* [patch 01/67] ocfs2: fix oops when writing cloned file
2020-02-04 1:33 incoming Andrew Morton
@ 2020-02-04 1:33 ` Andrew Morton
2020-02-04 1:33 ` [patch 02/67] mm/page_alloc.c: fix uninitialized memmaps on a partially populated last section Andrew Morton
` (68 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:33 UTC (permalink / raw)
To: akpm, gechangwei, ghe, jlbec, joseph.qi, junxiao.bi, linux-mm,
mark, mm-commits, piaojun, stable, torvalds
From: Gang He <GHe@suse.com>
Subject: ocfs2: fix oops when writing cloned file
Writing a cloned file triggers a kernel oops and the user-space command
process is also killed by the system. The bug can be reproduced stably
via:
1) create a file under ocfs2 file system directory.
journalctl -b > aa.txt
2) create a cloned file for this file.
reflink aa.txt bb.txt
3) write the cloned file with dd command.
dd if=/dev/zero of=bb.txt bs=512 count=1 conv=notrunc
The dd command is killed by the kernel, then you can see the oops message
via dmesg command.
[ 463.875404] BUG: kernel NULL pointer dereference, address: 0000000000000028
[ 463.875413] #PF: supervisor read access in kernel mode
[ 463.875416] #PF: error_code(0x0000) - not-present page
[ 463.875418] PGD 0 P4D 0
[ 463.875425] Oops: 0000 [#1] SMP PTI
[ 463.875431] CPU: 1 PID: 2291 Comm: dd Tainted: G OE 5.3.16-2-default
[ 463.875433] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[ 463.875500] RIP: 0010:ocfs2_refcount_cow+0xa4/0x5d0 [ocfs2]
[ 463.875505] Code: 06 89 6c 24 38 89 eb f6 44 24 3c 02 74 be 49 8b 47 28
[ 463.875508] RSP: 0018:ffffa2cb409dfce8 EFLAGS: 00010202
[ 463.875512] RAX: ffff8b1ebdca8000 RBX: 0000000000000001 RCX: ffff8b1eb73a9df0
[ 463.875515] RDX: 0000000000056a01 RSI: 0000000000000000 RDI: 0000000000000000
[ 463.875517] RBP: 0000000000000001 R08: ffff8b1eb73a9de0 R09: 0000000000000000
[ 463.875520] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
[ 463.875522] R13: ffff8b1eb922f048 R14: 0000000000000000 R15: ffff8b1eb922f048
[ 463.875526] FS: 00007f8f44d15540(0000) GS:ffff8b1ebeb00000(0000) knlGS:0000000000000000
[ 463.875529] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 463.875532] CR2: 0000000000000028 CR3: 000000003c17a000 CR4: 00000000000006e0
[ 463.875546] Call Trace:
[ 463.875596] ? ocfs2_inode_lock_full_nested+0x18b/0x960 [ocfs2]
[ 463.875648] ocfs2_file_write_iter+0xaf8/0xc70 [ocfs2]
[ 463.875672] new_sync_write+0x12d/0x1d0
[ 463.875688] vfs_write+0xad/0x1a0
[ 463.875697] ksys_write+0xa1/0xe0
[ 463.875710] do_syscall_64+0x60/0x1f0
[ 463.875743] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 463.875758] RIP: 0033:0x7f8f4482ed44
[ 463.875762] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00
[ 463.875765] RSP: 002b:00007fff300a79d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 463.875769] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8f4482ed44
[ 463.875771] RDX: 0000000000000200 RSI: 000055f771b5c000 RDI: 0000000000000001
[ 463.875774] RBP: 0000000000000200 R08: 00007f8f44af9c78 R09: 0000000000000003
[ 463.875776] R10: 000000000000089f R11: 0000000000000246 R12: 000055f771b5c000
[ 463.875779] R13: 0000000000000200 R14: 0000000000000000 R15: 000055f771b5c000
This regression problem was introduced by commit e74540b28556 ("ocfs2:
protect extent tree in ocfs2_prepare_inode_for_write()").
Link: http://lkml.kernel.org/r/20200121050153.13290-1-ghe@suse.com
Fixes: e74540b28556 ("ocfs2: protect extent tree in ocfs2_prepare_inode_for_write()").
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
fs/ocfs2/file.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
--- a/fs/ocfs2/file.c~ocfs2-fix-the-oops-problem-when-write-cloned-file
+++ a/fs/ocfs2/file.c
@@ -2101,17 +2101,15 @@ static int ocfs2_is_io_unaligned(struct
static int ocfs2_inode_lock_for_extent_tree(struct inode *inode,
struct buffer_head **di_bh,
int meta_level,
- int overwrite_io,
int write_sem,
int wait)
{
int ret = 0;
if (wait)
- ret = ocfs2_inode_lock(inode, NULL, meta_level);
+ ret = ocfs2_inode_lock(inode, di_bh, meta_level);
else
- ret = ocfs2_try_inode_lock(inode,
- overwrite_io ? NULL : di_bh, meta_level);
+ ret = ocfs2_try_inode_lock(inode, di_bh, meta_level);
if (ret < 0)
goto out;
@@ -2136,6 +2134,7 @@ static int ocfs2_inode_lock_for_extent_t
out_unlock:
brelse(*di_bh);
+ *di_bh = NULL;
ocfs2_inode_unlock(inode, meta_level);
out:
return ret;
@@ -2177,7 +2176,6 @@ static int ocfs2_prepare_inode_for_write
ret = ocfs2_inode_lock_for_extent_tree(inode,
&di_bh,
meta_level,
- overwrite_io,
write_sem,
wait);
if (ret < 0) {
@@ -2233,13 +2231,13 @@ static int ocfs2_prepare_inode_for_write
&di_bh,
meta_level,
write_sem);
+ meta_level = 1;
+ write_sem = 1;
ret = ocfs2_inode_lock_for_extent_tree(inode,
&di_bh,
meta_level,
- overwrite_io,
- 1,
+ write_sem,
wait);
- write_sem = 1;
if (ret < 0) {
if (ret != -EAGAIN)
mlog_errno(ret);
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 02/67] mm/page_alloc.c: fix uninitialized memmaps on a partially populated last section
2020-02-04 1:33 incoming Andrew Morton
2020-02-04 1:33 ` [patch 01/67] ocfs2: fix oops when writing cloned file Andrew Morton
@ 2020-02-04 1:33 ` Andrew Morton
2020-02-04 1:33 ` [patch 03/67] fs/proc/page.c: allow inspection of last section and fix end detection Andrew Morton
` (67 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:33 UTC (permalink / raw)
To: adobriyan, akpm, bob.picco, dan.j.williams, daniel.m.jordan,
david, linux-mm, mhocko, mhocko, mm-commits, n-horiguchi,
osalvador, pasha.tatashin, sfr, stable, steven.sistare, torvalds
From: David Hildenbrand <david@redhat.com>
Subject: mm/page_alloc.c: fix uninitialized memmaps on a partially populated last section
Patch series "mm: fix max_pfn not falling on section boundary", v2.
Playing with different memory sizes for a x86-64 guest, I discovered that
some memmaps (highest section if max_mem does not fall on the section
boundary) are marked as being valid and online, but contain garbage. We
have to properly initialize these memmaps.
Looking at /proc/kpageflags and friends, I found some more issues,
partially related to this.
This patch (of 3):
If max_pfn is not aligned to a section boundary, we can easily run into
BUGs. This can e.g., be triggered on x86-64 under QEMU by specifying a
memory size that is not a multiple of 128MB (e.g., 4097MB, but also
4160MB). I was told that on real HW, we can easily have this scenario
(esp., one of the main reasons sub-section hotadd of devmem was added).
The issue is, that we have a valid memmap (pfn_valid()) for the whole
section, and the whole section will be marked "online".
pfn_to_online_page() will succeed, but the memmap contains garbage.
E.g., doing a "./page-types -r -a 0x144001" when QEMU was started with "-m
4160M" - (see tools/vm/page-types.c):
[ 200.476376] BUG: unable to handle page fault for address: fffffffffffffffe
[ 200.477500] #PF: supervisor read access in kernel mode
[ 200.478334] #PF: error_code(0x0000) - not-present page
[ 200.479076] PGD 59614067 P4D 59614067 PUD 59616067 PMD 0
[ 200.479557] Oops: 0000 [#4] SMP NOPTI
[ 200.479875] CPU: 0 PID: 603 Comm: page-types Tainted: G D W 5.5.0-rc1-next-20191209 #93
[ 200.480646] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu4
[ 200.481648] RIP: 0010:stable_page_flags+0x4d/0x410
[ 200.482061] Code: f3 ff 41 89 c0 48 b8 00 00 00 00 01 00 00 00 45 84 c0 0f 85 cd 02 00 00 48 8b 53 08 48 8b 2b 48f
[ 200.483644] RSP: 0018:ffffb139401cbe60 EFLAGS: 00010202
[ 200.484091] RAX: fffffffffffffffe RBX: fffffbeec5100040 RCX: 0000000000000000
[ 200.484697] RDX: 0000000000000001 RSI: ffffffff9535c7cd RDI: 0000000000000246
[ 200.485313] RBP: ffffffffffffffff R08: 0000000000000000 R09: 0000000000000000
[ 200.485917] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000144001
[ 200.486523] R13: 00007ffd6ba55f48 R14: 00007ffd6ba55f40 R15: ffffb139401cbf08
[ 200.487130] FS: 00007f68df717580(0000) GS:ffff9ec77fa00000(0000) knlGS:0000000000000000
[ 200.487804] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 200.488295] CR2: fffffffffffffffe CR3: 0000000135d48000 CR4: 00000000000006f0
[ 200.488897] Call Trace:
[ 200.489115] kpageflags_read+0xe9/0x140
[ 200.489447] proc_reg_read+0x3c/0x60
[ 200.489755] vfs_read+0xc2/0x170
[ 200.490037] ksys_pread64+0x65/0xa0
[ 200.490352] do_syscall_64+0x5c/0xa0
[ 200.490665] entry_SYSCALL_64_after_hwframe+0x49/0xbe
But it can be triggered much easier via "cat /proc/kpageflags > /dev/null"
after cold/hot plugging a DIMM to such a system:
[root@localhost ~]# cat /proc/kpageflags > /dev/null
[ 111.517275] BUG: unable to handle page fault for address: fffffffffffffffe
[ 111.517907] #PF: supervisor read access in kernel mode
[ 111.518333] #PF: error_code(0x0000) - not-present page
[ 111.518771] PGD a240e067 P4D a240e067 PUD a2410067 PMD 0
This patch fixes that by at least zero-ing out that memmap (so e.g.,
page_to_pfn() will not crash). Commit 907ec5fca3dc ("mm: zero remaining
unavailable struct pages") tried to fix a similar issue, but forgot to
consider this special case.
After this patch, there are still problems to solve. E.g., not all of
these pages falling into a memory hole will actually get initialized later
and set PageReserved - they are only zeroed out - but at least the
immediate crashes are gone. A follow-up patch will take care of this.
Link: http://lkml.kernel.org/r/20191211163201.17179-2-david@redhat.com
Fixes: f7f99100d8d9 ("mm: stop zeroing memory during allocation in vmemmap")
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Bob Picco <bob.picco@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: <stable@vger.kernel.org> [4.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
mm/page_alloc.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
--- a/mm/page_alloc.c~mm-fix-uninitialized-memmaps-on-a-partially-populated-last-section
+++ a/mm/page_alloc.c
@@ -6947,7 +6947,8 @@ static u64 zero_pfn_range(unsigned long
* This function also addresses a similar issue where struct pages are left
* uninitialized because the physical address range is not covered by
* memblock.memory or memblock.reserved. That could happen when memblock
- * layout is manually configured via memmap=.
+ * layout is manually configured via memmap=, or when the highest physical
+ * address (max_pfn) does not end on a section boundary.
*/
void __init zero_resv_unavail(void)
{
@@ -6965,7 +6966,16 @@ void __init zero_resv_unavail(void)
pgcnt += zero_pfn_range(PFN_DOWN(next), PFN_UP(start));
next = end;
}
- pgcnt += zero_pfn_range(PFN_DOWN(next), max_pfn);
+
+ /*
+ * Early sections always have a fully populated memmap for the whole
+ * section - see pfn_valid(). If the last section has holes at the
+ * end and that section is marked "online", the memmap will be
+ * considered initialized. Make sure that memmap has a well defined
+ * state.
+ */
+ pgcnt += zero_pfn_range(PFN_DOWN(next),
+ round_up(max_pfn, PAGES_PER_SECTION));
/*
* Struct pages that do not have backing memory. This could be because
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 03/67] fs/proc/page.c: allow inspection of last section and fix end detection
2020-02-04 1:33 incoming Andrew Morton
2020-02-04 1:33 ` [patch 01/67] ocfs2: fix oops when writing cloned file Andrew Morton
2020-02-04 1:33 ` [patch 02/67] mm/page_alloc.c: fix uninitialized memmaps on a partially populated last section Andrew Morton
@ 2020-02-04 1:33 ` Andrew Morton
2020-02-04 1:33 ` [patch 04/67] mm/page_alloc.c: initialize memmap of unavailable memory directly Andrew Morton
` (66 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:33 UTC (permalink / raw)
To: adobriyan, akpm, bob.picco, dan.j.williams, daniel.m.jordan,
david, linux-mm, mhocko, mhocko, mm-commits, n-horiguchi,
osalvador, pasha.tatashin, sfr, steven.sistare, torvalds
From: David Hildenbrand <david@redhat.com>
Subject: fs/proc/page.c: allow inspection of last section and fix end detection
If max_pfn does not fall onto a section boundary, it is possible to
inspect PFNs up to max_pfn, and PFNs above max_pfn, however, max_pfn
itself can't be inspected. We can have a valid (and online) memmap at and
above max_pfn if max_pfn is not aligned to a section boundary. The whole
early section has a memmap and is marked online. Being able to inspect
the state of these PFNs is valuable for debugging, especially because
max_pfn can change on memory hotplug and expose these memmaps.
Also, querying page flags via "./page-types -r -a 0x144001,"
(tools/vm/page-types.c) inside a x86-64 guest with 4160MB under QEMU
results in an (almost) endless loop in user space, because the end is not
detected properly when starting after max_pfn.
Instead, let's allow to inspect all pages in the highest section and
return 0 directly if we try to access pages above that section.
While at it, check the count before adjusting it, to avoid masking user
errors.
Link: http://lkml.kernel.org/r/20191211163201.17179-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Bob Picco <bob.picco@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
fs/proc/page.c | 30 +++++++++++++++++++++++++++---
1 file changed, 27 insertions(+), 3 deletions(-)
--- a/fs/proc/page.c~fs-proc-pagec-allow-inspection-of-last-section-and-fix-end-detection
+++ a/fs/proc/page.c
@@ -21,6 +21,21 @@
#define KPMMASK (KPMSIZE - 1)
#define KPMBITS (KPMSIZE * BITS_PER_BYTE)
+static inline unsigned long get_max_dump_pfn(void)
+{
+#ifdef CONFIG_SPARSEMEM
+ /*
+ * The memmap of early sections is completely populated and marked
+ * online even if max_pfn does not fall on a section boundary -
+ * pfn_to_online_page() will succeed on all pages. Allow inspecting
+ * these memmaps.
+ */
+ return round_up(max_pfn, PAGES_PER_SECTION);
+#else
+ return max_pfn;
+#endif
+}
+
/* /proc/kpagecount - an array exposing page counts
*
* Each entry is a u64 representing the corresponding
@@ -29,6 +44,7 @@
static ssize_t kpagecount_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
+ const unsigned long max_dump_pfn = get_max_dump_pfn();
u64 __user *out = (u64 __user *)buf;
struct page *ppage;
unsigned long src = *ppos;
@@ -37,9 +53,11 @@ static ssize_t kpagecount_read(struct fi
u64 pcount;
pfn = src / KPMSIZE;
- count = min_t(size_t, count, (max_pfn * KPMSIZE) - src);
if (src & KPMMASK || count & KPMMASK)
return -EINVAL;
+ if (src >= max_dump_pfn * KPMSIZE)
+ return 0;
+ count = min_t(unsigned long, count, (max_dump_pfn * KPMSIZE) - src);
while (count > 0) {
/*
@@ -206,6 +224,7 @@ u64 stable_page_flags(struct page *page)
static ssize_t kpageflags_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
+ const unsigned long max_dump_pfn = get_max_dump_pfn();
u64 __user *out = (u64 __user *)buf;
struct page *ppage;
unsigned long src = *ppos;
@@ -213,9 +232,11 @@ static ssize_t kpageflags_read(struct fi
ssize_t ret = 0;
pfn = src / KPMSIZE;
- count = min_t(unsigned long, count, (max_pfn * KPMSIZE) - src);
if (src & KPMMASK || count & KPMMASK)
return -EINVAL;
+ if (src >= max_dump_pfn * KPMSIZE)
+ return 0;
+ count = min_t(unsigned long, count, (max_dump_pfn * KPMSIZE) - src);
while (count > 0) {
/*
@@ -251,6 +272,7 @@ static const struct file_operations proc
static ssize_t kpagecgroup_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
+ const unsigned long max_dump_pfn = get_max_dump_pfn();
u64 __user *out = (u64 __user *)buf;
struct page *ppage;
unsigned long src = *ppos;
@@ -259,9 +281,11 @@ static ssize_t kpagecgroup_read(struct f
u64 ino;
pfn = src / KPMSIZE;
- count = min_t(unsigned long, count, (max_pfn * KPMSIZE) - src);
if (src & KPMMASK || count & KPMMASK)
return -EINVAL;
+ if (src >= max_dump_pfn * KPMSIZE)
+ return 0;
+ count = min_t(unsigned long, count, (max_dump_pfn * KPMSIZE) - src);
while (count > 0) {
/*
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 04/67] mm/page_alloc.c: initialize memmap of unavailable memory directly
2020-02-04 1:33 incoming Andrew Morton
` (2 preceding siblings ...)
2020-02-04 1:33 ` [patch 03/67] fs/proc/page.c: allow inspection of last section and fix end detection Andrew Morton
@ 2020-02-04 1:33 ` Andrew Morton
2020-02-04 1:33 ` [patch 05/67] mm/page_alloc: fix and rework pfn handling in memmap_init_zone() Andrew Morton
` (65 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:33 UTC (permalink / raw)
To: adobriyan, akpm, bob.picco, dan.j.williams, daniel.m.jordan,
david, linux-mm, mhocko, mhocko, mm-commits, n-horiguchi,
osalvador, pasha.tatashin, sfr, steven.sistare, torvalds
From: David Hildenbrand <david@redhat.com>
Subject: mm/page_alloc.c: initialize memmap of unavailable memory directly
Let's make sure that all memory holes are actually marked PageReserved(),
that page_to_pfn() produces reliable results, and that these pages are not
detected as "mmap" pages due to the mapcount.
E.g., booting a x86-64 QEMU guest with 4160 MB:
[ 0.010585] Early memory node ranges
[ 0.010586] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.010588] node 0: [mem 0x0000000000100000-0x00000000bffdefff]
[ 0.010589] node 0: [mem 0x0000000100000000-0x0000000143ffffff]
max_pfn is 0x144000.
Before this change:
[root@localhost ~]# ./page-types -r -a 0x144000,
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000800 16384 64 ___________M_______________________________ mmap
total 16384 64
After this change:
[root@localhost ~]# ./page-types -r -a 0x144000,
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000100000000 16384 64 ___________________________r_______________ reserved
total 16384 64
IOW, especially the unavailable physical memory ("memory hole") in the
last section would not get properly marked PageReserved() and is indicated
to be "mmap" memory.
Drop the trace of that function from include/linux/mm.h - nobody else
needs it, and rename it accordingly.
Note: The fake zone/node might not be covered by the zone/node span. This
is not an urgent issue (for now, we had the same node/zone due to the
zeroing). We'll need a clean way to mark memory holes (e.g., using a page
type PageHole() if possible or a fake ZONE_INVALID) and eventually stop
marking these memory holes PageReserved().
Link: http://lkml.kernel.org/r/20191211163201.17179-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Bob Picco <bob.picco@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/linux/mm.h | 6 ------
mm/page_alloc.c | 33 ++++++++++++++++++++++-----------
2 files changed, 22 insertions(+), 17 deletions(-)
--- a/include/linux/mm.h~mm-initialize-memmap-of-unavailable-memory-directly
+++ a/include/linux/mm.h
@@ -2182,12 +2182,6 @@ extern int __meminit __early_pfn_to_nid(
struct mminit_pfnnid_cache *state);
#endif
-#if !defined(CONFIG_FLAT_NODE_MEM_MAP)
-void zero_resv_unavail(void);
-#else
-static inline void zero_resv_unavail(void) {}
-#endif
-
extern void set_dma_reserve(unsigned long new_dma_reserve);
extern void memmap_init_zone(unsigned long, int, unsigned long, unsigned long,
enum memmap_context, struct vmem_altmap *);
--- a/mm/page_alloc.c~mm-initialize-memmap-of-unavailable-memory-directly
+++ a/mm/page_alloc.c
@@ -6916,10 +6916,10 @@ void __init free_area_init_node(int nid,
#if !defined(CONFIG_FLAT_NODE_MEM_MAP)
/*
- * Zero all valid struct pages in range [spfn, epfn), return number of struct
- * pages zeroed
+ * Initialize all valid struct pages in the range [spfn, epfn) and mark them
+ * PageReserved(). Return the number of struct pages that were initialized.
*/
-static u64 zero_pfn_range(unsigned long spfn, unsigned long epfn)
+static u64 __init init_unavailable_range(unsigned long spfn, unsigned long epfn)
{
unsigned long pfn;
u64 pgcnt = 0;
@@ -6930,7 +6930,13 @@ static u64 zero_pfn_range(unsigned long
+ pageblock_nr_pages - 1;
continue;
}
- mm_zero_struct_page(pfn_to_page(pfn));
+ /*
+ * Use a fake node/zone (0) for now. Some of these pages
+ * (in memblock.reserved but not in memblock.memory) will
+ * get re-initialized via reserve_bootmem_region() later.
+ */
+ __init_single_page(pfn_to_page(pfn), pfn, 0, 0);
+ __SetPageReserved(pfn_to_page(pfn));
pgcnt++;
}
@@ -6942,7 +6948,7 @@ static u64 zero_pfn_range(unsigned long
* initialized by going through __init_single_page(). But, there are some
* struct pages which are reserved in memblock allocator and their fields
* may be accessed (for example page_to_pfn() on some configuration accesses
- * flags). We must explicitly zero those struct pages.
+ * flags). We must explicitly initialize those struct pages.
*
* This function also addresses a similar issue where struct pages are left
* uninitialized because the physical address range is not covered by
@@ -6950,7 +6956,7 @@ static u64 zero_pfn_range(unsigned long
* layout is manually configured via memmap=, or when the highest physical
* address (max_pfn) does not end on a section boundary.
*/
-void __init zero_resv_unavail(void)
+static void __init init_unavailable_mem(void)
{
phys_addr_t start, end;
u64 i, pgcnt;
@@ -6963,7 +6969,8 @@ void __init zero_resv_unavail(void)
for_each_mem_range(i, &memblock.memory, NULL,
NUMA_NO_NODE, MEMBLOCK_NONE, &start, &end, NULL) {
if (next < start)
- pgcnt += zero_pfn_range(PFN_DOWN(next), PFN_UP(start));
+ pgcnt += init_unavailable_range(PFN_DOWN(next),
+ PFN_UP(start));
next = end;
}
@@ -6974,8 +6981,8 @@ void __init zero_resv_unavail(void)
* considered initialized. Make sure that memmap has a well defined
* state.
*/
- pgcnt += zero_pfn_range(PFN_DOWN(next),
- round_up(max_pfn, PAGES_PER_SECTION));
+ pgcnt += init_unavailable_range(PFN_DOWN(next),
+ round_up(max_pfn, PAGES_PER_SECTION));
/*
* Struct pages that do not have backing memory. This could be because
@@ -6984,6 +6991,10 @@ void __init zero_resv_unavail(void)
if (pgcnt)
pr_info("Zeroed struct page in unavailable ranges: %lld pages", pgcnt);
}
+#else
+static inline void __init init_unavailable_mem(void)
+{
+}
#endif /* !CONFIG_FLAT_NODE_MEM_MAP */
#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
@@ -7413,7 +7424,7 @@ void __init free_area_init_nodes(unsigne
/* Initialise every node */
mminit_verify_pageflags_layout();
setup_nr_node_ids();
- zero_resv_unavail();
+ init_unavailable_mem();
for_each_online_node(nid) {
pg_data_t *pgdat = NODE_DATA(nid);
free_area_init_node(nid, NULL,
@@ -7608,7 +7619,7 @@ void __init set_dma_reserve(unsigned lon
void __init free_area_init(unsigned long *zones_size)
{
- zero_resv_unavail();
+ init_unavailable_mem();
free_area_init_node(0, zones_size,
__pa(PAGE_OFFSET) >> PAGE_SHIFT, NULL);
}
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 05/67] mm/page_alloc: fix and rework pfn handling in memmap_init_zone()
2020-02-04 1:33 incoming Andrew Morton
` (3 preceding siblings ...)
2020-02-04 1:33 ` [patch 04/67] mm/page_alloc.c: initialize memmap of unavailable memory directly Andrew Morton
@ 2020-02-04 1:33 ` Andrew Morton
2020-02-04 2:45 ` Linus Torvalds
2020-02-04 1:34 ` [patch 06/67] mm: factor out next_present_section_nr() Andrew Morton
` (64 subsequent siblings)
69 siblings, 1 reply; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:33 UTC (permalink / raw)
To: akpm, alexander.h.duyck, bhe, dan.j.williams, david,
kirill.shutemov, kirill, linux-mm, mgorman, mhocko, mhocko,
mm-commits, osalvador, pasha.tatashin, torvalds, vbabka, zhi.jin
From: David Hildenbrand <david@redhat.com>
Subject: mm/page_alloc: fix and rework pfn handling in memmap_init_zone()
Let's update the pfn manually whenever we continue the loop. This makes
the code easier to read but also less error prone (and we can directly fix
one issue).
When overlap_memmap_init() returns true, pfn is updated to
"memblock_region_memory_end_pfn(r)". So it already points at the *next*
pfn to process. Incrementing the pfn another time is wrong, we might
leave one uninitialized. I spotted this by inspecting the code, so I have
no idea if this is relevant in practise (with kernelcore=3Dmirror).
Link: http://lkml.kernel.org/r/20200113144035.10848-2-david@redhat.com
Fixes: a9a9e77fbf27 ("mm: move mirrored memory specific code outside of m=
emmap_init_zone")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Jin, Zhi" <zhi.jin@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
mm/page_alloc.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/mm/page_alloc.c~mm-page_alloc-fix-and-rework-pfn-handling-in-memmap_init_zone
+++ a/mm/page_alloc.c
@@ -5905,18 +5905,20 @@ void __meminit memmap_init_zone(unsigned
}
#endif
- for (pfn = start_pfn; pfn < end_pfn; pfn++) {
+ for (pfn = start_pfn; pfn < end_pfn; ) {
/*
* There can be holes in boot-time mem_map[]s handed to this
* function. They do not exist on hotplugged memory.
*/
if (context == MEMMAP_EARLY) {
if (!early_pfn_valid(pfn)) {
- pfn = next_pfn(pfn) - 1;
+ pfn = next_pfn(pfn);
continue;
}
- if (!early_pfn_in_nid(pfn, nid))
+ if (!early_pfn_in_nid(pfn, nid)) {
+ pfn++;
continue;
+ }
if (overlap_memmap_init(zone, &pfn))
continue;
if (defer_init(nid, pfn, end_pfn))
@@ -5944,6 +5946,7 @@ void __meminit memmap_init_zone(unsigned
set_pageblock_migratetype(page, MIGRATE_MOVABLE);
cond_resched();
}
+ pfn++;
}
}
_
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: [patch 05/67] mm/page_alloc: fix and rework pfn handling in memmap_init_zone()
2020-02-04 1:33 ` [patch 05/67] mm/page_alloc: fix and rework pfn handling in memmap_init_zone() Andrew Morton
@ 2020-02-04 2:45 ` Linus Torvalds
0 siblings, 0 replies; 95+ messages in thread
From: Linus Torvalds @ 2020-02-04 2:45 UTC (permalink / raw)
To: Andrew Morton
Cc: Alexander Duyck, Baoquan He, Dan Williams, David Hildenbrand,
Kirill A . Shutemov, Kirill A . Shutemov, Linux-MM, Mel Gorman,
Michal Hocko, Michal Hocko, mm-commits, osalvador,
Pavel Tatashin, Vlastimil Babka, zhi.jin
Anxdrew,
this whole patch-series seems to be corrupt. Not only was the
"incoming" cover emal missing the base to apply it to, but the patches
themselves are broken too.
See for example this one:
On Tue, Feb 4, 2020 at 1:34 AM Andrew Morton <akpm@linux-foundation.org> wrote:
>
> From: David Hildenbrand <david@redhat.com>
> Subject: mm/page_alloc: fix and rework pfn handling in memmap_init_zone()
>
> Let's update the pfn manually whenever we continue the loop. This makes
> the code easier to read but also less error prone (and we can directly fix
> one issue).
>
> When overlap_memmap_init() returns true, pfn is updated to
> "memblock_region_memory_end_pfn(r)". So it already points at the *next*
> pfn to process. Incrementing the pfn another time is wrong, we might
> leave one uninitialized. I spotted this by inspecting the code, so I have
> no idea if this is relevant in practise (with kernelcore=3Dmirror).
Note that "=3D". That's some MIME stuff that you haven't decoded, and
then sent out as an email as-is.
> Link: http://lkml.kernel.org/r/20200113144035.10848-2-david@redhat.com
> Fixes: a9a9e77fbf27 ("mm: move mirrored memory specific code outside of m=
> emmap_init_zone")
Same here. That "=\n" shouldn't be in the email, it comes from some
original MIME data that wasn't ever properly decoded.
The *patch* itself seems fine, and the "=" signs are not mime:
> - for (pfn = start_pfn; pfn < end_pfn; pfn++) {
> + for (pfn = start_pfn; pfn < end_pfn; ) {
so it seems that only the actual explanations have gotten corrupted somehow.
Cut-and-paste from some MIME source in a MUA that doesn't know mime?
Or directly from some mbox file without any MIME decoding?
Linus
^ permalink raw reply [flat|nested] 95+ messages in thread
* [patch 06/67] mm: factor out next_present_section_nr()
2020-02-04 1:33 incoming Andrew Morton
` (4 preceding siblings ...)
2020-02-04 1:33 ` [patch 05/67] mm/page_alloc: fix and rework pfn handling in memmap_init_zone() Andrew Morton
@ 2020-02-04 1:34 ` Andrew Morton
2020-02-04 3:04 ` Linus Torvalds
2020-02-04 1:34 ` [patch 07/67] mm/memmap_init: update variable name in memmap_init_zone Andrew Morton
` (63 subsequent siblings)
69 siblings, 1 reply; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:34 UTC (permalink / raw)
To: akpm, bhe, dan.j.williams, david, kirill.shutemov, kirill,
linux-mm, mgorman, mhocko, mhocko, mm-commits, osalvador,
pasha.tatashin, torvalds, vbabka, zhi.jin
From: David Hildenbrand <david@redhat.com>
Subject: mm: factor out next_present_section_nr()
Let's move it to the header and use the shorter variant from
mm/page_alloc.c (the original one will also check
"__highest_present_section_nr + 1", which is not necessary). While at it,
make the section_nr in next_pfn() const.
In next_pfn(), we now return section_nr_to_pfn(-1) instead of -1 once we
exceed __highest_present_section_nr, which doesn't make a difference i= n
the caller as it is big enough (>=3D all sane end_pfn).
Link: http://lkml.kernel.org/r/20200113144035.10848-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "Jin, Zhi" <zhi.jin@intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/linux/mmzone.h | 10 ++++++++++
mm/page_alloc.c | 11 ++---------
mm/sparse.c | 10 ----------
3 files changed, 12 insertions(+), 19 deletions(-)
--- a/include/linux/mmzone.h~mm-factor-out-next_present_section_nr
+++ a/include/linux/mmzone.h
@@ -1379,6 +1379,16 @@ static inline int pfn_present(unsigned l
return present_section(__nr_to_section(pfn_to_section_nr(pfn)));
}
+static inline unsigned long next_present_section_nr(unsigned long section_nr)
+{
+ while (++section_nr <= __highest_present_section_nr) {
+ if (present_section_nr(section_nr))
+ return section_nr;
+ }
+
+ return -1;
+}
+
/*
* These are _only_ used during initialisation, therefore they
* can use __initdata ... They could have names to indicate
--- a/mm/page_alloc.c~mm-factor-out-next_present_section_nr
+++ a/mm/page_alloc.c
@@ -5852,18 +5852,11 @@ overlap_memmap_init(unsigned long zone,
/* Skip PFNs that belong to non-present sections */
static inline __meminit unsigned long next_pfn(unsigned long pfn)
{
- unsigned long section_nr;
+ const unsigned long section_nr = pfn_to_section_nr(++pfn);
- section_nr = pfn_to_section_nr(++pfn);
if (present_section_nr(section_nr))
return pfn;
-
- while (++section_nr <= __highest_present_section_nr) {
- if (present_section_nr(section_nr))
- return section_nr_to_pfn(section_nr);
- }
-
- return -1;
+ return section_nr_to_pfn(next_present_section_nr(section_nr));
}
#else
static inline __meminit unsigned long next_pfn(unsigned long pfn)
--- a/mm/sparse.c~mm-factor-out-next_present_section_nr
+++ a/mm/sparse.c
@@ -198,16 +198,6 @@ static void section_mark_present(struct
ms->section_mem_map |= SECTION_MARKED_PRESENT;
}
-static inline unsigned long next_present_section_nr(unsigned long section_nr)
-{
- do {
- section_nr++;
- if (present_section_nr(section_nr))
- return section_nr;
- } while ((section_nr <= __highest_present_section_nr));
-
- return -1;
-}
#define for_each_present_section_nr(start, section_nr) \
for (section_nr = next_present_section_nr(start-1); \
((section_nr != -1) && \
_
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: [patch 06/67] mm: factor out next_present_section_nr()
2020-02-04 1:34 ` [patch 06/67] mm: factor out next_present_section_nr() Andrew Morton
@ 2020-02-04 3:04 ` Linus Torvalds
2020-02-04 4:29 ` Andrew Morton
2020-02-04 8:22 ` David Hildenbrand
0 siblings, 2 replies; 95+ messages in thread
From: Linus Torvalds @ 2020-02-04 3:04 UTC (permalink / raw)
To: Andrew Morton
Cc: Baoquan He, Dan Williams, David Hildenbrand, Kirill A . Shutemov,
Kirill A . Shutemov, Linux-MM, Mel Gorman, Michal Hocko,
Michal Hocko, mm-commits, osalvador, Pavel Tatashin,
Vlastimil Babka, zhi.jin
More signs of your - or somebody elses - email scripts being broken:
On Tue, Feb 4, 2020 at 1:34 AM Andrew Morton <akpm@linux-foundation.org> wrote:
>
> From: David Hildenbrand <david@redhat.com>
> Subject: mm: factor out next_present_section_nr()
>
> Let's move it to the header and use the shorter variant from
> mm/page_alloc.c (the original one will also check
> "__highest_present_section_nr + 1", which is not necessary). While at it,
> make the section_nr in next_pfn() const.
>
> In next_pfn(), we now return section_nr_to_pfn(-1) instead of -1 once we
> exceed __highest_present_section_nr, which doesn't make a difference i= n
> the caller as it is big enough (>=3D all sane end_pfn).
Here, look at that "i= n". It looks like it was a MIME line-break (so
"in" was MIME-encoded and turned into "i=\nn") followed by you or
David re-flowing the text without MIME-decoding it.
And note the ">=3D" thing. It should be just ">=" but again there is
left-over crud from using MIME-encoded data without decoding it.
I am noticing that this has apparently happened before too. And maybe
it's not you. Maybe it's David Hildenbrand that has sent you already
corrupted data.
Doing a
git log --grep="=3D"
shows that this mistake has been done by others before. But it's not
_that_ common. I find 25 occurrences of that "=3D" thing in the logs
over the whole history of the kernel.
The "=\n" thing is much harder to grep for quite that trivially, or
the other "random utf8 encoded as MIME and never decoded properly"
stuff.
But the fact that I found at least _two_ of these cases in just this
series, and it had that broken coverletter too, makes me go "Hmm".
I tried to look for other cases, but those two emails (both from David
Hildenbrand, soo...) were the only ones I found in this series of 67.
I can fix them up, of course, but I really hate how somebody has some
workflow that generates this corruption.
MIME corruption in the patches themselves tends to be much more
obvious ("it doesn't apply" or "it no longer builds"). But in the
commit message it's not always clear. So please be *careful*.
I'm jetlagged in Cambridge UK and was going to apply this series since
I was awake anyway, but now I'm not sure I should do that.
At a minimum I want to know what the base commit was supposed to be..
Linus
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: [patch 06/67] mm: factor out next_present_section_nr()
2020-02-04 3:04 ` Linus Torvalds
@ 2020-02-04 4:29 ` Andrew Morton
2020-02-04 8:22 ` David Hildenbrand
1 sibling, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 4:29 UTC (permalink / raw)
To: Linus Torvalds
Cc: Baoquan He, Dan Williams, David Hildenbrand, Kirill A . Shutemov,
Kirill A . Shutemov, Linux-MM, Mel Gorman, Michal Hocko,
Michal Hocko, mm-commits, osalvador, Pavel Tatashin,
Vlastimil Babka, zhi.jin
On Tue, 4 Feb 2020 03:04:40 +0000 Linus Torvalds <torvalds@linux-foundation.org> wrote:
> On Tue, Feb 4, 2020 at 1:34 AM Andrew Morton <akpm@linux-foundation.org> wrote:
> >
> > From: David Hildenbrand <david@redhat.com>
> > Subject: mm: factor out next_present_section_nr()
> >
> > Let's move it to the header and use the shorter variant from
> > mm/page_alloc.c (the original one will also check
> > "__highest_present_section_nr + 1", which is not necessary). While at it,
> > make the section_nr in next_pfn() const.
> >
> > In next_pfn(), we now return section_nr_to_pfn(-1) instead of -1 once we
> > exceed __highest_present_section_nr, which doesn't make a difference i= n
> > the caller as it is big enough (>=3D all sane end_pfn).
>
> Here, look at that "i= n". It looks like it was a MIME line-break (so
> "in" was MIME-encoded and turned into "i=\nn") followed by you or
> David re-flowing the text without MIME-decoding it.
Yes, my MUA is not good about converting all input. I have tools to fix
up the patches post-facto but changelogs have been a challenge.
I have updated my nightly check-patches-for-crap-and-email-it-to-andrew
script to check for this.
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: [patch 06/67] mm: factor out next_present_section_nr()
2020-02-04 3:04 ` Linus Torvalds
2020-02-04 4:29 ` Andrew Morton
@ 2020-02-04 8:22 ` David Hildenbrand
1 sibling, 0 replies; 95+ messages in thread
From: David Hildenbrand @ 2020-02-04 8:22 UTC (permalink / raw)
To: Linus Torvalds, Andrew Morton
Cc: Baoquan He, Dan Williams, Kirill A . Shutemov,
Kirill A . Shutemov, Linux-MM, Mel Gorman, Michal Hocko,
Michal Hocko, mm-commits, osalvador, Pavel Tatashin,
Vlastimil Babka, zhi.jin
On 04.02.20 04:04, Linus Torvalds wrote:
> More signs of your - or somebody elses - email scripts being broken:
>
> On Tue, Feb 4, 2020 at 1:34 AM Andrew Morton <akpm@linux-foundation.org> wrote:
>>
>> From: David Hildenbrand <david@redhat.com>
>> Subject: mm: factor out next_present_section_nr()
>>
>> Let's move it to the header and use the shorter variant from
>> mm/page_alloc.c (the original one will also check
>> "__highest_present_section_nr + 1", which is not necessary). While at it,
>> make the section_nr in next_pfn() const.
>>
>> In next_pfn(), we now return section_nr_to_pfn(-1) instead of -1 once we
>> exceed __highest_present_section_nr, which doesn't make a difference i= n
>> the caller as it is big enough (>=3D all sane end_pfn).
>
> Here, look at that "i= n". It looks like it was a MIME line-break (so
> "in" was MIME-encoded and turned into "i=\nn") followed by you or
> David re-flowing the text without MIME-decoding it.
>
> And note the ">=3D" thing. It should be just ">=" but again there is
> left-over crud from using MIME-encoded data without decoding it.
>
> I am noticing that this has apparently happened before too. And maybe
> it's not you. Maybe it's David Hildenbrand that has sent you already
> corrupted data.
>
> Doing a
>
> git log --grep="=3D"
>
> shows that this mistake has been done by others before. But it's not
> _that_ common. I find 25 occurrences of that "=3D" thing in the logs
> over the whole history of the kernel.
>
Easter eggs :)
> The "=\n" thing is much harder to grep for quite that trivially, or
> the other "random utf8 encoded as MIME and never decoded properly"
> stuff.
>
> But the fact that I found at least _two_ of these cases in just this
> series, and it had that broken coverletter too, makes me go "Hmm".
>
> I tried to look for other cases, but those two emails (both from David
> Hildenbrand, soo...) were the only ones I found in this series of 67.
>
> I can fix them up, of course, but I really hate how somebody has some
> workflow that generates this corruption.
I'm a simple man - I use vim+git with barely any custom scripts (well,
only a cc-cmd script shared my Michal once). I've been sending patches
from the same machine for years without any such glitches.
The only thing I do manually is copying the cover letter from
Thunderbird + adapting it when resending a version. But as the patch
descriptions themselves are messed up, that doesn't explain the story.
I *suspect* this is the result of (one of many) temporary mail server
issues we had at Red Hat when switching providers (although a weird one
- but I remember there were weird ones).
--
Thanks,
David / dhildenb
^ permalink raw reply [flat|nested] 95+ messages in thread
* [patch 07/67] mm/memmap_init: update variable name in memmap_init_zone
2020-02-04 1:33 incoming Andrew Morton
` (5 preceding siblings ...)
2020-02-04 1:34 ` [patch 06/67] mm: factor out next_present_section_nr() Andrew Morton
@ 2020-02-04 1:34 ` Andrew Morton
2020-02-04 1:34 ` [patch 08/67] mm/memory_hotplug: poison memmap in remove_pfn_range_from_zone() Andrew Morton
` (62 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:34 UTC (permalink / raw)
To: akpm, aneesh.kumar, dan.j.williams, david, gregkh, linux-mm,
logang, mhocko, mm-commits, osalvador, pagupta, pasha.tatashin,
torvalds, willy
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Subject: mm/memmap_init: update variable name in memmap_init_zone
Patch series "mm/memory_hotplug: Shrink zones before removing memory", v6.
This series fixes the access of uninitialized memmaps when shrinking
zones/nodes and when removing memory. Also, it contains all fixes for
crashes that can be triggered when removing certain namespace using
memunmap_pages() - ZONE_DEVICE, reported by Aneesh.
We stop trying to shrink ZONE_DEVICE, as it's buggy, fixing it would be
more involved (we don't have SECTION_IS_ONLINE as an indicator), and
shrinking is only of limited use (set_zone_contiguous() cannot detect the
ZONE_DEVICE as contiguous).
We continue shrinking !ZONE_DEVICE zones, however, I reduced the amount of
code to a minimum. Shrinking is especially necessary to keep
zone->contiguous set where possible, especially, on memory unplug of DIMMs
at zone boundaries.
--------------------------------------------------------------------------
Zones are now properly shrunk when offlining memory blocks or when
onlining failed. This allows to properly shrink zones on memory unplug
even if the separate memory blocks of a DIMM were onlined to different
zones or re-onlined to a different zone after offlining.
Example:
:/# cat /proc/zoneinfo
Node 1, zone Movable
spanned 0
present 0
managed 0
:/# echo "online_movable" > /sys/devices/system/memory/memory41/state
:/# echo "online_movable" > /sys/devices/system/memory/memory43/state
:/# cat /proc/zoneinfo
Node 1, zone Movable
spanned 98304
present 65536
managed 65536
:/# echo 0 > /sys/devices/system/memory/memory43/online
:/# cat /proc/zoneinfo
Node 1, zone Movable
spanned 32768
present 32768
managed 32768
:/# echo 0 > /sys/devices/system/memory/memory41/online
:/# cat /proc/zoneinfo
Node 1, zone Movable
spanned 0
present 0
managed 0
This patch (of 6):
The third argument is actually number of pages. Change the variable name
from size to nr_pages to indicate this better.
No functional change in this patch.
Link: http://lkml.kernel.org/r/20191006085646.5768-3-david@redhat.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
mm/page_alloc.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/mm/page_alloc.c~mm-memmap_init-update-variable-name-in-memmap_init_zone
+++ a/mm/page_alloc.c
@@ -5946,10 +5946,10 @@ void __meminit memmap_init_zone(unsigned
#ifdef CONFIG_ZONE_DEVICE
void __ref memmap_init_zone_device(struct zone *zone,
unsigned long start_pfn,
- unsigned long size,
+ unsigned long nr_pages,
struct dev_pagemap *pgmap)
{
- unsigned long pfn, end_pfn = start_pfn + size;
+ unsigned long pfn, end_pfn = start_pfn + nr_pages;
struct pglist_data *pgdat = zone->zone_pgdat;
struct vmem_altmap *altmap = pgmap_altmap(pgmap);
unsigned long zone_idx = zone_idx(zone);
@@ -5966,7 +5966,7 @@ void __ref memmap_init_zone_device(struc
*/
if (altmap) {
start_pfn = altmap->base_pfn + vmem_altmap_offset(altmap);
- size = end_pfn - start_pfn;
+ nr_pages = end_pfn - start_pfn;
}
for (pfn = start_pfn; pfn < end_pfn; pfn++) {
@@ -6013,7 +6013,7 @@ void __ref memmap_init_zone_device(struc
}
pr_info("%s initialised %lu pages in %ums\n", __func__,
- size, jiffies_to_msecs(jiffies - start));
+ nr_pages, jiffies_to_msecs(jiffies - start));
}
#endif
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 08/67] mm/memory_hotplug: poison memmap in remove_pfn_range_from_zone()
2020-02-04 1:33 incoming Andrew Morton
` (6 preceding siblings ...)
2020-02-04 1:34 ` [patch 07/67] mm/memmap_init: update variable name in memmap_init_zone Andrew Morton
@ 2020-02-04 1:34 ` Andrew Morton
2020-02-04 1:34 ` [patch 09/67] mm/memory_hotplug: we always have a zone in find_(smallest|biggest)_section_pfn Andrew Morton
` (61 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:34 UTC (permalink / raw)
To: akpm, aneesh.kumar, dan.j.williams, david, gregkh, linux-mm,
logang, mhocko, mm-commits, osalvador, pagupta, pasha.tatashin,
torvalds, willy
From: David Hildenbrand <david@redhat.com>
Subject: mm/memory_hotplug: poison memmap in remove_pfn_range_from_zone()
Let's poison the pages similar to when adding new memory in
sparse_add_section(). Also call remove_pfn_range_from_zone() from
memunmap_pages(), so we can poison the memmap from there as well.
Link: http://lkml.kernel.org/r/20191006085646.5768-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
mm/memory_hotplug.c | 3 +++
mm/memremap.c | 2 ++
2 files changed, 5 insertions(+)
--- a/mm/memory_hotplug.c~mm-memory_hotplug-poison-memmap-in-remove_pfn_range_from_zone
+++ a/mm/memory_hotplug.c
@@ -490,6 +490,9 @@ void __ref remove_pfn_range_from_zone(st
struct pglist_data *pgdat = zone->zone_pgdat;
unsigned long flags;
+ /* Poison struct pages because they are now uninitialized again. */
+ page_init_poison(pfn_to_page(start_pfn), sizeof(struct page) * nr_pages);
+
#ifdef CONFIG_ZONE_DEVICE
/*
* Zone shrinking code cannot properly deal with ZONE_DEVICE. So
--- a/mm/memremap.c~mm-memory_hotplug-poison-memmap-in-remove_pfn_range_from_zone
+++ a/mm/memremap.c
@@ -120,6 +120,8 @@ void memunmap_pages(struct dev_pagemap *
nid = page_to_nid(first_page);
mem_hotplug_begin();
+ remove_pfn_range_from_zone(page_zone(first_page), PHYS_PFN(res->start),
+ PHYS_PFN(resource_size(res)));
if (pgmap->type == MEMORY_DEVICE_PRIVATE) {
__remove_pages(PHYS_PFN(res->start),
PHYS_PFN(resource_size(res)), NULL);
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 09/67] mm/memory_hotplug: we always have a zone in find_(smallest|biggest)_section_pfn
2020-02-04 1:33 incoming Andrew Morton
` (7 preceding siblings ...)
2020-02-04 1:34 ` [patch 08/67] mm/memory_hotplug: poison memmap in remove_pfn_range_from_zone() Andrew Morton
@ 2020-02-04 1:34 ` Andrew Morton
2020-02-04 1:34 ` [patch 10/67] mm/memory_hotplug: don't check for "all holes" in shrink_zone_span() Andrew Morton
` (60 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:34 UTC (permalink / raw)
To: akpm, aneesh.kumar, dan.j.williams, david, gregkh, linux-mm,
logang, mhocko, mm-commits, osalvador, pagupta, pasha.tatashin,
torvalds, willy
From: David Hildenbrand <david@redhat.com>
Subject: mm/memory_hotplug: we always have a zone in find_(smallest|biggest)_section_pfn
With shrink_pgdat_span() out of the way, we now always have a valid zone.
Link: http://lkml.kernel.org/r/20191006085646.5768-8-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
mm/memory_hotplug.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/mm/memory_hotplug.c~mm-memory_hotplug-we-always-have-a-zone-in-find_smallestbiggest_section_pfn
+++ a/mm/memory_hotplug.c
@@ -355,7 +355,7 @@ static unsigned long find_smallest_secti
if (unlikely(pfn_to_nid(start_pfn) != nid))
continue;
- if (zone && zone != page_zone(pfn_to_page(start_pfn)))
+ if (zone != page_zone(pfn_to_page(start_pfn)))
continue;
return start_pfn;
@@ -380,7 +380,7 @@ static unsigned long find_biggest_sectio
if (unlikely(pfn_to_nid(pfn) != nid))
continue;
- if (zone && zone != page_zone(pfn_to_page(pfn)))
+ if (zone != page_zone(pfn_to_page(pfn)))
continue;
return pfn;
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 10/67] mm/memory_hotplug: don't check for "all holes" in shrink_zone_span()
2020-02-04 1:33 incoming Andrew Morton
` (8 preceding siblings ...)
2020-02-04 1:34 ` [patch 09/67] mm/memory_hotplug: we always have a zone in find_(smallest|biggest)_section_pfn Andrew Morton
@ 2020-02-04 1:34 ` Andrew Morton
2020-02-04 1:34 ` [patch 11/67] mm/memory_hotplug: drop local variables " Andrew Morton
` (59 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:34 UTC (permalink / raw)
To: akpm, aneesh.kumar, dan.j.williams, david, gregkh, linux-mm,
logang, mhocko, mm-commits, osalvador, pagupta, pasha.tatashin,
torvalds, willy
From: David Hildenbrand <david@redhat.com>
Subject: mm/memory_hotplug: don't check for "all holes" in shrink_zone_span()
If we have holes, the holes will automatically get detected and removed
once we remove the next bigger/smaller section. The extra checks can go.
Link: http://lkml.kernel.org/r/20191006085646.5768-9-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
mm/memory_hotplug.c | 34 +++++++---------------------------
1 file changed, 7 insertions(+), 27 deletions(-)
--- a/mm/memory_hotplug.c~mm-memory_hotplug-dont-check-for-all-holes-in-shrink_zone_span
+++ a/mm/memory_hotplug.c
@@ -411,6 +411,9 @@ static void shrink_zone_span(struct zone
if (pfn) {
zone->zone_start_pfn = pfn;
zone->spanned_pages = zone_end_pfn - pfn;
+ } else {
+ zone->zone_start_pfn = 0;
+ zone->spanned_pages = 0;
}
} else if (zone_end_pfn == end_pfn) {
/*
@@ -423,34 +426,11 @@ static void shrink_zone_span(struct zone
start_pfn);
if (pfn)
zone->spanned_pages = pfn - zone_start_pfn + 1;
+ else {
+ zone->zone_start_pfn = 0;
+ zone->spanned_pages = 0;
+ }
}
-
- /*
- * The section is not biggest or smallest mem_section in the zone, it
- * only creates a hole in the zone. So in this case, we need not
- * change the zone. But perhaps, the zone has only hole data. Thus
- * it check the zone has only hole or not.
- */
- pfn = zone_start_pfn;
- for (; pfn < zone_end_pfn; pfn += PAGES_PER_SUBSECTION) {
- if (unlikely(!pfn_to_online_page(pfn)))
- continue;
-
- if (page_zone(pfn_to_page(pfn)) != zone)
- continue;
-
- /* Skip range to be removed */
- if (pfn >= start_pfn && pfn < end_pfn)
- continue;
-
- /* If we find valid section, we have nothing to do */
- zone_span_writeunlock(zone);
- return;
- }
-
- /* The zone has no valid section */
- zone->zone_start_pfn = 0;
- zone->spanned_pages = 0;
zone_span_writeunlock(zone);
}
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 11/67] mm/memory_hotplug: drop local variables in shrink_zone_span()
2020-02-04 1:33 incoming Andrew Morton
` (9 preceding siblings ...)
2020-02-04 1:34 ` [patch 10/67] mm/memory_hotplug: don't check for "all holes" in shrink_zone_span() Andrew Morton
@ 2020-02-04 1:34 ` Andrew Morton
2020-02-04 1:34 ` [patch 12/67] mm/memory_hotplug: cleanup __remove_pages() Andrew Morton
` (58 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:34 UTC (permalink / raw)
To: akpm, aneesh.kumar, dan.j.williams, david, gregkh, linux-mm,
logang, mhocko, mm-commits, osalvador, pagupta, pasha.tatashin,
torvalds, willy
From: David Hildenbrand <david@redhat.com>
Subject: mm/memory_hotplug: drop local variables in shrink_zone_span()
Get rid of the unnecessary local variables.
Link: http://lkml.kernel.org/r/20191006085646.5768-10-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pagupta@redhat.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
mm/memory_hotplug.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
--- a/mm/memory_hotplug.c~mm-memory_hotplug-drop-local-variables-in-shrink_zone_span
+++ a/mm/memory_hotplug.c
@@ -392,14 +392,11 @@ static unsigned long find_biggest_sectio
static void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
unsigned long end_pfn)
{
- unsigned long zone_start_pfn = zone->zone_start_pfn;
- unsigned long z = zone_end_pfn(zone); /* zone_end_pfn namespace clash */
- unsigned long zone_end_pfn = z;
unsigned long pfn;
int nid = zone_to_nid(zone);
zone_span_writelock(zone);
- if (zone_start_pfn == start_pfn) {
+ if (zone->zone_start_pfn == start_pfn) {
/*
* If the section is smallest section in the zone, it need
* shrink zone->zone_start_pfn and zone->zone_spanned_pages.
@@ -407,25 +404,25 @@ static void shrink_zone_span(struct zone
* for shrinking zone.
*/
pfn = find_smallest_section_pfn(nid, zone, end_pfn,
- zone_end_pfn);
+ zone_end_pfn(zone));
if (pfn) {
+ zone->spanned_pages = zone_end_pfn(zone) - pfn;
zone->zone_start_pfn = pfn;
- zone->spanned_pages = zone_end_pfn - pfn;
} else {
zone->zone_start_pfn = 0;
zone->spanned_pages = 0;
}
- } else if (zone_end_pfn == end_pfn) {
+ } else if (zone_end_pfn(zone) == end_pfn) {
/*
* If the section is biggest section in the zone, it need
* shrink zone->spanned_pages.
* In this case, we find second biggest valid mem_section for
* shrinking zone.
*/
- pfn = find_biggest_section_pfn(nid, zone, zone_start_pfn,
+ pfn = find_biggest_section_pfn(nid, zone, zone->zone_start_pfn,
start_pfn);
if (pfn)
- zone->spanned_pages = pfn - zone_start_pfn + 1;
+ zone->spanned_pages = pfn - zone->zone_start_pfn + 1;
else {
zone->zone_start_pfn = 0;
zone->spanned_pages = 0;
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 12/67] mm/memory_hotplug: cleanup __remove_pages()
2020-02-04 1:33 incoming Andrew Morton
` (10 preceding siblings ...)
2020-02-04 1:34 ` [patch 11/67] mm/memory_hotplug: drop local variables " Andrew Morton
@ 2020-02-04 1:34 ` Andrew Morton
2020-02-04 1:34 ` [patch 13/67] mm/memory_hotplug: drop valid_start/valid_end from test_pages_in_a_zone() Andrew Morton
` (57 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:34 UTC (permalink / raw)
To: akpm, aneesh.kumar, dan.j.williams, david, gregkh, linux-mm,
logang, mhocko, mm-commits, osalvador, pagupta, pasha.tatashin,
torvalds, willy
From: David Hildenbrand <david@redhat.com>
Subject: mm/memory_hotplug: cleanup __remove_pages()
Let's drop the basically unused section stuff and simplify.
Also, let's use a shorter variant to calculate the number of pages to
the next section boundary.
Link: http://lkml.kernel.org/r/20191006085646.5768-11-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
mm/memory_hotplug.c | 17 ++++++-----------
1 file changed, 6 insertions(+), 11 deletions(-)
--- a/mm/memory_hotplug.c~mm-memory_hotplug-cleanup-__remove_pages
+++ a/mm/memory_hotplug.c
@@ -516,25 +516,20 @@ static void __remove_section(unsigned lo
void __remove_pages(unsigned long pfn, unsigned long nr_pages,
struct vmem_altmap *altmap)
{
+ const unsigned long end_pfn = pfn + nr_pages;
+ unsigned long cur_nr_pages;
unsigned long map_offset = 0;
- unsigned long nr, start_sec, end_sec;
map_offset = vmem_altmap_offset(altmap);
if (check_pfn_span(pfn, nr_pages, "remove"))
return;
- start_sec = pfn_to_section_nr(pfn);
- end_sec = pfn_to_section_nr(pfn + nr_pages - 1);
- for (nr = start_sec; nr <= end_sec; nr++) {
- unsigned long pfns;
-
+ for (; pfn < end_pfn; pfn += cur_nr_pages) {
cond_resched();
- pfns = min(nr_pages, PAGES_PER_SECTION
- - (pfn & ~PAGE_SECTION_MASK));
- __remove_section(pfn, pfns, map_offset, altmap);
- pfn += pfns;
- nr_pages -= pfns;
+ /* Select all remaining pages up to the next section boundary */
+ cur_nr_pages = min(end_pfn - pfn, -(pfn | PAGE_SECTION_MASK));
+ __remove_section(pfn, cur_nr_pages, map_offset, altmap);
map_offset = 0;
}
}
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 13/67] mm/memory_hotplug: drop valid_start/valid_end from test_pages_in_a_zone()
2020-02-04 1:33 incoming Andrew Morton
` (11 preceding siblings ...)
2020-02-04 1:34 ` [patch 12/67] mm/memory_hotplug: cleanup __remove_pages() Andrew Morton
@ 2020-02-04 1:34 ` Andrew Morton
2020-02-04 1:34 ` [patch 14/67] smp_mb__{before,after}_atomic(): update Documentation Andrew Morton
` (56 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:34 UTC (permalink / raw)
To: akpm, david, gregkh, linux-mm, mhocko, mm-commits, osalvador,
rafael, torvalds
From: David Hildenbrand <david@redhat.com>
Subject: mm/memory_hotplug: drop valid_start/valid_end from test_pages_in_a_zone()
The callers are only interested in the actual zone, they don't care about
boundaries. Return the zone instead to simplify.
Link: http://lkml.kernel.org/r/20200110183308.11849-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/base/memory.c | 9 ++++-----
include/linux/memory_hotplug.h | 4 ++--
mm/memory_hotplug.c | 31 +++++++++----------------------
3 files changed, 15 insertions(+), 29 deletions(-)
--- a/drivers/base/memory.c~mm-memory_hotplug-drop-valid_start-valid_end-from-test_pages_in_a_zone
+++ a/drivers/base/memory.c
@@ -376,7 +376,6 @@ static ssize_t valid_zones_show(struct d
struct memory_block *mem = to_memory_block(dev);
unsigned long start_pfn = section_nr_to_pfn(mem->start_section_nr);
unsigned long nr_pages = PAGES_PER_SECTION * sections_per_block;
- unsigned long valid_start_pfn, valid_end_pfn;
struct zone *default_zone;
int nid;
@@ -389,11 +388,11 @@ static ssize_t valid_zones_show(struct d
* The block contains more than one zone can not be offlined.
* This can happen e.g. for ZONE_DMA and ZONE_DMA32
*/
- if (!test_pages_in_a_zone(start_pfn, start_pfn + nr_pages,
- &valid_start_pfn, &valid_end_pfn))
+ default_zone = test_pages_in_a_zone(start_pfn,
+ start_pfn + nr_pages);
+ if (!default_zone)
return sprintf(buf, "none\n");
- start_pfn = valid_start_pfn;
- strcat(buf, page_zone(pfn_to_page(start_pfn))->name);
+ strcat(buf, default_zone->name);
goto out;
}
--- a/include/linux/memory_hotplug.h~mm-memory_hotplug-drop-valid_start-valid_end-from-test_pages_in_a_zone
+++ a/include/linux/memory_hotplug.h
@@ -96,8 +96,8 @@ extern int add_one_highpage(struct page
/* VM interface that may be used by firmware interface */
extern int online_pages(unsigned long pfn, unsigned long nr_pages,
int online_type, int nid);
-extern int test_pages_in_a_zone(unsigned long start_pfn, unsigned long end_pfn,
- unsigned long *valid_start, unsigned long *valid_end);
+extern struct zone *test_pages_in_a_zone(unsigned long start_pfn,
+ unsigned long end_pfn);
extern unsigned long __offline_isolated_pages(unsigned long start_pfn,
unsigned long end_pfn);
--- a/mm/memory_hotplug.c~mm-memory_hotplug-drop-valid_start-valid_end-from-test_pages_in_a_zone
+++ a/mm/memory_hotplug.c
@@ -1172,14 +1172,13 @@ bool is_mem_section_removable(unsigned l
}
/*
- * Confirm all pages in a range [start, end) belong to the same zone.
- * When true, return its valid [start, end).
+ * Confirm all pages in a range [start, end) belong to the same zone (skipping
+ * memory holes). When true, return the zone.
*/
-int test_pages_in_a_zone(unsigned long start_pfn, unsigned long end_pfn,
- unsigned long *valid_start, unsigned long *valid_end)
+struct zone *test_pages_in_a_zone(unsigned long start_pfn,
+ unsigned long end_pfn)
{
unsigned long pfn, sec_end_pfn;
- unsigned long start, end;
struct zone *zone = NULL;
struct page *page;
int i;
@@ -1200,24 +1199,15 @@ int test_pages_in_a_zone(unsigned long s
continue;
/* Check if we got outside of the zone */
if (zone && !zone_spans_pfn(zone, pfn + i))
- return 0;
+ return NULL;
page = pfn_to_page(pfn + i);
if (zone && page_zone(page) != zone)
- return 0;
- if (!zone)
- start = pfn + i;
+ return NULL;
zone = page_zone(page);
- end = pfn + MAX_ORDER_NR_PAGES;
}
}
- if (zone) {
- *valid_start = start;
- *valid_end = min(end, end_pfn);
- return 1;
- } else {
- return 0;
- }
+ return zone;
}
/*
@@ -1462,7 +1452,6 @@ static int __ref __offline_pages(unsigne
unsigned long offlined_pages = 0;
int ret, node, nr_isolate_pageblock;
unsigned long flags;
- unsigned long valid_start, valid_end;
struct zone *zone;
struct memory_notify arg;
char *reason;
@@ -1487,14 +1476,12 @@ static int __ref __offline_pages(unsigne
/* This makes hotplug much easier...and readable.
we assume this for now. .*/
- if (!test_pages_in_a_zone(start_pfn, end_pfn, &valid_start,
- &valid_end)) {
+ zone = test_pages_in_a_zone(start_pfn, end_pfn);
+ if (!zone) {
ret = -EINVAL;
reason = "multizone range";
goto failed_removal;
}
-
- zone = page_zone(pfn_to_page(valid_start));
node = zone_to_nid(zone);
/* set above range as isolated */
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 14/67] smp_mb__{before,after}_atomic(): update Documentation
2020-02-04 1:33 incoming Andrew Morton
` (12 preceding siblings ...)
2020-02-04 1:34 ` [patch 13/67] mm/memory_hotplug: drop valid_start/valid_end from test_pages_in_a_zone() Andrew Morton
@ 2020-02-04 1:34 ` Andrew Morton
2020-02-04 1:34 ` [patch 15/67] ipc/mqueue.c: remove duplicated code Andrew Morton
` (55 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:34 UTC (permalink / raw)
To: 1vier1, akpm, dave, linux-mm, longman, manfred, mm-commits,
peterz, torvalds, will.deacon
From: Manfred Spraul <manfred@colorfullife.com>
Subject: smp_mb__{before,after}_atomic(): update Documentation
When adding the _{acquire|release|relaxed}() variants of some atomic
operations, it was forgotten to update Documentation/memory_barrier.txt:
smp_mb__{before,after}_atomic() is now intended for all RMW operations
that do not imply a memory barrier.
1)
smp_mb__before_atomic();
atomic_add();
2)
smp_mb__before_atomic();
atomic_xchg_relaxed();
3)
smp_mb__before_atomic();
atomic_fetch_add_relaxed();
Invalid would be:
smp_mb__before_atomic();
atomic_set();
In addition, the patch splits the long sentence into multiple shorter
sentences.
Link: http://lkml.kernel.org/r/20191020123305.14715-2-manfred@colorfullife.com
Fixes: 654672d4ba1a ("locking/atomics: Add _{acquire|release|relaxed}() variants of some atomic operations")
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <1vier1@web.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
Documentation/memory-barriers.txt | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
--- a/Documentation/memory-barriers.txt~smp_mb__beforeafter_atomic-update-documentation
+++ a/Documentation/memory-barriers.txt
@@ -1868,12 +1868,16 @@ There are some more advanced barrier fun
(*) smp_mb__before_atomic();
(*) smp_mb__after_atomic();
- These are for use with atomic (such as add, subtract, increment and
- decrement) functions that don't return a value, especially when used for
- reference counting. These functions do not imply memory barriers.
+ These are for use with atomic RMW functions that do not imply memory
+ barriers, but where the code needs a memory barrier. Examples for atomic
+ RMW functions that do not imply are memory barrier are e.g. add,
+ subtract, (failed) conditional operations, _relaxed functions,
+ but not atomic_read or atomic_set. A common example where a memory
+ barrier may be required is when atomic ops are used for reference
+ counting.
- These are also used for atomic bitop functions that do not return a
- value (such as set_bit and clear_bit).
+ These are also used for atomic RMW bitop functions that do not imply a
+ memory barrier (such as set_bit and clear_bit).
As an example, consider a piece of code that marks an object as being dead
and then decrements the object's reference count:
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 15/67] ipc/mqueue.c: remove duplicated code
2020-02-04 1:33 incoming Andrew Morton
` (13 preceding siblings ...)
2020-02-04 1:34 ` [patch 14/67] smp_mb__{before,after}_atomic(): update Documentation Andrew Morton
@ 2020-02-04 1:34 ` Andrew Morton
2020-02-04 1:34 ` [patch 16/67] ipc/mqueue.c: update/document memory barriers Andrew Morton
` (54 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:34 UTC (permalink / raw)
To: 1vier1, akpm, dave, linux-mm, longman, manfred, mm-commits,
peterz, torvalds, will.deacon
From: Davidlohr Bueso <dave@stgolabs.net>
Subject: ipc/mqueue.c: remove duplicated code
pipelined_send() and pipelined_receive() are identical, so merge them.
[manfred@colorfullife.com: add changelog]
Link: http://lkml.kernel.org/r/20191020123305.14715-3-manfred@colorfullife.com
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: <1vier1@web.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
ipc/mqueue.c | 31 ++++++++++++++++++-------------
1 file changed, 18 insertions(+), 13 deletions(-)
--- a/ipc/mqueue.c~ipc-mqueuec-remove-duplicated-code
+++ a/ipc/mqueue.c
@@ -918,17 +918,12 @@ out_name:
* The same algorithm is used for senders.
*/
-/* pipelined_send() - send a message directly to the task waiting in
- * sys_mq_timedreceive() (without inserting message into a queue).
- */
-static inline void pipelined_send(struct wake_q_head *wake_q,
+static inline void __pipelined_op(struct wake_q_head *wake_q,
struct mqueue_inode_info *info,
- struct msg_msg *message,
- struct ext_wait_queue *receiver)
+ struct ext_wait_queue *this)
{
- receiver->msg = message;
- list_del(&receiver->list);
- wake_q_add(wake_q, receiver->task);
+ list_del(&this->list);
+ wake_q_add(wake_q, this->task);
/*
* Rely on the implicit cmpxchg barrier from wake_q_add such
* that we can ensure that updating receiver->state is the last
@@ -937,7 +932,19 @@ static inline void pipelined_send(struct
* yet, at that point we can later have a use-after-free
* condition and bogus wakeup.
*/
- receiver->state = STATE_READY;
+ this->state = STATE_READY;
+}
+
+/* pipelined_send() - send a message directly to the task waiting in
+ * sys_mq_timedreceive() (without inserting message into a queue).
+ */
+static inline void pipelined_send(struct wake_q_head *wake_q,
+ struct mqueue_inode_info *info,
+ struct msg_msg *message,
+ struct ext_wait_queue *receiver)
+{
+ receiver->msg = message;
+ __pipelined_op(wake_q, info, receiver);
}
/* pipelined_receive() - if there is task waiting in sys_mq_timedsend()
@@ -955,9 +962,7 @@ static inline void pipelined_receive(str
if (msg_insert(sender->msg, info))
return;
- list_del(&sender->list);
- wake_q_add(wake_q, sender->task);
- sender->state = STATE_READY;
+ __pipelined_op(wake_q, info, sender);
}
static int do_mq_timedsend(mqd_t mqdes, const char __user *u_msg_ptr,
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 16/67] ipc/mqueue.c: update/document memory barriers
2020-02-04 1:33 incoming Andrew Morton
` (14 preceding siblings ...)
2020-02-04 1:34 ` [patch 15/67] ipc/mqueue.c: remove duplicated code Andrew Morton
@ 2020-02-04 1:34 ` Andrew Morton
2020-02-04 1:34 ` [patch 17/67] ipc/msg.c: update and document " Andrew Morton
` (53 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:34 UTC (permalink / raw)
To: 1vier1, akpm, dbueso, linux-mm, longman, manfred, mm-commits,
peterz, torvalds, will.deacon
From: Manfred Spraul <manfred@colorfullife.com>
Subject: ipc/mqueue.c: update/document memory barriers
Update and document memory barriers for mqueue.c:
- ewp->state is read without any locks, thus READ_ONCE is required.
- add smp_aquire__after_ctrl_dep() after the READ_ONCE, we need
acquire semantics if the value is STATE_READY.
- use wake_q_add_safe()
- document why __set_current_state() may be used:
Reading task->state cannot happen before the wake_q_add() call,
which happens while holding info->lock. Thus the spin_unlock()
is the RELEASE, and the spin_lock() is the ACQUIRE.
For completeness: there is also a 3 CPU scenario, if the to be woken
up task is already on another wake_q.
Then:
- CPU1: spin_unlock() of the task that goes to sleep is the RELEASE
- CPU2: the spin_lock() of the waker is the ACQUIRE
- CPU2: smp_mb__before_atomic inside wake_q_add() is the RELEASE
- CPU3: smp_mb__after_spinlock() inside try_to_wake_up() is the ACQUIRE
Link: http://lkml.kernel.org/r/20191020123305.14715-4-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Waiman Long <longman@redhat.com>
Cc: <1vier1@web.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
ipc/mqueue.c | 92 +++++++++++++++++++++++++++++++++++++++++--------
1 file changed, 78 insertions(+), 14 deletions(-)
--- a/ipc/mqueue.c~ipc-mqueuec-update-document-memory-barriers
+++ a/ipc/mqueue.c
@@ -63,6 +63,66 @@ struct posix_msg_tree_node {
int priority;
};
+/*
+ * Locking:
+ *
+ * Accesses to a message queue are synchronized by acquiring info->lock.
+ *
+ * There are two notable exceptions:
+ * - The actual wakeup of a sleeping task is performed using the wake_q
+ * framework. info->lock is already released when wake_up_q is called.
+ * - The exit codepaths after sleeping check ext_wait_queue->state without
+ * any locks. If it is STATE_READY, then the syscall is completed without
+ * acquiring info->lock.
+ *
+ * MQ_BARRIER:
+ * To achieve proper release/acquire memory barrier pairing, the state is set to
+ * STATE_READY with smp_store_release(), and it is read with READ_ONCE followed
+ * by smp_acquire__after_ctrl_dep(). In addition, wake_q_add_safe() is used.
+ *
+ * This prevents the following races:
+ *
+ * 1) With the simple wake_q_add(), the task could be gone already before
+ * the increase of the reference happens
+ * Thread A
+ * Thread B
+ * WRITE_ONCE(wait.state, STATE_NONE);
+ * schedule_hrtimeout()
+ * wake_q_add(A)
+ * if (cmpxchg()) // success
+ * ->state = STATE_READY (reordered)
+ * <timeout returns>
+ * if (wait.state == STATE_READY) return;
+ * sysret to user space
+ * sys_exit()
+ * get_task_struct() // UaF
+ *
+ * Solution: Use wake_q_add_safe() and perform the get_task_struct() before
+ * the smp_store_release() that does ->state = STATE_READY.
+ *
+ * 2) Without proper _release/_acquire barriers, the woken up task
+ * could read stale data
+ *
+ * Thread A
+ * Thread B
+ * do_mq_timedreceive
+ * WRITE_ONCE(wait.state, STATE_NONE);
+ * schedule_hrtimeout()
+ * state = STATE_READY;
+ * <timeout returns>
+ * if (wait.state == STATE_READY) return;
+ * msg_ptr = wait.msg; // Access to stale data!
+ * receiver->msg = message; (reordered)
+ *
+ * Solution: use _release and _acquire barriers.
+ *
+ * 3) There is intentionally no barrier when setting current->state
+ * to TASK_INTERRUPTIBLE: spin_unlock(&info->lock) provides the
+ * release memory barrier, and the wakeup is triggered when holding
+ * info->lock, i.e. spin_lock(&info->lock) provided a pairing
+ * acquire memory barrier.
+ */
+
struct ext_wait_queue { /* queue of sleeping tasks */
struct task_struct *task;
struct list_head list;
@@ -646,18 +706,23 @@ static int wq_sleep(struct mqueue_inode_
wq_add(info, sr, ewp);
for (;;) {
+ /* memory barrier not required, we hold info->lock */
__set_current_state(TASK_INTERRUPTIBLE);
spin_unlock(&info->lock);
time = schedule_hrtimeout_range_clock(timeout, 0,
HRTIMER_MODE_ABS, CLOCK_REALTIME);
- if (ewp->state == STATE_READY) {
+ if (READ_ONCE(ewp->state) == STATE_READY) {
+ /* see MQ_BARRIER for purpose/pairing */
+ smp_acquire__after_ctrl_dep();
retval = 0;
goto out;
}
spin_lock(&info->lock);
- if (ewp->state == STATE_READY) {
+
+ /* we hold info->lock, so no memory barrier required */
+ if (READ_ONCE(ewp->state) == STATE_READY) {
retval = 0;
goto out_unlock;
}
@@ -923,16 +988,11 @@ static inline void __pipelined_op(struct
struct ext_wait_queue *this)
{
list_del(&this->list);
- wake_q_add(wake_q, this->task);
- /*
- * Rely on the implicit cmpxchg barrier from wake_q_add such
- * that we can ensure that updating receiver->state is the last
- * write operation: As once set, the receiver can continue,
- * and if we don't have the reference count from the wake_q,
- * yet, at that point we can later have a use-after-free
- * condition and bogus wakeup.
- */
- this->state = STATE_READY;
+ get_task_struct(this->task);
+
+ /* see MQ_BARRIER for purpose/pairing */
+ smp_store_release(&this->state, STATE_READY);
+ wake_q_add_safe(wake_q, this->task);
}
/* pipelined_send() - send a message directly to the task waiting in
@@ -1049,7 +1109,9 @@ static int do_mq_timedsend(mqd_t mqdes,
} else {
wait.task = current;
wait.msg = (void *) msg_ptr;
- wait.state = STATE_NONE;
+
+ /* memory barrier not required, we hold info->lock */
+ WRITE_ONCE(wait.state, STATE_NONE);
ret = wq_sleep(info, SEND, timeout, &wait);
/*
* wq_sleep must be called with info->lock held, and
@@ -1152,7 +1214,9 @@ static int do_mq_timedreceive(mqd_t mqde
ret = -EAGAIN;
} else {
wait.task = current;
- wait.state = STATE_NONE;
+
+ /* memory barrier not required, we hold info->lock */
+ WRITE_ONCE(wait.state, STATE_NONE);
ret = wq_sleep(info, RECV, timeout, &wait);
msg_ptr = wait.msg;
}
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 17/67] ipc/msg.c: update and document memory barriers
2020-02-04 1:33 incoming Andrew Morton
` (15 preceding siblings ...)
2020-02-04 1:34 ` [patch 16/67] ipc/mqueue.c: update/document memory barriers Andrew Morton
@ 2020-02-04 1:34 ` Andrew Morton
2020-02-04 1:34 ` [patch 18/67] ipc/sem.c: document and update " Andrew Morton
` (52 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:34 UTC (permalink / raw)
To: 1vier1, akpm, dave, linux-mm, longman, manfred, mm-commits,
peterz, torvalds, will.deacon
From: Manfred Spraul <manfred@colorfullife.com>
Subject: ipc/msg.c: update and document memory barriers
Transfer findings from ipc/mqueue.c:
- A control barrier was missing for the lockless receive case So in
theory, not yet initialized data may have been copied to user space -
obviously only for architectures where control barriers are not NOP.
- use smp_store_release(). In theory, the refount may have been
decreased to 0 already when wake_q_add() tries to get a reference.
Link: http://lkml.kernel.org/r/20191020123305.14715-5-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <1vier1@web.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
ipc/msg.c | 43 ++++++++++++++++++++++++++++++++++++-------
1 file changed, 36 insertions(+), 7 deletions(-)
--- a/ipc/msg.c~ipc-msgc-update-and-document-memory-barriers
+++ a/ipc/msg.c
@@ -61,6 +61,16 @@ struct msg_queue {
struct list_head q_senders;
} __randomize_layout;
+/*
+ * MSG_BARRIER Locking:
+ *
+ * Similar to the optimization used in ipc/mqueue.c, one syscall return path
+ * does not acquire any locks when it sees that a message exists in
+ * msg_receiver.r_msg. Therefore r_msg is set using smp_store_release()
+ * and accessed using READ_ONCE()+smp_acquire__after_ctrl_dep(). In addition,
+ * wake_q_add_safe() is used. See ipc/mqueue.c for more details
+ */
+
/* one msg_receiver structure for each sleeping receiver */
struct msg_receiver {
struct list_head r_list;
@@ -184,6 +194,10 @@ static inline void ss_add(struct msg_que
{
mss->tsk = current;
mss->msgsz = msgsz;
+ /*
+ * No memory barrier required: we did ipc_lock_object(),
+ * and the waker obtains that lock before calling wake_q_add().
+ */
__set_current_state(TASK_INTERRUPTIBLE);
list_add_tail(&mss->list, &msq->q_senders);
}
@@ -237,8 +251,11 @@ static void expunge_all(struct msg_queue
struct msg_receiver *msr, *t;
list_for_each_entry_safe(msr, t, &msq->q_receivers, r_list) {
- wake_q_add(wake_q, msr->r_tsk);
- WRITE_ONCE(msr->r_msg, ERR_PTR(res));
+ get_task_struct(msr->r_tsk);
+
+ /* see MSG_BARRIER for purpose/pairing */
+ smp_store_release(&msr->r_msg, ERR_PTR(res));
+ wake_q_add_safe(wake_q, msr->r_tsk);
}
}
@@ -798,13 +815,17 @@ static inline int pipelined_send(struct
list_del(&msr->r_list);
if (msr->r_maxsize < msg->m_ts) {
wake_q_add(wake_q, msr->r_tsk);
- WRITE_ONCE(msr->r_msg, ERR_PTR(-E2BIG));
+
+ /* See expunge_all regarding memory barrier */
+ smp_store_release(&msr->r_msg, ERR_PTR(-E2BIG));
} else {
ipc_update_pid(&msq->q_lrpid, task_pid(msr->r_tsk));
msq->q_rtime = ktime_get_real_seconds();
wake_q_add(wake_q, msr->r_tsk);
- WRITE_ONCE(msr->r_msg, msg);
+
+ /* See expunge_all regarding memory barrier */
+ smp_store_release(&msr->r_msg, msg);
return 1;
}
}
@@ -1154,7 +1175,11 @@ static long do_msgrcv(int msqid, void __
msr_d.r_maxsize = INT_MAX;
else
msr_d.r_maxsize = bufsz;
- msr_d.r_msg = ERR_PTR(-EAGAIN);
+
+ /* memory barrier not require due to ipc_lock_object() */
+ WRITE_ONCE(msr_d.r_msg, ERR_PTR(-EAGAIN));
+
+ /* memory barrier not required, we own ipc_lock_object() */
__set_current_state(TASK_INTERRUPTIBLE);
ipc_unlock_object(&msq->q_perm);
@@ -1183,8 +1208,12 @@ static long do_msgrcv(int msqid, void __
* signal) it will either see the message and continue ...
