From: Tony Ambardar <tony.ambardar@gmail.com>
To: Alexei Starovoitov <ast@kernel.org>,
Daniel Borkmann <daniel@iogearbox.net>,
Andrii Nakryiko <andrii@kernel.org>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Paul Burton <paulburton@kernel.org>
Cc: Tony Ambardar <Tony.Ambardar@gmail.com>,
netdev@vger.kernel.org, bpf@vger.kernel.org,
linux-mips@vger.kernel.org,
Johan Almbladh <johan.almbladh@anyfinetworks.com>,
Hassan Naveed <hnaveed@wavecomp.com>,
David Daney <ddaney@caviumnetworks.com>,
Luke Nelson <luke.r.nels@gmail.com>,
Serge Semin <fancer.lancer@gmail.com>,
Martin KaFai Lau <kafai@fb.com>, Song Liu <songliubraving@fb.com>,
Yonghong Song <yhs@fb.com>,
John Fastabend <john.fastabend@gmail.com>,
KP Singh <kpsingh@kernel.org>
Subject: [RFC PATCH bpf-next v1 10/14] MIPS: eBPF: improve and clarify enum 'which_ebpf_reg'
Date: Sun, 11 Jul 2021 17:34:56 -0700 [thread overview]
Message-ID: <a2cb9a208b069eeef12f5ebcd34b8a071d4eb8f1.1625970384.git.Tony.Ambardar@gmail.com> (raw)
In-Reply-To: <cover.1625970383.git.Tony.Ambardar@gmail.com>
Update enum and literals to be more consistent and less confusing. Prior
usage resulted in 'dst_reg' variables and 'dst_reg' enum literals, often
adjacent to each other and hampering maintenance.
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
---
arch/mips/net/ebpf_jit.c | 64 ++++++++++++++++++++--------------------
1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/arch/mips/net/ebpf_jit.c b/arch/mips/net/ebpf_jit.c
index bba41f334d07..61d7894051aa 100644
--- a/arch/mips/net/ebpf_jit.c
+++ b/arch/mips/net/ebpf_jit.c
@@ -177,11 +177,11 @@ static u32 b_imm(unsigned int tgt, struct jit_ctx *ctx)
(ctx->idx * 4) - 4;
}
-enum which_ebpf_reg {
- src_reg,
- src_reg_no_fp,
- dst_reg,
- dst_reg_fp_ok
+enum reg_usage {
+ REG_SRC_FP_OK,
+ REG_SRC_NO_FP,
+ REG_DST_FP_OK,
+ REG_DST_NO_FP
};
/*
@@ -192,9 +192,9 @@ enum which_ebpf_reg {
*/
static int ebpf_to_mips_reg(struct jit_ctx *ctx,
const struct bpf_insn *insn,
- enum which_ebpf_reg w)
+ enum reg_usage u)
{
- int ebpf_reg = (w == src_reg || w == src_reg_no_fp) ?
+ int ebpf_reg = (u == REG_SRC_FP_OK || u == REG_SRC_NO_FP) ?
insn->src_reg : insn->dst_reg;
switch (ebpf_reg) {
@@ -223,7 +223,7 @@ static int ebpf_to_mips_reg(struct jit_ctx *ctx,
ctx->flags |= EBPF_SAVE_S3;
return MIPS_R_S3;
case BPF_REG_10:
- if (w == dst_reg || w == src_reg_no_fp)
+ if (u == REG_DST_NO_FP || u == REG_SRC_NO_FP)
goto bad_reg;
ctx->flags |= EBPF_SEEN_FP;
/*
@@ -423,7 +423,7 @@ static int gen_imm_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
int idx)
{
int upper_bound, lower_bound;
- int dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ int dst = ebpf_to_mips_reg(ctx, insn, REG_DST_NO_FP);
if (dst < 0)
return dst;
@@ -696,7 +696,7 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
return r;
break;
case BPF_ALU64 | BPF_MUL | BPF_K: /* ALU64_IMM */
- dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ dst = ebpf_to_mips_reg(ctx, insn, REG_DST_NO_FP);
if (dst < 0)
return dst;
if (get_reg_val_type(ctx, this_idx, insn->dst_reg) == REG_32BIT)
@@ -712,7 +712,7 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
}
break;
case BPF_ALU64 | BPF_NEG | BPF_K: /* ALU64_IMM */
- dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ dst = ebpf_to_mips_reg(ctx, insn, REG_DST_NO_FP);
if (dst < 0)
return dst;
if (get_reg_val_type(ctx, this_idx, insn->dst_reg) == REG_32BIT)
