linux-mips.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "H. Nikolaus Schaller" <hns@goldelico.com>
To: Paul Cercueil <paul@crapouillou.net>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	"H. Nikolaus Schaller" <hns@goldelico.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Kees Cook <keescook@chromium.org>,
	"Eric W. Biederman" <ebiederm@xmission.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Andrzej Hajda <a.hajda@samsung.com>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Robert Foss <robert.foss@linaro.org>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Ezequiel Garcia <ezequiel@collabora.com>,
	Harry Wentland <harry.wentland@amd.com>,
	Sam Ravnborg <sam@ravnborg.org>,
	Maxime Ripard <maxime@cerno.tech>,
	Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: devicetree@vger.kernel.org, linux-mips@vger.kernel.org,
	linux-kernel@vger.kernel.org, letux-kernel@openphoenux.org,
	Paul Boddie <paul@boddie.org.uk>, Jonas Karlman <jonas@kwiboo.se>,
	dri-devel@lists.freedesktop.org
Subject: [PATCH v2 2/8] drm/ingenic: Add jz4780 Synopsys HDMI driver
Date: Thu,  5 Aug 2021 16:07:51 +0200	[thread overview]
Message-ID: <bf4efd82da3a50b49eb0d04c1292a1ad6f16de22.1628172477.git.hns@goldelico.com> (raw)
In-Reply-To: <cover.1628172477.git.hns@goldelico.com>

From: Paul Boddie <paul@boddie.org.uk>

A specialisation of the generic Synopsys HDMI driver is employed for JZ4780
HDMI support. This requires a new driver, plus device tree and configuration
modifications.

Signed-off-by: Paul Boddie <paul@boddie.org.uk>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 drivers/gpu/drm/ingenic/Kconfig           |   9 ++
 drivers/gpu/drm/ingenic/Makefile          |   1 +
 drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c | 121 ++++++++++++++++++++++
 3 files changed, 131 insertions(+)
 create mode 100644 drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c

diff --git a/drivers/gpu/drm/ingenic/Kconfig b/drivers/gpu/drm/ingenic/Kconfig
index 3b57f8be007c4..4c7d311fbefff 100644
--- a/drivers/gpu/drm/ingenic/Kconfig
+++ b/drivers/gpu/drm/ingenic/Kconfig
@@ -25,4 +25,13 @@ config DRM_INGENIC_IPU
 
 	  The Image Processing Unit (IPU) will appear as a second primary plane.
 
