linux-mips.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH V4 RESEND] dmaengine: Loongson1: Add Loongson1 dmaengine driver
@ 2021-05-20 23:02 Keguang Zhang
  2021-06-07 11:07 ` Vinod Koul
  0 siblings, 1 reply; 4+ messages in thread
From: Keguang Zhang @ 2021-05-20 23:02 UTC (permalink / raw)
  To: dmaengine, linux-mips, linux-kernel; +Cc: Vinod Koul, Kelvin Cheung

From: Kelvin Cheung <keguang.zhang@gmail.com>

This patch adds DMA Engine driver for Loongson1B.

Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
---
V3 -> V4:
   Use dma_slave_map to find the proper channel.
   Explicitly call devm_request_irq() and tasklet_kill().
   Fix namespace issue.
   Some minor fixes and cleanups.
V2 -> V3:
   Rename ls1x_dma_filter_fn to ls1x_dma_filter.
V1 -> V2:
   Change the config from 'DMA_LOONGSON1' to 'LOONGSON1_DMA',
   and rearrange it in alphabetical order in Kconfig and Makefile.
   Fix comment style.
---
 drivers/dma/Kconfig         |   9 +
 drivers/dma/Makefile        |   1 +
 drivers/dma/loongson1-dma.c | 514 ++++++++++++++++++++++++++++++++++++
 3 files changed, 524 insertions(+)
 create mode 100644 drivers/dma/loongson1-dma.c

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 6ab9d9a488a6..b3ceeae61483 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -343,6 +343,15 @@ config K3_DMA
 	  Support the DMA engine for Hisilicon K3 platform
 	  devices.
 