@@ -720,7 +720,7 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
emit_instr(ctx, dsubu, dst, MIPS_R_ZERO, dst);
break;
case BPF_ALU | BPF_MUL | BPF_K: /* ALU_IMM */
- dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ dst = ebpf_to_mips_reg(ctx, insn, REG_DST_NO_FP);
if (dst < 0)
return dst;
td = get_reg_val_type(ctx, this_idx, insn->dst_reg);
@@ -739,7 +739,7 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
}
break;
case BPF_ALU | BPF_NEG | BPF_K: /* ALU_IMM */
- dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ dst = ebpf_to_mips_reg(ctx, insn, REG_DST_NO_FP);
if (dst < 0)
return dst;
td = get_reg_val_type(ctx, this_idx, insn->dst_reg);
@@ -753,7 +753,7 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
case BPF_ALU | BPF_MOD | BPF_K: /* ALU_IMM */
if (insn->imm == 0)
return -EINVAL;
- dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ dst = ebpf_to_mips_reg(ctx, insn, REG_DST_NO_FP);
if (dst < 0)
return dst;
td = get_reg_val_type(ctx, this_idx, insn->dst_reg);
@@ -784,7 +784,7 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
case BPF_ALU64 | BPF_MOD | BPF_K: /* ALU_IMM */
if (insn->imm == 0)
return -EINVAL;
- dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ dst = ebpf_to_mips_reg(ctx, insn, REG_DST_NO_FP);
if (dst < 0)
return dst;
if (get_reg_val_type(ctx, this_idx, insn->dst_reg) == REG_32BIT)
@@ -821,8 +821,8 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
case BPF_ALU64 | BPF_LSH | BPF_X: /* ALU64_REG */
case BPF_ALU64 | BPF_RSH | BPF_X: /* ALU64_REG */
case BPF_ALU64 | BPF_ARSH | BPF_X: /* ALU64_REG */
- src = ebpf_to_mips_reg(ctx, insn, src_reg);
- dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ src = ebpf_to_mips_reg(ctx, insn, REG_SRC_FP_OK);
+ dst = ebpf_to_mips_reg(ctx, insn, REG_DST_NO_FP);
if (src < 0 || dst < 0)
return -EINVAL;
if (get_reg_val_type(ctx, this_idx, insn->dst_reg) == REG_32BIT)
@@ -917,8 +917,8 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
case BPF_ALU | BPF_LSH | BPF_X: /* ALU_REG */
case BPF_ALU | BPF_RSH | BPF_X: /* ALU_REG */
case BPF_ALU | BPF_ARSH | BPF_X: /* ALU_REG */
- src = ebpf_to_mips_reg(ctx, insn, src_reg_no_fp);
- dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ src = ebpf_to_mips_reg(ctx, insn, REG_SRC_NO_FP);
+ dst = ebpf_to_mips_reg(ctx, insn, REG_DST_NO_FP);
if (src < 0 || dst < 0)
return -EINVAL;
td = get_reg_val_type(ctx, this_idx, insn->dst_reg);
@@ -1008,7 +1008,7 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
case BPF_JMP | BPF_JEQ | BPF_K: /* JMP_IMM */
case BPF_JMP | BPF_JNE | BPF_K: /* JMP_IMM */
cmp_eq = (bpf_op == BPF_JEQ);
- dst = ebpf_to_mips_reg(ctx, insn, dst_reg_fp_ok);
+ dst = ebpf_to_mips_reg(ctx, insn, REG_DST_FP_OK);
if (dst < 0)
return dst;
if (insn->imm == 0) {
@@ -1029,8 +1029,8 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
case BPF_JMP | BPF_JGT | BPF_X:
case BPF_JMP | BPF_JGE | BPF_X:
case BPF_JMP | BPF_JSET | BPF_X:
- src = ebpf_to_mips_reg(ctx, insn, src_reg_no_fp);
- dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ src = ebpf_to_mips_reg(ctx, insn, REG_SRC_NO_FP);
+ dst = ebpf_to_mips_reg(ctx, insn, REG_DST_NO_FP);
if (src < 0 || dst < 0)
return -EINVAL;
td = get_reg_val_type(ctx, this_idx, insn->dst_reg);
@@ -1160,7 +1160,7 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
case BPF_JMP | BPF_JSLT | BPF_K: /* JMP_IMM */