*/
msg = READ_ONCE(msr_d.r_msg);
- if (msg != ERR_PTR(-EAGAIN))
+ if (msg != ERR_PTR(-EAGAIN)) {
+ /* see MSG_BARRIER for purpose/pairing */
+ smp_acquire__after_ctrl_dep();
+
goto out_unlock1;
+ }
/*
* ... or see -EAGAIN, acquire the lock to check the message
@@ -1192,7 +1221,7 @@ static long do_msgrcv(int msqid, void __
*/
ipc_lock_object(&msq->q_perm);
- msg = msr_d.r_msg;
+ msg = READ_ONCE(msr_d.r_msg);
if (msg != ERR_PTR(-EAGAIN))
goto out_unlock0;
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 18/67] ipc/sem.c: document and update memory barriers
2020-02-04 1:33 incoming Andrew Morton
` (16 preceding siblings ...)
2020-02-04 1:34 ` [patch 17/67] ipc/msg.c: update and document " Andrew Morton
@ 2020-02-04 1:34 ` Andrew Morton
2020-02-04 1:34 ` [patch 19/67] ipc/msg.c: consolidate all xxxctl_down() functions Andrew Morton
` (51 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:34 UTC (permalink / raw)
To: 1vier1, akpm, dave, linux-mm, longman, manfred, mm-commits,
peterz, torvalds, will.deacon
From: Manfred Spraul <manfred@colorfullife.com>
Subject: ipc/sem.c: document and update memory barriers
Document and update the memory barriers in ipc/sem.c:
- Add smp_store_release() to wake_up_sem_queue_prepare() and
document why it is needed.
- Read q->status using READ_ONCE+smp_acquire__after_ctrl_dep().
as the pair for the barrier inside wake_up_sem_queue_prepare().
- Add comments to all barriers, and mention the rules in the block
regarding locking.
- Switch to using wake_q_add_safe().
Link: http://lkml.kernel.org/r/20191020123305.14715-6-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <1vier1@web.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
ipc/sem.c | 66 ++++++++++++++++++++++++++++++++--------------------
1 file changed, 41 insertions(+), 25 deletions(-)
--- a/ipc/sem.c~ipc-semc-document-and-update-memory-barriers
+++ a/ipc/sem.c
@@ -205,15 +205,38 @@ static int sysvipc_sem_proc_show(struct
*
* Memory ordering:
* Most ordering is enforced by using spin_lock() and spin_unlock().
- * The special case is use_global_lock:
+ *
+ * Exceptions:
+ * 1) use_global_lock: (SEM_BARRIER_1)
* Setting it from non-zero to 0 is a RELEASE, this is ensured by
- * using smp_store_release().
+ * using smp_store_release(): Immediately after setting it to 0,
+ * a simple op can start.
* Testing if it is non-zero is an ACQUIRE, this is ensured by using
* smp_load_acquire().
* Setting it from 0 to non-zero must be ordered with regards to
* this smp_load_acquire(), this is guaranteed because the smp_load_acquire()
* is inside a spin_lock() and after a write from 0 to non-zero a
* spin_lock()+spin_unlock() is done.
+ *
+ * 2) queue.status: (SEM_BARRIER_2)
+ * Initialization is done while holding sem_lock(), so no further barrier is
+ * required.
+ * Setting it to a result code is a RELEASE, this is ensured by both a
+ * smp_store_release() (for case a) and while holding sem_lock()
+ * (for case b).
+ * The AQUIRE when reading the result code without holding sem_lock() is
+ * achieved by using READ_ONCE() + smp_acquire__after_ctrl_dep().
+ * (case a above).
+ * Reading the result code while holding sem_lock() needs no further barriers,
+ * the locks inside sem_lock() enforce ordering (case b above)
+ *
+ * 3) current->state:
+ * current->state is set to TASK_INTERRUPTIBLE while holding sem_lock().
+ * The wakeup is handled using the wake_q infrastructure. wake_q wakeups may
+ * happen immediately after calling wake_q_add. As wake_q_add_safe() is called
+ * when holding sem_lock(), no further barriers are required.
+ *
+ * See also ipc/mqueue.c for more details on the covered races.
*/
#define sc_semmsl sem_ctls[0]
@@ -344,12 +367,8 @@ static void complexmode_tryleave(struct
return;
}
if (sma->use_global_lock == 1) {
- /*
- * Immediately after setting use_global_lock to 0,
- * a simple op can start. Thus: all memory writes
- * performed by the current operation must be visible
- * before we set use_global_lock to 0.
- */
+
+ /* See SEM_BARRIER_1 for purpose/pairing */
smp_store_release(&sma->use_global_lock, 0);
} else {
sma->use_global_lock--;
@@ -400,7 +419,7 @@ static inline int sem_lock(struct sem_ar
*/
spin_lock(&sem->lock);
- /* pairs with smp_store_release() */
+ /* see SEM_BARRIER_1 for purpose/pairing */
if (!smp_load_acquire(&sma->use_global_lock)) {
/* fast path successful! */
return sops->sem_num;
@@ -766,15 +785,12 @@ would_block:
static inline void wake_up_sem_queue_prepare(struct sem_queue *q, int error,
struct wake_q_head *wake_q)
{
- wake_q_add(wake_q, q->sleeper);
- /*
- * Rely on the above implicit barrier, such that we can
- * ensure that we hold reference to the task before setting
- * q->status. Otherwise we could race with do_exit if the
- * task is awoken by an external event before calling
- * wake_up_process().
- */
- WRITE_ONCE(q->status, error);
+ get_task_struct(q->sleeper);
+
+ /* see SEM_BARRIER_2 for purpuse/pairing */
+ smp_store_release(&q->status, error);
+
+ wake_q_add_safe(wake_q, q->sleeper);
}
static void unlink_queue(struct sem_array *sma, struct sem_queue *q)
@@ -2148,9 +2164,11 @@ static long do_semtimedop(int semid, str
}
do {
+ /* memory ordering ensured by the lock in sem_lock() */
WRITE_ONCE(queue.status, -EINTR);
queue.sleeper = current;
+ /* memory ordering is ensured by the lock in sem_lock() */
__set_current_state(TASK_INTERRUPTIBLE);
sem_unlock(sma, locknum);
rcu_read_unlock();
@@ -2173,13 +2191,8 @@ static long do_semtimedop(int semid, str
*/
error = READ_ONCE(queue.status);
if (error != -EINTR) {
- /*
- * User space could assume that semop() is a memory
- * barrier: Without the mb(), the cpu could
- * speculatively read in userspace stale data that was
- * overwritten by the previous owner of the semaphore.
- */
- smp_mb();
+ /* see SEM_BARRIER_2 for purpose/pairing */
+ smp_acquire__after_ctrl_dep();
goto out_free;
}
@@ -2189,6 +2202,9 @@ static long do_semtimedop(int semid, str
if (!ipc_valid_object(&sma->sem_perm))
goto out_unlock_free;
+ /*
+ * No necessity for any barrier: We are protect by sem_lock()
+ */
error = READ_ONCE(queue.status);
/*
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 19/67] ipc/msg.c: consolidate all xxxctl_down() functions
2020-02-04 1:33 incoming Andrew Morton
` (17 preceding siblings ...)
2020-02-04 1:34 ` [patch 18/67] ipc/sem.c: document and update " Andrew Morton
@ 2020-02-04 1:34 ` Andrew Morton
2020-02-04 1:34 ` [patch 20/67] drivers/block/null_blk_main.c: fix layout Andrew Morton
` (50 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:34 UTC (permalink / raw)
To: akpm, arnd, axboe, dave, linux-mm, manfred, mm-commits,
natechancellor, neilb, shli, shuaibinglu, torvalds
From: Lu Shuaibing <shuaibinglu@126.com>
Subject: ipc/msg.c: consolidate all xxxctl_down() functions
A use of uninitialized memory in msgctl_down() because msqid64 in
ksys_msgctl hasn't been initialized. The local | msqid64 | is created in
ksys_msgctl() and then passed into msgctl_down(). Along the way msqid64
is never initialized before msgctl_down() checks msqid64->msg_qbytes.
KUMSAN(KernelUninitializedMemorySantizer, a new error detection tool)
reports:
==================================================================
BUG: KUMSAN: use of uninitialized memory in msgctl_down+0x94/0x300
Read of size 8 at addr ffff88806bb97eb8 by task syz-executor707/2022
CPU: 0 PID: 2022 Comm: syz-executor707 Not tainted 5.2.0-rc4+ #63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
Call Trace:
dump_stack+0x75/0xae
__kumsan_report+0x17c/0x3e6
kumsan_report+0xe/0x20
msgctl_down+0x94/0x300
ksys_msgctl.constprop.14+0xef/0x260
do_syscall_64+0x7e/0x1f0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x4400e9
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffd869e0598 EFLAGS: 00000246 ORIG_RAX: 0000000000000047
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004400e9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00000000006ca018 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000ffffffff R11: 0000000000000246 R12: 0000000000401970
R13: 0000000000401a00 R14: 0000000000000000 R15: 0000000000000000
The buggy address belongs to the page:
page:ffffea0001aee5c0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x100000000000000()
raw: 0100000000000000 0000000000000000 ffffffff01ae0101 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kumsan: bad access detected
==================================================================
Syzkaller reproducer:
msgctl$IPC_RMID(0x0, 0x0)
C reproducer:
// autogenerated by syzkaller (https://github.com/google/syzkaller)
int main(void)
{
syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0);
syscall(__NR_msgctl, 0, 0, 0);
return 0;
}
[natechancellor@gmail.com: adjust indentation in ksys_msgctl]
Link: https://github.com/ClangBuiltLinux/linux/issues/829
Link: http://lkml.kernel.org/r/20191218032932.37479-1-natechancellor@gmail.com
Link: http://lkml.kernel.org/r/20190613014044.24234-1-shuaibinglu@126.com
Signed-off-by: Lu Shuaibing <shuaibinglu@126.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: NeilBrown <neilb@suse.com>
From: Andrew Morton <akpm@linux-foundation.org>
Subject: drivers/block/null_blk_main.c: fix layout
Each line here overflows 80 cols by exactly one character. Delete one tab
per line to fix.
Cc: Shaohua Li <shli@fb.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
ipc/msg.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
--- a/ipc/msg.c~ipc-consolidate-all-xxxctl_down-functions
+++ a/ipc/msg.c
@@ -394,7 +394,7 @@ copy_msqid_from_user(struct msqid64_ds *
* NOTE: no locks must be held, the rwsem is taken inside this function.
*/
static int msgctl_down(struct ipc_namespace *ns, int msqid, int cmd,
- struct msqid64_ds *msqid64)
+ struct ipc64_perm *perm, int msg_qbytes)
{
struct kern_ipc_perm *ipcp;
struct msg_queue *msq;
@@ -404,7 +404,7 @@ static int msgctl_down(struct ipc_namesp
rcu_read_lock();
ipcp = ipcctl_obtain_check(ns, &msg_ids(ns), msqid, cmd,
- &msqid64->msg_perm, msqid64->msg_qbytes);
+ perm, msg_qbytes);
if (IS_ERR(ipcp)) {
err = PTR_ERR(ipcp);
goto out_unlock1;
@@ -426,18 +426,18 @@ static int msgctl_down(struct ipc_namesp
{
DEFINE_WAKE_Q(wake_q);
- if (msqid64->msg_qbytes > ns->msg_ctlmnb &&
+ if (msg_qbytes > ns->msg_ctlmnb &&
!capable(CAP_SYS_RESOURCE)) {
err = -EPERM;
goto out_unlock1;
}
ipc_lock_object(&msq->q_perm);
- err = ipc_update_perm(&msqid64->msg_perm, ipcp);
+ err = ipc_update_perm(perm, ipcp);
if (err)
goto out_unlock0;
- msq->q_qbytes = msqid64->msg_qbytes;
+ msq->q_qbytes = msg_qbytes;
msq->q_ctime = ktime_get_real_seconds();
/*
@@ -618,9 +618,10 @@ static long ksys_msgctl(int msqid, int c
case IPC_SET:
if (copy_msqid_from_user(&msqid64, buf, version))
return -EFAULT;
- /* fallthru */
+ return msgctl_down(ns, msqid, cmd, &msqid64.msg_perm,
+ msqid64.msg_qbytes);
case IPC_RMID:
- return msgctl_down(ns, msqid, cmd, &msqid64);
+ return msgctl_down(ns, msqid, cmd, NULL, 0);
default:
return -EINVAL;
}
@@ -752,9 +753,9 @@ static long compat_ksys_msgctl(int msqid
case IPC_SET:
if (copy_compat_msqid_from_user(&msqid64, uptr, version))
return -EFAULT;
- /* fallthru */
+ return msgctl_down(ns, msqid, cmd, &msqid64.msg_perm, msqid64.msg_qbytes);
case IPC_RMID:
- return msgctl_down(ns, msqid, cmd, &msqid64);
+ return msgctl_down(ns, msqid, cmd, NULL, 0);
default:
return -EINVAL;
}
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 20/67] drivers/block/null_blk_main.c: fix layout
2020-02-04 1:33 incoming Andrew Morton
` (18 preceding siblings ...)
2020-02-04 1:34 ` [patch 19/67] ipc/msg.c: consolidate all xxxctl_down() functions Andrew Morton
@ 2020-02-04 1:34 ` Andrew Morton
2020-02-04 1:34 ` [patch 21/67] drivers/block/null_blk_main.c: fix uninitialized var warnings Andrew Morton
` (49 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:34 UTC (permalink / raw)
To: akpm, axboe, linux-mm, mm-commits, shli, torvalds
From: Andrew Morton <akpm@linux-foundation.org>
Subject: drivers/block/null_blk_main.c: fix layout
Each line here overflows 80 cols by exactly one character. Delete one tab
per line to fix.
Cc: Shaohua Li <shli@fb.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/block/null_blk_main.c | 56 ++++++++++++++++----------------
1 file changed, 28 insertions(+), 28 deletions(-)
--- a/drivers/block/null_blk_main.c~drivers-block-null_blk_mainc-fix-layout
+++ a/drivers/block/null_blk_main.c
@@ -263,34 +263,34 @@ static ssize_t nullb_device_bool_attr_st
}
/* The following macro should only be used with TYPE = {uint, ulong, bool}. */
-#define NULLB_DEVICE_ATTR(NAME, TYPE, APPLY) \
-static ssize_t \
-nullb_device_##NAME##_show(struct config_item *item, char *page) \
-{ \
- return nullb_device_##TYPE##_attr_show( \
- to_nullb_device(item)->NAME, page); \
-} \
-static ssize_t \
-nullb_device_##NAME##_store(struct config_item *item, const char *page, \
- size_t count) \
-{ \
- int (*apply_fn)(struct nullb_device *dev, TYPE new_value) = APPLY; \
- struct nullb_device *dev = to_nullb_device(item); \
- TYPE new_value; \
- int ret; \
- \
- ret = nullb_device_##TYPE##_attr_store(&new_value, page, count); \
- if (ret < 0) \
- return ret; \
- if (apply_fn) \
- ret = apply_fn(dev, new_value); \
- else if (test_bit(NULLB_DEV_FL_CONFIGURED, &dev->flags)) \
- ret = -EBUSY; \
- if (ret < 0) \
- return ret; \
- dev->NAME = new_value; \
- return count; \
-} \
+#define NULLB_DEVICE_ATTR(NAME, TYPE, APPLY) \
+static ssize_t \
+nullb_device_##NAME##_show(struct config_item *item, char *page) \
+{ \
+ return nullb_device_##TYPE##_attr_show( \
+ to_nullb_device(item)->NAME, page); \
+} \
+static ssize_t \
+nullb_device_##NAME##_store(struct config_item *item, const char *page, \
+ size_t count) \
+{ \
+ int (*apply_fn)(struct nullb_device *dev, TYPE new_value) = APPLY;\
+ struct nullb_device *dev = to_nullb_device(item); \
+ TYPE new_value; \
+ int ret; \
+ \
+ ret = nullb_device_##TYPE##_attr_store(&new_value, page, count);\
+ if (ret < 0) \
+ return ret; \
+ if (apply_fn) \
+ ret = apply_fn(dev, new_value); \
+ else if (test_bit(NULLB_DEV_FL_CONFIGURED, &dev->flags)) \
+ ret = -EBUSY; \
+ if (ret < 0) \
+ return ret; \
+ dev->NAME = new_value; \
+ return count; \
+} \
CONFIGFS_ATTR(nullb_device_, NAME);
static int nullb_apply_submit_queues(struct nullb_device *dev,
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 21/67] drivers/block/null_blk_main.c: fix uninitialized var warnings
2020-02-04 1:33 incoming Andrew Morton
` (19 preceding siblings ...)
2020-02-04 1:34 ` [patch 20/67] drivers/block/null_blk_main.c: fix layout Andrew Morton
@ 2020-02-04 1:34 ` Andrew Morton
2020-02-04 1:34 ` [patch 22/67] pinctrl: fix pxa2xx.c build warnings Andrew Morton
` (48 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:34 UTC (permalink / raw)
To: akpm, axboe, linux-mm, mm-commits, shli, torvalds
From: Andrew Morton <akpm@linux-foundation.org>
Subject: drivers/block/null_blk_main.c: fix uninitialized var warnings
With gcc-7.2, many instances of
drivers/block/null_blk_main.c: In function ‘nullb_device_zone_nr_conv_store’:
drivers/block/null_blk_main.c:291:12: warning: ‘new_value’ may be used uninitialized in this function [-Wmaybe-uninitialized]
dev->NAME = new_value; \
^
drivers/block/null_blk_main.c:279:7: note: ‘new_value’ was declared here
TYPE new_value; \
^
Presumably notabug, so use uninitialized_var() to suppress them.
Cc: Shaohua Li <shli@fb.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/block/null_blk_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/block/null_blk_main.c~drivers-block-null_blk_mainc-fix-uninitialized-var-warnings
+++ a/drivers/block/null_blk_main.c
@@ -276,7 +276,7 @@ nullb_device_##NAME##_store(struct confi
{ \
int (*apply_fn)(struct nullb_device *dev, TYPE new_value) = APPLY;\
struct nullb_device *dev = to_nullb_device(item); \
- TYPE new_value; \
+ TYPE uninitialized_var(new_value); \
int ret; \
\
ret = nullb_device_##TYPE##_attr_store(&new_value, page, count);\
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 22/67] pinctrl: fix pxa2xx.c build warnings
2020-02-04 1:33 incoming Andrew Morton
` (20 preceding siblings ...)
2020-02-04 1:34 ` [patch 21/67] drivers/block/null_blk_main.c: fix uninitialized var warnings Andrew Morton
@ 2020-02-04 1:34 ` Andrew Morton
2020-02-04 1:34 ` [patch 23/67] mm: remove __krealloc Andrew Morton
` (47 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:34 UTC (permalink / raw)
To: akpm, linux-mm, mm-commits, rdunlap, robert.jarzmik, torvalds
From: Randy Dunlap <rdunlap@infradead.org>
Subject: pinctrl: fix pxa2xx.c build warnings
Add #include of <linux/pinctrl/machine.h> to fix build
warnings in pinctrl-pxa2xx.c. Fixes these warnings:
In file included from ../drivers/pinctrl/pxa/pinctrl-pxa2xx.c:24:0:
../drivers/pinctrl/pxa/../pinctrl-utils.h:36:8: warning: `enum pinctrl_map_type' declared inside parameter list [enabled by default]
enum pinctrl_map_type type);
^
../drivers/pinctrl/pxa/../pinctrl-utils.h:36:8: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
Link: http://lkml.kernel.org/r/0024542e-cba9-8f13-6c18-32d0050a6007@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/pinctrl/pxa/pinctrl-pxa2xx.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/pinctrl/pxa/pinctrl-pxa2xx.c~pinctrl-fix-pxa2xxc-build-warnings
+++ a/drivers/pinctrl/pxa/pinctrl-pxa2xx.c
@@ -10,6 +10,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/module.h>
+#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinmux.h>
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 23/67] mm: remove __krealloc
2020-02-04 1:33 incoming Andrew Morton
` (21 preceding siblings ...)
2020-02-04 1:34 ` [patch 22/67] pinctrl: fix pxa2xx.c build warnings Andrew Morton
@ 2020-02-04 1:34 ` Andrew Morton
2020-02-04 1:35 ` [patch 24/67] mm: add generic p?d_leaf() macros Andrew Morton
` (46 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:34 UTC (permalink / raw)
To: akpm, cl, david, fw, iamjoonsoo.kim, linux-mm, mm-commits,
penberg, rientjes, torvalds
From: Florian Westphal <fw@strlen.de>
Subject: mm: remove __krealloc
Since 5.5-rc1 the last user of this function is gone, so remove the
functionality.
See commit
2ad9d7747c10 ("netfilter: conntrack: free extension area immediately")
for details.
Link: http://lkml.kernel.org/r/20191212223442.22141-1-fw@strlen.de
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/linux/slab.h | 1 -
mm/slab_common.c | 22 ----------------------
scripts/coccinelle/free/devm_free.cocci | 4 ----
3 files changed, 27 deletions(-)
--- a/include/linux/slab.h~mm-remove-__krealloc
+++ a/include/linux/slab.h
@@ -184,7 +184,6 @@ void memcg_deactivate_kmem_caches(struct
/*
* Common kmalloc functions provided by all allocators
*/
-void * __must_check __krealloc(const void *, size_t, gfp_t);
void * __must_check krealloc(const void *, size_t, gfp_t);
void kfree(const void *);
void kzfree(const void *);
--- a/mm/slab_common.c~mm-remove-__krealloc
+++ a/mm/slab_common.c
@@ -1677,28 +1677,6 @@ static __always_inline void *__do_kreall
}
/**
- * __krealloc - like krealloc() but don't free @p.
- * @p: object to reallocate memory for.
- * @new_size: how many bytes of memory are required.
- * @flags: the type of memory to allocate.
- *
- * This function is like krealloc() except it never frees the originally
- * allocated buffer. Use this if you don't want to free the buffer immediately
- * like, for example, with RCU.
- *
- * Return: pointer to the allocated memory or %NULL in case of error
- */
-void *__krealloc(const void *p, size_t new_size, gfp_t flags)
-{
- if (unlikely(!new_size))
- return ZERO_SIZE_PTR;
-
- return __do_krealloc(p, new_size, flags);
-
-}
-EXPORT_SYMBOL(__krealloc);
-
-/**
* krealloc - reallocate memory. The contents will remain unchanged.
* @p: object to reallocate memory for.
* @new_size: how many bytes of memory are required.
--- a/scripts/coccinelle/free/devm_free.cocci~mm-remove-__krealloc
+++ a/scripts/coccinelle/free/devm_free.cocci
@@ -91,8 +91,6 @@ position p;
|
kzfree@p(x)
|
- __krealloc@p(x, ...)
-|
krealloc@p(x, ...)
|
free_pages@p(x, ...)
@@ -116,8 +114,6 @@ position p != safe.p;
|
* kzfree@p(x)
|
-* __krealloc@p(x, ...)
-|
* krealloc@p(x, ...)
|
* free_pages@p(x, ...)
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 24/67] mm: add generic p?d_leaf() macros
2020-02-04 1:33 incoming Andrew Morton
` (22 preceding siblings ...)
2020-02-04 1:34 ` [patch 23/67] mm: remove __krealloc Andrew Morton
@ 2020-02-04 1:35 ` Andrew Morton
2020-02-04 1:35 ` [patch 25/67] arc: mm: add p?d_leaf() definitions Andrew Morton
` (45 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:35 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: mm: add generic p?d_leaf() macros
Patch series "Generic page walk and ptdump", v17.
Many architectures current have a debugfs file for dumping the kernel page
tables. Currently each architecture has to implement custom functions for
this because the details of walking the page tables used by the kernel are
different between architectures.
This series extends the capabilities of walk_page_range() so that it can
deal with the page tables of the kernel (which have no VMAs and can
contain larger huge pages than exist for user space). A generic PTDUMP
implementation is the implemented making use of the new functionality of
walk_page_range() and finally arm64 and x86 are switch to using it,
removing the custom table walkers.
To enable a generic page table walker to walk the unusual mappings of the
kernel we need to implement a set of functions which let us know when the
walker has reached the leaf entry. After a suggestion from Will Deacon
I've chosen the name p?d_leaf() as this (hopefully) describes the purpose
(and is a new name so has no historic baggage). Some architectures have
p?d_large macros but this is easily confused with "large pages".
This series ends with a generic PTDUMP implemention for arm64 and x86.
Mostly this is a clean up and there should be very little functional
change. The exceptions are:
* arm64 PTDUMP debugfs now displays pages which aren't present (patch 22).
* arm64 has the ability to efficiently process KASAN pages (which
previously only x86 implemented). This means that the combination of
KASAN and DEBUG_WX is now useable.
This patch (of 23):
Exposing the pud/pgd levels of the page tables to walk_page_range() means
we may come across the exotic large mappings that come with large areas of
contiguous memory (such as the kernel's linear map).
For architectures that don't provide all p?d_leaf() macros, provide
generic do nothing default that are suitable where there cannot be leaf
pages at that level. Futher patches will add implementations for
individual architectures.
The name p?d_leaf() is chosen to minimize the confusion with existing uses
of "large" pages and "huge" pages which do not necessary mean that the
entry is a leaf (for example it may be a set of contiguous entries that
only take 1 TLB slot). For the purpose of walking the page tables we
don't need to know how it will be represented in the TLB, but we do need
to know for sure if it is a leaf of the tree.
Link: http://lkml.kernel.org/r/20191218162402.45610-2-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/asm-generic/pgtable.h | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
--- a/include/asm-generic/pgtable.h~mm-add-generic-pd_leaf-macros
+++ a/include/asm-generic/pgtable.h
@@ -1238,4 +1238,24 @@ static inline bool arch_has_pfn_modify_c
#define mm_pmd_folded(mm) __is_defined(__PAGETABLE_PMD_FOLDED)
#endif
+/*
+ * p?d_leaf() - true if this entry is a final mapping to a physical address.
+ * This differs from p?d_huge() by the fact that they are always available (if
+ * the architecture supports large pages at the appropriate level) even
+ * if CONFIG_HUGETLB_PAGE is not defined.
+ * Only meaningful when called on a valid entry.
+ */
+#ifndef pgd_leaf
+#define pgd_leaf(x) 0
+#endif
+#ifndef p4d_leaf
+#define p4d_leaf(x) 0
+#endif
+#ifndef pud_leaf
+#define pud_leaf(x) 0
+#endif
+#ifndef pmd_leaf
+#define pmd_leaf(x) 0
+#endif
+
#endif /* _ASM_GENERIC_PGTABLE_H */
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 25/67] arc: mm: add p?d_leaf() definitions
2020-02-04 1:33 incoming Andrew Morton
` (23 preceding siblings ...)
2020-02-04 1:35 ` [patch 24/67] mm: add generic p?d_leaf() macros Andrew Morton
@ 2020-02-04 1:35 ` Andrew Morton
2020-02-04 1:35 ` [patch 26/67] arm: " Andrew Morton
` (44 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:35 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: arc: mm: add p?d_leaf() definitions
walk_page_range() is going to be allowed to walk page tables other than
those of user space. For this it needs to know when it has reached a
'leaf' entry in the page tables. This information will be provided by the
p?d_leaf() functions/macros.
For arc, we only have two levels, so only pmd_leaf() is needed.
Link: http://lkml.kernel.org/r/20191218162402.45610-3-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/arc/include/asm/pgtable.h | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arc/include/asm/pgtable.h~arc-mm-add-pd_leaf-definitions
+++ a/arch/arc/include/asm/pgtable.h
@@ -273,6 +273,7 @@ static inline void pmd_set(pmd_t *pmdp,
#define pmd_none(x) (!pmd_val(x))
#define pmd_bad(x) ((pmd_val(x) & ~PAGE_MASK))
#define pmd_present(x) (pmd_val(x))
+#define pmd_leaf(x) (pmd_val(x) & _PAGE_HW_SZ)
#define pmd_clear(xp) do { pmd_val(*(xp)) = 0; } while (0)
#define pte_page(pte) pfn_to_page(pte_pfn(pte))
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 26/67] arm: mm: add p?d_leaf() definitions
2020-02-04 1:33 incoming Andrew Morton
` (24 preceding siblings ...)
2020-02-04 1:35 ` [patch 25/67] arc: mm: add p?d_leaf() definitions Andrew Morton
@ 2020-02-04 1:35 ` Andrew Morton
2020-02-04 1:35 ` [patch 27/67] arm64: " Andrew Morton
` (43 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:35 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: arm: mm: add p?d_leaf() definitions
walk_page_range() is going to be allowed to walk page tables other than
those of user space. For this it needs to know when it has reached a
'leaf' entry in the page tables. This information is provided by the
p?d_leaf() functions/macros.
For arm pmd_large() already exists and does what we want. So simply
provide the generic pmd_leaf() name.
Link: http://lkml.kernel.org/r/20191218162402.45610-4-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/arm/include/asm/pgtable-2level.h | 1 +
arch/arm/include/asm/pgtable-3level.h | 1 +
2 files changed, 2 insertions(+)
--- a/arch/arm/include/asm/pgtable-2level.h~arm-mm-add-pd_leaf-definitions
+++ a/arch/arm/include/asm/pgtable-2level.h
@@ -189,6 +189,7 @@ static inline pmd_t *pmd_offset(pud_t *p
}
#define pmd_large(pmd) (pmd_val(pmd) & 2)
+#define pmd_leaf(pmd) (pmd_val(pmd) & 2)
#define pmd_bad(pmd) (pmd_val(pmd) & 2)
#define pmd_present(pmd) (pmd_val(pmd))
--- a/arch/arm/include/asm/pgtable-3level.h~arm-mm-add-pd_leaf-definitions
+++ a/arch/arm/include/asm/pgtable-3level.h
@@ -134,6 +134,7 @@
#define pmd_sect(pmd) ((pmd_val(pmd) & PMD_TYPE_MASK) == \
PMD_TYPE_SECT)
#define pmd_large(pmd) pmd_sect(pmd)
+#define pmd_leaf(pmd) pmd_sect(pmd)
#define pud_clear(pudp) \
do { \
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 27/67] arm64: mm: add p?d_leaf() definitions
2020-02-04 1:33 incoming Andrew Morton
` (25 preceding siblings ...)
2020-02-04 1:35 ` [patch 26/67] arm: " Andrew Morton
@ 2020-02-04 1:35 ` Andrew Morton
2020-02-04 1:35 ` [patch 28/67] mips: " Andrew Morton
` (42 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:35 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: arm64: mm: add p?d_leaf() definitions
walk_page_range() is going to be allowed to walk page tables other than
those of user space. For this it needs to know when it has reached a
'leaf' entry in the page tables. This information will be provided by the
p?d_leaf() functions/macros.
For arm64, we already have p?d_sect() macros which we can reuse for
p?d_leaf().
pud_sect() is defined as a dummy function when CONFIG_PGTABLE_LEVELS < 3
or CONFIG_ARM64_64K_PAGES is defined. However when the kernel is
configured this way then architecturally it isn't allowed to have a large
page at this level, and any code using these page walking macros is
implicitly relying on the page size/number of levels being the same as the
kernel. So it is safe to reuse this for p?d_leaf() as it is an
architectural restriction.
Link: http://lkml.kernel.org/r/20191218162402.45610-5-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/arm64/include/asm/pgtable.h | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm64/include/asm/pgtable.h~arm64-mm-add-pd_leaf-definitions
+++ a/arch/arm64/include/asm/pgtable.h
@@ -441,6 +441,7 @@ extern pgprot_t phys_mem_access_prot(str
PMD_TYPE_TABLE)
#define pmd_sect(pmd) ((pmd_val(pmd) & PMD_TYPE_MASK) == \
PMD_TYPE_SECT)
+#define pmd_leaf(pmd) pmd_sect(pmd)
#if defined(CONFIG_ARM64_64K_PAGES) || CONFIG_PGTABLE_LEVELS < 3
static inline bool pud_sect(pud_t pud) { return false; }
@@ -525,6 +526,7 @@ static inline void pte_unmap(pte_t *pte)
#define pud_none(pud) (!pud_val(pud))
#define pud_bad(pud) (!(pud_val(pud) & PUD_TABLE_BIT))
#define pud_present(pud) pte_present(pud_pte(pud))
+#define pud_leaf(pud) pud_sect(pud)
#define pud_valid(pud) pte_valid(pud_pte(pud))
static inline void set_pud(pud_t *pudp, pud_t pud)
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 28/67] mips: mm: add p?d_leaf() definitions
2020-02-04 1:33 incoming Andrew Morton
` (26 preceding siblings ...)
2020-02-04 1:35 ` [patch 27/67] arm64: " Andrew Morton
@ 2020-02-04 1:35 ` Andrew Morton
2020-02-04 1:35 ` [patch 29/67] powerpc: " Andrew Morton
` (41 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:35 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: mips: mm: add p?d_leaf() definitions
walk_page_range() is going to be allowed to walk page tables other than
those of user space. For this it needs to know when it has reached a
'leaf' entry in the page tables. This information is provided by the
p?d_leaf() functions/macros.
If _PAGE_HUGE is defined we can simply look for it. When not defined we
can be confident that there are no leaf pages in existence and fall back
on the generic implementation (added in a later patch) which returns 0.
Link: http://lkml.kernel.org/r/20191218162402.45610-6-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Acked-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/mips/include/asm/pgtable.h | 5 +++++
1 file changed, 5 insertions(+)
--- a/arch/mips/include/asm/pgtable.h~mips-mm-add-pd_leaf-definitions
+++ a/arch/mips/include/asm/pgtable.h
@@ -639,6 +639,11 @@ static inline pmd_t pmdp_huge_get_and_cl
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+#ifdef _PAGE_HUGE
+#define pmd_leaf(pmd) ((pmd_val(pmd) & _PAGE_HUGE) != 0)
+#define pud_leaf(pud) ((pud_val(pud) & _PAGE_HUGE) != 0)
+#endif
+
#define gup_fast_permitted(start, end) (!cpu_has_dc_aliases)
#include <asm-generic/pgtable.h>
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 29/67] powerpc: mm: add p?d_leaf() definitions
2020-02-04 1:33 incoming Andrew Morton
` (27 preceding siblings ...)
2020-02-04 1:35 ` [patch 28/67] mips: " Andrew Morton
@ 2020-02-04 1:35 ` Andrew Morton
2020-02-04 1:35 ` [patch 30/67] riscv: " Andrew Morton
` (40 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:35 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: powerpc: mm: add p?d_leaf() definitions
walk_page_range() is going to be allowed to walk page tables other than
those of user space. For this it needs to know when it has reached a
'leaf' entry in the page tables. This information is provided by the
p?d_leaf() functions/macros.
For powerpc p?d_is_leaf() functions already exist. Export them using the
new p?d_leaf() name.
Link: http://lkml.kernel.org/r/20191218162402.45610-7-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/powerpc/include/asm/book3s/64/pgtable.h | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h~powerpc-mm-add-pd_leaf-definitions
+++ a/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -1355,18 +1355,21 @@ static inline bool is_pte_rw_upgrade(uns
* Like pmd_huge() and pmd_large(), but works regardless of config options
*/
#define pmd_is_leaf pmd_is_leaf
+#define pmd_leaf pmd_is_leaf
static inline bool pmd_is_leaf(pmd_t pmd)
{
return !!(pmd_raw(pmd) & cpu_to_be64(_PAGE_PTE));
}
#define pud_is_leaf pud_is_leaf
+#define pud_leaf pud_is_leaf
static inline bool pud_is_leaf(pud_t pud)
{
return !!(pud_raw(pud) & cpu_to_be64(_PAGE_PTE));
}
#define pgd_is_leaf pgd_is_leaf
+#define pgd_leaf pgd_is_leaf
static inline bool pgd_is_leaf(pgd_t pgd)
{
return !!(pgd_raw(pgd) & cpu_to_be64(_PAGE_PTE));
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 30/67] riscv: mm: add p?d_leaf() definitions
2020-02-04 1:33 incoming Andrew Morton
` (28 preceding siblings ...)
2020-02-04 1:35 ` [patch 29/67] powerpc: " Andrew Morton
@ 2020-02-04 1:35 ` Andrew Morton
2020-02-04 1:35 ` [patch 31/67] s390: " Andrew Morton
` (39 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:35 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: riscv: mm: add p?d_leaf() definitions
walk_page_range() is going to be allowed to walk page tables other than
those of user space. For this it needs to know when it has reached a
'leaf' entry in the page tables. This information is provided by the
p?d_leaf() functions/macros.
For riscv a page is a leaf page when it has a read, write or execute bit
set on it.
Link: http://lkml.kernel.org/r/20191218162402.45610-8-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Zong Li <zong.li@sifive.com>
Acked-by: Paul Walmsley <paul.walmsley@sifive.com> [arch/riscv]
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/riscv/include/asm/pgtable-64.h | 7 +++++++
arch/riscv/include/asm/pgtable.h | 7 +++++++
2 files changed, 14 insertions(+)
--- a/arch/riscv/include/asm/pgtable-64.h~riscv-mm-add-pd_leaf-definitions
+++ a/arch/riscv/include/asm/pgtable-64.h
@@ -43,6 +43,13 @@ static inline int pud_bad(pud_t pud)
return !pud_present(pud);
}
+#define pud_leaf pud_leaf
+static inline int pud_leaf(pud_t pud)
+{
+ return pud_present(pud) &&
+ (pud_val(pud) & (_PAGE_READ | _PAGE_WRITE | _PAGE_EXEC));
+}
+
static inline void set_pud(pud_t *pudp, pud_t pud)
{
*pudp = pud;
--- a/arch/riscv/include/asm/pgtable.h~riscv-mm-add-pd_leaf-definitions
+++ a/arch/riscv/include/asm/pgtable.h
@@ -130,6 +130,13 @@ static inline int pmd_bad(pmd_t pmd)
return !pmd_present(pmd);
}
+#define pmd_leaf pmd_leaf
+static inline int pmd_leaf(pmd_t pmd)
+{
+ return pmd_present(pmd) &&
+ (pmd_val(pmd) & (_PAGE_READ | _PAGE_WRITE | _PAGE_EXEC));
+}
+
static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
{
*pmdp = pmd;
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 31/67] s390: mm: add p?d_leaf() definitions
2020-02-04 1:33 incoming Andrew Morton
` (29 preceding siblings ...)
2020-02-04 1:35 ` [patch 30/67] riscv: " Andrew Morton
@ 2020-02-04 1:35 ` Andrew Morton
2020-02-04 1:35 ` [patch 32/67] sparc: " Andrew Morton
` (38 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:35 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: s390: mm: add p?d_leaf() definitions
walk_page_range() is going to be allowed to walk page tables other than
those of user space. For this it needs to know when it has reached a
'leaf' entry in the page tables. This information is provided by the
p?d_leaf() functions/macros.
For s390, pud_large() and pmd_large() are already implemented as static
inline functions. Add a macro to provide the p?d_leaf names for the
generic code to use.
Link: http://lkml.kernel.org/r/20191218162402.45610-9-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/s390/include/asm/pgtable.h | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/s390/include/asm/pgtable.h~s390-mm-add-pd_leaf-definitions
+++ a/arch/s390/include/asm/pgtable.h
@@ -673,6 +673,7 @@ static inline int pud_none(pud_t pud)
return pud_val(pud) == _REGION3_ENTRY_EMPTY;
}
+#define pud_leaf pud_large
static inline int pud_large(pud_t pud)
{
if ((pud_val(pud) & _REGION_ENTRY_TYPE_MASK) != _REGION_ENTRY_TYPE_R3)
@@ -690,6 +691,7 @@ static inline unsigned long pud_pfn(pud_
return (pud_val(pud) & origin_mask) >> PAGE_SHIFT;
}
+#define pmd_leaf pmd_large
static inline int pmd_large(pmd_t pmd)
{
return (pmd_val(pmd) & _SEGMENT_ENTRY_LARGE) != 0;
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 32/67] sparc: mm: add p?d_leaf() definitions
2020-02-04 1:33 incoming Andrew Morton
` (30 preceding siblings ...)
2020-02-04 1:35 ` [patch 31/67] s390: " Andrew Morton
@ 2020-02-04 1:35 ` Andrew Morton
2020-02-04 1:35 ` [patch 33/67] x86: " Andrew Morton
` (37 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:35 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: sparc: mm: add p?d_leaf() definitions
walk_page_range() is going to be allowed to walk page tables other than
those of user space. For this it needs to know when it has reached a
'leaf' entry in the page tables. This information is provided by the
p?d_leaf() functions/macros.
For sparc 64 bit, pmd_large() and pud_large() are already provided, so add
macros to provide the p?d_leaf names required by the generic code.
Link: http://lkml.kernel.org/r/20191218162402.45610-10-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/sparc/include/asm/pgtable_64.h | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/sparc/include/asm/pgtable_64.h~sparc-mm-add-pd_leaf-definitions
+++ a/arch/sparc/include/asm/pgtable_64.h
@@ -683,6 +683,7 @@ static inline unsigned long pte_special(
return pte_val(pte) & _PAGE_SPECIAL;
}
+#define pmd_leaf pmd_large
static inline unsigned long pmd_large(pmd_t pmd)
{
pte_t pte = __pte(pmd_val(pmd));
@@ -867,6 +868,7 @@ static inline unsigned long pud_page_vad
/* only used by the stubbed out hugetlb gup code, should never be called */
#define p4d_page(p4d) NULL
+#define pud_leaf pud_large
static inline unsigned long pud_large(pud_t pud)
{
pte_t pte = __pte(pud_val(pud));
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 33/67] x86: mm: add p?d_leaf() definitions
2020-02-04 1:33 incoming Andrew Morton
` (31 preceding siblings ...)
2020-02-04 1:35 ` [patch 32/67] sparc: " Andrew Morton
@ 2020-02-04 1:35 ` Andrew Morton
2020-02-04 1:35 ` [patch 34/67] mm: pagewalk: add p4d_entry() and pgd_entry() Andrew Morton
` (36 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:35 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: x86: mm: add p?d_leaf() definitions
walk_page_range() is going to be allowed to walk page tables other than
those of user space. For this it needs to know when it has reached a
'leaf' entry in the page tables. This information is provided by the
p?d_leaf() functions/macros.
For x86 we already have p?d_large() functions, so simply add macros to
provide the generic p?d_leaf() names for the generic code.
Link: http://lkml.kernel.org/r/20191218162402.45610-11-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/x86/include/asm/pgtable.h | 5 +++++
1 file changed, 5 insertions(+)
--- a/arch/x86/include/asm/pgtable.h~x86-mm-add-pd_leaf-definitions
+++ a/arch/x86/include/asm/pgtable.h
@@ -239,6 +239,7 @@ static inline unsigned long pgd_pfn(pgd_
return (pgd_val(pgd) & PTE_PFN_MASK) >> PAGE_SHIFT;
}
+#define p4d_leaf p4d_large
static inline int p4d_large(p4d_t p4d)
{
/* No 512 GiB pages yet */
@@ -247,6 +248,7 @@ static inline int p4d_large(p4d_t p4d)
#define pte_page(pte) pfn_to_page(pte_pfn(pte))
+#define pmd_leaf pmd_large
static inline int pmd_large(pmd_t pte)
{
return pmd_flags(pte) & _PAGE_PSE;
@@ -874,6 +876,7 @@ static inline pmd_t *pmd_offset(pud_t *p
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}
+#define pud_leaf pud_large
static inline int pud_large(pud_t pud)
{
return (pud_val(pud) & (_PAGE_PSE | _PAGE_PRESENT)) ==
@@ -885,6 +888,7 @@ static inline int pud_bad(pud_t pud)
return (pud_flags(pud) & ~(_KERNPG_TABLE | _PAGE_USER)) != 0;
}
#else
+#define pud_leaf pud_large
static inline int pud_large(pud_t pud)
{
return 0;
@@ -1233,6 +1237,7 @@ static inline bool pgdp_maps_userspace(v
return (((ptr & ~PAGE_MASK) / sizeof(pgd_t)) < PGD_KERNEL_START);
}
+#define pgd_leaf pgd_large
static inline int pgd_large(pgd_t pgd) { return 0; }
#ifdef CONFIG_PAGE_TABLE_ISOLATION
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 34/67] mm: pagewalk: add p4d_entry() and pgd_entry()
2020-02-04 1:33 incoming Andrew Morton
` (32 preceding siblings ...)
2020-02-04 1:35 ` [patch 33/67] x86: " Andrew Morton
@ 2020-02-04 1:35 ` Andrew Morton
2020-02-04 1:35 ` [patch 35/67] mm: pagewalk: allow walking without vma Andrew Morton
` (35 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:35 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: mm: pagewalk: add p4d_entry() and pgd_entry()
pgd_entry() and pud_entry() were removed by commit 0b1fbfe50006c410
("mm/pagewalk: remove pgd_entry() and pud_entry()") because there were no
users. We're about to add users so reintroduce them, along with
p4d_entry() as we now have 5 levels of tables.
Note that commit a00cc7d9dd93d66a ("mm, x86: add support for PUD-sized
transparent hugepages") already re-added pud_entry() but with different
semantics to the other callbacks. This commit reverts the semantics back
to match the other callbacks.
To support hmm.c which now uses the new semantics of pud_entry() a new
member ('action') of struct mm_walk is added which allows the callbacks to
either descend (ACTION_SUBTREE, the default), skip (ACTION_CONTINUE) or
repeat the callback (ACTION_AGAIN). hmm.c is then updated to call
pud_trans_huge_lock() itself and make use of the splitting/retry logic of
the core code.
After this change pud_entry() is called for all entries, not just
transparent huge pages.
[arnd@arndb.de: fix unused variable warning]
Link: http://lkml.kernel.org/r/20200107204607.1533842-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/20191218162402.45610-12-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/linux/pagewalk.h | 34 +++++++++++++++++----
mm/hmm.c | 58 ++++++++++++++++++++-----------------
mm/pagewalk.c | 50 ++++++++++++++++++++++---------
3 files changed, 95 insertions(+), 47 deletions(-)
--- a/include/linux/pagewalk.h~mm-pagewalk-add-p4d_entry-and-pgd_entry
+++ a/include/linux/pagewalk.h
@@ -8,15 +8,15 @@ struct mm_walk;
/**
* mm_walk_ops - callbacks for walk_page_range
- * @pud_entry: if set, called for each non-empty PUD (2nd-level) entry
- * this handler should only handle pud_trans_huge() puds.
- * the pmd_entry or pte_entry callbacks will be used for
- * regular PUDs.
- * @pmd_entry: if set, called for each non-empty PMD (3rd-level) entry
+ * @pgd_entry: if set, called for each non-empty PGD (top-level) entry
+ * @p4d_entry: if set, called for each non-empty P4D entry
+ * @pud_entry: if set, called for each non-empty PUD entry
+ * @pmd_entry: if set, called for each non-empty PMD entry
* this handler is required to be able to handle
* pmd_trans_huge() pmds. They may simply choose to
* split_huge_page() instead of handling it explicitly.
- * @pte_entry: if set, called for each non-empty PTE (4th-level) entry
+ * @pte_entry: if set, called for each non-empty PTE (lowest-level)
+ * entry
* @pte_hole: if set, called for each hole at all levels
* @hugetlb_entry: if set, called for each hugetlb entry
* @test_walk: caller specific callback function to determine whether
@@ -27,8 +27,15 @@ struct mm_walk;
* @pre_vma: if set, called before starting walk on a non-null vma.
* @post_vma: if set, called after a walk on a non-null vma, provided
* that @pre_vma and the vma walk succeeded.
+ *
+ * p?d_entry callbacks are called even if those levels are folded on a
+ * particular architecture/configuration.
*/
struct mm_walk_ops {
+ int (*pgd_entry)(pgd_t *pgd, unsigned long addr,
+ unsigned long next, struct mm_walk *walk);
+ int (*p4d_entry)(p4d_t *p4d, unsigned long addr,
+ unsigned long next, struct mm_walk *walk);
int (*pud_entry)(pud_t *pud, unsigned long addr,
unsigned long next, struct mm_walk *walk);
int (*pmd_entry)(pmd_t *pmd, unsigned long addr,
@@ -47,11 +54,25 @@ struct mm_walk_ops {
void (*post_vma)(struct mm_walk *walk);
};
+/*
+ * Action for pud_entry / pmd_entry callbacks.
+ * ACTION_SUBTREE is the default
+ */
+enum page_walk_action {
+ /* Descend to next level, splitting huge pages if needed and possible */
+ ACTION_SUBTREE = 0,
+ /* Continue to next entry at this level (ignoring any subtree) */
+ ACTION_CONTINUE = 1,
+ /* Call again for this entry */
+ ACTION_AGAIN = 2
+};
+
/**
* mm_walk - walk_page_range data
* @ops: operation to call during the walk
* @mm: mm_struct representing the target process of page table walk
* @vma: vma currently walked (NULL if walking outside vmas)
+ * @action: next action to perform (see enum page_walk_action)
* @private: private data for callbacks' usage
*
* (see the comment on walk_page_range() for more details)
@@ -60,6 +81,7 @@ struct mm_walk {
const struct mm_walk_ops *ops;
struct mm_struct *mm;
struct vm_area_struct *vma;
+ enum page_walk_action action;
void *private;
};
--- a/mm/hmm.c~mm-pagewalk-add-p4d_entry-and-pgd_entry
+++ a/mm/hmm.c
@@ -474,23 +474,32 @@ static int hmm_vma_walk_pud(pud_t *pudp,
{
struct hmm_vma_walk *hmm_vma_walk = walk->private;
struct hmm_range *range = hmm_vma_walk->range;
- unsigned long addr = start, next;
- pmd_t *pmdp;
+ unsigned long addr = start;
pud_t pud;
- int ret;
+ int ret = 0;
+ spinlock_t *ptl = pud_trans_huge_lock(pudp, walk->vma);
+
+ if (!ptl)
+ return 0;
+
+ /* Normally we don't want to split the huge page */
+ walk->action = ACTION_CONTINUE;
-again:
pud = READ_ONCE(*pudp);
- if (pud_none(pud))
- return hmm_vma_walk_hole(start, end, walk);
+ if (pud_none(pud)) {
+ ret = hmm_vma_walk_hole(start, end, walk);
+ goto out_unlock;
+ }
if (pud_huge(pud) && pud_devmap(pud)) {
unsigned long i, npages, pfn;
uint64_t *pfns, cpu_flags;
bool fault, write_fault;
- if (!pud_present(pud))
- return hmm_vma_walk_hole(start, end, walk);
+ if (!pud_present(pud)) {
+ ret = hmm_vma_walk_hole(start, end, walk);
+ goto out_unlock;
+ }
i = (addr - range->start) >> PAGE_SHIFT;
npages = (end - addr) >> PAGE_SHIFT;
@@ -499,16 +508,20 @@ again:
cpu_flags = pud_to_hmm_pfn_flags(range, pud);
hmm_range_need_fault(hmm_vma_walk, pfns, npages,
cpu_flags, &fault, &write_fault);
- if (fault || write_fault)
- return hmm_vma_walk_hole_(addr, end, fault,
- write_fault, walk);
+ if (fault || write_fault) {
+ ret = hmm_vma_walk_hole_(addr, end, fault,
+ write_fault, walk);
+ goto out_unlock;
+ }
pfn = pud_pfn(pud) + ((addr & ~PUD_MASK) >> PAGE_SHIFT);
for (i = 0; i < npages; ++i, ++pfn) {
hmm_vma_walk->pgmap = get_dev_pagemap(pfn,
hmm_vma_walk->pgmap);
- if (unlikely(!hmm_vma_walk->pgmap))
- return -EBUSY;
+ if (unlikely(!hmm_vma_walk->pgmap)) {
+ ret = -EBUSY;
+ goto out_unlock;
+ }
pfns[i] = hmm_device_entry_from_pfn(range, pfn) |
cpu_flags;
}
@@ -517,22 +530,15 @@ again:
hmm_vma_walk->pgmap = NULL;
}
hmm_vma_walk->last = end;
- return 0;
+ goto out_unlock;
}
- split_huge_pud(walk->vma, pudp, addr);
- if (pud_none(*pudp))
- goto again;
-
- pmdp = pmd_offset(pudp, addr);
- do {
- next = pmd_addr_end(addr, end);
- ret = hmm_vma_walk_pmd(pmdp, addr, next, walk);
- if (ret)
- return ret;
- } while (pmdp++, addr = next, addr != end);
+ /* Ask for the PUD to be split */
+ walk->action = ACTION_SUBTREE;
- return 0;
+out_unlock:
+ spin_unlock(ptl);
+ return ret;
}
#else
#define hmm_vma_walk_pud NULL
--- a/mm/pagewalk.c~mm-pagewalk-add-p4d_entry-and-pgd_entry
+++ a/mm/pagewalk.c
@@ -46,6 +46,9 @@ again:
break;
continue;
}
+
+ walk->action = ACTION_SUBTREE;
+
/*
* This implies that each ->pmd_entry() handler
* needs to know about pmd_trans_huge() pmds
@@ -55,16 +58,21 @@ again:
if (err)
break;
+ if (walk->action == ACTION_AGAIN)
+ goto again;
+
/*
* Check this here so we only break down trans_huge
* pages when we _need_ to
*/
- if (!ops->pte_entry)
+ if (walk->action == ACTION_CONTINUE ||
+ !(ops->pte_entry))
continue;
split_huge_pmd(walk->vma, pmd, addr);
if (pmd_trans_unstable(pmd))
goto again;
+
err = walk_pte_range(pmd, addr, next, walk);
if (err)
break;
@@ -93,24 +101,25 @@ static int walk_pud_range(p4d_t *p4d, un
continue;
}
- if (ops->pud_entry) {
- spinlock_t *ptl = pud_trans_huge_lock(pud, walk->vma);
+ walk->action = ACTION_SUBTREE;
- if (ptl) {
- err = ops->pud_entry(pud, addr, next, walk);
- spin_unlock(ptl);
- if (err)
- break;
- continue;
- }
- }
+ if (ops->pud_entry)
+ err = ops->pud_entry(pud, addr, next, walk);
+ if (err)
+ break;
+
+ if (walk->action == ACTION_AGAIN)
+ goto again;
+
+ if (walk->action == ACTION_CONTINUE ||
+ !(ops->pmd_entry || ops->pte_entry))
+ continue;
split_huge_pud(walk->vma, pud, addr);
if (pud_none(*pud))
goto again;
- if (ops->pmd_entry || ops->pte_entry)
- err = walk_pmd_range(pud, addr, next, walk);
+ err = walk_pmd_range(pud, addr, next, walk);
if (err)
break;
} while (pud++, addr = next, addr != end);
@@ -136,7 +145,12 @@ static int walk_p4d_range(pgd_t *pgd, un
break;
continue;
}
- if (ops->pmd_entry || ops->pte_entry)
+ if (ops->p4d_entry) {
+ err = ops->p4d_entry(p4d, addr, next, walk);
+ if (err)
+ break;
+ }
+ if (ops->pud_entry || ops->pmd_entry || ops->pte_entry)
err = walk_pud_range(p4d, addr, next, walk);
if (err)
break;
@@ -163,7 +177,13 @@ static int walk_pgd_range(unsigned long
break;
continue;
}
- if (ops->pmd_entry || ops->pte_entry)
+ if (ops->pgd_entry) {
+ err = ops->pgd_entry(pgd, addr, next, walk);
+ if (err)
+ break;
+ }
+ if (ops->p4d_entry || ops->pud_entry || ops->pmd_entry ||
+ ops->pte_entry)
err = walk_p4d_range(pgd, addr, next, walk);
if (err)
break;
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 35/67] mm: pagewalk: allow walking without vma
2020-02-04 1:33 incoming Andrew Morton
` (33 preceding siblings ...)
2020-02-04 1:35 ` [patch 34/67] mm: pagewalk: add p4d_entry() and pgd_entry() Andrew Morton
@ 2020-02-04 1:35 ` Andrew Morton
2020-02-04 1:35 ` [patch 36/67] mm: pagewalk: don't lock PTEs for walk_page_range_novma() Andrew Morton
` (34 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:35 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: mm: pagewalk: allow walking without vma
Since 48684a65b4e3: "mm: pagewalk: fix misbehavior of walk_page_range for
vma(VM_PFNMAP)", page_table_walk() will report any kernel area as a hole,
because it lacks a vma.
This means each arch has re-implemented page table walking when needed,
for example in the per-arch ptdump walker.
Remove the requirement to have a vma in the generic code and add a new
function walk_page_range_novma() which ignores the VMAs and simply walks
the page tables.
Link: http://lkml.kernel.org/r/20191218162402.45610-13-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/linux/pagewalk.h | 5 ++++
mm/pagewalk.c | 40 +++++++++++++++++++++++++++++--------
2 files changed, 37 insertions(+), 8 deletions(-)
--- a/include/linux/pagewalk.h~mm-pagewalk-allow-walking-without-vma
+++ a/include/linux/pagewalk.h
@@ -73,6 +73,7 @@ enum page_walk_action {
* @mm: mm_struct representing the target process of page table walk
* @vma: vma currently walked (NULL if walking outside vmas)
* @action: next action to perform (see enum page_walk_action)
+ * @no_vma: walk ignoring vmas (vma will always be NULL)
* @private: private data for callbacks' usage
*
* (see the comment on walk_page_range() for more details)
@@ -82,12 +83,16 @@ struct mm_walk {
struct mm_struct *mm;
struct vm_area_struct *vma;
enum page_walk_action action;
+ bool no_vma;
void *private;
};
int walk_page_range(struct mm_struct *mm, unsigned long start,
unsigned long end, const struct mm_walk_ops *ops,
void *private);
+int walk_page_range_novma(struct mm_struct *mm, unsigned long start,
+ unsigned long end, const struct mm_walk_ops *ops,
+ void *private);
int walk_page_vma(struct vm_area_struct *vma, const struct mm_walk_ops *ops,
void *private);
int walk_page_mapping(struct address_space *mapping, pgoff_t first_index,
--- a/mm/pagewalk.c~mm-pagewalk-allow-walking-without-vma
+++ a/mm/pagewalk.c
@@ -39,7 +39,7 @@ static int walk_pmd_range(pud_t *pud, un
do {
again:
next = pmd_addr_end(addr, end);
- if (pmd_none(*pmd) || !walk->vma) {
+ if (pmd_none(*pmd) || (!walk->vma && !walk->no_vma)) {
if (ops->pte_hole)
err = ops->pte_hole(addr, next, walk);
if (err)
@@ -65,13 +65,16 @@ again:
* Check this here so we only break down trans_huge
* pages when we _need_ to
*/
- if (walk->action == ACTION_CONTINUE ||
+ if ((!walk->vma && (pmd_leaf(*pmd) || !pmd_present(*pmd))) ||
+ walk->action == ACTION_CONTINUE ||
!(ops->pte_entry))
continue;
- split_huge_pmd(walk->vma, pmd, addr);
- if (pmd_trans_unstable(pmd))
- goto again;
+ if (walk->vma) {
+ split_huge_pmd(walk->vma, pmd, addr);
+ if (pmd_trans_unstable(pmd))
+ goto again;
+ }
err = walk_pte_range(pmd, addr, next, walk);
if (err)
@@ -93,7 +96,7 @@ static int walk_pud_range(p4d_t *p4d, un
do {
again:
next = pud_addr_end(addr, end);
- if (pud_none(*pud) || !walk->vma) {
+ if (pud_none(*pud) || (!walk->vma && !walk->no_vma)) {
if (ops->pte_hole)
err = ops->pte_hole(addr, next, walk);
if (err)
@@ -111,11 +114,13 @@ static int walk_pud_range(p4d_t *p4d, un
if (walk->action == ACTION_AGAIN)
goto again;
- if (walk->action == ACTION_CONTINUE ||
+ if ((!walk->vma && (pud_leaf(*pud) || !pud_present(*pud))) ||
+ walk->action == ACTION_CONTINUE ||
!(ops->pmd_entry || ops->pte_entry))
continue;
- split_huge_pud(walk->vma, pud, addr);
+ if (walk->vma)
+ split_huge_pud(walk->vma, pud, addr);
if (pud_none(*pud))
goto again;
@@ -389,6 +394,25 @@ int walk_page_range(struct mm_struct *mm
return err;
}
+int walk_page_range_novma(struct mm_struct *mm, unsigned long start,
+ unsigned long end, const struct mm_walk_ops *ops,
+ void *private)
+{
+ struct mm_walk walk = {
+ .ops = ops,
+ .mm = mm,
+ .private = private,
+ .no_vma = true
+ };
+
+ if (start >= end || !walk.mm)
+ return -EINVAL;
+
+ lockdep_assert_held(&walk.mm->mmap_sem);
+
+ return __walk_page_range(start, end, &walk);
+}
+
int walk_page_vma(struct vm_area_struct *vma, const struct mm_walk_ops *ops,
void *private)
{
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 36/67] mm: pagewalk: don't lock PTEs for walk_page_range_novma()
2020-02-04 1:33 incoming Andrew Morton
` (34 preceding siblings ...)
2020-02-04 1:35 ` [patch 35/67] mm: pagewalk: allow walking without vma Andrew Morton
@ 2020-02-04 1:35 ` Andrew Morton
2020-02-04 1:35 ` [patch 37/67] mm: pagewalk: fix termination condition in walk_pte_range() Andrew Morton
` (33 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:35 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: mm: pagewalk: don't lock PTEs for walk_page_range_novma()
walk_page_range_novma() can be used to walk page tables or the kernel or
for firmware. These page tables may contain entries that are not backed
by a struct page and so it isn't (in general) possible to take the PTE
lock for the pte_entry() callback. So update walk_pte_range() to only
take the lock when no_vma==false by splitting out the inner loop to a
separate function and add a comment explaining the difference to
walk_page_range_novma().
Link: http://lkml.kernel.org/r/20191218162402.45610-14-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
mm/pagewalk.c | 35 ++++++++++++++++++++++++++++-------
1 file changed, 28 insertions(+), 7 deletions(-)
--- a/mm/pagewalk.c~mm-pagewalk-dont-lock-ptes-for-walk_page_range_novma
+++ a/mm/pagewalk.c
@@ -4,15 +4,12 @@
#include <linux/sched.h>
#include <linux/hugetlb.h>
-static int walk_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
- struct mm_walk *walk)
+static int walk_pte_range_inner(pte_t *pte, unsigned long addr,
+ unsigned long end, struct mm_walk *walk)
{
- pte_t *pte;
- int err = 0;
const struct mm_walk_ops *ops = walk->ops;
- spinlock_t *ptl;
+ int err = 0;
- pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl);
for (;;) {
err = ops->pte_entry(pte, addr, addr + PAGE_SIZE, walk);
if (err)
@@ -22,8 +19,26 @@ static int walk_pte_range(pmd_t *pmd, un
break;
pte++;
}
+ return err;
+}
+
+static int walk_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
+ struct mm_walk *walk)
+{
+ pte_t *pte;
+ int err = 0;
+ spinlock_t *ptl;
+
+ if (walk->no_vma) {
+ pte = pte_offset_map(pmd, addr);
+ err = walk_pte_range_inner(pte, addr, end, walk);
+ pte_unmap(pte);
+ } else {
+ pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl);
+ err = walk_pte_range_inner(pte, addr, end, walk);
+ pte_unmap_unlock(pte, ptl);
+ }
- pte_unmap_unlock(pte, ptl);
return err;
}
@@ -394,6 +409,12 @@ int walk_page_range(struct mm_struct *mm
return err;
}
+/*
+ * Similar to walk_page_range() but can walk any page tables even if they are
+ * not backed by VMAs. Because 'unusual' entries may be walked this function
+ * will also not lock the PTEs for the pte_entry() callback. This is useful for
+ * walking the kernel pages tables or page tables for firmware.
+ */
int walk_page_range_novma(struct mm_struct *mm, unsigned long start,
unsigned long end, const struct mm_walk_ops *ops,
void *private)
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 37/67] mm: pagewalk: fix termination condition in walk_pte_range()
2020-02-04 1:33 incoming Andrew Morton
` (35 preceding siblings ...)
2020-02-04 1:35 ` [patch 36/67] mm: pagewalk: don't lock PTEs for walk_page_range_novma() Andrew Morton
@ 2020-02-04 1:35 ` Andrew Morton
2020-02-04 1:36 ` [patch 38/67] mm: pagewalk: add 'depth' parameter to pte_hole Andrew Morton
` (32 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:35 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: mm: pagewalk: fix termination condition in walk_pte_range()
If walk_pte_range() is called with a 'end' argument that is beyond the
last page of memory (e.g. ~0UL) then the comparison between 'addr' and
'end' will always fail and the loop will be infinite. Instead change the
comparison to >= while accounting for overflow.
Link: http://lkml.kernel.org/r/20191218162402.45610-15-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
mm/pagewalk.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/mm/pagewalk.c~mm-pagewalk-fix-termination-condition-in-walk_pte_range
+++ a/mm/pagewalk.c
@@ -14,9 +14,9 @@ static int walk_pte_range_inner(pte_t *p
err = ops->pte_entry(pte, addr, addr + PAGE_SIZE, walk);
if (err)
break;
- addr += PAGE_SIZE;
- if (addr == end)
+ if (addr >= end - PAGE_SIZE)
break;
+ addr += PAGE_SIZE;
pte++;
}
return err;
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 38/67] mm: pagewalk: add 'depth' parameter to pte_hole
2020-02-04 1:33 incoming Andrew Morton
` (36 preceding siblings ...)
2020-02-04 1:35 ` [patch 37/67] mm: pagewalk: fix termination condition in walk_pte_range() Andrew Morton
@ 2020-02-04 1:36 ` Andrew Morton
2020-02-04 1:36 ` [patch 39/67] x86: mm: point to struct seq_file from struct pg_state Andrew Morton
` (31 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:36 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: mm: pagewalk: add 'depth' parameter to pte_hole
The pte_hole() callback is called at multiple levels of the page tables.
Code dumping the kernel page tables needs to know what at what depth the
missing entry is. Add this is an extra parameter to pte_hole(). When the
depth isn't know (e.g. processing a vma) then -1 is passed.
The depth that is reported is the actual level where the entry is missing
(ignoring any folding that is in place), i.e. any levels where
PTRS_PER_P?D is set to 1 are ignored.
Note that depth starts at 0 for a PGD so that PUD/PMD/PTE retain their
natural numbers as levels 2/3/4.
Link: http://lkml.kernel.org/r/20191218162402.45610-16-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Tested-by: Zong Li <zong.li@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
fs/proc/task_mmu.c | 4 ++--
include/linux/pagewalk.h | 7 +++++--
mm/hmm.c | 8 ++++----
mm/migrate.c | 5 +++--
mm/mincore.c | 1 +
mm/pagewalk.c | 31 +++++++++++++++++++++++++------
6 files changed, 40 insertions(+), 16 deletions(-)
--- a/fs/proc/task_mmu.c~mm-pagewalk-add-depth-parameter-to-pte_hole
+++ a/fs/proc/task_mmu.c
@@ -505,7 +505,7 @@ static void smaps_account(struct mem_siz
#ifdef CONFIG_SHMEM
static int smaps_pte_hole(unsigned long addr, unsigned long end,
- struct mm_walk *walk)
+ __always_unused int depth, struct mm_walk *walk)
{
struct mem_size_stats *mss = walk->private;
@@ -1282,7 +1282,7 @@ static int add_to_pagemap(unsigned long
}
static int pagemap_pte_hole(unsigned long start, unsigned long end,
- struct mm_walk *walk)
+ __always_unused int depth, struct mm_walk *walk)
{
struct pagemapread *pm = walk->private;
unsigned long addr = start;
--- a/include/linux/pagewalk.h~mm-pagewalk-add-depth-parameter-to-pte_hole
+++ a/include/linux/pagewalk.h
@@ -17,7 +17,10 @@ struct mm_walk;
* split_huge_page() instead of handling it explicitly.
* @pte_entry: if set, called for each non-empty PTE (lowest-level)
* entry
- * @pte_hole: if set, called for each hole at all levels
+ * @pte_hole: if set, called for each hole at all levels,
+ * depth is -1 if not known, 0:PGD, 1:P4D, 2:PUD, 3:PMD
+ * 4:PTE. Any folded depths (where PTRS_PER_P?D is equal
+ * to 1) are skipped.
* @hugetlb_entry: if set, called for each hugetlb entry
* @test_walk: caller specific callback function to determine whether
* we walk over the current vma or not. Returning 0 means
@@ -43,7 +46,7 @@ struct mm_walk_ops {
int (*pte_entry)(pte_t *pte, unsigned long addr,
unsigned long next, struct mm_walk *walk);
int (*pte_hole)(unsigned long addr, unsigned long next,
- struct mm_walk *walk);
+ int depth, struct mm_walk *walk);
int (*hugetlb_entry)(pte_t *pte, unsigned long hmask,
unsigned long addr, unsigned long next,
struct mm_walk *walk);
--- a/mm/hmm.c~mm-pagewalk-add-depth-parameter-to-pte_hole
+++ a/mm/hmm.c
@@ -186,7 +186,7 @@ static void hmm_range_need_fault(const s
}
static int hmm_vma_walk_hole(unsigned long addr, unsigned long end,
- struct mm_walk *walk)
+ __always_unused int depth, struct mm_walk *walk)
{
struct hmm_vma_walk *hmm_vma_walk = walk->private;
struct hmm_range *range = hmm_vma_walk->range;
@@ -380,7 +380,7 @@ static int hmm_vma_walk_pmd(pmd_t *pmdp,
again:
pmd = READ_ONCE(*pmdp);
if (pmd_none(pmd))
- return hmm_vma_walk_hole(start, end, walk);
+ return hmm_vma_walk_hole(start, end, -1, walk);
if (thp_migration_supported() && is_pmd_migration_entry(pmd)) {
bool fault, write_fault;
@@ -487,7 +487,7 @@ static int hmm_vma_walk_pud(pud_t *pudp,
pud = READ_ONCE(*pudp);
if (pud_none(pud)) {
- ret = hmm_vma_walk_hole(start, end, walk);
+ ret = hmm_vma_walk_hole(start, end, -1, walk);
goto out_unlock;
}
@@ -497,7 +497,7 @@ static int hmm_vma_walk_pud(pud_t *pudp,
bool fault, write_fault;
if (!pud_present(pud)) {
- ret = hmm_vma_walk_hole(start, end, walk);
+ ret = hmm_vma_walk_hole(start, end, -1, walk);
goto out_unlock;
}
--- a/mm/migrate.c~mm-pagewalk-add-depth-parameter-to-pte_hole
+++ a/mm/migrate.c
@@ -2151,6 +2151,7 @@ out_unlock:
#ifdef CONFIG_DEVICE_PRIVATE
static int migrate_vma_collect_hole(unsigned long start,
unsigned long end,
+ __always_unused int depth,
struct mm_walk *walk)
{
struct migrate_vma *migrate = walk->private;
@@ -2195,7 +2196,7 @@ static int migrate_vma_collect_pmd(pmd_t
again:
if (pmd_none(*pmdp))
- return migrate_vma_collect_hole(start, end, walk);
+ return migrate_vma_collect_hole(start, end, -1, walk);
if (pmd_trans_huge(*pmdp)) {
struct page *page;
@@ -2228,7 +2229,7 @@ again:
return migrate_vma_collect_skip(start, end,
walk);
if (pmd_none(*pmdp))
- return migrate_vma_collect_hole(start, end,
+ return migrate_vma_collect_hole(start, end, -1,
walk);
}
}
--- a/mm/mincore.c~mm-pagewalk-add-depth-parameter-to-pte_hole
+++ a/mm/mincore.c
@@ -112,6 +112,7 @@ static int __mincore_unmapped_range(unsi
}
static int mincore_unmapped_range(unsigned long addr, unsigned long end,
+ __always_unused int depth,
struct mm_walk *walk)
{
walk->private += __mincore_unmapped_range(addr, end,
--- a/mm/pagewalk.c~mm-pagewalk-add-depth-parameter-to-pte_hole
+++ a/mm/pagewalk.c
@@ -4,6 +4,22 @@
#include <linux/sched.h>
#include <linux/hugetlb.h>
+/*
+ * We want to know the real level where a entry is located ignoring any
+ * folding of levels which may be happening. For example if p4d is folded then
+ * a missing entry found at level 1 (p4d) is actually at level 0 (pgd).
+ */
+static int real_depth(int depth)
+{
+ if (depth == 3 && PTRS_PER_PMD == 1)
+ depth = 2;
+ if (depth == 2 && PTRS_PER_PUD == 1)
+ depth = 1;
+ if (depth == 1 && PTRS_PER_P4D == 1)
+ depth = 0;
+ return depth;
+}
+
static int walk_pte_range_inner(pte_t *pte, unsigned long addr,
unsigned long end, struct mm_walk *walk)
{
@@ -49,6 +65,7 @@ static int walk_pmd_range(pud_t *pud, un
unsigned long next;
const struct mm_walk_ops *ops = walk->ops;
int err = 0;
+ int depth = real_depth(3);
pmd = pmd_offset(pud, addr);
do {
@@ -56,7 +73,7 @@ again:
next = pmd_addr_end(addr, end);
if (pmd_none(*pmd) || (!walk->vma && !walk->no_vma)) {
if (ops->pte_hole)
- err = ops->pte_hole(addr, next, walk);
+ err = ops->pte_hole(addr, next, depth, walk);
if (err)
break;
continue;
@@ -106,6 +123,7 @@ static int walk_pud_range(p4d_t *p4d, un
unsigned long next;
const struct mm_walk_ops *ops = walk->ops;
int err = 0;
+ int depth = real_depth(2);
pud = pud_offset(p4d, addr);
do {
@@ -113,7 +131,7 @@ static int walk_pud_range(p4d_t *p4d, un
next = pud_addr_end(addr, end);
if (pud_none(*pud) || (!walk->vma && !walk->no_vma)) {
if (ops->pte_hole)
- err = ops->pte_hole(addr, next, walk);
+ err = ops->pte_hole(addr, next, depth, walk);
if (err)
break;
continue;
@@ -154,13 +172,14 @@ static int walk_p4d_range(pgd_t *pgd, un
unsigned long next;
const struct mm_walk_ops *ops = walk->ops;
int err = 0;
+ int depth = real_depth(1);
p4d = p4d_offset(pgd, addr);
do {
next = p4d_addr_end(addr, end);
if (p4d_none_or_clear_bad(p4d)) {
if (ops->pte_hole)
- err = ops->pte_hole(addr, next, walk);
+ err = ops->pte_hole(addr, next, depth, walk);
if (err)
break;
continue;
@@ -192,7 +211,7 @@ static int walk_pgd_range(unsigned long
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd)) {
if (ops->pte_hole)
- err = ops->pte_hole(addr, next, walk);
+ err = ops->pte_hole(addr, next, 0, walk);
if (err)
break;
continue;
@@ -239,7 +258,7 @@ static int walk_hugetlb_range(unsigned l
if (pte)
err = ops->hugetlb_entry(pte, hmask, addr, next, walk);
else if (ops->pte_hole)
- err = ops->pte_hole(addr, next, walk);
+ err = ops->pte_hole(addr, next, -1, walk);
if (err)
break;
@@ -283,7 +302,7 @@ static int walk_page_test(unsigned long
if (vma->vm_flags & VM_PFNMAP) {
int err = 1;
if (ops->pte_hole)
- err = ops->pte_hole(start, end, walk);
+ err = ops->pte_hole(start, end, -1, walk);
return err ? err : 1;
}
return 0;
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 39/67] x86: mm: point to struct seq_file from struct pg_state
2020-02-04 1:33 incoming Andrew Morton
` (37 preceding siblings ...)
2020-02-04 1:36 ` [patch 38/67] mm: pagewalk: add 'depth' parameter to pte_hole Andrew Morton
@ 2020-02-04 1:36 ` Andrew Morton
2020-02-04 1:36 ` [patch 40/67] x86: mm+efi: convert ptdump_walk_pgd_level() to take a mm_struct Andrew Morton
` (30 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:36 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: x86: mm: point to struct seq_file from struct pg_state
mm/dump_pagetables.c passes both struct seq_file and struct pg_state down
the chain of walk_*_level() functions to be passed to note_page().
Instead place the struct seq_file in struct pg_state and access it from
struct pg_state (which is private to this file) in note_page().
Link: http://lkml.kernel.org/r/20191218162402.45610-17-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/x86/mm/dump_pagetables.c | 69 ++++++++++++++++----------------
1 file changed, 35 insertions(+), 34 deletions(-)
--- a/arch/x86/mm/dump_pagetables.c~x86-mm-point-to-struct-seq_file-from-struct-pg_state
+++ a/arch/x86/mm/dump_pagetables.c
@@ -36,6 +36,7 @@ struct pg_state {
bool to_dmesg;
bool check_wx;
unsigned long wx_pages;
+ struct seq_file *seq;
};
struct addr_marker {
@@ -265,11 +266,12 @@ static void note_wx(struct pg_state *st)
* of PTE entries; the next one is different so we need to
* print what we collected so far.
*/
-static void note_page(struct seq_file *m, struct pg_state *st,
- pgprot_t new_prot, pgprotval_t new_eff, int level)
+static void note_page(struct pg_state *st, pgprot_t new_prot,
+ pgprotval_t new_eff, int level)
{
pgprotval_t prot, cur, eff;
static const char units[] = "BKMGTPE";
+ struct seq_file *m = st->seq;
/*
* If we have a "break" in the series, we need to flush the state that
@@ -354,8 +356,8 @@ static inline pgprotval_t effective_prot
((prot1 | prot2) & _PAGE_NX);
}
-static void walk_pte_level(struct seq_file *m, struct pg_state *st, pmd_t addr,
- pgprotval_t eff_in, unsigned long P)
+static void walk_pte_level(struct pg_state *st, pmd_t addr, pgprotval_t eff_in,
+ unsigned long P)
{
int i;
pte_t *pte;
@@ -366,7 +368,7 @@ static void walk_pte_level(struct seq_fi
pte = pte_offset_map(&addr, st->current_address);
prot = pte_flags(*pte);
eff = effective_prot(eff_in, prot);
- note_page(m, st, __pgprot(prot), eff, 5);
+ note_page(st, __pgprot(prot), eff, 5);
pte_unmap(pte);
}
}
@@ -379,22 +381,20 @@ static void walk_pte_level(struct seq_fi
* us dozens of seconds (minutes for 5-level config) while checking for
* W+X mapping or reading kernel_page_tables debugfs file.
*/
-static inline bool kasan_page_table(struct seq_file *m, struct pg_state *st,
- void *pt)
+static inline bool kasan_page_table(struct pg_state *st, void *pt)
{
if (__pa(pt) == __pa(kasan_early_shadow_pmd) ||
(pgtable_l5_enabled() &&
__pa(pt) == __pa(kasan_early_shadow_p4d)) ||
__pa(pt) == __pa(kasan_early_shadow_pud)) {
pgprotval_t prot = pte_flags(kasan_early_shadow_pte[0]);
- note_page(m, st, __pgprot(prot), 0, 5);
+ note_page(st, __pgprot(prot), 0, 5);
return true;
}
return false;
}
#else
-static inline bool kasan_page_table(struct seq_file *m, struct pg_state *st,
- void *pt)
+static inline bool kasan_page_table(struct pg_state *st, void *pt)
{
return false;
}
@@ -402,7 +402,7 @@ static inline bool kasan_page_table(stru
#if PTRS_PER_PMD > 1
-static void walk_pmd_level(struct seq_file *m, struct pg_state *st, pud_t addr,
+static void walk_pmd_level(struct pg_state *st, pud_t addr,
pgprotval_t eff_in, unsigned long P)
{
int i;
@@ -416,27 +416,27 @@ static void walk_pmd_level(struct seq_fi
prot = pmd_flags(*start);
eff = effective_prot(eff_in, prot);
if (pmd_large(*start) || !pmd_present(*start)) {
- note_page(m, st, __pgprot(prot), eff, 4);
- } else if (!kasan_page_table(m, st, pmd_start)) {
- walk_pte_level(m, st, *start, eff,
+ note_page(st, __pgprot(prot), eff, 4);
+ } else if (!kasan_page_table(st, pmd_start)) {
+ walk_pte_level(st, *start, eff,
P + i * PMD_LEVEL_MULT);
}
} else
- note_page(m, st, __pgprot(0), 0, 4);
+ note_page(st, __pgprot(0), 0, 4);
start++;
}
}
#else
-#define walk_pmd_level(m,s,a,e,p) walk_pte_level(m,s,__pmd(pud_val(a)),e,p)
+#define walk_pmd_level(s,a,e,p) walk_pte_level(s,__pmd(pud_val(a)),e,p)
#define pud_large(a) pmd_large(__pmd(pud_val(a)))
#define pud_none(a) pmd_none(__pmd(pud_val(a)))
#endif
#if PTRS_PER_PUD > 1
-static void walk_pud_level(struct seq_file *m, struct pg_state *st, p4d_t addr,
- pgprotval_t eff_in, unsigned long P)
+static void walk_pud_level(struct pg_state *st, p4d_t addr, pgprotval_t eff_in,
+ unsigned long P)
{
int i;
pud_t *start, *pud_start;
@@ -450,33 +450,33 @@ static void walk_pud_level(struct seq_fi
prot = pud_flags(*start);
eff = effective_prot(eff_in, prot);
if (pud_large(*start) || !pud_present(*start)) {
- note_page(m, st, __pgprot(prot), eff, 3);
- } else if (!kasan_page_table(m, st, pud_start)) {
- walk_pmd_level(m, st, *start, eff,
+ note_page(st, __pgprot(prot), eff, 3);
+ } else if (!kasan_page_table(st, pud_start)) {
+ walk_pmd_level(st, *start, eff,
P + i * PUD_LEVEL_MULT);
}
} else
- note_page(m, st, __pgprot(0), 0, 3);
+ note_page(st, __pgprot(0), 0, 3);
start++;
}
}
#else
-#define walk_pud_level(m,s,a,e,p) walk_pmd_level(m,s,__pud(p4d_val(a)),e,p)
+#define walk_pud_level(s,a,e,p) walk_pmd_level(s,__pud(p4d_val(a)),e,p)
#define p4d_large(a) pud_large(__pud(p4d_val(a)))
#define p4d_none(a) pud_none(__pud(p4d_val(a)))
#endif
-static void walk_p4d_level(struct seq_file *m, struct pg_state *st, pgd_t addr,
- pgprotval_t eff_in, unsigned long P)
+static void walk_p4d_level(struct pg_state *st, pgd_t addr, pgprotval_t eff_in,
+ unsigned long P)
{
int i;
p4d_t *start, *p4d_start;
pgprotval_t prot, eff;
if (PTRS_PER_P4D == 1)
- return walk_pud_level(m, st, __p4d(pgd_val(addr)), eff_in, P);
+ return walk_pud_level(st, __p4d(pgd_val(addr)), eff_in, P);
p4d_start = start = (p4d_t *)pgd_page_vaddr(addr);
@@ -486,13 +486,13 @@ static void walk_p4d_level(struct seq_fi
prot = p4d_flags(*start);
eff = effective_prot(eff_in, prot);
if (p4d_large(*start) || !p4d_present(*start)) {
- note_page(m, st, __pgprot(prot), eff, 2);
- } else if (!kasan_page_table(m, st, p4d_start)) {
- walk_pud_level(m, st, *start, eff,
+ note_page(st, __pgprot(prot), eff, 2);
+ } else if (!kasan_page_table(st, p4d_start)) {
+ walk_pud_level(st, *start, eff,
P + i * P4D_LEVEL_MULT);
}
} else
- note_page(m, st, __pgprot(0), 0, 2);
+ note_page(st, __pgprot(0), 0, 2);
start++;
}
@@ -529,6 +529,7 @@ static void ptdump_walk_pgd_level_core(s
}
st.check_wx = checkwx;
+ st.seq = m;
if (checkwx)
st.wx_pages = 0;
@@ -542,13 +543,13 @@ static void ptdump_walk_pgd_level_core(s
eff = prot;
#endif
if (pgd_large(*start) || !pgd_present(*start)) {
- note_page(m, &st, __pgprot(prot), eff, 1);
+ note_page(&st, __pgprot(prot), eff, 1);
} else {
- walk_p4d_level(m, &st, *start, eff,
+ walk_p4d_level(&st, *start, eff,
i * PGD_LEVEL_MULT);
}
} else
- note_page(m, &st, __pgprot(0), 0, 1);
+ note_page(&st, __pgprot(0), 0, 1);
cond_resched();
start++;
@@ -556,7 +557,7 @@ static void ptdump_walk_pgd_level_core(s
/* Flush out the last page */
st.current_address = normalize_addr(PTRS_PER_PGD*PGD_LEVEL_MULT);
- note_page(m, &st, __pgprot(0), 0, 0);
+ note_page(&st, __pgprot(0), 0, 0);
if (!checkwx)
return;
if (st.wx_pages)
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 40/67] x86: mm+efi: convert ptdump_walk_pgd_level() to take a mm_struct
2020-02-04 1:33 incoming Andrew Morton
` (38 preceding siblings ...)
