / raw)
  To: Christophe Branchereau
  Cc: Jonathan Cameron, Paul Cercueil, lars, linux-mips, linux-iio,
	linux-kernel, robh+dt, devicetree, linux, contact

On Sat, 24 Jul 2021 09:33:46 +0200
Christophe Branchereau <cbranchereau@gmail.com> wrote:

> Hello Johnathan, am I allowed to declare the property within the if
> block like this?

Test it...

Short answer is no you aren't.  As someone explained it to me the other
day, each layer of the yaml is checked independently so if you declare
a property in the if block and not the outer layer the additionalProperties
check will fail should it be present.

So declare it outside, then set it false for the cases where it's not valid.

Jonathan

> 
> # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> # Copyright 2019-2020 Artur Rojek
> %YAML 1.2
> ---
> $id: "http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#"
> $schema: "http://devicetree.org/meta-schemas/core.yaml#"
> 
> title: Ingenic JZ47xx ADC controller IIO bindings
> 
> maintainers:
>   - Artur Rojek <contact@artur-rojek.eu>
> 
> description: >
>   Industrial I/O subsystem bindings for ADC controller found in
>   Ingenic JZ47xx SoCs.
> 
>   ADC clients must use the format described in
>   https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml,
>   giving a phandle and IIO specifier pair ("io-channels") to the ADC controller.
> 
> properties:
>   compatible:
>     enum:
>       - ingenic,jz4725b-adc
>       - ingenic,jz4740-adc
>       - ingenic,jz4760-adc
>       - ingenic,jz4760b-adc
>       - ingenic,jz4770-adc
> 
>   '#io-channel-cells':
>     const: 1
>     description:
>       Must be set to <1> to indicate channels are selected by index.
> 
>   reg:
>     maxItems: 1
> 
>   clocks:
>     maxItems: 1
> 
>   clock-names:
>     items:
>       - const: adc
> 
>   interrupts:
>     maxItems: 1
> 
> allOf:
>   - if:
>       properties:
>         compatible:
>           contains:
>             enum:
>               - ingenic,jz4760b-adc
> then:
>   properties:
>     ingenic,use-internal-divider:
>       description:
>         If present, battery voltage is read from the VBAT_IR pin, which has an
>         internal 1/4 divider. If absent, it is read through the VBAT_ER pin,
>         which does not have such a divider.
>       type: boolean
> 
> required:
>   - compatible
>   - '#io-channel-cells'
>   - reg
>   - clocks
>   - clock-names
>   - interrupts
> 
> additionalProperties: false
> 
> examples:
>   - |
>     #include <dt-bindings/clock/jz4740-cgu.h>
>     #include <dt-bindings/iio/adc/ingenic,adc.h>
> 
>     adc@10070000 {
>             compatible = "ingenic,jz4740-adc";
>             #io-channel-cells = <1>;
> 
>             reg = <0x10070000 0x30>;
> 
>             clocks = <&cgu JZ4740_CLK_ADC>;
>             clock-names = "adc";
> 
>             interrupt-parent = <&intc>;
>             interrupts = <18>;
>     };
> 
> On Fri, Jul 23, 2021 at 6:17 PM Jonathan Cameron
> <Jonathan.Cameron@huawei.com> wrote:
> >
> > On Fri, 23 Jul 2021 10:58:13 +0200
> > Christophe Branchereau <cbranchereau@gmail.com> wrote:
> >  
> > > The jz4760b variant differs slightly from the jz4760, add a property to
> > > let users sample the internal divider if needed and document it.
> > >
> > > Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
> > > ---
> > >  .../devicetree/bindings/iio/adc/ingenic,adc.yaml         | 9 +++++++++
> > >  1 file changed, 9 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
> > > index 433a3fb55a2e..0dc42959a64f 100644
> > > --- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
> > > +++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
> > > @@ -23,6 +23,8 @@ properties:
> > >      enum:
> > >        - ingenic,jz4725b-adc
> > >        - ingenic,jz4740-adc
> > > +      - ingenic,jz4760-adc
> > > +      - ingenic,jz4760b-adc
> > >        - ingenic,jz4770-adc
> > >
> > >    '#io-channel-cells':
> > > @@ -43,6 +45,13 @@ properties:
> > >    interrupts:
> > >      maxItems: 1
> > >
> > > +  ingenic,use-internal-divider:
> > > +    description:
> > > +      This property can be used to set VBAT_SEL in the JZ4760B CFG register
> > > +      to sample the battery voltage from the internal divider. If absent, it
> > > +      will sample the external divider.
> > > +    type: boolean
> > > +  
> > See reply to the v1 patch for hint on how to 'enforce' that this
> > only exists for the jz4760b
> >
> > Thanks,
> >
> > Jonathan
> >  
> > >  required:
> > >    - compatible
> > >    - '#io-channel-cells'  
> >  