+config LOONGSON1_DMA
+	tristate "Loongson1 DMA support"
+	depends on MACH_LOONGSON32
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  This selects support for the DMA controller in Loongson1 SoCs,
+	  and is required by Loongson1 NAND controller and AC97 support.
+
 config LPC18XX_DMAMUX
 	bool "NXP LPC18xx/43xx DMA MUX for PL080"
 	depends on ARCH_LPC18XX || COMPILE_TEST
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index aa69094e3547..6d54e485036e 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_INTEL_IOATDMA) += ioat/
 obj-$(CONFIG_INTEL_IDXD) += idxd/
 obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
 obj-$(CONFIG_K3_DMA) += k3dma.o
+obj-$(CONFIG_LOONGSON1_DMA) += loongson1-dma.o
 obj-$(CONFIG_LPC18XX_DMAMUX) += lpc18xx-dmamux.o
 obj-$(CONFIG_MILBEAUT_HDMAC) += milbeaut-hdmac.o
 obj-$(CONFIG_MILBEAUT_XDMAC) += milbeaut-xdmac.o
diff --git a/drivers/dma/loongson1-dma.c b/drivers/dma/loongson1-dma.c
new file mode 100644
index 000000000000..5899509125fe
--- /dev/null
+++ b/drivers/dma/loongson1-dma.c
@@ -0,0 +1,514 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DMA Driver for Loongson 1 SoC
+ *
+ * Copyright (C) 2015-2021 Zhang, Keguang <keguang.zhang@gmail.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/dmapool.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_dma.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <dma.h>
+
+#include "dmaengine.h"
+#include "virt-dma.h"
+
+/* Loongson 1 DMA Register Definitions */
+#define LS1X_DMA_CTRL		0x0
+
+/* DMA Control Register Bits */
+#define LS1X_DMA_STOP		BIT(4)
+#define LS1X_DMA_START		BIT(3)
+
+#define LS1X_DMA_ADDR_MASK	GENMASK(31, 6)
+
+/* DMA Command Register Bits */
+#define LS1X_DMA_RAM2DEV		BIT(12)
+#define LS1X_DMA_TRANS_OVER		BIT(3)
+#define LS1X_DMA_SINGLE_TRANS_OVER	BIT(2)
+#define LS1X_DMA_INT			BIT(1)
+#define LS1X_DMA_INT_MASK		BIT(0)
+
+struct ls1x_dma_lli {
+	u32 next;		/* next descriptor address */
+	u32 saddr;		/* memory DMA address */
+	u32 daddr;		/* device DMA address */
+	u32 length;
+	u32 stride;
+	u32 cycles;
+	u32 cmd;
+} __aligned(64);
+
+struct ls1x_dma_hwdesc {
+	struct ls1x_dma_lli *lli;
+	dma_addr_t phys;
+};
+
+struct ls1x_dma_desc {
+	struct virt_dma_desc vdesc;
+	struct ls1x_dma_chan *chan;
+
+	enum dma_transfer_direction dir;
+	enum dma_transaction_type type;
+
+	unsigned int nr_descs;	/* number of descriptors */
+	unsigned int nr_done;	/* number of completed descriptors */
+	struct ls1x_dma_hwdesc hwdesc[];	/* DMA coherent descriptors */
+};
+
+struct ls1x_dma_chan {
+	struct virt_dma_chan vchan;
+	struct dma_pool *desc_pool;
+	struct dma_slave_config cfg;
+
+	unsigned int id;
+	void __iomem *reg_base;
+	unsigned int irq;
+
+	struct ls1x_dma_desc *desc;
+};
+
+struct ls1x_dma {
+	struct dma_device ddev;
+	struct clk *clk;
+	void __iomem *reg_base;
+
+	unsigned int nr_chans;
+	struct ls1x_dma_chan chan[];
+};
+
+#define to_ls1x_dma_chan(dchan)		\
+	container_of(dchan, struct ls1x_dma_chan, vchan.chan)
+
+#define to_ls1x_dma_desc(vdesc)		\
+	container_of(vdesc, struct ls1x_dma_desc, vdesc)
+
+/* macros for registers read/write */
+#define chan_readl(chan, off)		\
+	readl((chan)->reg_base + (off))
+
+#define chan_writel(chan, off, val)	\
+	writel((val), (chan)->reg_base + (off))
+
+static bool ls1x_dma_filter(struct dma_chan *chan, void *param);
+
+static inline struct device *chan2dev(struct dma_chan *chan)
+{
+	return &chan->dev->device;
+}
+
+static void ls1x_dma_free_chan_resources(struct dma_chan *dchan)
+{
+	struct ls1x_dma_chan *chan = to_ls1x_dma_chan(dchan);
+
+	vchan_free_chan_resources(&chan->vchan);
+	dma_pool_destroy(chan->desc_pool);
+	chan->desc_pool = NULL;
+}
+
+static int ls1x_dma_alloc_chan_resources(struct dma_chan *dchan)
+{
+	struct ls1x_dma_chan *chan = to_ls1x_dma_chan(dchan);
+
+	chan->desc_pool = dma_pool_create(dma_chan_name(dchan),
+					  dchan->device->dev,
+					  sizeof(struct ls1x_dma_lli),
+					  __alignof__(struct ls1x_dma_lli), 0);
+	if (!chan->desc_pool) {
+		dev_err(chan2dev(dchan),
+			"failed to alloc DMA descriptor pool!\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void ls1x_dma_free_desc(struct virt_dma_desc *vdesc)
+{
+	struct ls1x_dma_desc *desc = to_ls1x_dma_desc(vdesc);
+
+	if (desc->nr_descs) {
+		unsigned int i = desc->nr_descs;
+		struct ls1x_dma_hwdesc *hwdesc;
+
+		do {
+			hwdesc = &desc->hwdesc[--i];
+			dma_pool_free(desc->chan->desc_pool, hwdesc->lli,
+				      hwdesc->phys);
+		} while (i);
+	}
+
+	kfree(desc);
+}
+
+static struct ls1x_dma_desc *ls1x_dma_alloc_desc(struct ls1x_dma_chan *chan,
+						 int sg_len)
+{
+	struct ls1x_dma_desc *desc;
+	struct dma_chan *dchan = &chan->vchan.chan;
+
+	desc = kzalloc(struct_size(desc, hwdesc, sg_len), GFP_NOWAIT);