+config DRM_INGENIC_DW_HDMI
+	bool "Ingenic specific support for Synopsys DW HDMI"
+	depends on MACH_JZ4780
+	select DRM_DW_HDMI
+	help
+	  Choose this option to enable Synopsys DesignWare HDMI based driver.
+	  If you want to enable HDMI on Ingenic JZ4780 based SoC, you should
+	  select this option..
+
 endif
diff --git a/drivers/gpu/drm/ingenic/Makefile b/drivers/gpu/drm/ingenic/Makefile
index d313326bdddbb..3db9888a6c046 100644
--- a/drivers/gpu/drm/ingenic/Makefile
+++ b/drivers/gpu/drm/ingenic/Makefile
@@ -1,3 +1,4 @@
 obj-$(CONFIG_DRM_INGENIC) += ingenic-drm.o
 ingenic-drm-y = ingenic-drm-drv.o
 ingenic-drm-$(CONFIG_DRM_INGENIC_IPU) += ingenic-ipu.o
+ingenic-drm-$(CONFIG_DRM_INGENIC_DW_HDMI) += ingenic-dw-hdmi.o
diff --git a/drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c b/drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c
new file mode 100644
index 0000000000000..61e7a57d7cec1
--- /dev/null
+++ b/drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2011-2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2019, 2020 Paul Boddie <paul@boddie.org.uk>
+ *
+ * Derived from dw_hdmi-imx.c with i.MX portions removed.
+ * Probe and remove operations derived from rcar_dw_hdmi.c.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <drm/bridge/dw_hdmi.h>
+#include <drm/drm_of.h>
+
+static const struct dw_hdmi_mpll_config ingenic_mpll_cfg[] = {
+	{ 45250000,  { { 0x01e0, 0x0000 }, { 0x21e1, 0x0000 }, { 0x41e2, 0x0000 } } },
+	{ 92500000,  { { 0x0140, 0x0005 }, { 0x2141, 0x0005 }, { 0x4142, 0x0005 } } },
+	{ 148500000, { { 0x00a0, 0x000a }, { 0x20a1, 0x000a }, { 0x40a2, 0x000a } } },
+	{ 216000000, { { 0x00a0, 0x000a }, { 0x2001, 0x000f }, { 0x4002, 0x000f } } },
+	{ ~0UL,      { { 0x0000, 0x0000 }, { 0x0000, 0x0000 }, { 0x0000, 0x0000 } } }
+};
+
+static const struct dw_hdmi_curr_ctrl ingenic_cur_ctr[] = {
+	/*pixelclk     bpp8    bpp10   bpp12 */
+	{ 54000000,  { 0x091c, 0x091c, 0x06dc } },
+	{ 58400000,  { 0x091c, 0x06dc, 0x06dc } },
+	{ 72000000,  { 0x06dc, 0x06dc, 0x091c } },
+	{ 74250000,  { 0x06dc, 0x0b5c, 0x091c } },
+	{ 118800000, { 0x091c, 0x091c, 0x06dc } },
+	{ 216000000, { 0x06dc, 0x0b5c, 0x091c } },
+	{ ~0UL,      { 0x0000, 0x0000, 0x0000 } },
+};
+
+/*
+ * Resistance term 133Ohm Cfg
+ * PREEMP config 0.00
+ * TX/CK level 10
+ */
+static const struct dw_hdmi_phy_config ingenic_phy_config[] = {
+	/*pixelclk   symbol   term   vlev */
+	{ 216000000, 0x800d, 0x0005, 0x01ad},
+	{ ~0UL,      0x0000, 0x0000, 0x0000}
+};
+
+static enum drm_mode_status
+ingenic_dw_hdmi_mode_valid(struct dw_hdmi *hdmi, void *data,
+			   const struct drm_display_info *info,
+			   const struct drm_display_mode *mode)
+{
+	if (mode->clock < 13500)
+		return MODE_CLOCK_LOW;
+	/* FIXME: Hardware is capable of 270MHz, but setup data is missing. */
+	if (mode->clock > 216000)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static bool
+ingenic_dw_hdmi_mode_fixup(struct drm_bridge *bridge,
+			   const struct drm_display_mode *mode,
+			   struct drm_display_mode *adjusted_mode)
+{
+	adjusted_mode->flags |= (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
+	adjusted_mode->flags &= ~(DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
+
+	return true;
+}
+
+static const struct drm_bridge_timings ingenic_dw_hdmi_timings = {
+	.input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE,
+};
+
+static struct dw_hdmi_plat_data ingenic_dw_hdmi_plat_data = {
+	.mpll_cfg   = ingenic_mpll_cfg,
+	.cur_ctr    = ingenic_cur_ctr,
+	.phy_config = ingenic_phy_config,
+	.mode_valid = ingenic_dw_hdmi_mode_valid,
+	.mode_fixup = ingenic_dw_hdmi_mode_fixup,
+	.timings    = &ingenic_dw_hdmi_timings,
+};
+
+static const struct of_device_id ingenic_dw_hdmi_dt_ids[] = {
+	{ .compatible = "ingenic,jz4780-dw-hdmi" },
+	{ /* Sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ingenic_dw_hdmi_dt_ids);
+
+static int ingenic_dw_hdmi_probe(struct platform_device *pdev)
+{
+	struct dw_hdmi *hdmi;
+
+	hdmi = dw_hdmi_probe(pdev, &ingenic_dw_hdmi_plat_data);
+	if (IS_ERR(hdmi))
+		return PTR_ERR(hdmi);
+
+	platform_set_drvdata(pdev, hdmi);
+
+	return 0;
+}
+
+static int ingenic_dw_hdmi_remove(struct platform_device *pdev)
+{
+	struct dw_hdmi *hdmi = platform_get_drvdata(pdev);
+
+	dw_hdmi_remove(hdmi);
+
+	return 0;
+}
+
+static struct platform_driver ingenic_dw_hdmi_driver = {
+	.probe  = ingenic_dw_hdmi_probe,
+	.remove = ingenic_dw_hdmi_remove,
+	.driver = {
+		.name = "dw-hdmi-ingenic",
+		.of_match_table = ingenic_dw_hdmi_dt_ids,
+	},
+};
+
+struct platform_driver *ingenic_dw_hdmi_driver_ptr = &ingenic_dw_hdmi_driver;
-- 
2.31.1


