linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
To: Linus Torvalds <torvalds@linux-foundation.org>,
	x86@kernel.org, Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	Andy Lutomirski <luto@amacapital.net>,
	Dmitry Safonov <dsafonov@virtuozzo.com>,
	Cyrill Gorcunov <gorcunov@openvz.org>,
	Borislav Petkov <bp@suse.de>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
	Andrey Ryabinin <aryabinin@virtuozzo.com>
Subject: [PATCHv5 03/19] x86/kasan: Use the same shadow offset for 4- and 5-level paging
Date: Mon, 21 Aug 2017 18:29:00 +0300	[thread overview]
Message-ID: <20170821152916.40124-4-kirill.shutemov@linux.intel.com> (raw)
In-Reply-To: <20170821152916.40124-1-kirill.shutemov@linux.intel.com>

We are going to support boot-time switching between 4- and 5-level
paging. For KASAN it means we cannot have different KASAN_SHADOW_OFFSET
for different paging modes: the constant is passed to gcc to generate
code and cannot be changed at runtime.

This patch changes KASAN code to use 0xdffffc0000000000 as shadow offset
for both 4- and 5-level paging.

For 5-level paging it means that shadow memory region is not aligned to
PGD boundary anymore and we have to handle unaligned parts of the region
properly.

In addition, we have to exclude paravirt code from KASAN instrumentation
as we now use set_pgd() before KASAN is fully ready.

Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
[kirill.shutemov@linux.intel.com: clenaup, changelog message]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
---
 arch/x86/Kconfig            |  1 -
 arch/x86/kernel/Makefile    |  3 +-
 arch/x86/mm/kasan_init_64.c | 86 ++++++++++++++++++++++++++++++++++-----------
 3 files changed, 67 insertions(+), 23 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index ce3ed304288d..2c9c4899d9ff 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -299,7 +299,6 @@ config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 config KASAN_SHADOW_OFFSET
 	hex
 	depends on KASAN
-	default 0xdff8000000000000 if X86_5LEVEL
 	default 0xdffffc0000000000
 
 config HAVE_INTEL_TXT
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 287eac7d207f..4509140232c3 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -24,7 +24,8 @@ endif
 KASAN_SANITIZE_head$(BITS).o				:= n
 KASAN_SANITIZE_dumpstack.o				:= n
 KASAN_SANITIZE_dumpstack_$(BITS).o			:= n
-KASAN_SANITIZE_stacktrace.o := n
+KASAN_SANITIZE_stacktrace.o				:= n
+KASAN_SANITIZE_paravirt.o				:= n
 
 OBJECT_FILES_NON_STANDARD_head_$(BITS).o		:= y
 OBJECT_FILES_NON_STANDARD_relocate_kernel_$(BITS).o	:= y
diff --git a/arch/x86/mm/kasan_init_64.c b/arch/x86/mm/kasan_init_64.c
index bc84b73684b7..f6b4db2647b5 100644
--- a/arch/x86/mm/kasan_init_64.c
+++ b/arch/x86/mm/kasan_init_64.c
@@ -15,6 +15,8 @@
 
 extern struct range pfn_mapped[E820_MAX_ENTRIES];
 
+static p4d_t tmp_p4d_table[PTRS_PER_P4D] __initdata __aligned(PAGE_SIZE);
+
 static int __init map_range(struct range *range)
 {
 	unsigned long start;
@@ -30,8 +32,9 @@ static void __init clear_pgds(unsigned long start,
 			unsigned long end)
 {
 	pgd_t *pgd;
+	unsigned long pgd_end = end & PGDIR_MASK;
 