2020-02-04 1:36 ` [patch 39/67] x86: mm: point to struct seq_file from struct pg_state Andrew Morton
@ 2020-02-04 1:36 ` Andrew Morton
2020-02-04 1:36 ` [patch 41/67] x86: mm: convert ptdump_walk_pgd_level_debugfs() to take an mm_struct Andrew Morton
` (29 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:36 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: x86: mm+efi: convert ptdump_walk_pgd_level() to take a mm_struct
To enable x86 to use the generic walk_page_range() function, the callers
of ptdump_walk_pgd_level() need to pass an mm_struct rather than the raw
pgd_t pointer. Luckily since commit 7e904a91bf60 ("efi: Use efi_mm in x86
as well as ARM") we now have an mm_struct for EFI on x86.
Link: http://lkml.kernel.org/r/20191218162402.45610-18-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/x86/include/asm/pgtable.h | 2 +-
arch/x86/mm/dump_pagetables.c | 4 ++--
arch/x86/platform/efi/efi_32.c | 2 +-
arch/x86/platform/efi/efi_64.c | 4 ++--
4 files changed, 6 insertions(+), 6 deletions(-)
--- a/arch/x86/include/asm/pgtable.h~x86-mmefi-convert-ptdump_walk_pgd_level-to-take-a-mm_struct
+++ a/arch/x86/include/asm/pgtable.h
@@ -29,7 +29,7 @@
extern pgd_t early_top_pgt[PTRS_PER_PGD];
int __init __early_make_pgtable(unsigned long address, pmdval_t pmd);
-void ptdump_walk_pgd_level(struct seq_file *m, pgd_t *pgd);
+void ptdump_walk_pgd_level(struct seq_file *m, struct mm_struct *mm);
void ptdump_walk_pgd_level_debugfs(struct seq_file *m, pgd_t *pgd, bool user);
void ptdump_walk_pgd_level_checkwx(void);
void ptdump_walk_user_pgd_level_checkwx(void);
--- a/arch/x86/mm/dump_pagetables.c~x86-mmefi-convert-ptdump_walk_pgd_level-to-take-a-mm_struct
+++ a/arch/x86/mm/dump_pagetables.c
@@ -567,9 +567,9 @@ static void ptdump_walk_pgd_level_core(s
pr_info("x86/mm: Checked W+X mappings: passed, no W+X pages found.\n");
}
-void ptdump_walk_pgd_level(struct seq_file *m, pgd_t *pgd)
+void ptdump_walk_pgd_level(struct seq_file *m, struct mm_struct *mm)
{
- ptdump_walk_pgd_level_core(m, pgd, false, true);
+ ptdump_walk_pgd_level_core(m, mm->pgd, false, true);
}
void ptdump_walk_pgd_level_debugfs(struct seq_file *m, pgd_t *pgd, bool user)
--- a/arch/x86/platform/efi/efi_32.c~x86-mmefi-convert-ptdump_walk_pgd_level-to-take-a-mm_struct
+++ a/arch/x86/platform/efi/efi_32.c
@@ -49,7 +49,7 @@ void efi_sync_low_kernel_mappings(void)
void __init efi_dump_pagetable(void)
{
#ifdef CONFIG_EFI_PGT_DUMP
- ptdump_walk_pgd_level(NULL, swapper_pg_dir);
+ ptdump_walk_pgd_level(NULL, &init_mm);
#endif
}
--- a/arch/x86/platform/efi/efi_64.c~x86-mmefi-convert-ptdump_walk_pgd_level-to-take-a-mm_struct
+++ a/arch/x86/platform/efi/efi_64.c
@@ -471,9 +471,9 @@ void __init efi_dump_pagetable(void)
{
#ifdef CONFIG_EFI_PGT_DUMP
if (efi_have_uv1_memmap())
- ptdump_walk_pgd_level(NULL, swapper_pg_dir);
+ ptdump_walk_pgd_level(NULL, &init_mm);
else
- ptdump_walk_pgd_level(NULL, efi_mm.pgd);
+ ptdump_walk_pgd_level(NULL, &efi_mm);
#endif
}
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 41/67] x86: mm: convert ptdump_walk_pgd_level_debugfs() to take an mm_struct
2020-02-04 1:33 incoming Andrew Morton
` (39 preceding siblings ...)
2020-02-04 1:36 ` [patch 40/67] x86: mm+efi: convert ptdump_walk_pgd_level() to take a mm_struct Andrew Morton
@ 2020-02-04 1:36 ` Andrew Morton
2020-02-04 1:36 ` [patch 42/67] mm: add generic ptdump Andrew Morton
` (28 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:36 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: x86: mm: convert ptdump_walk_pgd_level_debugfs() to take an mm_struct
To enable x86 to use the generic walk_page_range() function, the callers
of ptdump_walk_pgd_level_debugfs() need to pass in the mm_struct.
This means that ptdump_walk_pgd_level_core() is now always passed a valid
pgd, so drop the support for pgd==NULL.
Link: http://lkml.kernel.org/r/20191218162402.45610-19-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/x86/include/asm/pgtable.h | 3 ++-
arch/x86/mm/debug_pagetables.c | 8 ++++----
arch/x86/mm/dump_pagetables.c | 14 ++++++--------
3 files changed, 12 insertions(+), 13 deletions(-)
--- a/arch/x86/include/asm/pgtable.h~x86-mm-convert-ptdump_walk_pgd_level_debugfs-to-take-an-mm_struct
+++ a/arch/x86/include/asm/pgtable.h
@@ -30,7 +30,8 @@ extern pgd_t early_top_pgt[PTRS_PER_PGD]
int __init __early_make_pgtable(unsigned long address, pmdval_t pmd);
void ptdump_walk_pgd_level(struct seq_file *m, struct mm_struct *mm);
-void ptdump_walk_pgd_level_debugfs(struct seq_file *m, pgd_t *pgd, bool user);
+void ptdump_walk_pgd_level_debugfs(struct seq_file *m, struct mm_struct *mm,
+ bool user);
void ptdump_walk_pgd_level_checkwx(void);
void ptdump_walk_user_pgd_level_checkwx(void);
--- a/arch/x86/mm/debug_pagetables.c~x86-mm-convert-ptdump_walk_pgd_level_debugfs-to-take-an-mm_struct
+++ a/arch/x86/mm/debug_pagetables.c
@@ -7,7 +7,7 @@
static int ptdump_show(struct seq_file *m, void *v)
{
- ptdump_walk_pgd_level_debugfs(m, NULL, false);
+ ptdump_walk_pgd_level_debugfs(m, &init_mm, false);
return 0;
}
@@ -17,7 +17,7 @@ static int ptdump_curknl_show(struct seq
{
if (current->mm->pgd) {
down_read(¤t->mm->mmap_sem);
- ptdump_walk_pgd_level_debugfs(m, current->mm->pgd, false);
+ ptdump_walk_pgd_level_debugfs(m, current->mm, false);
up_read(¤t->mm->mmap_sem);
}
return 0;
@@ -30,7 +30,7 @@ static int ptdump_curusr_show(struct seq
{
if (current->mm->pgd) {
down_read(¤t->mm->mmap_sem);
- ptdump_walk_pgd_level_debugfs(m, current->mm->pgd, true);
+ ptdump_walk_pgd_level_debugfs(m, current->mm, true);
up_read(¤t->mm->mmap_sem);
}
return 0;
@@ -43,7 +43,7 @@ DEFINE_SHOW_ATTRIBUTE(ptdump_curusr);
static int ptdump_efi_show(struct seq_file *m, void *v)
{
if (efi_mm.pgd)
- ptdump_walk_pgd_level_debugfs(m, efi_mm.pgd, false);
+ ptdump_walk_pgd_level_debugfs(m, &efi_mm, false);
return 0;
}
--- a/arch/x86/mm/dump_pagetables.c~x86-mm-convert-ptdump_walk_pgd_level_debugfs-to-take-an-mm_struct
+++ a/arch/x86/mm/dump_pagetables.c
@@ -518,16 +518,12 @@ static inline bool is_hypervisor_range(i
static void ptdump_walk_pgd_level_core(struct seq_file *m, pgd_t *pgd,
bool checkwx, bool dmesg)
{
- pgd_t *start = INIT_PGD;
+ pgd_t *start = pgd;
pgprotval_t prot, eff;
int i;
struct pg_state st = {};
- if (pgd) {
- start = pgd;
- st.to_dmesg = dmesg;
- }
-
+ st.to_dmesg = dmesg;
st.check_wx = checkwx;
st.seq = m;
if (checkwx)
@@ -572,8 +568,10 @@ void ptdump_walk_pgd_level(struct seq_fi
ptdump_walk_pgd_level_core(m, mm->pgd, false, true);
}
-void ptdump_walk_pgd_level_debugfs(struct seq_file *m, pgd_t *pgd, bool user)
+void ptdump_walk_pgd_level_debugfs(struct seq_file *m, struct mm_struct *mm,
+ bool user)
{
+ pgd_t *pgd = mm->pgd;
#ifdef CONFIG_PAGE_TABLE_ISOLATION
if (user && boot_cpu_has(X86_FEATURE_PTI))
pgd = kernel_to_user_pgdp(pgd);
@@ -599,7 +597,7 @@ void ptdump_walk_user_pgd_level_checkwx(
void ptdump_walk_pgd_level_checkwx(void)
{
- ptdump_walk_pgd_level_core(NULL, NULL, true, false);
+ ptdump_walk_pgd_level_core(NULL, INIT_PGD, true, false);
}
static int __init pt_dump_init(void)
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 42/67] mm: add generic ptdump
2020-02-04 1:33 incoming Andrew Morton
` (40 preceding siblings ...)
2020-02-04 1:36 ` [patch 41/67] x86: mm: convert ptdump_walk_pgd_level_debugfs() to take an mm_struct Andrew Morton
@ 2020-02-04 1:36 ` Andrew Morton
2020-02-04 1:36 ` [patch 43/67] x86: mm: convert dump_pagetables to use walk_page_range Andrew Morton
` (27 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:36 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: mm: add generic ptdump
Add a generic version of page table dumping that architectures can opt-in
to.
Link: http://lkml.kernel.org/r/20191218162402.45610-20-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/linux/ptdump.h | 21 +++++
mm/Kconfig.debug | 21 +++++
mm/Makefile | 1
mm/ptdump.c | 139 +++++++++++++++++++++++++++++++++++++++
4 files changed, 182 insertions(+)
--- /dev/null
+++ a/include/linux/ptdump.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _LINUX_PTDUMP_H
+#define _LINUX_PTDUMP_H
+
+#include <linux/mm_types.h>
+
+struct ptdump_range {
+ unsigned long start;
+ unsigned long end;
+};
+
+struct ptdump_state {
+ void (*note_page)(struct ptdump_state *st, unsigned long addr,
+ int level, unsigned long val);
+ const struct ptdump_range *range;
+};
+
+void ptdump_walk_pgd(struct ptdump_state *st, struct mm_struct *mm);
+
+#endif /* _LINUX_PTDUMP_H */
--- a/mm/Kconfig.debug~mm-add-generic-ptdump
+++ a/mm/Kconfig.debug
@@ -117,3 +117,24 @@ config DEBUG_RODATA_TEST
depends on STRICT_KERNEL_RWX
---help---
This option enables a testcase for the setting rodata read-only.
+
+config GENERIC_PTDUMP
+ bool
+
+config PTDUMP_CORE
+ bool
+
+config PTDUMP_DEBUGFS
+ bool "Export kernel pagetable layout to userspace via debugfs"
+ depends on DEBUG_KERNEL
+ depends on DEBUG_FS
+ depends on GENERIC_PTDUMP
+ select PTDUMP_CORE
+ help
+ Say Y here if you want to show the kernel pagetable layout in a
+ debugfs file. This information is only useful for kernel developers
+ who are working in architecture specific areas of the kernel.
+ It is probably not a good idea to enable this feature in a production
+ kernel.
+
+ If in doubt, say N.
--- a/mm/Makefile~mm-add-generic-ptdump
+++ a/mm/Makefile
@@ -109,3 +109,4 @@ obj-$(CONFIG_ZONE_DEVICE) += memremap.o
obj-$(CONFIG_HMM_MIRROR) += hmm.o
obj-$(CONFIG_MEMFD_CREATE) += memfd.o
obj-$(CONFIG_MAPPING_DIRTY_HELPERS) += mapping_dirty_helpers.o
+obj-$(CONFIG_PTDUMP_CORE) += ptdump.o
--- /dev/null
+++ a/mm/ptdump.c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/pagewalk.h>
+#include <linux/ptdump.h>
+#include <linux/kasan.h>
+
+#ifdef CONFIG_KASAN
+/*
+ * This is an optimization for KASAN=y case. Since all kasan page tables
+ * eventually point to the kasan_early_shadow_page we could call note_page()
+ * right away without walking through lower level page tables. This saves
+ * us dozens of seconds (minutes for 5-level config) while checking for
+ * W+X mapping or reading kernel_page_tables debugfs file.
+ */
+static inline int note_kasan_page_table(struct mm_walk *walk,
+ unsigned long addr)
+{
+ struct ptdump_state *st = walk->private;
+
+ st->note_page(st, addr, 5, pte_val(kasan_early_shadow_pte[0]));
+
+ walk->action = ACTION_CONTINUE;
+
+ return 0;
+}
+#endif
+
+static int ptdump_pgd_entry(pgd_t *pgd, unsigned long addr,
+ unsigned long next, struct mm_walk *walk)
+{
+ struct ptdump_state *st = walk->private;
+ pgd_t val = READ_ONCE(*pgd);
+
+#if CONFIG_PGTABLE_LEVELS > 4 && defined(CONFIG_KASAN)
+ if (pgd_page(val) == virt_to_page(lm_alias(kasan_early_shadow_p4d)))
+ return note_kasan_page_table(walk, addr);
+#endif
+
+ if (pgd_leaf(val))
+ st->note_page(st, addr, 1, pgd_val(val));
+
+ return 0;
+}
+
+static int ptdump_p4d_entry(p4d_t *p4d, unsigned long addr,
+ unsigned long next, struct mm_walk *walk)
+{
+ struct ptdump_state *st = walk->private;
+ p4d_t val = READ_ONCE(*p4d);
+
+#if CONFIG_PGTABLE_LEVELS > 3 && defined(CONFIG_KASAN)
+ if (p4d_page(val) == virt_to_page(lm_alias(kasan_early_shadow_pud)))
+ return note_kasan_page_table(walk, addr);
+#endif
+
+ if (p4d_leaf(val))
+ st->note_page(st, addr, 2, p4d_val(val));
+
+ return 0;
+}
+
+static int ptdump_pud_entry(pud_t *pud, unsigned long addr,
+ unsigned long next, struct mm_walk *walk)
+{
+ struct ptdump_state *st = walk->private;
+ pud_t val = READ_ONCE(*pud);
+
+#if CONFIG_PGTABLE_LEVELS > 2 && defined(CONFIG_KASAN)
+ if (pud_page(val) == virt_to_page(lm_alias(kasan_early_shadow_pmd)))
+ return note_kasan_page_table(walk, addr);
+#endif
+
+ if (pud_leaf(val))
+ st->note_page(st, addr, 3, pud_val(val));
+
+ return 0;
+}
+
+static int ptdump_pmd_entry(pmd_t *pmd, unsigned long addr,
+ unsigned long next, struct mm_walk *walk)
+{
+ struct ptdump_state *st = walk->private;
+ pmd_t val = READ_ONCE(*pmd);
+
+#if defined(CONFIG_KASAN)
+ if (pmd_page(val) == virt_to_page(lm_alias(kasan_early_shadow_pte)))
+ return note_kasan_page_table(walk, addr);
+#endif
+
+ if (pmd_leaf(val))
+ st->note_page(st, addr, 4, pmd_val(val));
+
+ return 0;
+}
+
+static int ptdump_pte_entry(pte_t *pte, unsigned long addr,
+ unsigned long next, struct mm_walk *walk)
+{
+ struct ptdump_state *st = walk->private;
+
+ st->note_page(st, addr, 5, pte_val(READ_ONCE(*pte)));
+
+ return 0;
+}
+
+static int ptdump_hole(unsigned long addr, unsigned long next,
+ int depth, struct mm_walk *walk)
+{
+ struct ptdump_state *st = walk->private;
+
+ st->note_page(st, addr, depth + 1, 0);
+
+ return 0;
+}
+
+static const struct mm_walk_ops ptdump_ops = {
+ .pgd_entry = ptdump_pgd_entry,
+ .p4d_entry = ptdump_p4d_entry,
+ .pud_entry = ptdump_pud_entry,
+ .pmd_entry = ptdump_pmd_entry,
+ .pte_entry = ptdump_pte_entry,
+ .pte_hole = ptdump_hole,
+};
+
+void ptdump_walk_pgd(struct ptdump_state *st, struct mm_struct *mm)
+{
+ const struct ptdump_range *range = st->range;
+
+ down_read(&mm->mmap_sem);
+ while (range->start != range->end) {
+ walk_page_range_novma(mm, range->start, range->end,
+ &ptdump_ops, st);
+ range++;
+ }
+ up_read(&mm->mmap_sem);
+
+ /* Flush out the last page */
+ st->note_page(st, 0, 0, 0);
+}
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 43/67] x86: mm: convert dump_pagetables to use walk_page_range
2020-02-04 1:33 incoming Andrew Morton
` (41 preceding siblings ...)
2020-02-04 1:36 ` [patch 42/67] mm: add generic ptdump Andrew Morton
@ 2020-02-04 1:36 ` Andrew Morton
2020-02-04 1:36 ` [patch 44/67] arm64: mm: convert mm/dump.c to use walk_page_range() Andrew Morton
` (26 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:36 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: x86: mm: convert dump_pagetables to use walk_page_range
Make use of the new functionality in walk_page_range to remove the arch
page walking code and use the generic code to walk the page tables.
The effective permissions are passed down the chain using new fields in
struct pg_state.
The KASAN optimisation is implemented by setting action=CONTINUE in the
callbacks to skip an entire tree of entries.
Link: http://lkml.kernel.org/r/20191218162402.45610-21-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/x86/Kconfig | 1
arch/x86/Kconfig.debug | 20 --
arch/x86/mm/Makefile | 4
arch/x86/mm/dump_pagetables.c | 294 +++++++-------------------------
4 files changed, 71 insertions(+), 248 deletions(-)
--- a/arch/x86/Kconfig~x86-mm-convert-dump_pagetables-to-use-walk_page_range
+++ a/arch/x86/Kconfig
@@ -120,6 +120,7 @@ config X86
select GENERIC_IRQ_RESERVATION_MODE
select GENERIC_IRQ_SHOW
select GENERIC_PENDING_IRQ if SMP
+ select GENERIC_PTDUMP
select GENERIC_SMP_IDLE_THREAD
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
--- a/arch/x86/Kconfig.debug~x86-mm-convert-dump_pagetables-to-use-walk_page_range
+++ a/arch/x86/Kconfig.debug
@@ -62,26 +62,10 @@ config EARLY_PRINTK_USB_XDBC
config MCSAFE_TEST
def_bool n
-config X86_PTDUMP_CORE
- def_bool n
-
-config X86_PTDUMP
- tristate "Export kernel pagetable layout to userspace via debugfs"
- depends on DEBUG_KERNEL
- select DEBUG_FS
- select X86_PTDUMP_CORE
- ---help---
- Say Y here if you want to show the kernel pagetable layout in a
- debugfs file. This information is only useful for kernel developers
- who are working in architecture specific areas of the kernel.
- It is probably not a good idea to enable this feature in a production
- kernel.
- If in doubt, say "N"
-
config EFI_PGT_DUMP
bool "Dump the EFI pagetable"
depends on EFI
- select X86_PTDUMP_CORE
+ select PTDUMP_CORE
---help---
Enable this if you want to dump the EFI page table before
enabling virtual mode. This can be used to debug miscellaneous
@@ -90,7 +74,7 @@ config EFI_PGT_DUMP
config DEBUG_WX
bool "Warn on W+X mappings at boot"
- select X86_PTDUMP_CORE
+ select PTDUMP_CORE
---help---
Generate a warning if any W+X mappings are found at boot.
--- a/arch/x86/mm/dump_pagetables.c~x86-mm-convert-dump_pagetables-to-use-walk_page_range
+++ a/arch/x86/mm/dump_pagetables.c
@@ -16,6 +16,7 @@
#include <linux/seq_file.h>
#include <linux/highmem.h>
#include <linux/pci.h>
+#include <linux/ptdump.h>
#include <asm/e820/types.h>
#include <asm/pgtable.h>
@@ -26,11 +27,12 @@
* when a "break" in the continuity is found.
*/
struct pg_state {
+ struct ptdump_state ptdump;
int level;
- pgprot_t current_prot;
+ pgprotval_t current_prot;
pgprotval_t effective_prot;
+ pgprotval_t prot_levels[5];
unsigned long start_address;
- unsigned long current_address;
const struct addr_marker *marker;
unsigned long lines;
bool to_dmesg;
@@ -175,9 +177,8 @@ static struct addr_marker address_marker
/*
* Print a readable form of a pgprot_t to the seq_file
*/
-static void printk_prot(struct seq_file *m, pgprot_t prot, int level, bool dmsg)
+static void printk_prot(struct seq_file *m, pgprotval_t pr, int level, bool dmsg)
{
- pgprotval_t pr = pgprot_val(prot);
static const char * const level_name[] =
{ "cr3", "pgd", "p4d", "pud", "pmd", "pte" };
@@ -224,24 +225,11 @@ static void printk_prot(struct seq_file
pt_dump_cont_printf(m, dmsg, "%s\n", level_name[level]);
}
-/*
- * On 64 bits, sign-extend the 48 bit address to 64 bit
- */
-static unsigned long normalize_addr(unsigned long u)
-{
- int shift;
- if (!IS_ENABLED(CONFIG_X86_64))
- return u;
-
- shift = 64 - (__VIRTUAL_MASK_SHIFT + 1);
- return (signed long)(u << shift) >> shift;
-}
-
-static void note_wx(struct pg_state *st)
+static void note_wx(struct pg_state *st, unsigned long addr)
{
unsigned long npages;
- npages = (st->current_address - st->start_address) / PAGE_SIZE;
+ npages = (addr - st->start_address) / PAGE_SIZE;
#ifdef CONFIG_PCI_BIOS
/*
@@ -249,7 +237,7 @@ static void note_wx(struct pg_state *st)
* Inform about it, but avoid the warning.
*/
if (pcibios_enabled && st->start_address >= PAGE_OFFSET + BIOS_BEGIN &&
- st->current_address <= PAGE_OFFSET + BIOS_END) {
+ addr <= PAGE_OFFSET + BIOS_END) {
pr_warn_once("x86/mm: PCI BIOS W+X mapping %lu pages\n", npages);
return;
}
@@ -261,25 +249,44 @@ static void note_wx(struct pg_state *st)
(void *)st->start_address);
}
+static inline pgprotval_t effective_prot(pgprotval_t prot1, pgprotval_t prot2)
+{
+ return (prot1 & prot2 & (_PAGE_USER | _PAGE_RW)) |
+ ((prot1 | prot2) & _PAGE_NX);
+}
+
/*
* This function gets called on a break in a continuous series
* of PTE entries; the next one is different so we need to
* print what we collected so far.
*/
-static void note_page(struct pg_state *st, pgprot_t new_prot,
- pgprotval_t new_eff, int level)
+static void note_page(struct ptdump_state *pt_st, unsigned long addr, int level,
+ unsigned long val)
{
- pgprotval_t prot, cur, eff;
+ struct pg_state *st = container_of(pt_st, struct pg_state, ptdump);
+ pgprotval_t new_prot, new_eff;
+ pgprotval_t cur, eff;
static const char units[] = "BKMGTPE";
struct seq_file *m = st->seq;
+ new_prot = val & PTE_FLAGS_MASK;
+
+ if (level > 1) {
+ new_eff = effective_prot(st->prot_levels[level - 2],
+ new_prot);
+ } else {
+ new_eff = new_prot;
+ }
+
+ if (level > 0)
+ st->prot_levels[level - 1] = new_eff;
+
/*
* If we have a "break" in the series, we need to flush the state that
* we have now. "break" is either changing perms, levels or
* address space marker.
*/
- prot = pgprot_val(new_prot);
- cur = pgprot_val(st->current_prot);
+ cur = st->current_prot;
eff = st->effective_prot;
if (!st->level) {
@@ -291,14 +298,14 @@ static void note_page(struct pg_state *s
st->lines = 0;
pt_dump_seq_printf(m, st->to_dmesg, "---[ %s ]---\n",
st->marker->name);
- } else if (prot != cur || new_eff != eff || level != st->level ||
- st->current_address >= st->marker[1].start_address) {
+ } else if (new_prot != cur || new_eff != eff || level != st->level ||
+ addr >= st->marker[1].start_address) {
const char *unit = units;
unsigned long delta;
int width = sizeof(unsigned long) * 2;
if (st->check_wx && (eff & _PAGE_RW) && !(eff & _PAGE_NX))
- note_wx(st);
+ note_wx(st, addr);
/*
* Now print the actual finished series
@@ -308,9 +315,9 @@ static void note_page(struct pg_state *s
pt_dump_seq_printf(m, st->to_dmesg,
"0x%0*lx-0x%0*lx ",
width, st->start_address,
- width, st->current_address);
+ width, addr);
- delta = st->current_address - st->start_address;
+ delta = addr - st->start_address;
while (!(delta & 1023) && unit[1]) {
delta >>= 10;
unit++;
@@ -327,7 +334,7 @@ static void note_page(struct pg_state *s
* such as the start of vmalloc space etc.
* This helps in the interpretation.
*/
- if (st->current_address >= st->marker[1].start_address) {
+ if (addr >= st->marker[1].start_address) {
if (st->marker->max_lines &&
st->lines > st->marker->max_lines) {
unsigned long nskip =
@@ -343,217 +350,48 @@ static void note_page(struct pg_state *s
st->marker->name);
}
- st->start_address = st->current_address;
+ st->start_address = addr;
st->current_prot = new_prot;
st->effective_prot = new_eff;
st->level = level;
}
}
-static inline pgprotval_t effective_prot(pgprotval_t prot1, pgprotval_t prot2)
-{
- return (prot1 & prot2 & (_PAGE_USER | _PAGE_RW)) |
- ((prot1 | prot2) & _PAGE_NX);
-}
-
-static void walk_pte_level(struct pg_state *st, pmd_t addr, pgprotval_t eff_in,
- unsigned long P)
-{
- int i;
- pte_t *pte;
- pgprotval_t prot, eff;
-
- for (i = 0; i < PTRS_PER_PTE; i++) {
- st->current_address = normalize_addr(P + i * PTE_LEVEL_MULT);
- pte = pte_offset_map(&addr, st->current_address);
- prot = pte_flags(*pte);
- eff = effective_prot(eff_in, prot);
- note_page(st, __pgprot(prot), eff, 5);
- pte_unmap(pte);
- }
-}
-#ifdef CONFIG_KASAN
-
-/*
- * This is an optimization for KASAN=y case. Since all kasan page tables
- * eventually point to the kasan_early_shadow_page we could call note_page()
- * right away without walking through lower level page tables. This saves
- * us dozens of seconds (minutes for 5-level config) while checking for
- * W+X mapping or reading kernel_page_tables debugfs file.
- */
-static inline bool kasan_page_table(struct pg_state *st, void *pt)
-{
- if (__pa(pt) == __pa(kasan_early_shadow_pmd) ||
- (pgtable_l5_enabled() &&
- __pa(pt) == __pa(kasan_early_shadow_p4d)) ||
- __pa(pt) == __pa(kasan_early_shadow_pud)) {
- pgprotval_t prot = pte_flags(kasan_early_shadow_pte[0]);
- note_page(st, __pgprot(prot), 0, 5);
- return true;
- }
- return false;
-}
-#else
-static inline bool kasan_page_table(struct pg_state *st, void *pt)
-{
- return false;
-}
-#endif
-
-#if PTRS_PER_PMD > 1
-
-static void walk_pmd_level(struct pg_state *st, pud_t addr,
- pgprotval_t eff_in, unsigned long P)
-{
- int i;
- pmd_t *start, *pmd_start;
- pgprotval_t prot, eff;
-
- pmd_start = start = (pmd_t *)pud_page_vaddr(addr);
- for (i = 0; i < PTRS_PER_PMD; i++) {
- st->current_address = normalize_addr(P + i * PMD_LEVEL_MULT);
- if (!pmd_none(*start)) {
- prot = pmd_flags(*start);
- eff = effective_prot(eff_in, prot);
- if (pmd_large(*start) || !pmd_present(*start)) {
- note_page(st, __pgprot(prot), eff, 4);
- } else if (!kasan_page_table(st, pmd_start)) {
- walk_pte_level(st, *start, eff,
- P + i * PMD_LEVEL_MULT);
- }
- } else
- note_page(st, __pgprot(0), 0, 4);
- start++;
- }
-}
-
-#else
-#define walk_pmd_level(s,a,e,p) walk_pte_level(s,__pmd(pud_val(a)),e,p)
-#define pud_large(a) pmd_large(__pmd(pud_val(a)))
-#define pud_none(a) pmd_none(__pmd(pud_val(a)))
-#endif
-
-#if PTRS_PER_PUD > 1
-
-static void walk_pud_level(struct pg_state *st, p4d_t addr, pgprotval_t eff_in,
- unsigned long P)
-{
- int i;
- pud_t *start, *pud_start;
- pgprotval_t prot, eff;
-
- pud_start = start = (pud_t *)p4d_page_vaddr(addr);
-
- for (i = 0; i < PTRS_PER_PUD; i++) {
- st->current_address = normalize_addr(P + i * PUD_LEVEL_MULT);
- if (!pud_none(*start)) {
- prot = pud_flags(*start);
- eff = effective_prot(eff_in, prot);
- if (pud_large(*start) || !pud_present(*start)) {
- note_page(st, __pgprot(prot), eff, 3);
- } else if (!kasan_page_table(st, pud_start)) {
- walk_pmd_level(st, *start, eff,
- P + i * PUD_LEVEL_MULT);
- }
- } else
- note_page(st, __pgprot(0), 0, 3);
-
- start++;
- }
-}
-
-#else
-#define walk_pud_level(s,a,e,p) walk_pmd_level(s,__pud(p4d_val(a)),e,p)
-#define p4d_large(a) pud_large(__pud(p4d_val(a)))
-#define p4d_none(a) pud_none(__pud(p4d_val(a)))
-#endif
-
-static void walk_p4d_level(struct pg_state *st, pgd_t addr, pgprotval_t eff_in,
- unsigned long P)
+static void ptdump_walk_pgd_level_core(struct seq_file *m, pgd_t *pgd,
+ bool checkwx, bool dmesg)
{
- int i;
- p4d_t *start, *p4d_start;
- pgprotval_t prot, eff;
-
- if (PTRS_PER_P4D == 1)
- return walk_pud_level(st, __p4d(pgd_val(addr)), eff_in, P);
-
- p4d_start = start = (p4d_t *)pgd_page_vaddr(addr);
-
- for (i = 0; i < PTRS_PER_P4D; i++) {
- st->current_address = normalize_addr(P + i * P4D_LEVEL_MULT);
- if (!p4d_none(*start)) {
- prot = p4d_flags(*start);
- eff = effective_prot(eff_in, prot);
- if (p4d_large(*start) || !p4d_present(*start)) {
- note_page(st, __pgprot(prot), eff, 2);
- } else if (!kasan_page_table(st, p4d_start)) {
- walk_pud_level(st, *start, eff,
- P + i * P4D_LEVEL_MULT);
- }
- } else
- note_page(st, __pgprot(0), 0, 2);
-
- start++;
- }
-}
+ const struct ptdump_range ptdump_ranges[] = {
+#ifdef CONFIG_X86_64
-#define pgd_large(a) (pgtable_l5_enabled() ? pgd_large(a) : p4d_large(__p4d(pgd_val(a))))
-#define pgd_none(a) (pgtable_l5_enabled() ? pgd_none(a) : p4d_none(__p4d(pgd_val(a))))
+#define normalize_addr_shift (64 - (__VIRTUAL_MASK_SHIFT + 1))
+#define normalize_addr(u) ((signed long)((u) << normalize_addr_shift) >> \
+ normalize_addr_shift)
-static inline bool is_hypervisor_range(int idx)
-{
-#ifdef CONFIG_X86_64
- /*
- * A hole in the beginning of kernel address space reserved
- * for a hypervisor.
- */
- return (idx >= pgd_index(GUARD_HOLE_BASE_ADDR)) &&
- (idx < pgd_index(GUARD_HOLE_END_ADDR));
+ {0, PTRS_PER_PGD * PGD_LEVEL_MULT / 2},
+ {normalize_addr(PTRS_PER_PGD * PGD_LEVEL_MULT / 2), ~0UL},
#else
- return false;
+ {0, ~0UL},
#endif
-}
+ {0, 0}
+};
-static void ptdump_walk_pgd_level_core(struct seq_file *m, pgd_t *pgd,
- bool checkwx, bool dmesg)
-{
- pgd_t *start = pgd;
- pgprotval_t prot, eff;
- int i;
- struct pg_state st = {};
-
- st.to_dmesg = dmesg;
- st.check_wx = checkwx;
- st.seq = m;
- if (checkwx)
- st.wx_pages = 0;
-
- for (i = 0; i < PTRS_PER_PGD; i++) {
- st.current_address = normalize_addr(i * PGD_LEVEL_MULT);
- if (!pgd_none(*start) && !is_hypervisor_range(i)) {
- prot = pgd_flags(*start);
-#ifdef CONFIG_X86_PAE
- eff = _PAGE_USER | _PAGE_RW;
-#else
- eff = prot;
-#endif
- if (pgd_large(*start) || !pgd_present(*start)) {
- note_page(&st, __pgprot(prot), eff, 1);
- } else {
- walk_p4d_level(&st, *start, eff,
- i * PGD_LEVEL_MULT);
- }
- } else
- note_page(&st, __pgprot(0), 0, 1);
+ struct pg_state st = {
+ .ptdump = {
+ .note_page = note_page,
+ .range = ptdump_ranges
+ },
+ .to_dmesg = dmesg,
+ .check_wx = checkwx,
+ .seq = m
+ };
+
+ struct mm_struct fake_mm = {
+ .pgd = pgd
+ };
+ init_rwsem(&fake_mm.mmap_sem);
- cond_resched();
- start++;
- }
+ ptdump_walk_pgd(&st.ptdump, &fake_mm);
- /* Flush out the last page */
- st.current_address = normalize_addr(PTRS_PER_PGD*PGD_LEVEL_MULT);
- note_page(&st, __pgprot(0), 0, 0);
if (!checkwx)
return;
if (st.wx_pages)
--- a/arch/x86/mm/Makefile~x86-mm-convert-dump_pagetables-to-use-walk_page_range
+++ a/arch/x86/mm/Makefile
@@ -28,8 +28,8 @@ CFLAGS_fault.o := -I $(srctree)/$(src)/.
obj-$(CONFIG_X86_32) += pgtable_32.o iomap_32.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_X86_PTDUMP_CORE) += dump_pagetables.o
-obj-$(CONFIG_X86_PTDUMP) += debug_pagetables.o
+obj-$(CONFIG_PTDUMP_CORE) += dump_pagetables.o
+obj-$(CONFIG_PTDUMP_DEBUGFS) += debug_pagetables.o
obj-$(CONFIG_HIGHMEM) += highmem_32.o
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 44/67] arm64: mm: convert mm/dump.c to use walk_page_range()
2020-02-04 1:33 incoming Andrew Morton
` (42 preceding siblings ...)
2020-02-04 1:36 ` [patch 43/67] x86: mm: convert dump_pagetables to use walk_page_range Andrew Morton
@ 2020-02-04 1:36 ` Andrew Morton
2020-02-04 1:36 ` [patch 45/67] arm64: mm: display non-present entries in ptdump Andrew Morton
` (25 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:36 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: arm64: mm: convert mm/dump.c to use walk_page_range()
Now walk_page_range() can walk kernel page tables, we can switch the arm64
ptdump code over to using it, simplifying the code.
Link: http://lkml.kernel.org/r/20191218162402.45610-22-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/arm64/Kconfig | 1
arch/arm64/Kconfig.debug | 19 ----
arch/arm64/include/asm/ptdump.h | 8 -
arch/arm64/mm/Makefile | 4
arch/arm64/mm/dump.c | 117 ++++++++-------------------
arch/arm64/mm/mmu.c | 4
arch/arm64/mm/ptdump_debugfs.c | 2
drivers/firmware/efi/arm-runtime.c | 2
8 files changed, 50 insertions(+), 107 deletions(-)
--- a/arch/arm64/include/asm/ptdump.h~arm64-mm-convert-mm-dumpc-to-use-walk_page_range
+++ a/arch/arm64/include/asm/ptdump.h
@@ -5,7 +5,7 @@
#ifndef __ASM_PTDUMP_H
#define __ASM_PTDUMP_H
-#ifdef CONFIG_ARM64_PTDUMP_CORE
+#ifdef CONFIG_PTDUMP_CORE
#include <linux/mm_types.h>
#include <linux/seq_file.h>
@@ -21,15 +21,15 @@ struct ptdump_info {
unsigned long base_addr;
};
-void ptdump_walk_pgd(struct seq_file *s, struct ptdump_info *info);
-#ifdef CONFIG_ARM64_PTDUMP_DEBUGFS
+void ptdump_walk(struct seq_file *s, struct ptdump_info *info);
+#ifdef CONFIG_PTDUMP_DEBUGFS
void ptdump_debugfs_register(struct ptdump_info *info, const char *name);
#else
static inline void ptdump_debugfs_register(struct ptdump_info *info,
const char *name) { }
#endif
void ptdump_check_wx(void);
-#endif /* CONFIG_ARM64_PTDUMP_CORE */
+#endif /* CONFIG_PTDUMP_CORE */
#ifdef CONFIG_DEBUG_WX
#define debug_checkwx() ptdump_check_wx()
--- a/arch/arm64/Kconfig~arm64-mm-convert-mm-dumpc-to-use-walk_page_range
+++ a/arch/arm64/Kconfig
@@ -104,6 +104,7 @@ config ARM64
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL
select GENERIC_PCI_IOMAP
+ select GENERIC_PTDUMP
select GENERIC_SCHED_CLOCK
select GENERIC_SMP_IDLE_THREAD
select GENERIC_STRNCPY_FROM_USER
--- a/arch/arm64/Kconfig.debug~arm64-mm-convert-mm-dumpc-to-use-walk_page_range
+++ a/arch/arm64/Kconfig.debug
@@ -1,22 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
-config ARM64_PTDUMP_CORE
- def_bool n
-
-config ARM64_PTDUMP_DEBUGFS
- bool "Export kernel pagetable layout to userspace via debugfs"
- depends on DEBUG_KERNEL
- select ARM64_PTDUMP_CORE
- select DEBUG_FS
- help
- Say Y here if you want to show the kernel pagetable layout in a
- debugfs file. This information is only useful for kernel developers
- who are working in architecture specific areas of the kernel.
- It is probably not a good idea to enable this feature in a production
- kernel.
-
- If in doubt, say N.
-
config PID_IN_CONTEXTIDR
bool "Write the current PID to the CONTEXTIDR register"
help
@@ -42,7 +25,7 @@ config ARM64_RANDOMIZE_TEXT_OFFSET
config DEBUG_WX
bool "Warn on W+X mappings at boot"
- select ARM64_PTDUMP_CORE
+ select PTDUMP_CORE
---help---
Generate a warning if any W+X mappings are found at boot.
--- a/arch/arm64/mm/dump.c~arm64-mm-convert-mm-dumpc-to-use-walk_page_range
+++ a/arch/arm64/mm/dump.c
@@ -15,6 +15,7 @@
#include <linux/io.h>
#include <linux/init.h>
#include <linux/mm.h>
+#include <linux/ptdump.h>
#include <linux/sched.h>
#include <linux/seq_file.h>
@@ -75,10 +76,11 @@ static struct addr_marker address_marker
* dumps out a description of the range.
*/
struct pg_state {
+ struct ptdump_state ptdump;
struct seq_file *seq;
const struct addr_marker *marker;
unsigned long start_address;
- unsigned level;
+ int level;
u64 current_prot;
bool check_wx;
unsigned long wx_pages;
@@ -179,6 +181,10 @@ static struct pg_level pg_level[] = {
.name = "PGD",
.bits = pte_bits,
.num = ARRAY_SIZE(pte_bits),
+ }, { /* p4d */
+ .name = "P4D",
+ .bits = pte_bits,
+ .num = ARRAY_SIZE(pte_bits),
}, { /* pud */
.name = (CONFIG_PGTABLE_LEVELS > 3) ? "PUD" : "PGD",
.bits = pte_bits,
@@ -241,11 +247,15 @@ static void note_prot_wx(struct pg_state
st->wx_pages += (addr - st->start_address) / PAGE_SIZE;
}
-static void note_page(struct pg_state *st, unsigned long addr, unsigned level,
- u64 val)
+static void note_page(struct ptdump_state *pt_st, unsigned long addr, int level,
+ unsigned long val)
{
+ struct pg_state *st = container_of(pt_st, struct pg_state, ptdump);
static const char units[] = "KMGTPE";
- u64 prot = val & pg_level[level].mask;
+ u64 prot = 0;
+
+ if (level >= 0)
+ prot = val & pg_level[level].mask;
if (!st->level) {
st->level = level;
@@ -293,85 +303,27 @@ static void note_page(struct pg_state *s
}
-static void walk_pte(struct pg_state *st, pmd_t *pmdp, unsigned long start,
- unsigned long end)
-{
- unsigned long addr = start;
- pte_t *ptep = pte_offset_kernel(pmdp, start);
-
- do {
- note_page(st, addr, 4, READ_ONCE(pte_val(*ptep)));
- } while (ptep++, addr += PAGE_SIZE, addr != end);
-}
-
-static void walk_pmd(struct pg_state *st, pud_t *pudp, unsigned long start,
- unsigned long end)
+void ptdump_walk(struct seq_file *s, struct ptdump_info *info)
{
- unsigned long next, addr = start;
- pmd_t *pmdp = pmd_offset(pudp, start);
-
- do {
- pmd_t pmd = READ_ONCE(*pmdp);
- next = pmd_addr_end(addr, end);
-
- if (pmd_none(pmd) || pmd_sect(pmd)) {
- note_page(st, addr, 3, pmd_val(pmd));
- } else {
- BUG_ON(pmd_bad(pmd));
- walk_pte(st, pmdp, addr, next);
- }
- } while (pmdp++, addr = next, addr != end);
-}
-
-static void walk_pud(struct pg_state *st, pgd_t *pgdp, unsigned long start,
- unsigned long end)
-{
- unsigned long next, addr = start;
- pud_t *pudp = pud_offset(pgdp, start);
-
- do {
- pud_t pud = READ_ONCE(*pudp);
- next = pud_addr_end(addr, end);
-
- if (pud_none(pud) || pud_sect(pud)) {
- note_page(st, addr, 2, pud_val(pud));
- } else {
- BUG_ON(pud_bad(pud));
- walk_pmd(st, pudp, addr, next);
- }
- } while (pudp++, addr = next, addr != end);
-}
+ unsigned long end = ~0UL;
+ struct pg_state st;
-static void walk_pgd(struct pg_state *st, struct mm_struct *mm,
- unsigned long start)
-{
- unsigned long end = (start < TASK_SIZE_64) ? TASK_SIZE_64 : 0;
- unsigned long next, addr = start;
- pgd_t *pgdp = pgd_offset(mm, start);
-
- do {
- pgd_t pgd = READ_ONCE(*pgdp);
- next = pgd_addr_end(addr, end);
-
- if (pgd_none(pgd)) {
- note_page(st, addr, 1, pgd_val(pgd));
- } else {
- BUG_ON(pgd_bad(pgd));
- walk_pud(st, pgdp, addr, next);
- }
- } while (pgdp++, addr = next, addr != end);
-}
+ if (info->base_addr < TASK_SIZE_64)
+ end = TASK_SIZE_64;
-void ptdump_walk_pgd(struct seq_file *m, struct ptdump_info *info)
-{
- struct pg_state st = {
- .seq = m,
+ st = (struct pg_state){
+ .seq = s,
.marker = info->markers,
+ .ptdump = {
+ .note_page = note_page,
+ .range = (struct ptdump_range[]){
+ {info->base_addr, end},
+ {0, 0}
+ }
+ }
};
- walk_pgd(&st, info->mm, info->base_addr);
-
- note_page(&st, 0, 0, 0);
+ ptdump_walk_pgd(&st.ptdump, info->mm);
}
static void ptdump_initialize(void)
@@ -399,10 +351,17 @@ void ptdump_check_wx(void)
{ -1, NULL},
},
.check_wx = true,
+ .ptdump = {
+ .note_page = note_page,
+ .range = (struct ptdump_range[]) {
+ {PAGE_OFFSET, ~0UL},
+ {0, 0}
+ }
+ }
};
- walk_pgd(&st, &init_mm, PAGE_OFFSET);
- note_page(&st, 0, 0, 0);
+ ptdump_walk_pgd(&st.ptdump, &init_mm);
+
if (st.wx_pages || st.uxn_pages)
pr_warn("Checked W+X mappings: FAILED, %lu W+X pages found, %lu non-UXN pages found\n",
st.wx_pages, st.uxn_pages);
--- a/arch/arm64/mm/Makefile~arm64-mm-convert-mm-dumpc-to-use-walk_page_range
+++ a/arch/arm64/mm/Makefile
@@ -4,8 +4,8 @@ obj-y := dma-mapping.o extable.o faul
ioremap.o mmap.o pgd.o mmu.o \
context.o proc.o pageattr.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_ARM64_PTDUMP_CORE) += dump.o
-obj-$(CONFIG_ARM64_PTDUMP_DEBUGFS) += ptdump_debugfs.o
+obj-$(CONFIG_PTDUMP_CORE) += dump.o
+obj-$(CONFIG_PTDUMP_DEBUGFS) += ptdump_debugfs.o
obj-$(CONFIG_NUMA) += numa.o
obj-$(CONFIG_DEBUG_VIRTUAL) += physaddr.o
KASAN_SANITIZE_physaddr.o += n
--- a/arch/arm64/mm/mmu.c~arm64-mm-convert-mm-dumpc-to-use-walk_page_range
+++ a/arch/arm64/mm/mmu.c
@@ -943,13 +943,13 @@ int __init arch_ioremap_pud_supported(vo
* SW table walks can't handle removal of intermediate entries.
*/
return IS_ENABLED(CONFIG_ARM64_4K_PAGES) &&
- !IS_ENABLED(CONFIG_ARM64_PTDUMP_DEBUGFS);
+ !IS_ENABLED(CONFIG_PTDUMP_DEBUGFS);
}
int __init arch_ioremap_pmd_supported(void)
{
/* See arch_ioremap_pud_supported() */
- return !IS_ENABLED(CONFIG_ARM64_PTDUMP_DEBUGFS);
+ return !IS_ENABLED(CONFIG_PTDUMP_DEBUGFS);
}
int pud_set_huge(pud_t *pudp, phys_addr_t phys, pgprot_t prot)
--- a/arch/arm64/mm/ptdump_debugfs.c~arm64-mm-convert-mm-dumpc-to-use-walk_page_range
+++ a/arch/arm64/mm/ptdump_debugfs.c
@@ -7,7 +7,7 @@
static int ptdump_show(struct seq_file *m, void *v)
{
struct ptdump_info *info = m->private;
- ptdump_walk_pgd(m, info);
+ ptdump_walk(m, info);
return 0;
}
DEFINE_SHOW_ATTRIBUTE(ptdump);
--- a/drivers/firmware/efi/arm-runtime.c~arm64-mm-convert-mm-dumpc-to-use-walk_page_range
+++ a/drivers/firmware/efi/arm-runtime.c
@@ -27,7 +27,7 @@
extern u64 efi_system_table;
-#ifdef CONFIG_ARM64_PTDUMP_DEBUGFS
+#if defined(CONFIG_PTDUMP_DEBUGFS) && defined(CONFIG_ARM64)
#include <asm/ptdump.h>
static struct ptdump_info efi_ptdump_info = {
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 45/67] arm64: mm: display non-present entries in ptdump
2020-02-04 1:33 incoming Andrew Morton
` (43 preceding siblings ...)
2020-02-04 1:36 ` [patch 44/67] arm64: mm: convert mm/dump.c to use walk_page_range() Andrew Morton
@ 2020-02-04 1:36 ` Andrew Morton
2020-02-04 1:36 ` [patch 46/67] mm: ptdump: reduce level numbers by 1 in note_page() Andrew Morton
` (24 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:36 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: arm64: mm: display non-present entries in ptdump
Previously the /sys/kernel/debug/kernel_page_tables file would only show
lines for entries present in the page tables. However it is useful to
also show non-present entries as this makes the size and level of the
holes more visible. This aligns the behaviour with x86 which also shows
holes.
Link: http://lkml.kernel.org/r/20191218162402.45610-23-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/arm64/mm/dump.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
--- a/arch/arm64/mm/dump.c~arm64-mm-display-non-present-entries-in-ptdump
+++ a/arch/arm64/mm/dump.c
@@ -270,21 +270,22 @@ static void note_page(struct ptdump_stat
if (st->current_prot) {
note_prot_uxn(st, addr);
note_prot_wx(st, addr);
- pt_dump_seq_printf(st->seq, "0x%016lx-0x%016lx ",
+ }
+
+ pt_dump_seq_printf(st->seq, "0x%016lx-0x%016lx ",
st->start_address, addr);
- delta = (addr - st->start_address) >> 10;
- while (!(delta & 1023) && unit[1]) {
- delta >>= 10;
- unit++;
- }
- pt_dump_seq_printf(st->seq, "%9lu%c %s", delta, *unit,
- pg_level[st->level].name);
- if (pg_level[st->level].bits)
- dump_prot(st, pg_level[st->level].bits,
- pg_level[st->level].num);
- pt_dump_seq_puts(st->seq, "\n");
+ delta = (addr - st->start_address) >> 10;
+ while (!(delta & 1023) && unit[1]) {
+ delta >>= 10;
+ unit++;
}
+ pt_dump_seq_printf(st->seq, "%9lu%c %s", delta, *unit,
+ pg_level[st->level].name);
+ if (st->current_prot && pg_level[st->level].bits)
+ dump_prot(st, pg_level[st->level].bits,
+ pg_level[st->level].num);
+ pt_dump_seq_puts(st->seq, "\n");
if (addr >= st->marker[1].start_address) {
st->marker++;
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 46/67] mm: ptdump: reduce level numbers by 1 in note_page()
2020-02-04 1:33 incoming Andrew Morton
` (44 preceding siblings ...)
2020-02-04 1:36 ` [patch 45/67] arm64: mm: display non-present entries in ptdump Andrew Morton
@ 2020-02-04 1:36 ` Andrew Morton
2020-02-04 1:36 ` [patch 47/67] x86: mm: avoid allocating struct mm_struct on the stack Andrew Morton
` (23 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:36 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, steven.price, tglx, torvalds, vgupta, will,
zong.li
From: Steven Price <steven.price@arm.com>
Subject: mm: ptdump: reduce level numbers by 1 in note_page()
Rather than having to increment the 'depth' number by 1 in ptdump_hole(),
let's change the meaning of 'level' in note_page() since that makes the
code simplier.
Note that for x86, the level numbers were previously increased by 1 in
commit 45dcd2091363 ("x86/mm/dump_pagetables: Fix printout of p4d level")
and the comment "Bit 7 has a different meaning" was not updated, so this
change also makes the code match the comment again.
Link: http://lkml.kernel.org/r/20191218162402.45610-24-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/arm64/mm/dump.c | 6 +++---
arch/x86/mm/dump_pagetables.c | 19 ++++++++++---------
include/linux/ptdump.h | 1 +
mm/ptdump.c | 16 ++++++++--------
4 files changed, 22 insertions(+), 20 deletions(-)
--- a/arch/arm64/mm/dump.c~mm-ptdump-reduce-level-numbers-by-1-in-note_page
+++ a/arch/arm64/mm/dump.c
@@ -176,8 +176,7 @@ struct pg_level {
};
static struct pg_level pg_level[] = {
- {
- }, { /* pgd */
+ { /* pgd */
.name = "PGD",
.bits = pte_bits,
.num = ARRAY_SIZE(pte_bits),
@@ -257,7 +256,7 @@ static void note_page(struct ptdump_stat
if (level >= 0)
prot = val & pg_level[level].mask;
- if (!st->level) {
+ if (st->level == -1) {
st->level = level;
st->current_prot = prot;
st->start_address = addr;
@@ -351,6 +350,7 @@ void ptdump_check_wx(void)
{ 0, NULL},
{ -1, NULL},
},
+ .level = -1,
.check_wx = true,
.ptdump = {
.note_page = note_page,
--- a/arch/x86/mm/dump_pagetables.c~mm-ptdump-reduce-level-numbers-by-1-in-note_page
+++ a/arch/x86/mm/dump_pagetables.c
@@ -180,7 +180,7 @@ static struct addr_marker address_marker
static void printk_prot(struct seq_file *m, pgprotval_t pr, int level, bool dmsg)
{
static const char * const level_name[] =
- { "cr3", "pgd", "p4d", "pud", "pmd", "pte" };
+ { "pgd", "p4d", "pud", "pmd", "pte" };
if (!(pr & _PAGE_PRESENT)) {
/* Not present */
@@ -204,12 +204,12 @@ static void printk_prot(struct seq_file
pt_dump_cont_printf(m, dmsg, " ");
/* Bit 7 has a different meaning on level 3 vs 4 */
- if (level <= 4 && pr & _PAGE_PSE)
+ if (level <= 3 && pr & _PAGE_PSE)
pt_dump_cont_printf(m, dmsg, "PSE ");
else
pt_dump_cont_printf(m, dmsg, " ");
- if ((level == 5 && pr & _PAGE_PAT) ||
- ((level == 4 || level == 3) && pr & _PAGE_PAT_LARGE))
+ if ((level == 4 && pr & _PAGE_PAT) ||
+ ((level == 3 || level == 2) && pr & _PAGE_PAT_LARGE))
pt_dump_cont_printf(m, dmsg, "PAT ");
else
pt_dump_cont_printf(m, dmsg, " ");
@@ -271,15 +271,15 @@ static void note_page(struct ptdump_stat
new_prot = val & PTE_FLAGS_MASK;
- if (level > 1) {
- new_eff = effective_prot(st->prot_levels[level - 2],
+ if (level > 0) {
+ new_eff = effective_prot(st->prot_levels[level - 1],
new_prot);
} else {
new_eff = new_prot;
}
- if (level > 0)
- st->prot_levels[level - 1] = new_eff;
+ if (level >= 0)
+ st->prot_levels[level] = new_eff;
/*
* If we have a "break" in the series, we need to flush the state that
@@ -289,7 +289,7 @@ static void note_page(struct ptdump_stat
cur = st->current_prot;
eff = st->effective_prot;
- if (!st->level) {
+ if (st->level == -1) {
/* First entry */
st->current_prot = new_prot;
st->effective_prot = new_eff;
@@ -380,6 +380,7 @@ static void ptdump_walk_pgd_level_core(s
.note_page = note_page,
.range = ptdump_ranges
},
+ .level = -1,
.to_dmesg = dmesg,
.check_wx = checkwx,
.seq = m
--- a/include/linux/ptdump.h~mm-ptdump-reduce-level-numbers-by-1-in-note_page
+++ a/include/linux/ptdump.h
@@ -11,6 +11,7 @@ struct ptdump_range {
};
struct ptdump_state {
+ /* level is 0:PGD to 4:PTE, or -1 if unknown */
void (*note_page)(struct ptdump_state *st, unsigned long addr,
int level, unsigned long val);
const struct ptdump_range *range;
--- a/mm/ptdump.c~mm-ptdump-reduce-level-numbers-by-1-in-note_page
+++ a/mm/ptdump.c
@@ -17,7 +17,7 @@ static inline int note_kasan_page_table(
{
struct ptdump_state *st = walk->private;
- st->note_page(st, addr, 5, pte_val(kasan_early_shadow_pte[0]));
+ st->note_page(st, addr, 4, pte_val(kasan_early_shadow_pte[0]));
walk->action = ACTION_CONTINUE;
@@ -37,7 +37,7 @@ static int ptdump_pgd_entry(pgd_t *pgd,
#endif
if (pgd_leaf(val))
- st->note_page(st, addr, 1, pgd_val(val));
+ st->note_page(st, addr, 0, pgd_val(val));
return 0;
}
@@ -54,7 +54,7 @@ static int ptdump_p4d_entry(p4d_t *p4d,
#endif
if (p4d_leaf(val))
- st->note_page(st, addr, 2, p4d_val(val));
+ st->note_page(st, addr, 1, p4d_val(val));
return 0;
}
@@ -71,7 +71,7 @@ static int ptdump_pud_entry(pud_t *pud,
#endif
if (pud_leaf(val))
- st->note_page(st, addr, 3, pud_val(val));
+ st->note_page(st, addr, 2, pud_val(val));
return 0;
}
@@ -88,7 +88,7 @@ static int ptdump_pmd_entry(pmd_t *pmd,
#endif
if (pmd_leaf(val))
- st->note_page(st, addr, 4, pmd_val(val));
+ st->note_page(st, addr, 3, pmd_val(val));
return 0;
}
@@ -98,7 +98,7 @@ static int ptdump_pte_entry(pte_t *pte,
{
struct ptdump_state *st = walk->private;
- st->note_page(st, addr, 5, pte_val(READ_ONCE(*pte)));
+ st->note_page(st, addr, 4, pte_val(READ_ONCE(*pte)));
return 0;
}
@@ -108,7 +108,7 @@ static int ptdump_hole(unsigned long add
{
struct ptdump_state *st = walk->private;
- st->note_page(st, addr, depth + 1, 0);
+ st->note_page(st, addr, depth, 0);
return 0;
}
@@ -135,5 +135,5 @@ void ptdump_walk_pgd(struct ptdump_state
up_read(&mm->mmap_sem);
/* Flush out the last page */
- st->note_page(st, 0, 0, 0);
+ st->note_page(st, 0, -1, 0);
}
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 47/67] x86: mm: avoid allocating struct mm_struct on the stack
2020-02-04 1:33 incoming Andrew Morton
` (45 preceding siblings ...)
2020-02-04 1:36 ` [patch 46/67] mm: ptdump: reduce level numbers by 1 in note_page() Andrew Morton
@ 2020-02-04 1:36 ` Andrew Morton
2020-02-04 1:36 ` [patch 48/67] powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case Andrew Morton
` (22 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:36 UTC (permalink / raw)
To: akpm, alex, aou, ard.biesheuvel, arnd, benh, borntraeger, bp,
catalin.marinas, dave.hansen, davem, gor, heiko.carstens, hpa,
james.morse, jglisse, jhogan, kan.liang, linux-mm, linux, luto,
mark.rutland, mingo, mm-commits, mpe, paul.burton, paul.walmsley,
paulus, peterz, ralf, sfr, steven.price, tglx, torvalds, vgupta,
will, zong.li
From: Steven Price <steven.price@arm.com>
Subject: x86: mm: avoid allocating struct mm_struct on the stack
struct mm_struct is quite large (~1664 bytes) and so allocating on the
stack may cause problems as the kernel stack size is small.
Since ptdump_walk_pgd_level_core() was only allocating the structure so
that it could modify the pgd argument we can instead introduce a pgd
override in struct mm_walk and pass this down the call stack to where it
is needed.
Since the correct mm_struct is now being passed down, it is now also
unnecessary to take the mmap_sem semaphore because ptdump_walk_pgd() will
now take the semaphore on the real mm.
[steven.price@arm.com: restore missed arm64 changes]
Link: http://lkml.kernel.org/r/20200108145710.34314-1-steven.price@arm.com
Link: http://lkml.kernel.org/r/20200108145710.34314-1-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/arm64/mm/dump.c | 4 ++--
arch/x86/mm/debug_pagetables.c | 10 ++--------
arch/x86/mm/dump_pagetables.c | 18 +++++++-----------
include/linux/pagewalk.h | 3 +++
include/linux/ptdump.h | 2 +-
mm/pagewalk.c | 7 ++++++-
mm/ptdump.c | 4 ++--
7 files changed, 23 insertions(+), 25 deletions(-)
--- a/arch/arm64/mm/dump.c~x86-mm-avoid-allocating-struct-mm_struct-on-the-stack
+++ a/arch/arm64/mm/dump.c
@@ -323,7 +323,7 @@ void ptdump_walk(struct seq_file *s, str
}
};
- ptdump_walk_pgd(&st.ptdump, info->mm);
+ ptdump_walk_pgd(&st.ptdump, info->mm, NULL);
}
static void ptdump_initialize(void)
@@ -361,7 +361,7 @@ void ptdump_check_wx(void)
}
};
- ptdump_walk_pgd(&st.ptdump, &init_mm);
+ ptdump_walk_pgd(&st.ptdump, &init_mm, NULL);
if (st.wx_pages || st.uxn_pages)
pr_warn("Checked W+X mappings: FAILED, %lu W+X pages found, %lu non-UXN pages found\n",
--- a/arch/x86/mm/debug_pagetables.c~x86-mm-avoid-allocating-struct-mm_struct-on-the-stack
+++ a/arch/x86/mm/debug_pagetables.c
@@ -15,11 +15,8 @@ DEFINE_SHOW_ATTRIBUTE(ptdump);
static int ptdump_curknl_show(struct seq_file *m, void *v)
{
- if (current->mm->pgd) {
- down_read(¤t->mm->mmap_sem);
+ if (current->mm->pgd)
ptdump_walk_pgd_level_debugfs(m, current->mm, false);
- up_read(¤t->mm->mmap_sem);
- }
return 0;
}
@@ -28,11 +25,8 @@ DEFINE_SHOW_ATTRIBUTE(ptdump_curknl);
#ifdef CONFIG_PAGE_TABLE_ISOLATION
static int ptdump_curusr_show(struct seq_file *m, void *v)
{
- if (current->mm->pgd) {
- down_read(¤t->mm->mmap_sem);
+ if (current->mm->pgd)
ptdump_walk_pgd_level_debugfs(m, current->mm, true);
- up_read(¤t->mm->mmap_sem);
- }
return 0;
}
--- a/arch/x86/mm/dump_pagetables.c~x86-mm-avoid-allocating-struct-mm_struct-on-the-stack
+++ a/arch/x86/mm/dump_pagetables.c
@@ -357,7 +357,8 @@ static void note_page(struct ptdump_stat
}
}
-static void ptdump_walk_pgd_level_core(struct seq_file *m, pgd_t *pgd,
+static void ptdump_walk_pgd_level_core(struct seq_file *m,
+ struct mm_struct *mm, pgd_t *pgd,
bool checkwx, bool dmesg)
{
const struct ptdump_range ptdump_ranges[] = {
@@ -386,12 +387,7 @@ static void ptdump_walk_pgd_level_core(s
.seq = m
};
- struct mm_struct fake_mm = {
- .pgd = pgd
- };
- init_rwsem(&fake_mm.mmap_sem);
-
- ptdump_walk_pgd(&st.ptdump, &fake_mm);
+ ptdump_walk_pgd(&st.ptdump, mm, pgd);
if (!checkwx)
return;
@@ -404,7 +400,7 @@ static void ptdump_walk_pgd_level_core(s
void ptdump_walk_pgd_level(struct seq_file *m, struct mm_struct *mm)
{
- ptdump_walk_pgd_level_core(m, mm->pgd, false, true);
+ ptdump_walk_pgd_level_core(m, mm, mm->pgd, false, true);
}
void ptdump_walk_pgd_level_debugfs(struct seq_file *m, struct mm_struct *mm,
@@ -415,7 +411,7 @@ void ptdump_walk_pgd_level_debugfs(struc
if (user && boot_cpu_has(X86_FEATURE_PTI))
pgd = kernel_to_user_pgdp(pgd);
#endif
- ptdump_walk_pgd_level_core(m, pgd, false, false);
+ ptdump_walk_pgd_level_core(m, mm, pgd, false, false);
}
EXPORT_SYMBOL_GPL(ptdump_walk_pgd_level_debugfs);
@@ -430,13 +426,13 @@ void ptdump_walk_user_pgd_level_checkwx(
pr_info("x86/mm: Checking user space page tables\n");
pgd = kernel_to_user_pgdp(pgd);
- ptdump_walk_pgd_level_core(NULL, pgd, true, false);
+ ptdump_walk_pgd_level_core(NULL, &init_mm, pgd, true, false);
#endif
}
void ptdump_walk_pgd_level_checkwx(void)
{
- ptdump_walk_pgd_level_core(NULL, INIT_PGD, true, false);
+ ptdump_walk_pgd_level_core(NULL, &init_mm, INIT_PGD, true, false);
}
static int __init pt_dump_init(void)
--- a/include/linux/pagewalk.h~x86-mm-avoid-allocating-struct-mm_struct-on-the-stack
+++ a/include/linux/pagewalk.h
@@ -74,6 +74,7 @@ enum page_walk_action {
* mm_walk - walk_page_range data
* @ops: operation to call during the walk
* @mm: mm_struct representing the target process of page table walk
+ * @pgd: pointer to PGD; only valid with no_vma (otherwise set to NULL)
* @vma: vma currently walked (NULL if walking outside vmas)
* @action: next action to perform (see enum page_walk_action)
* @no_vma: walk ignoring vmas (vma will always be NULL)
@@ -84,6 +85,7 @@ enum page_walk_action {
struct mm_walk {
const struct mm_walk_ops *ops;
struct mm_struct *mm;
+ pgd_t *pgd;
struct vm_area_struct *vma;
enum page_walk_action action;
bool no_vma;
@@ -95,6 +97,7 @@ int walk_page_range(struct mm_struct *mm
void *private);
int walk_page_range_novma(struct mm_struct *mm, unsigned long start,
unsigned long end, const struct mm_walk_ops *ops,
+ pgd_t *pgd,
void *private);
int walk_page_vma(struct vm_area_struct *vma, const struct mm_walk_ops *ops,
void *private);
--- a/include/linux/ptdump.h~x86-mm-avoid-allocating-struct-mm_struct-on-the-stack
+++ a/include/linux/ptdump.h
@@ -17,6 +17,6 @@ struct ptdump_state {
const struct ptdump_range *range;
};
-void ptdump_walk_pgd(struct ptdump_state *st, struct mm_struct *mm);
+void ptdump_walk_pgd(struct ptdump_state *st, struct mm_struct *mm, pgd_t *pgd);
#endif /* _LINUX_PTDUMP_H */
--- a/mm/pagewalk.c~x86-mm-avoid-allocating-struct-mm_struct-on-the-stack
+++ a/mm/pagewalk.c
@@ -206,7 +206,10 @@ static int walk_pgd_range(unsigned long
const struct mm_walk_ops *ops = walk->ops;
int err = 0;
- pgd = pgd_offset(walk->mm, addr);
+ if (walk->pgd)
+ pgd = walk->pgd + pgd_index(addr);
+ else
+ pgd = pgd_offset(walk->mm, addr);
do {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd)) {
@@ -436,11 +439,13 @@ int walk_page_range(struct mm_struct *mm
*/
int walk_page_range_novma(struct mm_struct *mm, unsigned long start,
unsigned long end, const struct mm_walk_ops *ops,
+ pgd_t *pgd,
void *private)
{
struct mm_walk walk = {
.ops = ops,
.mm = mm,
+ .pgd = pgd,
.private = private,
.no_vma = true
};
--- a/mm/ptdump.c~x86-mm-avoid-allocating-struct-mm_struct-on-the-stack
+++ a/mm/ptdump.c
@@ -122,14 +122,14 @@ static const struct mm_walk_ops ptdump_o
.pte_hole = ptdump_hole,
};
-void ptdump_walk_pgd(struct ptdump_state *st, struct mm_struct *mm)
+void ptdump_walk_pgd(struct ptdump_state *st, struct mm_struct *mm, pgd_t *pgd)
{
const struct ptdump_range *range = st->range;
down_read(&mm->mmap_sem);
while (range->start != range->end) {
walk_page_range_novma(mm, range->start, range->end,
- &ptdump_ops, st);
+ &ptdump_ops, pgd, st);
range++;
}
up_read(&mm->mmap_sem);
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 48/67] powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case
2020-02-04 1:33 incoming Andrew Morton
` (46 preceding siblings ...)
2020-02-04 1:36 ` [patch 47/67] x86: mm: avoid allocating struct mm_struct on the stack Andrew Morton
@ 2020-02-04 1:36 ` Andrew Morton
2020-02-04 1:36 ` [patch 49/67] mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush Andrew Morton
` (21 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:36 UTC (permalink / raw)
To: akpm, aneesh.kumar, linux-mm, mm-commits, mpe, peterz, stable, torvalds
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Subject: powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case
Patch series "Fixup page directory freeing", v4.
This is a repost of patch series from Peter with the arch specific changes
except ppc64 dropped. ppc64 changes are added here because we are redoing
the patch series on top of ppc64 changes. This makes it easy to backport
these changes. Only the first 2 patches need to be backported to stable.
The thing is, on anything SMP, freeing page directories should observe the
exact same order as normal page freeing:
1) unhook page/directory
2) TLB invalidate
3) free page/directory
Without this, any concurrent page-table walk could end up with a
Use-after-Free. This is esp. trivial for anything that has software
page-table walkers (HAVE_FAST_GUP / software TLB fill) or the hardware
caches partial page-walks (ie. caches page directories).
Even on UP this might give issues since mmu_gather is preemptible these
days. An interrupt or preempted task accessing user pages might stumble
into the free page if the hardware caches page directories.
This patch series fixes ppc64 and add generic MMU_GATHER changes to
support the conversion of other architectures. I haven't added patches
w.r.t other architecture because they are yet to be acked.
This patch (of 9):
A followup patch is going to make sure we correctly invalidate page walk
cache before we free page table pages. In order to keep things simple
enable RCU_TABLE_FREE even for !SMP so that we don't have to fixup the
!SMP case differently in the followup patch
!SMP case is right now broken for radix translation w.r.t page walk
cache flush. We can get interrupted in between page table free and
that would imply we have page walk cache entries pointing to tables
which got freed already. Michael said "both our platforms that run on
Power9 force SMP on in Kconfig, so the !SMP case is unlikely to be a
problem for anyone in practice, unless they've hacked their kernel to
build it !SMP."
Link: http://lkml.kernel.org/r/20200116064531.483522-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/powerpc/Kconfig | 2 +-
arch/powerpc/include/asm/book3s/32/pgalloc.h | 8 --------
arch/powerpc/include/asm/book3s/64/pgalloc.h | 2 --
arch/powerpc/include/asm/nohash/pgalloc.h | 8 --------
arch/powerpc/mm/book3s64/pgtable.c | 7 -------
5 files changed, 1 insertion(+), 26 deletions(-)
--- a/arch/powerpc/include/asm/book3s/32/pgalloc.h~powerpc-mmu_gather-enable-rcu_table_free-even-for-smp-case
+++ a/arch/powerpc/include/asm/book3s/32/pgalloc.h
@@ -49,7 +49,6 @@ static inline void pgtable_free(void *ta
#define get_hugepd_cache_index(x) (x)
-#ifdef CONFIG_SMP
static inline void pgtable_free_tlb(struct mmu_gather *tlb,
void *table, int shift)
{
@@ -66,13 +65,6 @@ static inline void __tlb_remove_table(vo
pgtable_free(table, shift);
}
-#else
-static inline void pgtable_free_tlb(struct mmu_gather *tlb,
- void *table, int shift)
-{
- pgtable_free(table, shift);
-}
-#endif
static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table,
unsigned long address)
--- a/arch/powerpc/include/asm/book3s/64/pgalloc.h~powerpc-mmu_gather-enable-rcu_table_free-even-for-smp-case
+++ a/arch/powerpc/include/asm/book3s/64/pgalloc.h
@@ -19,9 +19,7 @@ extern struct vmemmap_backing *vmemmap_l
extern pmd_t *pmd_fragment_alloc(struct mm_struct *, unsigned long);
extern void pmd_fragment_free(unsigned long *);
extern void pgtable_free_tlb(struct mmu_gather *tlb, void *table, int shift);
-#ifdef CONFIG_SMP
extern void __tlb_remove_table(void *_table);
-#endif
void pte_frag_destroy(void *pte_frag);
static inline pgd_t *radix__pgd_alloc(struct mm_struct *mm)
--- a/arch/powerpc/include/asm/nohash/pgalloc.h~powerpc-mmu_gather-enable-rcu_table_free-even-for-smp-case
+++ a/arch/powerpc/include/asm/nohash/pgalloc.h
@@ -46,7 +46,6 @@ static inline void pgtable_free(void *ta
#define get_hugepd_cache_index(x) (x)
-#ifdef CONFIG_SMP
static inline void pgtable_free_tlb(struct mmu_gather *tlb, void *table, int shift)
{
unsigned long pgf = (unsigned long)table;
@@ -64,13 +63,6 @@ static inline void __tlb_remove_table(vo
pgtable_free(table, shift);
}
-#else
-static inline void pgtable_free_tlb(struct mmu_gather *tlb, void *table, int shift)
-{
- pgtable_free(table, shift);
-}
-#endif
-
static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table,
unsigned long address)
{
--- a/arch/powerpc/Kconfig~powerpc-mmu_gather-enable-rcu_table_free-even-for-smp-case
+++ a/arch/powerpc/Kconfig
@@ -222,7 +222,7 @@ config PPC
select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && HAVE_PERF_EVENTS_NMI && !HAVE_HARDLOCKUP_DETECTOR_ARCH
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
- select HAVE_RCU_TABLE_FREE if SMP
+ select HAVE_RCU_TABLE_FREE
select HAVE_RCU_TABLE_NO_INVALIDATE if HAVE_RCU_TABLE_FREE
select HAVE_MMU_GATHER_PAGE_SIZE
select HAVE_REGS_AND_STACK_ACCESS_API
--- a/arch/powerpc/mm/book3s64/pgtable.c~powerpc-mmu_gather-enable-rcu_table_free-even-for-smp-case
+++ a/arch/powerpc/mm/book3s64/pgtable.c
@@ -378,7 +378,6 @@ static inline void pgtable_free(void *ta
}
}
-#ifdef CONFIG_SMP
void pgtable_free_tlb(struct mmu_gather *tlb, void *table, int index)
{
unsigned long pgf = (unsigned long)table;
@@ -395,12 +394,6 @@ void __tlb_remove_table(void *_table)
return pgtable_free(table, index);
}
-#else
-void pgtable_free_tlb(struct mmu_gather *tlb, void *table, int index)
-{
- return pgtable_free(table, index);
-}
-#endif
#ifdef CONFIG_PROC_FS
atomic_long_t direct_pages_count[MMU_PAGE_COUNT];
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 49/67] mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush
2020-02-04 1:33 incoming Andrew Morton
` (47 preceding siblings ...)
2020-02-04 1:36 ` [patch 48/67] powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case Andrew Morton
@ 2020-02-04 1:36 ` Andrew Morton
2020-02-04 1:36 ` [patch 50/67] asm-generic/tlb: avoid potential double flush Andrew Morton
` (20 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:36 UTC (permalink / raw)
To: akpm, aneesh.kumar, linux-mm, mm-commits, mpe, peterz, stable, torvalds
From: Peter Zijlstra <peterz@infradead.org>
Subject: mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush
Architectures for which we have hardware walkers of Linux page table
should flush TLB on mmu gather batch allocation failures and batch flush.
Some architectures like POWER supports multiple translation modes (hash
and radix) and in the case of POWER only radix translation mode needs the
above TLBI. This is because for hash translation mode kernel wants to
avoid this extra flush since there are no hardware walkers of linux page
table. With radix translation, the hardware also walks linux page table
and with that, kernel needs to make sure to TLB invalidate page walk cache
before page table pages are freed.
More details in commit d86564a2f085 ("mm/tlb, x86/mm: Support invalidating
TLB caches for RCU_TABLE_FREE")
The changes to sparc are to make sure we keep the old behavior since we
are now removing HAVE_RCU_TABLE_NO_INVALIDATE. The default value for
tlb_needs_table_invalidate is to always force an invalidate and sparc can
avoid the table invalidate. Hence we define tlb_needs_table_invalidate to
false for sparc architecture.
Link: http://lkml.kernel.org/r/20200116064531.483522-3-aneesh.kumar@linux.ibm.com
Fixes: a46cc7a90fd8 ("powerpc/mm/radix: Improve TLB/PWC flushes")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/Kconfig | 3 ---
arch/powerpc/Kconfig | 1 -
arch/powerpc/include/asm/tlb.h | 11 +++++++++++
arch/sparc/Kconfig | 1 -
arch/sparc/include/asm/tlb_64.h | 9 +++++++++
include/asm-generic/tlb.h | 22 +++++++++++++++-------
mm/mmu_gather.c | 16 ++++++++--------
7 files changed, 43 insertions(+), 20 deletions(-)
--- a/arch/Kconfig~mm-mmu_gather-invalidate-tlb-correctly-on-batch-allocation-failure-and-flush
+++ a/arch/Kconfig
@@ -396,9 +396,6 @@ config HAVE_ARCH_JUMP_LABEL_RELATIVE
config HAVE_RCU_TABLE_FREE
bool
-config HAVE_RCU_TABLE_NO_INVALIDATE
- bool
-
config HAVE_MMU_GATHER_PAGE_SIZE
bool
--- a/arch/powerpc/include/asm/tlb.h~mm-mmu_gather-invalidate-tlb-correctly-on-batch-allocation-failure-and-flush
+++ a/arch/powerpc/include/asm/tlb.h
@@ -26,6 +26,17 @@
#define tlb_flush tlb_flush
extern void tlb_flush(struct mmu_gather *tlb);
+/*
+ * book3s:
+ * Hash does not use the linux page-tables, so we can avoid
+ * the TLB invalidate for page-table freeing, Radix otoh does use the
+ * page-tables and needs the TLBI.
+ *
+ * nohash:
+ * We still do TLB invalidate in the __pte_free_tlb routine before we
+ * add the page table pages to mmu gather table batch.
+ */
+#define tlb_needs_table_invalidate() radix_enabled()
/* Get the generic bits... */
#include <asm-generic/tlb.h>
--- a/arch/powerpc/Kconfig~mm-mmu_gather-invalidate-tlb-correctly-on-batch-allocation-failure-and-flush
+++ a/arch/powerpc/Kconfig
@@ -223,7 +223,6 @@ config PPC
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
select HAVE_RCU_TABLE_FREE
- select HAVE_RCU_TABLE_NO_INVALIDATE if HAVE_RCU_TABLE_FREE
select HAVE_MMU_GATHER_PAGE_SIZE
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_RELIABLE_STACKTRACE if PPC_BOOK3S_64 && CPU_LITTLE_ENDIAN
--- a/arch/sparc/include/asm/tlb_64.h~mm-mmu_gather-invalidate-tlb-correctly-on-batch-allocation-failure-and-flush
+++ a/arch/sparc/include/asm/tlb_64.h
@@ -28,6 +28,15 @@ void flush_tlb_pending(void);
#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
#define tlb_flush(tlb) flush_tlb_pending()
+/*
+ * SPARC64's hardware TLB fill does not use the Linux page-tables
+ * and therefore we don't need a TLBI when freeing page-table pages.
+ */
+
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+#define tlb_needs_table_invalidate() (false)
+#endif
+
#include <asm-generic/tlb.h>
#endif /* _SPARC64_TLB_H */
--- a/arch/sparc/Kconfig~mm-mmu_gather-invalidate-tlb-correctly-on-batch-allocation-failure-and-flush
+++ a/arch/sparc/Kconfig
@@ -65,7 +65,6 @@ config SPARC64
select HAVE_KRETPROBES
select HAVE_KPROBES
select HAVE_RCU_TABLE_FREE if SMP
- select HAVE_RCU_TABLE_NO_INVALIDATE if HAVE_RCU_TABLE_FREE
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_ARCH_TRANSPARENT_HUGEPAGE
select HAVE_DYNAMIC_FTRACE
--- a/include/asm-generic/tlb.h~mm-mmu_gather-invalidate-tlb-correctly-on-batch-allocation-failure-and-flush
+++ a/include/asm-generic/tlb.h
@@ -137,13 +137,6 @@
* When used, an architecture is expected to provide __tlb_remove_table()
* which does the actual freeing of these pages.