  parent reply	other threads:[~2021-08-05 14:08 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-05 14:07 [PATCH v2 0/8] MIPS: jz4780 HDMI H. Nikolaus Schaller
2021-08-05 14:07 ` [PATCH v2 1/8] drm/bridge: synopsis: Add mode_fixup and bridge timings support H. Nikolaus Schaller
2021-08-05 14:32   ` Robert Foss
2021-08-05 14:45     ` H. Nikolaus Schaller
2021-08-08  4:50     ` H. Nikolaus Schaller
2021-08-05 14:07 ` H. Nikolaus Schaller [this message]
2021-08-05 14:07 ` [PATCH v2 3/8] drm/ingenic: Add support for JZ4780 and HDMI output H. Nikolaus Schaller
2021-08-05 15:22   ` Paul Cercueil
2021-08-05 16:01     ` H. Nikolaus Schaller
2021-08-08  5:04     ` H. Nikolaus Schaller
2021-08-05 14:07 ` [PATCH v2 4/8] dt-bindings: display: Add ingenic-jz4780-hdmi DT Schema H. Nikolaus Schaller
2021-08-05 14:07 ` [PATCH v2 5/8] MIPS: DTS: jz4780: account for Synopsys HDMI driver and LCD controller H. Nikolaus Schaller
2021-08-05 14:07 ` [PATCH v2 6/8] MIPS: DTS: CI20: add HDMI setup H. Nikolaus Schaller
2021-08-05 14:07 ` [PATCH v2 7/8] MIPS: CI20: defconfig: configure for DRM_DW_HDMI_JZ4780 H. Nikolaus Schaller
2021-08-05 14:07 ` [PATCH v2 8/8] [RFC] drm/ingenic: convert to component framework for jz4780 hdmi H. Nikolaus Schaller
2021-08-05 15:04   ` Laurent Pinchart
2021-08-05 16:07     ` H. Nikolaus Schaller
2021-08-05 16:17       ` Paul Cercueil
2021-08-05 16:22         ` H. Nikolaus Schaller
2021-08-10  9:31         ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bf4efd82da3a50b49eb0d04c1292a1ad6f16de22.1628172477.git.hns@goldelico.com \
    --to=hns@goldelico.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=ebiederm@xmission.com \
    --cc=ezequiel@collabora.com \
    --cc=geert+renesas@glider.be \
    --cc=harry.wentland@amd.com \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=keescook@chromium.org \
    --cc=letux-kernel@openphoenux.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime@cerno.tech \
    --cc=miquel.raynal@bootlin.com \
    --cc=narmstrong@baylibre.com \
    --cc=paul@boddie.org.uk \
    --cc=paul@crapouillou.net \
    --cc=robert.foss@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=sam@ravnborg.org \
    --cc=tsbogend@alpha.franken.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).