-	for (; start < end; start += PGDIR_SIZE) {
+	for (; start < pgd_end; start += PGDIR_SIZE) {
 		pgd = pgd_offset_k(start);
 		/*
 		 * With folded p4d, pgd_clear() is nop, use p4d_clear()
@@ -42,29 +45,60 @@ static void __init clear_pgds(unsigned long start,
 		else
 			pgd_clear(pgd);
 	}
+
+	pgd = pgd_offset_k(start);
+	for (; start < end; start += P4D_SIZE)
+		p4d_clear(p4d_offset(pgd, start));
+}
+
+static inline p4d_t *early_p4d_offset(pgd_t *pgd, unsigned long addr)
+{
+	unsigned long p4d;
+
+	if (!IS_ENABLED(CONFIG_X86_5LEVEL))
+		return (p4d_t *)pgd;
+
+	p4d = __pa_nodebug(pgd_val(*pgd)) & PTE_PFN_MASK;
+	p4d += __START_KERNEL_map - phys_base;
+	return (p4d_t *)p4d + p4d_index(addr);
+}
+
+static void __init kasan_early_p4d_populate(pgd_t *pgd,
+		unsigned long addr,
+		unsigned long end)
+{
+	pgd_t pgd_entry;
+	p4d_t *p4d, p4d_entry;
+	unsigned long next;
+
+	if (pgd_none(*pgd)) {
+		pgd_entry = __pgd(_KERNPG_TABLE | __pa_nodebug(kasan_zero_p4d));
+		set_pgd(pgd, pgd_entry);
+	}
+
+	p4d = early_p4d_offset(pgd, addr);
+	do {
+		next = p4d_addr_end(addr, end);
+
+		if (!p4d_none(*p4d))
+			continue;
+
+		p4d_entry = __p4d(_KERNPG_TABLE | __pa_nodebug(kasan_zero_pud));
+		set_p4d(p4d, p4d_entry);
+	} while (p4d++, addr = next, addr != end && p4d_none(*p4d));
 }
 
 static void __init kasan_map_early_shadow(pgd_t *pgd)
 {
-	int i;
-	unsigned long start = KASAN_SHADOW_START;
+	unsigned long addr = KASAN_SHADOW_START & PGDIR_MASK;
 	unsigned long end = KASAN_SHADOW_END;
+	unsigned long next;
 
-	for (i = pgd_index(start); start < end; i++) {
-		switch (CONFIG_PGTABLE_LEVELS) {
-		case 4:
-			pgd[i] = __pgd(__pa_nodebug(kasan_zero_pud) |
-					_KERNPG_TABLE);
-			break;
-		case 5:
-			pgd[i] = __pgd(__pa_nodebug(kasan_zero_p4d) |
-					_KERNPG_TABLE);
-			break;
-		default:
-			BUILD_BUG();
-		}
-		start += PGDIR_SIZE;
-	}
+	pgd += pgd_index(addr);
+	do {
+		next = pgd_addr_end(addr, end);
+		kasan_early_p4d_populate(pgd, addr, next);
+	} while (pgd++, addr = next, addr != end);
 }
 
 #ifdef CONFIG_KASAN_INLINE
@@ -101,7 +135,7 @@ void __init kasan_early_init(void)
 	for (i = 0; i < PTRS_PER_PUD; i++)
 		kasan_zero_pud[i] = __pud(pud_val);
 
-	for (i = 0; CONFIG_PGTABLE_LEVELS >= 5 && i < PTRS_PER_P4D; i++)
+	for (i = 0; IS_ENABLED(CONFIG_X86_5LEVEL) && i < PTRS_PER_P4D; i++)
 		kasan_zero_p4d[i] = __p4d(p4d_val);
 
 	kasan_map_early_shadow(early_top_pgt);
@@ -117,12 +151,22 @@ void __init kasan_init(void)
 #endif
 
 	memcpy(early_top_pgt, init_top_pgt, sizeof(early_top_pgt));
+
+	if (IS_ENABLED(CONFIG_X86_5LEVEL)) {
+		void *ptr;
+
+		ptr = (void *)pgd_page_vaddr(*pgd_offset_k(KASAN_SHADOW_END));
+		memcpy(tmp_p4d_table, (void *)ptr, sizeof(tmp_p4d_table));
+		set_pgd(&early_top_pgt[pgd_index(KASAN_SHADOW_END)],
+				__pgd(__pa(tmp_p4d_table) | _KERNPG_TABLE));
+	}
+
 	load_cr3(early_top_pgt);
 	__flush_tlb_all();
 
-	clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END);
+	clear_pgds(KASAN_SHADOW_START & PGDIR_MASK, KASAN_SHADOW_END);
 