*
- * HAVE_RCU_TABLE_NO_INVALIDATE
- *
- * This makes HAVE_RCU_TABLE_FREE avoid calling tlb_flush_mmu_tlbonly() before
- * freeing the page-table pages. This can be avoided if you use
- * HAVE_RCU_TABLE_FREE and your architecture does _NOT_ use the Linux
- * page-tables natively.
- *
* MMU_GATHER_NO_RANGE
*
* Use this if your architecture lacks an efficient flush_tlb_range().
@@ -189,8 +182,23 @@ struct mmu_table_batch {
extern void tlb_remove_table(struct mmu_gather *tlb, void *table);
+/*
+ * This allows an architecture that does not use the linux page-tables for
+ * hardware to skip the TLBI when freeing page tables.
+ */
+#ifndef tlb_needs_table_invalidate
+#define tlb_needs_table_invalidate() (true)
#endif
+#else
+
+#ifdef tlb_needs_table_invalidate
+#error tlb_needs_table_invalidate() requires HAVE_RCU_TABLE_FREE
+#endif
+
+#endif /* CONFIG_HAVE_RCU_TABLE_FREE */
+
+
#ifndef CONFIG_HAVE_MMU_GATHER_NO_GATHER
/*
* If we can't allocate a page to make a big batch of page pointers
--- a/mm/mmu_gather.c~mm-mmu_gather-invalidate-tlb-correctly-on-batch-allocation-failure-and-flush
+++ a/mm/mmu_gather.c
@@ -102,14 +102,14 @@ bool __tlb_remove_page_size(struct mmu_g
*/
static inline void tlb_table_invalidate(struct mmu_gather *tlb)
{
-#ifndef CONFIG_HAVE_RCU_TABLE_NO_INVALIDATE
- /*
- * Invalidate page-table caches used by hardware walkers. Then we still
- * need to RCU-sched wait while freeing the pages because software
- * walkers can still be in-flight.
- */
- tlb_flush_mmu_tlbonly(tlb);
-#endif
+ if (tlb_needs_table_invalidate()) {
+ /*
+ * Invalidate page-table caches used by hardware walkers. Then
+ * we still need to RCU-sched wait while freeing the pages
+ * because software walkers can still be in-flight.
+ */
+ tlb_flush_mmu_tlbonly(tlb);
+ }
}
static void tlb_remove_table_smp_sync(void *arg)
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 50/67] asm-generic/tlb: avoid potential double flush
2020-02-04 1:33 incoming Andrew Morton
` (48 preceding siblings ...)
2020-02-04 1:36 ` [patch 49/67] mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush Andrew Morton
@ 2020-02-04 1:36 ` Andrew Morton
2020-02-04 1:36 ` [patch 51/67] asm-gemeric/tlb: remove stray function declarations Andrew Morton
` (19 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:36 UTC (permalink / raw)
To: akpm, aneesh.kumar, linux-mm, mm-commits, mpe, peterz, torvalds
From: Peter Zijlstra <peterz@infradead.org>
Subject: asm-generic/tlb: avoid potential double flush
Aneesh reported that:
tlb_flush_mmu()
tlb_flush_mmu_tlbonly()
tlb_flush() <-- #1
tlb_flush_mmu_free()
tlb_table_flush()
tlb_table_invalidate()
tlb_flush_mmu_tlbonly()
tlb_flush() <-- #2
does two TLBIs when tlb->fullmm, because __tlb_reset_range() will not
clear tlb->end in that case.
Observe that any caller to __tlb_adjust_range() also sets at least one of
the tlb->freed_tables || tlb->cleared_p* bits, and those are
unconditionally cleared by __tlb_reset_range().
Change the condition for actually issuing TLBI to having one of those bits
set, as opposed to having tlb->end != 0.
Link: http://lkml.kernel.org/r/20200116064531.483522-4-aneesh.kumar@linux.ibm.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/asm-generic/tlb.h | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/include/asm-generic/tlb.h~asm-generic-tlb-avoid-potential-double-flush
+++ a/include/asm-generic/tlb.h
@@ -402,7 +402,12 @@ tlb_update_vma_flags(struct mmu_gather *
static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb)
{
- if (!tlb->end)
+ /*
+ * Anything calling __tlb_adjust_range() also sets at least one of
+ * these bits.
+ */
+ if (!(tlb->freed_tables || tlb->cleared_ptes || tlb->cleared_pmds ||
+ tlb->cleared_puds || tlb->cleared_p4ds))
return;
tlb_flush(tlb);
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 51/67] asm-gemeric/tlb: remove stray function declarations
2020-02-04 1:33 incoming Andrew Morton
` (49 preceding siblings ...)
2020-02-04 1:36 ` [patch 50/67] asm-generic/tlb: avoid potential double flush Andrew Morton
@ 2020-02-04 1:36 ` Andrew Morton
2020-02-04 1:36 ` [patch 52/67] asm-generic/tlb: add missing CONFIG symbol Andrew Morton
` (18 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:36 UTC (permalink / raw)
To: akpm, aneesh.kumar, linux-mm, mm-commits, mpe, peterz, torvalds
From: Peter Zijlstra <peterz@infradead.org>
Subject: asm-gemeric/tlb: remove stray function declarations
We removed the actual functions a while ago.
Link: http://lkml.kernel.org/r/20200116064531.483522-5-aneesh.kumar@linux.ibm.com
Fixes: 1808d65b55e4 ("asm-generic/tlb: Remove arch_tlb*_mmu()")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/asm-generic/tlb.h | 4 ----
1 file changed, 4 deletions(-)
--- a/include/asm-generic/tlb.h~asm-gemeric-tlb-remove-stray-function-declarations
+++ a/include/asm-generic/tlb.h
@@ -285,11 +285,7 @@ struct mmu_gather {
#endif
};
-void arch_tlb_gather_mmu(struct mmu_gather *tlb,
- struct mm_struct *mm, unsigned long start, unsigned long end);
void tlb_flush_mmu(struct mmu_gather *tlb);
-void arch_tlb_finish_mmu(struct mmu_gather *tlb,
- unsigned long start, unsigned long end, bool force);
static inline void __tlb_adjust_range(struct mmu_gather *tlb,
unsigned long address,
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 52/67] asm-generic/tlb: add missing CONFIG symbol
2020-02-04 1:33 incoming Andrew Morton
` (50 preceding siblings ...)
2020-02-04 1:36 ` [patch 51/67] asm-gemeric/tlb: remove stray function declarations Andrew Morton
@ 2020-02-04 1:36 ` Andrew Morton
2020-02-04 1:37 ` [patch 53/67] asm-generic/tlb: rename HAVE_RCU_TABLE_FREE Andrew Morton
` (17 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:36 UTC (permalink / raw)
To: akpm, aneesh.kumar, linux-mm, mm-commits, mpe, peterz, torvalds
From: Peter Zijlstra <peterz@infradead.org>
Subject: asm-generic/tlb: add missing CONFIG symbol
Without this the symbol will not actually end up in .config files.
Link: http://lkml.kernel.org/r/20200116064531.483522-6-aneesh.kumar@linux.ibm.com
Fixes: a30e32bd79e9 ("asm-generic/tlb: Provide generic tlb_flush() based on flush_tlb_mm()")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/Kconfig | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/Kconfig~asm-generic-tlb-add-missing-config-symbol
+++ a/arch/Kconfig
@@ -399,6 +399,9 @@ config HAVE_RCU_TABLE_FREE
config HAVE_MMU_GATHER_PAGE_SIZE
bool
+config MMU_GATHER_NO_RANGE
+ bool
+
config HAVE_MMU_GATHER_NO_GATHER
bool
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 53/67] asm-generic/tlb: rename HAVE_RCU_TABLE_FREE
2020-02-04 1:33 incoming Andrew Morton
` (51 preceding siblings ...)
2020-02-04 1:36 ` [patch 52/67] asm-generic/tlb: add missing CONFIG symbol Andrew Morton
@ 2020-02-04 1:37 ` Andrew Morton
2020-02-04 1:37 ` [patch 54/67] asm-generic/tlb: rename HAVE_MMU_GATHER_PAGE_SIZE Andrew Morton
` (16 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:37 UTC (permalink / raw)
To: akpm, aneesh.kumar, linux-mm, mm-commits, mpe, peterz, torvalds
From: Peter Zijlstra <peterz@infradead.org>
Subject: asm-generic/tlb: rename HAVE_RCU_TABLE_FREE
Towards a more consistent naming scheme.
[akpm@linux-foundation.org: fix sparc64 Kconfig]
Link: http://lkml.kernel.org/r/20200116064531.483522-7-aneesh.kumar@linux.ibm.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/Kconfig | 2 +-
arch/arm/Kconfig | 2 +-
arch/arm/include/asm/tlb.h | 2 +-
arch/arm64/Kconfig | 2 +-
arch/powerpc/Kconfig | 2 +-
arch/s390/Kconfig | 2 +-
arch/sparc/Kconfig | 2 +-
arch/sparc/include/asm/tlb_64.h | 2 +-
arch/x86/Kconfig | 2 +-
arch/x86/include/asm/tlb.h | 4 ++--
include/asm-generic/tlb.h | 10 +++++-----
mm/gup.c | 2 +-
mm/mmu_gather.c | 8 ++++----
13 files changed, 21 insertions(+), 21 deletions(-)
--- a/arch/arm64/Kconfig~asm-generic-tlb-rename-have_rcu_table_free
+++ a/arch/arm64/Kconfig
@@ -165,7 +165,7 @@ config ARM64
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_FUNCTION_ARG_ACCESS_API
select HAVE_FUTEX_CMPXCHG if FUTEX
- select HAVE_RCU_TABLE_FREE
+ select MMU_GATHER_RCU_TABLE_FREE
select HAVE_RSEQ
select HAVE_STACKPROTECTOR
select HAVE_SYSCALL_TRACEPOINTS
--- a/arch/arm/include/asm/tlb.h~asm-generic-tlb-rename-have_rcu_table_free
+++ a/arch/arm/include/asm/tlb.h
@@ -37,7 +37,7 @@ static inline void __tlb_remove_table(vo
#include <asm-generic/tlb.h>
-#ifndef CONFIG_HAVE_RCU_TABLE_FREE
+#ifndef CONFIG_MMU_GATHER_RCU_TABLE_FREE
#define tlb_remove_table(tlb, entry) tlb_remove_page(tlb, entry)
#endif
--- a/arch/arm/Kconfig~asm-generic-tlb-rename-have_rcu_table_free
+++ a/arch/arm/Kconfig
@@ -102,7 +102,7 @@ config ARM
select HAVE_PERF_EVENTS
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
- select HAVE_RCU_TABLE_FREE if SMP && ARM_LPAE
+ select MMU_GATHER_RCU_TABLE_FREE if SMP && ARM_LPAE
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_RSEQ
select HAVE_STACKPROTECTOR
--- a/arch/Kconfig~asm-generic-tlb-rename-have_rcu_table_free
+++ a/arch/Kconfig
@@ -393,7 +393,7 @@ config HAVE_ARCH_JUMP_LABEL
config HAVE_ARCH_JUMP_LABEL_RELATIVE
bool
-config HAVE_RCU_TABLE_FREE
+config MMU_GATHER_RCU_TABLE_FREE
bool
config HAVE_MMU_GATHER_PAGE_SIZE
--- a/arch/powerpc/Kconfig~asm-generic-tlb-rename-have_rcu_table_free
+++ a/arch/powerpc/Kconfig
@@ -222,7 +222,7 @@ config PPC
select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && HAVE_PERF_EVENTS_NMI && !HAVE_HARDLOCKUP_DETECTOR_ARCH
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
- select HAVE_RCU_TABLE_FREE
+ select MMU_GATHER_RCU_TABLE_FREE
select HAVE_MMU_GATHER_PAGE_SIZE
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_RELIABLE_STACKTRACE if PPC_BOOK3S_64 && CPU_LITTLE_ENDIAN
--- a/arch/s390/Kconfig~asm-generic-tlb-rename-have_rcu_table_free
+++ a/arch/s390/Kconfig
@@ -169,7 +169,7 @@ config S390
select HAVE_OPROFILE
select HAVE_PCI
select HAVE_PERF_EVENTS
- select HAVE_RCU_TABLE_FREE
+ select MMU_GATHER_RCU_TABLE_FREE
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_RELIABLE_STACKTRACE
select HAVE_RSEQ
--- a/arch/sparc/include/asm/tlb_64.h~asm-generic-tlb-rename-have_rcu_table_free
+++ a/arch/sparc/include/asm/tlb_64.h
@@ -33,7 +33,7 @@ void flush_tlb_pending(void);
* and therefore we don't need a TLBI when freeing page-table pages.
*/
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+#ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
#define tlb_needs_table_invalidate() (false)
#endif
--- a/arch/sparc/Kconfig~asm-generic-tlb-rename-have_rcu_table_free
+++ a/arch/sparc/Kconfig
@@ -64,7 +64,7 @@ config SPARC64
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_KRETPROBES
select HAVE_KPROBES
- select HAVE_RCU_TABLE_FREE if SMP
+ select MMU_GATHER_RCU_TABLE_FREE if SMP
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_ARCH_TRANSPARENT_HUGEPAGE
select HAVE_DYNAMIC_FTRACE
--- a/arch/x86/include/asm/tlb.h~asm-generic-tlb-rename-have_rcu_table_free
+++ a/arch/x86/include/asm/tlb.h
@@ -29,8 +29,8 @@ static inline void tlb_flush(struct mmu_
* shootdown, enablement code for several hypervisors overrides
* .flush_tlb_others hook in pv_mmu_ops and implements it by issuing
* a hypercall. To keep software pagetable walkers safe in this case we
- * switch to RCU based table free (HAVE_RCU_TABLE_FREE). See the comment
- * below 'ifdef CONFIG_HAVE_RCU_TABLE_FREE' in include/asm-generic/tlb.h
+ * switch to RCU based table free (MMU_GATHER_RCU_TABLE_FREE). See the comment
+ * below 'ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE' in include/asm-generic/tlb.h
* for more details.
*/
static inline void __tlb_remove_table(void *table)
--- a/arch/x86/Kconfig~asm-generic-tlb-rename-have_rcu_table_free
+++ a/arch/x86/Kconfig
@@ -203,7 +203,7 @@ config X86
select HAVE_PCI
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
- select HAVE_RCU_TABLE_FREE if PARAVIRT
+ select MMU_GATHER_RCU_TABLE_FREE if PARAVIRT
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_RELIABLE_STACKTRACE if X86_64 && (UNWINDER_FRAME_POINTER || UNWINDER_ORC) && STACK_VALIDATION
select HAVE_FUNCTION_ARG_ACCESS_API
--- a/include/asm-generic/tlb.h~asm-generic-tlb-rename-have_rcu_table_free
+++ a/include/asm-generic/tlb.h
@@ -126,7 +126,7 @@
* This ensures we call tlb_flush() every time tlb_change_page_size() actually
* changes the size and provides mmu_gather::page_size to tlb_flush().
*
- * HAVE_RCU_TABLE_FREE
+ * MMU_GATHER_RCU_TABLE_FREE
*
* This provides tlb_remove_table(), to be used instead of tlb_remove_page()
* for page directores (__p*_free_tlb()). This provides separate freeing of
@@ -142,7 +142,7 @@
* Use this if your architecture lacks an efficient flush_tlb_range().
*/
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+#ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
/*
* Semi RCU freeing of the page directories.
*
@@ -193,10 +193,10 @@ extern void tlb_remove_table(struct mmu_
#else
#ifdef tlb_needs_table_invalidate
-#error tlb_needs_table_invalidate() requires HAVE_RCU_TABLE_FREE
+#error tlb_needs_table_invalidate() requires MMU_GATHER_RCU_TABLE_FREE
#endif
-#endif /* CONFIG_HAVE_RCU_TABLE_FREE */
+#endif /* CONFIG_MMU_GATHER_RCU_TABLE_FREE */
#ifndef CONFIG_HAVE_MMU_GATHER_NO_GATHER
@@ -235,7 +235,7 @@ extern bool __tlb_remove_page_size(struc
struct mmu_gather {
struct mm_struct *mm;
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+#ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
struct mmu_table_batch *batch;
#endif
--- a/mm/gup.c~asm-generic-tlb-rename-have_rcu_table_free
+++ a/mm/gup.c
@@ -1792,7 +1792,7 @@ EXPORT_SYMBOL(get_user_pages_unlocked);
* Before activating this code, please be aware that the following assumptions
* are currently made:
*
- * *) Either HAVE_RCU_TABLE_FREE is enabled, and tlb_remove_table() is used to
+ * *) Either MMU_GATHER_RCU_TABLE_FREE is enabled, and tlb_remove_table() is used to
* free pages containing page tables or TLB flushing requires IPI broadcast.
*
* *) ptes can be read atomically by the architecture.
--- a/mm/mmu_gather.c~asm-generic-tlb-rename-have_rcu_table_free
+++ a/mm/mmu_gather.c
@@ -91,7 +91,7 @@ bool __tlb_remove_page_size(struct mmu_g
#endif /* HAVE_MMU_GATHER_NO_GATHER */
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+#ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
/*
* See the comment near struct mmu_table_batch.
@@ -173,11 +173,11 @@ void tlb_remove_table(struct mmu_gather
tlb_table_flush(tlb);
}
-#endif /* CONFIG_HAVE_RCU_TABLE_FREE */
+#endif /* CONFIG_MMU_GATHER_RCU_TABLE_FREE */
static void tlb_flush_mmu_free(struct mmu_gather *tlb)
{
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+#ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
tlb_table_flush(tlb);
#endif
#ifndef CONFIG_HAVE_MMU_GATHER_NO_GATHER
@@ -220,7 +220,7 @@ void tlb_gather_mmu(struct mmu_gather *t
tlb->batch_count = 0;
#endif
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+#ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
tlb->batch = NULL;
#endif
#ifdef CONFIG_HAVE_MMU_GATHER_PAGE_SIZE
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 54/67] asm-generic/tlb: rename HAVE_MMU_GATHER_PAGE_SIZE
2020-02-04 1:33 incoming Andrew Morton
` (52 preceding siblings ...)
2020-02-04 1:37 ` [patch 53/67] asm-generic/tlb: rename HAVE_RCU_TABLE_FREE Andrew Morton
@ 2020-02-04 1:37 ` Andrew Morton
2020-02-04 1:37 ` [patch 55/67] asm-generic/tlb: rename HAVE_MMU_GATHER_NO_GATHER Andrew Morton
` (15 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:37 UTC (permalink / raw)
To: akpm, aneesh.kumar, linux-mm, mm-commits, mpe, peterz, torvalds
From: Peter Zijlstra <peterz@infradead.org>
Subject: asm-generic/tlb: rename HAVE_MMU_GATHER_PAGE_SIZE
Towards a more consistent naming scheme.
Link: http://lkml.kernel.org/r/20200116064531.483522-8-aneesh.kumar@linux.ibm.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/Kconfig | 2 +-
arch/powerpc/Kconfig | 2 +-
include/asm-generic/tlb.h | 9 ++++++---
mm/mmu_gather.c | 4 ++--
4 files changed, 10 insertions(+), 7 deletions(-)
--- a/arch/Kconfig~asm-generic-tlb-rename-have_mmu_gather_page_size
+++ a/arch/Kconfig
@@ -396,7 +396,7 @@ config HAVE_ARCH_JUMP_LABEL_RELATIVE
config MMU_GATHER_RCU_TABLE_FREE
bool
-config HAVE_MMU_GATHER_PAGE_SIZE
+config MMU_GATHER_PAGE_SIZE
bool
config MMU_GATHER_NO_RANGE
--- a/arch/powerpc/Kconfig~asm-generic-tlb-rename-have_mmu_gather_page_size
+++ a/arch/powerpc/Kconfig
@@ -223,7 +223,7 @@ config PPC
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
select MMU_GATHER_RCU_TABLE_FREE
- select HAVE_MMU_GATHER_PAGE_SIZE
+ select MMU_GATHER_PAGE_SIZE
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_RELIABLE_STACKTRACE if PPC_BOOK3S_64 && CPU_LITTLE_ENDIAN
select HAVE_SYSCALL_TRACEPOINTS
--- a/include/asm-generic/tlb.h~asm-generic-tlb-rename-have_mmu_gather_page_size
+++ a/include/asm-generic/tlb.h
@@ -121,11 +121,14 @@
*
* Additionally there are a few opt-in features:
*
- * HAVE_MMU_GATHER_PAGE_SIZE
+ * MMU_GATHER_PAGE_SIZE
*
* This ensures we call tlb_flush() every time tlb_change_page_size() actually
* changes the size and provides mmu_gather::page_size to tlb_flush().
*
+ * This might be useful if your architecture has size specific TLB
+ * invalidation instructions.
+ *
* MMU_GATHER_RCU_TABLE_FREE
*
* This provides tlb_remove_table(), to be used instead of tlb_remove_page()
@@ -279,7 +282,7 @@ struct mmu_gather {
struct mmu_gather_batch local;
struct page *__pages[MMU_GATHER_BUNDLE];
-#ifdef CONFIG_HAVE_MMU_GATHER_PAGE_SIZE
+#ifdef CONFIG_MMU_GATHER_PAGE_SIZE
unsigned int page_size;
#endif
#endif
@@ -435,7 +438,7 @@ static inline void tlb_remove_page(struc
static inline void tlb_change_page_size(struct mmu_gather *tlb,
unsigned int page_size)
{
-#ifdef CONFIG_HAVE_MMU_GATHER_PAGE_SIZE
+#ifdef CONFIG_MMU_GATHER_PAGE_SIZE
if (tlb->page_size && tlb->page_size != page_size) {
if (!tlb->fullmm && !tlb->need_flush_all)
tlb_flush_mmu(tlb);
--- a/mm/mmu_gather.c~asm-generic-tlb-rename-have_mmu_gather_page_size
+++ a/mm/mmu_gather.c
@@ -69,7 +69,7 @@ bool __tlb_remove_page_size(struct mmu_g
VM_BUG_ON(!tlb->end);
-#ifdef CONFIG_HAVE_MMU_GATHER_PAGE_SIZE
+#ifdef CONFIG_MMU_GATHER_PAGE_SIZE
VM_WARN_ON(tlb->page_size != page_size);
#endif
@@ -223,7 +223,7 @@ void tlb_gather_mmu(struct mmu_gather *t
#ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
tlb->batch = NULL;
#endif
-#ifdef CONFIG_HAVE_MMU_GATHER_PAGE_SIZE
+#ifdef CONFIG_MMU_GATHER_PAGE_SIZE
tlb->page_size = 0;
#endif
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 55/67] asm-generic/tlb: rename HAVE_MMU_GATHER_NO_GATHER
2020-02-04 1:33 incoming Andrew Morton
` (53 preceding siblings ...)
2020-02-04 1:37 ` [patch 54/67] asm-generic/tlb: rename HAVE_MMU_GATHER_PAGE_SIZE Andrew Morton
@ 2020-02-04 1:37 ` Andrew Morton
2020-02-04 1:37 ` [patch 56/67] asm-generic/tlb: provide MMU_GATHER_TABLE_FREE Andrew Morton
` (14 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:37 UTC (permalink / raw)
To: akpm, aneesh.kumar, linux-mm, mm-commits, mpe, peterz, torvalds
From: Peter Zijlstra <peterz@infradead.org>
Subject: asm-generic/tlb: rename HAVE_MMU_GATHER_NO_GATHER
Towards a more consistent naming scheme.
Link: http://lkml.kernel.org/r/20200116064531.483522-9-aneesh.kumar@linux.ibm.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/Kconfig | 2 +-
arch/s390/Kconfig | 2 +-
include/asm-generic/tlb.h | 14 ++++++++++++--
mm/mmu_gather.c | 10 +++++-----
4 files changed, 19 insertions(+), 9 deletions(-)
--- a/arch/Kconfig~asm-generic-tlb-rename-have_mmu_gather_no_gather
+++ a/arch/Kconfig
@@ -402,7 +402,7 @@ config MMU_GATHER_PAGE_SIZE
config MMU_GATHER_NO_RANGE
bool
-config HAVE_MMU_GATHER_NO_GATHER
+config MMU_GATHER_NO_GATHER
bool
config ARCH_HAVE_NMI_SAFE_CMPXCHG
--- a/arch/s390/Kconfig~asm-generic-tlb-rename-have_mmu_gather_no_gather
+++ a/arch/s390/Kconfig
@@ -163,7 +163,7 @@ config S390
select HAVE_PERF_USER_STACK_DUMP
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_MEMBLOCK_PHYS_MAP
- select HAVE_MMU_GATHER_NO_GATHER
+ select MMU_GATHER_NO_GATHER
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_NOP_MCOUNT
select HAVE_OPROFILE
--- a/include/asm-generic/tlb.h~asm-generic-tlb-rename-have_mmu_gather_no_gather
+++ a/include/asm-generic/tlb.h
@@ -143,6 +143,16 @@
* MMU_GATHER_NO_RANGE
*
* Use this if your architecture lacks an efficient flush_tlb_range().
+ *
+ * MMU_GATHER_NO_GATHER
+ *
+ * If the option is set the mmu_gather will not track individual pages for
+ * delayed page free anymore. A platform that enables the option needs to
+ * provide its own implementation of the __tlb_remove_page_size() function to
+ * free pages.
+ *
+ * This is useful if your architecture already flushes TLB entries in the
+ * various ptep_get_and_clear() functions.
*/
#ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
@@ -202,7 +212,7 @@ extern void tlb_remove_table(struct mmu_
#endif /* CONFIG_MMU_GATHER_RCU_TABLE_FREE */
-#ifndef CONFIG_HAVE_MMU_GATHER_NO_GATHER
+#ifndef CONFIG_MMU_GATHER_NO_GATHER
/*
* If we can't allocate a page to make a big batch of page pointers
* to work on, then just handle a few from the on-stack structure.
@@ -277,7 +287,7 @@ struct mmu_gather {
unsigned int batch_count;
-#ifndef CONFIG_HAVE_MMU_GATHER_NO_GATHER
+#ifndef CONFIG_MMU_GATHER_NO_GATHER
struct mmu_gather_batch *active;
struct mmu_gather_batch local;
struct page *__pages[MMU_GATHER_BUNDLE];
--- a/mm/mmu_gather.c~asm-generic-tlb-rename-have_mmu_gather_no_gather
+++ a/mm/mmu_gather.c
@@ -11,7 +11,7 @@
#include <asm/pgalloc.h>
#include <asm/tlb.h>
-#ifndef CONFIG_HAVE_MMU_GATHER_NO_GATHER
+#ifndef CONFIG_MMU_GATHER_NO_GATHER
static bool tlb_next_batch(struct mmu_gather *tlb)
{
@@ -89,7 +89,7 @@ bool __tlb_remove_page_size(struct mmu_g
return false;
}
-#endif /* HAVE_MMU_GATHER_NO_GATHER */
+#endif /* MMU_GATHER_NO_GATHER */
#ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
@@ -180,7 +180,7 @@ static void tlb_flush_mmu_free(struct mm
#ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
tlb_table_flush(tlb);
#endif
-#ifndef CONFIG_HAVE_MMU_GATHER_NO_GATHER
+#ifndef CONFIG_MMU_GATHER_NO_GATHER
tlb_batch_pages_flush(tlb);
#endif
}
@@ -211,7 +211,7 @@ void tlb_gather_mmu(struct mmu_gather *t
/* Is it from 0 to ~0? */
tlb->fullmm = !(start | (end+1));
-#ifndef CONFIG_HAVE_MMU_GATHER_NO_GATHER
+#ifndef CONFIG_MMU_GATHER_NO_GATHER
tlb->need_flush_all = 0;
tlb->local.next = NULL;
tlb->local.nr = 0;
@@ -271,7 +271,7 @@ void tlb_finish_mmu(struct mmu_gather *t
tlb_flush_mmu(tlb);
-#ifndef CONFIG_HAVE_MMU_GATHER_NO_GATHER
+#ifndef CONFIG_MMU_GATHER_NO_GATHER
tlb_batch_list_free(tlb);
#endif
dec_tlb_flush_pending(tlb->mm);
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 56/67] asm-generic/tlb: provide MMU_GATHER_TABLE_FREE
2020-02-04 1:33 incoming Andrew Morton
` (54 preceding siblings ...)
2020-02-04 1:37 ` [patch 55/67] asm-generic/tlb: rename HAVE_MMU_GATHER_NO_GATHER Andrew Morton
@ 2020-02-04 1:37 ` Andrew Morton
2020-02-04 1:37 ` [patch 57/67] proc: decouple proc from VFS with "struct proc_ops" Andrew Morton
` (13 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:37 UTC (permalink / raw)
To: akpm, aneesh.kumar, linux-mm, mm-commits, mpe, peterz, torvalds
From: Peter Zijlstra <peterz@infradead.org>
Subject: asm-generic/tlb: provide MMU_GATHER_TABLE_FREE
As described in the comment, the correct order for freeing pages is:
1) unhook page
2) TLB invalidate page
3) free page
This order equally applies to page directories.
Currently there are two correct options:
- use tlb_remove_page(), when all page directores are full pages and
there are no futher contraints placed by things like software
walkers (HAVE_FAST_GUP).
- use MMU_GATHER_RCU_TABLE_FREE and tlb_remove_table() when the
architecture does not do IPI based TLB invalidate and has
HAVE_FAST_GUP (or software TLB fill).
This however leaves architectures that don't have page based directories
but don't need RCU in a bind. For those, provide MMU_GATHER_TABLE_FREE,
which provides the independent batching for directories without the
additional RCU freeing.
Link: http://lkml.kernel.org/r/20200116064531.483522-10-aneesh.kumar@linux.ibm.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/Kconfig | 5 +
arch/arm/include/asm/tlb.h | 4 -
include/asm-generic/tlb.h | 72 ++++++++++-----------
mm/mmu_gather.c | 120 +++++++++++++++++++++++++----------
4 files changed, 130 insertions(+), 71 deletions(-)
--- a/arch/arm/include/asm/tlb.h~asm-generic-tlb-provide-mmu_gather_table_free
+++ a/arch/arm/include/asm/tlb.h
@@ -37,10 +37,6 @@ static inline void __tlb_remove_table(vo
#include <asm-generic/tlb.h>
-#ifndef CONFIG_MMU_GATHER_RCU_TABLE_FREE
-#define tlb_remove_table(tlb, entry) tlb_remove_page(tlb, entry)
-#endif
-
static inline void
__pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, unsigned long addr)
{
--- a/arch/Kconfig~asm-generic-tlb-provide-mmu_gather_table_free
+++ a/arch/Kconfig
@@ -393,8 +393,12 @@ config HAVE_ARCH_JUMP_LABEL
config HAVE_ARCH_JUMP_LABEL_RELATIVE
bool
+config MMU_GATHER_TABLE_FREE
+ bool
+
config MMU_GATHER_RCU_TABLE_FREE
bool
+ select MMU_GATHER_TABLE_FREE
config MMU_GATHER_PAGE_SIZE
bool
@@ -404,6 +408,7 @@ config MMU_GATHER_NO_RANGE
config MMU_GATHER_NO_GATHER
bool
+ depends on MMU_GATHER_TABLE_FREE
config ARCH_HAVE_NMI_SAFE_CMPXCHG
bool
--- a/include/asm-generic/tlb.h~asm-generic-tlb-provide-mmu_gather_table_free
+++ a/include/asm-generic/tlb.h
@@ -56,6 +56,15 @@
* Defaults to flushing at tlb_end_vma() to reset the range; helps when
* there's large holes between the VMAs.
*
+ * - tlb_remove_table()
+ *
+ * tlb_remove_table() is the basic primitive to free page-table directories
+ * (__p*_free_tlb()). In it's most primitive form it is an alias for
+ * tlb_remove_page() below, for when page directories are pages and have no
+ * additional constraints.
+ *
+ * See also MMU_GATHER_TABLE_FREE and MMU_GATHER_RCU_TABLE_FREE.
+ *
* - tlb_remove_page() / __tlb_remove_page()
* - tlb_remove_page_size() / __tlb_remove_page_size()
*
@@ -129,17 +138,24 @@
* This might be useful if your architecture has size specific TLB
* invalidation instructions.
*
- * MMU_GATHER_RCU_TABLE_FREE
+ * MMU_GATHER_TABLE_FREE
*
* This provides tlb_remove_table(), to be used instead of tlb_remove_page()
- * for page directores (__p*_free_tlb()). This provides separate freeing of
- * the page-table pages themselves in a semi-RCU fashion (see comment below).
- * Useful if your architecture doesn't use IPIs for remote TLB invalidates
- * and therefore doesn't naturally serialize with software page-table walkers.
+ * for page directores (__p*_free_tlb()).
+ *
+ * Useful if your architecture has non-page page directories.
*
* When used, an architecture is expected to provide __tlb_remove_table()
* which does the actual freeing of these pages.
*
+ * MMU_GATHER_RCU_TABLE_FREE
+ *
+ * Like MMU_GATHER_TABLE_FREE, and adds semi-RCU semantics to the free (see
+ * comment below).
+ *
+ * Useful if your architecture doesn't use IPIs for remote TLB invalidates
+ * and therefore doesn't naturally serialize with software page-table walkers.
+ *
* MMU_GATHER_NO_RANGE
*
* Use this if your architecture lacks an efficient flush_tlb_range().
@@ -155,37 +171,12 @@
* various ptep_get_and_clear() functions.
*/
-#ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
-/*
- * Semi RCU freeing of the page directories.
- *
- * This is needed by some architectures to implement software pagetable walkers.
- *
- * gup_fast() and other software pagetable walkers do a lockless page-table
- * walk and therefore needs some synchronization with the freeing of the page
- * directories. The chosen means to accomplish that is by disabling IRQs over
- * the walk.
- *
- * Architectures that use IPIs to flush TLBs will then automagically DTRT,
- * since we unlink the page, flush TLBs, free the page. Since the disabling of
- * IRQs delays the completion of the TLB flush we can never observe an already
- * freed page.
- *
- * Architectures that do not have this (PPC) need to delay the freeing by some
- * other means, this is that means.
- *
- * What we do is batch the freed directory pages (tables) and RCU free them.
- * We use the sched RCU variant, as that guarantees that IRQ/preempt disabling
- * holds off grace periods.
- *
- * However, in order to batch these pages we need to allocate storage, this
- * allocation is deep inside the MM code and can thus easily fail on memory
- * pressure. To guarantee progress we fall back to single table freeing, see
- * the implementation of tlb_remove_table_one().
- *
- */
+#ifdef CONFIG_MMU_GATHER_TABLE_FREE
+
struct mmu_table_batch {
+#ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
struct rcu_head rcu;
+#endif
unsigned int nr;
void *tables[0];
};
@@ -195,6 +186,17 @@ struct mmu_table_batch {
extern void tlb_remove_table(struct mmu_gather *tlb, void *table);
+#else /* !CONFIG_MMU_GATHER_HAVE_TABLE_FREE */
+
+/*
+ * Without MMU_GATHER_TABLE_FREE the architecture is assumed to have page based
+ * page directories and we can use the normal page batching to free them.
+ */
+#define tlb_remove_table(tlb, page) tlb_remove_page((tlb), (page))
+
+#endif /* CONFIG_MMU_GATHER_TABLE_FREE */
+
+#ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
/*
* This allows an architecture that does not use the linux page-tables for
* hardware to skip the TLBI when freeing page tables.
@@ -248,7 +250,7 @@ extern bool __tlb_remove_page_size(struc
struct mmu_gather {
struct mm_struct *mm;
-#ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
+#ifdef CONFIG_MMU_GATHER_TABLE_FREE
struct mmu_table_batch *batch;
#endif
--- a/mm/mmu_gather.c~asm-generic-tlb-provide-mmu_gather_table_free
+++ a/mm/mmu_gather.c
@@ -91,56 +91,106 @@ bool __tlb_remove_page_size(struct mmu_g
#endif /* MMU_GATHER_NO_GATHER */
-#ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
+#ifdef CONFIG_MMU_GATHER_TABLE_FREE
-/*
- * See the comment near struct mmu_table_batch.
- */
+static void __tlb_remove_table_free(struct mmu_table_batch *batch)
+{
+ int i;
+
+ for (i = 0; i < batch->nr; i++)
+ __tlb_remove_table(batch->tables[i]);
+
+ free_page((unsigned long)batch);
+}
+
+#ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
/*
- * If we want tlb_remove_table() to imply TLB invalidates.
+ * Semi RCU freeing of the page directories.
+ *
+ * This is needed by some architectures to implement software pagetable walkers.
+ *
+ * gup_fast() and other software pagetable walkers do a lockless page-table
+ * walk and therefore needs some synchronization with the freeing of the page
+ * directories. The chosen means to accomplish that is by disabling IRQs over
+ * the walk.
+ *
+ * Architectures that use IPIs to flush TLBs will then automagically DTRT,
+ * since we unlink the page, flush TLBs, free the page. Since the disabling of
+ * IRQs delays the completion of the TLB flush we can never observe an already
+ * freed page.
+ *
+ * Architectures that do not have this (PPC) need to delay the freeing by some
+ * other means, this is that means.
+ *
+ * What we do is batch the freed directory pages (tables) and RCU free them.
+ * We use the sched RCU variant, as that guarantees that IRQ/preempt disabling
+ * holds off grace periods.
+ *
+ * However, in order to batch these pages we need to allocate storage, this
+ * allocation is deep inside the MM code and can thus easily fail on memory
+ * pressure. To guarantee progress we fall back to single table freeing, see
+ * the implementation of tlb_remove_table_one().
+ *
*/
-static inline void tlb_table_invalidate(struct mmu_gather *tlb)
-{
- if (tlb_needs_table_invalidate()) {
- /*
- * Invalidate page-table caches used by hardware walkers. Then
- * we still need to RCU-sched wait while freeing the pages
- * because software walkers can still be in-flight.
- */
- tlb_flush_mmu_tlbonly(tlb);
- }
-}
static void tlb_remove_table_smp_sync(void *arg)
{
/* Simply deliver the interrupt */
}
-static void tlb_remove_table_one(void *table)
+static void tlb_remove_table_sync_one(void)
{
/*
* This isn't an RCU grace period and hence the page-tables cannot be
* assumed to be actually RCU-freed.
*
* It is however sufficient for software page-table walkers that rely on
- * IRQ disabling. See the comment near struct mmu_table_batch.
+ * IRQ disabling.
*/
smp_call_function(tlb_remove_table_smp_sync, NULL, 1);
- __tlb_remove_table(table);
}
static void tlb_remove_table_rcu(struct rcu_head *head)
{
- struct mmu_table_batch *batch;
- int i;
+ __tlb_remove_table_free(container_of(head, struct mmu_table_batch, rcu));
+}
- batch = container_of(head, struct mmu_table_batch, rcu);
+static void tlb_remove_table_free(struct mmu_table_batch *batch)
+{
+ call_rcu(&batch->rcu, tlb_remove_table_rcu);
+}
- for (i = 0; i < batch->nr; i++)
- __tlb_remove_table(batch->tables[i]);
+#else /* !CONFIG_MMU_GATHER_RCU_TABLE_FREE */
- free_page((unsigned long)batch);
+static void tlb_remove_table_sync_one(void) { }
+
+static void tlb_remove_table_free(struct mmu_table_batch *batch)
+{
+ __tlb_remove_table_free(batch);
+}
+
+#endif /* CONFIG_MMU_GATHER_RCU_TABLE_FREE */
+
+/*
+ * If we want tlb_remove_table() to imply TLB invalidates.
+ */
+static inline void tlb_table_invalidate(struct mmu_gather *tlb)
+{
+ if (tlb_needs_table_invalidate()) {
+ /*
+ * Invalidate page-table caches used by hardware walkers. Then
+ * we still need to RCU-sched wait while freeing the pages
+ * because software walkers can still be in-flight.
+ */
+ tlb_flush_mmu_tlbonly(tlb);
+ }
+}
+
+static void tlb_remove_table_one(void *table)
+{
+ tlb_remove_table_sync_one();
+ __tlb_remove_table(table);
}
static void tlb_table_flush(struct mmu_gather *tlb)
@@ -149,7 +199,7 @@ static void tlb_table_flush(struct mmu_g
if (*batch) {
tlb_table_invalidate(tlb);
- call_rcu(&(*batch)->rcu, tlb_remove_table_rcu);
+ tlb_remove_table_free(*batch);
*batch = NULL;
}
}
@@ -173,13 +223,21 @@ void tlb_remove_table(struct mmu_gather
tlb_table_flush(tlb);
}
-#endif /* CONFIG_MMU_GATHER_RCU_TABLE_FREE */
+static inline void tlb_table_init(struct mmu_gather *tlb)
+{
+ tlb->batch = NULL;
+}
+
+#else /* !CONFIG_MMU_GATHER_TABLE_FREE */
+
+static inline void tlb_table_flush(struct mmu_gather *tlb) { }
+static inline void tlb_table_init(struct mmu_gather *tlb) { }
+
+#endif /* CONFIG_MMU_GATHER_TABLE_FREE */
static void tlb_flush_mmu_free(struct mmu_gather *tlb)
{
-#ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
tlb_table_flush(tlb);
-#endif
#ifndef CONFIG_MMU_GATHER_NO_GATHER
tlb_batch_pages_flush(tlb);
#endif
@@ -220,9 +278,7 @@ void tlb_gather_mmu(struct mmu_gather *t
tlb->batch_count = 0;
#endif
-#ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
- tlb->batch = NULL;
-#endif
+ tlb_table_init(tlb);
#ifdef CONFIG_MMU_GATHER_PAGE_SIZE
tlb->page_size = 0;
#endif
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 57/67] proc: decouple proc from VFS with "struct proc_ops"
2020-02-04 1:33 incoming Andrew Morton
` (55 preceding siblings ...)
2020-02-04 1:37 ` [patch 56/67] asm-generic/tlb: provide MMU_GATHER_TABLE_FREE Andrew Morton
@ 2020-02-04 1:37 ` Andrew Morton
2020-02-04 1:37 ` [patch 58/67] proc: convert everything to " Andrew Morton
` (12 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:37 UTC (permalink / raw)
To: adobriyan, akpm, linux-mm, mm-commits, torvalds
From: Alexey Dobriyan <adobriyan@gmail.com>
Subject: proc: decouple proc from VFS with "struct proc_ops"
Currently core /proc code uses "struct file_operations" for custom hooks,
however, VFS doesn't directly call them. Every time VFS expands
file_operations hook set, /proc code bloats for no reason.
Introduce "struct proc_ops" which contains only those hooks which /proc
allows to call into (open, release, read, write, ioctl, mmap, poll). It
doesn't contain module pointer as well.
Save ~184 bytes per usage:
add/remove: 26/26 grow/shrink: 1/4 up/down: 1922/-6674 (-4752)
Function old new delta
sysvipc_proc_ops - 72 +72
...
config_gz_proc_ops - 72 +72
proc_get_inode 289 339 +50
proc_reg_get_unmapped_area 110 107 -3
close_pdeo 227 224 -3
proc_reg_open 289 284 -5
proc_create_data 60 53 -7
rt_cpu_seq_fops 256 - -256
...
default_affinity_proc_fops 256 - -256
Total: Before=5430095, After=5425343, chg -0.09%
Link: http://lkml.kernel.org/r/20191225172228.GA13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
fs/proc/generic.c | 38 +++++++++----------
fs/proc/inode.c | 76 +++++++++++++++++++-------------------
fs/proc/internal.h | 5 ++
fs/proc/proc_net.c | 32 ++++++++--------
fs/proc/proc_sysctl.c | 2 -
fs/proc/root.c | 2 -
include/linux/proc_fs.h | 23 +++++++++--
7 files changed, 98 insertions(+), 80 deletions(-)
--- a/fs/proc/generic.c~proc-decouple-proc-from-vfs-with-struct-proc_ops
+++ a/fs/proc/generic.c
@@ -473,7 +473,7 @@ struct proc_dir_entry *proc_mkdir_data(c
ent = __proc_create(&parent, name, S_IFDIR | mode, 2);
if (ent) {
ent->data = data;
- ent->proc_fops = &proc_dir_operations;
+ ent->proc_dir_ops = &proc_dir_operations;
ent->proc_iops = &proc_dir_inode_operations;
ent = proc_register(parent, ent);
}
@@ -503,7 +503,7 @@ struct proc_dir_entry *proc_create_mount
ent = __proc_create(&parent, name, mode, 2);
if (ent) {
ent->data = NULL;
- ent->proc_fops = NULL;
+ ent->proc_dir_ops = NULL;
ent->proc_iops = NULL;
ent = proc_register(parent, ent);
}
@@ -533,25 +533,23 @@ struct proc_dir_entry *proc_create_reg(c
struct proc_dir_entry *proc_create_data(const char *name, umode_t mode,
struct proc_dir_entry *parent,
- const struct file_operations *proc_fops, void *data)
+ const struct proc_ops *proc_ops, void *data)
{
struct proc_dir_entry *p;
- BUG_ON(proc_fops == NULL);
-
p = proc_create_reg(name, mode, &parent, data);
if (!p)
return NULL;
- p->proc_fops = proc_fops;
+ p->proc_ops = proc_ops;
return proc_register(parent, p);
}
EXPORT_SYMBOL(proc_create_data);
struct proc_dir_entry *proc_create(const char *name, umode_t mode,
struct proc_dir_entry *parent,
- const struct file_operations *proc_fops)
+ const struct proc_ops *proc_ops)
{
- return proc_create_data(name, mode, parent, proc_fops, NULL);
+ return proc_create_data(name, mode, parent, proc_ops, NULL);
}
EXPORT_SYMBOL(proc_create);
@@ -573,11 +571,11 @@ static int proc_seq_release(struct inode
return seq_release(inode, file);
}
-static const struct file_operations proc_seq_fops = {
- .open = proc_seq_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = proc_seq_release,
+static const struct proc_ops proc_seq_ops = {
+ .proc_open = proc_seq_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = proc_seq_release,
};
struct proc_dir_entry *proc_create_seq_private(const char *name, umode_t mode,
@@ -589,7 +587,7 @@ struct proc_dir_entry *proc_create_seq_p
p = proc_create_reg(name, mode, &parent, data);
if (!p)
return NULL;
- p->proc_fops = &proc_seq_fops;
+ p->proc_ops = &proc_seq_ops;
p->seq_ops = ops;
p->state_size = state_size;
return proc_register(parent, p);
@@ -603,11 +601,11 @@ static int proc_single_open(struct inode
return single_open(file, de->single_show, de->data);
}
-static const struct file_operations proc_single_fops = {
- .open = proc_single_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
+static const struct proc_ops proc_single_ops = {
+ .proc_open = proc_single_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
};
struct proc_dir_entry *proc_create_single_data(const char *name, umode_t mode,
@@ -619,7 +617,7 @@ struct proc_dir_entry *proc_create_singl
p = proc_create_reg(name, mode, &parent, data);
if (!p)
return NULL;
- p->proc_fops = &proc_single_fops;
+ p->proc_ops = &proc_single_ops;
p->single_show = show;
return proc_register(parent, p);
}
--- a/fs/proc/inode.c~proc-decouple-proc-from-vfs-with-struct-proc_ops
+++ a/fs/proc/inode.c
@@ -163,7 +163,7 @@ static void close_pdeo(struct proc_dir_e
pdeo->closing = true;
spin_unlock(&pde->pde_unload_lock);
file = pdeo->file;
- pde->proc_fops->release(file_inode(file), file);
+ pde->proc_ops->proc_release(file_inode(file), file);
spin_lock(&pde->pde_unload_lock);
/* After ->release. */
list_del(&pdeo->lh);
@@ -200,12 +200,12 @@ static loff_t proc_reg_llseek(struct fil
struct proc_dir_entry *pde = PDE(file_inode(file));
loff_t rv = -EINVAL;
if (use_pde(pde)) {
- typeof_member(struct file_operations, llseek) llseek;
+ typeof_member(struct proc_ops, proc_lseek) lseek;
- llseek = pde->proc_fops->llseek;
- if (!llseek)
- llseek = default_llseek;
- rv = llseek(file, offset, whence);
+ lseek = pde->proc_ops->proc_lseek;
+ if (!lseek)
+ lseek = default_llseek;
+ rv = lseek(file, offset, whence);
unuse_pde(pde);
}
return rv;
@@ -216,9 +216,9 @@ static ssize_t proc_reg_read(struct file
struct proc_dir_entry *pde = PDE(file_inode(file));
ssize_t rv = -EIO;
if (use_pde(pde)) {
- typeof_member(struct file_operations, read) read;
+ typeof_member(struct proc_ops, proc_read) read;
- read = pde->proc_fops->read;
+ read = pde->proc_ops->proc_read;
if (read)
rv = read(file, buf, count, ppos);
unuse_pde(pde);
@@ -231,9 +231,9 @@ static ssize_t proc_reg_write(struct fil
struct proc_dir_entry *pde = PDE(file_inode(file));
ssize_t rv = -EIO;
if (use_pde(pde)) {
- typeof_member(struct file_operations, write) write;
+ typeof_member(struct proc_ops, proc_write) write;
- write = pde->proc_fops->write;
+ write = pde->proc_ops->proc_write;
if (write)
rv = write(file, buf, count, ppos);
unuse_pde(pde);
@@ -246,9 +246,9 @@ static __poll_t proc_reg_poll(struct fil
struct proc_dir_entry *pde = PDE(file_inode(file));
__poll_t rv = DEFAULT_POLLMASK;
if (use_pde(pde)) {
- typeof_member(struct file_operations, poll) poll;
+ typeof_member(struct proc_ops, proc_poll) poll;
- poll = pde->proc_fops->poll;
+ poll = pde->proc_ops->proc_poll;
if (poll)
rv = poll(file, pts);
unuse_pde(pde);
@@ -261,9 +261,9 @@ static long proc_reg_unlocked_ioctl(stru
struct proc_dir_entry *pde = PDE(file_inode(file));
long rv = -ENOTTY;
if (use_pde(pde)) {
- typeof_member(struct file_operations, unlocked_ioctl) ioctl;
+ typeof_member(struct proc_ops, proc_ioctl) ioctl;
- ioctl = pde->proc_fops->unlocked_ioctl;
+ ioctl = pde->proc_ops->proc_ioctl;
if (ioctl)
rv = ioctl(file, cmd, arg);
unuse_pde(pde);
@@ -277,9 +277,9 @@ static long proc_reg_compat_ioctl(struct
struct proc_dir_entry *pde = PDE(file_inode(file));
long rv = -ENOTTY;
if (use_pde(pde)) {
- typeof_member(struct file_operations, compat_ioctl) compat_ioctl;
+ typeof_member(struct proc_ops, proc_compat_ioctl) compat_ioctl;
- compat_ioctl = pde->proc_fops->compat_ioctl;
+ compat_ioctl = pde->proc_ops->proc_compat_ioctl;
if (compat_ioctl)
rv = compat_ioctl(file, cmd, arg);
unuse_pde(pde);
@@ -293,9 +293,9 @@ static int proc_reg_mmap(struct file *fi
struct proc_dir_entry *pde = PDE(file_inode(file));
int rv = -EIO;
if (use_pde(pde)) {
- typeof_member(struct file_operations, mmap) mmap;
+ typeof_member(struct proc_ops, proc_mmap) mmap;
- mmap = pde->proc_fops->mmap;
+ mmap = pde->proc_ops->proc_mmap;
if (mmap)
rv = mmap(file, vma);
unuse_pde(pde);
@@ -312,9 +312,9 @@ proc_reg_get_unmapped_area(struct file *
unsigned long rv = -EIO;
if (use_pde(pde)) {
- typeof_member(struct file_operations, get_unmapped_area) get_area;
+ typeof_member(struct proc_ops, proc_get_unmapped_area) get_area;
- get_area = pde->proc_fops->get_unmapped_area;
+ get_area = pde->proc_ops->proc_get_unmapped_area;
#ifdef CONFIG_MMU
if (!get_area)
get_area = current->mm->get_unmapped_area;
@@ -333,8 +333,8 @@ static int proc_reg_open(struct inode *i
{
struct proc_dir_entry *pde = PDE(inode);
int rv = 0;
- typeof_member(struct file_operations, open) open;
- typeof_member(struct file_operations, release) release;
+ typeof_member(struct proc_ops, proc_open) open;
+ typeof_member(struct proc_ops, proc_release) release;
struct pde_opener *pdeo;
/*
@@ -351,7 +351,7 @@ static int proc_reg_open(struct inode *i
if (!use_pde(pde))
return -ENOENT;
- release = pde->proc_fops->release;
+ release = pde->proc_ops->proc_release;
if (release) {
pdeo = kmem_cache_alloc(pde_opener_cache, GFP_KERNEL);
if (!pdeo) {
@@ -360,7 +360,7 @@ static int proc_reg_open(struct inode *i
}
}
- open = pde->proc_fops->open;
+ open = pde->proc_ops->proc_open;
if (open)
rv = open(inode, file);
@@ -468,21 +468,23 @@ struct inode *proc_get_inode(struct supe
inode->i_size = de->size;
if (de->nlink)
set_nlink(inode, de->nlink);
- WARN_ON(!de->proc_iops);
- inode->i_op = de->proc_iops;
- if (de->proc_fops) {
- if (S_ISREG(inode->i_mode)) {
+
+ if (S_ISREG(inode->i_mode)) {
+ inode->i_op = de->proc_iops;
+ inode->i_fop = &proc_reg_file_ops;
#ifdef CONFIG_COMPAT
- if (!de->proc_fops->compat_ioctl)
- inode->i_fop =
- &proc_reg_file_ops_no_compat;
- else
-#endif
- inode->i_fop = &proc_reg_file_ops;
- } else {
- inode->i_fop = de->proc_fops;
+ if (!de->proc_ops->proc_compat_ioctl) {
+ inode->i_fop = &proc_reg_file_ops_no_compat;
}
- }
+#endif
+ } else if (S_ISDIR(inode->i_mode)) {
+ inode->i_op = de->proc_iops;
+ inode->i_fop = de->proc_dir_ops;
+ } else if (S_ISLNK(inode->i_mode)) {
+ inode->i_op = de->proc_iops;
+ inode->i_fop = NULL;
+ } else
+ BUG();
} else
pde_put(de);
return inode;
--- a/fs/proc/internal.h~proc-decouple-proc-from-vfs-with-struct-proc_ops
+++ a/fs/proc/internal.h
@@ -39,7 +39,10 @@ struct proc_dir_entry {
spinlock_t pde_unload_lock;
struct completion *pde_unload_completion;
const struct inode_operations *proc_iops;
- const struct file_operations *proc_fops;
+ union {
+ const struct proc_ops *proc_ops;
+ const struct file_operations *proc_dir_ops;
+ };
const struct dentry_operations *proc_dops;
union {
const struct seq_operations *seq_ops;
--- a/fs/proc/proc_net.c~proc-decouple-proc-from-vfs-with-struct-proc_ops
+++ a/fs/proc/proc_net.c
@@ -90,12 +90,12 @@ static int seq_release_net(struct inode
return 0;
}
-static const struct file_operations proc_net_seq_fops = {
- .open = seq_open_net,
- .read = seq_read,
- .write = proc_simple_write,
- .llseek = seq_lseek,
- .release = seq_release_net,
+static const struct proc_ops proc_net_seq_ops = {
+ .proc_open = seq_open_net,
+ .proc_read = seq_read,
+ .proc_write = proc_simple_write,
+ .proc_lseek = seq_lseek,
+ .proc_release = seq_release_net,
};
struct proc_dir_entry *proc_create_net_data(const char *name, umode_t mode,
@@ -108,7 +108,7 @@ struct proc_dir_entry *proc_create_net_d
if (!p)
return NULL;
pde_force_lookup(p);
- p->proc_fops = &proc_net_seq_fops;
+ p->proc_ops = &proc_net_seq_ops;
p->seq_ops = ops;
p->state_size = state_size;
return proc_register(parent, p);
@@ -152,7 +152,7 @@ struct proc_dir_entry *proc_create_net_d
if (!p)
return NULL;
pde_force_lookup(p);
- p->proc_fops = &proc_net_seq_fops;
+ p->proc_ops = &proc_net_seq_ops;
p->seq_ops = ops;
p->state_size = state_size;
p->write = write;
@@ -183,12 +183,12 @@ static int single_release_net(struct ino
return single_release(ino, f);
}
-static const struct file_operations proc_net_single_fops = {
- .open = single_open_net,
- .read = seq_read,
- .write = proc_simple_write,
- .llseek = seq_lseek,
- .release = single_release_net,
+static const struct proc_ops proc_net_single_ops = {
+ .proc_open = single_open_net,
+ .proc_read = seq_read,
+ .proc_write = proc_simple_write,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release_net,
};
struct proc_dir_entry *proc_create_net_single(const char *name, umode_t mode,
@@ -201,7 +201,7 @@ struct proc_dir_entry *proc_create_net_s
if (!p)
return NULL;
pde_force_lookup(p);
- p->proc_fops = &proc_net_single_fops;
+ p->proc_ops = &proc_net_single_ops;
p->single_show = show;
return proc_register(parent, p);
}
@@ -244,7 +244,7 @@ struct proc_dir_entry *proc_create_net_s
if (!p)
return NULL;
pde_force_lookup(p);
- p->proc_fops = &proc_net_single_fops;
+ p->proc_ops = &proc_net_single_ops;
p->single_show = show;
p->write = write;
return proc_register(parent, p);
--- a/fs/proc/proc_sysctl.c~proc-decouple-proc-from-vfs-with-struct-proc_ops
+++ a/fs/proc/proc_sysctl.c
@@ -1720,7 +1720,7 @@ int __init proc_sys_init(void)
proc_sys_root = proc_mkdir("sys", NULL);
proc_sys_root->proc_iops = &proc_sys_dir_operations;
- proc_sys_root->proc_fops = &proc_sys_dir_file_operations;
+ proc_sys_root->proc_dir_ops = &proc_sys_dir_file_operations;
proc_sys_root->nlink = 0;
return sysctl_init();
--- a/fs/proc/root.c~proc-decouple-proc-from-vfs-with-struct-proc_ops
+++ a/fs/proc/root.c
@@ -292,7 +292,7 @@ struct proc_dir_entry proc_root = {
.nlink = 2,
.refcnt = REFCOUNT_INIT(1),
.proc_iops = &proc_root_inode_operations,
- .proc_fops = &proc_root_operations,
+ .proc_dir_ops = &proc_root_operations,
.parent = &proc_root,
.subdir = RB_ROOT,
.name = "/proc",
--- a/include/linux/proc_fs.h~proc-decouple-proc-from-vfs-with-struct-proc_ops
+++ a/include/linux/proc_fs.h
@@ -12,6 +12,21 @@ struct proc_dir_entry;
struct seq_file;
struct seq_operations;
+struct proc_ops {
+ int (*proc_open)(struct inode *, struct file *);
+ ssize_t (*proc_read)(struct file *, char __user *, size_t, loff_t *);
+ ssize_t (*proc_write)(struct file *, const char __user *, size_t, loff_t *);
+ loff_t (*proc_lseek)(struct file *, loff_t, int);
+ int (*proc_release)(struct inode *, struct file *);
+ __poll_t (*proc_poll)(struct file *, struct poll_table_struct *);
+ long (*proc_ioctl)(struct file *, unsigned int, unsigned long);
+#ifdef CONFIG_COMPAT
+ long (*proc_compat_ioctl)(struct file *, unsigned int, unsigned long);
+#endif
+ int (*proc_mmap)(struct file *, struct vm_area_struct *);
+ unsigned long (*proc_get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
+};
+
#ifdef CONFIG_PROC_FS
typedef int (*proc_write_t)(struct file *, char *, size_t);
@@ -43,10 +58,10 @@ struct proc_dir_entry *proc_create_singl
extern struct proc_dir_entry *proc_create_data(const char *, umode_t,
struct proc_dir_entry *,
- const struct file_operations *,
+ const struct proc_ops *,
void *);
-struct proc_dir_entry *proc_create(const char *name, umode_t mode, struct proc_dir_entry *parent, const struct file_operations *proc_fops);
+struct proc_dir_entry *proc_create(const char *name, umode_t mode, struct proc_dir_entry *parent, const struct proc_ops *proc_ops);
extern void proc_set_size(struct proc_dir_entry *, loff_t);
extern void proc_set_user(struct proc_dir_entry *, kuid_t, kgid_t);
extern void *PDE_DATA(const struct inode *);
@@ -108,8 +123,8 @@ static inline struct proc_dir_entry *pro
#define proc_create_seq(name, mode, parent, ops) ({NULL;})
#define proc_create_single(name, mode, parent, show) ({NULL;})
#define proc_create_single_data(name, mode, parent, show, data) ({NULL;})
-#define proc_create(name, mode, parent, proc_fops) ({NULL;})
-#define proc_create_data(name, mode, parent, proc_fops, data) ({NULL;})
+#define proc_create(name, mode, parent, proc_ops) ({NULL;})
+#define proc_create_data(name, mode, parent, proc_ops, data) ({NULL;})
static inline void proc_set_size(struct proc_dir_entry *de, loff_t size) {}
static inline void proc_set_user(struct proc_dir_entry *de, kuid_t uid, kgid_t gid) {}
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 58/67] proc: convert everything to "struct proc_ops"
2020-02-04 1:33 incoming Andrew Morton
` (56 preceding siblings ...)
2020-02-04 1:37 ` [patch 57/67] proc: decouple proc from VFS with "struct proc_ops" Andrew Morton
@ 2020-02-04 1:37 ` Andrew Morton
2020-02-04 1:37 ` [patch 59/67] lib/string: add strnchrnul() Andrew Morton
` (11 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:37 UTC (permalink / raw)
To: adobriyan, akpm, linux-mm, mm-commits, sfr, torvalds
From: Alexey Dobriyan <adobriyan@gmail.com>
Subject: proc: convert everything to "struct proc_ops"
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in
seq_file.h.