+	if (!desc)
+		dev_err(chan2dev(dchan), "failed to alloc DMA descriptor!\n");
+
+	return desc;
+}
+
+static struct dma_async_tx_descriptor *
+ls1x_dma_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
+		       unsigned int sg_len,
+		       enum dma_transfer_direction direction,
+		       unsigned long flags, void *context)
+{
+	struct ls1x_dma_chan *chan = to_ls1x_dma_chan(dchan);
+	struct dma_slave_config *cfg = &chan->cfg;
+	struct ls1x_dma_desc *desc;
+	struct scatterlist *sg;
+	unsigned int dev_addr, bus_width, cmd, i;
+
+	if (!is_slave_direction(direction)) {
+		dev_err(chan2dev(dchan), "invalid DMA direction!\n");
+		return NULL;
+	}
+
+	dev_dbg(chan2dev(dchan), "sg_len=%d, dir=%s, flags=0x%lx\n", sg_len,
+		direction == DMA_MEM_TO_DEV ? "to device" : "from device",
+		flags);
+
+	switch (direction) {
+	case DMA_MEM_TO_DEV:
+		dev_addr = cfg->dst_addr;
+		bus_width = cfg->dst_addr_width;
+		cmd = LS1X_DMA_RAM2DEV | LS1X_DMA_INT;
+		break;
+	case DMA_DEV_TO_MEM:
+		dev_addr = cfg->src_addr;
+		bus_width = cfg->src_addr_width;
+		cmd = LS1X_DMA_INT;
+		break;
+	default:
+		dev_err(chan2dev(dchan),
+			"unsupported DMA transfer mode! %d\n", direction);
+		return NULL;
+	}
+
+	/* allocate DMA descriptor */
+	desc = ls1x_dma_alloc_desc(chan, sg_len);
+	if (!desc)
+		return NULL;
+
+	for_each_sg(sgl, sg, sg_len, i) {
+		dma_addr_t buf_addr = sg_dma_address(sg);
+		size_t buf_len = sg_dma_len(sg);
+		struct ls1x_dma_hwdesc *hwdesc = &desc->hwdesc[i];
+		struct ls1x_dma_lli *lli;
+
+		if (!is_dma_copy_aligned(dchan->device, buf_addr, 0, buf_len)) {
+			dev_err(chan2dev(dchan), "%s: buffer is not aligned!\n",
+				__func__);
+			goto err;
+		}
+
+		/* allocate HW DMA descriptors */
+		lli = dma_pool_alloc(chan->desc_pool, GFP_NOWAIT,
+				     &hwdesc->phys);
+		if (!lli) {
+			dev_err(chan2dev(dchan),
+				"%s: failed to alloc HW DMA descriptor!\n",
+				__func__);
+			goto err;
+		}
+		hwdesc->lli = lli;
+
+		/* config HW DMA descriptors */
+		lli->saddr = buf_addr;
+		lli->daddr = dev_addr;
+		lli->length = buf_len / bus_width;
+		lli->stride = 0;
+		lli->cycles = 1;
+		lli->cmd = cmd;
+		lli->next = 0;
+
+		if (i)
+			desc->hwdesc[i - 1].lli->next = hwdesc->phys;
+
+		dev_dbg(chan2dev(dchan),
+			"hwdesc=%px, saddr=%08x, daddr=%08x, length=%u\n",
+			hwdesc, buf_addr, dev_addr, buf_len);
+	}
+
+	/* config DMA descriptor */
+	desc->chan = chan;
+	desc->dir = direction;
+	desc->type = DMA_SLAVE;
+	desc->nr_descs = sg_len;
+	desc->nr_done = 0;
+
+	return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
+err:
+	desc->nr_descs = i;
+	ls1x_dma_free_desc(&desc->vdesc);
+	return NULL;
+}
+
+static int ls1x_dma_slave_config(struct dma_chan *dchan,
+				 struct dma_slave_config *config)
+{
+	struct ls1x_dma_chan *chan = to_ls1x_dma_chan(dchan);
+
+	if (!dchan)
+		return -EINVAL;
+
+	chan->cfg = *config;
+
+	return 0;
+}
+
+static int ls1x_dma_terminate_all(struct dma_chan *dchan)
+{
+	struct ls1x_dma_chan *chan = to_ls1x_dma_chan(dchan);
+	unsigned long flags;
+	LIST_HEAD(head);
+
+	spin_lock_irqsave(&chan->vchan.lock, flags);
+
+	chan_writel(chan, LS1X_DMA_CTRL,
+		    chan_readl(chan, LS1X_DMA_CTRL) | LS1X_DMA_STOP);
+	chan->desc = NULL;
+	vchan_get_all_descriptors(&chan->vchan, &head);
+
+	spin_unlock_irqrestore(&chan->vchan.lock, flags);
+
+	vchan_dma_desc_free_list(&chan->vchan, &head);
+
+	return 0;
+}
+
+static void ls1x_dma_trigger(struct ls1x_dma_chan *chan)
+{
+	struct dma_chan *dchan = &chan->vchan.chan;
+	struct ls1x_dma_desc *desc;
+	struct virt_dma_desc *vdesc;
+	unsigned int val;
+
+	vdesc = vchan_next_desc(&chan->vchan);
+	if (!vdesc) {
+		dev_warn(chan2dev(dchan), "No pending descriptor\n");
+		return;
+	}
+	chan->desc = desc = to_ls1x_dma_desc(vdesc);
+
+	dev_dbg(chan2dev(dchan), "cookie=%d, %u descs, starting hwdesc=%px\n",
+		dchan->cookie, desc->nr_descs, &desc->hwdesc[0]);
+
+	val = desc->hwdesc[0].phys & LS1X_DMA_ADDR_MASK;
+	val |= chan->id;
+	val |= LS1X_DMA_START;
+	chan_writel(chan, LS1X_DMA_CTRL, val);
+}
+
+static void ls1x_dma_issue_pending(struct dma_chan *dchan)
+{
+	struct ls1x_dma_chan *chan = to_ls1x_dma_chan(dchan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chan->vchan.lock, flags);
+
+	if (vchan_issue_pending(&chan->vchan) && !chan->desc)
+		ls1x_dma_trigger(chan);
+
+	spin_unlock_irqrestore(&chan->vchan.lock, flags);
+}
+
+static irqreturn_t ls1x_dma_irq_handler(int irq, void *data)
+{
+	struct ls1x_dma_chan *chan = data;
+	struct dma_chan *dchan = &chan->vchan.chan;
+
+	dev_dbg(chan2dev(dchan), "DMA IRQ %d on channel %d\n", irq, chan->id);
+	if (!chan->desc) {
+		dev_warn(chan2dev(dchan),
+			 "DMA IRQ with no active descriptor on channel %d\n",