-	kasan_populate_zero_shadow((void *)KASAN_SHADOW_START,
+	kasan_populate_zero_shadow((void *)(KASAN_SHADOW_START & PGDIR_MASK),
 			kasan_mem_to_shadow((void *)PAGE_OFFSET));
 
 	for (i = 0; i < E820_MAX_ENTRIES; i++) {
-- 
2.14.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2017-08-21 15:29 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-21 15:28 [PATCHv5 00/19] Boot-time switching between 4- and 5-level paging Kirill A. Shutemov
2017-08-21 15:28 ` [PATCHv5 01/19] mm/sparsemem: Allocate mem_section at runtime for SPARSEMEM_EXTREME Kirill A. Shutemov
2017-08-22 16:28   ` Borislav Petkov
2017-08-22 17:50     ` Kirill A. Shutemov
2017-08-21 15:28 ` [PATCHv5 02/19] mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS Kirill A. Shutemov
2017-08-21 15:29 ` Kirill A. Shutemov [this message]
2017-08-21 15:29 ` [PATCHv5 04/19] x86/xen: Provide pre-built page tables only for XEN_PV and XEN_PVH Kirill A. Shutemov
2017-08-21 15:29 ` [PATCHv5 05/19] x86/xen: Drop 5-level paging support code from XEN_PV code Kirill A. Shutemov
2017-08-21 15:29 ` [PATCHv5 06/19] x86/boot/compressed/64: Detect and handle 5-level paging at boot-time Kirill A. Shutemov
2017-08-27 11:29   ` Cyrill Gorcunov
2017-09-04 13:02     ` Kirill A. Shutemov
2017-08-21 15:29 ` [PATCHv5 07/19] x86/mm: Make virtual memory layout movable for CONFIG_X86_5LEVEL Kirill A. Shutemov
2017-08-21 15:29 ` [PATCHv5 08/19] x86/mm: Make PGDIR_SHIFT and PTRS_PER_P4D variable Kirill A. Shutemov
2017-08-21 15:29 ` [PATCHv5 09/19] x86/mm: Make MAX_PHYSADDR_BITS and MAX_PHYSMEM_BITS dynamic Kirill A. Shutemov
2017-08-21 15:29 ` [PATCHv5 10/19] x86/mm: Make __PHYSICAL_MASK_SHIFT and __VIRTUAL_MASK_SHIFT dynamic Kirill A. Shutemov
2017-08-21 15:29 ` [PATCHv5 11/19] x86/mm: Make STACK_TOP_MAX dynamic Kirill A. Shutemov
2017-08-21 15:29 ` [PATCHv5 12/19] x86/mm: Adjust virtual address space layout in early boot Kirill A. Shutemov
2017-08-21 15:29 ` [PATCHv5 13/19] x86/mm: Make early boot code support boot-time switching of paging modes Kirill A. Shutemov
2017-08-21 15:29 ` [PATCHv5 14/19] x86/mm: Fold p4d page table layer at runtime Kirill A. Shutemov
2017-08-21 15:29 ` [PATCHv5 15/19] x86/mm: Replace compile-time checks for 5-level with runtime-time Kirill A. Shutemov
2017-08-21 15:29 ` [PATCHv5 16/19] x86/mm: Allow to boot without la57 if CONFIG_X86_5LEVEL=y Kirill A. Shutemov
2017-08-21 15:29 ` [PATCHv5 17/19] x86/xen: Allow XEN_PV and XEN_PVH to be enabled with X86_5LEVEL Kirill A. Shutemov
2017-08-21 15:29 ` [PATCHv5 18/19] x86/mm: Redefine some of page table helpers as macros Kirill A. Shutemov
2017-08-21 15:29 ` [PATCHv5 19/19] x86/mm: Offset boot-time paging mode switching cost Kirill A. Shutemov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170821152916.40124-4-kirill.shutemov@linux.intel.com \
    --to=kirill.shutemov@linux.intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=aryabinin@virtuozzo.com \
    --cc=bp@suse.de \
    --cc=dsafonov@virtuozzo.com \
    --cc=gorcunov@openvz.org \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=luto@amacapital.net \
    --cc=mingo@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).