From: Alexander Duyck <alexander.h.duyck@linux.intel.com>
To: linux-mm@kvack.org, akpm@linux-foundation.org,
linux-kernel@vger.kernel.org, linux-nvdimm@lists.01.org
Cc: pavel.tatashin@microsoft.com, mhocko@suse.com,
dave.jiang@intel.com, dave.hansen@intel.com, jglisse@redhat.com,
rppt@linux.vnet.ibm.com, dan.j.williams@intel.com,
logang@deltatee.com, mingo@kernel.org,
kirill.shutemov@linux.intel.com
Subject: [PATCH v5 0/4] Address issues slowing persistent memory initialization
Date: Tue, 25 Sep 2018 13:18:08 -0700 [thread overview]
Message-ID: <20180925200551.3576.18755.stgit@localhost.localdomain> (raw)
This patch set is meant to be a v5 of my earlier submission with the same
title[1].
The main changes from the previous version are that I have added a new
patch to address an issue that had disabled deferred memory init on my
system due to recent config changes related to CONFIG_NO_BOOTMEM. In
addition I dropped the original patches 4 and 5 from the previous set as
that is going to need to be a separate set of patches.
The main thing this patch set achieves is that it allows us to initialize
each node worth of persistent memory independently. As a result we reduce
page init time by about 2 minutes because instead of taking 30 to 40 seconds
per node and going through each node one at a time, we process all 4 nodes
in parallel in the case of a 12TB persistent memory setup spread evenly over
4 nodes.
[1]: https://lkml.org/lkml/2018/9/21/4
---
Alexander Duyck (4):
mm: Remove now defunct NO_BOOTMEM from depends list for deferred init
mm: Provide kernel parameter to allow disabling page init poisoning
mm: Create non-atomic version of SetPageReserved for init use
mm: Defer ZONE_DEVICE page initialization to the point where we init pgmap
Documentation/admin-guide/kernel-parameters.txt | 12 +++
arch/csky/Kconfig | 1
include/linux/mm.h | 2
include/linux/page-flags.h | 9 ++
kernel/memremap.c | 24 ++---
mm/Kconfig | 1
mm/debug.c | 46 ++++++++++
mm/hmm.c | 12 ++-
mm/memblock.c | 5 -
mm/page_alloc.c | 101 ++++++++++++++++++++++-
mm/sparse.c | 4 -
11 files changed, 184 insertions(+), 33 deletions(-)
--
next reply other threads:[~2018-09-25 20:18 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-25 20:18 Alexander Duyck [this message]
2018-09-25 20:19 ` [PATCH v5 1/4] mm: Remove now defunct NO_BOOTMEM from depends list for deferred init Alexander Duyck
2018-09-25 21:05 ` Mike Rapoport
2018-09-25 20:20 ` [PATCH v5 2/4] mm: Provide kernel parameter to allow disabling page init poisoning Alexander Duyck
2018-09-25 20:26 ` Dave Hansen
2018-09-25 20:38 ` Alexander Duyck
2018-09-25 22:14 ` Dave Hansen
2018-09-25 22:27 ` Alexander Duyck
2018-09-26 7:38 ` Michal Hocko
2018-09-26 15:24 ` Alexander Duyck
2018-09-26 15:39 ` Michal Hocko
2018-09-26 15:41 ` Dave Hansen
2018-09-26 16:18 ` Alexander Duyck
2018-09-26 15:36 ` Dave Hansen
2018-09-26 22:36 ` Andrew Morton
2018-09-25 20:20 ` [PATCH v5 3/4] mm: Create non-atomic version of SetPageReserved for init use Alexander Duyck
2018-09-25 20:21 ` [PATCH v5 4/4] mm: Defer ZONE_DEVICE page initialization to the point where we init pgmap Alexander Duyck
2018-09-26 7:55 ` Michal Hocko
2018-09-26 18:25 ` Alexander Duyck
2018-09-26 18:52 ` Dan Williams
2018-09-27 11:20 ` Michal Hocko
2018-09-27 11:09 ` Michal Hocko
2018-09-27 12:25 ` Oscar Salvador
2018-09-27 13:13 ` Michal Hocko
2018-09-27 14:50 ` Oscar Salvador
2018-09-27 15:41 ` David Hildenbrand
2018-09-28 8:12 ` Oscar Salvador
2018-09-28 8:44 ` Oscar Salvador
2018-09-28 15:50 ` Dan Williams
2018-09-27 12:32 ` Oscar Salvador
2018-10-08 21:01 ` Dan Williams
2018-10-08 21:38 ` Alexander Duyck
2018-10-08 22:00 ` Dan Williams
2018-10-08 22:07 ` Alexander Duyck
2018-10-08 22:36 ` Alexander Duyck
2018-10-08 22:59 ` Dan Williams
2018-10-08 23:34 ` [mm PATCH] memremap: Fix reference count for pgmap in devm_memremap_pages Alexander Duyck
2018-10-09 0:20 ` Dan Williams
2018-10-09 17:00 ` [PATCH v5 4/4] mm: Defer ZONE_DEVICE page initialization to the point where we init pgmap Yi Zhang
2018-10-09 18:04 ` Dan Williams
2018-10-09 20:26 ` Alexander Duyck
2018-10-09 21:19 ` Dan Williams
2018-10-10 12:52 ` Yi Zhang
2018-10-10 15:27 ` Alexander Duyck
2018-10-11 8:17 ` Yi Zhang
2018-10-10 9:58 ` Michal Hocko
2018-10-10 16:39 ` Alexander Duyck
2018-10-10 17:24 ` Michal Hocko
2018-10-10 17:39 ` Alexander Duyck
2018-10-10 17:53 ` Michal Hocko
2018-10-10 18:13 ` Alexander Duyck
2018-10-10 18:52 ` Michal Hocko
2018-10-11 8:55 ` Michal Hocko
2018-10-11 17:38 ` Alexander Duyck
2018-10-11 18:22 ` Dan Williams
2018-10-17 7:52 ` Michal Hocko
2018-10-17 15:02 ` Alexander Duyck
2018-10-29 14:12 ` Michal Hocko
2018-10-29 15:59 ` Alexander Duyck
2018-10-29 16:35 ` Michal Hocko
2018-10-29 17:01 ` Alexander Duyck
2018-10-29 17:24 ` Michal Hocko
2018-10-29 17:34 ` Dan Williams
2018-10-29 17:45 ` Michal Hocko
2018-10-29 17:42 ` Alexander Duyck
2018-10-29 18:18 ` Michal Hocko
2018-10-29 19:59 ` Alexander Duyck
2018-10-30 6:29 ` Michal Hocko
2018-10-30 6:55 ` Dan Williams
2018-10-30 8:17 ` Michal Hocko
2018-10-30 15:57 ` Dan Williams
2018-10-30 8:05 ` Oscar Salvador
2018-10-29 15:49 ` Dan Williams
2018-10-29 15:56 ` Michal Hocko
2018-10-10 18:18 ` Dan Williams
2018-10-11 8:39 ` Yi Zhang
2018-10-11 15:38 ` Alexander Duyck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180925200551.3576.18755.stgit@localhost.localdomain \
--to=alexander.h.duyck@linux.intel.com \
--cc=akpm@linux-foundation.org \
--cc=dan.j.williams@intel.com \
--cc=dave.hansen@intel.com \
--cc=dave.jiang@intel.com \
--cc=jglisse@redhat.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-nvdimm@lists.01.org \
--cc=logang@deltatee.com \
--cc=mhocko@suse.com \
--cc=mingo@kernel.org \
--cc=pavel.tatashin@microsoft.com \
--cc=rppt@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).