+			 chan->id);
+		return IRQ_NONE;
+	}
+
+	spin_lock(&chan->vchan.lock);
+
+	if (chan->desc->type == DMA_CYCLIC) {
+		vchan_cyclic_callback(&chan->desc->vdesc);
+	} else {
+		list_del(&chan->desc->vdesc.node);
+		vchan_cookie_complete(&chan->desc->vdesc);
+		chan->desc = NULL;
+	}
+
+	spin_unlock(&chan->vchan.lock);
+	return IRQ_HANDLED;
+}
+
+static int ls1x_dma_chan_probe(struct platform_device *pdev,
+			       struct ls1x_dma *dma, int chan_id)
+{
+	struct device *dev = &pdev->dev;
+	struct ls1x_dma_chan *chan = &dma->chan[chan_id];
+	char *irq_name;
+	int ret;
+
+	chan->irq = platform_get_irq(pdev, chan_id);
+	if (chan->irq < 0) {
+		dev_err(dev, "failed to get IRQ %d!\n", chan->irq);
+		return ret;
+	}
+
+	irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s:ch%u",
+				  dev_name(dev), chan_id);
+	if (!irq_name)
+		return -ENOMEM;
+
+	ret = devm_request_irq(dev, chan->irq, ls1x_dma_irq_handler,
+			       IRQF_SHARED, irq_name, chan);
+	if (ret) {
+		dev_err(dev, "failed to request IRQ %u!\n", chan->irq);
+		return ret;
+	}
+
+	chan->id = chan_id;
+	chan->reg_base = dma->reg_base;
+	chan->vchan.desc_free = ls1x_dma_free_desc;
+	vchan_init(&chan->vchan, &dma->ddev);
+	dev_info(dev, "channel %d (irq %d) initialized\n", chan->id, chan->irq);
+
+	return 0;
+}
+
+static void ls1x_dma_chan_remove(struct ls1x_dma *dma, int chan_id)
+{
+	struct device *dev = dma->ddev.dev;
+	struct ls1x_dma_chan *chan = &dma->chan[chan_id];
+
+	devm_free_irq(dev, chan->irq, chan);
+	list_del(&chan->vchan.chan.device_node);
+	tasklet_kill(&chan->vchan.task);
+}
+
+static int ls1x_dma_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct plat_ls1x_dma *pdata;
+	struct dma_device *ddev;
+	struct ls1x_dma *dma;
+	int nr_chans, ret, i;
+
+	pdata = dev_get_platdata(dev);
+	if (!pdata) {
+		dev_err(dev, "platform data missing!\n");
+		return -EINVAL;
+	}
+
+	nr_chans = platform_irq_count(pdev);
+	if (nr_chans <= 0)
+		return nr_chans;
+
+	dma = devm_kzalloc(dev, struct_size(dma, chan, nr_chans), GFP_KERNEL);
+	if (!dma)
+		return -ENOMEM;
+
+	/* initialize DMA device */
+	dma->reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(dma->reg_base))
+		return PTR_ERR(dma->reg_base);
+
+	ddev = &dma->ddev;
+	ddev->dev = dev;
+	ddev->copy_align = DMAENGINE_ALIGN_16_BYTES;
+	ddev->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+	ddev->dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+	ddev->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+	ddev->residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
+	ddev->device_alloc_chan_resources = ls1x_dma_alloc_chan_resources;
+	ddev->device_free_chan_resources = ls1x_dma_free_chan_resources;
+	ddev->device_prep_slave_sg = ls1x_dma_prep_slave_sg;
+	ddev->device_config = ls1x_dma_slave_config;
+	ddev->device_terminate_all = ls1x_dma_terminate_all;
+	ddev->device_tx_status = dma_cookie_status;
+	ddev->device_issue_pending = ls1x_dma_issue_pending;
+	ddev->filter.map = pdata->slave_map;
+	ddev->filter.mapcnt = pdata->slavecnt;
+	ddev->filter.fn = ls1x_dma_filter;
+
+	dma_cap_set(DMA_SLAVE, ddev->cap_mask);
+	INIT_LIST_HEAD(&ddev->channels);
+
+	/* initialize DMA channels */
+	for (i = 0; i < nr_chans; i++) {
+		ret = ls1x_dma_chan_probe(pdev, dma, i);
+		if (ret)
+			return ret;
+	}
+	dma->nr_chans = nr_chans;
+
+	dma->clk = devm_clk_get(dev, pdev->name);
+	if (IS_ERR(dma->clk)) {
+		dev_err(dev, "failed to get %s clock!\n", pdev->name);
+		return PTR_ERR(dma->clk);
+	}
+	clk_prepare_enable(dma->clk);
+
+	ret = dma_async_device_register(ddev);
+	if (ret) {
+		dev_err(dev, "failed to register DMA device! %d\n", ret);
+		clk_disable_unprepare(dma->clk);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, dma);
+	dev_info(dev, "Loongson1 DMA driver registered\n");
+
+	return 0;
+}
+
+static int ls1x_dma_remove(struct platform_device *pdev)
+{
+	struct ls1x_dma *dma = platform_get_drvdata(pdev);
+	int i;
+
+	dma_async_device_unregister(&dma->ddev);
+	clk_disable_unprepare(dma->clk);
+	for (i = 0; i < dma->nr_chans; i++)
+		ls1x_dma_chan_remove(dma, i);
+
+	return 0;
+}
+
+static struct platform_driver ls1x_dma_driver = {
+	.probe	= ls1x_dma_probe,
+	.remove	= ls1x_dma_remove,
+	.driver	= {
+		.name	= "ls1x-dma",
+	},
+};
+
+module_platform_driver(ls1x_dma_driver);
+
+static bool ls1x_dma_filter(struct dma_chan *dchan, void *param)
+{
+	struct ls1x_dma_chan *chan = to_ls1x_dma_chan(dchan);
+	unsigned int chan_id = (unsigned int)param;
+
+	if (dchan->device->dev->driver != &ls1x_dma_driver.driver)
+		return false;
+
+	return chan_id == chan->id;
+}
+
+MODULE_AUTHOR("Kelvin Cheung <keguang.zhang@gmail.com>");
+MODULE_DESCRIPTION("Loongson1 DMA driver");
+MODULE_LICENSE("GPL");

