linux-mips.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paul Cercueil <paul@crapouillou.net>
To: 周琰杰 <zhouyanjie@wanyeetech.com>
Cc: daniel.lezcano@linaro.org, tglx@linutronix.de,
	linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
	dongsheng.qiu@ingenic.com, aric.pzqi@ingenic.com,
	rick.tyliu@ingenic.com, sihui.liu@ingenic.com,
	jun.jiang@ingenic.com, sernia.zhou@foxmail.com
Subject: Re: [PATCH] clocksource: Ingenic: Improve the code.
Date: Sat, 24 Jul 2021 12:54:24 +0100	[thread overview]
Message-ID: <OQZQWQ.MUGEDOGBXJW12@crapouillou.net> (raw)
In-Reply-To: <1627121407-131028-1-git-send-email-zhouyanjie@wanyeetech.com>

Hi Zhou,

Thanks! I actually had a similar patch locally that I was eventually 
going to send.


Le sam., juil. 24 2021 at 18:10:07 +0800, 周琰杰 (Zhou Yanjie) 
<zhouyanjie@wanyeetech.com> a écrit :
> Use "FIELD_GET()" and "FIELD_PREP()" to simplify the code.
> 
> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
> ---
>  drivers/clocksource/ingenic-sysost.c | 11 +++++------
>  1 file changed, 5 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/clocksource/ingenic-sysost.c 
> b/drivers/clocksource/ingenic-sysost.c
> index a129840..1fbea59 100644
> --- a/drivers/clocksource/ingenic-sysost.c
> +++ b/drivers/clocksource/ingenic-sysost.c
> @@ -4,6 +4,7 @@
>   * Copyright (c) 2020 周琰杰 (Zhou Yanjie) 
> <zhouyanjie@wanyeetech.com>
>   */
> 
> +#include <linux/bitfield.h>
>  #include <linux/bitops.h>
>  #include <linux/clk.h>
>  #include <linux/clk-provider.h>
> @@ -34,8 +35,6 @@
>  /* bits within the OSTCCR register */
>  #define OSTCCR_PRESCALE1_MASK	0x3
>  #define OSTCCR_PRESCALE2_MASK	0xc
> -#define OSTCCR_PRESCALE1_LSB	0
> -#define OSTCCR_PRESCALE2_LSB	2
> 
>  /* bits within the OSTCR register */
>  #define OSTCR_OST1CLR			BIT(0)
> @@ -98,7 +97,7 @@ static unsigned long 
> ingenic_ost_percpu_timer_recalc_rate(struct clk_hw *hw,
> 
>  	prescale = readl(ost_clk->ost->base + info->ostccr_reg);
> 
> -	prescale = (prescale & OSTCCR_PRESCALE1_MASK) >> 
> OSTCCR_PRESCALE1_LSB;
> +	prescale = FIELD_GET(OSTCCR_PRESCALE1_MASK, prescale);
> 
>  	return parent_rate >> (prescale * 2);
>  }
> @@ -112,7 +111,7 @@ static unsigned long 
> ingenic_ost_global_timer_recalc_rate(struct clk_hw *hw,
> 
>  	prescale = readl(ost_clk->ost->base + info->ostccr_reg);
> 
> -	prescale = (prescale & OSTCCR_PRESCALE2_MASK) >> 
> OSTCCR_PRESCALE2_LSB;
> +	prescale = FIELD_GET(OSTCCR_PRESCALE2_MASK, prescale);
> 
>  	return parent_rate >> (prescale * 2);
>  }
> @@ -151,7 +150,7 @@ static int 
> ingenic_ost_percpu_timer_set_rate(struct clk_hw *hw, unsigned long re
>  	int val;
> 
>  	val = readl(ost_clk->ost->base + info->ostccr_reg);
> -	val = (val & ~OSTCCR_PRESCALE1_MASK) | (prescale << 
> OSTCCR_PRESCALE1_LSB);
> +	val = (val & ~OSTCCR_PRESCALE1_MASK) | 
> FIELD_PREP(OSTCCR_PRESCALE1_MASK, prescale);

Just one nitpick, I'd prefer this:

val ~= &OSTCCR_PRESCALE1_MASK;
val |= FIELD_PREP(OSTCCR_PRESCALE1_MASK, prescale);

>  	writel(val, ost_clk->ost->base + info->ostccr_reg);
> 
>  	return 0;
> @@ -166,7 +165,7 @@ static int 
> ingenic_ost_global_timer_set_rate(struct clk_hw *hw, unsigned long re
>  	int val;
> 
>  	val = readl(ost_clk->ost->base + info->ostccr_reg);
> -	val = (val & ~OSTCCR_PRESCALE2_MASK) | (prescale << 
> OSTCCR_PRESCALE2_LSB);
> +	val = (val & ~OSTCCR_PRESCALE2_MASK) | 
> FIELD_PREP(OSTCCR_PRESCALE2_MASK, prescale);

Same here.

Cheers,
-Paul

>  	writel(val, ost_clk->ost->base + info->ostccr_reg);
> 
>  	return 0;
> --
> 2.7.4
> 



  reply	other threads:[~2021-07-24 11:54 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-24 10:10 [PATCH] clocksource: Ingenic: Improve the code 周琰杰 (Zhou Yanjie)
2021-07-24 11:54 ` Paul Cercueil [this message]
2021-07-24 15:38   ` Zhou Yanjie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=OQZQWQ.MUGEDOGBXJW12@crapouillou.net \
    --to=paul@crapouillou.net \
    --cc=aric.pzqi@ingenic.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=dongsheng.qiu@ingenic.com \
    --cc=jun.jiang@ingenic.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=rick.tyliu@ingenic.com \
    --cc=sernia.zhou@foxmail.com \
    --cc=sihui.liu@ingenic.com \
    --cc=tglx@linutronix.de \
    --cc=zhouyanjie@wanyeetech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).