case BPF_JMP | BPF_JSLE | BPF_K: /* JMP_IMM */
cmp_eq = (bpf_op == BPF_JSGE);
- dst = ebpf_to_mips_reg(ctx, insn, dst_reg_fp_ok);
+ dst = ebpf_to_mips_reg(ctx, insn, REG_DST_FP_OK);
if (dst < 0)
return dst;
@@ -1235,7 +1235,7 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
case BPF_JMP | BPF_JLT | BPF_K:
case BPF_JMP | BPF_JLE | BPF_K:
cmp_eq = (bpf_op == BPF_JGE);
- dst = ebpf_to_mips_reg(ctx, insn, dst_reg_fp_ok);
+ dst = ebpf_to_mips_reg(ctx, insn, REG_DST_FP_OK);
if (dst < 0)
return dst;
/*
@@ -1258,7 +1258,7 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
goto jeq_common;
case BPF_JMP | BPF_JSET | BPF_K: /* JMP_IMM */
- dst = ebpf_to_mips_reg(ctx, insn, dst_reg_fp_ok);
+ dst = ebpf_to_mips_reg(ctx, insn, REG_DST_FP_OK);
if (dst < 0)
return dst;
@@ -1303,7 +1303,7 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
emit_instr(ctx, nop);
break;
case BPF_LD | BPF_DW | BPF_IMM:
- dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ dst = ebpf_to_mips_reg(ctx, insn, REG_DST_NO_FP);
if (dst < 0)
return dst;
t64 = ((u64)(u32)insn->imm) | ((u64)(insn + 1)->imm << 32);
@@ -1326,7 +1326,7 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
case BPF_ALU | BPF_END | BPF_FROM_BE:
case BPF_ALU | BPF_END | BPF_FROM_LE:
- dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ dst = ebpf_to_mips_reg(ctx, insn, REG_DST_NO_FP);
if (dst < 0)
return dst;
td = get_reg_val_type(ctx, this_idx, insn->dst_reg);
@@ -1369,7 +1369,7 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
dst = MIPS_R_SP;
mem_off = insn->off + MAX_BPF_STACK;
} else {
- dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ dst = ebpf_to_mips_reg(ctx, insn, REG_DST_NO_FP);
if (dst < 0)
return dst;
mem_off = insn->off;
@@ -1400,12 +1400,12 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
src = MIPS_R_SP;
mem_off = insn->off + MAX_BPF_STACK;
} else {
- src = ebpf_to_mips_reg(ctx, insn, src_reg_no_fp);
+ src = ebpf_to_mips_reg(ctx, insn, REG_SRC_NO_FP);
if (src < 0)
return src;
mem_off = insn->off;
}
- dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ dst = ebpf_to_mips_reg(ctx, insn, REG_DST_NO_FP);
if (dst < 0)
return dst;
switch (BPF_SIZE(insn->code)) {
@@ -1435,12 +1435,12 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
dst = MIPS_R_SP;
mem_off = insn->off + MAX_BPF_STACK;
} else {
- dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ dst = ebpf_to_mips_reg(ctx, insn, REG_DST_NO_FP);
if (dst < 0)
return dst;
mem_off = insn->off;
}
- src = ebpf_to_mips_reg(ctx, insn, src_reg_no_fp);
+ src = ebpf_to_mips_reg(ctx, insn, REG_SRC_NO_FP);
if (src < 0)
return src;
if (BPF_MODE(insn->code) == BPF_ATOMIC) {
--
2.25.1
next prev parent reply other threads:[~2021-07-12 0:35 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-12 0:34 [RFC PATCH bpf-next v1 00/14] MIPS: eBPF: refactor code, add MIPS32 JIT Tony Ambardar
2021-07-12 0:34 ` [RFC PATCH bpf-next v1 01/14] MIPS: eBPF: support BPF_TAIL_CALL in JIT static analysis Tony Ambardar
2021-07-12 0:34 ` [RFC PATCH bpf-next v1 02/14] MIPS: eBPF: mask 32-bit index for tail calls Tony Ambardar
2021-07-12 0:34 ` [RFC PATCH bpf-next v1 03/14] MIPS: eBPF: fix BPF_ALU|ARSH handling in JIT static analysis Tony Ambardar
2021-07-12 0:34 ` [RFC PATCH bpf-next v1 04/14] MIPS: eBPF: support BPF_JMP32 " Tony Ambardar
2021-07-12 0:34 ` [RFC PATCH bpf-next v1 05/14] MIPS: eBPF: fix system hang with verifier dead-code patching Tony Ambardar