Conversion rule is:
llseek => proc_lseek
unlocked_ioctl => proc_ioctl
xxx => proc_xxx
delete ".owner = THIS_MODULE" line
[akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c]
[sfr@canb.auug.org.au: fix kernel/sched/psi.c]
Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au
Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/alpha/kernel/srm_env.c | 17 -
arch/arm/kernel/atags_proc.c | 8
arch/arm/mm/alignment.c | 14 -
arch/ia64/kernel/salinfo.c | 24 -
arch/m68k/kernel/bootinfo_proc.c | 8
arch/mips/lasat/picvue_proc.c | 31 +-
arch/powerpc/kernel/proc_powerpc.c | 10
arch/powerpc/kernel/rtas-proc.c | 70 ++---
arch/powerpc/kernel/rtas_flash.c | 34 +-
arch/powerpc/kernel/rtasd.c | 14 -
arch/powerpc/mm/numa.c | 12
arch/powerpc/platforms/pseries/lpar.c | 24 -
arch/powerpc/platforms/pseries/lparcfg.c | 14 -
arch/powerpc/platforms/pseries/reconfig.c | 8
arch/powerpc/platforms/pseries/scanlog.c | 15 -
arch/sh/mm/alignment.c | 17 -
arch/sparc/kernel/led.c | 15 -
arch/um/drivers/mconsole_kern.c | 9
arch/um/kernel/exitcode.c | 15 -
arch/um/kernel/process.c | 15 -
arch/x86/kernel/cpu/mtrr/if.c | 21 -
arch/x86/platform/uv/tlb_uv.c | 14 -
arch/xtensa/platforms/iss/simdisk.c | 10
drivers/acpi/battery.c | 15 -
drivers/acpi/proc.c | 15 -
drivers/hwmon/dell-smm-hwmon.c | 15 -
drivers/ide/ide-proc.c | 19 -
drivers/input/input.c | 28 +-
drivers/isdn/capi/kcapi_proc.c | 6
drivers/macintosh/via-pmu.c | 17 -
drivers/md/md.c | 15 -
drivers/misc/sgi-gru/gruprocfs.c | 42 +--
drivers/net/wireless/cisco/airo.c | 126 ++++------
drivers/net/wireless/intel/ipw2x00/libipw_module.c | 15 -
drivers/net/wireless/intersil/hostap/hostap_hw.c | 4
drivers/net/wireless/intersil/hostap/hostap_proc.c | 14 -
drivers/net/wireless/intersil/hostap/hostap_wlan.h | 2
drivers/net/wireless/ray_cs.c | 20 -
drivers/parisc/led.c | 17 -
drivers/pci/proc.c | 25 +
drivers/platform/x86/thinkpad_acpi.c | 15 -
drivers/platform/x86/toshiba_acpi.c | 60 ++--
drivers/pnp/isapnp/proc.c | 9
drivers/pnp/pnpbios/proc.c | 17 -
drivers/s390/block/dasd_proc.c | 15 -
drivers/s390/cio/blacklist.c | 14 -
drivers/s390/cio/css.c | 11
drivers/scsi/esas2r/esas2r_main.c | 9
drivers/scsi/scsi_devinfo.c | 15 -
drivers/scsi/scsi_proc.c | 29 +-
drivers/scsi/sg.c | 30 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_module.c | 14 -
drivers/tty/sysrq.c | 8
drivers/usb/gadget/function/rndis.c | 17 -
drivers/video/fbdev/via/viafbdev.c | 105 +++-----
drivers/zorro/proc.c | 9
fs/cifs/cifs_debug.c | 108 ++++----
fs/cifs/dfs_cache.c | 13 -
fs/cifs/dfs_cache.h | 2
fs/fscache/internal.h | 2
fs/fscache/object-list.c | 11
fs/fscache/proc.c | 2
fs/jbd2/journal.c | 13 -
fs/jfs/jfs_debug.c | 14 -
fs/lockd/procfs.c | 12
fs/nfsd/nfsctl.c | 13 -
fs/nfsd/stats.c | 12
fs/proc/cpuinfo.c | 12
fs/proc/kcore.c | 13 -
fs/proc/kmsg.c | 14 -
fs/proc/page.c | 24 -
fs/proc/stat.c | 12
fs/proc/vmcore.c | 10
include/linux/seq_file.h | 13 +
include/linux/sunrpc/stats.h | 4
ipc/util.c | 14 -
kernel/configs.c | 9
kernel/irq/proc.c | 42 +--
kernel/kallsyms.c | 12
kernel/latencytop.c | 14 -
kernel/locking/lockdep_proc.c | 15 -
kernel/module.c | 12
kernel/profile.c | 24 -
kernel/sched/psi.c | 48 +--
mm/slab_common.c | 15 -
mm/swapfile.c | 14 -
net/atm/mpoa_proc.c | 17 -
net/atm/proc.c | 8
net/core/pktgen.c | 44 +--
net/ipv4/ipconfig.c | 10
net/ipv4/netfilter/ipt_CLUSTERIP.c | 16 -
net/ipv4/route.c | 24 -
net/netfilter/xt_recent.c | 17 -
net/sunrpc/auth_gss/svcauth_gss.c | 10
net/sunrpc/cache.c | 45 +--
net/sunrpc/stats.c | 21 -
samples/kfifo/bytestream-example.c | 11
samples/kfifo/inttype-example.c | 11
samples/kfifo/record-example.c | 11
sound/core/info.c | 34 +-
100 files changed, 974 insertions(+), 1019 deletions(-)
--- a/arch/alpha/kernel/srm_env.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/alpha/kernel/srm_env.c
@@ -119,13 +119,12 @@ static ssize_t srm_env_proc_write(struct
return res;
}
-static const struct file_operations srm_env_proc_fops = {
- .owner = THIS_MODULE,
- .open = srm_env_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = srm_env_proc_write,
+static const struct proc_ops srm_env_proc_ops = {
+ .proc_open = srm_env_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = srm_env_proc_write,
};
static int __init
@@ -182,7 +181,7 @@ srm_env_init(void)
entry = srm_named_entries;
while (entry->name && entry->id) {
if (!proc_create_data(entry->name, 0644, named_dir,
- &srm_env_proc_fops, (void *)entry->id))
+ &srm_env_proc_ops, (void *)entry->id))
goto cleanup;
entry++;
}
@@ -194,7 +193,7 @@ srm_env_init(void)
char name[4];
sprintf(name, "%ld", var_num);
if (!proc_create_data(name, 0644, numbered_dir,
- &srm_env_proc_fops, (void *)var_num))
+ &srm_env_proc_ops, (void *)var_num))
goto cleanup;
}
--- a/arch/arm/kernel/atags_proc.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/arm/kernel/atags_proc.c
@@ -17,9 +17,9 @@ static ssize_t atags_read(struct file *f
return simple_read_from_buffer(buf, count, ppos, b->data, b->size);
}
-static const struct file_operations atags_fops = {
- .read = atags_read,
- .llseek = default_llseek,
+static const struct proc_ops atags_proc_ops = {
+ .proc_read = atags_read,
+ .proc_lseek = default_llseek,
};
#define BOOT_PARAMS_SIZE 1536
@@ -61,7 +61,7 @@ static int __init init_atags_procfs(void
b->size = size;
memcpy(b->data, atags_copy, size);
- tags_entry = proc_create_data("atags", 0400, NULL, &atags_fops, b);
+ tags_entry = proc_create_data("atags", 0400, NULL, &atags_proc_ops, b);
if (!tags_entry)
goto nomem;
--- a/arch/arm/mm/alignment.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/arm/mm/alignment.c
@@ -162,12 +162,12 @@ static ssize_t alignment_proc_write(stru
return count;
}
-static const struct file_operations alignment_proc_fops = {
- .open = alignment_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = alignment_proc_write,
+static const struct proc_ops alignment_proc_ops = {
+ .proc_open = alignment_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = alignment_proc_write,
};
#endif /* CONFIG_PROC_FS */
@@ -1016,7 +1016,7 @@ static int __init alignment_init(void)
struct proc_dir_entry *res;
res = proc_create("cpu/alignment", S_IWUSR | S_IRUGO, NULL,
- &alignment_proc_fops);
+ &alignment_proc_ops);
if (!res)
return -ENOMEM;
#endif
--- a/arch/ia64/kernel/salinfo.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/ia64/kernel/salinfo.c
@@ -331,10 +331,10 @@ retry:
return size;
}
-static const struct file_operations salinfo_event_fops = {
- .open = salinfo_event_open,
- .read = salinfo_event_read,
- .llseek = noop_llseek,
+static const struct proc_ops salinfo_event_proc_ops = {
+ .proc_open = salinfo_event_open,
+ .proc_read = salinfo_event_read,
+ .proc_lseek = noop_llseek,
};
static int
@@ -534,12 +534,12 @@ salinfo_log_write(struct file *file, con
return count;
}
-static const struct file_operations salinfo_data_fops = {
- .open = salinfo_log_open,
- .release = salinfo_log_release,
- .read = salinfo_log_read,
- .write = salinfo_log_write,
- .llseek = default_llseek,
+static const struct proc_ops salinfo_data_proc_ops = {
+ .proc_open = salinfo_log_open,
+ .proc_release = salinfo_log_release,
+ .proc_read = salinfo_log_read,
+ .proc_write = salinfo_log_write,
+ .proc_lseek = default_llseek,
};
static int salinfo_cpu_online(unsigned int cpu)
@@ -617,13 +617,13 @@ salinfo_init(void)
continue;
entry = proc_create_data("event", S_IRUSR, dir,
- &salinfo_event_fops, data);
+ &salinfo_event_proc_ops, data);
if (!entry)
continue;
*sdir++ = entry;
entry = proc_create_data("data", S_IRUSR | S_IWUSR, dir,
- &salinfo_data_fops, data);
+ &salinfo_data_proc_ops, data);
if (!entry)
continue;
*sdir++ = entry;
--- a/arch/m68k/kernel/bootinfo_proc.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/m68k/kernel/bootinfo_proc.c
@@ -26,9 +26,9 @@ static ssize_t bootinfo_read(struct file
bootinfo_size);
}
-static const struct file_operations bootinfo_fops = {
- .read = bootinfo_read,
- .llseek = default_llseek,
+static const struct proc_ops bootinfo_proc_ops = {
+ .proc_read = bootinfo_read,
+ .proc_lseek = default_llseek,
};
void __init save_bootinfo(const struct bi_record *bi)
@@ -67,7 +67,7 @@ static int __init init_bootinfo_procfs(v
if (!bootinfo_copy)
return -ENOMEM;
- pde = proc_create_data("bootinfo", 0400, NULL, &bootinfo_fops, NULL);
+ pde = proc_create_data("bootinfo", 0400, NULL, &bootinfo_proc_ops, NULL);
if (!pde) {
kfree(bootinfo_copy);
return -ENOMEM;
--- a/arch/mips/lasat/picvue_proc.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/mips/lasat/picvue_proc.c
@@ -89,13 +89,12 @@ static ssize_t pvc_line_proc_write(struc
return count;
}
-static const struct file_operations pvc_line_proc_fops = {
- .owner = THIS_MODULE,
- .open = pvc_line_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = pvc_line_proc_write,
+static const struct proc_ops pvc_line_proc_ops = {
+ .proc_open = pvc_line_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = pvc_line_proc_write,
};
static ssize_t pvc_scroll_proc_write(struct file *file, const char __user *buf,
@@ -148,13 +147,12 @@ static int pvc_scroll_proc_open(struct i
return single_open(file, pvc_scroll_proc_show, NULL);
}
-static const struct file_operations pvc_scroll_proc_fops = {
- .owner = THIS_MODULE,
- .open = pvc_scroll_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = pvc_scroll_proc_write,
+static const struct proc_ops pvc_scroll_proc_ops = {
+ .proc_open = pvc_scroll_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = pvc_scroll_proc_write,
};
void pvc_proc_timerfunc(struct timer_list *unused)
@@ -189,12 +187,11 @@ static int __init pvc_proc_init(void)
}
for (i = 0; i < PVC_NLINES; i++) {
proc_entry = proc_create_data(pvc_linename[i], 0644, dir,
- &pvc_line_proc_fops, &pvc_linedata[i]);
+ &pvc_line_proc_ops, &pvc_linedata[i]);
if (proc_entry == NULL)
goto error;
}
- proc_entry = proc_create("scroll", 0644, dir,
- &pvc_scroll_proc_fops);
+ proc_entry = proc_create("scroll", 0644, dir, &pvc_scroll_proc_ops);
if (proc_entry == NULL)
goto error;
--- a/arch/powerpc/kernel/proc_powerpc.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/powerpc/kernel/proc_powerpc.c
@@ -39,10 +39,10 @@ static int page_map_mmap( struct file *f
return 0;
}
-static const struct file_operations page_map_fops = {
- .llseek = page_map_seek,
- .read = page_map_read,
- .mmap = page_map_mmap
+static const struct proc_ops page_map_proc_ops = {
+ .proc_lseek = page_map_seek,
+ .proc_read = page_map_read,
+ .proc_mmap = page_map_mmap,
};
@@ -51,7 +51,7 @@ static int __init proc_ppc64_init(void)
struct proc_dir_entry *pde;
pde = proc_create_data("powerpc/systemcfg", S_IFREG | 0444, NULL,
- &page_map_fops, vdso_data);
+ &page_map_proc_ops, vdso_data);
if (!pde)
return 1;
proc_set_size(pde, PAGE_SIZE);
--- a/arch/powerpc/kernel/rtasd.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/powerpc/kernel/rtasd.c
@@ -385,12 +385,12 @@ static __poll_t rtas_log_poll(struct fil
return 0;
}
-static const struct file_operations proc_rtas_log_operations = {
- .read = rtas_log_read,
- .poll = rtas_log_poll,
- .open = rtas_log_open,
- .release = rtas_log_release,
- .llseek = noop_llseek,
+static const struct proc_ops rtas_log_proc_ops = {
+ .proc_read = rtas_log_read,
+ .proc_poll = rtas_log_poll,
+ .proc_open = rtas_log_open,
+ .proc_release = rtas_log_release,
+ .proc_lseek = noop_llseek,
};
static int enable_surveillance(int timeout)
@@ -572,7 +572,7 @@ static int __init rtas_init(void)
return -ENODEV;
entry = proc_create("powerpc/rtas/error_log", 0400, NULL,
- &proc_rtas_log_operations);
+ &rtas_log_proc_ops);
if (!entry)
printk(KERN_ERR "Failed to create error_log proc entry\n");
--- a/arch/powerpc/kernel/rtas_flash.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/powerpc/kernel/rtas_flash.c
@@ -655,7 +655,7 @@ struct rtas_flash_file {
const char *filename;
const char *rtas_call_name;
int *status;
- const struct file_operations fops;
+ const struct proc_ops ops;
};
static const struct rtas_flash_file rtas_flash_files[] = {
@@ -663,36 +663,36 @@ static const struct rtas_flash_file rtas
.filename = "powerpc/rtas/" FIRMWARE_FLASH_NAME,
.rtas_call_name = "ibm,update-flash-64-and-reboot",
.status = &rtas_update_flash_data.status,
- .fops.read = rtas_flash_read_msg,
- .fops.write = rtas_flash_write,
- .fops.release = rtas_flash_release,
- .fops.llseek = default_llseek,
+ .ops.proc_read = rtas_flash_read_msg,
+ .ops.proc_write = rtas_flash_write,
+ .ops.proc_release = rtas_flash_release,
+ .ops.proc_lseek = default_llseek,
},
{
.filename = "powerpc/rtas/" FIRMWARE_UPDATE_NAME,
.rtas_call_name = "ibm,update-flash-64-and-reboot",
.status = &rtas_update_flash_data.status,
- .fops.read = rtas_flash_read_num,
- .fops.write = rtas_flash_write,
- .fops.release = rtas_flash_release,
- .fops.llseek = default_llseek,
+ .ops.proc_read = rtas_flash_read_num,
+ .ops.proc_write = rtas_flash_write,
+ .ops.proc_release = rtas_flash_release,
+ .ops.proc_lseek = default_llseek,
},
{
.filename = "powerpc/rtas/" VALIDATE_FLASH_NAME,
.rtas_call_name = "ibm,validate-flash-image",
.status = &rtas_validate_flash_data.status,
- .fops.read = validate_flash_read,
- .fops.write = validate_flash_write,
- .fops.release = validate_flash_release,
- .fops.llseek = default_llseek,
+ .ops.proc_read = validate_flash_read,
+ .ops.proc_write = validate_flash_write,
+ .ops.proc_release = validate_flash_release,
+ .ops.proc_lseek = default_llseek,
},
{
.filename = "powerpc/rtas/" MANAGE_FLASH_NAME,
.rtas_call_name = "ibm,manage-flash-image",
.status = &rtas_manage_flash_data.status,
- .fops.read = manage_flash_read,
- .fops.write = manage_flash_write,
- .fops.llseek = default_llseek,
+ .ops.proc_read = manage_flash_read,
+ .ops.proc_write = manage_flash_write,
+ .ops.proc_lseek = default_llseek,
}
};
@@ -723,7 +723,7 @@ static int __init rtas_flash_init(void)
const struct rtas_flash_file *f = &rtas_flash_files[i];
int token;
- if (!proc_create(f->filename, 0600, NULL, &f->fops))
+ if (!proc_create(f->filename, 0600, NULL, &f->ops))
goto enomem;
/*
--- a/arch/powerpc/kernel/rtas-proc.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/powerpc/kernel/rtas-proc.c
@@ -159,12 +159,12 @@ static int poweron_open(struct inode *in
return single_open(file, ppc_rtas_poweron_show, NULL);
}
-static const struct file_operations ppc_rtas_poweron_operations = {
- .open = poweron_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = ppc_rtas_poweron_write,
- .release = single_release,
+static const struct proc_ops ppc_rtas_poweron_proc_ops = {
+ .proc_open = poweron_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_write = ppc_rtas_poweron_write,
+ .proc_release = single_release,
};
static int progress_open(struct inode *inode, struct file *file)
@@ -172,12 +172,12 @@ static int progress_open(struct inode *i
return single_open(file, ppc_rtas_progress_show, NULL);
}
-static const struct file_operations ppc_rtas_progress_operations = {
- .open = progress_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = ppc_rtas_progress_write,
- .release = single_release,
+static const struct proc_ops ppc_rtas_progress_proc_ops = {
+ .proc_open = progress_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_write = ppc_rtas_progress_write,
+ .proc_release = single_release,
};
static int clock_open(struct inode *inode, struct file *file)
@@ -185,12 +185,12 @@ static int clock_open(struct inode *inod
return single_open(file, ppc_rtas_clock_show, NULL);
}
-static const struct file_operations ppc_rtas_clock_operations = {
- .open = clock_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = ppc_rtas_clock_write,
- .release = single_release,
+static const struct proc_ops ppc_rtas_clock_proc_ops = {
+ .proc_open = clock_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_write = ppc_rtas_clock_write,
+ .proc_release = single_release,
};
static int tone_freq_open(struct inode *inode, struct file *file)
@@ -198,12 +198,12 @@ static int tone_freq_open(struct inode *
return single_open(file, ppc_rtas_tone_freq_show, NULL);
}
-static const struct file_operations ppc_rtas_tone_freq_operations = {
- .open = tone_freq_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = ppc_rtas_tone_freq_write,
- .release = single_release,
+static const struct proc_ops ppc_rtas_tone_freq_proc_ops = {
+ .proc_open = tone_freq_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_write = ppc_rtas_tone_freq_write,
+ .proc_release = single_release,
};
static int tone_volume_open(struct inode *inode, struct file *file)
@@ -211,12 +211,12 @@ static int tone_volume_open(struct inode
return single_open(file, ppc_rtas_tone_volume_show, NULL);
}
-static const struct file_operations ppc_rtas_tone_volume_operations = {
- .open = tone_volume_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = ppc_rtas_tone_volume_write,
- .release = single_release,
+static const struct proc_ops ppc_rtas_tone_volume_proc_ops = {
+ .proc_open = tone_volume_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_write = ppc_rtas_tone_volume_write,
+ .proc_release = single_release,
};
static int ppc_rtas_find_all_sensors(void);
@@ -238,17 +238,17 @@ static int __init proc_rtas_init(void)
return -ENODEV;
proc_create("powerpc/rtas/progress", 0644, NULL,
- &ppc_rtas_progress_operations);
+ &ppc_rtas_progress_proc_ops);
proc_create("powerpc/rtas/clock", 0644, NULL,
- &ppc_rtas_clock_operations);
+ &ppc_rtas_clock_proc_ops);
proc_create("powerpc/rtas/poweron", 0644, NULL,
- &ppc_rtas_poweron_operations);
+ &ppc_rtas_poweron_proc_ops);
proc_create_single("powerpc/rtas/sensors", 0444, NULL,
ppc_rtas_sensors_show);
proc_create("powerpc/rtas/frequency", 0644, NULL,
- &ppc_rtas_tone_freq_operations);
+ &ppc_rtas_tone_freq_proc_ops);
proc_create("powerpc/rtas/volume", 0644, NULL,
- &ppc_rtas_tone_volume_operations);
+ &ppc_rtas_tone_volume_proc_ops);
proc_create_single("powerpc/rtas/rmo_buffer", 0400, NULL,
ppc_rtas_rmo_buf_show);
return 0;
--- a/arch/powerpc/mm/numa.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/powerpc/mm/numa.c
@@ -1616,11 +1616,11 @@ static ssize_t topology_write(struct fil
return count;
}
-static const struct file_operations topology_ops = {
- .read = seq_read,
- .write = topology_write,
- .open = topology_open,
- .release = single_release
+static const struct proc_ops topology_proc_ops = {
+ .proc_read = seq_read,
+ .proc_write = topology_write,
+ .proc_open = topology_open,
+ .proc_release = single_release,
};
static int topology_update_init(void)
@@ -1630,7 +1630,7 @@ static int topology_update_init(void)
if (vphn_enabled)
topology_schedule_update();
- if (!proc_create("powerpc/topology_updates", 0644, NULL, &topology_ops))
+ if (!proc_create("powerpc/topology_updates", 0644, NULL, &topology_proc_ops))
return -ENOMEM;
topology_inited = 1;
--- a/arch/powerpc/platforms/pseries/lpar.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/powerpc/platforms/pseries/lpar.c
@@ -582,12 +582,12 @@ static int vcpudispatch_stats_open(struc
return single_open(file, vcpudispatch_stats_display, NULL);
}
-static const struct file_operations vcpudispatch_stats_proc_ops = {
- .open = vcpudispatch_stats_open,
- .read = seq_read,
- .write = vcpudispatch_stats_write,
- .llseek = seq_lseek,
- .release = single_release,
+static const struct proc_ops vcpudispatch_stats_proc_ops = {
+ .proc_open = vcpudispatch_stats_open,
+ .proc_read = seq_read,
+ .proc_write = vcpudispatch_stats_write,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
};
static ssize_t vcpudispatch_stats_freq_write(struct file *file,
@@ -626,12 +626,12 @@ static int vcpudispatch_stats_freq_open(
return single_open(file, vcpudispatch_stats_freq_display, NULL);
}
-static const struct file_operations vcpudispatch_stats_freq_proc_ops = {
- .open = vcpudispatch_stats_freq_open,
- .read = seq_read,
- .write = vcpudispatch_stats_freq_write,
- .llseek = seq_lseek,
- .release = single_release,
+static const struct proc_ops vcpudispatch_stats_freq_proc_ops = {
+ .proc_open = vcpudispatch_stats_freq_open,
+ .proc_read = seq_read,
+ .proc_write = vcpudispatch_stats_freq_write,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
};
static int __init vcpudispatch_stats_procfs_init(void)
--- a/arch/powerpc/platforms/pseries/lparcfg.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/powerpc/platforms/pseries/lparcfg.c
@@ -698,12 +698,12 @@ static int lparcfg_open(struct inode *in
return single_open(file, lparcfg_data, NULL);
}
-static const struct file_operations lparcfg_fops = {
- .read = seq_read,
- .write = lparcfg_write,
- .open = lparcfg_open,
- .release = single_release,
- .llseek = seq_lseek,
+static const struct proc_ops lparcfg_proc_ops = {
+ .proc_read = seq_read,
+ .proc_write = lparcfg_write,
+ .proc_open = lparcfg_open,
+ .proc_release = single_release,
+ .proc_lseek = seq_lseek,
};
static int __init lparcfg_init(void)
@@ -714,7 +714,7 @@ static int __init lparcfg_init(void)
if (firmware_has_feature(FW_FEATURE_SPLPAR))
mode |= 0200;
- if (!proc_create("powerpc/lparcfg", mode, NULL, &lparcfg_fops)) {
+ if (!proc_create("powerpc/lparcfg", mode, NULL, &lparcfg_proc_ops)) {
printk(KERN_ERR "Failed to create powerpc/lparcfg\n");
return -EIO;
}
--- a/arch/powerpc/platforms/pseries/reconfig.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/powerpc/platforms/pseries/reconfig.c
@@ -391,9 +391,9 @@ out:
return rv ? rv : count;
}
-static const struct file_operations ofdt_fops = {
- .write = ofdt_write,
- .llseek = noop_llseek,
+static const struct proc_ops ofdt_proc_ops = {
+ .proc_write = ofdt_write,
+ .proc_lseek = noop_llseek,
};
/* create /proc/powerpc/ofdt write-only by root */
@@ -401,7 +401,7 @@ static int proc_ppc64_create_ofdt(void)
{
struct proc_dir_entry *ent;
- ent = proc_create("powerpc/ofdt", 0200, NULL, &ofdt_fops);
+ ent = proc_create("powerpc/ofdt", 0200, NULL, &ofdt_proc_ops);
if (ent)
proc_set_size(ent, 0);
--- a/arch/powerpc/platforms/pseries/scanlog.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/powerpc/platforms/pseries/scanlog.c
@@ -152,13 +152,12 @@ static int scanlog_release(struct inode
return 0;
}
-static const struct file_operations scanlog_fops = {
- .owner = THIS_MODULE,
- .read = scanlog_read,
- .write = scanlog_write,
- .open = scanlog_open,
- .release = scanlog_release,
- .llseek = noop_llseek,
+static const struct proc_ops scanlog_proc_ops = {
+ .proc_read = scanlog_read,
+ .proc_write = scanlog_write,
+ .proc_open = scanlog_open,
+ .proc_release = scanlog_release,
+ .proc_lseek = noop_llseek,
};
static int __init scanlog_init(void)
@@ -176,7 +175,7 @@ static int __init scanlog_init(void)
goto err;
ent = proc_create("powerpc/rtas/scan-log-dump", 0400, NULL,
- &scanlog_fops);
+ &scanlog_proc_ops);
if (!ent)
goto err;
return 0;
--- a/arch/sh/mm/alignment.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/sh/mm/alignment.c
@@ -152,13 +152,12 @@ static ssize_t alignment_proc_write(stru
return count;
}
-static const struct file_operations alignment_proc_fops = {
- .owner = THIS_MODULE,
- .open = alignment_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = alignment_proc_write,
+static const struct proc_ops alignment_proc_ops = {
+ .proc_open = alignment_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = alignment_proc_write,
};
/*
@@ -176,12 +175,12 @@ static int __init alignment_init(void)
return -ENOMEM;
res = proc_create_data("alignment", S_IWUSR | S_IRUGO, dir,
- &alignment_proc_fops, &se_usermode);
+ &alignment_proc_ops, &se_usermode);
if (!res)
return -ENOMEM;
res = proc_create_data("kernel_alignment", S_IWUSR | S_IRUGO, dir,
- &alignment_proc_fops, &se_kernmode_warn);
+ &alignment_proc_ops, &se_kernmode_warn);
if (!res)
return -ENOMEM;
--- a/arch/sparc/kernel/led.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/sparc/kernel/led.c
@@ -104,13 +104,12 @@ static ssize_t led_proc_write(struct fil
return count;
}
-static const struct file_operations led_proc_fops = {
- .owner = THIS_MODULE,
- .open = led_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = led_proc_write,
+static const struct proc_ops led_proc_ops = {
+ .proc_open = led_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = led_proc_write,
};
static struct proc_dir_entry *led;
@@ -121,7 +120,7 @@ static int __init led_init(void)
{
timer_setup(&led_blink_timer, led_blink, 0);
- led = proc_create("led", 0, NULL, &led_proc_fops);
+ led = proc_create("led", 0, NULL, &led_proc_ops);
if (!led)
return -ENOMEM;
--- a/arch/um/drivers/mconsole_kern.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/um/drivers/mconsole_kern.c
@@ -752,10 +752,9 @@ static ssize_t mconsole_proc_write(struc
return count;
}
-static const struct file_operations mconsole_proc_fops = {
- .owner = THIS_MODULE,
- .write = mconsole_proc_write,
- .llseek = noop_llseek,
+static const struct proc_ops mconsole_proc_ops = {
+ .proc_write = mconsole_proc_write,
+ .proc_lseek = noop_llseek,
};
static int create_proc_mconsole(void)
@@ -765,7 +764,7 @@ static int create_proc_mconsole(void)
if (notify_socket == NULL)
return 0;
- ent = proc_create("mconsole", 0200, NULL, &mconsole_proc_fops);
+ ent = proc_create("mconsole", 0200, NULL, &mconsole_proc_ops);
if (ent == NULL) {
printk(KERN_INFO "create_proc_mconsole : proc_create failed\n");
return 0;
--- a/arch/um/kernel/exitcode.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/um/kernel/exitcode.c
@@ -55,20 +55,19 @@ static ssize_t exitcode_proc_write(struc
return count;
}
-static const struct file_operations exitcode_proc_fops = {
- .owner = THIS_MODULE,
- .open = exitcode_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = exitcode_proc_write,
+static const struct proc_ops exitcode_proc_ops = {
+ .proc_open = exitcode_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = exitcode_proc_write,
};
static int make_proc_exitcode(void)
{
struct proc_dir_entry *ent;
- ent = proc_create("exitcode", 0600, NULL, &exitcode_proc_fops);
+ ent = proc_create("exitcode", 0600, NULL, &exitcode_proc_ops);
if (ent == NULL) {
printk(KERN_WARNING "make_proc_exitcode : Failed to register "
"/proc/exitcode\n");
--- a/arch/um/kernel/process.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/um/kernel/process.c
@@ -348,13 +348,12 @@ static ssize_t sysemu_proc_write(struct
return count;
}
-static const struct file_operations sysemu_proc_fops = {
- .owner = THIS_MODULE,
- .open = sysemu_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = sysemu_proc_write,
+static const struct proc_ops sysemu_proc_ops = {
+ .proc_open = sysemu_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = sysemu_proc_write,
};
int __init make_proc_sysemu(void)
@@ -363,7 +362,7 @@ int __init make_proc_sysemu(void)
if (!sysemu_supported)
return 0;
- ent = proc_create("sysemu", 0600, NULL, &sysemu_proc_fops);
+ ent = proc_create("sysemu", 0600, NULL, &sysemu_proc_ops);
if (ent == NULL)
{
--- a/arch/x86/kernel/cpu/mtrr/if.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/x86/kernel/cpu/mtrr/if.c
@@ -396,15 +396,16 @@ static int mtrr_open(struct inode *inode
return single_open(file, mtrr_seq_show, NULL);
}
-static const struct file_operations mtrr_fops = {
- .owner = THIS_MODULE,
- .open = mtrr_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = mtrr_write,
- .unlocked_ioctl = mtrr_ioctl,
- .compat_ioctl = mtrr_ioctl,
- .release = mtrr_close,
+static const struct proc_ops mtrr_proc_ops = {
+ .proc_open = mtrr_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_write = mtrr_write,
+ .proc_ioctl = mtrr_ioctl,
+#ifdef CONFIG_COMPAT
+ .proc_compat_ioctl = mtrr_ioctl,
+#endif
+ .proc_release = mtrr_close,
};
static int __init mtrr_if_init(void)
@@ -417,7 +418,7 @@ static int __init mtrr_if_init(void)
(!cpu_has(c, X86_FEATURE_CENTAUR_MCR)))
return -ENODEV;
- proc_create("mtrr", S_IWUSR | S_IRUGO, NULL, &mtrr_fops);
+ proc_create("mtrr", S_IWUSR | S_IRUGO, NULL, &mtrr_proc_ops);
return 0;
}
arch_initcall(mtrr_if_init);
--- a/arch/x86/platform/uv/tlb_uv.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/x86/platform/uv/tlb_uv.c
@@ -1668,12 +1668,12 @@ static int tunables_open(struct inode *i
return 0;
}
-static const struct file_operations proc_uv_ptc_operations = {
- .open = ptc_proc_open,
- .read = seq_read,
- .write = ptc_proc_write,
- .llseek = seq_lseek,
- .release = seq_release,
+static const struct proc_ops uv_ptc_proc_ops = {
+ .proc_open = ptc_proc_open,
+ .proc_read = seq_read,
+ .proc_write = ptc_proc_write,
+ .proc_lseek = seq_lseek,
+ .proc_release = seq_release,
};
static const struct file_operations tunables_fops = {
@@ -1691,7 +1691,7 @@ static int __init uv_ptc_init(void)
return 0;
proc_uv_ptc = proc_create(UV_PTC_BASENAME, 0444, NULL,
- &proc_uv_ptc_operations);
+ &uv_ptc_proc_ops);
if (!proc_uv_ptc) {
pr_err("unable to create %s proc entry\n",
UV_PTC_BASENAME);
--- a/arch/xtensa/platforms/iss/simdisk.c~proc-convert-everything-to-struct-proc_ops
+++ a/arch/xtensa/platforms/iss/simdisk.c
@@ -251,10 +251,10 @@ out_free:
return err;
}
-static const struct file_operations fops = {
- .read = proc_read_simdisk,
- .write = proc_write_simdisk,
- .llseek = default_llseek,
+static const struct proc_ops simdisk_proc_ops = {
+ .proc_read = proc_read_simdisk,
+ .proc_write = proc_write_simdisk,
+ .proc_lseek = default_llseek,
};
static int __init simdisk_setup(struct simdisk *dev, int which,
@@ -290,7 +290,7 @@ static int __init simdisk_setup(struct s
set_capacity(dev->gd, 0);
add_disk(dev->gd);
- dev->procfile = proc_create_data(tmp, 0644, procdir, &fops, dev);
+ dev->procfile = proc_create_data(tmp, 0644, procdir, &simdisk_proc_ops, dev);
return 0;
out_alloc_disk:
--- a/drivers/acpi/battery.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/acpi/battery.c
@@ -1202,13 +1202,12 @@ static int acpi_battery_alarm_proc_open(
return single_open(file, acpi_battery_alarm_proc_show, PDE_DATA(inode));
}
-static const struct file_operations acpi_battery_alarm_fops = {
- .owner = THIS_MODULE,
- .open = acpi_battery_alarm_proc_open,
- .read = seq_read,
- .write = acpi_battery_write_alarm,
- .llseek = seq_lseek,
- .release = single_release,
+static const struct proc_ops acpi_battery_alarm_proc_ops = {
+ .proc_open = acpi_battery_alarm_proc_open,
+ .proc_read = seq_read,
+ .proc_write = acpi_battery_write_alarm,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
};
static int acpi_battery_add_fs(struct acpi_device *device)
@@ -1228,7 +1227,7 @@ static int acpi_battery_add_fs(struct ac
acpi_battery_state_proc_show, acpi_driver_data(device)))
return -ENODEV;
if (!proc_create_data("alarm", S_IFREG | S_IRUGO | S_IWUSR,
- acpi_device_dir(device), &acpi_battery_alarm_fops,
+ acpi_device_dir(device), &acpi_battery_alarm_proc_ops,
acpi_driver_data(device)))
return -ENODEV;
return 0;
--- a/drivers/acpi/proc.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/acpi/proc.c
@@ -136,18 +136,17 @@ acpi_system_wakeup_device_open_fs(struct
PDE_DATA(inode));
}
-static const struct file_operations acpi_system_wakeup_device_fops = {
- .owner = THIS_MODULE,
- .open = acpi_system_wakeup_device_open_fs,
- .read = seq_read,
- .write = acpi_system_write_wakeup_device,
- .llseek = seq_lseek,
- .release = single_release,
+static const struct proc_ops acpi_system_wakeup_device_proc_ops = {
+ .proc_open = acpi_system_wakeup_device_open_fs,
+ .proc_read = seq_read,
+ .proc_write = acpi_system_write_wakeup_device,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
};
void __init acpi_sleep_proc_init(void)
{
/* 'wakeup device' [R/W] */
proc_create("wakeup", S_IFREG | S_IRUGO | S_IWUSR,
- acpi_root_dir, &acpi_system_wakeup_device_fops);
+ acpi_root_dir, &acpi_system_wakeup_device_proc_ops);
}
--- a/drivers/hwmon/dell-smm-hwmon.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/hwmon/dell-smm-hwmon.c
@@ -595,19 +595,18 @@ static int i8k_open_fs(struct inode *ino
return single_open(file, i8k_proc_show, NULL);
}
-static const struct file_operations i8k_fops = {
- .owner = THIS_MODULE,
- .open = i8k_open_fs,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .unlocked_ioctl = i8k_ioctl,
+static const struct proc_ops i8k_proc_ops = {
+ .proc_open = i8k_open_fs,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_ioctl = i8k_ioctl,
};
static void __init i8k_init_procfs(void)
{
/* Register the proc entry */
- proc_create("i8k", 0, NULL, &i8k_fops);
+ proc_create("i8k", 0, NULL, &i8k_proc_ops);
}
static void __exit i8k_exit_procfs(void)
--- a/drivers/ide/ide-proc.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/ide/ide-proc.c
@@ -381,13 +381,12 @@ parse_error:
return -EINVAL;
}
-static const struct file_operations ide_settings_proc_fops = {
- .owner = THIS_MODULE,
- .open = ide_settings_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = ide_settings_proc_write,
+static const struct proc_ops ide_settings_proc_ops = {
+ .proc_open = ide_settings_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = ide_settings_proc_write,
};
int ide_capacity_proc_show(struct seq_file *m, void *v)
@@ -546,7 +545,7 @@ void ide_proc_port_register_devices(ide_
if (drive->proc) {
ide_add_proc_entries(drive->proc, generic_drive_entries, drive);
proc_create_data("settings", S_IFREG|S_IRUSR|S_IWUSR,
- drive->proc, &ide_settings_proc_fops,
+ drive->proc, &ide_settings_proc_ops,
drive);
}
sprintf(name, "ide%d/%s", (drive->name[2]-'a')/2, drive->name);
@@ -615,7 +614,7 @@ static int ide_drivers_show(struct seq_f
return 0;
}
-DEFINE_SHOW_ATTRIBUTE(ide_drivers);
+DEFINE_PROC_SHOW_ATTRIBUTE(ide_drivers);
void proc_ide_create(void)
{
@@ -624,7 +623,7 @@ void proc_ide_create(void)
if (!proc_ide_root)
return;
- proc_create("drivers", 0, proc_ide_root, &ide_drivers_fops);
+ proc_create("drivers", 0, proc_ide_root, &ide_drivers_proc_ops);
}
void proc_ide_destroy(void)
--- a/drivers/input/input.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/input/input.c
@@ -1216,13 +1216,12 @@ static int input_proc_devices_open(struc
return seq_open(file, &input_devices_seq_ops);
}
-static const struct file_operations input_devices_fileops = {
- .owner = THIS_MODULE,
- .open = input_proc_devices_open,
- .poll = input_proc_devices_poll,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
+static const struct proc_ops input_devices_proc_ops = {
+ .proc_open = input_proc_devices_open,
+ .proc_poll = input_proc_devices_poll,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = seq_release,
};
static void *input_handlers_seq_start(struct seq_file *seq, loff_t *pos)
@@ -1280,12 +1279,11 @@ static int input_proc_handlers_open(stru
return seq_open(file, &input_handlers_seq_ops);
}
-static const struct file_operations input_handlers_fileops = {
- .owner = THIS_MODULE,
- .open = input_proc_handlers_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
+static const struct proc_ops input_handlers_proc_ops = {
+ .proc_open = input_proc_handlers_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = seq_release,
};
static int __init input_proc_init(void)
@@ -1297,12 +1295,12 @@ static int __init input_proc_init(void)
return -ENOMEM;
entry = proc_create("devices", 0, proc_bus_input_dir,
- &input_devices_fileops);
+ &input_devices_proc_ops);
if (!entry)
goto fail1;
entry = proc_create("handlers", 0, proc_bus_input_dir,
- &input_handlers_fileops);
+ &input_handlers_proc_ops);
if (!entry)
goto fail2;
--- a/drivers/isdn/capi/kcapi_proc.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/isdn/capi/kcapi_proc.c
@@ -199,8 +199,8 @@ static ssize_t empty_read(struct file *f
return 0;
}
-static const struct file_operations empty_fops = {
- .read = empty_read,
+static const struct proc_ops empty_proc_ops = {
+ .proc_read = empty_read,
};
// ---------------------------------------------------------------------------
@@ -214,7 +214,7 @@ kcapi_proc_init(void)
proc_create_seq("capi/contrstats", 0, NULL, &seq_contrstats_ops);
proc_create_seq("capi/applications", 0, NULL, &seq_applications_ops);
proc_create_seq("capi/applstats", 0, NULL, &seq_applstats_ops);
- proc_create("capi/driver", 0, NULL, &empty_fops);
+ proc_create("capi/driver", 0, NULL, &empty_proc_ops);
}
void
--- a/drivers/macintosh/via-pmu.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/macintosh/via-pmu.c
@@ -212,7 +212,7 @@ static int pmu_info_proc_show(struct seq
static int pmu_irqstats_proc_show(struct seq_file *m, void *v);
static int pmu_battery_proc_show(struct seq_file *m, void *v);
static void pmu_pass_intr(unsigned char *data, int len);
-static const struct file_operations pmu_options_proc_fops;
+static const struct proc_ops pmu_options_proc_ops;
#ifdef CONFIG_ADB
const struct adb_driver via_pmu_driver = {
@@ -573,7 +573,7 @@ static int __init via_pmu_dev_init(void)
proc_pmu_irqstats = proc_create_single("interrupts", 0,
proc_pmu_root, pmu_irqstats_proc_show);
proc_pmu_options = proc_create("options", 0600, proc_pmu_root,
- &pmu_options_proc_fops);
+ &pmu_options_proc_ops);
}
return 0;
}
@@ -974,13 +974,12 @@ static ssize_t pmu_options_proc_write(st
return fcount;
}
-static const struct file_operations pmu_options_proc_fops = {
- .owner = THIS_MODULE,
- .open = pmu_options_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = pmu_options_proc_write,
+static const struct proc_ops pmu_options_proc_ops = {
+ .proc_open = pmu_options_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = pmu_options_proc_write,
};
#ifdef CONFIG_ADB
--- a/drivers/md/md.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/md/md.c
@@ -8279,13 +8279,12 @@ static __poll_t mdstat_poll(struct file
return mask;
}
-static const struct file_operations md_seq_fops = {
- .owner = THIS_MODULE,
- .open = md_seq_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
- .poll = mdstat_poll,
+static const struct proc_ops mdstat_proc_ops = {
+ .proc_open = md_seq_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = seq_release,
+ .proc_poll = mdstat_poll,
};
int register_md_personality(struct md_personality *p)
@@ -9454,7 +9453,7 @@ static void md_geninit(void)
{
pr_debug("md: sizeof(mdp_super_t) = %d\n", (int)sizeof(mdp_super_t));
- proc_create("mdstat", S_IRUGO, NULL, &md_seq_fops);
+ proc_create("mdstat", S_IRUGO, NULL, &mdstat_proc_ops);
}
static int __init md_init(void)
--- a/drivers/misc/sgi-gru/gruprocfs.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/misc/sgi-gru/gruprocfs.c
@@ -255,28 +255,28 @@ static int options_open(struct inode *in
}
/* *INDENT-OFF* */
-static const struct file_operations statistics_fops = {
- .open = statistics_open,
- .read = seq_read,
- .write = statistics_write,
- .llseek = seq_lseek,
- .release = single_release,
+static const struct proc_ops statistics_proc_ops = {
+ .proc_open = statistics_open,
+ .proc_read = seq_read,
+ .proc_write = statistics_write,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
};
-static const struct file_operations mcs_statistics_fops = {
- .open = mcs_statistics_open,
- .read = seq_read,
- .write = mcs_statistics_write,
- .llseek = seq_lseek,
- .release = single_release,
+static const struct proc_ops mcs_statistics_proc_ops = {
+ .proc_open = mcs_statistics_open,
+ .proc_read = seq_read,
+ .proc_write = mcs_statistics_write,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
};
-static const struct file_operations options_fops = {
- .open = options_open,
- .read = seq_read,
- .write = options_write,
- .llseek = seq_lseek,
- .release = single_release,
+static const struct proc_ops options_proc_ops = {
+ .proc_open = options_open,
+ .proc_read = seq_read,
+ .proc_write = options_write,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
};
static struct proc_dir_entry *proc_gru __read_mostly;
@@ -286,11 +286,11 @@ int gru_proc_init(void)
proc_gru = proc_mkdir("sgi_uv/gru", NULL);
if (!proc_gru)
return -1;
- if (!proc_create("statistics", 0644, proc_gru, &statistics_fops))
+ if (!proc_create("statistics", 0644, proc_gru, &statistics_proc_ops))
goto err;
- if (!proc_create("mcs_statistics", 0644, proc_gru, &mcs_statistics_fops))
+ if (!proc_create("mcs_statistics", 0644, proc_gru, &mcs_statistics_proc_ops))
goto err;
- if (!proc_create("debug_options", 0644, proc_gru, &options_fops))
+ if (!proc_create("debug_options", 0644, proc_gru, &options_proc_ops))
goto err;
if (!proc_create_seq("cch_status", 0444, proc_gru, &cch_seq_ops))
goto err;
--- a/drivers/net/wireless/cisco/airo.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/net/wireless/cisco/airo.c
@@ -4420,73 +4420,65 @@ static int proc_BSSList_open( struct ino
static int proc_config_open( struct inode *inode, struct file *file );
static int proc_wepkey_open( struct inode *inode, struct file *file );
-static const struct file_operations proc_statsdelta_ops = {
- .owner = THIS_MODULE,
- .read = proc_read,
- .open = proc_statsdelta_open,
- .release = proc_close,
- .llseek = default_llseek,
-};
-
-static const struct file_operations proc_stats_ops = {
- .owner = THIS_MODULE,
- .read = proc_read,
- .open = proc_stats_open,
- .release = proc_close,
- .llseek = default_llseek,
-};
-
-static const struct file_operations proc_status_ops = {
- .owner = THIS_MODULE,
- .read = proc_read,
- .open = proc_status_open,
- .release = proc_close,
- .llseek = default_llseek,
-};
-
-static const struct file_operations proc_SSID_ops = {
- .owner = THIS_MODULE,
- .read = proc_read,
- .write = proc_write,
- .open = proc_SSID_open,
- .release = proc_close,
- .llseek = default_llseek,
-};
-
-static const struct file_operations proc_BSSList_ops = {
- .owner = THIS_MODULE,
- .read = proc_read,
- .write = proc_write,
- .open = proc_BSSList_open,
- .release = proc_close,
- .llseek = default_llseek,
-};
-
-static const struct file_operations proc_APList_ops = {
- .owner = THIS_MODULE,
- .read = proc_read,
- .write = proc_write,
- .open = proc_APList_open,
- .release = proc_close,
- .llseek = default_llseek,
-};
-
-static const struct file_operations proc_config_ops = {
- .owner = THIS_MODULE,
- .read = proc_read,
- .write = proc_write,
- .open = proc_config_open,
- .release = proc_close,
- .llseek = default_llseek,
-};
-
-static const struct file_operations proc_wepkey_ops = {
- .owner = THIS_MODULE,
- .read = proc_read,
- .write = proc_write,
- .open = proc_wepkey_open,
- .release = proc_close,
- .llseek = default_llseek,
+static const struct proc_ops proc_statsdelta_ops = {
+ .proc_read = proc_read,
+ .proc_open = proc_statsdelta_open,
+ .proc_release = proc_close,
+ .proc_lseek = default_llseek,
+};
+
+static const struct proc_ops proc_stats_ops = {
+ .proc_read = proc_read,
+ .proc_open = proc_stats_open,
+ .proc_release = proc_close,
+ .proc_lseek = default_llseek,
+};
+
+static const struct proc_ops proc_status_ops = {
+ .proc_read = proc_read,
+ .proc_open = proc_status_open,
+ .proc_release = proc_close,
+ .proc_lseek = default_llseek,
+};
+
+static const struct proc_ops proc_SSID_ops = {
+ .proc_read = proc_read,
+ .proc_write = proc_write,
+ .proc_open = proc_SSID_open,
+ .proc_release = proc_close,
+ .proc_lseek = default_llseek,
+};
+
+static const struct proc_ops proc_BSSList_ops = {
+ .proc_read = proc_read,
+ .proc_write = proc_write,
+ .proc_open = proc_BSSList_open,
+ .proc_release = proc_close,
+ .proc_lseek = default_llseek,
+};
+
+static const struct proc_ops proc_APList_ops = {
+ .proc_read = proc_read,
+ .proc_write = proc_write,
+ .proc_open = proc_APList_open,
+ .proc_release = proc_close,
+ .proc_lseek = default_llseek,
+};
+
+static const struct proc_ops proc_config_ops = {
+ .proc_read = proc_read,
+ .proc_write = proc_write,
+ .proc_open = proc_config_open,
+ .proc_release = proc_close,
+ .proc_lseek = default_llseek,
+};
+
+static const struct proc_ops proc_wepkey_ops = {
+ .proc_read = proc_read,
+ .proc_write = proc_write,
+ .proc_open = proc_wepkey_open,
+ .proc_release = proc_close,
+ .proc_lseek = default_llseek,
};
static struct proc_dir_entry *airo_entry;
--- a/drivers/net/wireless/intel/ipw2x00/libipw_module.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/net/wireless/intel/ipw2x00/libipw_module.c
@@ -240,13 +240,12 @@ static ssize_t debug_level_proc_write(st
return strnlen(buf, len);
}
-static const struct file_operations debug_level_proc_fops = {
- .owner = THIS_MODULE,
- .open = debug_level_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = debug_level_proc_write,
+static const struct proc_ops debug_level_proc_ops = {
+ .proc_open = debug_level_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = debug_level_proc_write,
};
#endif /* CONFIG_LIBIPW_DEBUG */
@@ -263,7 +262,7 @@ static int __init libipw_init(void)
return -EIO;
}
e = proc_create("debug_level", 0644, libipw_proc,
- &debug_level_proc_fops);
+ &debug_level_proc_ops);
if (!e) {
remove_proc_entry(DRV_PROCNAME, init_net.proc_net);
libipw_proc = NULL;
--- a/drivers/net/wireless/intersil/hostap/hostap_hw.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/net/wireless/intersil/hostap/hostap_hw.c
@@ -126,7 +126,7 @@ static void prism2_check_sta_fw_version(
#ifdef PRISM2_DOWNLOAD_SUPPORT
/* hostap_download.c */
-static const struct file_operations prism2_download_aux_dump_proc_fops;
+static const struct proc_ops prism2_download_aux_dump_proc_ops;
static u8 * prism2_read_pda(struct net_device *dev);
static int prism2_download(local_info_t *local,
struct prism2_download_param *param);
@@ -3094,7 +3094,7 @@ prism2_init_local_data(struct prism2_hel
local->func->reset_port = prism2_reset_port;
local->func->schedule_reset = prism2_schedule_reset;
#ifdef PRISM2_DOWNLOAD_SUPPORT
- local->func->read_aux_fops = &prism2_download_aux_dump_proc_fops;
+ local->func->read_aux_proc_ops = &prism2_download_aux_dump_proc_ops;
local->func->download = prism2_download;
#endif /* PRISM2_DOWNLOAD_SUPPORT */
local->func->tx = prism2_tx_80211;
--- a/drivers/net/wireless/intersil/hostap/hostap_proc.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/net/wireless/intersil/hostap/hostap_proc.c
@@ -211,9 +211,9 @@ static ssize_t prism2_pda_proc_read(stru
return count;
}
-static const struct file_operations prism2_pda_proc_fops = {
- .read = prism2_pda_proc_read,
- .llseek = generic_file_llseek,
+static const struct proc_ops prism2_pda_proc_ops = {
+ .proc_read = prism2_pda_proc_read,
+ .proc_lseek = generic_file_llseek,
};
@@ -223,8 +223,8 @@ static ssize_t prism2_aux_dump_proc_no_r
return 0;
}
-static const struct file_operations prism2_aux_dump_proc_fops = {
- .read = prism2_aux_dump_proc_no_read,
+static const struct proc_ops prism2_aux_dump_proc_ops = {
+ .proc_read = prism2_aux_dump_proc_no_read,
};
@@ -379,9 +379,9 @@ void hostap_init_proc(local_info_t *loca
proc_create_seq_data("wds", 0, local->proc,
&prism2_wds_proc_seqops, local);
proc_create_data("pda", 0, local->proc,
- &prism2_pda_proc_fops, local);
+ &prism2_pda_proc_ops, local);
proc_create_data("aux_dump", 0, local->proc,
- local->func->read_aux_fops ?: &prism2_aux_dump_proc_fops,
+ local->func->read_aux_proc_ops ?: &prism2_aux_dump_proc_ops,
local);
proc_create_seq_data("bss_list", 0, local->proc,
&prism2_bss_list_proc_seqops, local);
--- a/drivers/net/wireless/intersil/hostap/hostap_wlan.h~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/net/wireless/intersil/hostap/hostap_wlan.h
@@ -599,7 +599,7 @@ struct prism2_helper_functions {
struct prism2_download_param *param);
int (*tx)(struct sk_buff *skb, struct net_device *dev);
int (*set_tim)(struct net_device *dev, int aid, int set);
- const struct file_operations *read_aux_fops;
+ const struct proc_ops *read_aux_proc_ops;
int need_tx_headroom; /* number of bytes of headroom needed before
* IEEE 802.11 header */
--- a/drivers/net/wireless/ray_cs.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/net/wireless/ray_cs.c
@@ -2717,10 +2717,9 @@ static ssize_t ray_cs_essid_proc_write(s
return count;
}
-static const struct file_operations ray_cs_essid_proc_fops = {
- .owner = THIS_MODULE,
- .write = ray_cs_essid_proc_write,
- .llseek = noop_llseek,
+static const struct proc_ops ray_cs_essid_proc_ops = {
+ .proc_write = ray_cs_essid_proc_write,
+ .proc_lseek = noop_llseek,
};
static ssize_t int_proc_write(struct file *file, const char __user *buffer,
@@ -2751,10 +2750,9 @@ static ssize_t int_proc_write(struct fil
return count;
}
-static const struct file_operations int_proc_fops = {
- .owner = THIS_MODULE,
- .write = int_proc_write,
- .llseek = noop_llseek,
+static const struct proc_ops int_proc_ops = {
+ .proc_write = int_proc_write,
+ .proc_lseek = noop_llseek,
};
#endif
@@ -2790,10 +2788,10 @@ static int __init init_ray_cs(void)
proc_mkdir("driver/ray_cs", NULL);
proc_create_single("driver/ray_cs/ray_cs", 0, NULL, ray_cs_proc_show);
- proc_create("driver/ray_cs/essid", 0200, NULL, &ray_cs_essid_proc_fops);
- proc_create_data("driver/ray_cs/net_type", 0200, NULL, &int_proc_fops,
+ proc_create("driver/ray_cs/essid", 0200, NULL, &ray_cs_essid_proc_ops);
+ proc_create_data("driver/ray_cs/net_type", 0200, NULL, &int_proc_ops,
&net_type);
- proc_create_data("driver/ray_cs/translate", 0200, NULL, &int_proc_fops,
+ proc_create_data("driver/ray_cs/translate", 0200, NULL, &int_proc_ops,
&translate);
#endif
if (translate != 0)
--- a/drivers/parisc/led.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/parisc/led.c
@@ -230,13 +230,12 @@ parse_error:
return -EINVAL;
}
-static const struct file_operations led_proc_fops = {
- .owner = THIS_MODULE,
- .open = led_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = led_proc_write,
+static const struct proc_ops led_proc_ops = {
+ .proc_open = led_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = led_proc_write,
};
static int __init led_create_procfs(void)
@@ -252,14 +251,14 @@ static int __init led_create_procfs(void
if (!lcd_no_led_support)
{
ent = proc_create_data("led", S_IRUGO|S_IWUSR, proc_pdc_root,
- &led_proc_fops, (void *)LED_NOLCD); /* LED */
+ &led_proc_ops, (void *)LED_NOLCD); /* LED */
if (!ent) return -1;
}
if (led_type == LED_HASLCD)
{
ent = proc_create_data("lcd", S_IRUGO|S_IWUSR, proc_pdc_root,
- &led_proc_fops, (void *)LED_HASLCD); /* LCD */
+ &led_proc_ops, (void *)LED_HASLCD); /* LCD */
if (!ent) return -1;
}
--- a/drivers/pci/proc.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/pci/proc.c
@@ -306,19 +306,20 @@ static int proc_bus_pci_release(struct i
}
#endif /* HAVE_PCI_MMAP */
-static const struct file_operations proc_bus_pci_operations = {
- .owner = THIS_MODULE,
- .llseek = proc_bus_pci_lseek,
- .read = proc_bus_pci_read,
- .write = proc_bus_pci_write,
- .unlocked_ioctl = proc_bus_pci_ioctl,
- .compat_ioctl = proc_bus_pci_ioctl,
+static const struct proc_ops proc_bus_pci_ops = {
+ .proc_lseek = proc_bus_pci_lseek,
+ .proc_read = proc_bus_pci_read,
+ .proc_write = proc_bus_pci_write,
+ .proc_ioctl = proc_bus_pci_ioctl,
+#ifdef CONFIG_COMPAT
+ .proc_compat_ioctl = proc_bus_pci_ioctl,
+#endif
#ifdef HAVE_PCI_MMAP
- .open = proc_bus_pci_open,
- .release = proc_bus_pci_release,
- .mmap = proc_bus_pci_mmap,
+ .proc_open = proc_bus_pci_open,
+ .proc_release = proc_bus_pci_release,
+ .proc_mmap = proc_bus_pci_mmap,
#ifdef HAVE_ARCH_PCI_GET_UNMAPPED_AREA
- .get_unmapped_area = get_pci_unmapped_area,
+ .proc_get_unmapped_area = get_pci_unmapped_area,
#endif /* HAVE_ARCH_PCI_GET_UNMAPPED_AREA */
#endif /* HAVE_PCI_MMAP */
};
@@ -424,7 +425,7 @@ int pci_proc_attach_device(struct pci_de
sprintf(name, "%02x.%x", PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
e = proc_create_data(name, S_IFREG | S_IRUGO | S_IWUSR, bus->procdir,
- &proc_bus_pci_operations, dev);
+ &proc_bus_pci_ops, dev);
if (!e)
return -ENOMEM;
proc_set_size(e, dev->cfg_size);
--- a/drivers/platform/x86/thinkpad_acpi.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/platform/x86/thinkpad_acpi.c
@@ -907,13 +907,12 @@ static ssize_t dispatch_proc_write(struc
return ret;
}
-static const struct file_operations dispatch_proc_fops = {
- .owner = THIS_MODULE,
- .open = dispatch_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = dispatch_proc_write,
+static const struct proc_ops dispatch_proc_ops = {
+ .proc_open = dispatch_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = dispatch_proc_write,
};
static char *next_cmd(char **cmds)
@@ -9984,7 +9983,7 @@ static int __init ibm_init(struct ibm_in
if (ibm->write)
mode |= S_IWUSR;
entry = proc_create_data(ibm->name, mode, proc_dir,
- &dispatch_proc_fops, ibm);
+ &dispatch_proc_ops, ibm);
if (!entry) {
pr_err("unable to create proc entry %s\n", ibm->name);
ret = -ENODEV;
--- a/drivers/platform/x86/toshiba_acpi.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/platform/x86/toshiba_acpi.c
@@ -1432,13 +1432,12 @@ static ssize_t lcd_proc_write(struct fil
return count;
}
-static const struct file_operations lcd_proc_fops = {
- .owner = THIS_MODULE,
- .open = lcd_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = lcd_proc_write,
+static const struct proc_ops lcd_proc_ops = {
+ .proc_open = lcd_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = lcd_proc_write,
};
/* Video-Out */
@@ -1539,13 +1538,12 @@ static ssize_t video_proc_write(struct f
return ret ? -EIO : count;
}
-static const struct file_operations video_proc_fops = {
- .owner = THIS_MODULE,
- .open = video_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = video_proc_write,
+static const struct proc_ops video_proc_ops = {
+ .proc_open = video_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = video_proc_write,
};
/* Fan status */
@@ -1617,13 +1615,12 @@ static ssize_t fan_proc_write(struct fil
return count;
}
-static const struct file_operations fan_proc_fops = {
- .owner = THIS_MODULE,
- .open = fan_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = fan_proc_write,
+static const struct proc_ops fan_proc_ops = {
+ .proc_open = fan_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = fan_proc_write,
};
static int keys_proc_show(struct seq_file *m, void *v)
@@ -1662,13 +1659,12 @@ static ssize_t keys_proc_write(struct fi
return count;
}
-static const struct file_operations keys_proc_fops = {
- .owner = THIS_MODULE,
- .open = keys_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = keys_proc_write,
+static const struct proc_ops keys_proc_ops = {
+ .proc_open = keys_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = keys_proc_write,
};
static int __maybe_unused version_proc_show(struct seq_file *m, void *v)
@@ -1688,16 +1684,16 @@ static void create_toshiba_proc_entries(
{
if (dev->backlight_dev)
proc_create_data("lcd", S_IRUGO | S_IWUSR, toshiba_proc_dir,
- &lcd_proc_fops, dev);
+ &lcd_proc_ops, dev);
if (dev->video_supported)
proc_create_data("video", S_IRUGO | S_IWUSR, toshiba_proc_dir,
- &video_proc_fops, dev);
+ &video_proc_ops, dev);
if (dev->fan_supported)
proc_create_data("fan", S_IRUGO | S_IWUSR, toshiba_proc_dir,
- &fan_proc_fops, dev);
+ &fan_proc_ops, dev);
if (dev->hotkey_dev)
proc_create_data("keys", S_IRUGO | S_IWUSR, toshiba_proc_dir,
- &keys_proc_fops, dev);
+ &keys_proc_ops, dev);
proc_create_single_data("version", S_IRUGO, toshiba_proc_dir,
version_proc_show, dev);
}
--- a/drivers/pnp/isapnp/proc.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/pnp/isapnp/proc.c
@@ -49,10 +49,9 @@ static ssize_t isapnp_proc_bus_read(stru
return nbytes;
}
-static const struct file_operations isapnp_proc_bus_file_operations = {
- .owner = THIS_MODULE,
- .llseek = isapnp_proc_bus_lseek,
- .read = isapnp_proc_bus_read,
+static const struct proc_ops isapnp_proc_bus_proc_ops = {
+ .proc_lseek = isapnp_proc_bus_lseek,
+ .proc_read = isapnp_proc_bus_read,
};
static int isapnp_proc_attach_device(struct pnp_dev *dev)
@@ -69,7 +68,7 @@ static int isapnp_proc_attach_device(str
}
sprintf(name, "%02x", dev->number);
e = dev->procent = proc_create_data(name, S_IFREG | S_IRUGO, de,
- &isapnp_proc_bus_file_operations, dev);
+ &isapnp_proc_bus_proc_ops, dev);
if (!e)
return -ENOMEM;
proc_set_size(e, 256);
--- a/drivers/pnp/pnpbios/proc.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/pnp/pnpbios/proc.c
@@ -210,13 +210,12 @@ out:
return ret;
}
-static const struct file_operations pnpbios_proc_fops = {
- .owner = THIS_MODULE,
- .open = pnpbios_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = pnpbios_proc_write,
+static const struct proc_ops pnpbios_proc_ops = {
+ .proc_open = pnpbios_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = pnpbios_proc_write,
};
int pnpbios_interface_attach_device(struct pnp_bios_node *node)
@@ -228,13 +227,13 @@ int pnpbios_interface_attach_device(stru
if (!proc_pnp)
return -EIO;
if (!pnpbios_dont_use_current_config) {
- proc_create_data(name, 0644, proc_pnp, &pnpbios_proc_fops,
+ proc_create_data(name, 0644, proc_pnp, &pnpbios_proc_ops,
(void *)(long)(node->handle));
}
if (!proc_pnp_boot)
return -EIO;
- if (proc_create_data(name, 0644, proc_pnp_boot, &pnpbios_proc_fops,
+ if (proc_create_data(name, 0644, proc_pnp_boot, &pnpbios_proc_ops,
(void *)(long)(node->handle + 0x100)))
return 0;
return -EIO;
--- a/drivers/s390/block/dasd_proc.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/s390/block/dasd_proc.c
@@ -320,13 +320,12 @@ out_error:
#endif /* CONFIG_DASD_PROFILE */
}
-static const struct file_operations dasd_stats_proc_fops = {
- .owner = THIS_MODULE,
- .open = dasd_stats_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = dasd_stats_proc_write,
+static const struct proc_ops dasd_stats_proc_ops = {
+ .proc_open = dasd_stats_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = dasd_stats_proc_write,
};
/*
@@ -347,7 +346,7 @@ dasd_proc_init(void)
dasd_statistics_entry = proc_create("statistics",
S_IFREG | S_IRUGO | S_IWUSR,
dasd_proc_root_entry,
- &dasd_stats_proc_fops);
+ &dasd_stats_proc_ops);
if (!dasd_statistics_entry)
goto out_nostatistics;
return 0;
--- a/drivers/s390/cio/blacklist.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/s390/cio/blacklist.c
@@ -398,12 +398,12 @@ cio_ignore_proc_open(struct inode *inode
sizeof(struct ccwdev_iter));
}
-static const struct file_operations cio_ignore_proc_fops = {
- .open = cio_ignore_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release_private,
- .write = cio_ignore_write,
+static const struct proc_ops cio_ignore_proc_ops = {
+ .proc_open = cio_ignore_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = seq_release_private,
+ .proc_write = cio_ignore_write,
};
static int
@@ -412,7 +412,7 @@ cio_ignore_proc_init (void)
struct proc_dir_entry *entry;
entry = proc_create("cio_ignore", S_IFREG | S_IRUGO | S_IWUSR, NULL,
- &cio_ignore_proc_fops);
+ &cio_ignore_proc_ops);
if (!entry)
return -ENOENT;
return 0;
--- a/drivers/s390/cio/css.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/s390/cio/css.c
@@ -1372,18 +1372,17 @@ static ssize_t cio_settle_write(struct f
return ret ? ret : count;
}
-static const struct file_operations cio_settle_proc_fops = {
- .open = nonseekable_open,
- .write = cio_settle_write,
- .llseek = no_llseek,
+static const struct proc_ops cio_settle_proc_ops = {
+ .proc_open = nonseekable_open,
+ .proc_write = cio_settle_write,
+ .proc_lseek = no_llseek,
};
static int __init cio_settle_init(void)
{
struct proc_dir_entry *entry;
- entry = proc_create("cio_settle", S_IWUSR, NULL,
- &cio_settle_proc_fops);
+ entry = proc_create("cio_settle", S_IWUSR, NULL, &cio_settle_proc_ops);
if (!entry)
return -ENOMEM;
return 0;
--- a/drivers/scsi/esas2r/esas2r_main.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/scsi/esas2r/esas2r_main.c
@@ -617,6 +617,13 @@ static const struct file_operations esas
.unlocked_ioctl = esas2r_proc_ioctl,
};
+static const struct proc_ops esas2r_proc_ops = {
+ .proc_ioctl = esas2r_proc_ioctl,
+#ifdef CONFIG_COMPAT
+ .proc_compat_ioctl = compat_ptr_ioctl,
+#endif
+};
+
static struct Scsi_Host *esas2r_proc_host;
static int esas2r_proc_major;
@@ -728,7 +735,7 @@ const char *esas2r_info(struct Scsi_Host
pde = proc_create(ATTONODE_NAME, 0,
sh->hostt->proc_dir,
- &esas2r_proc_fops);
+ &esas2r_proc_ops);
if (!pde) {
esas2r_log_dev(ESAS2R_LOG_WARN,
--- a/drivers/scsi/scsi_devinfo.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/scsi/scsi_devinfo.c
@@ -736,13 +736,12 @@ out:
return err;
}
-static const struct file_operations scsi_devinfo_proc_fops = {
- .owner = THIS_MODULE,
- .open = proc_scsi_devinfo_open,
- .read = seq_read,
- .write = proc_scsi_devinfo_write,
- .llseek = seq_lseek,
- .release = seq_release,
+static const struct proc_ops scsi_devinfo_proc_ops = {
+ .proc_open = proc_scsi_devinfo_open,
+ .proc_read = seq_read,
+ .proc_write = proc_scsi_devinfo_write,
+ .proc_lseek = seq_lseek,
+ .proc_release = seq_release,
};
#endif /* CONFIG_SCSI_PROC_FS */
@@ -867,7 +866,7 @@ int __init scsi_init_devinfo(void)
}
#ifdef CONFIG_SCSI_PROC_FS
- p = proc_create("scsi/device_info", 0, NULL, &scsi_devinfo_proc_fops);
+ p = proc_create("scsi/device_info", 0, NULL, &scsi_devinfo_proc_ops);
if (!p) {
error = -ENOMEM;
goto out;
--- a/drivers/scsi/scsi_proc.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/scsi/scsi_proc.c
@@ -83,12 +83,12 @@ static int proc_scsi_host_open(struct in
4 * PAGE_SIZE);
}
-static const struct file_operations proc_scsi_fops = {
- .open = proc_scsi_host_open,
- .release = single_release,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = proc_scsi_host_write
+static const struct proc_ops proc_scsi_ops = {
+ .proc_open = proc_scsi_host_open,
+ .proc_release = single_release,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_write = proc_scsi_host_write
};
/**
@@ -146,7 +146,7 @@ void scsi_proc_host_add(struct Scsi_Host
sprintf(name,"%d", shost->host_no);
p = proc_create_data(name, S_IRUGO | S_IWUSR,
- sht->proc_dir, &proc_scsi_fops, shost);
+ sht->proc_dir, &proc_scsi_ops, shost);
if (!p)
printk(KERN_ERR "%s: Failed to register host %d in"
"%s\n", __func__, shost->host_no,
@@ -436,13 +436,12 @@ static int proc_scsi_open(struct inode *
return seq_open(file, &scsi_seq_ops);
}
-static const struct file_operations proc_scsi_operations = {
- .owner = THIS_MODULE,
- .open = proc_scsi_open,
- .read = seq_read,
- .write = proc_scsi_write,
- .llseek = seq_lseek,
- .release = seq_release,
+static const struct proc_ops scsi_scsi_proc_ops = {
+ .proc_open = proc_scsi_open,
+ .proc_read = seq_read,
+ .proc_write = proc_scsi_write,
+ .proc_lseek = seq_lseek,
+ .proc_release = seq_release,
};
/**
@@ -456,7 +455,7 @@ int __init scsi_init_procfs(void)
if (!proc_scsi)
goto err1;
- pde = proc_create("scsi/scsi", 0, NULL, &proc_scsi_operations);
+ pde = proc_create("scsi/scsi", 0, NULL, &scsi_scsi_proc_ops);
if (!pde)
goto err2;
--- a/drivers/scsi/sg.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/scsi/sg.c
@@ -2322,25 +2322,23 @@ static int sg_proc_seq_show_int(struct s
static int sg_proc_single_open_adio(struct inode *inode, struct file *file);
static ssize_t sg_proc_write_adio(struct file *filp, const char __user *buffer,
size_t count, loff_t *off);
-static const struct file_operations adio_fops = {
- .owner = THIS_MODULE,
- .open = sg_proc_single_open_adio,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = sg_proc_write_adio,
- .release = single_release,
+static const struct proc_ops adio_proc_ops = {
+ .proc_open = sg_proc_single_open_adio,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_write = sg_proc_write_adio,
+ .proc_release = single_release,
};
static int sg_proc_single_open_dressz(struct inode *inode, struct file *file);
static ssize_t sg_proc_write_dressz(struct file *filp,
const char __user *buffer, size_t count, loff_t *off);
-static const struct file_operations dressz_fops = {
- .owner = THIS_MODULE,
- .open = sg_proc_single_open_dressz,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = sg_proc_write_dressz,
- .release = single_release,
+static const struct proc_ops dressz_proc_ops = {
+ .proc_open = sg_proc_single_open_dressz,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_write = sg_proc_write_dressz,
+ .proc_release = single_release,
};
static int sg_proc_seq_show_version(struct seq_file *s, void *v);
@@ -2381,9 +2379,9 @@ sg_proc_init(void)
if (!p)
return 1;
- proc_create("allow_dio", S_IRUGO | S_IWUSR, p, &adio_fops);
+ proc_create("allow_dio", S_IRUGO | S_IWUSR, p, &adio_proc_ops);
proc_create_seq("debug", S_IRUGO, p, &debug_seq_ops);
- proc_create("def_reserved_size", S_IRUGO | S_IWUSR, p, &dressz_fops);
+ proc_create("def_reserved_size", S_IRUGO | S_IWUSR, p, &dressz_proc_ops);
proc_create_single("device_hdr", S_IRUGO, p, sg_proc_seq_show_devhdr);
proc_create_seq("devices", S_IRUGO, p, &dev_seq_ops);
proc_create_seq("device_strs", S_IRUGO, p, &devstrs_seq_ops);
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c
@@ -264,12 +264,12 @@ static int open_debug_level(struct inode
return single_open(file, show_debug_level, NULL);
}
-static const struct file_operations fops = {
- .open = open_debug_level,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = write_debug_level,
- .release = single_release,
+static const struct proc_ops debug_level_proc_ops = {
+ .proc_open = open_debug_level,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_write = write_debug_level,
+ .proc_release = single_release,
};
int __init ieee80211_debug_init(void)
@@ -284,7 +284,7 @@ int __init ieee80211_debug_init(void)
" proc directory\n");
return -EIO;
}
- e = proc_create("debug_level", 0644, ieee80211_proc, &fops);
+ e = proc_create("debug_level", 0644, ieee80211_proc, &debug_level_proc_ops);
if (!e) {
remove_proc_entry(DRV_NAME, init_net.proc_net);
ieee80211_proc = NULL;
--- a/drivers/tty/sysrq.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/tty/sysrq.c
@@ -1101,15 +1101,15 @@ static ssize_t write_sysrq_trigger(struc
return count;
}
-static const struct file_operations proc_sysrq_trigger_operations = {
- .write = write_sysrq_trigger,
- .llseek = noop_llseek,
+static const struct proc_ops sysrq_trigger_proc_ops = {
+ .proc_write = write_sysrq_trigger,
+ .proc_lseek = noop_llseek,
};
static void sysrq_init_procfs(void)
{
if (!proc_create("sysrq-trigger", S_IWUSR, NULL,
- &proc_sysrq_trigger_operations))
+ &sysrq_trigger_proc_ops))
pr_err("Failed to register proc interface\n");
}
--- a/drivers/usb/gadget/function/rndis.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/usb/gadget/function/rndis.c
@@ -72,7 +72,7 @@ static rndis_resp_t *rndis_add_response(
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
-static const struct file_operations rndis_proc_fops;
+static const struct proc_ops rndis_proc_ops;
#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
@@ -902,7 +902,7 @@ struct rndis_params *rndis_register(void
sprintf(name, NAME_TEMPLATE, i);
proc_entry = proc_create_data(name, 0660, NULL,
- &rndis_proc_fops, params);
+ &rndis_proc_ops, params);
if (!proc_entry) {
kfree(params);
rndis_put_nr(i);
@@ -1164,13 +1164,12 @@ static int rndis_proc_open(struct inode
return single_open(file, rndis_proc_show, PDE_DATA(inode));
}
-static const struct file_operations rndis_proc_fops = {
- .owner = THIS_MODULE,
- .open = rndis_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = rndis_proc_write,
+static const struct proc_ops rndis_proc_ops = {
+ .proc_open = rndis_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = rndis_proc_write,
};
#define NAME_TEMPLATE "driver/rndis-%03d"
--- a/drivers/video/fbdev/via/viafbdev.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/video/fbdev/via/viafbdev.c
@@ -1173,13 +1173,12 @@ static ssize_t viafb_dvp0_proc_write(str
return count;
}
-static const struct file_operations viafb_dvp0_proc_fops = {
- .owner = THIS_MODULE,
- .open = viafb_dvp0_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = viafb_dvp0_proc_write,
+static const struct proc_ops viafb_dvp0_proc_ops = {
+ .proc_open = viafb_dvp0_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = viafb_dvp0_proc_write,
};
static int viafb_dvp1_proc_show(struct seq_file *m, void *v)
@@ -1238,13 +1237,12 @@ static ssize_t viafb_dvp1_proc_write(str
return count;
}
-static const struct file_operations viafb_dvp1_proc_fops = {
- .owner = THIS_MODULE,
- .open = viafb_dvp1_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = viafb_dvp1_proc_write,
+static const struct proc_ops viafb_dvp1_proc_ops = {
+ .proc_open = viafb_dvp1_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = viafb_dvp1_proc_write,
};
static int viafb_dfph_proc_show(struct seq_file *m, void *v)
@@ -1273,13 +1271,12 @@ static ssize_t viafb_dfph_proc_write(str
return count;
}
-static const struct file_operations viafb_dfph_proc_fops = {
- .owner = THIS_MODULE,
- .open = viafb_dfph_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = viafb_dfph_proc_write,
+static const struct proc_ops viafb_dfph_proc_ops = {
+ .proc_open = viafb_dfph_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = viafb_dfph_proc_write,
};
static int viafb_dfpl_proc_show(struct seq_file *m, void *v)
@@ -1308,13 +1305,12 @@ static ssize_t viafb_dfpl_proc_write(str
return count;
}
-static const struct file_operations viafb_dfpl_proc_fops = {
- .owner = THIS_MODULE,
- .open = viafb_dfpl_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = viafb_dfpl_proc_write,
+static const struct proc_ops viafb_dfpl_proc_ops = {
+ .proc_open = viafb_dfpl_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = viafb_dfpl_proc_write,
};
static int viafb_vt1636_proc_show(struct seq_file *m, void *v)
@@ -1444,13 +1440,12 @@ static ssize_t viafb_vt1636_proc_write(s
return count;
}
-static const struct file_operations viafb_vt1636_proc_fops = {
- .owner = THIS_MODULE,
- .open = viafb_vt1636_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = viafb_vt1636_proc_write,
+static const struct proc_ops viafb_vt1636_proc_ops = {
+ .proc_open = viafb_vt1636_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = viafb_vt1636_proc_write,
};
#endif /* CONFIG_FB_VIA_DIRECT_PROCFS */
@@ -1522,13 +1517,12 @@ static ssize_t viafb_iga1_odev_proc_writ
return res;
}
-static const struct file_operations viafb_iga1_odev_proc_fops = {
- .owner = THIS_MODULE,
- .open = viafb_iga1_odev_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = viafb_iga1_odev_proc_write,
+static const struct proc_ops viafb_iga1_odev_proc_ops = {
+ .proc_open = viafb_iga1_odev_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = viafb_iga1_odev_proc_write,
};
static int viafb_iga2_odev_proc_show(struct seq_file *m, void *v)
@@ -1562,13 +1556,12 @@ static ssize_t viafb_iga2_odev_proc_writ
return res;
}
-static const struct file_operations viafb_iga2_odev_proc_fops = {
- .owner = THIS_MODULE,
- .open = viafb_iga2_odev_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = viafb_iga2_odev_proc_write,
+static const struct proc_ops viafb_iga2_odev_proc_ops = {
+ .proc_open = viafb_iga2_odev_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = viafb_iga2_odev_proc_write,
};
#define IS_VT1636(lvds_chip) ((lvds_chip).lvds_chip_name == VT1636_LVDS)
@@ -1580,14 +1573,14 @@ static void viafb_init_proc(struct viafb
shared->proc_entry = viafb_entry;
if (viafb_entry) {
#ifdef CONFIG_FB_VIA_DIRECT_PROCFS
- proc_create("dvp0", 0, viafb_entry, &viafb_dvp0_proc_fops);
- proc_create("dvp1", 0, viafb_entry, &viafb_dvp1_proc_fops);
- proc_create("dfph", 0, viafb_entry, &viafb_dfph_proc_fops);
- proc_create("dfpl", 0, viafb_entry, &viafb_dfpl_proc_fops);
+ proc_create("dvp0", 0, viafb_entry, &viafb_dvp0_proc_ops);
+ proc_create("dvp1", 0, viafb_entry, &viafb_dvp1_proc_ops);
+ proc_create("dfph", 0, viafb_entry, &viafb_dfph_proc_ops);
+ proc_create("dfpl", 0, viafb_entry, &viafb_dfpl_proc_ops);
if (IS_VT1636(shared->chip_info.lvds_chip_info)
|| IS_VT1636(shared->chip_info.lvds_chip_info2))
proc_create("vt1636", 0, viafb_entry,
- &viafb_vt1636_proc_fops);
+ &viafb_vt1636_proc_ops);
#endif /* CONFIG_FB_VIA_DIRECT_PROCFS */
proc_create_single("supported_output_devices", 0, viafb_entry,
@@ -1595,11 +1588,11 @@ static void viafb_init_proc(struct viafb
iga1_entry = proc_mkdir("iga1", viafb_entry);
shared->iga1_proc_entry = iga1_entry;
proc_create("output_devices", 0, iga1_entry,
- &viafb_iga1_odev_proc_fops);
+ &viafb_iga1_odev_proc_ops);
iga2_entry = proc_mkdir("iga2", viafb_entry);
shared->iga2_proc_entry = iga2_entry;
proc_create("output_devices", 0, iga2_entry,
- &viafb_iga2_odev_proc_fops);
+ &viafb_iga2_odev_proc_ops);
}
}
static void viafb_remove_proc(struct viafb_shared *shared)
--- a/drivers/zorro/proc.c~proc-convert-everything-to-struct-proc_ops
+++ a/drivers/zorro/proc.c
@@ -56,10 +56,9 @@ proc_bus_zorro_read(struct file *file, c
return nbytes;
}
-static const struct file_operations proc_bus_zorro_operations = {
- .owner = THIS_MODULE,
- .llseek = proc_bus_zorro_lseek,
- .read = proc_bus_zorro_read,
+static const struct proc_ops bus_zorro_proc_ops = {
+ .proc_lseek = proc_bus_zorro_lseek,
+ .proc_read = proc_bus_zorro_read,
};
static void * zorro_seq_start(struct seq_file *m, loff_t *pos)
@@ -105,7 +104,7 @@ static int __init zorro_proc_attach_devi
sprintf(name, "%02x", slot);
entry = proc_create_data(name, 0, proc_bus_zorro_dir,
- &proc_bus_zorro_operations,
+ &bus_zorro_proc_ops,
&zorro_autocon[slot]);
if (!entry)
return -ENOMEM;
--- a/fs/cifs/cifs_debug.c~proc-convert-everything-to-struct-proc_ops
+++ a/fs/cifs/cifs_debug.c
@@ -611,12 +611,12 @@ static int cifs_stats_proc_open(struct i
return single_open(file, cifs_stats_proc_show, NULL);
}
-static const struct file_operations cifs_stats_proc_fops = {
- .open = cifs_stats_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = cifs_stats_proc_write,
+static const struct proc_ops cifs_stats_proc_ops = {
+ .proc_open = cifs_stats_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = cifs_stats_proc_write,
};
#ifdef CONFIG_CIFS_SMB_DIRECT
@@ -640,12 +640,12 @@ static int name##_open(struct inode *ino
return single_open(file, name##_proc_show, NULL); \
} \
\
-static const struct file_operations cifs_##name##_proc_fops = { \
- .open = name##_open, \
- .read = seq_read, \
- .llseek = seq_lseek, \
- .release = single_release, \
- .write = name##_write, \
+static const struct proc_ops cifs_##name##_proc_fops = { \
+ .proc_open = name##_open, \
+ .proc_read = seq_read, \
+ .proc_lseek = seq_lseek, \
+ .proc_release = single_release, \
+ .proc_write = name##_write, \
}
PROC_FILE_DEFINE(rdma_readwrite_threshold);
@@ -659,11 +659,11 @@ PROC_FILE_DEFINE(smbd_receive_credit_max
#endif
static struct proc_dir_entry *proc_fs_cifs;
-static const struct file_operations cifsFYI_proc_fops;
-static const struct file_operations cifs_lookup_cache_proc_fops;
-static const struct file_operations traceSMB_proc_fops;
-static const struct file_operations cifs_security_flags_proc_fops;
-static const struct file_operations cifs_linux_ext_proc_fops;
+static const struct proc_ops cifsFYI_proc_ops;
+static const struct proc_ops cifs_lookup_cache_proc_ops;
+static const struct proc_ops traceSMB_proc_ops;
+static const struct proc_ops cifs_security_flags_proc_ops;
+static const struct proc_ops cifs_linux_ext_proc_ops;
void
cifs_proc_init(void)
@@ -678,18 +678,18 @@ cifs_proc_init(void)
proc_create_single("open_files", 0400, proc_fs_cifs,
cifs_debug_files_proc_show);
- proc_create("Stats", 0644, proc_fs_cifs, &cifs_stats_proc_fops);
- proc_create("cifsFYI", 0644, proc_fs_cifs, &cifsFYI_proc_fops);
- proc_create("traceSMB", 0644, proc_fs_cifs, &traceSMB_proc_fops);
+ proc_create("Stats", 0644, proc_fs_cifs, &cifs_stats_proc_ops);
+ proc_create("cifsFYI", 0644, proc_fs_cifs, &cifsFYI_proc_ops);
+ proc_create("traceSMB", 0644, proc_fs_cifs, &traceSMB_proc_ops);
proc_create("LinuxExtensionsEnabled", 0644, proc_fs_cifs,
- &cifs_linux_ext_proc_fops);
+ &cifs_linux_ext_proc_ops);
proc_create("SecurityFlags", 0644, proc_fs_cifs,
- &cifs_security_flags_proc_fops);
+ &cifs_security_flags_proc_ops);
proc_create("LookupCacheEnabled", 0644, proc_fs_cifs,
- &cifs_lookup_cache_proc_fops);
+ &cifs_lookup_cache_proc_ops);
#ifdef CONFIG_CIFS_DFS_UPCALL
- proc_create("dfscache", 0644, proc_fs_cifs, &dfscache_proc_fops);
+ proc_create("dfscache", 0644, proc_fs_cifs, &dfscache_proc_ops);
#endif
#ifdef CONFIG_CIFS_SMB_DIRECT
@@ -774,12 +774,12 @@ static ssize_t cifsFYI_proc_write(struct
return count;
}
-static const struct file_operations cifsFYI_proc_fops = {
- .open = cifsFYI_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = cifsFYI_proc_write,
+static const struct proc_ops cifsFYI_proc_ops = {
+ .proc_open = cifsFYI_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = cifsFYI_proc_write,
};
static int cifs_linux_ext_proc_show(struct seq_file *m, void *v)
@@ -805,12 +805,12 @@ static ssize_t cifs_linux_ext_proc_write
return count;
}
-static const struct file_operations cifs_linux_ext_proc_fops = {
- .open = cifs_linux_ext_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = cifs_linux_ext_proc_write,
+static const struct proc_ops cifs_linux_ext_proc_ops = {
+ .proc_open = cifs_linux_ext_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = cifs_linux_ext_proc_write,
};
static int cifs_lookup_cache_proc_show(struct seq_file *m, void *v)
@@ -836,12 +836,12 @@ static ssize_t cifs_lookup_cache_proc_wr
return count;
}
-static const struct file_operations cifs_lookup_cache_proc_fops = {
- .open = cifs_lookup_cache_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = cifs_lookup_cache_proc_write,
+static const struct proc_ops cifs_lookup_cache_proc_ops = {
+ .proc_open = cifs_lookup_cache_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = cifs_lookup_cache_proc_write,
};
static int traceSMB_proc_show(struct seq_file *m, void *v)
@@ -867,12 +867,12 @@ static ssize_t traceSMB_proc_write(struc
return count;
}
-static const struct file_operations traceSMB_proc_fops = {
- .open = traceSMB_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = traceSMB_proc_write,
+static const struct proc_ops traceSMB_proc_ops = {
+ .proc_open = traceSMB_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = traceSMB_proc_write,
};
static int cifs_security_flags_proc_show(struct seq_file *m, void *v)
@@ -978,12 +978,12 @@ static ssize_t cifs_security_flags_proc_
return count;
}
-static const struct file_operations cifs_security_flags_proc_fops = {
- .open = cifs_security_flags_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = cifs_security_flags_proc_write,
+static const struct proc_ops cifs_security_flags_proc_ops = {
+ .proc_open = cifs_security_flags_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = cifs_security_flags_proc_write,
};
#else
inline void cifs_proc_init(void)
--- a/fs/cifs/dfs_cache.c~proc-convert-everything-to-struct-proc_ops
+++ a/fs/cifs/dfs_cache.c
@@ -8,6 +8,7 @@
#include <linux/jhash.h>
#include <linux/ktime.h>
#include <linux/slab.h>
+#include <linux/proc_fs.h>
#include <linux/nls.h>
#include <linux/workqueue.h>
#include "cifsglob.h"
@@ -211,12 +212,12 @@ static int dfscache_proc_open(struct ino
return single_open(file, dfscache_proc_show, NULL);
}
-const struct file_operations dfscache_proc_fops = {
- .open = dfscache_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = dfscache_proc_write,
+const struct proc_ops dfscache_proc_ops = {
+ .proc_open = dfscache_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = dfscache_proc_write,
};
#ifdef CONFIG_CIFS_DEBUG2
--- a/fs/cifs/dfs_cache.h~proc-convert-everything-to-struct-proc_ops
+++ a/fs/cifs/dfs_cache.h
@@ -24,7 +24,7 @@ struct dfs_cache_tgt_iterator {
extern int dfs_cache_init(void);
extern void dfs_cache_destroy(void);
-extern const struct file_operations dfscache_proc_fops;
+extern const struct proc_ops dfscache_proc_ops;
extern int dfs_cache_find(const unsigned int xid, struct cifs_ses *ses,
const struct nls_table *nls_codepage, int remap,
--- a/fs/fscache/internal.h~proc-convert-everything-to-struct-proc_ops
+++ a/fs/fscache/internal.h
@@ -111,7 +111,7 @@ extern void fscache_enqueue_object(struc
* object-list.c
*/
#ifdef CONFIG_FSCACHE_OBJECT_LIST
-extern const struct file_operations fscache_objlist_fops;
+extern const struct proc_ops fscache_objlist_proc_ops;
extern void fscache_objlist_add(struct fscache_object *);
extern void fscache_objlist_remove(struct fscache_object *);
--- a/fs/fscache/object-list.c~proc-convert-everything-to-struct-proc_ops
+++ a/fs/fscache/object-list.c
@@ -7,6 +7,7 @@
#define FSCACHE_DEBUG_LEVEL COOKIE
#include <linux/module.h>
+#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/key.h>
@@ -405,9 +406,9 @@ static int fscache_objlist_release(struc
return seq_release(inode, file);
}
-const struct file_operations fscache_objlist_fops = {
- .open = fscache_objlist_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = fscache_objlist_release,
+const struct proc_ops fscache_objlist_proc_ops = {
+ .proc_open = fscache_objlist_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = fscache_objlist_release,
};
--- a/fs/fscache/proc.c~proc-convert-everything-to-struct-proc_ops
+++ a/fs/fscache/proc.c
@@ -35,7 +35,7 @@ int __init fscache_proc_init(void)
#ifdef CONFIG_FSCACHE_OBJECT_LIST
if (!proc_create("fs/fscache/objects", S_IFREG | 0444, NULL,
- &fscache_objlist_fops))
+ &fscache_objlist_proc_ops))
goto error_objects;
#endif
--- a/fs/jbd2/journal.c~proc-convert-everything-to-struct-proc_ops
+++ a/fs/jbd2/journal.c
@@ -1074,12 +1074,11 @@ static int jbd2_seq_info_release(struct
return seq_release(inode, file);
}
-static const struct file_operations jbd2_seq_info_fops = {
- .owner = THIS_MODULE,
- .open = jbd2_seq_info_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = jbd2_seq_info_release,
+static const struct proc_ops jbd2_info_proc_ops = {
+ .proc_open = jbd2_seq_info_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = jbd2_seq_info_release,
};
static struct proc_dir_entry *proc_jbd2_stats;
@@ -1089,7 +1088,7 @@ static void jbd2_stats_proc_init(journal
journal->j_proc_entry = proc_mkdir(journal->j_devname, proc_jbd2_stats);
if (journal->j_proc_entry) {
proc_create_data("info", S_IRUGO, journal->j_proc_entry,
- &jbd2_seq_info_fops, journal);
+ &jbd2_info_proc_ops, journal);
}
}
--- a/fs/jfs/jfs_debug.c~proc-convert-everything-to-struct-proc_ops
+++ a/fs/jfs/jfs_debug.c
@@ -43,12 +43,12 @@ static ssize_t jfs_loglevel_proc_write(s
return count;
}
-static const struct file_operations jfs_loglevel_proc_fops = {
- .open = jfs_loglevel_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = jfs_loglevel_proc_write,
+static const struct proc_ops jfs_loglevel_proc_ops = {
+ .proc_open = jfs_loglevel_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = jfs_loglevel_proc_write,
};
#endif
@@ -68,7 +68,7 @@ void jfs_proc_init(void)
#endif
#ifdef CONFIG_JFS_DEBUG
proc_create_single("TxAnchor", 0, base, jfs_txanchor_proc_show);
- proc_create("loglevel", 0, base, &jfs_loglevel_proc_fops);
+ proc_create("loglevel", 0, base, &jfs_loglevel_proc_ops);
#endif
}
--- a/fs/lockd/procfs.c~proc-convert-everything-to-struct-proc_ops
+++ a/fs/lockd/procfs.c
@@ -60,11 +60,11 @@ nlm_end_grace_read(struct file *file, ch
return simple_read_from_buffer(buf, size, pos, resp, sizeof(resp));
}
-static const struct file_operations lockd_end_grace_operations = {
- .write = nlm_end_grace_write,
- .read = nlm_end_grace_read,
- .llseek = default_llseek,
- .release = simple_transaction_release,
+static const struct proc_ops lockd_end_grace_proc_ops = {
+ .proc_write = nlm_end_grace_write,
+ .proc_read = nlm_end_grace_read,
+ .proc_lseek = default_llseek,
+ .proc_release = simple_transaction_release,
};
int __init
@@ -76,7 +76,7 @@ lockd_create_procfs(void)
if (!entry)
return -ENOMEM;
entry = proc_create("nlm_end_grace", S_IRUGO|S_IWUSR, entry,
- &lockd_end_grace_operations);
+ &lockd_end_grace_proc_ops);
if (!entry) {
remove_proc_entry("fs/lockd", NULL);
return -ENOMEM;
--- a/fs/nfsd/nfsctl.c~proc-convert-everything-to-struct-proc_ops
+++ a/fs/nfsd/nfsctl.c
@@ -157,11 +157,11 @@ static int exports_proc_open(struct inod
return exports_net_open(current->nsproxy->net_ns, file);
}
-static const struct file_operations exports_proc_operations = {
- .open = exports_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
+static const struct proc_ops exports_proc_ops = {
+ .proc_open = exports_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = seq_release,
};
static int exports_nfsd_open(struct inode *inode, struct file *file)
@@ -1431,8 +1431,7 @@ static int create_proc_exports_entry(voi
entry = proc_mkdir("fs/nfs", NULL);
if (!entry)
return -ENOMEM;
- entry = proc_create("exports", 0, entry,
- &exports_proc_operations);
+ entry = proc_create("exports", 0, entry, &exports_proc_ops);
if (!entry) {
remove_proc_entry("fs/nfs", NULL);
return -ENOMEM;
--- a/fs/nfsd/stats.c~proc-convert-everything-to-struct-proc_ops
+++ a/fs/nfsd/stats.c
@@ -84,17 +84,17 @@ static int nfsd_proc_open(struct inode *
return single_open(file, nfsd_proc_show, NULL);
}
-static const struct file_operations nfsd_proc_fops = {
- .open = nfsd_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
+static const struct proc_ops nfsd_proc_ops = {
+ .proc_open = nfsd_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
};
void
nfsd_stat_init(void)
{
- svc_proc_register(&init_net, &nfsd_svcstats, &nfsd_proc_fops);
+ svc_proc_register(&init_net, &nfsd_svcstats, &nfsd_proc_ops);
}
void
--- a/fs/proc/cpuinfo.c~proc-convert-everything-to-struct-proc_ops
+++ a/fs/proc/cpuinfo.c
@@ -16,16 +16,16 @@ static int cpuinfo_open(struct inode *in
return seq_open(file, &cpuinfo_op);
}
-static const struct file_operations proc_cpuinfo_operations = {
- .open = cpuinfo_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
+static const struct proc_ops cpuinfo_proc_ops = {
+ .proc_open = cpuinfo_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = seq_release,
};
static int __init proc_cpuinfo_init(void)
{
- proc_create("cpuinfo", 0, NULL, &proc_cpuinfo_operations);
+ proc_create("cpuinfo", 0, NULL, &cpuinfo_proc_ops);
return 0;
}
fs_initcall(proc_cpuinfo_init);
--- a/fs/proc/kcore.c~proc-convert-everything-to-struct-proc_ops
+++ a/fs/proc/kcore.c
@@ -574,11 +574,11 @@ static int release_kcore(struct inode *i
return 0;
}
-static const struct file_operations proc_kcore_operations = {
- .read = read_kcore,
- .open = open_kcore,
- .release = release_kcore,
- .llseek = default_llseek,
+static const struct proc_ops kcore_proc_ops = {
+ .proc_read = read_kcore,
+ .proc_open = open_kcore,
+ .proc_release = release_kcore,
+ .proc_lseek = default_llseek,
};
/* just remember that we have to update kcore */
@@ -637,8 +637,7 @@ static void __init add_modules_range(voi
static int __init proc_kcore_init(void)
{
- proc_root_kcore = proc_create("kcore", S_IRUSR, NULL,
- &proc_kcore_operations);
+ proc_root_kcore = proc_create("kcore", S_IRUSR, NULL, &kcore_proc_ops);
if (!proc_root_kcore) {
pr_err("couldn't create /proc/kcore\n");
return 0; /* Always returns 0. */
--- a/fs/proc/kmsg.c~proc-convert-everything-to-struct-proc_ops
+++ a/fs/proc/kmsg.c
@@ -49,17 +49,17 @@ static __poll_t kmsg_poll(struct file *f
}
-static const struct file_operations proc_kmsg_operations = {
- .read = kmsg_read,
- .poll = kmsg_poll,
- .open = kmsg_open,
- .release = kmsg_release,
- .llseek = generic_file_llseek,
+static const struct proc_ops kmsg_proc_ops = {
+ .proc_read = kmsg_read,
+ .proc_poll = kmsg_poll,
+ .proc_open = kmsg_open,
+ .proc_release = kmsg_release,
+ .proc_lseek = generic_file_llseek,
};
static int __init proc_kmsg_init(void)
{
- proc_create("kmsg", S_IRUSR, NULL, &proc_kmsg_operations);
+ proc_create("kmsg", S_IRUSR, NULL, &kmsg_proc_ops);
return 0;
}
fs_initcall(proc_kmsg_init);
--- a/fs/proc/page.c~proc-convert-everything-to-struct-proc_ops
+++ a/fs/proc/page.c
@@ -89,9 +89,9 @@ static ssize_t kpagecount_read(struct fi
return ret;
}
-static const struct file_operations proc_kpagecount_operations = {
- .llseek = mem_lseek,
- .read = kpagecount_read,
+static const struct proc_ops kpagecount_proc_ops = {
+ .proc_lseek = mem_lseek,
+ .proc_read = kpagecount_read,
};
/* /proc/kpageflags - an array exposing page flags
@@ -263,9 +263,9 @@ static ssize_t kpageflags_read(struct fi
return ret;
}
-static const struct file_operations proc_kpageflags_operations = {
- .llseek = mem_lseek,
- .read = kpageflags_read,
+static const struct proc_ops kpageflags_proc_ops = {
+ .proc_lseek = mem_lseek,
+ .proc_read = kpageflags_read,
};
#ifdef CONFIG_MEMCG
@@ -317,18 +317,18 @@ static ssize_t kpagecgroup_read(struct f
return ret;
}
-static const struct file_operations proc_kpagecgroup_operations = {
- .llseek = mem_lseek,
- .read = kpagecgroup_read,
+static const struct proc_ops kpagecgroup_proc_ops = {
+ .proc_lseek = mem_lseek,
+ .proc_read = kpagecgroup_read,
};
#endif /* CONFIG_MEMCG */
static int __init proc_page_init(void)
{
- proc_create("kpagecount", S_IRUSR, NULL, &proc_kpagecount_operations);
- proc_create("kpageflags", S_IRUSR, NULL, &proc_kpageflags_operations);
+ proc_create("kpagecount", S_IRUSR, NULL, &kpagecount_proc_ops);
+ proc_create("kpageflags", S_IRUSR, NULL, &kpageflags_proc_ops);
#ifdef CONFIG_MEMCG
- proc_create("kpagecgroup", S_IRUSR, NULL, &proc_kpagecgroup_operations);
+ proc_create("kpagecgroup", S_IRUSR, NULL, &kpagecgroup_proc_ops);
#endif
return 0;
}
--- a/fs/proc/stat.c~proc-convert-everything-to-struct-proc_ops
+++ a/fs/proc/stat.c
@@ -223,16 +223,16 @@ static int stat_open(struct inode *inode
return single_open_size(file, show_stat, NULL, size);
}
-static const struct file_operations proc_stat_operations = {
- .open = stat_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
+static const struct proc_ops stat_proc_ops = {
+ .proc_open = stat_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
};
static int __init proc_stat_init(void)
{
- proc_create("stat", 0, NULL, &proc_stat_operations);
+ proc_create("stat", 0, NULL, &stat_proc_ops);
return 0;
}
fs_initcall(proc_stat_init);
--- a/fs/proc/vmcore.c~proc-convert-everything-to-struct-proc_ops
+++ a/fs/proc/vmcore.c
@@ -667,10 +667,10 @@ static int mmap_vmcore(struct file *file
}
#endif
-static const struct file_operations proc_vmcore_operations = {
- .read = read_vmcore,
- .llseek = default_llseek,
- .mmap = mmap_vmcore,
+static const struct proc_ops vmcore_proc_ops = {
+ .proc_read = read_vmcore,
+ .proc_lseek = default_llseek,
+ .proc_mmap = mmap_vmcore,
};
static struct vmcore* __init get_new_element(void)
@@ -1555,7 +1555,7 @@ static int __init vmcore_init(void)
elfcorehdr_free(elfcorehdr_addr);
elfcorehdr_addr = ELFCORE_ADDR_ERR;
- proc_vmcore = proc_create("vmcore", S_IRUSR, NULL, &proc_vmcore_operations);
+ proc_vmcore = proc_create("vmcore", S_IRUSR, NULL, &vmcore_proc_ops);
if (proc_vmcore)
proc_vmcore->size = vmcore_size;
return 0;
--- a/include/linux/seq_file.h~proc-convert-everything-to-struct-proc_ops
+++ a/include/linux/seq_file.h
@@ -160,6 +160,19 @@ static const struct file_operations __na
.release = single_release, \
}
+#define DEFINE_PROC_SHOW_ATTRIBUTE(__name) \
+static int __name ## _open(struct inode *inode, struct file *file) \
+{ \
+ return single_open(file, __name ## _show, inode->i_private); \
+} \
+ \
+static const struct proc_ops __name ## _proc_ops = { \
+ .proc_open = __name ## _open, \
+ .proc_read = seq_read, \
+ .proc_lseek = seq_lseek, \
+ .proc_release = single_release, \
+}
+
static inline struct user_namespace *seq_user_ns(struct seq_file *seq)
{
#ifdef CONFIG_USER_NS
--- a/include/linux/sunrpc/stats.h~proc-convert-everything-to-struct-proc_ops
+++ a/include/linux/sunrpc/stats.h
@@ -63,7 +63,7 @@ struct proc_dir_entry * rpc_proc_registe
void rpc_proc_unregister(struct net *,const char *);
void rpc_proc_zero(const struct rpc_program *);
struct proc_dir_entry * svc_proc_register(struct net *, struct svc_stat *,
- const struct file_operations *);
+ const struct proc_ops *);
void svc_proc_unregister(struct net *, const char *);
void svc_seq_show(struct seq_file *,
@@ -75,7 +75,7 @@ static inline void rpc_proc_unregister(s
static inline void rpc_proc_zero(const struct rpc_program *p) {}
static inline struct proc_dir_entry *svc_proc_register(struct net *net, struct svc_stat *s,
- const struct file_operations *f) { return NULL; }
+ const struct proc_ops *proc_ops) { return NULL; }
static inline void svc_proc_unregister(struct net *net, const char *p) {}
static inline void svc_seq_show(struct seq_file *seq,
--- a/ipc/util.c~proc-convert-everything-to-struct-proc_ops
+++ a/ipc/util.c
@@ -126,7 +126,7 @@ void ipc_init_ids(struct ipc_ids *ids)
}
#ifdef CONFIG_PROC_FS
-static const struct file_operations sysvipc_proc_fops;
+static const struct proc_ops sysvipc_proc_ops;
/**
* ipc_init_proc_interface - create a proc interface for sysipc types using a seq_file interface.