base-commit: 6f64aa5746d254f2b9b94b837b7862549f2565a0
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 4+ messages in thread

* Re: [PATCH V4 RESEND] dmaengine: Loongson1: Add Loongson1 dmaengine driver
  2021-05-20 23:02 [PATCH V4 RESEND] dmaengine: Loongson1: Add Loongson1 dmaengine driver Keguang Zhang
@ 2021-06-07 11:07 ` Vinod Koul
  2021-07-04 14:45   ` Kelvin Cheung
  0 siblings, 1 reply; 4+ messages in thread
From: Vinod Koul @ 2021-06-07 11:07 UTC (permalink / raw)
  To: Keguang Zhang; +Cc: dmaengine, linux-mips, linux-kernel

On 21-05-21, 07:02, Keguang Zhang wrote:

> +config LOONGSON1_DMA
> +	tristate "Loongson1 DMA support"
> +	depends on MACH_LOONGSON32

Why does it have to do that? The dma driver is generic..

> +static int ls1x_dma_alloc_chan_resources(struct dma_chan *dchan)
> +{
> +	struct ls1x_dma_chan *chan = to_ls1x_dma_chan(dchan);
> +
> +	chan->desc_pool = dma_pool_create(dma_chan_name(dchan),
> +					  dchan->device->dev,
> +					  sizeof(struct ls1x_dma_lli),
> +					  __alignof__(struct ls1x_dma_lli), 0);
> +	if (!chan->desc_pool) {
> +		dev_err(chan2dev(dchan),
> +			"failed to alloc DMA descriptor pool!\n");

This can be dropped, allocators will warn you for the allocation
failures

> +		return -ENOMEM;
> +	}
> +
> +	return 0;
> +}
> +
> +static void ls1x_dma_free_desc(struct virt_dma_desc *vdesc)
> +{
> +	struct ls1x_dma_desc *desc = to_ls1x_dma_desc(vdesc);
> +
> +	if (desc->nr_descs) {
> +		unsigned int i = desc->nr_descs;
> +		struct ls1x_dma_hwdesc *hwdesc;
> +
> +		do {
> +			hwdesc = &desc->hwdesc[--i];
> +			dma_pool_free(desc->chan->desc_pool, hwdesc->lli,
> +				      hwdesc->phys);
> +		} while (i);
> +	}
> +
> +	kfree(desc);
> +}
> +
> +static struct ls1x_dma_desc *ls1x_dma_alloc_desc(struct ls1x_dma_chan *chan,
> +						 int sg_len)

single line now :)