2021-07-12 0:34 ` [RFC PATCH bpf-next v1 06/14] MIPS: eBPF: fix JIT static analysis hang with bounded loops Tony Ambardar
2021-07-12 0:34 ` [RFC PATCH bpf-next v1 07/14] MIPS: eBPF: fix MOD64 insn on R6 ISA Tony Ambardar
2021-07-12 0:34 ` [RFC PATCH bpf-next v1 08/14] MIPS: eBPF: support long jump for BPF_JMP|EXIT Tony Ambardar
2021-07-12 0:34 ` [RFC PATCH bpf-next v1 09/14] MIPS: eBPF: drop src_reg restriction in BPF_LD|BPF_DW|BPF_IMM Tony Ambardar
2021-07-12 0:34 ` Tony Ambardar [this message]
2021-07-12 0:34 ` [RFC PATCH bpf-next v1 11/14] MIPS: eBPF: add core support for 32/64-bit systems Tony Ambardar
2021-07-12 0:34 ` [RFC PATCH bpf-next v1 13/14] MIPS: uasm: Enable muhu opcode for MIPS R6 Tony Ambardar
2021-07-12 0:35 ` [RFC PATCH bpf-next v1 14/14] MIPS: eBPF: add MIPS32 JIT Tony Ambardar
2021-07-20 1:25 ` [RFC PATCH bpf-next v1 00/14] MIPS: eBPF: refactor code, " Johan Almbladh
2021-07-20 17:47 ` Alexei Starovoitov
2021-10-05 8:26 ` [RFC PATCH bpf-next v2 00/16] " Tony Ambardar
2021-10-05 8:26 ` [RFC PATCH bpf-next v2 01/16] MIPS: eBPF: support BPF_TAIL_CALL in JIT static analysis Tony Ambardar
2021-10-05 8:26 ` [RFC PATCH bpf-next v2 02/16] MIPS: eBPF: mask 32-bit index for tail calls Tony Ambardar
2021-10-05 8:26 ` [RFC PATCH bpf-next v2 03/16] MIPS: eBPF: fix BPF_ALU|ARSH handling in JIT static analysis Tony Ambardar
2021-10-05 8:26 ` [RFC PATCH bpf-next v2 04/16] MIPS: eBPF: support BPF_JMP32 " Tony Ambardar
2021-10-05 8:26 ` [RFC PATCH bpf-next v2 05/16] MIPS: eBPF: fix system hang with verifier dead-code patching Tony Ambardar
2021-10-05 8:26 ` [RFC PATCH bpf-next v2 06/16] MIPS: eBPF: fix JIT static analysis hang with bounded loops Tony Ambardar
2021-10-05 8:26 ` [RFC PATCH bpf-next v2 07/16] MIPS: eBPF: fix MOD64 insn on R6 ISA Tony Ambardar
2021-10-05 8:26 ` [RFC PATCH bpf-next v2 08/16] MIPS: eBPF: support long jump for BPF_JMP|EXIT Tony Ambardar
2021-10-05 8:26 ` [RFC PATCH bpf-next v2 09/16] MIPS: eBPF: drop src_reg restriction in BPF_LD|BPF_DW|BPF_IMM Tony Ambardar
2021-10-05 8:26 ` [RFC PATCH bpf-next v2 10/16] MIPS: eBPF: add core support for 32/64-bit systems Tony Ambardar
2021-10-05 8:26 ` [RFC PATCH bpf-next v2 11/16] bpf: allow tailcalls in subprograms for MIPS64/MIPS32 Tony Ambardar
2021-10-05 8:26 ` [RFC PATCH bpf-next v2 13/16] MIPS: eBPF64: support BPF_JMP32 conditionals Tony Ambardar
2021-10-05 8:26 ` [RFC PATCH bpf-next v2 14/16] MIPS: eBPF64: implement all BPF_ATOMIC ops Tony Ambardar
2021-10-05 8:26 ` [RFC PATCH bpf-next v2 15/16] MIPS: uasm: Enable muhu opcode for MIPS R6 Tony Ambardar
2021-10-05 8:27 ` [RFC PATCH bpf-next v2 16/16] MIPS: eBPF: add MIPS32 JIT Tony Ambardar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a2cb9a208b069eeef12f5ebcd34b8a071d4eb8f1.1625970384.git.Tony.Ambardar@gmail.com \
--to=tony.ambardar@gmail.com \
--cc=andrii@kernel.org \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=ddaney@caviumnetworks.com \
--cc=fancer.lancer@gmail.com \
--cc=hnaveed@wavecomp.com \
--cc=johan.almbladh@anyfinetworks.com \
--cc=john.fastabend@gmail.com \
--cc=kafai@fb.com \
--cc=kpsingh@kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=luke.r.nels@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=paulburton@kernel.org \
--cc=songliubraving@fb.com \
--cc=tsbogend@alpha.franken.de \
--cc=yhs@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).