* @path: Path in procfs
@@ -151,7 +151,7 @@ void __init ipc_init_proc_interface(cons
pde = proc_create_data(path,
S_IRUGO, /* world readable */
NULL, /* parent dir */
- &sysvipc_proc_fops,
+ &sysvipc_proc_ops,
iface);
if (!pde)
kfree(iface);
@@ -884,10 +884,10 @@ static int sysvipc_proc_release(struct i
return seq_release_private(inode, file);
}
-static const struct file_operations sysvipc_proc_fops = {
- .open = sysvipc_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = sysvipc_proc_release,
+static const struct proc_ops sysvipc_proc_ops = {
+ .proc_open = sysvipc_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = sysvipc_proc_release,
};
#endif /* CONFIG_PROC_FS */
--- a/kernel/configs.c~proc-convert-everything-to-struct-proc_ops
+++ a/kernel/configs.c
@@ -47,10 +47,9 @@ ikconfig_read_current(struct file *file,
&kernel_config_data);
}
-static const struct file_operations ikconfig_file_ops = {
- .owner = THIS_MODULE,
- .read = ikconfig_read_current,
- .llseek = default_llseek,
+static const struct proc_ops config_gz_proc_ops = {
+ .proc_read = ikconfig_read_current,
+ .proc_lseek = default_llseek,
};
static int __init ikconfig_init(void)
@@ -59,7 +58,7 @@ static int __init ikconfig_init(void)
/* create the current config file */
entry = proc_create("config.gz", S_IFREG | S_IRUGO, NULL,
- &ikconfig_file_ops);
+ &config_gz_proc_ops);
if (!entry)
return -ENOMEM;
--- a/kernel/irq/proc.c~proc-convert-everything-to-struct-proc_ops
+++ a/kernel/irq/proc.c
@@ -176,20 +176,20 @@ static int irq_affinity_list_proc_open(s
return single_open(file, irq_affinity_list_proc_show, PDE_DATA(inode));
}
-static const struct file_operations irq_affinity_proc_fops = {
- .open = irq_affinity_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = irq_affinity_proc_write,
+static const struct proc_ops irq_affinity_proc_ops = {
+ .proc_open = irq_affinity_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = irq_affinity_proc_write,
};
-static const struct file_operations irq_affinity_list_proc_fops = {
- .open = irq_affinity_list_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = irq_affinity_list_proc_write,
+static const struct proc_ops irq_affinity_list_proc_ops = {
+ .proc_open = irq_affinity_list_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = irq_affinity_list_proc_write,
};
#ifdef CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK
@@ -246,12 +246,12 @@ static int default_affinity_open(struct
return single_open(file, default_affinity_show, PDE_DATA(inode));
}
-static const struct file_operations default_affinity_proc_fops = {
- .open = default_affinity_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = default_affinity_write,
+static const struct proc_ops default_affinity_proc_ops = {
+ .proc_open = default_affinity_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = default_affinity_write,
};
static int irq_node_proc_show(struct seq_file *m, void *v)
@@ -342,7 +342,7 @@ void register_irq_proc(unsigned int irq,
#ifdef CONFIG_SMP
/* create /proc/irq/<irq>/smp_affinity */
proc_create_data("smp_affinity", 0644, desc->dir,
- &irq_affinity_proc_fops, irqp);
+ &irq_affinity_proc_ops, irqp);
/* create /proc/irq/<irq>/affinity_hint */
proc_create_single_data("affinity_hint", 0444, desc->dir,
@@ -350,7 +350,7 @@ void register_irq_proc(unsigned int irq,
/* create /proc/irq/<irq>/smp_affinity_list */
proc_create_data("smp_affinity_list", 0644, desc->dir,
- &irq_affinity_list_proc_fops, irqp);
+ &irq_affinity_list_proc_ops, irqp);
proc_create_single_data("node", 0444, desc->dir, irq_node_proc_show,
irqp);
@@ -401,7 +401,7 @@ static void register_default_affinity_pr
{
#ifdef CONFIG_SMP
proc_create("irq/default_smp_affinity", 0644, NULL,
- &default_affinity_proc_fops);
+ &default_affinity_proc_ops);
#endif
}
--- a/kernel/kallsyms.c~proc-convert-everything-to-struct-proc_ops
+++ a/kernel/kallsyms.c
@@ -698,16 +698,16 @@ const char *kdb_walk_kallsyms(loff_t *po
}
#endif /* CONFIG_KGDB_KDB */
-static const struct file_operations kallsyms_operations = {
- .open = kallsyms_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release_private,
+static const struct proc_ops kallsyms_proc_ops = {
+ .proc_open = kallsyms_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = seq_release_private,
};
static int __init kallsyms_init(void)
{
- proc_create("kallsyms", 0444, NULL, &kallsyms_operations);
+ proc_create("kallsyms", 0444, NULL, &kallsyms_proc_ops);
return 0;
}
device_initcall(kallsyms_init);
--- a/kernel/latencytop.c~proc-convert-everything-to-struct-proc_ops
+++ a/kernel/latencytop.c
@@ -255,17 +255,17 @@ static int lstats_open(struct inode *ino
return single_open(filp, lstats_show, NULL);
}
-static const struct file_operations lstats_fops = {
- .open = lstats_open,
- .read = seq_read,
- .write = lstats_write,
- .llseek = seq_lseek,
- .release = single_release,
+static const struct proc_ops lstats_proc_ops = {
+ .proc_open = lstats_open,
+ .proc_read = seq_read,
+ .proc_write = lstats_write,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
};
static int __init init_lstats_procfs(void)
{
- proc_create("latency_stats", 0644, NULL, &lstats_fops);
+ proc_create("latency_stats", 0644, NULL, &lstats_proc_ops);
return 0;
}
--- a/kernel/locking/lockdep_proc.c~proc-convert-everything-to-struct-proc_ops
+++ a/kernel/locking/lockdep_proc.c
@@ -643,12 +643,12 @@ static int lock_stat_release(struct inod
return seq_release(inode, file);
}
-static const struct file_operations proc_lock_stat_operations = {
- .open = lock_stat_open,
- .write = lock_stat_write,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = lock_stat_release,
+static const struct proc_ops lock_stat_proc_ops = {
+ .proc_open = lock_stat_open,
+ .proc_write = lock_stat_write,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = lock_stat_release,
};
#endif /* CONFIG_LOCK_STAT */
@@ -660,8 +660,7 @@ static int __init lockdep_proc_init(void
#endif
proc_create_single("lockdep_stats", S_IRUSR, NULL, lockdep_stats_show);
#ifdef CONFIG_LOCK_STAT
- proc_create("lock_stat", S_IRUSR | S_IWUSR, NULL,
- &proc_lock_stat_operations);
+ proc_create("lock_stat", S_IRUSR | S_IWUSR, NULL, &lock_stat_proc_ops);
#endif
return 0;
--- a/kernel/module.c~proc-convert-everything-to-struct-proc_ops
+++ a/kernel/module.c
@@ -4354,16 +4354,16 @@ static int modules_open(struct inode *in
return err;
}
-static const struct file_operations proc_modules_operations = {
- .open = modules_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
+static const struct proc_ops modules_proc_ops = {
+ .proc_open = modules_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = seq_release,
};
static int __init proc_modules_init(void)
{
- proc_create("modules", 0, NULL, &proc_modules_operations);
+ proc_create("modules", 0, NULL, &modules_proc_ops);
return 0;
}
module_init(proc_modules_init);
--- a/kernel/profile.c~proc-convert-everything-to-struct-proc_ops
+++ a/kernel/profile.c
@@ -442,18 +442,18 @@ static ssize_t prof_cpu_mask_proc_write(
return err;
}
-static const struct file_operations prof_cpu_mask_proc_fops = {
- .open = prof_cpu_mask_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = prof_cpu_mask_proc_write,
+static const struct proc_ops prof_cpu_mask_proc_ops = {
+ .proc_open = prof_cpu_mask_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+ .proc_write = prof_cpu_mask_proc_write,
};
void create_prof_cpu_mask(void)
{
/* create /proc/irq/prof_cpu_mask */
- proc_create("irq/prof_cpu_mask", 0600, NULL, &prof_cpu_mask_proc_fops);
+ proc_create("irq/prof_cpu_mask", 0600, NULL, &prof_cpu_mask_proc_ops);
}
/*
@@ -517,10 +517,10 @@ static ssize_t write_profile(struct file
return count;
}
-static const struct file_operations proc_profile_operations = {
- .read = read_profile,
- .write = write_profile,
- .llseek = default_llseek,
+static const struct proc_ops profile_proc_ops = {
+ .proc_read = read_profile,
+ .proc_write = write_profile,
+ .proc_lseek = default_llseek,
};
int __ref create_proc_profile(void)
@@ -548,7 +548,7 @@ int __ref create_proc_profile(void)
err = 0;
#endif
entry = proc_create("profile", S_IWUSR | S_IRUGO,
- NULL, &proc_profile_operations);
+ NULL, &profile_proc_ops);
if (!entry)
goto err_state_onl;
proc_set_size(entry, (1 + prof_len) * sizeof(atomic_t));
--- a/kernel/sched/psi.c~proc-convert-everything-to-struct-proc_ops
+++ a/kernel/sched/psi.c
@@ -1251,40 +1251,40 @@ static int psi_fop_release(struct inode
return single_release(inode, file);
}
-static const struct file_operations psi_io_fops = {
- .open = psi_io_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = psi_io_write,
- .poll = psi_fop_poll,
- .release = psi_fop_release,
+static const struct proc_ops psi_io_proc_ops = {
+ .proc_open = psi_io_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_write = psi_io_write,
+ .proc_poll = psi_fop_poll,
+ .proc_release = psi_fop_release,
};
-static const struct file_operations psi_memory_fops = {
- .open = psi_memory_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = psi_memory_write,
- .poll = psi_fop_poll,
- .release = psi_fop_release,
+static const struct proc_ops psi_memory_proc_ops = {
+ .proc_open = psi_memory_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_write = psi_memory_write,
+ .proc_poll = psi_fop_poll,
+ .proc_release = psi_fop_release,
};
-static const struct file_operations psi_cpu_fops = {
- .open = psi_cpu_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = psi_cpu_write,
- .poll = psi_fop_poll,
- .release = psi_fop_release,
+static const struct proc_ops psi_cpu_proc_ops = {
+ .proc_open = psi_cpu_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_write = psi_cpu_write,
+ .proc_poll = psi_fop_poll,
+ .proc_release = psi_fop_release,
};
static int __init psi_proc_init(void)
{
if (psi_enable) {
proc_mkdir("pressure", NULL);
- proc_create("pressure/io", 0, NULL, &psi_io_fops);
- proc_create("pressure/memory", 0, NULL, &psi_memory_fops);
- proc_create("pressure/cpu", 0, NULL, &psi_cpu_fops);
+ proc_create("pressure/io", 0, NULL, &psi_io_proc_ops);
+ proc_create("pressure/memory", 0, NULL, &psi_memory_proc_ops);
+ proc_create("pressure/cpu", 0, NULL, &psi_cpu_proc_ops);
}
return 0;
}
--- a/mm/slab_common.c~proc-convert-everything-to-struct-proc_ops
+++ a/mm/slab_common.c
@@ -1580,18 +1580,17 @@ static int slabinfo_open(struct inode *i
return seq_open(file, &slabinfo_op);
}
-static const struct file_operations proc_slabinfo_operations = {
- .open = slabinfo_open,
- .read = seq_read,
- .write = slabinfo_write,
- .llseek = seq_lseek,
- .release = seq_release,
+static const struct proc_ops slabinfo_proc_ops = {
+ .proc_open = slabinfo_open,
+ .proc_read = seq_read,
+ .proc_write = slabinfo_write,
+ .proc_lseek = seq_lseek,
+ .proc_release = seq_release,
};
static int __init slab_proc_init(void)
{
- proc_create("slabinfo", SLABINFO_RIGHTS, NULL,
- &proc_slabinfo_operations);
+ proc_create("slabinfo", SLABINFO_RIGHTS, NULL, &slabinfo_proc_ops);
return 0;
}
module_init(slab_proc_init);
--- a/mm/swapfile.c~proc-convert-everything-to-struct-proc_ops
+++ a/mm/swapfile.c
@@ -2796,17 +2796,17 @@ static int swaps_open(struct inode *inod
return 0;
}
-static const struct file_operations proc_swaps_operations = {
- .open = swaps_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
- .poll = swaps_poll,
+static const struct proc_ops swaps_proc_ops = {
+ .proc_open = swaps_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = seq_release,
+ .proc_poll = swaps_poll,
};
static int __init procswaps_init(void)
{
- proc_create("swaps", 0, NULL, &proc_swaps_operations);
+ proc_create("swaps", 0, NULL, &swaps_proc_ops);
return 0;
}
__initcall(procswaps_init);
--- a/net/atm/mpoa_proc.c~proc-convert-everything-to-struct-proc_ops
+++ a/net/atm/mpoa_proc.c
@@ -53,15 +53,12 @@ static ssize_t proc_mpc_write(struct fil
static int parse_qos(const char *buff);
-/*
- * Define allowed FILE OPERATIONS
- */
-static const struct file_operations mpc_file_operations = {
- .open = proc_mpc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = proc_mpc_write,
- .release = seq_release,
+static const struct proc_ops mpc_proc_ops = {
+ .proc_open = proc_mpc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_write = proc_mpc_write,
+ .proc_release = seq_release,
};
/*
@@ -290,7 +287,7 @@ int mpc_proc_init(void)
{
struct proc_dir_entry *p;
- p = proc_create(STAT_FILE_NAME, 0, atm_proc_root, &mpc_file_operations);
+ p = proc_create(STAT_FILE_NAME, 0, atm_proc_root, &mpc_proc_ops);
if (!p) {
pr_err("Unable to initialize /proc/atm/%s\n", STAT_FILE_NAME);
return -ENOMEM;
--- a/net/atm/proc.c~proc-convert-everything-to-struct-proc_ops
+++ a/net/atm/proc.c
@@ -36,9 +36,9 @@
static ssize_t proc_dev_atm_read(struct file *file, char __user *buf,
size_t count, loff_t *pos);
-static const struct file_operations proc_atm_dev_ops = {
- .read = proc_dev_atm_read,
- .llseek = noop_llseek,
+static const struct proc_ops atm_dev_proc_ops = {
+ .proc_read = proc_dev_atm_read,
+ .proc_lseek = noop_llseek,
};
static void add_stats(struct seq_file *seq, const char *aal,
@@ -359,7 +359,7 @@ int atm_proc_dev_register(struct atm_dev
goto err_out;
dev->proc_entry = proc_create_data(dev->proc_name, 0, atm_proc_root,
- &proc_atm_dev_ops, dev);
+ &atm_dev_proc_ops, dev);
if (!dev->proc_entry)
goto err_free_name;
return 0;
--- a/net/core/pktgen.c~proc-convert-everything-to-struct-proc_ops
+++ a/net/core/pktgen.c
@@ -535,12 +535,12 @@ static int pgctrl_open(struct inode *ino
return single_open(file, pgctrl_show, PDE_DATA(inode));
}
-static const struct file_operations pktgen_fops = {
- .open = pgctrl_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = pgctrl_write,
- .release = single_release,
+static const struct proc_ops pktgen_proc_ops = {
+ .proc_open = pgctrl_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_write = pgctrl_write,
+ .proc_release = single_release,
};
static int pktgen_if_show(struct seq_file *seq, void *v)
@@ -1707,12 +1707,12 @@ static int pktgen_if_open(struct inode *
return single_open(file, pktgen_if_show, PDE_DATA(inode));
}
-static const struct file_operations pktgen_if_fops = {
- .open = pktgen_if_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = pktgen_if_write,
- .release = single_release,
+static const struct proc_ops pktgen_if_proc_ops = {
+ .proc_open = pktgen_if_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_write = pktgen_if_write,
+ .proc_release = single_release,
};
static int pktgen_thread_show(struct seq_file *seq, void *v)
@@ -1844,12 +1844,12 @@ static int pktgen_thread_open(struct ino
return single_open(file, pktgen_thread_show, PDE_DATA(inode));
}
-static const struct file_operations pktgen_thread_fops = {
- .open = pktgen_thread_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .write = pktgen_thread_write,
- .release = single_release,
+static const struct proc_ops pktgen_thread_proc_ops = {
+ .proc_open = pktgen_thread_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_write = pktgen_thread_write,
+ .proc_release = single_release,
};
/* Think find or remove for NN */
@@ -1926,7 +1926,7 @@ static void pktgen_change_name(const str
pkt_dev->entry = proc_create_data(dev->name, 0600,
pn->proc_dir,
- &pktgen_if_fops,
+ &pktgen_if_proc_ops,
pkt_dev);
if (!pkt_dev->entry)
pr_err("can't move proc entry for '%s'\n",
@@ -3638,7 +3638,7 @@ static int pktgen_add_device(struct pktg
pkt_dev->clone_skb = pg_clone_skb_d;
pkt_dev->entry = proc_create_data(ifname, 0600, t->net->proc_dir,
- &pktgen_if_fops, pkt_dev);
+ &pktgen_if_proc_ops, pkt_dev);
if (!pkt_dev->entry) {
pr_err("cannot create %s/%s procfs entry\n",
PG_PROC_DIR, ifname);
@@ -3708,7 +3708,7 @@ static int __net_init pktgen_create_thre
t->tsk = p;
pe = proc_create_data(t->tsk->comm, 0600, pn->proc_dir,
- &pktgen_thread_fops, t);
+ &pktgen_thread_proc_ops, t);
if (!pe) {
pr_err("cannot create %s/%s procfs entry\n",
PG_PROC_DIR, t->tsk->comm);
@@ -3793,7 +3793,7 @@ static int __net_init pg_net_init(struct
pr_warn("cannot create /proc/net/%s\n", PG_PROC_DIR);
return -ENODEV;
}
- pe = proc_create(PGCTRL, 0600, pn->proc_dir, &pktgen_fops);
+ pe = proc_create(PGCTRL, 0600, pn->proc_dir, &pktgen_proc_ops);
if (pe == NULL) {
pr_err("cannot create %s procfs entry\n", PGCTRL);
ret = -EINVAL;
--- a/net/ipv4/ipconfig.c~proc-convert-everything-to-struct-proc_ops
+++ a/net/ipv4/ipconfig.c
@@ -1334,7 +1334,7 @@ static int __init ipconfig_proc_net_init
/* Create a new file under /proc/net/ipconfig */
static int ipconfig_proc_net_create(const char *name,
- const struct file_operations *fops)
+ const struct proc_ops *proc_ops)
{
char *pname;
struct proc_dir_entry *p;
@@ -1346,7 +1346,7 @@ static int ipconfig_proc_net_create(cons
if (!pname)
return -ENOMEM;
- p = proc_create(pname, 0444, init_net.proc_net, fops);
+ p = proc_create(pname, 0444, init_net.proc_net, proc_ops);
kfree(pname);
if (!p)
return -ENOMEM;
@@ -1355,7 +1355,7 @@ static int ipconfig_proc_net_create(cons
}
/* Write NTP server IP addresses to /proc/net/ipconfig/ntp_servers */
-static int ntp_servers_seq_show(struct seq_file *seq, void *v)
+static int ntp_servers_show(struct seq_file *seq, void *v)
{
int i;
@@ -1365,7 +1365,7 @@ static int ntp_servers_seq_show(struct s
}
return 0;
}
-DEFINE_SHOW_ATTRIBUTE(ntp_servers_seq);
+DEFINE_PROC_SHOW_ATTRIBUTE(ntp_servers);
#endif /* CONFIG_PROC_FS */
/*
@@ -1456,7 +1456,7 @@ static int __init ip_auto_config(void)
proc_create_single("pnp", 0444, init_net.proc_net, pnp_seq_show);
if (ipconfig_proc_net_init() == 0)
- ipconfig_proc_net_create("ntp_servers", &ntp_servers_seq_fops);
+ ipconfig_proc_net_create("ntp_servers", &ntp_servers_proc_ops);
#endif /* CONFIG_PROC_FS */
if (!ic_enable)
--- a/net/ipv4/netfilter/ipt_CLUSTERIP.c~proc-convert-everything-to-struct-proc_ops
+++ a/net/ipv4/netfilter/ipt_CLUSTERIP.c
@@ -58,7 +58,7 @@ struct clusterip_config {
};
#ifdef CONFIG_PROC_FS
-static const struct file_operations clusterip_proc_fops;
+static const struct proc_ops clusterip_proc_ops;
#endif
struct clusterip_net {
@@ -280,7 +280,7 @@ clusterip_config_init(struct net *net, c
mutex_lock(&cn->mutex);
c->pde = proc_create_data(buffer, 0600,
cn->procdir,
- &clusterip_proc_fops, c);
+ &clusterip_proc_ops, c);
mutex_unlock(&cn->mutex);
if (!c->pde) {
err = -ENOMEM;
@@ -804,12 +804,12 @@ static ssize_t clusterip_proc_write(stru
return size;
}
-static const struct file_operations clusterip_proc_fops = {
- .open = clusterip_proc_open,
- .read = seq_read,
- .write = clusterip_proc_write,
- .llseek = seq_lseek,
- .release = clusterip_proc_release,
+static const struct proc_ops clusterip_proc_ops = {
+ .proc_open = clusterip_proc_open,
+ .proc_read = seq_read,
+ .proc_write = clusterip_proc_write,
+ .proc_lseek = seq_lseek,
+ .proc_release = clusterip_proc_release,
};
#endif /* CONFIG_PROC_FS */
--- a/net/ipv4/route.c~proc-convert-everything-to-struct-proc_ops
+++ a/net/ipv4/route.c
@@ -237,11 +237,11 @@ static int rt_cache_seq_open(struct inod
return seq_open(file, &rt_cache_seq_ops);
}
-static const struct file_operations rt_cache_seq_fops = {
- .open = rt_cache_seq_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
+static const struct proc_ops rt_cache_proc_ops = {
+ .proc_open = rt_cache_seq_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = seq_release,
};
@@ -328,11 +328,11 @@ static int rt_cpu_seq_open(struct inode
return seq_open(file, &rt_cpu_seq_ops);
}
-static const struct file_operations rt_cpu_seq_fops = {
- .open = rt_cpu_seq_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
+static const struct proc_ops rt_cpu_proc_ops = {
+ .proc_open = rt_cpu_seq_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = seq_release,
};
#ifdef CONFIG_IP_ROUTE_CLASSID
@@ -366,12 +366,12 @@ static int __net_init ip_rt_do_proc_init
struct proc_dir_entry *pde;
pde = proc_create("rt_cache", 0444, net->proc_net,
- &rt_cache_seq_fops);
+ &rt_cache_proc_ops);
if (!pde)
goto err1;
pde = proc_create("rt_cache", 0444,
- net->proc_net_stat, &rt_cpu_seq_fops);
+ net->proc_net_stat, &rt_cpu_proc_ops);
if (!pde)
goto err2;
--- a/net/netfilter/xt_recent.c~proc-convert-everything-to-struct-proc_ops
+++ a/net/netfilter/xt_recent.c
@@ -103,7 +103,7 @@ static DEFINE_SPINLOCK(recent_lock);
static DEFINE_MUTEX(recent_mutex);
#ifdef CONFIG_PROC_FS
-static const struct file_operations recent_mt_fops;
+static const struct proc_ops recent_mt_proc_ops;
#endif
static u_int32_t hash_rnd __read_mostly;
@@ -405,7 +405,7 @@ static int recent_mt_check(const struct
goto out;
}
pde = proc_create_data(t->name, ip_list_perms, recent_net->xt_recent,
- &recent_mt_fops, t);
+ &recent_mt_proc_ops, t);
if (pde == NULL) {
recent_table_free(t);
ret = -ENOMEM;
@@ -616,13 +616,12 @@ recent_mt_proc_write(struct file *file,
return size + 1;
}
-static const struct file_operations recent_mt_fops = {
- .open = recent_seq_open,
- .read = seq_read,
- .write = recent_mt_proc_write,
- .release = seq_release_private,
- .owner = THIS_MODULE,
- .llseek = seq_lseek,
+static const struct proc_ops recent_mt_proc_ops = {
+ .proc_open = recent_seq_open,
+ .proc_read = seq_read,
+ .proc_write = recent_mt_proc_write,
+ .proc_release = seq_release_private,
+ .proc_lseek = seq_lseek,
};
static int __net_init recent_proc_net_init(struct net *net)
--- a/net/sunrpc/auth_gss/svcauth_gss.c~proc-convert-everything-to-struct-proc_ops
+++ a/net/sunrpc/auth_gss/svcauth_gss.c
@@ -1428,10 +1428,10 @@ static ssize_t read_gssp(struct file *fi
return len;
}
-static const struct file_operations use_gss_proxy_ops = {
- .open = nonseekable_open,
- .write = write_gssp,
- .read = read_gssp,
+static const struct proc_ops use_gss_proxy_proc_ops = {
+ .proc_open = nonseekable_open,
+ .proc_write = write_gssp,
+ .proc_read = read_gssp,
};
static int create_use_gss_proxy_proc_entry(struct net *net)
@@ -1442,7 +1442,7 @@ static int create_use_gss_proxy_proc_ent
sn->use_gss_proxy = -1;
*p = proc_create_data("use-gss-proxy", S_IFREG | 0600,
sn->proc_net_rpc,
- &use_gss_proxy_ops, net);
+ &use_gss_proxy_proc_ops, net);
if (!*p)
return -ENOMEM;
init_gssp_clnt(sn);
--- a/net/sunrpc/cache.c~proc-convert-everything-to-struct-proc_ops
+++ a/net/sunrpc/cache.c
@@ -1571,15 +1571,14 @@ static int cache_release_procfs(struct i
return cache_release(inode, filp, cd);
}
-static const struct file_operations cache_file_operations_procfs = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .read = cache_read_procfs,
- .write = cache_write_procfs,
- .poll = cache_poll_procfs,
- .unlocked_ioctl = cache_ioctl_procfs, /* for FIONREAD */
- .open = cache_open_procfs,
- .release = cache_release_procfs,
+static const struct proc_ops cache_channel_proc_ops = {
+ .proc_lseek = no_llseek,
+ .proc_read = cache_read_procfs,
+ .proc_write = cache_write_procfs,
+ .proc_poll = cache_poll_procfs,
+ .proc_ioctl = cache_ioctl_procfs, /* for FIONREAD */
+ .proc_open = cache_open_procfs,
+ .proc_release = cache_release_procfs,
};
static int content_open_procfs(struct inode *inode, struct file *filp)
@@ -1596,11 +1595,11 @@ static int content_release_procfs(struct
return content_release(inode, filp, cd);
}
-static const struct file_operations content_file_operations_procfs = {
- .open = content_open_procfs,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = content_release_procfs,
+static const struct proc_ops content_proc_ops = {
+ .proc_open = content_open_procfs,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = content_release_procfs,
};
static int open_flush_procfs(struct inode *inode, struct file *filp)
@@ -1634,12 +1633,12 @@ static ssize_t write_flush_procfs(struct
return write_flush(filp, buf, count, ppos, cd);
}
-static const struct file_operations cache_flush_operations_procfs = {
- .open = open_flush_procfs,
- .read = read_flush_procfs,
- .write = write_flush_procfs,
- .release = release_flush_procfs,
- .llseek = no_llseek,
+static const struct proc_ops cache_flush_proc_ops = {
+ .proc_open = open_flush_procfs,
+ .proc_read = read_flush_procfs,
+ .proc_write = write_flush_procfs,
+ .proc_release = release_flush_procfs,
+ .proc_lseek = no_llseek,
};
static void remove_cache_proc_entries(struct cache_detail *cd)
@@ -1662,19 +1661,19 @@ static int create_cache_proc_entries(str
goto out_nomem;
p = proc_create_data("flush", S_IFREG | 0600,
- cd->procfs, &cache_flush_operations_procfs, cd);
+ cd->procfs, &cache_flush_proc_ops, cd);
if (p == NULL)
goto out_nomem;
if (cd->cache_request || cd->cache_parse) {
p = proc_create_data("channel", S_IFREG | 0600, cd->procfs,
- &cache_file_operations_procfs, cd);
+ &cache_channel_proc_ops, cd);
if (p == NULL)
goto out_nomem;
}
if (cd->cache_show) {
p = proc_create_data("content", S_IFREG | 0400, cd->procfs,
- &content_file_operations_procfs, cd);
+ &content_proc_ops, cd);
if (p == NULL)
goto out_nomem;
}
--- a/net/sunrpc/stats.c~proc-convert-everything-to-struct-proc_ops
+++ a/net/sunrpc/stats.c
@@ -69,12 +69,11 @@ static int rpc_proc_open(struct inode *i
return single_open(file, rpc_proc_show, PDE_DATA(inode));
}
-static const struct file_operations rpc_proc_fops = {
- .owner = THIS_MODULE,
- .open = rpc_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
+static const struct proc_ops rpc_proc_ops = {
+ .proc_open = rpc_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
};
/*
@@ -281,19 +280,19 @@ EXPORT_SYMBOL_GPL(rpc_clnt_show_stats);
*/
static inline struct proc_dir_entry *
do_register(struct net *net, const char *name, void *data,
- const struct file_operations *fops)
+ const struct proc_ops *proc_ops)
{
struct sunrpc_net *sn;
dprintk("RPC: registering /proc/net/rpc/%s\n", name);
sn = net_generic(net, sunrpc_net_id);
- return proc_create_data(name, 0, sn->proc_net_rpc, fops, data);
+ return proc_create_data(name, 0, sn->proc_net_rpc, proc_ops, data);
}
struct proc_dir_entry *
rpc_proc_register(struct net *net, struct rpc_stat *statp)
{
- return do_register(net, statp->program->name, statp, &rpc_proc_fops);
+ return do_register(net, statp->program->name, statp, &rpc_proc_ops);
}
EXPORT_SYMBOL_GPL(rpc_proc_register);
@@ -308,9 +307,9 @@ rpc_proc_unregister(struct net *net, con
EXPORT_SYMBOL_GPL(rpc_proc_unregister);
struct proc_dir_entry *
-svc_proc_register(struct net *net, struct svc_stat *statp, const struct file_operations *fops)
+svc_proc_register(struct net *net, struct svc_stat *statp, const struct proc_ops *proc_ops)
{
- return do_register(net, statp->program->pg_name, statp, fops);
+ return do_register(net, statp->program->pg_name, statp, proc_ops);
}
EXPORT_SYMBOL_GPL(svc_proc_register);
--- a/samples/kfifo/bytestream-example.c~proc-convert-everything-to-struct-proc_ops
+++ a/samples/kfifo/bytestream-example.c
@@ -142,11 +142,10 @@ static ssize_t fifo_read(struct file *fi
return ret ? ret : copied;
}
-static const struct file_operations fifo_fops = {
- .owner = THIS_MODULE,
- .read = fifo_read,
- .write = fifo_write,
- .llseek = noop_llseek,
+static const struct proc_ops fifo_proc_ops = {
+ .proc_read = fifo_read,
+ .proc_write = fifo_write,
+ .proc_lseek = noop_llseek,
};
static int __init example_init(void)
@@ -169,7 +168,7 @@ static int __init example_init(void)
return -EIO;
}
- if (proc_create(PROC_FIFO, 0, NULL, &fifo_fops) == NULL) {
+ if (proc_create(PROC_FIFO, 0, NULL, &fifo_proc_ops) == NULL) {
#ifdef DYNAMIC
kfifo_free(&test);
#endif
--- a/samples/kfifo/inttype-example.c~proc-convert-everything-to-struct-proc_ops
+++ a/samples/kfifo/inttype-example.c
@@ -135,11 +135,10 @@ static ssize_t fifo_read(struct file *fi
return ret ? ret : copied;
}
-static const struct file_operations fifo_fops = {
- .owner = THIS_MODULE,
- .read = fifo_read,
- .write = fifo_write,
- .llseek = noop_llseek,
+static const struct proc_ops fifo_proc_ops = {
+ .proc_read = fifo_read,
+ .proc_write = fifo_write,
+ .proc_lseek = noop_llseek,
};
static int __init example_init(void)
@@ -160,7 +159,7 @@ static int __init example_init(void)
return -EIO;
}
- if (proc_create(PROC_FIFO, 0, NULL, &fifo_fops) == NULL) {
+ if (proc_create(PROC_FIFO, 0, NULL, &fifo_proc_ops) == NULL) {
#ifdef DYNAMIC
kfifo_free(&test);
#endif
--- a/samples/kfifo/record-example.c~proc-convert-everything-to-struct-proc_ops
+++ a/samples/kfifo/record-example.c
@@ -149,11 +149,10 @@ static ssize_t fifo_read(struct file *fi
return ret ? ret : copied;
}
-static const struct file_operations fifo_fops = {
- .owner = THIS_MODULE,
- .read = fifo_read,
- .write = fifo_write,
- .llseek = noop_llseek,
+static const struct proc_ops fifo_proc_ops = {
+ .proc_read = fifo_read,
+ .proc_write = fifo_write,
+ .proc_lseek = noop_llseek,
};
static int __init example_init(void)
@@ -176,7 +175,7 @@ static int __init example_init(void)
return -EIO;
}
- if (proc_create(PROC_FIFO, 0, NULL, &fifo_fops) == NULL) {
+ if (proc_create(PROC_FIFO, 0, NULL, &fifo_proc_ops) == NULL) {
#ifdef DYNAMIC
kfifo_free(&test);
#endif
--- a/sound/core/info.c~proc-convert-everything-to-struct-proc_ops
+++ a/sound/core/info.c
@@ -282,17 +282,16 @@ static int snd_info_entry_release(struct
return 0;
}
-static const struct file_operations snd_info_entry_operations =
+static const struct proc_ops snd_info_entry_operations =
{
- .owner = THIS_MODULE,
- .llseek = snd_info_entry_llseek,
- .read = snd_info_entry_read,
- .write = snd_info_entry_write,
- .poll = snd_info_entry_poll,
- .unlocked_ioctl = snd_info_entry_ioctl,
- .mmap = snd_info_entry_mmap,
- .open = snd_info_entry_open,
- .release = snd_info_entry_release,
+ .proc_lseek = snd_info_entry_llseek,
+ .proc_read = snd_info_entry_read,
+ .proc_write = snd_info_entry_write,
+ .proc_poll = snd_info_entry_poll,
+ .proc_ioctl = snd_info_entry_ioctl,
+ .proc_mmap = snd_info_entry_mmap,
+ .proc_open = snd_info_entry_open,
+ .proc_release = snd_info_entry_release,
};
/*
@@ -421,14 +420,13 @@ static int snd_info_text_entry_release(s
return 0;
}
-static const struct file_operations snd_info_text_entry_ops =
+static const struct proc_ops snd_info_text_entry_ops =
{
- .owner = THIS_MODULE,
- .open = snd_info_text_entry_open,
- .release = snd_info_text_entry_release,
- .write = snd_info_text_entry_write,
- .llseek = seq_lseek,
- .read = seq_read,
+ .proc_open = snd_info_text_entry_open,
+ .proc_release = snd_info_text_entry_release,
+ .proc_write = snd_info_text_entry_write,
+ .proc_lseek = seq_lseek,
+ .proc_read = seq_read,
};
static struct snd_info_entry *create_subdir(struct module *mod,
@@ -810,7 +808,7 @@ static int __snd_info_register(struct sn
return -ENOMEM;
}
} else {
- const struct file_operations *ops;
+ const struct proc_ops *ops;
if (entry->content == SNDRV_INFO_CONTENT_DATA)
ops = &snd_info_entry_operations;
else
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 59/67] lib/string: add strnchrnul()
2020-02-04 1:33 incoming Andrew Morton
` (57 preceding siblings ...)
2020-02-04 1:37 ` [patch 58/67] proc: convert everything to " Andrew Morton
@ 2020-02-04 1:37 ` Andrew Morton
2020-02-04 1:37 ` [patch 60/67] bitops: more BITS_TO_* macros Andrew Morton
` (10 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:37 UTC (permalink / raw)
To: acme, akpm, amritha.nambiar, andriy.shevchenko, chris, keescook,
linux-mm, linux, mm-commits, mszeredi, steffen.klassert, tobin,
torvalds, vineet.gupta1, will.deacon, willemb, willy, yury.norov
From: Yury Norov <yury.norov@gmail.com>
Subject: lib/string: add strnchrnul()
Patch series "lib: rework bitmap_parse", v5.
Similarl to the recently revisited bitmap_parselist(), bitmap_parse() is
ineffective and overcomplicated. This series reworks it, aligns its
interface with bitmap_parselist() and makes it simpler to use.
The series also adds a test for the function and fixes usage of it in
cpumask_parse() according to the new design - drops the calculating of
length of an input string.
bitmap_parse() takes the array of numbers to be put into the map in the BE
order which is reversed to the natural LE order for bitmaps. For example,
to construct bitmap containing a bit on the position 42, we have to put a
line '400,0'. Current implementation reads chunk one by one from the
beginning ('400' before '0') and makes bitmap shift after each successful
parse. It makes the complexity of the whole process as O(n^2). We can do
it in reverse direction ('0' before '400') and avoid shifting, but it
requires reverse parsing helpers.
This patch (of 7):
New function works like strchrnul() with a length limited string.
Link: http://lkml.kernel.org/r/20200102043031.30357-2-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Amritha Nambiar <amritha.nambiar@intel.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Tobin C . Harding" <tobin@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/linux/string.h | 1 +
lib/string.c | 17 +++++++++++++++++
2 files changed, 18 insertions(+)
--- a/include/linux/string.h~lib-string-add-strnchrnul
+++ a/include/linux/string.h
@@ -62,6 +62,7 @@ extern char * strchr(const char *,int);
#ifndef __HAVE_ARCH_STRCHRNUL
extern char * strchrnul(const char *,int);
#endif
+extern char * strnchrnul(const char *, size_t, int);
#ifndef __HAVE_ARCH_STRNCHR
extern char * strnchr(const char *, size_t, int);
#endif
--- a/lib/string.c~lib-string-add-strnchrnul
+++ a/lib/string.c
@@ -434,6 +434,23 @@ char *strchrnul(const char *s, int c)
EXPORT_SYMBOL(strchrnul);
#endif
+/**
+ * strnchrnul - Find and return a character in a length limited string,
+ * or end of string
+ * @s: The string to be searched
+ * @count: The number of characters to be searched
+ * @c: The character to search for
+ *
+ * Returns pointer to the first occurrence of 'c' in s. If c is not found,
+ * then return a pointer to the last character of the string.
+ */
+char *strnchrnul(const char *s, size_t count, int c)
+{
+ while (count-- && *s && *s != (char)c)
+ s++;
+ return (char *)s;
+}
+
#ifndef __HAVE_ARCH_STRRCHR
/**
* strrchr - Find the last occurrence of a character in a string
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 60/67] bitops: more BITS_TO_* macros
2020-02-04 1:33 incoming Andrew Morton
` (58 preceding siblings ...)
2020-02-04 1:37 ` [patch 59/67] lib/string: add strnchrnul() Andrew Morton
@ 2020-02-04 1:37 ` Andrew Morton
2020-02-04 1:37 ` [patch 61/67] lib: add test for bitmap_parse() Andrew Morton
` (9 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:37 UTC (permalink / raw)
To: acme, akpm, amritha.nambiar, andriy.shevchenko, chris, keescook,
linux-mm, linux, mm-commits, mszeredi, steffen.klassert, tobin,
torvalds, vineet.gupta1, will.deacon, willemb, willy, yury.norov
From: Yury Norov <yury.norov@gmail.com>
Subject: bitops: more BITS_TO_* macros
Introduce BITS_TO_U64, BITS_TO_U32 and BITS_TO_BYTES as they are handy in
the following patches (BITS_TO_U32 specifically). Reimplement tools/
version of the macros according to the kernel implementation.
Also fix indentation for BITS_PER_TYPE definition.
Link: http://lkml.kernel.org/r/20200102043031.30357-3-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Amritha Nambiar <amritha.nambiar@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: "Tobin C . Harding" <tobin@kernel.org>
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/linux/bitops.h | 4 +++-
tools/include/linux/bitops.h | 9 +++++----
2 files changed, 8 insertions(+), 5 deletions(-)
--- a/include/linux/bitops.h~bitops-more-bits_to_-macros
+++ a/include/linux/bitops.h
@@ -11,8 +11,10 @@
# define aligned_byte_mask(n) (~0xffUL << (BITS_PER_LONG - 8 - 8*(n)))
#endif
-#define BITS_PER_TYPE(type) (sizeof(type) * BITS_PER_BYTE)
+#define BITS_PER_TYPE(type) (sizeof(type) * BITS_PER_BYTE)
#define BITS_TO_LONGS(nr) DIV_ROUND_UP(nr, BITS_PER_TYPE(long))
+#define BITS_TO_U64(nr) DIV_ROUND_UP(nr, BITS_PER_TYPE(u64))
+#define BITS_TO_U32(nr) DIV_ROUND_UP(nr, BITS_PER_TYPE(u32))
#define BITS_TO_BYTES(nr) DIV_ROUND_UP(nr, BITS_PER_TYPE(char))
extern unsigned int __sw_hweight8(unsigned int w);
--- a/tools/include/linux/bitops.h~bitops-more-bits_to_-macros
+++ a/tools/include/linux/bitops.h
@@ -14,10 +14,11 @@
#include <linux/bits.h>
#include <linux/compiler.h>
-#define BITS_TO_LONGS(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
-#define BITS_TO_U64(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u64))
-#define BITS_TO_U32(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u32))
-#define BITS_TO_BYTES(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE)
+#define BITS_PER_TYPE(type) (sizeof(type) * BITS_PER_BYTE)
+#define BITS_TO_LONGS(nr) DIV_ROUND_UP(nr, BITS_PER_TYPE(long))
+#define BITS_TO_U64(nr) DIV_ROUND_UP(nr, BITS_PER_TYPE(u64))
+#define BITS_TO_U32(nr) DIV_ROUND_UP(nr, BITS_PER_TYPE(u32))
+#define BITS_TO_BYTES(nr) DIV_ROUND_UP(nr, BITS_PER_TYPE(char))
extern unsigned int __sw_hweight8(unsigned int w);
extern unsigned int __sw_hweight16(unsigned int w);
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 61/67] lib: add test for bitmap_parse()
2020-02-04 1:33 incoming Andrew Morton
` (59 preceding siblings ...)
2020-02-04 1:37 ` [patch 60/67] bitops: more BITS_TO_* macros Andrew Morton
@ 2020-02-04 1:37 ` Andrew Morton
2020-02-04 1:37 ` [patch 62/67] lib: make bitmap_parse_user a wrapper on bitmap_parse Andrew Morton
` (8 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:37 UTC (permalink / raw)
To: acme, akpm, amritha.nambiar, andriy.shevchenko, chris, keescook,
linux-mm, linux, mm-commits, mszeredi, steffen.klassert, tobin,
torvalds, vineet.gupta1, will.deacon, willemb, willy, yury.norov
From: Yury Norov <yury.norov@gmail.com>
Subject: lib: add test for bitmap_parse()
The test is derived from bitmap_parselist() NO_LEN is reserved for use in
following patches.
[yury.norov@gmail.com: fix rebase issue]
Link: http://lkml.kernel.org/r/20200102182659.6685-1-yury.norov@gmail.com
[andriy.shevchenko@linux.intel.com: fix address space when test user buffer]
Link: http://lkml.kernel.org/r/20200109103601.45929-2-andriy.shevchenko@linux.intel.com
Link: http://lkml.kernel.org/r/20200102043031.30357-4-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Amritha Nambiar <amritha.nambiar@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: "Tobin C . Harding" <tobin@kernel.org>
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
lib/test_bitmap.c | 97 +++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 95 insertions(+), 2 deletions(-)
--- a/lib/test_bitmap.c~lib-add-test-for-bitmap_parse
+++ a/lib/test_bitmap.c
@@ -295,7 +295,8 @@ static void __init test_replace(void)
expect_eq_bitmap(bmap, exp3_1_0, nbits);
}
-#define PARSE_TIME 0x1
+#define PARSE_TIME 0x1
+#define NO_LEN 0x2
struct test_bitmap_parselist{
const int errno;
@@ -349,7 +350,6 @@ static const struct test_bitmap_parselis
{-EINVAL, "0-31:a/1", NULL, 8, 0},
{-EINVAL, "0-\n", NULL, 8, 0},
-#undef step
};
static void __init __test_bitmap_parselist(int is_user)
@@ -401,6 +401,87 @@ static void __init __test_bitmap_parseli
}
}
+static const unsigned long parse_test[] __initconst = {
+ BITMAP_FROM_U64(0),
+ BITMAP_FROM_U64(1),
+ BITMAP_FROM_U64(0xdeadbeef),
+ BITMAP_FROM_U64(0x100000000ULL),
+};
+
+static const unsigned long parse_test2[] __initconst = {
+ BITMAP_FROM_U64(0x100000000ULL), BITMAP_FROM_U64(0xdeadbeef),
+ BITMAP_FROM_U64(0x100000000ULL), BITMAP_FROM_U64(0xbaadf00ddeadbeef),
+ BITMAP_FROM_U64(0x100000000ULL), BITMAP_FROM_U64(0x0badf00ddeadbeef),
+};
+
+static const struct test_bitmap_parselist parse_tests[] __initconst = {
+ {0, "0", &parse_test[0 * step], 32, 0},
+ {0, "1", &parse_test[1 * step], 32, 0},
+ {0, "deadbeef", &parse_test[2 * step], 32, 0},
+ {0, "1,0", &parse_test[3 * step], 33, 0},
+
+ {0, "deadbeef,1,0", &parse_test2[0 * 2 * step], 96, 0},
+ {0, "baadf00d,deadbeef,1,0", &parse_test2[1 * 2 * step], 128, 0},
+ {0, "badf00d,deadbeef,1,0", &parse_test2[2 * 2 * step], 124, 0},
+
+ {-EINVAL, "goodfood,deadbeef,1,0", NULL, 128, 0},
+ {-EOVERFLOW, "3,0", NULL, 33, 0},
+ {-EOVERFLOW, "123badf00d,deadbeef,1,0", NULL, 128, 0},
+ {-EOVERFLOW, "badf00d,deadbeef,1,0", NULL, 90, 0},
+ {-EOVERFLOW, "fbadf00d,deadbeef,1,0", NULL, 95, 0},
+ {-EOVERFLOW, "badf00d,deadbeef,1,0", NULL, 100, 0},
+#undef step
+};
+
+static void __init __test_bitmap_parse(int is_user)
+{
+ int i;
+ int err;
+ ktime_t time;
+ DECLARE_BITMAP(bmap, 2048);
+ char *mode = is_user ? "_user" : "";
+
+ for (i = 0; i < ARRAY_SIZE(parse_tests); i++) {
+ struct test_bitmap_parselist test = parse_tests[i];
+
+ if (is_user) {
+ size_t len = strlen(test.in);
+ mm_segment_t orig_fs = get_fs();
+
+ set_fs(KERNEL_DS);
+ time = ktime_get();
+ err = bitmap_parse_user((__force const char __user *)test.in, len,
+ bmap, test.nbits);
+ time = ktime_get() - time;
+ set_fs(orig_fs);
+ } else {
+ size_t len = test.flags & NO_LEN ?
+ UINT_MAX : strlen(test.in);
+ time = ktime_get();
+ err = bitmap_parse(test.in, len, bmap, test.nbits);
+ time = ktime_get() - time;
+ }
+
+ if (err != test.errno) {
+ pr_err("parse%s: %d: input is %s, errno is %d, expected %d\n",
+ mode, i, test.in, err, test.errno);
+ continue;
+ }
+
+ if (!err && test.expected
+ && !__bitmap_equal(bmap, test.expected, test.nbits)) {
+ pr_err("parse%s: %d: input is %s, result is 0x%lx, expected 0x%lx\n",
+ mode, i, test.in, bmap[0],
+ *test.expected);
+ continue;
+ }
+
+ if (test.flags & PARSE_TIME)
+ pr_err("parse%s: %d: input is '%s' OK, Time: %llu\n",
+ mode, i, test.in, time);
+ }
+}
+
static void __init test_bitmap_parselist(void)
{
__test_bitmap_parselist(0);
@@ -411,6 +492,16 @@ static void __init test_bitmap_parselist
__test_bitmap_parselist(1);
}
+static void __init test_bitmap_parse(void)
+{
+ __test_bitmap_parse(0);
+}
+
+static void __init test_bitmap_parse_user(void)
+{
+ __test_bitmap_parse(1);
+}
+
#define EXP1_IN_BITS (sizeof(exp1) * 8)
static void __init test_bitmap_arr32(void)
@@ -516,6 +607,8 @@ static void __init selftest(void)
test_copy();
test_replace();
test_bitmap_arr32();
+ test_bitmap_parse();
+ test_bitmap_parse_user();
test_bitmap_parselist();
test_bitmap_parselist_user();
test_mem_optimisations();
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 62/67] lib: make bitmap_parse_user a wrapper on bitmap_parse
2020-02-04 1:33 incoming Andrew Morton
` (60 preceding siblings ...)
2020-02-04 1:37 ` [patch 61/67] lib: add test for bitmap_parse() Andrew Morton
@ 2020-02-04 1:37 ` Andrew Morton
2020-02-04 1:37 ` [patch 63/67] lib: rework bitmap_parse() Andrew Morton
` (7 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:37 UTC (permalink / raw)
To: acme, akpm, amritha.nambiar, andriy.shevchenko, chris, keescook,
linux-mm, linux, mm-commits, mszeredi, steffen.klassert, tobin,
torvalds, vineet.gupta1, will.deacon, willemb, willy, yury.norov
From: Yury Norov <yury.norov@gmail.com>
Subject: lib: make bitmap_parse_user a wrapper on bitmap_parse
Currently we parse user data byte after byte which leads to
overcomplicating of parsing algorithm. There are no performance critical
users of bitmap_parse_user(), and so we can duplicate user data to kernel
buffer and simply call bitmap_parselist(). This rework lets us unify and
simplify bitmap_parse() and bitmap_parse_user(), which is done in the
following patch.
Link: http://lkml.kernel.org/r/20200102043031.30357-5-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Amritha Nambiar <amritha.nambiar@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: "Tobin C . Harding" <tobin@kernel.org>
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
lib/bitmap.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
--- a/lib/bitmap.c~lib-make-bitmap_parse_user-a-wrapper-on-bitmap_parse
+++ a/lib/bitmap.c
@@ -530,22 +530,22 @@ EXPORT_SYMBOL(__bitmap_parse);
* then it must be terminated with a \0.
* @maskp: pointer to bitmap array that will contain result.
* @nmaskbits: size of bitmap, in bits.
- *
- * Wrapper for __bitmap_parse(), providing it with user buffer.
- *
- * We cannot have this as an inline function in bitmap.h because it needs
- * linux/uaccess.h to get the access_ok() declaration and this causes
- * cyclic dependencies.
*/
int bitmap_parse_user(const char __user *ubuf,
unsigned int ulen, unsigned long *maskp,
int nmaskbits)
{
- if (!access_ok(ubuf, ulen))
- return -EFAULT;
- return __bitmap_parse((const char __force *)ubuf,
- ulen, 1, maskp, nmaskbits);
+ char *buf;
+ int ret;
+ buf = memdup_user_nul(ubuf, ulen);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
+ ret = bitmap_parse(buf, ulen, maskp, nmaskbits);
+
+ kfree(buf);
+ return ret;
}
EXPORT_SYMBOL(bitmap_parse_user);
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 63/67] lib: rework bitmap_parse()
2020-02-04 1:33 incoming Andrew Morton
` (61 preceding siblings ...)
2020-02-04 1:37 ` [patch 62/67] lib: make bitmap_parse_user a wrapper on bitmap_parse Andrew Morton
@ 2020-02-04 1:37 ` Andrew Morton
2020-02-04 1:37 ` [patch 64/67] lib: new testcases for bitmap_parse{_user} Andrew Morton
` (6 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:37 UTC (permalink / raw)
To: acme, akpm, amritha.nambiar, andriy.shevchenko, chris, keescook,
linux-mm, linux, mm-commits, mszeredi, steffen.klassert, tobin,
torvalds, vineet.gupta1, will.deacon, willemb, willy, yury.norov
From: Yury Norov <yury.norov@gmail.com>
Subject: lib: rework bitmap_parse()
bitmap_parse() is ineffective and full of opaque variables and opencoded
parts. It leads to hard understanding and usage of it. This rework
includes:
- remove bitmap_shift_left() call from the cycle. Now it makes the
complexity of the algorithm as O(nbits^2). In the suggested approach
the input string is parsed in reverse direction, so no shifts needed;
- relax requirement on a single comma and no white spaces between
chunks. It is considered useful in scripting, and it aligns with
bitmap_parselist();
- split bitmap_parse() to small readable helpers;
- make an explicit calculation of the end of input line at the
beginning, so users of the bitmap_parse() won't bother doing this.
Link: http://lkml.kernel.org/r/20200102043031.30357-6-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cc: Amritha Nambiar <amritha.nambiar@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: "Tobin C . Harding" <tobin@kernel.org>
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/linux/bitmap.h | 8 -
lib/bitmap.c | 175 ++++++++++++++++++---------------------
2 files changed, 84 insertions(+), 99 deletions(-)
--- a/include/linux/bitmap.h~lib-rework-bitmap_parse
+++ a/include/linux/bitmap.h
@@ -186,7 +186,7 @@ bitmap_find_next_zero_area(unsigned long
align_mask, 0);
}
-extern int __bitmap_parse(const char *buf, unsigned int buflen, int is_user,
+extern int bitmap_parse(const char *buf, unsigned int buflen,
unsigned long *dst, int nbits);
extern int bitmap_parse_user(const char __user *ubuf, unsigned int ulen,
unsigned long *dst, int nbits);
@@ -454,12 +454,6 @@ static inline void bitmap_replace(unsign
__bitmap_replace(dst, old, new, mask, nbits);
}
-static inline int bitmap_parse(const char *buf, unsigned int buflen,
- unsigned long *maskp, int nmaskbits)
-{
- return __bitmap_parse(buf, buflen, 0, maskp, nmaskbits);
-}
-
static inline void bitmap_next_clear_region(unsigned long *bitmap,
unsigned int *rs, unsigned int *re,
unsigned int end)
--- a/lib/bitmap.c~lib-rework-bitmap_parse
+++ a/lib/bitmap.c
@@ -431,97 +431,6 @@ EXPORT_SYMBOL(bitmap_find_next_zero_area
* second version by Paul Jackson, third by Joe Korty.
*/
-#define CHUNKSZ 32
-#define nbits_to_hold_value(val) fls(val)
-#define BASEDEC 10 /* fancier cpuset lists input in decimal */
-
-/**
- * __bitmap_parse - convert an ASCII hex string into a bitmap.
- * @buf: pointer to buffer containing string.
- * @buflen: buffer size in bytes. If string is smaller than this
- * then it must be terminated with a \0.
- * @is_user: location of buffer, 0 indicates kernel space
- * @maskp: pointer to bitmap array that will contain result.
- * @nmaskbits: size of bitmap, in bits.
- *
- * Commas group hex digits into chunks. Each chunk defines exactly 32
- * bits of the resultant bitmask. No chunk may specify a value larger
- * than 32 bits (%-EOVERFLOW), and if a chunk specifies a smaller value
- * then leading 0-bits are prepended. %-EINVAL is returned for illegal
- * characters and for grouping errors such as "1,,5", ",44", "," and "".
- * Leading and trailing whitespace accepted, but not embedded whitespace.
- */
-int __bitmap_parse(const char *buf, unsigned int buflen,
- int is_user, unsigned long *maskp,
- int nmaskbits)
-{
- int c, old_c, totaldigits, ndigits, nchunks, nbits;
- u32 chunk;
- const char __user __force *ubuf = (const char __user __force *)buf;
-
- bitmap_zero(maskp, nmaskbits);
-
- nchunks = nbits = totaldigits = c = 0;
- do {
- chunk = 0;
- ndigits = totaldigits;
-
- /* Get the next chunk of the bitmap */
- while (buflen) {
- old_c = c;
- if (is_user) {
- if (__get_user(c, ubuf++))
- return -EFAULT;
- }
- else
- c = *buf++;
- buflen--;
- if (isspace(c))
- continue;
-
- /*
- * If the last character was a space and the current
- * character isn't '\0', we've got embedded whitespace.
- * This is a no-no, so throw an error.
- */
- if (totaldigits && c && isspace(old_c))
- return -EINVAL;
-
- /* A '\0' or a ',' signal the end of the chunk */
- if (c == '\0' || c == ',')
- break;
-
- if (!isxdigit(c))
- return -EINVAL;
-
- /*
- * Make sure there are at least 4 free bits in 'chunk'.
- * If not, this hexdigit will overflow 'chunk', so
- * throw an error.
- */
- if (chunk & ~((1UL << (CHUNKSZ - 4)) - 1))
- return -EOVERFLOW;
-
- chunk = (chunk << 4) | hex_to_bin(c);
- totaldigits++;
- }
- if (ndigits == totaldigits)
- return -EINVAL;
- if (nchunks == 0 && chunk == 0)
- continue;
-
- __bitmap_shift_left(maskp, maskp, CHUNKSZ, nmaskbits);
- *maskp |= chunk;
- nchunks++;
- nbits += (nchunks == 1) ? nbits_to_hold_value(chunk) : CHUNKSZ;
- if (nbits > nmaskbits)
- return -EOVERFLOW;
- } while (buflen && c == ',');
-
- return 0;
-}
-EXPORT_SYMBOL(__bitmap_parse);
-
/**
* bitmap_parse_user - convert an ASCII hex string in a user buffer into a bitmap
*
@@ -542,7 +451,7 @@ int bitmap_parse_user(const char __user
if (IS_ERR(buf))
return PTR_ERR(buf);
- ret = bitmap_parse(buf, ulen, maskp, nmaskbits);
+ ret = bitmap_parse(buf, UINT_MAX, maskp, nmaskbits);
kfree(buf);
return ret;
@@ -653,6 +562,14 @@ static const char *bitmap_find_region(co
return end_of_str(*str) ? NULL : str;
}
+static const char *bitmap_find_region_reverse(const char *start, const char *end)
+{
+ while (start <= end && __end_of_region(*end))
+ end--;
+
+ return end;
+}
+
static const char *bitmap_parse_region(const char *str, struct region *r)
{
str = bitmap_getnum(str, &r->start);
@@ -776,6 +693,80 @@ int bitmap_parselist_user(const char __u
}
EXPORT_SYMBOL(bitmap_parselist_user);
+static const char *bitmap_get_x32_reverse(const char *start,
+ const char *end, u32 *num)
+{
+ u32 ret = 0;
+ int c, i;
+
+ for (i = 0; i < 32; i += 4) {
+ c = hex_to_bin(*end--);
+ if (c < 0)
+ return ERR_PTR(-EINVAL);
+
+ ret |= c << i;
+
+ if (start > end || __end_of_region(*end))
+ goto out;
+ }
+
+ if (hex_to_bin(*end--) >= 0)
+ return ERR_PTR(-EOVERFLOW);
+out:
+ *num = ret;
+ return end;
+}
+
+/**
+ * bitmap_parse - convert an ASCII hex string into a bitmap.
+ * @start: pointer to buffer containing string.
+ * @buflen: buffer size in bytes. If string is smaller than this
+ * then it must be terminated with a \0 or \n. In that case,
+ * UINT_MAX may be provided instead of string length.
+ * @maskp: pointer to bitmap array that will contain result.
+ * @nmaskbits: size of bitmap, in bits.
+ *
+ * Commas group hex digits into chunks. Each chunk defines exactly 32
+ * bits of the resultant bitmask. No chunk may specify a value larger
+ * than 32 bits (%-EOVERFLOW), and if a chunk specifies a smaller value
+ * then leading 0-bits are prepended. %-EINVAL is returned for illegal
+ * characters. Grouping such as "1,,5", ",44", "," or "" is allowed.
+ * Leading, embedded and trailing whitespace accepted.
+ */
+int bitmap_parse(const char *start, unsigned int buflen,
+ unsigned long *maskp, int nmaskbits)
+{
+ const char *end = strnchrnul(start, buflen, '\n') - 1;
+ int chunks = BITS_TO_U32(nmaskbits);
+ u32 *bitmap = (u32 *)maskp;
+ int unset_bit;
+
+ while (1) {
+ end = bitmap_find_region_reverse(start, end);
+ if (start > end)
+ break;
+
+ if (!chunks--)
+ return -EOVERFLOW;
+
+ end = bitmap_get_x32_reverse(start, end, bitmap++);
+ if (IS_ERR(end))
+ return PTR_ERR(end);
+ }
+
+ unset_bit = (BITS_TO_U32(nmaskbits) - chunks) * 32;
+ if (unset_bit < nmaskbits) {
+ bitmap_clear(maskp, unset_bit, nmaskbits - unset_bit);
+ return 0;
+ }
+
+ if (find_next_bit(maskp, unset_bit, nmaskbits) != unset_bit)
+ return -EOVERFLOW;
+
+ return 0;
+}
+EXPORT_SYMBOL(bitmap_parse);
+
#ifdef CONFIG_NUMA
/**
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 64/67] lib: new testcases for bitmap_parse{_user}
2020-02-04 1:33 incoming Andrew Morton
` (62 preceding siblings ...)
2020-02-04 1:37 ` [patch 63/67] lib: rework bitmap_parse() Andrew Morton
@ 2020-02-04 1:37 ` Andrew Morton
2020-02-04 1:37 ` [patch 65/67] include/linux/cpumask.h: don't calculate length of the input string Andrew Morton
` (5 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:37 UTC (permalink / raw)
To: acme, akpm, amritha.nambiar, andriy.shevchenko, chris, keescook,
linux-mm, linux, mm-commits, mszeredi, steffen.klassert, tobin,
torvalds, vineet.gupta1, will.deacon, willemb, willy, yury.norov
From: Yury Norov <yury.norov@gmail.com>
Subject: lib: new testcases for bitmap_parse{_user}
New version of bitmap_parse() is unified with bitmap_parse_list(),
and therefore:
- weakens rules on whitespaces and commas between hex chunks;
- in addition to
- allows passing UINT_MAX or any other big number as the length of input
string instead of actual string length.
The patch covers the cases.
Link: http://lkml.kernel.org/r/20200102043031.30357-7-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Amritha Nambiar <amritha.nambiar@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: "Tobin C . Harding" <tobin@kernel.org>
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
lib/test_bitmap.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/lib/test_bitmap.c~lib-new-testcases-for-bitmap_parse_user
+++ a/lib/test_bitmap.c
@@ -415,14 +415,22 @@ static const unsigned long parse_test2[]
};
static const struct test_bitmap_parselist parse_tests[] __initconst = {
+ {0, "", &parse_test[0 * step], 32, 0},
+ {0, " ", &parse_test[0 * step], 32, 0},
{0, "0", &parse_test[0 * step], 32, 0},
+ {0, "0\n", &parse_test[0 * step], 32, 0},
{0, "1", &parse_test[1 * step], 32, 0},
{0, "deadbeef", &parse_test[2 * step], 32, 0},
{0, "1,0", &parse_test[3 * step], 33, 0},
+ {0, "deadbeef,\n,0,1", &parse_test[2 * step], 96, 0},
{0, "deadbeef,1,0", &parse_test2[0 * 2 * step], 96, 0},
{0, "baadf00d,deadbeef,1,0", &parse_test2[1 * 2 * step], 128, 0},
{0, "badf00d,deadbeef,1,0", &parse_test2[2 * 2 * step], 124, 0},
+ {0, "badf00d,deadbeef,1,0", &parse_test2[2 * 2 * step], 124, NO_LEN},
+ {0, " badf00d,deadbeef,1,0 ", &parse_test2[2 * 2 * step], 124, 0},
+ {0, " , badf00d,deadbeef,1,0 , ", &parse_test2[2 * 2 * step], 124, 0},
+ {0, " , badf00d, ,, ,,deadbeef,1,0 , ", &parse_test2[2 * 2 * step], 124, 0},
{-EINVAL, "goodfood,deadbeef,1,0", NULL, 128, 0},
{-EOVERFLOW, "3,0", NULL, 33, 0},
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 65/67] include/linux/cpumask.h: don't calculate length of the input string
2020-02-04 1:33 incoming Andrew Morton
` (63 preceding siblings ...)
2020-02-04 1:37 ` [patch 64/67] lib: new testcases for bitmap_parse{_user} Andrew Morton
@ 2020-02-04 1:37 ` Andrew Morton
2020-02-04 1:37 ` [patch 66/67] treewide: remove redundant IS_ERR() before error code check Andrew Morton
` (4 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:37 UTC (permalink / raw)
To: acme, akpm, amritha.nambiar, andriy.shevchenko, chris, keescook,
linux-mm, linux, mm-commits, mszeredi, steffen.klassert, tobin,
torvalds, vineet.gupta1, will.deacon, willemb, willy, yury.norov
From: Yury Norov <yury.norov@gmail.com>
Subject: include/linux/cpumask.h: don't calculate length of the input string
New design of inner bitmap_parse() allows to avoid calculating the size of
a null-terminated string.
Link: http://lkml.kernel.org/r/20200102043031.30357-8-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Amritha Nambiar <amritha.nambiar@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: "Tobin C . Harding" <tobin@kernel.org>
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/linux/cpumask.h | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/include/linux/cpumask.h~cpumask-dont-calculate-length-of-the-input-string
+++ a/include/linux/cpumask.h
@@ -663,9 +663,7 @@ static inline int cpumask_parselist_user
*/
static inline int cpumask_parse(const char *buf, struct cpumask *dstp)
{
- unsigned int len = strchrnul(buf, '\n') - buf;
-
- return bitmap_parse(buf, len, cpumask_bits(dstp), nr_cpumask_bits);
+ return bitmap_parse(buf, UINT_MAX, cpumask_bits(dstp), nr_cpumask_bits);
}
/**
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 66/67] treewide: remove redundant IS_ERR() before error code check
2020-02-04 1:33 incoming Andrew Morton
` (64 preceding siblings ...)
2020-02-04 1:37 ` [patch 65/67] include/linux/cpumask.h: don't calculate length of the input string Andrew Morton
@ 2020-02-04 1:37 ` Andrew Morton
2020-02-04 1:37 ` [patch 67/67] ARM: dma-api: fix max_pfn off-by-one error in __dma_supported() Andrew Morton
` (3 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:37 UTC (permalink / raw)
To: akpm, bgolaszewski, ebiggers, julia.lawall, linux-mm, masahiroy,
mm-commits, rafael.j.wysocki, robh, sboyd, torvalds, wsa
From: Masahiro Yamada <masahiroy@kernel.org>
Subject: treewide: remove redundant IS_ERR() before error code check
'PTR_ERR(p) == -E*' is a stronger condition than IS_ERR(p).
Hence, IS_ERR(p) is unneeded.
The semantic patch that generates this commit is as follows:
// <smpl>
@@
expression ptr;
constant error_code;
@@
-IS_ERR(ptr) && (PTR_ERR(ptr) == - error_code)
+PTR_ERR(ptr) == - error_code
// </smpl>
Link: http://lkml.kernel.org/r/20200106045833.1725-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: Stephen Boyd <sboyd@kernel.org> [drivers/clk/clk.c]
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [GPIO]
Acked-by: Wolfram Sang <wsa@the-dreams.de> [drivers/i2c]
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [acpi/scan.c]
Acked-by: Rob Herring <robh@kernel.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
crypto/af_alg.c | 2 +-
drivers/acpi/scan.c | 2 +-
drivers/char/hw_random/bcm2835-rng.c | 2 +-
drivers/char/hw_random/omap-rng.c | 4 ++--
drivers/clk/clk.c | 2 +-
drivers/dma/mv_xor_v2.c | 2 +-
drivers/gpio/gpiolib-devres.c | 2 +-
drivers/gpio/gpiolib-of.c | 8 ++++----
drivers/gpio/gpiolib.c | 2 +-
drivers/i2c/busses/i2c-mv64xxx.c | 5 ++---
drivers/i2c/busses/i2c-synquacer.c | 2 +-
drivers/mtd/ubi/build.c | 2 +-
drivers/of/device.c | 2 +-
drivers/pci/controller/pci-tegra.c | 2 +-
drivers/phy/phy-core.c | 4 ++--
drivers/spi/spi-orion.c | 3 +--
drivers/video/fbdev/imxfb.c | 2 +-
fs/ext4/super.c | 2 +-
fs/f2fs/node.c | 2 +-
fs/ocfs2/suballoc.c | 2 +-
fs/sysfs/group.c | 2 +-
net/core/dev.c | 2 +-
net/core/filter.c | 2 +-
net/xfrm/xfrm_policy.c | 2 +-
sound/soc/codecs/ak4104.c | 3 +--
sound/soc/codecs/cs4270.c | 3 +--
sound/soc/codecs/tlv320aic32x4.c | 6 ++----
sound/soc/sunxi/sun4i-spdif.c | 2 +-
28 files changed, 35 insertions(+), 41 deletions(-)
--- a/crypto/af_alg.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/crypto/af_alg.c
@@ -171,7 +171,7 @@ static int alg_bind(struct socket *sock,
sa->salg_name[sizeof(sa->salg_name) + addr_len - sizeof(*sa) - 1] = 0;
type = alg_get_type(sa->salg_type);
- if (IS_ERR(type) && PTR_ERR(type) == -ENOENT) {
+ if (PTR_ERR(type) == -ENOENT) {
request_module("algif-%s", sa->salg_type);
type = alg_get_type(sa->salg_type);
}
--- a/drivers/acpi/scan.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/drivers/acpi/scan.c
@@ -1462,7 +1462,7 @@ int acpi_dma_configure(struct device *de
iort_dma_setup(dev, &dma_addr, &size);
iommu = iort_iommu_configure(dev);
- if (IS_ERR(iommu) && PTR_ERR(iommu) == -EPROBE_DEFER)
+ if (PTR_ERR(iommu) == -EPROBE_DEFER)
return -EPROBE_DEFER;
arch_setup_dma_ops(dev, dma_addr, size,
--- a/drivers/char/hw_random/bcm2835-rng.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/drivers/char/hw_random/bcm2835-rng.c
@@ -157,7 +157,7 @@ static int bcm2835_rng_probe(struct plat
/* Clock is optional on most platforms */
priv->clk = devm_clk_get(dev, NULL);
- if (IS_ERR(priv->clk) && PTR_ERR(priv->clk) == -EPROBE_DEFER)
+ if (PTR_ERR(priv->clk) == -EPROBE_DEFER)
return -EPROBE_DEFER;
priv->rng.name = pdev->name;
--- a/drivers/char/hw_random/omap-rng.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/drivers/char/hw_random/omap-rng.c
@@ -476,7 +476,7 @@ static int omap_rng_probe(struct platfor
}
priv->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(priv->clk) && PTR_ERR(priv->clk) == -EPROBE_DEFER)
+ if (PTR_ERR(priv->clk) == -EPROBE_DEFER)
return -EPROBE_DEFER;
if (!IS_ERR(priv->clk)) {
ret = clk_prepare_enable(priv->clk);
@@ -488,7 +488,7 @@ static int omap_rng_probe(struct platfor
}
priv->clk_reg = devm_clk_get(&pdev->dev, "reg");
- if (IS_ERR(priv->clk_reg) && PTR_ERR(priv->clk_reg) == -EPROBE_DEFER)
+ if (PTR_ERR(priv->clk_reg) == -EPROBE_DEFER)
return -EPROBE_DEFER;
if (!IS_ERR(priv->clk_reg)) {
ret = clk_prepare_enable(priv->clk_reg);
--- a/drivers/clk/clk.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/drivers/clk/clk.c
@@ -429,7 +429,7 @@ static void clk_core_fill_parent_index(s
parent = ERR_PTR(-EPROBE_DEFER);
} else {
parent = clk_core_get(core, index);
- if (IS_ERR(parent) && PTR_ERR(parent) == -ENOENT && entry->name)
+ if (PTR_ERR(parent) == -ENOENT && entry->name)
parent = clk_core_lookup(entry->name);
}
--- a/drivers/dma/mv_xor_v2.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/drivers/dma/mv_xor_v2.c
@@ -750,7 +750,7 @@ static int mv_xor_v2_probe(struct platfo
}
xor_dev->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(xor_dev->clk) && PTR_ERR(xor_dev->clk) == -EPROBE_DEFER) {
+ if (PTR_ERR(xor_dev->clk) == -EPROBE_DEFER) {
ret = EPROBE_DEFER;
goto disable_reg_clk;
}
--- a/drivers/gpio/gpiolib.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/drivers/gpio/gpiolib.c
@@ -5039,7 +5039,7 @@ struct gpio_descs *__must_check gpiod_ge
struct gpio_descs *descs;
descs = gpiod_get_array(dev, con_id, flags);
- if (IS_ERR(descs) && (PTR_ERR(descs) == -ENOENT))
+ if (PTR_ERR(descs) == -ENOENT)
return NULL;
return descs;
--- a/drivers/gpio/gpiolib-devres.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/drivers/gpio/gpiolib-devres.c
@@ -308,7 +308,7 @@ devm_gpiod_get_array_optional(struct dev
struct gpio_descs *descs;
descs = devm_gpiod_get_array(dev, con_id, flags);
- if (IS_ERR(descs) && (PTR_ERR(descs) == -ENOENT))
+ if (PTR_ERR(descs) == -ENOENT)
return NULL;
return descs;
--- a/drivers/gpio/gpiolib-of.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/drivers/gpio/gpiolib-of.c
@@ -484,24 +484,24 @@ struct gpio_desc *of_find_gpio(struct de
break;
}
- if (IS_ERR(desc) && PTR_ERR(desc) == -ENOENT) {
+ if (PTR_ERR(desc) == -ENOENT) {
/* Special handling for SPI GPIOs if used */
desc = of_find_spi_gpio(dev, con_id, &of_flags);
}
- if (IS_ERR(desc) && PTR_ERR(desc) == -ENOENT) {
+ if (PTR_ERR(desc) == -ENOENT) {
/* This quirk looks up flags and all */
desc = of_find_spi_cs_gpio(dev, con_id, idx, flags);
if (!IS_ERR(desc))
return desc;
}
- if (IS_ERR(desc) && PTR_ERR(desc) == -ENOENT) {
+ if (PTR_ERR(desc) == -ENOENT) {
/* Special handling for regulator GPIOs if used */
desc = of_find_regulator_gpio(dev, con_id, &of_flags);
}
- if (IS_ERR(desc) && PTR_ERR(desc) == -ENOENT)
+ if (PTR_ERR(desc) == -ENOENT)
desc = of_find_arizona_gpio(dev, con_id, &of_flags);
if (IS_ERR(desc))
--- a/drivers/i2c/busses/i2c-mv64xxx.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/drivers/i2c/busses/i2c-mv64xxx.c
@@ -901,14 +901,13 @@ mv64xxx_i2c_probe(struct platform_device
/* Not all platforms have clocks */
drv_data->clk = devm_clk_get(&pd->dev, NULL);
- if (IS_ERR(drv_data->clk) && PTR_ERR(drv_data->clk) == -EPROBE_DEFER)
+ if (PTR_ERR(drv_data->clk) == -EPROBE_DEFER)
return -EPROBE_DEFER;
if (!IS_ERR(drv_data->clk))
clk_prepare_enable(drv_data->clk);
drv_data->reg_clk = devm_clk_get(&pd->dev, "reg");
- if (IS_ERR(drv_data->reg_clk) &&
- PTR_ERR(drv_data->reg_clk) == -EPROBE_DEFER)
+ if (PTR_ERR(drv_data->reg_clk) == -EPROBE_DEFER)
return -EPROBE_DEFER;
if (!IS_ERR(drv_data->reg_clk))
clk_prepare_enable(drv_data->reg_clk);
--- a/drivers/i2c/busses/i2c-synquacer.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/drivers/i2c/busses/i2c-synquacer.c
@@ -553,7 +553,7 @@ static int synquacer_i2c_probe(struct pl
&i2c->pclkrate);
i2c->pclk = devm_clk_get(&pdev->dev, "pclk");
- if (IS_ERR(i2c->pclk) && PTR_ERR(i2c->pclk) == -EPROBE_DEFER)
+ if (PTR_ERR(i2c->pclk) == -EPROBE_DEFER)
return -EPROBE_DEFER;
if (!IS_ERR_OR_NULL(i2c->pclk)) {
dev_dbg(&pdev->dev, "clock source %p\n", i2c->pclk);
--- a/drivers/mtd/ubi/build.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/drivers/mtd/ubi/build.c
@@ -1180,7 +1180,7 @@ static struct mtd_info * __init open_mtd
* MTD device name.