> +{
> +	struct ls1x_dma_desc *desc;
> +	struct dma_chan *dchan = &chan->vchan.chan;
> +
> +	desc = kzalloc(struct_size(desc, hwdesc, sg_len), GFP_NOWAIT);
> +	if (!desc)
> +		dev_err(chan2dev(dchan), "failed to alloc DMA descriptor!\n");

this can be dropped too..

> +static struct dma_async_tx_descriptor *
> +ls1x_dma_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
> +		       unsigned int sg_len,
> +		       enum dma_transfer_direction direction,
> +		       unsigned long flags, void *context)
> +{
> +	struct ls1x_dma_chan *chan = to_ls1x_dma_chan(dchan);
> +	struct dma_slave_config *cfg = &chan->cfg;
> +	struct ls1x_dma_desc *desc;
> +	struct scatterlist *sg;
> +	unsigned int dev_addr, bus_width, cmd, i;
> +
> +	if (!is_slave_direction(direction)) {
> +		dev_err(chan2dev(dchan), "invalid DMA direction!\n");
> +		return NULL;
> +	}
> +
> +	dev_dbg(chan2dev(dchan), "sg_len=%d, dir=%s, flags=0x%lx\n", sg_len,
> +		direction == DMA_MEM_TO_DEV ? "to device" : "from device",
> +		flags);
> +
> +	switch (direction) {
> +	case DMA_MEM_TO_DEV:
> +		dev_addr = cfg->dst_addr;
> +		bus_width = cfg->dst_addr_width;
> +		cmd = LS1X_DMA_RAM2DEV | LS1X_DMA_INT;
> +		break;
> +	case DMA_DEV_TO_MEM:
> +		dev_addr = cfg->src_addr;
> +		bus_width = cfg->src_addr_width;
> +		cmd = LS1X_DMA_INT;
> +		break;
> +	default:
> +		dev_err(chan2dev(dchan),
> +			"unsupported DMA transfer mode! %d\n", direction);
> +		return NULL;

will this be ever executed?

> +static int ls1x_dma_slave_config(struct dma_chan *dchan,
> +				 struct dma_slave_config *config)
> +{
> +	struct ls1x_dma_chan *chan = to_ls1x_dma_chan(dchan);
> +
> +	if (!dchan)
> +		return -EINVAL;

should this not be checked before you dereference this to get chan

> +static void ls1x_dma_trigger(struct ls1x_dma_chan *chan)
> +{
> +	struct dma_chan *dchan = &chan->vchan.chan;
> +	struct ls1x_dma_desc *desc;
> +	struct virt_dma_desc *vdesc;
> +	unsigned int val;
> +
> +	vdesc = vchan_next_desc(&chan->vchan);
> +	if (!vdesc) {
> +		dev_warn(chan2dev(dchan), "No pending descriptor\n");

Hmm, I would not log that... this is called from
ls1x_dma_issue_pending() and which can be called from client driver but
previous completion would push and this can find empty queue so it can
happen quite frequently

> +static irqreturn_t ls1x_dma_irq_handler(int irq, void *data)
> +{
> +	struct ls1x_dma_chan *chan = data;
> +	struct dma_chan *dchan = &chan->vchan.chan;
> +
> +	dev_dbg(chan2dev(dchan), "DMA IRQ %d on channel %d\n", irq, chan->id);
> +	if (!chan->desc) {
> +		dev_warn(chan2dev(dchan),
> +			 "DMA IRQ with no active descriptor on channel %d\n",
> +			 chan->id);

single line pls

> +		return IRQ_NONE;
> +	}
> +
> +	spin_lock(&chan->vchan.lock);
> +
> +	if (chan->desc->type == DMA_CYCLIC) {
> +		vchan_cyclic_callback(&chan->desc->vdesc);
> +	} else {
> +		list_del(&chan->desc->vdesc.node);
> +		vchan_cookie_complete(&chan->desc->vdesc);
> +		chan->desc = NULL;
> +	}

not submitting next txn, defeats the purpose of dma if we dont push txns
as fast as possible..

> +static struct platform_driver ls1x_dma_driver = {
> +	.probe	= ls1x_dma_probe,
> +	.remove	= ls1x_dma_remove,
> +	.driver	= {
> +		.name	= "ls1x-dma",
> +	},

No device tree?

