From: "Kirill A. Shutemov" <kirill@shutemov.name>
To: Matthew Wilcox <willy@infradead.org>
Cc: linux-mm@kvack.org, linux-fsdevel@vger.kernel.org,
Song Liu <songliubraving@fb.com>,
William Kucharski <william.kucharski@oracle.com>,
Johannes Weiner <jweiner@fb.com>
Subject: Re: [PATCH 2/3] mm: Allow large pages to be added to the page cache
Date: Fri, 6 Sep 2019 15:09:44 +0300 [thread overview]
Message-ID: <20190906120944.gm6lncxmkkz6kgjx@box> (raw)
In-Reply-To: <20190905182348.5319-3-willy@infradead.org>
On Thu, Sep 05, 2019 at 11:23:47AM -0700, Matthew Wilcox wrote:
> From: "Matthew Wilcox (Oracle)" <willy@infradead.org>
>
> We return -EEXIST if there are any non-shadow entries in the page
> cache in the range covered by the large page. If there are multiple
> shadow entries in the range, we set *shadowp to one of them (currently
> the one at the highest index). If that turns out to be the wrong
> answer, we can implement something more complex. This is mostly
> modelled after the equivalent function in the shmem code.
>
> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
> ---
> mm/filemap.c | 39 ++++++++++++++++++++++++++++-----------
> 1 file changed, 28 insertions(+), 11 deletions(-)
>
> diff --git a/mm/filemap.c b/mm/filemap.c
> index 041c77c4ca56..ae3c0a70a8e9 100644
> --- a/mm/filemap.c
> +++ b/mm/filemap.c
> @@ -850,6 +850,7 @@ static int __add_to_page_cache_locked(struct page *page,
> int huge = PageHuge(page);
> struct mem_cgroup *memcg;
> int error;
> + unsigned int nr = 1;
> void *old;
>
> VM_BUG_ON_PAGE(!PageLocked(page), page);
> @@ -861,31 +862,47 @@ static int __add_to_page_cache_locked(struct page *page,
> gfp_mask, &memcg, false);
> if (error)
> return error;
> + xas_set_order(&xas, offset, compound_order(page));
> + nr = compound_nr(page);
> }
>
> - get_page(page);
> + page_ref_add(page, nr);
> page->mapping = mapping;
> page->index = offset;
>
> do {
> + unsigned long exceptional = 0;
> + unsigned int i = 0;
> +
> xas_lock_irq(&xas);
> - old = xas_load(&xas);
> - if (old && !xa_is_value(old))
> + xas_for_each_conflict(&xas, old) {
> + if (!xa_is_value(old))
> + break;
> + exceptional++;
> + if (shadowp)
> + *shadowp = old;
> + }
> + if (old) {
> xas_set_err(&xas, -EEXIST);
> - xas_store(&xas, page);
> + break;
> + }
> + xas_create_range(&xas);
> if (xas_error(&xas))
> goto unlock;
>
> - if (xa_is_value(old)) {
> - mapping->nrexceptional--;
> - if (shadowp)
> - *shadowp = old;
> +next:
> + xas_store(&xas, page);
> + if (++i < nr) {
> + xas_next(&xas);
> + goto next;
> }
Can we have a proper loop here instead of goto?
do {
xas_store(&xas, page);
/* Do not move xas ouside the range */
if (++i != nr)
xas_next(&xas);
} while (i < nr);
> - mapping->nrpages++;
> + mapping->nrexceptional -= exceptional;
> + mapping->nrpages += nr;
>
> /* hugetlb pages do not participate in page cache accounting */
> if (!huge)
> - __inc_node_page_state(page, NR_FILE_PAGES);
> + __mod_node_page_state(page_pgdat(page), NR_FILE_PAGES,
> + nr);
> unlock:
> xas_unlock_irq(&xas);
> } while (xas_nomem(&xas, gfp_mask & GFP_RECLAIM_MASK));
> @@ -902,7 +919,7 @@ static int __add_to_page_cache_locked(struct page *page,
> /* Leave page->index set: truncation relies upon it */
> if (!huge)
> mem_cgroup_cancel_charge(page, memcg, false);
> - put_page(page);
> + page_ref_sub(page, nr);
> return xas_error(&xas);
> }
> ALLOW_ERROR_INJECTION(__add_to_page_cache_locked, ERRNO);
> --
> 2.23.0.rc1
>
--
Kirill A. Shutemov
next prev parent reply other threads:[~2019-09-06 12:09 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-05 18:23 [PATCH 0/3] Large pages in the page cache Matthew Wilcox
2019-09-05 18:23 ` [PATCH 1/3] mm: Add __page_cache_alloc_order Matthew Wilcox
2019-09-05 18:58 ` Song Liu
2019-09-05 19:02 ` Matthew Wilcox
2019-09-05 19:06 ` Song Liu
2019-09-05 18:23 ` [PATCH 2/3] mm: Allow large pages to be added to the page cache Matthew Wilcox
2019-09-05 18:28 ` Matthew Wilcox
2019-09-05 20:56 ` kbuild test robot
2019-09-06 12:09 ` Kirill A. Shutemov [this message]
2019-09-06 13:31 ` Matthew Wilcox
2019-09-05 18:23 ` [PATCH 3/3] mm: Allow find_get_page to be used for large pages Matthew Wilcox
2019-09-05 21:41 ` kbuild test robot
2019-09-05 22:04 ` kbuild test robot
2019-09-05 22:12 ` Matthew Wilcox
2019-09-09 0:42 ` [kbuild-all] " Rong Chen
2019-09-09 1:12 ` Matthew Wilcox
2019-09-06 12:59 ` Kirill A. Shutemov
2019-09-06 13:41 ` Matthew Wilcox
2019-09-06 13:52 ` Kirill A. Shutemov
2019-09-06 15:22 ` Matthew Wilcox
2019-09-06 15:59 ` [PATCH 4/3] Prepare transhuge pages properly Matthew Wilcox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190906120944.gm6lncxmkkz6kgjx@box \
--to=kirill@shutemov.name \
--cc=jweiner@fb.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=songliubraving@fb.com \
--cc=william.kucharski@oracle.com \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).