*/
mtd = get_mtd_device_nm(mtd_dev);
- if (IS_ERR(mtd) && PTR_ERR(mtd) == -ENODEV)
+ if (PTR_ERR(mtd) == -ENODEV)
/* Probably this is an MTD character device node path */
mtd = open_mtd_by_chdev(mtd_dev);
} else
--- a/drivers/of/device.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/drivers/of/device.c
@@ -161,7 +161,7 @@ int of_dma_configure(struct device *dev,
coherent ? " " : " not ");
iommu = of_iommu_configure(dev, np);
- if (IS_ERR(iommu) && PTR_ERR(iommu) == -EPROBE_DEFER)
+ if (PTR_ERR(iommu) == -EPROBE_DEFER)
return -EPROBE_DEFER;
dev_dbg(dev, "device is%sbehind an iommu\n",
--- a/drivers/pci/controller/pci-tegra.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/drivers/pci/controller/pci-tegra.c
@@ -1406,7 +1406,7 @@ static struct phy *devm_of_phy_optional_
phy = devm_of_phy_get(dev, np, name);
kfree(name);
- if (IS_ERR(phy) && PTR_ERR(phy) == -ENODEV)
+ if (PTR_ERR(phy) == -ENODEV)
phy = NULL;
return phy;
--- a/drivers/phy/phy-core.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/drivers/phy/phy-core.c
@@ -712,7 +712,7 @@ struct phy *phy_optional_get(struct devi
{
struct phy *phy = phy_get(dev, string);
- if (IS_ERR(phy) && (PTR_ERR(phy) == -ENODEV))
+ if (PTR_ERR(phy) == -ENODEV)
phy = NULL;
return phy;
@@ -766,7 +766,7 @@ struct phy *devm_phy_optional_get(struct
{
struct phy *phy = devm_phy_get(dev, string);
- if (IS_ERR(phy) && (PTR_ERR(phy) == -ENODEV))
+ if (PTR_ERR(phy) == -ENODEV)
phy = NULL;
return phy;
--- a/drivers/spi/spi-orion.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/drivers/spi/spi-orion.c
@@ -646,8 +646,7 @@ static int orion_spi_probe(struct platfo
/* The following clock is only used by some SoCs */
spi->axi_clk = devm_clk_get(&pdev->dev, "axi");
- if (IS_ERR(spi->axi_clk) &&
- PTR_ERR(spi->axi_clk) == -EPROBE_DEFER) {
+ if (PTR_ERR(spi->axi_clk) == -EPROBE_DEFER) {
status = -EPROBE_DEFER;
goto out_rel_clk;
}
--- a/drivers/video/fbdev/imxfb.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/drivers/video/fbdev/imxfb.c
@@ -1017,7 +1017,7 @@ static int imxfb_probe(struct platform_d
}
fbi->lcd_pwr = devm_regulator_get(&pdev->dev, "lcd");
- if (IS_ERR(fbi->lcd_pwr) && (PTR_ERR(fbi->lcd_pwr) == -EPROBE_DEFER)) {
+ if (PTR_ERR(fbi->lcd_pwr) == -EPROBE_DEFER) {
ret = -EPROBE_DEFER;
goto failed_lcd;
}
--- a/fs/ext4/super.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/fs/ext4/super.c
@@ -6043,7 +6043,7 @@ static ssize_t ext4_quota_write(struct s
bh = ext4_bread(handle, inode, blk,
EXT4_GET_BLOCKS_CREATE |
EXT4_GET_BLOCKS_METADATA_NOFAIL);
- } while (IS_ERR(bh) && (PTR_ERR(bh) == -ENOSPC) &&
+ } while (PTR_ERR(bh) == -ENOSPC &&
ext4_should_retry_alloc(inode->i_sb, &retries));
if (IS_ERR(bh))
return PTR_ERR(bh);
--- a/fs/f2fs/node.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/fs/f2fs/node.c
@@ -875,7 +875,7 @@ static int truncate_dnode(struct dnode_o
/* get direct node */
page = f2fs_get_node_page(F2FS_I_SB(dn->inode), dn->nid);
- if (IS_ERR(page) && PTR_ERR(page) == -ENOENT)
+ if (PTR_ERR(page) == -ENOENT)
return 1;
else if (IS_ERR(page))
return PTR_ERR(page);
--- a/fs/ocfs2/suballoc.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/fs/ocfs2/suballoc.c
@@ -696,7 +696,7 @@ static int ocfs2_block_group_alloc(struc
bg_bh = ocfs2_block_group_alloc_contig(osb, handle, alloc_inode,
ac, cl);
- if (IS_ERR(bg_bh) && (PTR_ERR(bg_bh) == -ENOSPC))
+ if (PTR_ERR(bg_bh) == -ENOSPC)
bg_bh = ocfs2_block_group_alloc_discontig(handle,
alloc_inode,
ac, cl);
--- a/fs/sysfs/group.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/fs/sysfs/group.c
@@ -449,7 +449,7 @@ int __compat_only_sysfs_link_entry_to_ko
}
link = kernfs_create_link(kobj->sd, target_name, entry);
- if (IS_ERR(link) && PTR_ERR(link) == -EEXIST)
+ if (PTR_ERR(link) == -EEXIST)
sysfs_warn_dup(kobj->sd, target_name);
kernfs_put(entry);
--- a/net/core/dev.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/net/core/dev.c
@@ -5792,7 +5792,7 @@ static enum gro_result dev_gro_receive(s
if (&ptype->list == head)
goto normal;
- if (IS_ERR(pp) && PTR_ERR(pp) == -EINPROGRESS) {
+ if (PTR_ERR(pp) == -EINPROGRESS) {
ret = GRO_CONSUMED;
goto ok;
}
--- a/net/core/filter.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/net/core/filter.c
@@ -1573,7 +1573,7 @@ int sk_reuseport_attach_bpf(u32 ufd, str
return -EPERM;
prog = bpf_prog_get_type(ufd, BPF_PROG_TYPE_SOCKET_FILTER);
- if (IS_ERR(prog) && PTR_ERR(prog) == -EINVAL)
+ if (PTR_ERR(prog) == -EINVAL)
prog = bpf_prog_get_type(ufd, BPF_PROG_TYPE_SK_REUSEPORT);
if (IS_ERR(prog))
return PTR_ERR(prog);
--- a/net/xfrm/xfrm_policy.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/net/xfrm/xfrm_policy.c
@@ -3189,7 +3189,7 @@ struct dst_entry *xfrm_lookup_route(stru
flags | XFRM_LOOKUP_QUEUE |
XFRM_LOOKUP_KEEP_DST_REF);
- if (IS_ERR(dst) && PTR_ERR(dst) == -EREMOTE)
+ if (PTR_ERR(dst) == -EREMOTE)
return make_blackhole(net, dst_orig->ops->family, dst_orig);
if (IS_ERR(dst))
--- a/sound/soc/codecs/ak4104.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/sound/soc/codecs/ak4104.c
@@ -295,8 +295,7 @@ static int ak4104_spi_probe(struct spi_d
reset_gpiod = devm_gpiod_get_optional(&spi->dev, "reset",
GPIOD_OUT_HIGH);
- if (IS_ERR(reset_gpiod) &&
- PTR_ERR(reset_gpiod) == -EPROBE_DEFER)
+ if (PTR_ERR(reset_gpiod) == -EPROBE_DEFER)
return -EPROBE_DEFER;
/* read the 'reserved' register - according to the datasheet, it
--- a/sound/soc/codecs/cs4270.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/sound/soc/codecs/cs4270.c
@@ -681,8 +681,7 @@ static int cs4270_i2c_probe(struct i2c_c
reset_gpiod = devm_gpiod_get_optional(&i2c_client->dev, "reset",
GPIOD_OUT_HIGH);
- if (IS_ERR(reset_gpiod) &&
- PTR_ERR(reset_gpiod) == -EPROBE_DEFER)
+ if (PTR_ERR(reset_gpiod) == -EPROBE_DEFER)
return -EPROBE_DEFER;
cs4270->regmap = devm_regmap_init_i2c(i2c_client, &cs4270_regmap);
--- a/sound/soc/codecs/tlv320aic32x4.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/sound/soc/codecs/tlv320aic32x4.c
@@ -1098,11 +1098,9 @@ static int aic32x4_setup_regulators(stru
return PTR_ERR(aic32x4->supply_av);
}
} else {
- if (IS_ERR(aic32x4->supply_dv) &&
- PTR_ERR(aic32x4->supply_dv) == -EPROBE_DEFER)
+ if (PTR_ERR(aic32x4->supply_dv) == -EPROBE_DEFER)
return -EPROBE_DEFER;
- if (IS_ERR(aic32x4->supply_av) &&
- PTR_ERR(aic32x4->supply_av) == -EPROBE_DEFER)
+ if (PTR_ERR(aic32x4->supply_av) == -EPROBE_DEFER)
return -EPROBE_DEFER;
}
--- a/sound/soc/sunxi/sun4i-spdif.c~treewide-remove-redundent-is_err-before-error-code-check
+++ a/sound/soc/sunxi/sun4i-spdif.c
@@ -555,7 +555,7 @@ static int sun4i_spdif_probe(struct plat
if (quirks->has_reset) {
host->rst = devm_reset_control_get_optional_exclusive(&pdev->dev,
NULL);
- if (IS_ERR(host->rst) && PTR_ERR(host->rst) == -EPROBE_DEFER) {
+ if (PTR_ERR(host->rst) == -EPROBE_DEFER) {
ret = -EPROBE_DEFER;
dev_err(&pdev->dev, "Failed to get reset: %d\n", ret);
return ret;
_
^ permalink raw reply [flat|nested] 95+ messages in thread* [patch 67/67] ARM: dma-api: fix max_pfn off-by-one error in __dma_supported()
2020-02-04 1:33 incoming Andrew Morton
` (65 preceding siblings ...)
2020-02-04 1:37 ` [patch 66/67] treewide: remove redundant IS_ERR() before error code check Andrew Morton
@ 2020-02-04 1:37 ` Andrew Morton
2020-02-04 2:27 ` incoming Linus Torvalds
` (2 subsequent siblings)
69 siblings, 0 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 1:37 UTC (permalink / raw)
To: akpm, hch, linux-mm, linux, mm-commits, robin.murphy, stable,
torvalds, wens
From: Chen-Yu Tsai <wens@csie.org>
Subject: ARM: dma-api: fix max_pfn off-by-one error in __dma_supported()
max_pfn, as set in arch/arm/mm/init.c:
static void __init find_limits(unsigned long *min,
unsigned long *max_low,
unsigned long *max_high)
{
*max_low = PFN_DOWN(memblock_get_current_limit());
*min = PFN_UP(memblock_start_of_DRAM());
*max_high = PFN_DOWN(memblock_end_of_DRAM());
}
with memblock_end_of_DRAM() pointing to the next byte after DRAM. As
such, max_pfn points to the PFN after the end of DRAM.
Thus when using max_pfn to check DMA masks, we should subtract one when
checking DMA ranges against it.
Commit 8bf1268f48ad ("ARM: dma-api: fix off-by-one error in
__dma_supported()") fixed the same issue, but missed this spot.
This issue was found while working on the sun4i-csi v4l2 driver on the
Allwinner R40 SoC. On Allwinner SoCs, DRAM is offset at 0x40000000, and
we are starting to use of_dma_configure() with the "dma-ranges" property
in the device tree to have the DMA API handle the offset.
In this particular instance, dma-ranges was set to the same range as the
actual available (2 GiB) DRAM. The following error appeared when the
driver attempted to allocate a buffer:
sun4i-csi 1c09000.csi: Coherent DMA mask 0x7fffffff (pfn 0x40000-0xc0000)
covers a smaller range of system memory than the DMA zone pfn 0x0-0xc0001
sun4i-csi 1c09000.csi: dma_alloc_coherent of size 307200 failed
Fixing the off-by-one error makes things work.
Link: http://lkml.kernel.org/r/20191224030239.5656-1-wens@kernel.org
Fixes: 11a5aa32562e ("ARM: dma-mapping: check DMA mask against available memory")
Fixes: 9f28cde0bc64 ("ARM: another fix for the DMA mapping checks")
Fixes: ab746573c405 ("ARM: dma-mapping: allow larger DMA mask than supported")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/arm/mm/dma-mapping.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/mm/dma-mapping.c~arm-dma-api-fix-max_pfn-off-by-one-error-in-__dma_supported
+++ a/arch/arm/mm/dma-mapping.c
@@ -221,7 +221,7 @@ EXPORT_SYMBOL(arm_coherent_dma_ops);
static int __dma_supported(struct device *dev, u64 mask, bool warn)
{
- unsigned long max_dma_pfn = min(max_pfn, arm_dma_pfn_limit);
+ unsigned long max_dma_pfn = min(max_pfn - 1, arm_dma_pfn_limit);
/*
* Translate the device's DMA mask to a PFN limit. This
_
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: incoming
2020-02-04 1:33 incoming Andrew Morton
` (66 preceding siblings ...)
2020-02-04 1:37 ` [patch 67/67] ARM: dma-api: fix max_pfn off-by-one error in __dma_supported() Andrew Morton
@ 2020-02-04 2:27 ` Linus Torvalds
2020-02-04 2:46 ` incoming Andrew Morton
2020-02-14 6:26 ` mmotm 2020-02-13-22-26 uploaded Andrew Morton
2020-02-25 3:53 ` mmotm 2020-02-24-19-53 uploaded Andrew Morton
69 siblings, 1 reply; 95+ messages in thread
From: Linus Torvalds @ 2020-02-04 2:27 UTC (permalink / raw)
To: Andrew Morton; +Cc: mm-commits, Linux-MM
On Tue, Feb 4, 2020 at 1:33 AM Andrew Morton <akpm@linux-foundation.org> wrote:
>
> The rest of MM and the rest of everything else.
What's the base? You've changed your scripts or something, and that
information is no longer in your cover letter..
Linus
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: incoming
2020-02-04 2:27 ` incoming Linus Torvalds
@ 2020-02-04 2:46 ` Andrew Morton
2020-02-04 3:11 ` incoming Linus Torvalds
0 siblings, 1 reply; 95+ messages in thread
From: Andrew Morton @ 2020-02-04 2:46 UTC (permalink / raw)
To: Linus Torvalds; +Cc: mm-commits, Linux-MM
On Tue, 4 Feb 2020 02:27:48 +0000 Linus Torvalds <torvalds@linux-foundation.org> wrote:
> On Tue, Feb 4, 2020 at 1:33 AM Andrew Morton <akpm@linux-foundation.org> wrote:
> >
> > The rest of MM and the rest of everything else.
>
> What's the base? You've changed your scripts or something, and that
> information is no longer in your cover letter..
>
Crap, sorry, geriatric.
d4e9056daedca3891414fe3c91de3449a5dad0f2
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: incoming
2020-02-04 2:46 ` incoming Andrew Morton
@ 2020-02-04 3:11 ` Linus Torvalds
0 siblings, 0 replies; 95+ messages in thread
From: Linus Torvalds @ 2020-02-04 3:11 UTC (permalink / raw)
To: Andrew Morton; +Cc: mm-commits, Linux-MM
On Tue, Feb 4, 2020 at 2:46 AM Andrew Morton <akpm@linux-foundation.org> wrote:
>
> On Tue, 4 Feb 2020 02:27:48 +0000 Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> > What's the base? You've changed your scripts or something, and that
> > information is no longer in your cover letter..
>
> Crap, sorry, geriatric.
>
> d4e9056daedca3891414fe3c91de3449a5dad0f2
Ok, I've tentatively applied it with the MIME decoding fixes I found,
and I'll guess I'll let it build and sit for a while before merging it
into my tree.
I didn't find anything else odd in there. But...
Linus
^ permalink raw reply [flat|nested] 95+ messages in thread
* mmotm 2020-02-13-22-26 uploaded
2020-02-04 1:33 incoming Andrew Morton
` (67 preceding siblings ...)
2020-02-04 2:27 ` incoming Linus Torvalds
@ 2020-02-14 6:26 ` Andrew Morton
2020-02-14 16:29 ` mmotm 2020-02-13-22-26 uploaded (mm/hugetlb.c) Randy Dunlap
2020-02-14 16:49 ` mmotm 2020-02-13-22-26 uploaded (mm/migrate.c, hugetlb_cgroup.h) Randy Dunlap
2020-02-25 3:53 ` mmotm 2020-02-24-19-53 uploaded Andrew Morton
69 siblings, 2 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-14 6:26 UTC (permalink / raw)
To: broonie, linux-fsdevel, linux-kernel, linux-mm, linux-next,
mhocko, mm-commits, sfr
The mm-of-the-moment snapshot 2020-02-13-22-26 has been uploaded to
http://www.ozlabs.org/~akpm/mmotm/
mmotm-readme.txt says
README for mm-of-the-moment:
http://www.ozlabs.org/~akpm/mmotm/
This is a snapshot of my -mm patch queue. Uploaded at random hopefully
more than once a week.
You will need quilt to apply these patches to the latest Linus release (5.x
or 5.x-rcY). The series file is in broken-out.tar.gz and is duplicated in
http://ozlabs.org/~akpm/mmotm/series
The file broken-out.tar.gz contains two datestamp files: .DATE and
.DATE-yyyy-mm-dd-hh-mm-ss. Both contain the string yyyy-mm-dd-hh-mm-ss,
followed by the base kernel version against which this patch series is to
be applied.
This tree is partially included in linux-next. To see which patches are
included in linux-next, consult the `series' file. Only the patches
within the #NEXT_PATCHES_START/#NEXT_PATCHES_END markers are included in
linux-next.
A full copy of the full kernel tree with the linux-next and mmotm patches
already applied is available through git within an hour of the mmotm
release. Individual mmotm releases are tagged. The master branch always
points to the latest release, so it's constantly rebasing.
https://github.com/hnaz/linux-mm
The directory http://www.ozlabs.org/~akpm/mmots/ (mm-of-the-second)
contains daily snapshots of the -mm tree. It is updated more frequently
than mmotm, and is untested.
A git copy of this tree is also available at
https://github.com/hnaz/linux-mm
This mmotm tree contains the following patches against 5.6-rc1:
(patches marked "*" will be included in linux-next)
origin.patch
* y2038-remove-ktime-to-from-timespec-timeval-conversion.patch
* y2038-remove-unused-time32-interfaces.patch
* y2038-hide-timeval-timespec-itimerval-itimerspec-types.patch
* revert-ipcsem-remove-uneeded-sem_undo_list-lock-usage-in-exit_sem.patch
* uapi-fix-userspace-breakage-use-__bits_per_long-for-swap.patch
* mm-dont-prepare-anon_vma-if-vma-has-vm_wipeonfork.patch
* revert-mm-rmapc-reuse-mergeable-anon_vma-as-parent-when-fork.patch
* mm-set-vm_next-and-vm_prev-to-null-in-vm_area_dup.patch
* selftests-vm-add-missed-tests-in-run_vmtests.patch
* get_maintainer-remove-uses-of-p-for-maintainer-name.patch
* scripts-get_maintainerpl-deprioritize-old-fixes-addresses.patch
* mm-fix-a-comment-in-sys_swapon.patch
* memcg-lost-css_put-in-memcg_expand_shrinker_maps.patch
* lib-string-update-match_string-doc-strings-with-correct-behavior.patch
* mm-vmscan-dont-round-up-scan-size-for-online-memory-cgroup.patch
* proc-kpageflags-prevent-an-integer-overflow-in-stable_page_flags.patch
* proc-kpageflags-do-not-use-uninitialized-struct-pages.patch
* x86-mm-split-vmalloc_sync_all.patch
* asm-generic-make-more-kernel-space-headers-mandatory.patch
* ramfs-support-o_tmpfile.patch
* kernel-watchdog-flush-all-printk-nmi-buffers-when-hardlockup-detected.patch
mm.patch
* mm-dont-bother-dropping-mmap_sem-for-zero-size-readahead.patch
* mm-gup-split-get_user_pages_remote-into-two-routines.patch
* mm-gup-pass-a-flags-arg-to-__gup_device_-functions.patch
* mm-introduce-page_ref_sub_return.patch
* mm-gup-pass-gup-flags-to-two-more-routines.patch
* mm-gup-require-foll_get-for-get_user_pages_fast.patch
* mm-gup-track-foll_pin-pages.patch
* mm-gup-page-hpage_pinned_refcount-exact-pin-counts-for-huge-pages.patch
* mm-gup-proc-vmstat-pin_user_pages-foll_pin-reporting.patch
* mm-gup_benchmark-support-pin_user_pages-and-related-calls.patch
* selftests-vm-run_vmtests-invoke-gup_benchmark-with-basic-foll_pin-coverage.patch
* mm-improve-dump_page-for-compound-pages.patch
* mm-dump_page-additional-diagnostics-for-huge-pinned-pages.patch
* mm-swap-move-inode_lock-out-of-claim_swapfile.patch
* mm-swapfilec-fix-comments-for-swapcache_prepare.patch
* mm-memcg-fix-build-error-around-the-usage-of-kmem_caches.patch
* mm-allocate-shrinker_map-on-appropriate-numa-node.patch
* mm-mapping_dirty_helpers-update-huge-page-table-entry-callbacks.patch
* mm-refactor-insert_page-to-prepare-for-batched-lock-insert.patch
* mm-add-vm_insert_pages.patch
* mm-add-vm_insert_pages-fix.patch
* mm-add-vm_insert_pages-2.patch
* net-zerocopy-use-vm_insert_pages-for-tcp-rcv-zerocopy.patch
* net-zerocopy-use-vm_insert_pages-for-tcp-rcv-zerocopy-fix.patch
* mm-mmap-fix-the-adjusted-length-error.patch
* mm-add-mremap_dontunmap-to-mremap.patch
* mm-sparsemem-get-address-to-page-struct-instead-of-address-to-pfn.patch
* mm-vmpressure-dont-need-call-kfree-if-kstrndup-fails.patch
* mm-vmpressure-use-mem_cgroup_is_root-api.patch
* mm-vmscan-replace-open-codings-to-numa_no_node.patch
* mm-mempolicy-support-mpol_mf_strict-for-huge-page-mapping.patch
* mm-mempolicy-use-vm_bug_on_vma-in-queue_pages_test_walk.patch
* hugetlb_cgroup-add-hugetlb_cgroup-reservation-counter.patch
* hugetlb_cgroup-add-interface-for-charge-uncharge-hugetlb-reservations.patch
* hugetlb_cgroup-add-reservation-accounting-for-private-mappings.patch
* hugetlb-disable-region_add-file_region-coalescing.patch
* hugetlb_cgroup-add-accounting-for-shared-mappings.patch
* hugetlb_cgroup-support-noreserve-mappings.patch
* hugetlb-support-file_region-coalescing-again.patch
* hugetlb_cgroup-add-hugetlb_cgroup-reservation-tests.patch
* hugetlb_cgroup-add-hugetlb_cgroup-reservation-docs.patch
* mm-migratec-no-need-to-check-for-i-start-in-do_pages_move.patch
* mm-migratec-wrap-do_move_pages_to_node-and-store_status.patch
* mm-migratec-check-pagelist-in-move_pages_and_store_status.patch
* mm-migratec-unify-not-queued-for-migration-handling-in-do_pages_move.patch
* mm-migratec-migrate-pg_readahead-flag.patch
* mm-migratec-migrate-pg_readahead-flag-fix.patch
* drivers-base-memoryc-cache-memory-blocks-in-xarray-to-accelerate-lookup.patch
* drivers-base-memoryc-cache-memory-blocks-in-xarray-to-accelerate-lookup-fix.patch
* mm-adjust-shuffle-code-to-allow-for-future-coalescing.patch
* mm-use-zone-and-order-instead-of-free-area-in-free_list-manipulators.patch
* mm-add-function-__putback_isolated_page.patch
* mm-introduce-reported-pages.patch
* virtio-balloon-pull-page-poisoning-config-out-of-free-page-hinting.patch
* virtio-balloon-add-support-for-providing-free-page-reports-to-host.patch
* mm-page_reporting-rotate-reported-pages-to-the-tail-of-the-list.patch
* mm-page_reporting-add-budget-limit-on-how-many-pages-can-be-reported-per-pass.patch
* mm-page_reporting-add-free-page-reporting-documentation.patch
* drivers-base-memoryc-indicate-all-memory-blocks-as-removable.patch
* drivers-base-memoryc-drop-section_count.patch
* drivers-base-memoryc-drop-pages_correctly_probed.patch
* mm-page_extc-drop-pfn_present-check-when-onlining.patch
* zswap-allow-setting-default-status-compressor-and-allocator-in-kconfig.patch
* info-task-hung-in-generic_file_write_iter.patch
* info-task-hung-in-generic_file_write-fix.patch
* kernel-hung_taskc-monitor-killed-tasks.patch
* asm-generic-fix-unistd_32h-generation-format.patch
* maintainers-add-an-entry-for-kfifo.patch
* lib-test_lockup-test-module-to-generate-lockups.patch
* lib-bch-replace-zero-length-array-with-flexible-array-member.patch
* lib-objagg-replace-zero-length-arrays-with-flexible-array-member.patch
* lib-ts_bm-replace-zero-length-array-with-flexible-array-member.patch
* lib-ts_fsm-replace-zero-length-array-with-flexible-array-member.patch
* lib-ts_kmp-replace-zero-length-array-with-flexible-array-member.patch
* lib-scatterlist-fix-sg_copy_buffer-kerneldoc.patch
* string-add-stracpy-and-stracpy_pad-mechanisms.patch
* documentation-checkpatch-prefer-stracpy-strscpy-over-strcpy-strlcpy-strncpy.patch
* checkpatch-remove-email-address-comment-from-email-address-comparisons.patch
* checkpatch-check-spdx-tags-in-yaml-files.patch
* checkpatch-support-base-commit-format.patch
* checkpatch-prefer-fallthrough-over-fallthrough-comments.patch
* kernel-relayc-fix-read_pos-error-when-multiple-readers.patch
* aio-simplify-read_events.patch
* init-cleanup-anon_inodes-and-old-io-schedulers-options.patch
linux-next.patch
linux-next-rejects.patch
linux-next-fix.patch
* mm-frontswap-mark-various-intentional-data-races.patch
* mm-page_io-mark-various-intentional-data-races.patch
* mm-page_io-mark-various-intentional-data-races-v2.patch
* mm-swap_state-mark-various-intentional-data-races.patch
* mm-kmemleak-annotate-various-data-races-obj-ptr.patch
* mm-filemap-fix-a-data-race-in-filemap_fault.patch
* mm-swapfile-fix-and-annotate-various-data-races.patch
* mm-swapfile-fix-and-annotate-various-data-races-v2.patch
* mm-page_counter-fix-various-data-races-at-memsw.patch
* mm-memcontrol-fix-a-data-race-in-scan-count.patch
* mm-list_lru-fix-a-data-race-in-list_lru_count_one.patch
* mm-mempool-fix-a-data-race-in-mempool_free.patch
* mm-util-annotate-an-data-race-at-vm_committed_as.patch
* mm-rmap-annotate-a-data-race-at-tlb_flush_batched.patch
* drivers-tty-serial-sh-scic-suppress-warning.patch
* fix-read-buffer-overflow-in-delta-ipc.patch
make-sure-nobodys-leaking-resources.patch
releasing-resources-with-children.patch
mutex-subsystem-synchro-test-module.patch
kernel-forkc-export-kernel_thread-to-modules.patch
workaround-for-a-pci-restoring-bug.patch
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: mmotm 2020-02-13-22-26 uploaded (mm/hugetlb.c)
2020-02-14 6:26 ` mmotm 2020-02-13-22-26 uploaded Andrew Morton
@ 2020-02-14 16:29 ` Randy Dunlap
2020-02-14 17:18 ` Mike Kravetz
2020-02-14 16:49 ` mmotm 2020-02-13-22-26 uploaded (mm/migrate.c, hugetlb_cgroup.h) Randy Dunlap
1 sibling, 1 reply; 95+ messages in thread
From: Randy Dunlap @ 2020-02-14 16:29 UTC (permalink / raw)
To: Andrew Morton, broonie, linux-fsdevel, linux-kernel, linux-mm,
linux-next, mhocko, mm-commits, sfr, Matthew Wilcox
[-- Attachment #1: Type: text/plain, Size: 2361 bytes --]
On 2/13/20 10:26 PM, Andrew Morton wrote:
> The mm-of-the-moment snapshot 2020-02-13-22-26 has been uploaded to
>
> http://www.ozlabs.org/~akpm/mmotm/
>
> mmotm-readme.txt says
>
> README for mm-of-the-moment:
>
> http://www.ozlabs.org/~akpm/mmotm/
>
> This is a snapshot of my -mm patch queue. Uploaded at random hopefully
> more than once a week.
>
on x86_64:
CC mm/hugetlb.o
In file included from ../include/linux/kernel.h:15:0,
from ../include/linux/list.h:9,
from ../mm/hugetlb.c:6:
../mm/hugetlb.c: In function ‘dump_resv_map’:
../mm/hugetlb.c:301:30: error: ‘struct file_region’ has no member named ‘reservation_counter’
rg->from, rg->to, rg->reservation_counter, rg->css);
^
../include/linux/printk.h:304:33: note: in definition of macro ‘pr_err’
printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~~
../mm/hugetlb.c:301:55: error: ‘struct file_region’ has no member named ‘css’
rg->from, rg->to, rg->reservation_counter, rg->css);
^
../include/linux/printk.h:304:33: note: in definition of macro ‘pr_err’
printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~~
../mm/hugetlb.c: In function ‘check_coalesce_bug’:
../mm/hugetlb.c:320:10: error: ‘struct file_region’ has no member named ‘reservation_counter’
if (nrg->reservation_counter && nrg->from == rg->to &&
^~
../mm/hugetlb.c:321:10: error: ‘struct file_region’ has no member named ‘reservation_counter’
nrg->reservation_counter == rg->reservation_counter &&
^~
../mm/hugetlb.c:321:37: error: ‘struct file_region’ has no member named ‘reservation_counter’
nrg->reservation_counter == rg->reservation_counter &&
^~
../mm/hugetlb.c:322:10: error: ‘struct file_region’ has no member named ‘css’
nrg->css == rg->css) {
^~
../mm/hugetlb.c:322:21: error: ‘struct file_region’ has no member named ‘css’
nrg->css == rg->css) {
^~
Full randconfig file is attached.
--
~Randy
Reported-by: Randy Dunlap <rdunlap@infradead.org>
[-- Attachment #2: config-r9887 --]
[-- Type: text/plain, Size: 98906 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 5.6.0-rc1-mm1 Kernel Configuration
#
#
# Compiler: gcc (SUSE Linux) 7.5.0
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=70500
CONFIG_CLANG_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
CONFIG_UAPI_HEADER_TEST=y
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_USELIB is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_PSI=y
# CONFIG_PSI_DEFAULT_DISABLED is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU=y
# end of RCU Subsystem
# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_HUGETLB is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_DEBUG=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
# CONFIG_MULTIUSER is not set
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_FHANDLE is not set
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
# CONFIG_BUG is not set
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_RSEQ=y
CONFIG_DEBUG_RSEQ=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# end of Kernel Performance Events And Counters
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
# CONFIG_PROFILING is not set
# end of General setup
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DYNAMIC_PHYSICAL_MASK=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
# CONFIG_SMP is not set
CONFIG_X86_FEATURE_NAMES=y
# CONFIG_X86_MPPARSE is not set
CONFIG_GOLDFISH=y
# CONFIG_RETPOLINE is not set
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_GOLDFISH=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
# CONFIG_HYPERVISOR_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_NR_CPUS_RANGE_BEGIN=1
CONFIG_NR_CPUS_RANGE_END=1
CONFIG_NR_CPUS_DEFAULT=1
CONFIG_NR_CPUS=1
CONFIG_UP_LATE_INIT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_AMD_POWER=y
# end of Performance monitoring
# CONFIG_X86_16BIT is not set
# CONFIG_X86_VSYSCALL_EMULATION is not set
# CONFIG_X86_IOPL_IOPERM is not set
CONFIG_I8K=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_5LEVEL=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_X86_CPA_STATISTICS=y
CONFIG_AMD_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
CONFIG_ARCH_RANDOM=y
# CONFIG_X86_SMAP is not set
# CONFIG_X86_UMIP is not set
# CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS is not set
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# end of Processor type and features
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_PM is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
# CONFIG_ACPI is not set
CONFIG_SFI=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_CPU_IDLE_GOV_MENU is not set
CONFIG_CPU_IDLE_GOV_TEO=y
# end of CPU Idle
CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
# CONFIG_ISA_BUS is not set
# CONFIG_ISA_DMA_API is not set
# CONFIG_X86_SYSFB is not set
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
# CONFIG_IA32_EMULATION is not set
CONFIG_X86_X32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
# end of Binary Emulations
#
# Firmware Drivers
#
CONFIG_ARM_SCMI_PROTOCOL=y
# CONFIG_ARM_SCMI_POWER_DOMAIN is not set
CONFIG_ARM_SCPI_PROTOCOL=m
# CONFIG_ARM_SCPI_POWER_DOMAIN is not set
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=m
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_FW_CFG_SYSFS=y
CONFIG_FW_CFG_SYSFS_CMDLINE=y
# CONFIG_TURRIS_MOX_RWTM is not set
# CONFIG_BCM47XX_NVRAM is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_ISA_BUS_API=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
# CONFIG_VMAP_STACK is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_PLUGIN_HOSTCC=""
CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options
CONFIG_BASE_SMALL=1
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_FORCE=y
# CONFIG_MODULE_SIG_ALL is not set
#
# Do not forget to sign required modules with scripts/sign-file
#
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
# CONFIG_MODULE_COMPRESS is not set
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_CMDLINE_PARSER=y
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
CONFIG_ACORN_PARTITION_EESOX=y
# CONFIG_ACORN_PARTITION_ICS is not set
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_VIRTIO=y
#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
# CONFIG_BINFMT_ELF is not set
# CONFIG_BINFMT_SCRIPT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
CONFIG_MEM_SOFT_DIRTY=y
CONFIG_ZPOOL=y
# CONFIG_ZBUD is not set
CONFIG_Z3FOLD=m
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
# CONFIG_ZONE_DEVICE is not set
CONFIG_PERCPU_STATS=y
CONFIG_GUP_BENCHMARK=y
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# end of Memory Management options
# CONFIG_NET is not set
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
# CONFIG_PCI is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA is not set
#
# PC-card bridges
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_FW_LOADER_COMPRESS=y
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_SLIMBUS=m
CONFIG_REGMAP_SPMI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
CONFIG_HISILICON_LPC=y
CONFIG_QCOM_EBI2=y
CONFIG_FSL_MC_BUS=y
# end of Bus devices
CONFIG_GNSS=m
CONFIG_MTD=m
CONFIG_MTD_TESTS=m
#
# Partition parsers
#
# CONFIG_MTD_AR7_PARTS is not set
CONFIG_MTD_BCM63XX_PARTS=m
CONFIG_MTD_CMDLINE_PARTS=m
CONFIG_MTD_OF_PARTS=m
CONFIG_MTD_PARSER_IMAGETAG=m
CONFIG_MTD_PARSER_TRX=m
CONFIG_MTD_SHARPSL_PARTS=m
# CONFIG_MTD_REDBOOT_PARTS is not set
# end of Partition parsers
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
# CONFIG_MTD_BLOCK is not set
CONFIG_MTD_BLOCK_RO=m
# CONFIG_FTL is not set
CONFIG_NFTL=m
# CONFIG_NFTL_RW is not set
CONFIG_INFTL=m
# CONFIG_RFD_FTL is not set
CONFIG_SSFDC=m
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=m
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_NOSWAP is not set
CONFIG_MTD_CFI_BE_BYTE_SWAP=y
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_PHYSMAP_VERSATILE=y
CONFIG_MTD_PHYSMAP_GEMINI=y
# CONFIG_MTD_PHYSMAP_GPIO_ADDR is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
# CONFIG_MTD_TS5500 is not set
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PLATRAM=m
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=m
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers
CONFIG_MTD_NAND_CORE=m
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_NAND_ECC_SW_HAMMING=m
CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
CONFIG_MTD_RAW_NAND=m
CONFIG_MTD_NAND_ECC_SW_BCH=y
#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_AMS_DELTA=m
CONFIG_MTD_NAND_OMAP2=m
CONFIG_MTD_NAND_OMAP_BCH=y
CONFIG_MTD_NAND_OMAP_BCH_BUILD=m
CONFIG_MTD_NAND_TANGO=m
# CONFIG_MTD_NAND_SHARPSL is not set
# CONFIG_MTD_NAND_ATMEL is not set
# CONFIG_MTD_NAND_MARVELL is not set
CONFIG_MTD_NAND_SLC_LPC32XX=m
# CONFIG_MTD_NAND_MLC_LPC32XX is not set
CONFIG_MTD_NAND_BRCMNAND=m
CONFIG_MTD_NAND_OXNAS=m
CONFIG_MTD_NAND_FSL_IFC=m
# CONFIG_MTD_NAND_VF610_NFC is not set
CONFIG_MTD_NAND_MXC=m
CONFIG_MTD_NAND_SH_FLCTL=m
CONFIG_MTD_NAND_DAVINCI=m
CONFIG_MTD_NAND_TXX9NDFMC=m
CONFIG_MTD_NAND_FSMC=m
# CONFIG_MTD_NAND_SUNXI is not set
CONFIG_MTD_NAND_HISI504=m
CONFIG_MTD_NAND_QCOM=m
# CONFIG_MTD_NAND_MTK is not set
CONFIG_MTD_NAND_MXIC=m
CONFIG_MTD_NAND_TEGRA=m
CONFIG_MTD_NAND_STM32_FMC2=m
CONFIG_MTD_NAND_MESON=m
CONFIG_MTD_NAND_GPIO=m
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_CADENCE=m
#
# Misc
#
# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_FASTMAP=y
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_MTD_HYPERBUS is not set
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
# CONFIG_OF_ALL_DTBS is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
# CONFIG_BLK_DEV is not set
#
# NVME Support
#
CONFIG_NVME_CORE=y
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_HWMON is not set
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
CONFIG_NVME_TARGET=y
# CONFIG_NVME_TARGET_LOOP is not set
# CONFIG_NVME_TARGET_FC is not set
# end of NVME Support
#
# Misc devices
#
CONFIG_DUMMY_IRQ=y
# CONFIG_ATMEL_SSC is not set
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_QCOM_COINCELL is not set
CONFIG_QCOM_FASTRPC=y
CONFIG_SRAM=y
CONFIG_XILINX_SDFEC=y
CONFIG_MISC_RTSX=m
# CONFIG_PVPANIC is not set
CONFIG_C2PORT=y
# CONFIG_C2PORT_DURAMAR_2150 is not set
#
# EEPROM support
#
CONFIG_EEPROM_93CX6=y
# end of EEPROM support
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
#
# Altera FPGA firmware download module (requires I2C)
#
#
# Intel MIC & related support
#
CONFIG_VOP_BUS=y
CONFIG_VOP=y
CONFIG_VHOST_RING=y
# end of Intel MIC & related support
# CONFIG_ECHO is not set
CONFIG_MISC_RTSX_USB=m
# end of Misc devices
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
# CONFIG_SCSI_ENCLOSURE is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFSHCD_PLATFORM=m
CONFIG_SCSI_UFS_CDNS_PLATFORM=m
CONFIG_SCSI_UFS_DWC_TC_PLATFORM=m
CONFIG_SCSI_UFS_HISI=m
CONFIG_SCSI_UFS_TI_J721E=y
# CONFIG_SCSI_UFS_BSG is not set
CONFIG_SCSI_DEBUG=y
CONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_DH is not set
# end of SCSI device support
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
# CONFIG_FIREWIRE_SBP2 is not set
# end of IEEE 1394 (FireWire) support
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NVM=y
# CONFIG_NVM_PBLK is not set
#
# Input device support
#
CONFIG_INPUT=m
CONFIG_INPUT_LEDS=m
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
# CONFIG_TABLET_USB_GTCO is not set
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_PEGASUS=m
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=m
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ADC is not set
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m
CONFIG_TOUCHSCREEN_DYNAPRO=m
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_IPROC=m
CONFIG_TOUCHSCREEN_GUNZE=m
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
CONFIG_TOUCHSCREEN_IMX6UL_TSC=m
CONFIG_TOUCHSCREEN_INEXIO=m
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_RASPBERRYPI_FW=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_MXS_LRADC=m
CONFIG_TOUCHSCREEN_MX25=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
# CONFIG_TOUCHSCREEN_USB_3M is not set
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
# CONFIG_TOUCHSCREEN_USB_JASTEC is not set
# CONFIG_TOUCHSCREEN_USB_ELO is not set
# CONFIG_TOUCHSCREEN_USB_E2I is not set
# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
# CONFIG_TOUCHSCREEN_USB_EASYTOUCH is not set
CONFIG_TOUCHSCREEN_TOUCHIT213=m
# CONFIG_TOUCHSCREEN_TS4800 is not set
CONFIG_TOUCHSCREEN_TSC_SERIO=m
# CONFIG_TOUCHSCREEN_SUN4I is not set
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=m
# CONFIG_RMI4_F03 is not set
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
# CONFIG_RMI4_F55 is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=m
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=m
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_SERIO_APBPS2=m
CONFIG_SERIO_OLPC_APSP=m
CONFIG_SERIO_SUN4I_PS2=m
# CONFIG_SERIO_GPIO_PS2 is not set
CONFIG_USERIO=m
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=y
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
# CONFIG_TTY is not set
# CONFIG_DEVMEM is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_DEV_BUS is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
# CONFIG_IPMI_HANDLER is not set
CONFIG_IPMI_KCS_BMC=y
CONFIG_ASPEED_KCS_IPMI_BMC=m
CONFIG_NPCM7XX_KCS_IPMI_BMC=y
# CONFIG_ASPEED_BT_IPMI_BMC is not set
# CONFIG_HW_RANDOM is not set
CONFIG_HW_RANDOM_KEYSTONE=y
CONFIG_NVRAM=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=m
CONFIG_XILLYBUS=m
# CONFIG_XILLYBUS_OF is not set
# end of Character devices
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
#
# I2C support
#
# CONFIG_I2C is not set
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
CONFIG_SPMI=y
# CONFIG_SPMI_MSM_PMIC_ARB is not set
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=m
CONFIG_PPS=m
CONFIG_PPS_DEBUG=y
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_PARPORT=m
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_AMD=m
CONFIG_PINCTRL_BM1880=y
CONFIG_PINCTRL_DA850_PUPD=y
CONFIG_PINCTRL_LPC18XX=y
CONFIG_PINCTRL_RZA1=y
CONFIG_PINCTRL_RZA2=y
# CONFIG_PINCTRL_RZN1 is not set
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINCTRL_INGENIC=y
CONFIG_PINCTRL_OCELOT=y
# CONFIG_PINCTRL_OWL is not set
CONFIG_PINCTRL_ASPEED=y
CONFIG_PINCTRL_ASPEED_G4=y
CONFIG_PINCTRL_ASPEED_G5=y
# CONFIG_PINCTRL_ASPEED_G6 is not set
CONFIG_PINCTRL_BCM281XX=y
CONFIG_PINCTRL_BCM2835=y
# CONFIG_PINCTRL_IPROC_GPIO is not set
# CONFIG_PINCTRL_CYGNUS_MUX is not set
CONFIG_PINCTRL_NS=y
# CONFIG_PINCTRL_NSP_GPIO is not set
# CONFIG_PINCTRL_NS2_MUX is not set
CONFIG_PINCTRL_NSP_MUX=y
CONFIG_PINCTRL_BERLIN=y
CONFIG_PINCTRL_AS370=y
# CONFIG_PINCTRL_BERLIN_BG4CT is not set
# CONFIG_PINCTRL_NPCM7XX is not set
CONFIG_PINCTRL_PXA=y
CONFIG_PINCTRL_PXA25X=y
CONFIG_PINCTRL_PXA27X=y
CONFIG_PINCTRL_MSM=y
CONFIG_PINCTRL_APQ8064=y
# CONFIG_PINCTRL_APQ8084 is not set
CONFIG_PINCTRL_IPQ4019=m
# CONFIG_PINCTRL_IPQ8064 is not set
CONFIG_PINCTRL_IPQ8074=m
CONFIG_PINCTRL_MSM8660=m
# CONFIG_PINCTRL_MSM8960 is not set
# CONFIG_PINCTRL_MDM9615 is not set
CONFIG_PINCTRL_MSM8X74=m
CONFIG_PINCTRL_MSM8916=y
# CONFIG_PINCTRL_MSM8976 is not set
# CONFIG_PINCTRL_MSM8994 is not set
CONFIG_PINCTRL_MSM8996=m
CONFIG_PINCTRL_MSM8998=y
# CONFIG_PINCTRL_QCS404 is not set
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
# CONFIG_PINCTRL_SC7180 is not set
CONFIG_PINCTRL_SDM660=y
CONFIG_PINCTRL_SDM845=y
CONFIG_PINCTRL_SM8150=m
CONFIG_PINCTRL_SAMSUNG=y
# CONFIG_PINCTRL_EXYNOS is not set
CONFIG_PINCTRL_S3C24XX=y
# CONFIG_PINCTRL_S3C64XX is not set
# CONFIG_PINCTRL_SH_PFC is not set
CONFIG_PINCTRL_SH_PFC_GPIO=y
CONFIG_PINCTRL_SH_FUNC_GPIO=y
CONFIG_PINCTRL_PFC_EMEV2=y
CONFIG_PINCTRL_PFC_R8A73A4=y
CONFIG_PINCTRL_PFC_R8A7740=y
# CONFIG_PINCTRL_PFC_R8A7743 is not set
# CONFIG_PINCTRL_PFC_R8A7744 is not set
CONFIG_PINCTRL_PFC_R8A7745=y
# CONFIG_PINCTRL_PFC_R8A77470 is not set
# CONFIG_PINCTRL_PFC_R8A774A1 is not set
CONFIG_PINCTRL_PFC_R8A774B1=y
# CONFIG_PINCTRL_PFC_R8A774C0 is not set
CONFIG_PINCTRL_PFC_R8A7778=y
CONFIG_PINCTRL_PFC_R8A7779=y
# CONFIG_PINCTRL_PFC_R8A7790 is not set
CONFIG_PINCTRL_PFC_R8A7791=y
# CONFIG_PINCTRL_PFC_R8A7792 is not set
# CONFIG_PINCTRL_PFC_R8A7793 is not set
# CONFIG_PINCTRL_PFC_R8A7794 is not set
# CONFIG_PINCTRL_PFC_R8A77950 is not set
# CONFIG_PINCTRL_PFC_R8A77951 is not set
# CONFIG_PINCTRL_PFC_R8A77960 is not set
# CONFIG_PINCTRL_PFC_R8A77961 is not set
CONFIG_PINCTRL_PFC_R8A77965=y
# CONFIG_PINCTRL_PFC_R8A77970 is not set
CONFIG_PINCTRL_PFC_R8A77980=y
# CONFIG_PINCTRL_PFC_R8A77990 is not set
CONFIG_PINCTRL_PFC_R8A77995=y
# CONFIG_PINCTRL_PFC_SH7203 is not set
# CONFIG_PINCTRL_PFC_SH7264 is not set
# CONFIG_PINCTRL_PFC_SH7269 is not set
CONFIG_PINCTRL_PFC_SH73A0=y
# CONFIG_PINCTRL_PFC_SH7720 is not set
CONFIG_PINCTRL_PFC_SH7722=y
# CONFIG_PINCTRL_PFC_SH7723 is not set
CONFIG_PINCTRL_PFC_SH7724=y
CONFIG_PINCTRL_PFC_SH7734=y
# CONFIG_PINCTRL_PFC_SH7757 is not set
CONFIG_PINCTRL_PFC_SH7785=y
# CONFIG_PINCTRL_PFC_SH7786 is not set
# CONFIG_PINCTRL_PFC_SHX3 is not set
CONFIG_PINCTRL_SPRD=y
CONFIG_PINCTRL_SPRD_SC9860=y
CONFIG_PINCTRL_STM32=y
# CONFIG_PINCTRL_STM32F429 is not set
# CONFIG_PINCTRL_STM32F469 is not set
# CONFIG_PINCTRL_STM32F746 is not set
CONFIG_PINCTRL_STM32F769=y
CONFIG_PINCTRL_STM32H743=y
# CONFIG_PINCTRL_STM32MP157 is not set
# CONFIG_PINCTRL_TI_IODELAY is not set
CONFIG_PINCTRL_UNIPHIER=y
# CONFIG_PINCTRL_UNIPHIER_LD4 is not set
CONFIG_PINCTRL_UNIPHIER_PRO4=y
# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO5 is not set
CONFIG_PINCTRL_UNIPHIER_PXS2=y
# CONFIG_PINCTRL_UNIPHIER_LD6B is not set
CONFIG_PINCTRL_UNIPHIER_LD11=y
# CONFIG_PINCTRL_UNIPHIER_LD20 is not set
# CONFIG_PINCTRL_UNIPHIER_PXS3 is not set
#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
CONFIG_PINCTRL_MTK_MOORE=y
CONFIG_PINCTRL_MTK_PARIS=y
CONFIG_PINCTRL_MT2701=y
# CONFIG_PINCTRL_MT7623 is not set
CONFIG_PINCTRL_MT7629=y
# CONFIG_PINCTRL_MT8135 is not set
CONFIG_PINCTRL_MT8127=y
CONFIG_PINCTRL_MT2712=y
# CONFIG_PINCTRL_MT6765 is not set
# CONFIG_PINCTRL_MT6797 is not set
# CONFIG_PINCTRL_MT7622 is not set
CONFIG_PINCTRL_MT8173=y
CONFIG_PINCTRL_MT8183=y
# CONFIG_PINCTRL_MT8516 is not set
# CONFIG_PINCTRL_MT6397 is not set
# end of MediaTek pinctrl drivers
CONFIG_PINCTRL_MADERA=m
CONFIG_PINCTRL_CS47L15=y
CONFIG_PINCTRL_CS47L35=y
CONFIG_PINCTRL_CS47L92=y
# CONFIG_PINCTRL_EQUILIBRIUM is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_GENERIC=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
CONFIG_GPIO_ASPEED=m
# CONFIG_GPIO_ASPEED_SGPIO is not set
CONFIG_GPIO_ATH79=m
# CONFIG_GPIO_RASPBERRYPI_EXP is not set
# CONFIG_GPIO_BCM_KONA is not set
CONFIG_GPIO_BCM_XGS_IPROC=y
CONFIG_GPIO_BRCMSTB=y
# CONFIG_GPIO_CADENCE is not set
CONFIG_GPIO_CLPS711X=m
# CONFIG_GPIO_DWAPB is not set
CONFIG_GPIO_EIC_SPRD=m
CONFIG_GPIO_EM=y
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=m
CONFIG_GPIO_HLWD=m
# CONFIG_GPIO_IOP is not set
CONFIG_GPIO_LOGICVC=y
# CONFIG_GPIO_LPC18XX is not set
# CONFIG_GPIO_LPC32XX is not set
CONFIG_GPIO_MB86S7X=m
CONFIG_GPIO_MENZ127=m
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_MT7621 is not set
# CONFIG_GPIO_PMIC_EIC_SPRD is not set
CONFIG_GPIO_RCAR=m
# CONFIG_GPIO_RDA is not set
CONFIG_GPIO_SAMA5D2_PIOBU=m
# CONFIG_GPIO_SIFIVE is not set
CONFIG_GPIO_SNPS_CREG=y
CONFIG_GPIO_SPRD=y
CONFIG_GPIO_STP_XWAY=y
CONFIG_GPIO_SYSCON=m
# CONFIG_GPIO_TEGRA is not set
CONFIG_GPIO_TEGRA186=y
CONFIG_GPIO_TS4800=y
CONFIG_GPIO_UNIPHIER=y
CONFIG_GPIO_WCD934X=m
# CONFIG_GPIO_XILINX is not set
CONFIG_GPIO_XLP=y
# CONFIG_GPIO_ZX is not set
CONFIG_GPIO_AMD_FCH=y
# end of Memory mapped GPIO drivers
#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_104_DIO_48E is not set
CONFIG_GPIO_104_IDIO_16=y
# CONFIG_GPIO_104_IDI_48 is not set
CONFIG_GPIO_F7188X=m
CONFIG_GPIO_GPIO_MM=y
# CONFIG_GPIO_IT87 is not set
CONFIG_GPIO_SCH311X=m
# CONFIG_GPIO_TS5500 is not set
CONFIG_GPIO_WINBOND=m
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers
#
# MFD GPIO expanders
#
# CONFIG_GPIO_KEMPLD is not set
CONFIG_GPIO_MADERA=m
CONFIG_GPIO_TQMX86=m
# end of MFD GPIO expanders
#
# USB GPIO expanders
#
# CONFIG_GPIO_VIPERBOARD is not set
# end of USB GPIO expanders
CONFIG_GPIO_MOCKUP=y
CONFIG_W1=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_MXC=y
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
CONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2405=m
CONFIG_W1_SLAVE_DS2408=m
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
# CONFIG_W1_SLAVE_DS2413 is not set
CONFIG_W1_SLAVE_DS2406=m
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2805=m
CONFIG_W1_SLAVE_DS2430=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
# CONFIG_W1_SLAVE_DS2438 is not set
# CONFIG_W1_SLAVE_DS250X is not set
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
# end of 1-wire Slaves
CONFIG_POWER_AVS=y
# CONFIG_QCOM_CPR is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_POWER_SUPPLY_HWMON is not set
# CONFIG_PDA_POWER is not set
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_TEST_POWER=y
CONFIG_BATTERY_ACT8945A=m
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
# CONFIG_BATTERY_LEGO_EV3 is not set
# CONFIG_BATTERY_INGENIC is not set
CONFIG_BATTERY_BQ27XXX=m
# CONFIG_BATTERY_BQ27XXX_HDQ is not set
# CONFIG_BATTERY_MAX1721X is not set
CONFIG_CHARGER_ISP1704=y
CONFIG_CHARGER_MAX8903=m
CONFIG_CHARGER_GPIO=m
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_LT3651=y
CONFIG_CHARGER_QCOM_SMBB=m
CONFIG_BATTERY_GOLDFISH=y
CONFIG_CHARGER_SC2731=y
CONFIG_FUEL_GAUGE_SC27XX=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AS370=y
CONFIG_SENSORS_AXI_FAN_CONTROL=y
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_SENSORS_ARM_SCMI=y
# CONFIG_SENSORS_ARM_SCPI is not set
CONFIG_SENSORS_ASPEED=y
CONFIG_SENSORS_DELL_SMM=y
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MLXREG_FAN=y
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=y
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NSA320 is not set
CONFIG_SENSORS_OCC_P9_SBE=m
CONFIG_SENSORS_OCC=m
CONFIG_SENSORS_PWM_FAN=m
# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VT1211=m
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
CONFIG_THERMAL=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
# CONFIG_THERMAL_OF is not set
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_GOV_STEP_WISE is not set
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_DEVFREQ_THERMAL=y
# CONFIG_THERMAL_EMULATION is not set
CONFIG_THERMAL_MMIO=y
CONFIG_HISI_THERMAL=y
CONFIG_IMX_THERMAL=m
# CONFIG_SPEAR_THERMAL is not set
CONFIG_SUN8I_THERMAL=m
# CONFIG_ROCKCHIP_THERMAL is not set
# CONFIG_RCAR_THERMAL is not set
CONFIG_RCAR_GEN3_THERMAL=y
CONFIG_KIRKWOOD_THERMAL=y
CONFIG_DOVE_THERMAL=y
CONFIG_ARMADA_THERMAL=y
CONFIG_DA9062_THERMAL=m
CONFIG_MTK_THERMAL=m
#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=m
#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers
#
# Broadcom thermal drivers
#
CONFIG_BRCMSTB_THERMAL=m
CONFIG_BCM_NS_THERMAL=m
CONFIG_BCM_SR_THERMAL=m
# end of Broadcom thermal drivers
#
# Texas Instruments thermal drivers
#
CONFIG_TI_SOC_THERMAL=y
CONFIG_TI_THERMAL=y
# CONFIG_OMAP3_THERMAL is not set
# CONFIG_OMAP4_THERMAL is not set
# CONFIG_OMAP5_THERMAL is not set
CONFIG_DRA752_THERMAL=y
# end of Texas Instruments thermal drivers
#
# Samsung thermal drivers
#
# end of Samsung thermal drivers
CONFIG_TANGO_THERMAL=y
CONFIG_GENERIC_ADC_THERMAL=m
#
# Qualcomm thermal drivers
#
CONFIG_QCOM_SPMI_TEMP_ALARM=m
# end of Qualcomm thermal drivers
# CONFIG_ZX2967_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_SUN4I_GPADC=y
CONFIG_MFD_AT91_USART=m
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=m
CONFIG_MFD_MADERA=m
CONFIG_MFD_CS47L15=y
CONFIG_MFD_CS47L35=y
# CONFIG_MFD_CS47L85 is not set
# CONFIG_MFD_CS47L90 is not set
CONFIG_MFD_CS47L92=y
# CONFIG_MFD_DLN2 is not set
CONFIG_MFD_EXYNOS_LPASS=m
CONFIG_MFD_MXS_LRADC=y
CONFIG_MFD_MX25_TSADC=m
# CONFIG_MFD_HI6421_PMIC is not set
CONFIG_MFD_HI655X_PMIC=y
CONFIG_HTC_PASIC3=y
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_MT6397=y
CONFIG_MFD_VIPERBOARD=m
CONFIG_MFD_PM8XXX=m
CONFIG_MFD_SPMI_PMIC=m
# CONFIG_MFD_SM501 is not set
CONFIG_ABX500_CORE=y
CONFIG_MFD_SUN6I_PRCM=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=m
CONFIG_MFD_TQMX86=m
# CONFIG_MFD_STM32_LPTIMER is not set
# CONFIG_MFD_STM32_TIMERS is not set
CONFIG_MFD_WCD934X=m
# end of Multifunction device drivers
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=m
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_GPIO=y
# CONFIG_REGULATOR_HI655X is not set
# CONFIG_REGULATOR_MT6323 is not set
CONFIG_REGULATOR_MT6397=m
CONFIG_REGULATOR_PBIAS=y
# CONFIG_REGULATOR_QCOM_RPMH is not set
CONFIG_REGULATOR_QCOM_SMD_RPM=m
CONFIG_REGULATOR_QCOM_SPMI=m
CONFIG_REGULATOR_SC2731=m
# CONFIG_REGULATOR_STM32_BOOSTER is not set
CONFIG_REGULATOR_STM32_VREFBUF=m
CONFIG_REGULATOR_STM32_PWR=y
# CONFIG_REGULATOR_STW481X_VMMC is not set
CONFIG_REGULATOR_UNIPHIER=m
CONFIG_REGULATOR_VCTRL=m
CONFIG_RC_CORE=m
# CONFIG_RC_MAP is not set
CONFIG_LIRC=y
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
# CONFIG_IR_MCE_KBD_DECODER is not set
# CONFIG_IR_XMP_DECODER is not set
# CONFIG_IR_IMON_DECODER is not set
CONFIG_IR_RCMM_DECODER=m
CONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not set
CONFIG_IR_ENE=m
# CONFIG_IR_HIX5HD2 is not set
CONFIG_IR_IMON=m
CONFIG_IR_IMON_RAW=m
CONFIG_IR_MCEUSB=m
# CONFIG_IR_ITE_CIR is not set
CONFIG_IR_FINTEK=m
CONFIG_IR_MESON=m
CONFIG_IR_MTK=m
# CONFIG_IR_NUVOTON is not set
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
# CONFIG_IR_WINBOND_CIR is not set
CONFIG_IR_IGORPLUGUSB=m
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
CONFIG_IR_RX51=m
# CONFIG_IR_IMG is not set
# CONFIG_RC_LOOPBACK is not set
# CONFIG_IR_GPIO_CIR is not set
CONFIG_IR_GPIO_TX=m
CONFIG_RC_ST=m
CONFIG_IR_SUNXI=m
# CONFIG_IR_SERIAL is not set
CONFIG_IR_SIR=m
CONFIG_IR_TANGO=m
CONFIG_RC_XBOX_DVD=m
CONFIG_IR_ZX=m
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_IMX_IPUV3_CORE=y
# CONFIG_DRM is not set
#
# ARM devices
#
# end of ARM devices
#
# ACP (Audio CoProcessor) Configuration
#
# end of ACP (Audio CoProcessor) Configuration
#
# Frame buffer Devices
#
# CONFIG_FB is not set
CONFIG_MMP_DISP=m
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_QCOM_WLED is not set
CONFIG_BACKLIGHT_SAHARA=m
# CONFIG_BACKLIGHT_GPIO is not set
# end of Backlight & LCD device support
# end of Graphics support
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=m
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
CONFIG_UHID=m
# CONFIG_HID_GENERIC is not set
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
CONFIG_HID_ACCUTOUCH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
# CONFIG_HID_APPLE is not set
CONFIG_HID_APPLEIR=m
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
# CONFIG_HID_BELKIN is not set
CONFIG_HID_BETOP_FF=m
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
# CONFIG_HID_CORSAIR is not set
CONFIG_HID_COUGAR=m
CONFIG_HID_MACALLY=m
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELAN=m
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
CONFIG_HID_GFRM=m
# CONFIG_HID_HOLTEK is not set
CONFIG_HID_GT683R=m
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
CONFIG_HID_ITE=m
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MALTRON=m
CONFIG_HID_MAYFLASH=m
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTI=m
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
CONFIG_HID_PICOLCD=m
# CONFIG_HID_PICOLCD_BACKLIGHT is not set
# CONFIG_HID_PICOLCD_LCD is not set
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
# CONFIG_HID_PRIMAX is not set
CONFIG_HID_RETRODE=m
CONFIG_HID_ROCCAT=m
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=m
# CONFIG_HID_SONY is not set
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEAM=m
# CONFIG_HID_STEELSERIES is not set
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
# CONFIG_HID_SMARTJOYPLUS is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_UDRAW_PS3=m
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
# CONFIG_HID_ALPS is not set
# end of Special HID drivers
#
# USB HID support
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
# end of USB HID Boot Protocol drivers
# end of USB HID support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
CONFIG_USB_ULPI_BUS=y
CONFIG_USB_CONN_GPIO=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=m
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=m
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_XHCI_HCD=m
CONFIG_USB_XHCI_PLATFORM=m
CONFIG_USB_XHCI_HISTB=m
CONFIG_USB_XHCI_MTK=m
CONFIG_USB_XHCI_MVEBU=m
CONFIG_USB_XHCI_RCAR=m
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_FOTG210_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_SPEAR=m
# CONFIG_USB_OHCI_HCD_STI is not set
# CONFIG_USB_OHCI_HCD_S3C2410 is not set
CONFIG_USB_OHCI_HCD_AT91=m
# CONFIG_USB_OHCI_HCD_OMAP3 is not set
CONFIG_USB_OHCI_HCD_DAVINCI=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_SH is not set
CONFIG_USB_OHCI_EXYNOS=m
CONFIG_USB_CNS3XXX_OHCI=y
CONFIG_USB_OHCI_HCD_PLATFORM=m
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_RENESAS_USBHS_HCD=m
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set
CONFIG_USB_RENESAS_USBHS=m
#
# USB Device Class drivers
#
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
# CONFIG_USB_STORAGE_SDDR09 is not set
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=m
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_STORAGE_ENE_UB6250=m
# CONFIG_USB_UAS is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_CDNS3=m
# CONFIG_USB_CDNS3_GADGET is not set
CONFIG_USB_CDNS3_HOST=y
CONFIG_USB_CDNS3_TI=m
CONFIG_USB_CDNS3_IMX=m
CONFIG_USB_MTU3=y
CONFIG_USB_MTU3_GADGET=y
CONFIG_USB_MTU3_DEBUG=y
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
CONFIG_USB_DWC2=y
#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
CONFIG_USB_DWC2_PERIPHERAL=y
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
CONFIG_USB_CHIPIDEA=m
CONFIG_USB_CHIPIDEA_OF=m
# CONFIG_USB_CHIPIDEA_UDC is not set
CONFIG_USB_ISP1760=m
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
CONFIG_USB_ISP1760_GADGET_ROLE=y
# CONFIG_USB_ISP1760_DUAL_ROLE is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
# CONFIG_USB_EMI26 is not set
CONFIG_USB_ADUTUX=m
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYPRESS_CY7C63=m
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
CONFIG_USB_EHSET_TEST_FIXTURE=m
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_LINK_LAYER_TEST is not set
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_KEYSTONE_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_AM335X_CONTROL_USB=m
CONFIG_AM335X_PHY_USB=m
CONFIG_USB_GPIO_VBUS=m
CONFIG_USB_TEGRA_PHY=y
CONFIG_USB_ULPI=y
CONFIG_USB_ULPI_VIEWPORT=y
# end of USB Physical Layer drivers
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
#
# USB Peripheral Controller
#
CONFIG_USB_FOTG210_UDC=m
CONFIG_USB_GR_UDC=y
CONFIG_USB_R8A66597=m
CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_USB_RENESAS_USB3=y
CONFIG_USB_PXA27X=m
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_SNP_UDC_PLAT is not set
CONFIG_USB_M66592=y
CONFIG_USB_BDC_UDC=y
#
# Platform Support
#
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_GADGET_XILINX is not set
# CONFIG_USB_ASPEED_VHUB is not set
# end of USB Peripheral Controller
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_MASS_STORAGE=m
CONFIG_USB_F_PRINTER=m
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
# CONFIG_USB_CONFIGFS_F_LB_SS is not set
# CONFIG_USB_CONFIGFS_F_FS is not set
# CONFIG_USB_CONFIGFS_F_HID is not set
CONFIG_USB_CONFIGFS_F_PRINTER=y
# CONFIG_TYPEC is not set
CONFIG_USB_ROLE_SWITCH=y
CONFIG_MMC=m
# CONFIG_PWRSEQ_EMMC is not set
CONFIG_PWRSEQ_SIMPLE=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_TEST=m
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_OMAP_HS is not set
# CONFIG_MMC_GOLDFISH is not set
CONFIG_MMC_TMIO_CORE=m
# CONFIG_MMC_SDHI is not set
CONFIG_MMC_UNIPHIER=m
# CONFIG_MMC_DW is not set
CONFIG_MMC_SH_MMCIF=m
# CONFIG_MMC_VUB300 is not set
CONFIG_MMC_USHC=m
CONFIG_MMC_USDHI6ROL0=m
CONFIG_MMC_REALTEK_USB=m
# CONFIG_MMC_CQHCI is not set
CONFIG_MMC_BCM2835=m
# CONFIG_MMC_MTK is not set
CONFIG_MMC_OWL=m
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y
CONFIG_MS_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_REALTEK_USB=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
# CONFIG_LEDS_CLASS_FLASH is not set
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
# CONFIG_LEDS_APU is not set
CONFIG_LEDS_BCM6328=m
CONFIG_LEDS_BCM6358=m
CONFIG_LEDS_MT6323=m
CONFIG_LEDS_GPIO=m
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_LT3593=m
# CONFIG_LEDS_OT200 is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_PM8058=m
CONFIG_LEDS_MLXCPLD=m
CONFIG_LEDS_MLXREG=m
# CONFIG_LEDS_USER is not set
CONFIG_LEDS_TI_LMU_COMMON=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
CONFIG_LEDS_TRIGGER_CAMERA=m
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_PATTERN=y
# CONFIG_LEDS_TRIGGER_AUDIO is not set
CONFIG_ACCESSIBILITY=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
# CONFIG_RTC_NVMEM is not set
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
#
# SPI RTC drivers
#
#
# SPI and I2C RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1286=m
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1685_FAMILY=m
# CONFIG_RTC_DRV_DS1685 is not set
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
CONFIG_RTC_DRV_DS17885=y
# CONFIG_RTC_DRV_DS1742 is not set
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=y
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=m
# CONFIG_RTC_DRV_RP5C01 is not set
CONFIG_RTC_DRV_V3020=m
CONFIG_RTC_DRV_SC27XX=y
CONFIG_RTC_DRV_SPEAR=m
CONFIG_RTC_DRV_ZYNQMP=m
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_ASM9260=m
# CONFIG_RTC_DRV_DAVINCI is not set
CONFIG_RTC_DRV_DIGICOLOR=m
CONFIG_RTC_DRV_MESON=y
CONFIG_RTC_DRV_MESON_VRTC=y
# CONFIG_RTC_DRV_OMAP is not set
CONFIG_RTC_DRV_S3C=y
# CONFIG_RTC_DRV_EP93XX is not set
# CONFIG_RTC_DRV_VR41XX is not set
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_RTC_DRV_GENERIC=m
# CONFIG_RTC_DRV_VT8500 is not set
# CONFIG_RTC_DRV_SUNXI is not set
# CONFIG_RTC_DRV_TX4939 is not set
CONFIG_RTC_DRV_MV=y
CONFIG_RTC_DRV_ARMADA38X=y
CONFIG_RTC_DRV_CADENCE=m
CONFIG_RTC_DRV_FTRTC010=y
CONFIG_RTC_DRV_COH901331=y
# CONFIG_RTC_DRV_STMP is not set
CONFIG_RTC_DRV_JZ4740=y
# CONFIG_RTC_DRV_LPC24XX is not set
CONFIG_RTC_DRV_LPC32XX=y
CONFIG_RTC_DRV_PM8XXX=y
# CONFIG_RTC_DRV_TEGRA is not set
# CONFIG_RTC_DRV_SNVS is not set
CONFIG_RTC_DRV_MOXART=y
# CONFIG_RTC_DRV_MT6397 is not set
CONFIG_RTC_DRV_MT7622=m
CONFIG_RTC_DRV_XGENE=m
CONFIG_RTC_DRV_R7301=m
# CONFIG_RTC_DRV_STM32 is not set
CONFIG_RTC_DRV_RTD119X=y
CONFIG_RTC_DRV_ASPEED=m
#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=m
# CONFIG_RTC_DRV_GOLDFISH is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y
#
# DMA Devices
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
# CONFIG_ALTERA_MSGDMA is not set
CONFIG_AXI_DMAC=y
CONFIG_COH901318=y
# CONFIG_DMA_JZ4780 is not set
# CONFIG_DMA_SA11X0 is not set
CONFIG_DMA_SUN6I=y
CONFIG_DW_AXI_DMAC=y
CONFIG_EP93XX_DMA=y
# CONFIG_FSL_EDMA is not set
CONFIG_IMG_MDC_DMA=m
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_INTEL_IOP_ADMA is not set
CONFIG_K3_DMA=y
CONFIG_MCF_EDMA=m
# CONFIG_MILBEAUT_HDMAC is not set
CONFIG_MILBEAUT_XDMAC=y
CONFIG_MMP_PDMA=y
# CONFIG_MMP_TDMA is not set
# CONFIG_MV_XOR is not set
# CONFIG_MXS_DMA is not set
CONFIG_NBPFAXI_DMA=y
# CONFIG_STM32_DMA is not set
# CONFIG_STM32_DMAMUX is not set
# CONFIG_STM32_MDMA is not set
CONFIG_SPRD_DMA=y
CONFIG_S3C24XX_DMAC=y
CONFIG_TEGRA210_ADMA=y
CONFIG_TIMB_DMA=m
CONFIG_UNIPHIER_MDMAC=m
CONFIG_XGENE_DMA=m
CONFIG_ZX_DMA=m
# CONFIG_MTK_HSDMA is not set
# CONFIG_MTK_CQDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=m
CONFIG_DW_DMAC=m
CONFIG_SF_PDMA=y
CONFIG_RENESAS_DMA=y
CONFIG_SH_DMAE_BASE=y
CONFIG_SH_DMAE=m
CONFIG_RCAR_DMAC=y
CONFIG_RENESAS_USB_DMAC=y
CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=m
CONFIG_TI_DMA_CROSSBAR=y
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_UDMABUF=y
# CONFIG_DMABUF_SELFTESTS is not set
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_HEAPS_SYSTEM=y
CONFIG_DMABUF_HEAPS_CMA=y
# end of DMABUF options
CONFIG_AUXDISPLAY=y
CONFIG_HD44780=m
CONFIG_IMG_ASCII_LCD=m
CONFIG_PARPORT_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
# CONFIG_CHARLCD_BL_OFF is not set
CONFIG_CHARLCD_BL_ON=y
# CONFIG_CHARLCD_BL_FLASH is not set
CONFIG_PANEL=m
CONFIG_CHARLCD=m
CONFIG_UIO=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_DMEM_GENIRQ is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
CONFIG_GREYBUS=m
CONFIG_GREYBUS_ES2=m
CONFIG_STAGING=y
CONFIG_COMEDI=m
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
# CONFIG_COMEDI_MISC_DRIVERS is not set
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=m
CONFIG_COMEDI_PCL724=m
CONFIG_COMEDI_PCL726=m
CONFIG_COMEDI_PCL730=m
CONFIG_COMEDI_PCL812=m
CONFIG_COMEDI_PCL816=m
CONFIG_COMEDI_PCL818=m
CONFIG_COMEDI_PCM3724=m
CONFIG_COMEDI_AMPLC_DIO200_ISA=m
CONFIG_COMEDI_AMPLC_PC236_ISA=m
CONFIG_COMEDI_AMPLC_PC263_ISA=m
CONFIG_COMEDI_RTI800=m
CONFIG_COMEDI_RTI802=m
CONFIG_COMEDI_DAC02=m
CONFIG_COMEDI_DAS16M1=m
# CONFIG_COMEDI_DAS08_ISA is not set
CONFIG_COMEDI_DAS16=m
CONFIG_COMEDI_DAS800=m
# CONFIG_COMEDI_DAS1800 is not set
# CONFIG_COMEDI_DAS6402 is not set
CONFIG_COMEDI_DT2801=m
# CONFIG_COMEDI_DT2811 is not set
CONFIG_COMEDI_DT2814=m
CONFIG_COMEDI_DT2815=m
# CONFIG_COMEDI_DT2817 is not set
CONFIG_COMEDI_DT282X=m
CONFIG_COMEDI_DMM32AT=m
# CONFIG_COMEDI_FL512 is not set
CONFIG_COMEDI_AIO_AIO12_8=m
CONFIG_COMEDI_AIO_IIRO_16=m
CONFIG_COMEDI_II_PCI20KC=m
# CONFIG_COMEDI_C6XDIGIO is not set
# CONFIG_COMEDI_MPC624 is not set
CONFIG_COMEDI_ADQ12B=m
CONFIG_COMEDI_NI_AT_A2150=m
# CONFIG_COMEDI_NI_AT_AO is not set
CONFIG_COMEDI_NI_ATMIO=m
# CONFIG_COMEDI_NI_ATMIO16D is not set
CONFIG_COMEDI_NI_LABPC_ISA=m
# CONFIG_COMEDI_PCMAD is not set
CONFIG_COMEDI_PCMDA12=m
CONFIG_COMEDI_PCMMIO=m
# CONFIG_COMEDI_PCMUIO is not set
# CONFIG_COMEDI_MULTIQ3 is not set
# CONFIG_COMEDI_S526 is not set
CONFIG_COMEDI_USB_DRIVERS=m
CONFIG_COMEDI_DT9812=m
# CONFIG_COMEDI_NI_USB6501 is not set
CONFIG_COMEDI_USBDUX=m
CONFIG_COMEDI_USBDUXFAST=m
# CONFIG_COMEDI_USBDUXSIGMA is not set
# CONFIG_COMEDI_VMK80XX is not set
CONFIG_COMEDI_8254=m
CONFIG_COMEDI_8255=m
# CONFIG_COMEDI_8255_SA is not set
# CONFIG_COMEDI_KCOMEDILIB is not set
CONFIG_COMEDI_AMPLC_DIO200=m
CONFIG_COMEDI_AMPLC_PC236=m
CONFIG_COMEDI_NI_LABPC=m
CONFIG_COMEDI_NI_TIO=m
CONFIG_COMEDI_NI_ROUTING=m
#
# IIO staging drivers
#
#
# Accelerometers
#
# end of Accelerometers
#
# Analog to digital converters
#
# end of Analog to digital converters
#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=m
# end of Analog digital bi-direction converters
#
# Capacitance to digital converters
#
# end of Capacitance to digital converters
#
# Direct Digital Synthesis
#
# end of Direct Digital Synthesis
#
# Network Analyzer, Impedance Converters
#
# end of Network Analyzer, Impedance Converters
#
# Active energy metering IC
#
# end of Active energy metering IC
#
# Resolver to digital converters
#
# end of Resolver to digital converters
# end of IIO staging drivers
#
# Speakup console speech
#
# end of Speakup console speech
CONFIG_STAGING_MEDIA=y
#
# Android
#
# end of Android
# CONFIG_GOLDFISH_AUDIO is not set
CONFIG_GS_FPGABOOT=m
CONFIG_UNISYSSPAR=y
CONFIG_FSL_DPAA2=y
CONFIG_MOST=y
CONFIG_MOST_CDEV=y
CONFIG_MOST_DIM2=m
# CONFIG_GREYBUS_BOOTROM is not set
CONFIG_GREYBUS_HID=m
# CONFIG_GREYBUS_LIGHT is not set
# CONFIG_GREYBUS_LOG is not set
# CONFIG_GREYBUS_LOOPBACK is not set
CONFIG_GREYBUS_POWER=m
CONFIG_GREYBUS_RAW=m
CONFIG_GREYBUS_VIBRATOR=m
# CONFIG_GREYBUS_BRIDGED_PHY is not set
CONFIG_GREYBUS_ARCHE=m
CONFIG_BCM_VIDEOCORE=y
# CONFIG_BCM2835_VCHIQ is not set
#
# Gasket devices
#
# end of Gasket devices
# CONFIG_XIL_AXIS_FIFO is not set
# CONFIG_FIELDBUS_DEV is not set
CONFIG_USB_WUSB_CBAF=m
CONFIG_USB_WUSB_CBAF_DEBUG=y
# CONFIG_UWB is not set
CONFIG_STAGING_EXFAT_FS=m
# CONFIG_STAGING_EXFAT_DISCARD is not set
# CONFIG_STAGING_EXFAT_DELAYED_SYNC is not set
CONFIG_STAGING_EXFAT_KERNEL_DEBUG=y
CONFIG_STAGING_EXFAT_DEBUG_MSG=y
CONFIG_STAGING_EXFAT_DEFAULT_CODEPAGE=437
CONFIG_STAGING_EXFAT_DEFAULT_IOCHARSET="utf8"
# CONFIG_X86_PLATFORM_DEVICES is not set
# CONFIG_GOLDFISH_PIPE is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_IO=y
# CONFIG_OLPC_XO175 is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
CONFIG_CLKSRC_MMIO=y
CONFIG_BCM2835_TIMER=y
# CONFIG_BCM_KONA_TIMER is not set
CONFIG_DAVINCI_TIMER=y
# CONFIG_DIGICOLOR_TIMER is not set
CONFIG_DW_APB_TIMER=y
# CONFIG_FTTMR010_TIMER is not set
# CONFIG_IXP4XX_TIMER is not set
CONFIG_MESON6_TIMER=y
CONFIG_OWL_TIMER=y
CONFIG_RDA_TIMER=y
CONFIG_SUN4I_TIMER=y
# CONFIG_TEGRA_TIMER is not set
# CONFIG_VT8500_TIMER is not set
# CONFIG_NPCM7XX_TIMER is not set
# CONFIG_ASM9260_TIMER is not set
CONFIG_CLKSRC_DBX500_PRCMU=y
CONFIG_CLPS711X_TIMER=y
# CONFIG_ATLAS7_TIMER is not set
CONFIG_MXS_TIMER=y
CONFIG_PRIMA2_TIMER=y
CONFIG_NSPIRE_TIMER=y
# CONFIG_INTEGRATOR_AP_TIMER is not set
# CONFIG_CLKSRC_PISTACHIO is not set
# CONFIG_ARMV7M_SYSTICK is not set
# CONFIG_ATMEL_PIT is not set
# CONFIG_ATMEL_ST is not set
CONFIG_CLKSRC_SAMSUNG_PWM=y
# CONFIG_FSL_FTM_TIMER is not set
# CONFIG_OXNAS_RPS_TIMER is not set
# CONFIG_MTK_TIMER is not set
CONFIG_SPRD_TIMER=y
CONFIG_CLKSRC_JCORE_PIT=y
CONFIG_SH_TIMER_CMT=y
# CONFIG_SH_TIMER_MTU2 is not set
CONFIG_RENESAS_OSTM=y
# CONFIG_SH_TIMER_TMU is not set
CONFIG_EM_TIMER_STI=y
# CONFIG_CLKSRC_PXA is not set
# CONFIG_H8300_TMR8 is not set
# CONFIG_H8300_TMR16 is not set
CONFIG_H8300_TPU=y
# CONFIG_TIMER_IMX_SYS_CTR is not set
# CONFIG_CLKSRC_ST_LPC is not set
CONFIG_ATCPIT100_TIMER=y
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers
CONFIG_MAILBOX=y
# CONFIG_IMX_MBOX is not set
# CONFIG_PLATFORM_MHU is not set
# CONFIG_ARMADA_37XX_RWTM_MBOX is not set
CONFIG_ROCKCHIP_MBOX=y
CONFIG_ALTERA_MBOX=m
CONFIG_HI3660_MBOX=m
# CONFIG_HI6220_MBOX is not set
CONFIG_MAILBOX_TEST=y
CONFIG_QCOM_APCS_IPC=y
# CONFIG_BCM_PDC_MBOX is not set
CONFIG_MTK_CMDQ_MBOX=y
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_QCOM_GLINK_NATIVE=m
CONFIG_RPMSG_QCOM_GLINK_RPM=m
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
CONFIG_MESON_CANVAS=y
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers
#
# Aspeed SoC drivers
#
CONFIG_SOC_ASPEED=y
CONFIG_ASPEED_LPC_CTRL=y
CONFIG_ASPEED_LPC_SNOOP=y
CONFIG_ASPEED_P2A_CTRL=y
# end of Aspeed SoC drivers
# CONFIG_AT91_SOC_ID is not set
CONFIG_AT91_SOC_SFR=y
#
# Broadcom SoC drivers
#
CONFIG_BCM2835_POWER=y
CONFIG_SOC_BRCMSTB=y
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
CONFIG_FSL_MC_DPIO=y
# CONFIG_DPAA2_CONSOLE is not set
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# CONFIG_IMX_SCU_SOC is not set
# end of i.MX SoC drivers
#
# IXP4xx SoC drivers
#
CONFIG_IXP4XX_QMGR=y
CONFIG_IXP4XX_NPE=y
# end of IXP4xx SoC drivers
#
# MediaTek SoC drivers
#
CONFIG_MTK_CMDQ=m
CONFIG_MTK_INFRACFG=y
# CONFIG_MTK_PMIC_WRAP is not set
CONFIG_MTK_SCPSYS=y
# end of MediaTek SoC drivers
#
# Qualcomm SoC drivers
#
CONFIG_QCOM_COMMAND_DB=y
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
CONFIG_QCOM_LLCC=m
CONFIG_QCOM_RPMH=y
CONFIG_QCOM_RPMHPD=y
CONFIG_QCOM_SMD_RPM=m
CONFIG_QCOM_WCNSS_CTRL=y
CONFIG_QCOM_APR=y
# end of Qualcomm SoC drivers
CONFIG_SOC_RENESAS=y
CONFIG_SYSC_R8A7743=y
# CONFIG_SYSC_R8A7745 is not set
CONFIG_SYSC_R8A77470=y
CONFIG_SYSC_R8A774A1=y
CONFIG_SYSC_R8A774B1=y
CONFIG_SYSC_R8A774C0=y
CONFIG_SYSC_R8A7779=y
# CONFIG_SYSC_R8A7790 is not set
# CONFIG_SYSC_R8A7791 is not set
CONFIG_SYSC_R8A7792=y
CONFIG_SYSC_R8A7794=y
# CONFIG_SYSC_R8A7795 is not set
# CONFIG_SYSC_R8A77960 is not set
# CONFIG_SYSC_R8A77961 is not set
CONFIG_SYSC_R8A77965=y
CONFIG_SYSC_R8A77970=y
CONFIG_SYSC_R8A77980=y
# CONFIG_SYSC_R8A77990 is not set
# CONFIG_SYSC_R8A77995 is not set
# CONFIG_RST_RCAR is not set
CONFIG_SYSC_RCAR=y
CONFIG_SYSC_RMOBILE=y
CONFIG_ROCKCHIP_GRF=y
CONFIG_SOC_SAMSUNG=y
# CONFIG_EXYNOS_ASV is not set
CONFIG_EXYNOS_CHIPID=y
CONFIG_EXYNOS_PM_DOMAINS=y
# CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set
CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER=y
# CONFIG_SOC_TI is not set
# CONFIG_UX500_SOC_ID is not set
#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
# end of Xilinx SoC drivers
CONFIG_SOC_ZTE=y
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=m
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#
CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y
CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=y
CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=m
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_MAX3355=m
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
CONFIG_EXTCON_USB_GPIO=m
CONFIG_MEMORY=y
CONFIG_DDR=y
CONFIG_FSL_IFC=y
# CONFIG_JZ4780_NEMC is not set
CONFIG_SAMSUNG_MC=y
CONFIG_EXYNOS5422_DMC=y
CONFIG_EXYNOS_SROM=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=m
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
# CONFIG_IIO_SW_DEVICE is not set
# CONFIG_IIO_SW_TRIGGER is not set
#
# Accelerometers
#
CONFIG_BMA400=y
# CONFIG_BMC150_ACCEL is not set
CONFIG_HID_SENSOR_ACCEL_3D=m
# CONFIG_KXSD9 is not set
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD7606=m
CONFIG_AD7606_IFACE_PARALLEL=m
CONFIG_AT91_SAMA5D2_ADC=y
CONFIG_BCM_IPROC_ADC=m
# CONFIG_ENVELOPE_DETECTOR is not set
# CONFIG_EXYNOS_ADC is not set
# CONFIG_MXS_LRADC_ADC is not set
CONFIG_FSL_MX25_ADC=m
CONFIG_HX711=m
CONFIG_INGENIC_ADC=m
CONFIG_IMX7D_ADC=m
CONFIG_LPC18XX_ADC=m
# CONFIG_LPC32XX_ADC is not set
CONFIG_MEDIATEK_MT6577_AUXADC=y
CONFIG_MEN_Z188_ADC=m
CONFIG_NPCM_ADC=m
CONFIG_QCOM_VADC_COMMON=m
CONFIG_QCOM_PM8XXX_XOADC=m
CONFIG_QCOM_SPMI_IADC=m
CONFIG_QCOM_SPMI_VADC=m
CONFIG_QCOM_SPMI_ADC5=m
CONFIG_RCAR_GYRO_ADC=m
# CONFIG_SC27XX_ADC is not set
# CONFIG_SPEAR_ADC is not set
CONFIG_SD_ADC_MODULATOR=m
# CONFIG_STM32_ADC_CORE is not set
CONFIG_STM32_DFSDM_CORE=m
CONFIG_STM32_DFSDM_ADC=m
# CONFIG_STX104 is not set
CONFIG_SUN4I_GPADC=y
CONFIG_TI_AM335X_ADC=m
# CONFIG_VF610_ADC is not set
# CONFIG_VIPERBOARD_ADC is not set
# CONFIG_XILINX_XADC is not set
# end of Analog to digital converters
#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=m
# end of Analog Front Ends
#
# Amplifiers
#
# end of Amplifiers
#
# Chemical Sensors
#
# end of Chemical Sensors
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
# end of Hid Sensor IIO Common
#
# SSP Sensor Common
#
# end of SSP Sensor Common
#
# Digital to analog converters
#
CONFIG_CIO_DAC=m
# CONFIG_DPOT_DAC is not set
# CONFIG_LPC18XX_DAC is not set
# CONFIG_STM32_DAC is not set
CONFIG_VF610_DAC=m
# end of Digital to analog converters
#
# IIO dummy driver
#
# end of IIO dummy driver
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#
CONFIG_HID_SENSOR_GYRO_3D=m
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#
# end of Heart Rate Monitors
# end of Health Sensors
#
# Humidity sensors
#
CONFIG_DHT11=m
# CONFIG_HID_SENSOR_HUMIDITY is not set
# end of Humidity sensors
#
# Inertial measurement units
#
# end of Inertial measurement units
#
# Light sensors
#
CONFIG_CM3605=y
CONFIG_HID_SENSOR_ALS=m
CONFIG_HID_SENSOR_PROX=m
# end of Light sensors
#
# Magnetometer sensors
#
# CONFIG_HID_SENSOR_MAGNETOMETER_3D is not set
# end of Magnetometer sensors
#
# Multiplexers
#
CONFIG_IIO_MUX=m
# end of Multiplexers
#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=m
CONFIG_HID_SENSOR_DEVICE_ROTATION=m
# end of Inclinometer sensors
#
# Triggers - standalone
#
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
CONFIG_IIO_STM32_LPTIMER_TRIGGER=y
# CONFIG_IIO_STM32_TIMER_TRIGGER is not set
CONFIG_IIO_SYSFS_TRIGGER=y
# end of Triggers - standalone
#
# Digital potentiometers
#
# end of Digital potentiometers
#
# Digital potentiostats
#
# end of Digital potentiostats
#
# Pressure sensors
#
CONFIG_HID_SENSOR_PRESS=m
CONFIG_MS5611=m
CONFIG_ZPA2326=y
# end of Pressure sensors
#
# Lightning sensors
#
# end of Lightning sensors
#
# Proximity and distance sensors
#
CONFIG_PING=y
CONFIG_SRF04=y
# end of Proximity and distance sensors
#
# Resolver to digital converters
#
# end of Resolver to digital converters
#
# Temperature sensors
#
# CONFIG_HID_SENSOR_TEMP is not set
# end of Temperature sensors
# CONFIG_PWM is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
CONFIG_MADERA_IRQ=m
# CONFIG_JCORE_AIC is not set
CONFIG_RENESAS_INTC_IRQPIN=y
# CONFIG_RENESAS_IRQC is not set
CONFIG_RENESAS_RZA1_IRQC=y
CONFIG_TS4800_IRQ=m
CONFIG_INGENIC_TCU_IRQ=y
# CONFIG_RENESAS_H8S_INTC is not set
CONFIG_IRQ_UNIPHIER_AIDET=y
CONFIG_IMX_IRQSTEER=y
CONFIG_EXYNOS_IRQ_COMBINER=y
# end of IRQ chip support
CONFIG_IPACK_BUS=m
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_ATH79 is not set
CONFIG_RESET_AXS10X=y
CONFIG_RESET_BERLIN=y
CONFIG_RESET_BRCMSTB=y
# CONFIG_RESET_BRCMSTB_RESCAL is not set
# CONFIG_RESET_HSDK is not set
CONFIG_RESET_IMX7=y
# CONFIG_RESET_INTEL_GW is not set
CONFIG_RESET_LANTIQ=y
CONFIG_RESET_LPC18XX=y
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_MESON_AUDIO_ARB is not set
CONFIG_RESET_NPCM=y
# CONFIG_RESET_PISTACHIO is not set
CONFIG_RESET_QCOM_AOSS=y
CONFIG_RESET_QCOM_PDC=m
CONFIG_RESET_SCMI=y
CONFIG_RESET_SIMPLE=y
CONFIG_RESET_STM32MP157=y
CONFIG_RESET_SOCFPGA=y
# CONFIG_RESET_SUNXI is not set
CONFIG_RESET_TI_SYSCON=m
CONFIG_RESET_UNIPHIER=m
# CONFIG_RESET_UNIPHIER_GLUE is not set
CONFIG_RESET_ZYNQ=y
CONFIG_COMMON_RESET_HI3660=y
# CONFIG_COMMON_RESET_HI6220 is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_PHY_LPC18XX_USB_OTG=m
CONFIG_PHY_XGENE=y
# CONFIG_PHY_SUN4I_USB is not set
# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
# CONFIG_PHY_SUN9I_USB is not set
CONFIG_PHY_SUN50I_USB3=y
# CONFIG_PHY_MESON8B_USB2 is not set
CONFIG_PHY_MESON_GXL_USB2=m
CONFIG_PHY_MESON_GXL_USB3=m
# CONFIG_PHY_MESON_G12A_USB2 is not set
# CONFIG_PHY_MESON_G12A_USB3_PCIE is not set
# CONFIG_PHY_CYGNUS_PCIE is not set
# CONFIG_PHY_BCM_SR_USB is not set
CONFIG_BCM_KONA_USB2_PHY=m
CONFIG_PHY_BCM_NS_USB2=m
CONFIG_PHY_NS2_USB_DRD=m
# CONFIG_PHY_BRCM_SATA is not set
CONFIG_PHY_BRCM_USB=y
CONFIG_PHY_BCM_SR_PCIE=y
CONFIG_PHY_CADENCE_DP=m
CONFIG_PHY_CADENCE_DPHY=y
CONFIG_PHY_CADENCE_SIERRA=m
CONFIG_PHY_FSL_IMX8MQ_USB=y
CONFIG_PHY_MIXEL_MIPI_DPHY=y
CONFIG_PHY_HI6220_USB=m
CONFIG_PHY_HI3660_USB=y
# CONFIG_PHY_HISTB_COMBPHY is not set
CONFIG_PHY_HISI_INNO_USB2=y
# CONFIG_PHY_LANTIQ_VRX200_PCIE is not set
CONFIG_PHY_LANTIQ_RCU_USB2=y
CONFIG_ARMADA375_USBCLUSTER_PHY=y
CONFIG_PHY_BERLIN_SATA=m
CONFIG_PHY_BERLIN_USB=m
CONFIG_PHY_MVEBU_A3700_UTMI=y
CONFIG_PHY_MVEBU_A38X_COMPHY=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
CONFIG_PHY_PXA_28NM_USB2=m
CONFIG_PHY_PXA_USB=y
CONFIG_PHY_MMP3_USB=y
CONFIG_PHY_MTK_TPHY=m
# CONFIG_PHY_MTK_UFS is not set
# CONFIG_PHY_MTK_XSPHY is not set
# CONFIG_PHY_CPCAP_USB is not set
CONFIG_PHY_MAPPHONE_MDM6600=y
# CONFIG_PHY_OCELOT_SERDES is not set
# CONFIG_PHY_ATH79_USB is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
CONFIG_PHY_QCOM_USB_HS=y
CONFIG_PHY_QCOM_USB_HSIC=y
# CONFIG_PHY_RALINK_USB is not set
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=m
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
CONFIG_PHY_EXYNOS_DP_VIDEO=m
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
CONFIG_PHY_EXYNOS_PCIE=y
# CONFIG_PHY_SAMSUNG_USB2 is not set
CONFIG_PHY_UNIPHIER_USB2=y
# CONFIG_PHY_UNIPHIER_USB3 is not set
CONFIG_PHY_UNIPHIER_PCIE=y
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
CONFIG_PHY_STIH407_USB=m
# CONFIG_PHY_STM32_USBPHYC is not set
# CONFIG_PHY_TEGRA194_P2U is not set
CONFIG_PHY_DA8XX_USB=y
CONFIG_PHY_DM816X_USB=y
CONFIG_OMAP_CONTROL_PHY=m
# CONFIG_TI_PIPE3 is not set
CONFIG_PHY_TUSB1210=m
CONFIG_PHY_TI_GMII_SEL=m
CONFIG_PHY_INTEL_EMMC=m
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
CONFIG_MCB=y
CONFIG_MCB_LPC=m
#
# Performance monitor support
#
# end of Performance monitor support
# CONFIG_RAS is not set
#
# Android
#
# CONFIG_ANDROID is not set
# end of Android
CONFIG_DAX=y
CONFIG_NVMEM=y
# CONFIG_NVMEM_SYSFS is not set
CONFIG_NVMEM_IMX_IIM=m
CONFIG_NVMEM_IMX_OCOTP=m
# CONFIG_NVMEM_LPC18XX_EEPROM is not set
# CONFIG_NVMEM_LPC18XX_OTP is not set
CONFIG_NVMEM_MXS_OCOTP=m
CONFIG_MTK_EFUSE=y
# CONFIG_QCOM_QFPROM is not set
# CONFIG_NVMEM_SPMI_SDAM is not set
# CONFIG_ROCKCHIP_EFUSE is not set
CONFIG_ROCKCHIP_OTP=m
# CONFIG_NVMEM_BCM_OCOTP is not set
CONFIG_NVMEM_STM32_ROMEM=m
# CONFIG_UNIPHIER_EFUSE is not set
CONFIG_NVMEM_VF610_OCOTP=m
CONFIG_MESON_MX_EFUSE=m
CONFIG_NVMEM_SNVS_LPGPR=m
CONFIG_SC27XX_EFUSE=y
# CONFIG_SPRD_EFUSE is not set
#
# HW tracing support
#
CONFIG_STM=y
CONFIG_STM_PROTO_BASIC=y
CONFIG_STM_PROTO_SYS_T=y
# CONFIG_STM_DUMMY is not set
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=y
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_GTH=m
# CONFIG_INTEL_TH_STH is not set
# CONFIG_INTEL_TH_MSU is not set
CONFIG_INTEL_TH_PTI=m
CONFIG_INTEL_TH_DEBUG=y
# end of HW tracing support
# CONFIG_FPGA is not set
CONFIG_FSI=y
CONFIG_FSI_NEW_DEV_NODE=y
CONFIG_FSI_MASTER_GPIO=y
# CONFIG_FSI_MASTER_HUB is not set
CONFIG_FSI_MASTER_AST_CF=m
CONFIG_FSI_MASTER_ASPEED=y
CONFIG_FSI_SCOM=y
CONFIG_FSI_SBEFIFO=m
CONFIG_FSI_OCC=m
# CONFIG_TEE is not set
CONFIG_MULTIPLEXER=m
#
# Multiplexer drivers
#
# CONFIG_MUX_GPIO is not set
# CONFIG_MUX_MMIO is not set
# end of Multiplexer drivers
CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
CONFIG_SLIMBUS=m
CONFIG_SLIM_QCOM_CTRL=m
CONFIG_INTERCONNECT=y
CONFIG_COUNTER=m
# CONFIG_104_QUAD_8 is not set
CONFIG_STM32_TIMER_CNT=m
# CONFIG_STM32_LPTIMER_CNT is not set
CONFIG_TI_EQEP=m
CONFIG_FTM_QUADDEC=m
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_EXT4_KUNIT_TESTS=m
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=m
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
# CONFIG_F2FS_FS_XATTR is not set
# CONFIG_F2FS_CHECK_FS is not set
CONFIG_F2FS_FAULT_INJECTION=y
# CONFIG_F2FS_FS_COMPRESSION is not set
CONFIG_FS_DAX=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
# CONFIG_MANDATORY_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_VIRTIO_FS=m
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
# end of DOS/FAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_PROC_CPU_RESCTRL=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_WRITEBUFFER is not set
CONFIG_JFFS2_SUMMARY=y
# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
# CONFIG_JFFS2_RTIME is not set
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_FS_ZSTD=y
CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBIFS_FS_SECURITY is not set
CONFIG_UBIFS_FS_AUTHENTICATION=y
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
CONFIG_SQUASHFS_XATTR=y
# CONFIG_SQUASHFS_ZLIB is not set
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
# CONFIG_MINIX_FS is not set
CONFIG_OMFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=y
CONFIG_QNX6FS_FS=m
# CONFIG_QNX6FS_DEBUG is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFLATE_COMPRESS=y
CONFIG_PSTORE_LZO_COMPRESS=y
CONFIG_PSTORE_LZ4_COMPRESS=m
CONFIG_PSTORE_LZ4HC_COMPRESS=y
CONFIG_PSTORE_842_COMPRESS=y
CONFIG_PSTORE_ZSTD_COMPRESS=y
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
# CONFIG_PSTORE_LZO_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_842_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_ZSTD_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
CONFIG_PSTORE_PMSG=y
# CONFIG_PSTORE_RAM is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
CONFIG_UFS_DEBUG=y
# CONFIG_EROFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
CONFIG_NLS_CODEPAGE_864=m
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=m
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=m
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=y
# CONFIG_NLS_MAC_ICELAND is not set
CONFIG_NLS_MAC_INUIT=y
# CONFIG_NLS_MAC_ROMANIAN is not set
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_UNICODE=y
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_ENCRYPTED_KEYS=m
# CONFIG_KEY_DH_OPERATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITYFS=y
CONFIG_PAGE_TABLE_ISOLATION=y
# CONFIG_FORTIFY_SOURCE is not set
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
# end of Memory initialization
# end of Kernel hardening options
# end of Security options
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
CONFIG_CRYPTO_ENGINE=y
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECC=y
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_ECRDSA=y
# CONFIG_CRYPTO_CURVE25519 is not set
CONFIG_CRYPTO_CURVE25519_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_AEGIS128=m
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_OFB=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_NHPOLY1305=y
CONFIG_CRYPTO_NHPOLY1305_SSE2=y
CONFIG_CRYPTO_NHPOLY1305_AVX2=m
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_ESSIV=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_XXHASH=m
CONFIG_CRYPTO_BLAKE2B=m
CONFIG_CRYPTO_BLAKE2S=m
# CONFIG_CRYPTO_BLAKE2S_X86 is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_RMD128=m
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
CONFIG_CRYPTO_SHA512_SSSE3=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
CONFIG_CRYPTO_AES_NI_INTEL=m
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST5_AVX_X86_64=y
CONFIG_CRYPTO_CAST6=m
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_DES3_EDE_X86_64=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CHACHA20_X86_64=m
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX_X86_64=y
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
CONFIG_CRYPTO_SM4=y
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_HASH_INFO=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=m
# CONFIG_CRYPTO_LIB_BLAKE2S is not set
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_ALLWINNER is not set
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_EXYNOS_RNG=y
CONFIG_CRYPTO_DEV_S5P=y
# CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is not set
CONFIG_CRYPTO_DEV_ATMEL_AES=m
# CONFIG_CRYPTO_DEV_ATMEL_TDES is not set
CONFIG_CRYPTO_DEV_ATMEL_SHA=m
# CONFIG_CRYPTO_DEV_QCE is not set
CONFIG_CRYPTO_DEV_QCOM_RNG=y
CONFIG_CRYPTO_DEV_IMGTEC_HASH=m
# CONFIG_CRYPTO_DEV_MEDIATEK is not set
CONFIG_CRYPTO_DEV_VIRTIO=y
CONFIG_CRYPTO_DEV_SAFEXCEL=m
CONFIG_CRYPTO_DEV_CCREE=y
# CONFIG_CRYPTO_DEV_HISI_SEC is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=m
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking
#
# Library routines
#
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CORDIC=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_STMP_DEVICE=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
CONFIG_CRC32_SARWATE=y
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_XXHASH=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=m
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y
CONFIG_SWIOTLB=y
CONFIG_DMA_CMA=y
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_PERCENTAGE=0
# CONFIG_CMA_SIZE_SEL_MBYTES is not set
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
CONFIG_CMA_SIZE_SEL_MAX=y
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=m
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_SBITMAP=y
# CONFIG_PARMAN is not set
CONFIG_OBJAGG=m
CONFIG_STRING_SELFTEST=m
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_PRINTK_CALLER is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_DEBUG_SYNCHRO_TEST=m
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_SYMBOLIC_ERRNAME=y
# end of printk and dmesg options
#
# Compile-time checks and compiler options
#
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_READABLE_ASM=y
CONFIG_HEADERS_INSTALL=y
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
CONFIG_FRAME_POINTER=y
# CONFIG_STACK_VALIDATION is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x1
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_UBSAN_ALIGNMENT=y
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_KCSAN=y
# CONFIG_KCSAN_DEBUG is not set
CONFIG_KCSAN_SELFTEST=y
CONFIG_KCSAN_EARLY_ENABLE=y
CONFIG_KCSAN_NUM_WATCHPOINTS=64
CONFIG_KCSAN_UDELAY_TASK=80
CONFIG_KCSAN_UDELAY_INTERRUPT=20
CONFIG_KCSAN_DELAY_RANDOMIZE=y
CONFIG_KCSAN_SKIP_WATCH=4000
# CONFIG_KCSAN_SKIP_WATCH_RANDOMIZE is not set
CONFIG_KCSAN_REPORT_ONCE_IN_MS=3000
CONFIG_KCSAN_REPORT_RACE_UNKNOWN_ORIGIN=y
CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY=y
# CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC is not set
# CONFIG_KCSAN_IGNORE_ATOMICS is not set
# end of Generic Kernel Debugging Instruments
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
# CONFIG_DEBUG_KMEMLEAK_TEST is not set
# CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF is not set
CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
CONFIG_DEBUG_VM_RB=y
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_KASAN_STACK=1
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_WQ_WATCHDOG=y
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
CONFIG_DEBUG_TIMEKEEPING=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=m
CONFIG_WW_MUTEX_SELFTEST=m
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
CONFIG_DEBUG_KOBJECT=y
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
CONFIG_RCU_PERF_TEST=y
CONFIG_RCU_TORTURE_TEST=y
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
CONFIG_DEBUG_BLOCK_EXT_DEVT=y
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
#
# x86 Debugging
#
# CONFIG_DEBUG_AID_FOR_SYZBOT is not set
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_WX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
CONFIG_IO_DELAY_UDELAY=y
# CONFIG_IO_DELAY_NONE is not set
# CONFIG_DEBUG_BOOT_PARAMS is not set
CONFIG_CPA_DEBUG=y
CONFIG_DEBUG_ENTRY=y
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_UNWINDER_ORC is not set
CONFIG_UNWINDER_FRAME_POINTER=y
# CONFIG_UNWINDER_GUESS is not set
# end of x86 Debugging
#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=m
# CONFIG_KUNIT_TEST is not set
CONFIG_KUNIT_EXAMPLE_TEST=m
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=m
CONFIG_TEST_LIST_SORT=m
CONFIG_TEST_SORT=y
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=m
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_TEST_HEXDUMP=y
CONFIG_TEST_STRING_HELPERS=y
# CONFIG_TEST_STRSCPY is not set
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=m
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_BITFIELD is not set
CONFIG_TEST_UUID=m
CONFIG_TEST_XARRAY=y
CONFIG_TEST_OVERFLOW=y
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
CONFIG_TEST_IDA=m
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_VMALLOC is not set
CONFIG_TEST_USER_COPY=m
CONFIG_FIND_BIT_BENCHMARK=m
CONFIG_TEST_FIRMWARE=y
CONFIG_TEST_SYSCTL=m
CONFIG_SYSCTL_KUNIT_TEST=m
# CONFIG_LIST_KUNIT_TEST is not set
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_MEMCAT_P=y
CONFIG_TEST_OBJAGG=m
CONFIG_TEST_STACKINIT=m
CONFIG_TEST_MEMINIT=m
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
# end of Kernel hacking
# CONFIG_WARN_MISSING_DOCUMENTS is not set
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: mmotm 2020-02-13-22-26 uploaded (mm/hugetlb.c)
2020-02-14 16:29 ` mmotm 2020-02-13-22-26 uploaded (mm/hugetlb.c) Randy Dunlap
@ 2020-02-14 17:18 ` Mike Kravetz
2020-02-14 20:51 ` Mina Almasry
[not found] ` <20200214204544.231482-1-almasrymina@google.com>
0 siblings, 2 replies; 95+ messages in thread
From: Mike Kravetz @ 2020-02-14 17:18 UTC (permalink / raw)
To: Randy Dunlap, Andrew Morton, broonie, linux-fsdevel,
linux-kernel, linux-mm, linux-next, mhocko, mm-commits, sfr,
Matthew Wilcox, Mina Almasry
+ Mina
Andrew, you might want to remove those hugetlb cgroup patches from mmotm
as they are not yet fully reviewed and have some build issues.