-- 
~Vinod

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH V4 RESEND] dmaengine: Loongson1: Add Loongson1 dmaengine driver
  2021-06-07 11:07 ` Vinod Koul
@ 2021-07-04 14:45   ` Kelvin Cheung
  2021-07-05  3:49     ` Vinod Koul
  0 siblings, 1 reply; 4+ messages in thread
From: Kelvin Cheung @ 2021-07-04 14:45 UTC (permalink / raw)
  To: Vinod Koul; +Cc: dmaengine, linux-mips, linux-kernel

Vinod Koul <vkoul@kernel.org> 于2021年6月7日周一 下午7:07写道:
>
> On 21-05-21, 07:02, Keguang Zhang wrote:
>
> > +config LOONGSON1_DMA
> > +     tristate "Loongson1 DMA support"
> > +     depends on MACH_LOONGSON32
>
> Why does it have to do that? The dma driver is generic..

This driver is only available for LOONGSON32 CPUs.
>
> > +static int ls1x_dma_alloc_chan_resources(struct dma_chan *dchan)
> > +{
> > +     struct ls1x_dma_chan *chan = to_ls1x_dma_chan(dchan);
> > +
> > +     chan->desc_pool = dma_pool_create(dma_chan_name(dchan),
> > +                                       dchan->device->dev,
> > +                                       sizeof(struct ls1x_dma_lli),
> > +                                       __alignof__(struct ls1x_dma_lli), 0);
> > +     if (!chan->desc_pool) {
> > +             dev_err(chan2dev(dchan),
> > +                     "failed to alloc DMA descriptor pool!\n");
>
> This can be dropped, allocators will warn you for the allocation
> failures

will do.
>
> > +             return -ENOMEM;
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +static void ls1x_dma_free_desc(struct virt_dma_desc *vdesc)
> > +{
> > +     struct ls1x_dma_desc *desc = to_ls1x_dma_desc(vdesc);
> > +
> > +     if (desc->nr_descs) {
> > +             unsigned int i = desc->nr_descs;
> > +             struct ls1x_dma_hwdesc *hwdesc;
> > +
> > +             do {
> > +                     hwdesc = &desc->hwdesc[--i];
> > +                     dma_pool_free(desc->chan->desc_pool, hwdesc->lli,
> > +                                   hwdesc->phys);
> > +             } while (i);
> > +     }
> > +
> > +     kfree(desc);
> > +}
> > +
> > +static struct ls1x_dma_desc *ls1x_dma_alloc_desc(struct ls1x_dma_chan *chan,
> > +                                              int sg_len)
>
> single line now :)

will do.
>
> > +{
> > +     struct ls1x_dma_desc *desc;
> > +     struct dma_chan *dchan = &chan->vchan.chan;
> > +
> > +     desc = kzalloc(struct_size(desc, hwdesc, sg_len), GFP_NOWAIT);
> > +     if (!desc)
> > +             dev_err(chan2dev(dchan), "failed to alloc DMA descriptor!\n");
>
> this can be dropped too..

will do.
>
> > +static struct dma_async_tx_descriptor *
> > +ls1x_dma_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
> > +                    unsigned int sg_len,
> > +                    enum dma_transfer_direction direction,
> > +                    unsigned long flags, void *context)
> > +{
> > +     struct ls1x_dma_chan *chan = to_ls1x_dma_chan(dchan);
> > +     struct dma_slave_config *cfg = &chan->cfg;
> > +     struct ls1x_dma_desc *desc;
> > +     struct scatterlist *sg;
> > +     unsigned int dev_addr, bus_width, cmd, i;
> > +
> > +     if (!is_slave_direction(direction)) {
> > +             dev_err(chan2dev(dchan), "invalid DMA direction!\n");
> > +             return NULL;
> > +     }
> > +
> > +     dev_dbg(chan2dev(dchan), "sg_len=%d, dir=%s, flags=0x%lx\n", sg_len,
> > +             direction == DMA_MEM_TO_DEV ? "to device" : "from device",
> > +             flags);
> > +
> > +     switch (direction) {
> > +     case DMA_MEM_TO_DEV:
> > +             dev_addr = cfg->dst_addr;
> > +             bus_width = cfg->dst_addr_width;
> > +             cmd = LS1X_DMA_RAM2DEV | LS1X_DMA_INT;
> > +             break;
> > +     case DMA_DEV_TO_MEM:
> > +             dev_addr = cfg->src_addr;
> > +             bus_width = cfg->src_addr_width;
> > +             cmd = LS1X_DMA_INT;
> > +             break;
> > +     default:
> > +             dev_err(chan2dev(dchan),
> > +                     "unsupported DMA transfer mode! %d\n", direction);
> > +             return NULL;
>
> will this be ever executed?