^ permalink raw reply	[flat|nested] 29+ messages in thread

end of thread, other threads:[~2021-07-24 15:20 UTC | newest]

Thread overview: 29+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-21 10:53 [PATCH] Ingenic: iio/adc: add JZ4760(B) support to the citral23
2021-07-21 10:53 ` [PATCH 1/6] iio/adc: ingenic: rename has_aux2 to has_aux_md citral23
2021-07-21 17:46   ` Paul Cercueil
2021-07-21 10:53 ` [PATCH 2/6] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry citral23
2021-07-21 17:46   ` Paul Cercueil
2021-07-21 10:53 ` [PATCH 3/6] iio/adc: ingenic: add JZ4760 support to the sadc driver citral23
2021-07-21 18:15   ` Paul Cercueil
2021-07-22  5:09     ` Christophe Branchereau
2021-07-22  5:23       ` Guenter Roeck
2021-07-23  8:58         ` [PATCH V2 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic " Christophe Branchereau
2021-07-23  8:58           ` [PATCH V2 1/5] iio/adc: ingenic: rename has_aux2 to has_aux_md Christophe Branchereau
2021-07-23  8:58           ` [PATCH V2 2/5] dt-bindings: iio/adc: add an INGENIC_ADC_AUX0 entry Christophe Branchereau
2021-07-23  8:58           ` [PATCH V2 3/5] iio/adc: ingenic: add JZ4760 support to the sadc driver Christophe Branchereau
2021-07-23  8:58           ` [PATCH V2 4/5] iio/adc: ingenic: add JZ4760B " Christophe Branchereau
2021-07-23 16:15             ` Jonathan Cameron
2021-07-23  8:58           ` [PATCH V2 5/5] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation Christophe Branchereau
2021-07-23 16:16             ` Jonathan Cameron
2021-07-24  7:33               ` Christophe Branchereau
2021-07-24 15:23                 ` Jonathan Cameron
2021-07-23 16:03           ` [PATCH V2 0/5] iio/adc: ingenic: add support for the JZ4760(B) Socs to the ingenic sadc driver Jonathan Cameron
2021-07-23 16:13     ` [PATCH 3/6] iio/adc: ingenic: add JZ4760 support to the " Jonathan Cameron
2021-07-21 10:53 ` [PATCH 4/6] iio/adc: ingenic: add JZ4760B " citral23
2021-07-21 18:24   ` Paul Cercueil
2021-07-21 10:53 ` [PATCH 5/6] iio/adc: ingenic: modify citral23
2021-07-21 18:28   ` Paul Cercueil
2021-07-21 10:53 ` [PATCH 6/6] dt-bindings: iio/adc: ingenic: add the JZ4760(B) socs to the sadc Documentation citral23
2021-07-21 19:17   ` Paul Cercueil
2021-07-23 16:10     ` Jonathan Cameron
2021-07-22  2:09   ` Rob Herring

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).