just in case.
>
> > +static int ls1x_dma_slave_config(struct dma_chan *dchan,
> > +                              struct dma_slave_config *config)
> > +{
> > +     struct ls1x_dma_chan *chan = to_ls1x_dma_chan(dchan);
> > +
> > +     if (!dchan)
> > +             return -EINVAL;
>
> should this not be checked before you dereference this to get chan

will drop this check.
>
> > +static void ls1x_dma_trigger(struct ls1x_dma_chan *chan)
> > +{
> > +     struct dma_chan *dchan = &chan->vchan.chan;
> > +     struct ls1x_dma_desc *desc;
> > +     struct virt_dma_desc *vdesc;
> > +     unsigned int val;
> > +
> > +     vdesc = vchan_next_desc(&chan->vchan);
> > +     if (!vdesc) {
> > +             dev_warn(chan2dev(dchan), "No pending descriptor\n");
>
> Hmm, I would not log that... this is called from
> ls1x_dma_issue_pending() and which can be called from client driver but
> previous completion would push and this can find empty queue so it can
> happen quite frequently

will drop this warning.
>
> > +static irqreturn_t ls1x_dma_irq_handler(int irq, void *data)
> > +{
> > +     struct ls1x_dma_chan *chan = data;
> > +     struct dma_chan *dchan = &chan->vchan.chan;
> > +
> > +     dev_dbg(chan2dev(dchan), "DMA IRQ %d on channel %d\n", irq, chan->id);
> > +     if (!chan->desc) {
> > +             dev_warn(chan2dev(dchan),
> > +                      "DMA IRQ with no active descriptor on channel %d\n",
> > +                      chan->id);
>
> single line pls

will do.
>
> > +             return IRQ_NONE;
> > +     }
> > +
> > +     spin_lock(&chan->vchan.lock);
> > +
> > +     if (chan->desc->type == DMA_CYCLIC) {
> > +             vchan_cyclic_callback(&chan->desc->vdesc);
> > +     } else {
> > +             list_del(&chan->desc->vdesc.node);
> > +             vchan_cookie_complete(&chan->desc->vdesc);
> > +             chan->desc = NULL;
> > +     }
>
> not submitting next txn, defeats the purpose of dma if we dont push txns
> as fast as possible..

will fix it.
>
> > +static struct platform_driver ls1x_dma_driver = {
> > +     .probe  = ls1x_dma_probe,
> > +     .remove = ls1x_dma_remove,
> > +     .driver = {
> > +             .name   = "ls1x-dma",
> > +     },
>
> No device tree?

Because the LOONGSON32 platform doesn't support DT yet.
>
> --
> ~Vinod



-- 
Best regards,

Kelvin Cheung

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH V4 RESEND] dmaengine: Loongson1: Add Loongson1 dmaengine driver
  2021-07-04 14:45   ` Kelvin Cheung
@ 2021-07-05  3:49     ` Vinod Koul
  0 siblings, 0 replies; 4+ messages in thread
From: Vinod Koul @ 2021-07-05  3:49 UTC (permalink / raw)
  To: Kelvin Cheung; +Cc: dmaengine, linux-mips, linux-kernel

On 04-07-21, 22:45, Kelvin Cheung wrote:
> Vinod Koul <vkoul@kernel.org> 于2021年6月7日周一 下午7:07写道:
> >
> > On 21-05-21, 07:02, Keguang Zhang wrote:
> >
> > > +config LOONGSON1_DMA
> > > +     tristate "Loongson1 DMA support"
> > > +     depends on MACH_LOONGSON32
> >
> > Why does it have to do that? The dma driver is generic..
> 
> This driver is only available for LOONGSON32 CPUs.

the underlaying firmware would ensure this driver is probed if you have
such a device, so why have this restriction?

> > > +static struct platform_driver ls1x_dma_driver = {
> > > +     .probe  = ls1x_dma_probe,
> > > +     .remove = ls1x_dma_remove,
> > > +     .driver = {
> > > +             .name   = "ls1x-dma",
> > > +     },
> >
> > No device tree?
> 
> Because the LOONGSON32 platform doesn't support DT yet.

Okay so how is the platform device created?

-- 
~Vinod

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2021-07-05  3:49 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-20 23:02 [PATCH V4 RESEND] dmaengine: Loongson1: Add Loongson1 dmaengine driver Keguang Zhang
2021-06-07 11:07 ` Vinod Koul
2021-07-04 14:45   ` Kelvin Cheung
2021-07-05  3:49     ` Vinod Koul

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).