--
Mike Kravetz
On 2/14/20 8:29 AM, Randy Dunlap wrote:
> On 2/13/20 10:26 PM, Andrew Morton wrote:
>> The mm-of-the-moment snapshot 2020-02-13-22-26 has been uploaded to
>>
>> http://www.ozlabs.org/~akpm/mmotm/
>>
>> mmotm-readme.txt says
>>
>> README for mm-of-the-moment:
>>
>> http://www.ozlabs.org/~akpm/mmotm/
>>
>> This is a snapshot of my -mm patch queue. Uploaded at random hopefully
>> more than once a week.
>>
>
> on x86_64:
>
> CC mm/hugetlb.o
> In file included from ../include/linux/kernel.h:15:0,
> from ../include/linux/list.h:9,
> from ../mm/hugetlb.c:6:
> ../mm/hugetlb.c: In function ‘dump_resv_map’:
> ../mm/hugetlb.c:301:30: error: ‘struct file_region’ has no member named ‘reservation_counter’
> rg->from, rg->to, rg->reservation_counter, rg->css);
> ^
> ../include/linux/printk.h:304:33: note: in definition of macro ‘pr_err’
> printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
> ^~~~~~~~~~~
> ../mm/hugetlb.c:301:55: error: ‘struct file_region’ has no member named ‘css’
> rg->from, rg->to, rg->reservation_counter, rg->css);
> ^
> ../include/linux/printk.h:304:33: note: in definition of macro ‘pr_err’
> printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
> ^~~~~~~~~~~
> ../mm/hugetlb.c: In function ‘check_coalesce_bug’:
> ../mm/hugetlb.c:320:10: error: ‘struct file_region’ has no member named ‘reservation_counter’
> if (nrg->reservation_counter && nrg->from == rg->to &&
> ^~
> ../mm/hugetlb.c:321:10: error: ‘struct file_region’ has no member named ‘reservation_counter’
> nrg->reservation_counter == rg->reservation_counter &&
> ^~
> ../mm/hugetlb.c:321:37: error: ‘struct file_region’ has no member named ‘reservation_counter’
> nrg->reservation_counter == rg->reservation_counter &&
> ^~
> ../mm/hugetlb.c:322:10: error: ‘struct file_region’ has no member named ‘css’
> nrg->css == rg->css) {
> ^~
> ../mm/hugetlb.c:322:21: error: ‘struct file_region’ has no member named ‘css’
> nrg->css == rg->css) {
> ^~
>
>
> Full randconfig file is attached.
>
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: mmotm 2020-02-13-22-26 uploaded (mm/hugetlb.c)
2020-02-14 17:18 ` Mike Kravetz
@ 2020-02-14 20:51 ` Mina Almasry
[not found] ` <20200214204544.231482-1-almasrymina@google.com>
1 sibling, 0 replies; 95+ messages in thread
From: Mina Almasry @ 2020-02-14 20:51 UTC (permalink / raw)
To: Mike Kravetz
Cc: Randy Dunlap, Andrew Morton, broonie,
open list:FILESYSTEMS (VFS and infrastructure),
open list, linux-mm, linux-next, mhocko, mm-commits, sfr,
Matthew Wilcox
On Fri, Feb 14, 2020 at 9:18 AM Mike Kravetz <mike.kravetz@oracle.com> wrote:
>
> + Mina
>
> Andrew, you might want to remove those hugetlb cgroup patches from mmotm
> as they are not yet fully reviewed and have some build issues.
>
> --
> Mike Kravetz
Up to you guys but I just sent you a patch ("hugetlb: fix
CONFIG_CGROUP_HUGETLB ifdefs") that should fix this build issue.
>
> On 2/14/20 8:29 AM, Randy Dunlap wrote:
> > On 2/13/20 10:26 PM, Andrew Morton wrote:
> >> The mm-of-the-moment snapshot 2020-02-13-22-26 has been uploaded to
> >>
> >> http://www.ozlabs.org/~akpm/mmotm/
> >>
> >> mmotm-readme.txt says
> >>
> >> README for mm-of-the-moment:
> >>
> >> http://www.ozlabs.org/~akpm/mmotm/
> >>
> >> This is a snapshot of my -mm patch queue. Uploaded at random hopefully
> >> more than once a week.
> >>
> >
> > on x86_64:
> >
> > CC mm/hugetlb.o
> > In file included from ../include/linux/kernel.h:15:0,
> > from ../include/linux/list.h:9,
> > from ../mm/hugetlb.c:6:
> > ../mm/hugetlb.c: In function ‘dump_resv_map’:
> > ../mm/hugetlb.c:301:30: error: ‘struct file_region’ has no member named ‘reservation_counter’
> > rg->from, rg->to, rg->reservation_counter, rg->css);
> > ^
> > ../include/linux/printk.h:304:33: note: in definition of macro ‘pr_err’
> > printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
> > ^~~~~~~~~~~
> > ../mm/hugetlb.c:301:55: error: ‘struct file_region’ has no member named ‘css’
> > rg->from, rg->to, rg->reservation_counter, rg->css);
> > ^
> > ../include/linux/printk.h:304:33: note: in definition of macro ‘pr_err’
> > printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
> > ^~~~~~~~~~~
> > ../mm/hugetlb.c: In function ‘check_coalesce_bug’:
> > ../mm/hugetlb.c:320:10: error: ‘struct file_region’ has no member named ‘reservation_counter’
> > if (nrg->reservation_counter && nrg->from == rg->to &&
> > ^~
> > ../mm/hugetlb.c:321:10: error: ‘struct file_region’ has no member named ‘reservation_counter’
> > nrg->reservation_counter == rg->reservation_counter &&
> > ^~
> > ../mm/hugetlb.c:321:37: error: ‘struct file_region’ has no member named ‘reservation_counter’
> > nrg->reservation_counter == rg->reservation_counter &&
> > ^~
> > ../mm/hugetlb.c:322:10: error: ‘struct file_region’ has no member named ‘css’
> > nrg->css == rg->css) {
> > ^~
> > ../mm/hugetlb.c:322:21: error: ‘struct file_region’ has no member named ‘css’
> > nrg->css == rg->css) {
> > ^~
> >
> >
> > Full randconfig file is attached.
> >
^ permalink raw reply [flat|nested] 95+ messages in thread[parent not found: <20200214204544.231482-1-almasrymina@google.com>]
* Re: [PATCH] hugetlb: fix CONFIG_CGROUP_HUGETLB ifdefs
[not found] ` <20200214204544.231482-1-almasrymina@google.com>
@ 2020-02-14 21:00 ` Mina Almasry
2020-02-15 1:17 ` Randy Dunlap
0 siblings, 1 reply; 95+ messages in thread
From: Mina Almasry @ 2020-02-14 21:00 UTC (permalink / raw)
To: linux-mm, linux-next, open list
Cc: David Rientjes, Greg Thelen, Mike Kravetz, Shakeel Butt, Andrew Morton
On Fri, Feb 14, 2020 at 12:46 PM Mina Almasry <almasrymina@google.com> wrote:
>
> Fixes an #ifdef bug in the patch referred to below that was
> causing a build error when CONFIG_DEBUG_VM &&
> !CONFIG_CCGROUP_HUGETLB.
>
> Fixes: b5f16a533ce8a ("hugetlb: support file_region coalescing again")
> Signed-off-by: Mina Almasry <almasrymina@google.com>
> Cc: David Rientjes <rientjes@google.com>
> Cc: Greg Thelen <gthelen@google.com>
> Cc: Mike Kravetz <mike.kravetz@oracle.com>
> Cc: Shakeel Butt <shakeelb@google.com>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> ---
> mm/hugetlb.c | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/mm/hugetlb.c b/mm/hugetlb.c
> index ee6d262fe6ac0..95d34c58981d2 100644
> --- a/mm/hugetlb.c
> +++ b/mm/hugetlb.c
> @@ -289,7 +289,7 @@ static bool has_same_uncharge_info(struct file_region *rg,
> #endif
> }
>
> -#ifdef CONFIG_DEBUG_VM
> +#if defined(CONFIG_DEBUG_VM) && defined(CONFIG_CGROUP_HUGETLB)
> static void dump_resv_map(struct resv_map *resv)
> {
> struct list_head *head = &resv->regions;
> @@ -325,6 +325,10 @@ static void check_coalesce_bug(struct resv_map *resv)
> }
> }
> }
> +#else
> +static void check_coalesce_bug(struct resv_map *resv)
> +{
> +}
> #endif
>
> static void coalesce_file_region(struct resv_map *resv, struct file_region *rg)
> @@ -431,9 +435,7 @@ static long add_reservation_in_range(struct resv_map *resv, long f, long t,
> }
>
> VM_BUG_ON(add < 0);
> -#ifdef CONFIG_DEBUG_VM
> check_coalesce_bug(resv);
> -#endif
> return add;
> }
>
> --
> 2.25.0.265.gbab2e86ba0-goog
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: [PATCH] hugetlb: fix CONFIG_CGROUP_HUGETLB ifdefs
2020-02-14 21:00 ` [PATCH] hugetlb: fix CONFIG_CGROUP_HUGETLB ifdefs Mina Almasry
@ 2020-02-15 1:17 ` Randy Dunlap
2020-02-15 1:56 ` Randy Dunlap
0 siblings, 1 reply; 95+ messages in thread
From: Randy Dunlap @ 2020-02-15 1:17 UTC (permalink / raw)
To: Mina Almasry, linux-mm, linux-next, open list
Cc: David Rientjes, Greg Thelen, Mike Kravetz, Shakeel Butt, Andrew Morton
On 2/14/20 1:00 PM, Mina Almasry wrote:
> On Fri, Feb 14, 2020 at 12:46 PM Mina Almasry <almasrymina@google.com> wrote:
>>
>> Fixes an #ifdef bug in the patch referred to below that was
>> causing a build error when CONFIG_DEBUG_VM &&
>> !CONFIG_CCGROUP_HUGETLB.
Hi Mina,
I don't know if this was supposed to fix the 2 build reports that I made,
but this does not apply cleanly to mmotm (and it's a reply email so it's
more difficult to apply anyway):
Applying patch mm-hugetlb-fix-CONFIG_CGROUP_HUGETLB.patch
patching file mm/hugetlb.c
Hunk #1 succeeded at 289 with fuzz 1.
Hunk #2 succeeded at 325 with fuzz 2.
Hunk #3 FAILED at 435.
1 out of 3 hunks FAILED -- rejects in file mm/hugetlb.c
>> Fixes: b5f16a533ce8a ("hugetlb: support file_region coalescing again")
>> Signed-off-by: Mina Almasry <almasrymina@google.com>
>> Cc: David Rientjes <rientjes@google.com>
>> Cc: Greg Thelen <gthelen@google.com>
>> Cc: Mike Kravetz <mike.kravetz@oracle.com>
>> Cc: Shakeel Butt <shakeelb@google.com>
>> Cc: Andrew Morton <akpm@linux-foundation.org>
>> ---
>> mm/hugetlb.c | 8 +++++---
>> 1 file changed, 5 insertions(+), 3 deletions(-)
>>
>> diff --git a/mm/hugetlb.c b/mm/hugetlb.c
>> index ee6d262fe6ac0..95d34c58981d2 100644
>> --- a/mm/hugetlb.c
>> +++ b/mm/hugetlb.c
>> @@ -289,7 +289,7 @@ static bool has_same_uncharge_info(struct file_region *rg,
>> #endif
>> }
>>
>> -#ifdef CONFIG_DEBUG_VM
>> +#if defined(CONFIG_DEBUG_VM) && defined(CONFIG_CGROUP_HUGETLB)
>> static void dump_resv_map(struct resv_map *resv)
>> {
>> struct list_head *head = &resv->regions;
>> @@ -325,6 +325,10 @@ static void check_coalesce_bug(struct resv_map *resv)
>> }
>> }
>> }
>> +#else
>> +static void check_coalesce_bug(struct resv_map *resv)
>> +{
>> +}
>> #endif
>>
>> static void coalesce_file_region(struct resv_map *resv, struct file_region *rg)
>> @@ -431,9 +435,7 @@ static long add_reservation_in_range(struct resv_map *resv, long f, long t,
>> }
>>
>> VM_BUG_ON(add < 0);
>> -#ifdef CONFIG_DEBUG_VM
>> check_coalesce_bug(resv);
>> -#endif
>> return add;
>> }
>>
>> --
>> 2.25.0.265.gbab2e86ba0-goog
thanks.
--
~Randy
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: [PATCH] hugetlb: fix CONFIG_CGROUP_HUGETLB ifdefs
2020-02-15 1:17 ` Randy Dunlap
@ 2020-02-15 1:56 ` Randy Dunlap
2020-02-16 20:40 ` Mina Almasry
2020-02-17 3:53 ` [PATCH] hugetlb: fix CONFIG_CGROUP_HUGETLB ifdefs Stephen Rothwell
0 siblings, 2 replies; 95+ messages in thread
From: Randy Dunlap @ 2020-02-15 1:56 UTC (permalink / raw)
To: Mina Almasry, linux-mm, linux-next, open list
Cc: David Rientjes, Greg Thelen, Mike Kravetz, Shakeel Butt, Andrew Morton
On 2/14/20 5:17 PM, Randy Dunlap wrote:
> On 2/14/20 1:00 PM, Mina Almasry wrote:
>> On Fri, Feb 14, 2020 at 12:46 PM Mina Almasry <almasrymina@google.com> wrote:
>>>
>>> Fixes an #ifdef bug in the patch referred to below that was
>>> causing a build error when CONFIG_DEBUG_VM &&
>>> !CONFIG_CCGROUP_HUGETLB.
>
> Hi Mina,
>
> I don't know if this was supposed to fix the 2 build reports that I made,
> but this does not apply cleanly to mmotm (and it's a reply email so it's
> more difficult to apply anyway):
>
> Applying patch mm-hugetlb-fix-CONFIG_CGROUP_HUGETLB.patch
> patching file mm/hugetlb.c
> Hunk #1 succeeded at 289 with fuzz 1.
> Hunk #2 succeeded at 325 with fuzz 2.
> Hunk #3 FAILED at 435.
> 1 out of 3 hunks FAILED -- rejects in file mm/hugetlb.c
>
OK, I applied this patch manually and it does fix most of the reported build problems.
The only one remaining is this:
CC mm/migrate.o
In file included from ../mm/migrate.c:39:0:
../include/linux/hugetlb_cgroup.h:146:21: warning: ‘struct file_region’ declared inside parameter list will not be visible outside of this definition or declaration
struct file_region *rg,
^~~~~~~~~~~
../include/linux/hugetlb_cgroup.h:145:63: warning: ‘struct resv_map’ declared inside parameter list will not be visible outside of this definition or declaration
static inline void hugetlb_cgroup_uncharge_file_region(struct resv_map *resv,
^~~~~~~~
../include/linux/hugetlb_cgroup.h:233:59: warning: ‘struct resv_map’ declared inside parameter list will not be visible outside of this definition or declaration
static inline void hugetlb_cgroup_uncharge_counter(struct resv_map *resv,
^~~~~~~~
>
>>> Fixes: b5f16a533ce8a ("hugetlb: support file_region coalescing again")
>>> Signed-off-by: Mina Almasry <almasrymina@google.com>
>>> Cc: David Rientjes <rientjes@google.com>
>>> Cc: Greg Thelen <gthelen@google.com>
>>> Cc: Mike Kravetz <mike.kravetz@oracle.com>
>>> Cc: Shakeel Butt <shakeelb@google.com>
>>> Cc: Andrew Morton <akpm@linux-foundation.org>
>>> ---
>>> mm/hugetlb.c | 8 +++++---
>>> 1 file changed, 5 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/mm/hugetlb.c b/mm/hugetlb.c
>>> index ee6d262fe6ac0..95d34c58981d2 100644
>>> --- a/mm/hugetlb.c
>>> +++ b/mm/hugetlb.c
>>> @@ -289,7 +289,7 @@ static bool has_same_uncharge_info(struct file_region *rg,
>>> #endif
>>> }
>>>
>>> -#ifdef CONFIG_DEBUG_VM
>>> +#if defined(CONFIG_DEBUG_VM) && defined(CONFIG_CGROUP_HUGETLB)
>>> static void dump_resv_map(struct resv_map *resv)
>>> {
>>> struct list_head *head = &resv->regions;
>>> @@ -325,6 +325,10 @@ static void check_coalesce_bug(struct resv_map *resv)
>>> }
>>> }
>>> }
>>> +#else
>>> +static void check_coalesce_bug(struct resv_map *resv)
>>> +{
>>> +}
>>> #endif
>>>
>>> static void coalesce_file_region(struct resv_map *resv, struct file_region *rg)
>>> @@ -431,9 +435,7 @@ static long add_reservation_in_range(struct resv_map *resv, long f, long t,
>>> }
>>>
>>> VM_BUG_ON(add < 0);
>>> -#ifdef CONFIG_DEBUG_VM
>>> check_coalesce_bug(resv);
>>> -#endif
>>> return add;
>>> }
>>>
>>> --
>>> 2.25.0.265.gbab2e86ba0-goog
--
~Randy
Reported-by: Randy Dunlap <rdunlap@infradead.org>
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: [PATCH] hugetlb: fix CONFIG_CGROUP_HUGETLB ifdefs
2020-02-15 1:56 ` Randy Dunlap
@ 2020-02-16 20:40 ` Mina Almasry
2020-02-16 21:03 ` Mina Almasry
2020-02-17 3:53 ` [PATCH] hugetlb: fix CONFIG_CGROUP_HUGETLB ifdefs Stephen Rothwell
1 sibling, 1 reply; 95+ messages in thread
From: Mina Almasry @ 2020-02-16 20:40 UTC (permalink / raw)
To: Randy Dunlap
Cc: linux-mm, linux-next, open list, David Rientjes, Greg Thelen,
Mike Kravetz, Shakeel Butt, Andrew Morton
On Fri, Feb 14, 2020 at 5:57 PM Randy Dunlap <rdunlap@infradead.org> wrote:
>
> On 2/14/20 5:17 PM, Randy Dunlap wrote:
> > On 2/14/20 1:00 PM, Mina Almasry wrote:
> >> On Fri, Feb 14, 2020 at 12:46 PM Mina Almasry <almasrymina@google.com> wrote:
> >>>
> >>> Fixes an #ifdef bug in the patch referred to below that was
> >>> causing a build error when CONFIG_DEBUG_VM &&
> >>> !CONFIG_CCGROUP_HUGETLB.
> >
> > Hi Mina,
> >
> > I don't know if this was supposed to fix the 2 build reports that I made,
> > but this does not apply cleanly to mmotm (and it's a reply email so it's
> > more difficult to apply anyway):
> >
> > Applying patch mm-hugetlb-fix-CONFIG_CGROUP_HUGETLB.patch
> > patching file mm/hugetlb.c
> > Hunk #1 succeeded at 289 with fuzz 1.
> > Hunk #2 succeeded at 325 with fuzz 2.
> > Hunk #3 FAILED at 435.
> > 1 out of 3 hunks FAILED -- rejects in file mm/hugetlb.c
> >
>
> OK, I applied this patch manually and it does fix most of the reported build problems.
> The only one remaining is this:
>
> CC mm/migrate.o
> In file included from ../mm/migrate.c:39:0:
> ../include/linux/hugetlb_cgroup.h:146:21: warning: ‘struct file_region’ declared inside parameter list will not be visible outside of this definition or declaration
> struct file_region *rg,
> ^~~~~~~~~~~
> ../include/linux/hugetlb_cgroup.h:145:63: warning: ‘struct resv_map’ declared inside parameter list will not be visible outside of this definition or declaration
> static inline void hugetlb_cgroup_uncharge_file_region(struct resv_map *resv,
> ^~~~~~~~
> ../include/linux/hugetlb_cgroup.h:233:59: warning: ‘struct resv_map’ declared inside parameter list will not be visible outside of this definition or declaration
> static inline void hugetlb_cgroup_uncharge_counter(struct resv_map *resv,
> ^~~~~~~~
>
Hi Randy,
Yes this was supposed to fix the build errors. I'm having trouble
reproducing the one you have pending above. This is my development
environment:
➜ prodkernel2 git:(mm-build-fix) git remote show github-akpm
* remote github-akpm
Fetch URL: https://github.com/hnaz/linux-mm.git
Push URL: https://github.com/hnaz/linux-mm.git
➜ prodkernel2 git:(mm-build-fix) git s
## mm-build-fix...github-akpm/master [ahead 1]
➜ prodkernel2 git:(mm-build-fix) make -j80 mm/migrate.o
(succeeds with no warnings).
➜ prodkernel2 git:(mm-build-fix) make -j80
(succeeds with no warnings)
Is my development environment wrong? Shouldn't I be able to reproduce
this build warning on this tree with my fix?
https://github.com/hnaz/linux-mm.git
I'm using config-r9887 that you sent earlier.
I'm probably supposed to use a different branch since you also say
that my patch doesn't apply cleanily, but the mmotm readme says that
github mirrors Andrew's tree?
> >
> >>> Fixes: b5f16a533ce8a ("hugetlb: support file_region coalescing again")
> >>> Signed-off-by: Mina Almasry <almasrymina@google.com>
> >>> Cc: David Rientjes <rientjes@google.com>
> >>> Cc: Greg Thelen <gthelen@google.com>
> >>> Cc: Mike Kravetz <mike.kravetz@oracle.com>
> >>> Cc: Shakeel Butt <shakeelb@google.com>
> >>> Cc: Andrew Morton <akpm@linux-foundation.org>
> >>> ---
> >>> mm/hugetlb.c | 8 +++++---
> >>> 1 file changed, 5 insertions(+), 3 deletions(-)
> >>>
> >>> diff --git a/mm/hugetlb.c b/mm/hugetlb.c
> >>> index ee6d262fe6ac0..95d34c58981d2 100644
> >>> --- a/mm/hugetlb.c
> >>> +++ b/mm/hugetlb.c
> >>> @@ -289,7 +289,7 @@ static bool has_same_uncharge_info(struct file_region *rg,
> >>> #endif
> >>> }
> >>>
> >>> -#ifdef CONFIG_DEBUG_VM
> >>> +#if defined(CONFIG_DEBUG_VM) && defined(CONFIG_CGROUP_HUGETLB)
> >>> static void dump_resv_map(struct resv_map *resv)
> >>> {
> >>> struct list_head *head = &resv->regions;
> >>> @@ -325,6 +325,10 @@ static void check_coalesce_bug(struct resv_map *resv)
> >>> }
> >>> }
> >>> }
> >>> +#else
> >>> +static void check_coalesce_bug(struct resv_map *resv)
> >>> +{
> >>> +}
> >>> #endif
> >>>
> >>> static void coalesce_file_region(struct resv_map *resv, struct file_region *rg)
> >>> @@ -431,9 +435,7 @@ static long add_reservation_in_range(struct resv_map *resv, long f, long t,
> >>> }
> >>>
> >>> VM_BUG_ON(add < 0);
> >>> -#ifdef CONFIG_DEBUG_VM
> >>> check_coalesce_bug(resv);
> >>> -#endif
> >>> return add;
> >>> }
> >>>
> >>> --
> >>> 2.25.0.265.gbab2e86ba0-goog
>
>
> --
> ~Randy
> Reported-by: Randy Dunlap <rdunlap@infradead.org>
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: [PATCH] hugetlb: fix CONFIG_CGROUP_HUGETLB ifdefs
2020-02-16 20:40 ` Mina Almasry
@ 2020-02-16 21:03 ` Mina Almasry
2020-02-17 2:48 ` Randy Dunlap
0 siblings, 1 reply; 95+ messages in thread
From: Mina Almasry @ 2020-02-16 21:03 UTC (permalink / raw)
To: Randy Dunlap
Cc: linux-mm, linux-next, open list, David Rientjes, Greg Thelen,
Mike Kravetz, Shakeel Butt, Andrew Morton
On Sun, Feb 16, 2020 at 12:40 PM Mina Almasry <almasrymina@google.com> wrote:
>
> On Fri, Feb 14, 2020 at 5:57 PM Randy Dunlap <rdunlap@infradead.org> wrote:
> >
> > On 2/14/20 5:17 PM, Randy Dunlap wrote:
> > > On 2/14/20 1:00 PM, Mina Almasry wrote:
> > >> On Fri, Feb 14, 2020 at 12:46 PM Mina Almasry <almasrymina@google.com> wrote:
> > >>>
> > >>> Fixes an #ifdef bug in the patch referred to below that was
> > >>> causing a build error when CONFIG_DEBUG_VM &&
> > >>> !CONFIG_CCGROUP_HUGETLB.
> > >
> > > Hi Mina,
> > >
> > > I don't know if this was supposed to fix the 2 build reports that I made,
> > > but this does not apply cleanly to mmotm (and it's a reply email so it's
> > > more difficult to apply anyway):
> > >
> > > Applying patch mm-hugetlb-fix-CONFIG_CGROUP_HUGETLB.patch
> > > patching file mm/hugetlb.c
> > > Hunk #1 succeeded at 289 with fuzz 1.
> > > Hunk #2 succeeded at 325 with fuzz 2.
> > > Hunk #3 FAILED at 435.
> > > 1 out of 3 hunks FAILED -- rejects in file mm/hugetlb.c
> > >
> >
> > OK, I applied this patch manually and it does fix most of the reported build problems.
> > The only one remaining is this:
> >
> > CC mm/migrate.o
> > In file included from ../mm/migrate.c:39:0:
> > ../include/linux/hugetlb_cgroup.h:146:21: warning: ‘struct file_region’ declared inside parameter list will not be visible outside of this definition or declaration
> > struct file_region *rg,
> > ^~~~~~~~~~~
> > ../include/linux/hugetlb_cgroup.h:145:63: warning: ‘struct resv_map’ declared inside parameter list will not be visible outside of this definition or declaration
> > static inline void hugetlb_cgroup_uncharge_file_region(struct resv_map *resv,
> > ^~~~~~~~
> > ../include/linux/hugetlb_cgroup.h:233:59: warning: ‘struct resv_map’ declared inside parameter list will not be visible outside of this definition or declaration
> > static inline void hugetlb_cgroup_uncharge_counter(struct resv_map *resv,
> > ^~~~~~~~
> >
>
> Hi Randy,
>
> Yes this was supposed to fix the build errors. I'm having trouble
> reproducing the one you have pending above. This is my development
> environment:
>
> ➜ prodkernel2 git:(mm-build-fix) git remote show github-akpm
> * remote github-akpm
> Fetch URL: https://github.com/hnaz/linux-mm.git
> Push URL: https://github.com/hnaz/linux-mm.git
>
> ➜ prodkernel2 git:(mm-build-fix) git s
> ## mm-build-fix...github-akpm/master [ahead 1]
>
> ➜ prodkernel2 git:(mm-build-fix) make -j80 mm/migrate.o
> (succeeds with no warnings).
>
> ➜ prodkernel2 git:(mm-build-fix) make -j80
> (succeeds with no warnings)
>
> Is my development environment wrong? Shouldn't I be able to reproduce
> this build warning on this tree with my fix?
> https://github.com/hnaz/linux-mm.git
>
> I'm using config-r9887 that you sent earlier.
>
> I'm probably supposed to use a different branch since you also say
> that my patch doesn't apply cleanily, but the mmotm readme says that
> github mirrors Andrew's tree?
>
Just looking at the build error without being able to reproduce, it
looks like this diff would fix it?
➜ prodkernel2 git:(mm-build-fix) ✗ git diff
diff --git a/include/linux/hugetlb_cgroup.h b/include/linux/hugetlb_cgroup.h
index a09d4164ba910..5f66cdcbe9b10 100644
--- a/include/linux/hugetlb_cgroup.h
+++ b/include/linux/hugetlb_cgroup.h
@@ -15,6 +15,7 @@
#ifndef _LINUX_HUGETLB_CGROUP_H
#define _LINUX_HUGETLB_CGROUP_H
+#include <linux/hugetlb.h>
#include <linux/mmdebug.h>
struct hugetlb_cgroup;
Can you let me know? Or any insight into why I can't reproduce the
warning? Wrong tree perhaps?
I suspect a forward declaration of struct resv_map and struct
file_region in hugetlb_cgroup.h would also fix.
> > >
> > >>> Fixes: b5f16a533ce8a ("hugetlb: support file_region coalescing again")
> > >>> Signed-off-by: Mina Almasry <almasrymina@google.com>
> > >>> Cc: David Rientjes <rientjes@google.com>
> > >>> Cc: Greg Thelen <gthelen@google.com>
> > >>> Cc: Mike Kravetz <mike.kravetz@oracle.com>
> > >>> Cc: Shakeel Butt <shakeelb@google.com>
> > >>> Cc: Andrew Morton <akpm@linux-foundation.org>
> > >>> ---
> > >>> mm/hugetlb.c | 8 +++++---
> > >>> 1 file changed, 5 insertions(+), 3 deletions(-)
> > >>>
> > >>> diff --git a/mm/hugetlb.c b/mm/hugetlb.c
> > >>> index ee6d262fe6ac0..95d34c58981d2 100644
> > >>> --- a/mm/hugetlb.c
> > >>> +++ b/mm/hugetlb.c
> > >>> @@ -289,7 +289,7 @@ static bool has_same_uncharge_info(struct file_region *rg,
> > >>> #endif
> > >>> }
> > >>>
> > >>> -#ifdef CONFIG_DEBUG_VM
> > >>> +#if defined(CONFIG_DEBUG_VM) && defined(CONFIG_CGROUP_HUGETLB)
> > >>> static void dump_resv_map(struct resv_map *resv)
> > >>> {
> > >>> struct list_head *head = &resv->regions;
> > >>> @@ -325,6 +325,10 @@ static void check_coalesce_bug(struct resv_map *resv)
> > >>> }
> > >>> }
> > >>> }
> > >>> +#else
> > >>> +static void check_coalesce_bug(struct resv_map *resv)
> > >>> +{
> > >>> +}
> > >>> #endif
> > >>>
> > >>> static void coalesce_file_region(struct resv_map *resv, struct file_region *rg)
> > >>> @@ -431,9 +435,7 @@ static long add_reservation_in_range(struct resv_map *resv, long f, long t,
> > >>> }
> > >>>
> > >>> VM_BUG_ON(add < 0);
> > >>> -#ifdef CONFIG_DEBUG_VM
> > >>> check_coalesce_bug(resv);
> > >>> -#endif
> > >>> return add;
> > >>> }
> > >>>
> > >>> --
> > >>> 2.25.0.265.gbab2e86ba0-goog
> >
> >
> > --
> > ~Randy
> > Reported-by: Randy Dunlap <rdunlap@infradead.org>
^ permalink raw reply related [flat|nested] 95+ messages in thread* Re: [PATCH] hugetlb: fix CONFIG_CGROUP_HUGETLB ifdefs
2020-02-16 21:03 ` Mina Almasry
@ 2020-02-17 2:48 ` Randy Dunlap
2020-02-17 2:57 ` [PATCH] hugetlb: fix <linux/hugetlb_cgroup.h> structs Randy Dunlap
0 siblings, 1 reply; 95+ messages in thread
From: Randy Dunlap @ 2020-02-17 2:48 UTC (permalink / raw)
To: Mina Almasry
Cc: linux-mm, linux-next, open list, David Rientjes, Greg Thelen,
Mike Kravetz, Shakeel Butt, Andrew Morton
On 2/16/20 1:03 PM, Mina Almasry wrote:
> On Sun, Feb 16, 2020 at 12:40 PM Mina Almasry <almasrymina@google.com> wrote:
>>
>> On Fri, Feb 14, 2020 at 5:57 PM Randy Dunlap <rdunlap@infradead.org> wrote:
>>>
>>> On 2/14/20 5:17 PM, Randy Dunlap wrote:
>>>> On 2/14/20 1:00 PM, Mina Almasry wrote:
>>>>> On Fri, Feb 14, 2020 at 12:46 PM Mina Almasry <almasrymina@google.com> wrote:
>>>>>>
>>>>>> Fixes an #ifdef bug in the patch referred to below that was
>>>>>> causing a build error when CONFIG_DEBUG_VM &&
>>>>>> !CONFIG_CCGROUP_HUGETLB.
>>>>
>>>> Hi Mina,
>>>>
>>>> I don't know if this was supposed to fix the 2 build reports that I made,
>>>> but this does not apply cleanly to mmotm (and it's a reply email so it's
>>>> more difficult to apply anyway):
>>>>
>>>> Applying patch mm-hugetlb-fix-CONFIG_CGROUP_HUGETLB.patch
>>>> patching file mm/hugetlb.c
>>>> Hunk #1 succeeded at 289 with fuzz 1.
>>>> Hunk #2 succeeded at 325 with fuzz 2.
>>>> Hunk #3 FAILED at 435.
>>>> 1 out of 3 hunks FAILED -- rejects in file mm/hugetlb.c
>>>>
>>>
>>> OK, I applied this patch manually and it does fix most of the reported build problems.
>>> The only one remaining is this:
>>>
>>> CC mm/migrate.o
>>> In file included from ../mm/migrate.c:39:0:
>>> ../include/linux/hugetlb_cgroup.h:146:21: warning: ‘struct file_region’ declared inside parameter list will not be visible outside of this definition or declaration
>>> struct file_region *rg,
>>> ^~~~~~~~~~~
>>> ../include/linux/hugetlb_cgroup.h:145:63: warning: ‘struct resv_map’ declared inside parameter list will not be visible outside of this definition or declaration
>>> static inline void hugetlb_cgroup_uncharge_file_region(struct resv_map *resv,
>>> ^~~~~~~~
>>> ../include/linux/hugetlb_cgroup.h:233:59: warning: ‘struct resv_map’ declared inside parameter list will not be visible outside of this definition or declaration
>>> static inline void hugetlb_cgroup_uncharge_counter(struct resv_map *resv,
>>> ^~~~~~~~
>>>
>>
>> Hi Randy,
>>
>> Yes this was supposed to fix the build errors. I'm having trouble
>> reproducing the one you have pending above. This is my development
>> environment:
>>
>> ➜ prodkernel2 git:(mm-build-fix) git remote show github-akpm
>> * remote github-akpm
>> Fetch URL: https://github.com/hnaz/linux-mm.git
>> Push URL: https://github.com/hnaz/linux-mm.git
>>
>> ➜ prodkernel2 git:(mm-build-fix) git s
>> ## mm-build-fix...github-akpm/master [ahead 1]
>>
>> ➜ prodkernel2 git:(mm-build-fix) make -j80 mm/migrate.o
>> (succeeds with no warnings).
>>
>> ➜ prodkernel2 git:(mm-build-fix) make -j80
>> (succeeds with no warnings)
>>
>> Is my development environment wrong? Shouldn't I be able to reproduce
>> this build warning on this tree with my fix?
>> https://github.com/hnaz/linux-mm.git
>>
>> I'm using config-r9887 that you sent earlier.
>>
>> I'm probably supposed to use a different branch since you also say
>> that my patch doesn't apply cleanily, but the mmotm readme says that
>> github mirrors Andrew's tree?
>>
>
> Just looking at the build error without being able to reproduce, it
> looks like this diff would fix it?
Hi Mina,
This patch does not fix the build warnings that I reported.
The initial report is here:
https://lore.kernel.org/lkml/97879032-f159-f1c6-9cde-d4e0389b2d7f@infradead.org/
and the kernel .config file is named config-r9883 (not r9887).
> ➜ prodkernel2 git:(mm-build-fix) ✗ git diff
> diff --git a/include/linux/hugetlb_cgroup.h b/include/linux/hugetlb_cgroup.h
> index a09d4164ba910..5f66cdcbe9b10 100644
> --- a/include/linux/hugetlb_cgroup.h
> +++ b/include/linux/hugetlb_cgroup.h
> @@ -15,6 +15,7 @@
> #ifndef _LINUX_HUGETLB_CGROUP_H
> #define _LINUX_HUGETLB_CGROUP_H
>
> +#include <linux/hugetlb.h>
> #include <linux/mmdebug.h>
>
> struct hugetlb_cgroup;
>
> Can you let me know? Or any insight into why I can't reproduce the
> warning? Wrong tree perhaps?
>
> I suspect a forward declaration of struct resv_map and struct
> file_region in hugetlb_cgroup.h would also fix.
--
~Randy
^ permalink raw reply [flat|nested] 95+ messages in thread
* [PATCH] hugetlb: fix <linux/hugetlb_cgroup.h> structs
2020-02-17 2:48 ` Randy Dunlap
@ 2020-02-17 2:57 ` Randy Dunlap
0 siblings, 0 replies; 95+ messages in thread
From: Randy Dunlap @ 2020-02-17 2:57 UTC (permalink / raw)
To: Mina Almasry
Cc: linux-mm, linux-next, open list, David Rientjes, Greg Thelen,
Mike Kravetz, Shakeel Butt, Andrew Morton, Stephen Rothwell
On 2/16/20 6:48 PM, Randy Dunlap wrote:
> On 2/16/20 1:03 PM, Mina Almasry wrote:
>> On Sun, Feb 16, 2020 at 12:40 PM Mina Almasry <almasrymina@google.com> wrote:
>>>
>> any insight into why I can't reproduce the
>> warning? Wrong tree perhaps?
>>
>> I suspect a forward declaration of struct resv_map and struct
>> file_region in hugetlb_cgroup.h would also fix.
Yes, adding struct stubs in that header file does remove the
build warnings.
thanks.
=== patch follows ===
From: Randy Dunlap <rdunlap@infradead.org>
Fix build warnings when CONFIG_HUGETLB is not set/enabled.
Fixes these warnings:
In file included from ../mm/migrate.c:39:0:
../include/linux/hugetlb_cgroup.h:147:21: warning: ‘struct file_region’ declared inside parameter list will not be visible outside of this definition or declaration
struct file_region *rg,
^~~~~~~~~~~
../include/linux/hugetlb_cgroup.h:146:63: warning: ‘struct resv_map’ declared inside parameter list will not be visible outside of this definition or declaration
static inline void hugetlb_cgroup_uncharge_file_region(struct resv_map *resv,
^~~~~~~~
../include/linux/hugetlb_cgroup.h:234:59: warning: ‘struct resv_map’ declared inside parameter list will not be visible outside of this definition or declaration
static inline void hugetlb_cgroup_uncharge_counter(struct resv_map *resv,
^~~~~~~~
Suggested-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
---
include/linux/hugetlb_cgroup.h | 3 +++
1 file changed, 3 insertions(+)
--- mmotm-2020-0213-2226.orig/include/linux/hugetlb_cgroup.h
+++ mmotm-2020-0213-2226/include/linux/hugetlb_cgroup.h
@@ -18,6 +18,9 @@
#include <linux/mmdebug.h>
struct hugetlb_cgroup;
+struct file_region;
+struct resv_map;
+
/*
* Minimum page order trackable by hugetlb cgroup.
* At least 4 pages are necessary for all the tracking information.
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: [PATCH] hugetlb: fix CONFIG_CGROUP_HUGETLB ifdefs
2020-02-15 1:56 ` Randy Dunlap
2020-02-16 20:40 ` Mina Almasry
@ 2020-02-17 3:53 ` Stephen Rothwell
1 sibling, 0 replies; 95+ messages in thread
From: Stephen Rothwell @ 2020-02-17 3:53 UTC (permalink / raw)
To: Randy Dunlap
Cc: Mina Almasry, linux-mm, linux-next, open list, David Rientjes,
Greg Thelen, Mike Kravetz, Shakeel Butt, Andrew Morton
[-- Attachment #1: Type: text/plain, Size: 1126 bytes --]
Hi all,
On Fri, 14 Feb 2020 17:56:57 -0800 Randy Dunlap <rdunlap@infradead.org> wrote:
>
> On 2/14/20 5:17 PM, Randy Dunlap wrote:
> > On 2/14/20 1:00 PM, Mina Almasry wrote:
> >> On Fri, Feb 14, 2020 at 12:46 PM Mina Almasry <almasrymina@google.com> wrote:
> >>>
> >>> Fixes an #ifdef bug in the patch referred to below that was
> >>> causing a build error when CONFIG_DEBUG_VM &&
> >>> !CONFIG_CCGROUP_HUGETLB.
> >
> > Hi Mina,
> >
> > I don't know if this was supposed to fix the 2 build reports that I made,
> > but this does not apply cleanly to mmotm (and it's a reply email so it's
> > more difficult to apply anyway):
> >
> > Applying patch mm-hugetlb-fix-CONFIG_CGROUP_HUGETLB.patch
> > patching file mm/hugetlb.c
> > Hunk #1 succeeded at 289 with fuzz 1.
> > Hunk #2 succeeded at 325 with fuzz 2.
> > Hunk #3 FAILED at 435.
> > 1 out of 3 hunks FAILED -- rejects in file mm/hugetlb.c
> >
>
> OK, I applied this patch manually and it does fix most of the reported build problems.
I have also applied that patch by had to linux-next today.
--
Cheers,
Stephen Rothwell
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: mmotm 2020-02-13-22-26 uploaded (mm/migrate.c, hugetlb_cgroup.h)
2020-02-14 6:26 ` mmotm 2020-02-13-22-26 uploaded Andrew Morton
2020-02-14 16:29 ` mmotm 2020-02-13-22-26 uploaded (mm/hugetlb.c) Randy Dunlap
@ 2020-02-14 16:49 ` Randy Dunlap
1 sibling, 0 replies; 95+ messages in thread
From: Randy Dunlap @ 2020-02-14 16:49 UTC (permalink / raw)
To: Andrew Morton, broonie, linux-fsdevel, linux-kernel, linux-mm,
linux-next, mhocko, mm-commits, sfr, Matthew Wilcox
[-- Attachment #1: Type: text/plain, Size: 1414 bytes --]
On 2/13/20 10:26 PM, Andrew Morton wrote:
> The mm-of-the-moment snapshot 2020-02-13-22-26 has been uploaded to
>
> http://www.ozlabs.org/~akpm/mmotm/
>
> mmotm-readme.txt says
>
> README for mm-of-the-moment:
>
> http://www.ozlabs.org/~akpm/mmotm/
>
> This is a snapshot of my -mm patch queue. Uploaded at random hopefully
> more than once a week.
>
on x86_64:
In file included from ../mm/migrate.c:39:0:
../include/linux/hugetlb_cgroup.h:146:21: warning: ‘struct file_region’ declared inside parameter list will not be visible outside of this definition or declaration
struct file_region *rg,
^~~~~~~~~~~
../include/linux/hugetlb_cgroup.h:145:63: warning: ‘struct resv_map’ declared inside parameter list will not be visible outside of this definition or declaration
static inline void hugetlb_cgroup_uncharge_file_region(struct resv_map *resv,
^~~~~~~~
../include/linux/hugetlb_cgroup.h:233:59: warning: ‘struct resv_map’ declared inside parameter list will not be visible outside of this definition or declaration
static inline void hugetlb_cgroup_uncharge_counter(struct resv_map *resv,
^~~~~~~~
Full randconfig file is attached.
--
~Randy
Reported-by: Randy Dunlap <rdunlap@infradead.org>
[-- Attachment #2: config-r9883 --]
[-- Type: text/plain, Size: 144618 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 5.6.0-rc1-mm1 Kernel Configuration
#
#
# Compiler: gcc (SUSE Linux) 7.5.0
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=70500
CONFIG_CLANG_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU=y
# end of RCU Subsystem
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_IKHEADERS=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_RDMA=y
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_TIME_NS is not set
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
# CONFIG_RD_XZ is not set
CONFIG_RD_LZO=y
# CONFIG_RD_LZ4 is not set
CONFIG_BOOT_CONFIG=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
# CONFIG_PRINTK is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_MEMBARRIER is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_BPF_SYSCALL=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
# CONFIG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# end of Kernel Performance Events And Counters
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
# CONFIG_SLAB_MERGE_DEFAULT is not set
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
# end of General setup
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DYNAMIC_PHYSICAL_MASK=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
# CONFIG_SMP is not set
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_MPPARSE=y
CONFIG_GOLDFISH=y
# CONFIG_RETPOLINE is not set
CONFIG_X86_CPU_RESCTRL=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
CONFIG_X86_AMD_PLATFORM_DEVICE=y
CONFIG_IOSF_MBI=y
CONFIG_IOSF_MBI_DEBUG=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
# CONFIG_HYPERVISOR_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_PROCESSOR_SELECT=y
# CONFIG_CPU_SUP_INTEL is not set
CONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_HYGON is not set
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_NR_CPUS_RANGE_BEGIN=1
CONFIG_NR_CPUS_RANGE_END=1
CONFIG_NR_CPUS_DEFAULT=1
CONFIG_NR_CPUS=1
CONFIG_UP_LATE_INIT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
# CONFIG_X86_MCE is not set
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_AMD_POWER=y
# end of Performance monitoring
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
CONFIG_I8K=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_5LEVEL=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_X86_CPA_STATISTICS=y
CONFIG_AMD_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
# CONFIG_ARCH_RANDOM is not set
# CONFIG_X86_SMAP is not set
CONFIG_X86_UMIP=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_COMPAT_VDSO=y
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
# CONFIG_LEGACY_VSYSCALL_NONE is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
CONFIG_CMDLINE_OVERRIDE=y
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# end of Processor type and features
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
CONFIG_ACPI_DEBUGGER=y
CONFIG_ACPI_DEBUGGER_USER=y
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_TABLE_UPGRADE is not set
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_HOTPLUG_MEMORY is not set
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=y
CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
CONFIG_DPTF_POWER=y
CONFIG_PMIC_OPREGION=y
# CONFIG_XPOWER_PMIC_OPREGION is not set
CONFIG_CHT_DC_TI_PMIC_OPREGION=y
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_X86_PM_TIMER is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_AMD_FREQ_SENSITIVITY=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_P4_CLOCKMOD=y
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# end of CPU Idle
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_MMCONF_FAM10H=y
CONFIG_PCI_CNB20LE_QUIRK=y
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_X86_SYSFB=y
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
CONFIG_X86_X32=y
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
# end of Binary Emulations
#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT is not set
# CONFIG_FW_CFG_SYSFS is not set
CONFIG_GOOGLE_FIRMWARE=y
# CONFIG_GOOGLE_SMI is not set
CONFIG_GOOGLE_COREBOOT_TABLE=y
CONFIG_GOOGLE_MEMCONSOLE=y
# CONFIG_GOOGLE_MEMCONSOLE_X86_LEGACY is not set
CONFIG_GOOGLE_MEMCONSOLE_COREBOOT=y
CONFIG_GOOGLE_VPD=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
#
# General architecture-dependent options
#
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
# CONFIG_STACKPROTECTOR is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_ISA_BUS_API=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
# CONFIG_VMAP_STACK is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_PLUGIN_HOSTCC=""
CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
CONFIG_BLK_DEV_ZONED=y
# CONFIG_BLK_CMDLINE_PARSER is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
CONFIG_BLK_SED_OPAL=y
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
CONFIG_BLK_PM=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
# end of IO Schedulers
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
# CONFIG_MEMORY_HOTREMOVE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_THP_SWAP=y
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
CONFIG_MEM_SOFT_DIRTY=y
CONFIG_ZPOOL=y
# CONFIG_ZBUD is not set
CONFIG_Z3FOLD=y
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_FRAME_VECTOR=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_MAPPING_DIRTY_HELPERS=y
# end of Memory Management options
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
# CONFIG_UNIX_DIAG is not set
CONFIG_TLS=y
CONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
# CONFIG_NET_KEY is not set
# CONFIG_SMC is not set
CONFIG_XDP_SOCKETS=y
CONFIG_XDP_SOCKETS_DIAG=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_ESP_OFFLOAD=y
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
CONFIG_MPTCP=y
# CONFIG_MPTCP_IPV6 is not set
CONFIG_MPTCP_HMAC_TEST=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_INGRESS is not set
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_ACCT=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NETFILTER_NETLINK_OSF=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_LOG_COMMON=y
CONFIG_NF_LOG_NETDEV=y
CONFIG_NETFILTER_CONNCOUNT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
# CONFIG_NF_CONNTRACK_ZONES is not set
# CONFIG_NF_CONNTRACK_PROCFS is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
# CONFIG_NF_CONNTRACK_LABELS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_SNMP=y
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
# CONFIG_NF_CONNTRACK_TFTP is not set
CONFIG_NF_CT_NETLINK=y
CONFIG_NF_CT_NETLINK_TIMEOUT=y
# CONFIG_NF_CT_NETLINK_HELPER is not set
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_SIP=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=y
CONFIG_NF_TABLES=y
CONFIG_NF_TABLES_SET=y
CONFIG_NF_TABLES_NETDEV=y
# CONFIG_NFT_NUMGEN is not set
CONFIG_NFT_CT=y
CONFIG_NFT_COUNTER=y
CONFIG_NFT_CONNLIMIT=y
CONFIG_NFT_LOG=y
# CONFIG_NFT_LIMIT is not set
CONFIG_NFT_MASQ=y
# CONFIG_NFT_REDIR is not set
CONFIG_NFT_TUNNEL=y
CONFIG_NFT_OBJREF=y
CONFIG_NFT_QUEUE=y
CONFIG_NFT_QUOTA=y
CONFIG_NFT_REJECT=y
# CONFIG_NFT_COMPAT is not set
CONFIG_NFT_HASH=y
CONFIG_NFT_XFRM=y
CONFIG_NFT_SOCKET=y
CONFIG_NFT_OSF=y
CONFIG_NFT_TPROXY=y
CONFIG_NFT_SYNPROXY=y
CONFIG_NF_DUP_NETDEV=y
# CONFIG_NFT_DUP_NETDEV is not set
CONFIG_NFT_FWD_NETDEV=y
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y
# CONFIG_NETFILTER_XT_SET is not set
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=y
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_HMARK=y
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
CONFIG_NETFILTER_XT_TARGET_LED=y
CONFIG_NETFILTER_XT_TARGET_LOG=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_NAT=y
CONFIG_NETFILTER_XT_TARGET_NETMAP=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=y
CONFIG_NETFILTER_XT_TARGET_TEE=y
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
CONFIG_NETFILTER_XT_MATCH_CGROUP=y
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
CONFIG_NETFILTER_XT_MATCH_CPU=y
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ECN is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_HELPER=y
# CONFIG_NETFILTER_XT_MATCH_HL is not set
CONFIG_NETFILTER_XT_MATCH_IPCOMP=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_L2TP=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_NFACCT=y
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_SOCKET=y
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
# end of Core Netfilter Configuration
CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
# CONFIG_IP_SET_BITMAP_IP is not set
CONFIG_IP_SET_BITMAP_IPMAC=y
# CONFIG_IP_SET_BITMAP_PORT is not set
CONFIG_IP_SET_HASH_IP=y
# CONFIG_IP_SET_HASH_IPMARK is not set
# CONFIG_IP_SET_HASH_IPPORT is not set
CONFIG_IP_SET_HASH_IPPORTIP=y
# CONFIG_IP_SET_HASH_IPPORTNET is not set
CONFIG_IP_SET_HASH_IPMAC=y
CONFIG_IP_SET_HASH_MAC=y
CONFIG_IP_SET_HASH_NETPORTNET=y
# CONFIG_IP_SET_HASH_NET is not set
CONFIG_IP_SET_HASH_NETNET=y
# CONFIG_IP_SET_HASH_NETPORT is not set
# CONFIG_IP_SET_HASH_NETIFACE is not set
CONFIG_IP_SET_LIST_SET=y
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_SOCKET_IPV4=y
CONFIG_NF_TPROXY_IPV4=y
# CONFIG_NF_TABLES_IPV4 is not set
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=y
CONFIG_NF_LOG_ARP=y
CONFIG_NF_LOG_IPV4=y
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_SNMP_BASIC=y
CONFIG_NF_NAT_PPTP=y
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# end of IP: Netfilter Configuration
#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
# end of DECnet: Netfilter Configuration
CONFIG_NF_CONNTRACK_BRIDGE=y
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE=y
# CONFIG_SCTP_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
# CONFIG_RDS is not set
CONFIG_TIPC=y
# CONFIG_TIPC_MEDIA_UDP is not set
# CONFIG_TIPC_CRYPTO is not set
# CONFIG_TIPC_DIAG is not set
# CONFIG_ATM is not set
CONFIG_L2TP=y
# CONFIG_L2TP_DEBUGFS is not set
# CONFIG_L2TP_V3 is not set
CONFIG_MRP=y
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_8021Q=y
CONFIG_NET_DSA_TAG_AR9331=y
CONFIG_NET_DSA_TAG_BRCM_COMMON=y
CONFIG_NET_DSA_TAG_BRCM=y
CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
CONFIG_NET_DSA_TAG_GSWIP=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_MTK=y
# CONFIG_NET_DSA_TAG_KSZ is not set
# CONFIG_NET_DSA_TAG_OCELOT is not set
CONFIG_NET_DSA_TAG_QCA=y
CONFIG_NET_DSA_TAG_LAN9303=y
CONFIG_NET_DSA_TAG_SJA1105=y
# CONFIG_NET_DSA_TAG_TRAILER is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
CONFIG_LAPB=y
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=y
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_PRIO=y
# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=y
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
# CONFIG_NET_SCH_TBF is not set
CONFIG_NET_SCH_CBS=y
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
# CONFIG_NET_SCH_MQPRIO is not set
CONFIG_NET_SCH_SKBPRIO=y
CONFIG_NET_SCH_CHOKE=y
CONFIG_NET_SCH_QFQ=y
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=y
CONFIG_NET_SCH_HHF=y
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_PLUG=y
CONFIG_NET_SCH_ETS=y
# CONFIG_NET_SCH_DEFAULT is not set
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=y
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
CONFIG_NET_CLS_U32=y
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=y
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_VSOCKETS=y
CONFIG_VSOCKETS_DIAG=y
CONFIG_VSOCKETS_LOOPBACK=y
CONFIG_VMWARE_VMCI_VSOCKETS=y
# CONFIG_VIRTIO_VSOCKETS is not set
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_NETLINK_DIAG=y
# CONFIG_MPLS is not set
CONFIG_NET_NSH=y
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_STREAM_PARSER is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=y
# end of Network testing
# end of Networking options
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
# CONFIG_NETROM is not set
CONFIG_ROSE=y
#
# AX.25 network device drivers
#
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=y
CONFIG_BAYCOM_SER_HDX=y
# CONFIG_BAYCOM_PAR is not set
CONFIG_YAM=y
# end of AX.25 network device drivers
CONFIG_CAN=y
# CONFIG_CAN_RAW is not set
CONFIG_CAN_BCM=y
# CONFIG_CAN_GW is not set
CONFIG_CAN_J1939=y
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=y
CONFIG_CAN_VXCAN=y
CONFIG_CAN_DEV=y
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_JANZ_ICAN3 is not set
# CONFIG_CAN_KVASER_PCIEFD is not set
CONFIG_CAN_C_CAN=y
# CONFIG_CAN_C_CAN_PLATFORM is not set
CONFIG_CAN_C_CAN_PCI=y
CONFIG_CAN_CC770=y
CONFIG_CAN_CC770_ISA=y
CONFIG_CAN_CC770_PLATFORM=y
CONFIG_CAN_IFI_CANFD=y
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_PEAK_PCIEFD is not set
# CONFIG_CAN_SJA1000 is not set
CONFIG_CAN_SOFTING=y
CONFIG_CAN_SOFTING_CS=y
#
# CAN SPI interfaces
#
CONFIG_CAN_HI311X=y
CONFIG_CAN_MCP251X=y
# end of CAN SPI interfaces
#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=y
# CONFIG_CAN_EMS_USB is not set
CONFIG_CAN_ESD_USB2=y
CONFIG_CAN_GS_USB=y
# CONFIG_CAN_KVASER_USB is not set
CONFIG_CAN_MCBA_USB=y
CONFIG_CAN_PEAK_USB=y
CONFIG_CAN_UCAN=y
# end of CAN USB interfaces
# CONFIG_CAN_DEBUG_DEVICES is not set
# end of CAN Device Drivers
CONFIG_BT=y
# CONFIG_BT_BREDR is not set
# CONFIG_BT_LE is not set
# CONFIG_BT_LEDS is not set
CONFIG_BT_SELFTEST=y
# CONFIG_BT_DEBUGFS is not set
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=y
CONFIG_BT_RTL=y
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
# CONFIG_BT_HCIBTUSB_BCM is not set
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIBCM203X is not set
CONFIG_BT_HCIBPA10X=y
# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIDTL1=y
CONFIG_BT_HCIBT3C=y
CONFIG_BT_HCIBLUECARD=y
CONFIG_BT_HCIVHCI=y
# CONFIG_BT_MRVL is not set
CONFIG_BT_ATH3K=y
# CONFIG_BT_MTKSDIO is not set
CONFIG_BT_MTKUART=y
# end of Bluetooth device drivers
# CONFIG_AF_RXRPC is not set
CONFIG_AF_KCM=y
CONFIG_STREAM_PARSER=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_CRDA_SUPPORT is not set
CONFIG_CFG80211_WEXT=y
# CONFIG_MAC80211 is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
CONFIG_NET_IFE=y
CONFIG_LWTUNNEL=y
# CONFIG_LWTUNNEL_BPF is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
# CONFIG_PCIE_PTM is not set
CONFIG_PCIE_BW=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_QUIRKS is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set
#
# PCI controller drivers
#
CONFIG_VMD=y
#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCIE_DW_PLAT_EP is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support
#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
# CONFIG_PCI_ENDPOINT_CONFIGFS is not set
# CONFIG_PCI_EPF_TEST is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=y
# end of PCI switch controller drivers
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
# CONFIG_CARDBUS is not set
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
# CONFIG_YENTA_RICOH is not set
CONFIG_YENTA_TI=y
# CONFIG_YENTA_TOSHIBA is not set
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_COMPRESS=y
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
# end of Bus devices
# CONFIG_CONNECTOR is not set
CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
# CONFIG_GNSS_MTK_SERIAL is not set
CONFIG_GNSS_SIRF_SERIAL=y
CONFIG_GNSS_UBX_SERIAL=y
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
CONFIG_PARPORT_AX88796=y
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=y
# CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION is not set
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=y
CONFIG_PARIDE=y
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=y
# CONFIG_PARIDE_PCD is not set
CONFIG_PARIDE_PF=y
CONFIG_PARIDE_PT=y
# CONFIG_PARIDE_PG is not set
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=y
# CONFIG_PARIDE_BPCK is not set
CONFIG_PARIDE_COMM=y
CONFIG_PARIDE_DSTR=y
CONFIG_PARIDE_FIT2=y
CONFIG_PARIDE_FIT3=y
# CONFIG_PARIDE_EPAT is not set
CONFIG_PARIDE_EPIA=y
# CONFIG_PARIDE_FRIQ is not set
# CONFIG_PARIDE_FRPW is not set
CONFIG_PARIDE_KBIC=y
# CONFIG_PARIDE_KTTI is not set
# CONFIG_PARIDE_ON20 is not set
CONFIG_PARIDE_ON26=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_DRBD=y
CONFIG_DRBD_FAULT_INJECTION=y
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_SKD=y
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_RBD=y
CONFIG_BLK_DEV_RSXX=y
#
# NVME Support
#
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=y
# CONFIG_NVME_FC is not set
CONFIG_NVME_TCP=y
# CONFIG_NVME_TARGET is not set
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
# CONFIG_AD525X_DPOT_SPI is not set
CONFIG_DUMMY_IRQ=y
# CONFIG_IBM_ASM is not set
CONFIG_PHANTOM=y
# CONFIG_TIFM_CORE is not set
CONFIG_ICS932S401=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_HP_ILO=y
CONFIG_APDS9802ALS=y
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
CONFIG_PCI_ENDPOINT_TEST=y
CONFIG_XILINX_SDFEC=y
# CONFIG_PVPANIC is not set
CONFIG_C2PORT=y
# CONFIG_C2PORT_DURAMAR_2150 is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_93XX46 is not set
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_EEPROM_EE1004=y
# end of EEPROM support
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=y
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_INTEL_MEI_HDCP=y
CONFIG_VMWARE_VMCI=y
#
# Intel MIC & related support
#
CONFIG_INTEL_MIC_BUS=y
CONFIG_SCIF_BUS=y
CONFIG_VOP_BUS=y
# CONFIG_INTEL_MIC_HOST is not set
# CONFIG_INTEL_MIC_CARD is not set
CONFIG_SCIF=y
CONFIG_MIC_COSM=y
CONFIG_VOP=y
CONFIG_VHOST_RING=y
# end of Intel MIC & related support
CONFIG_GENWQE=y
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
CONFIG_ECHO=y
CONFIG_MISC_ALCOR_PCI=y
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
CONFIG_HABANA_AI=y
# end of Misc devices
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.rst for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
CONFIG_BLK_DEV_IDE_SATA=y
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS is not set
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_PROC_FS is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_PLATFORM=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_OPTI621=y
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=y
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_ATIIXP=y
# CONFIG_BLK_DEV_CMD64X is not set
CONFIG_BLK_DEV_TRIFLEX=y
CONFIG_BLK_DEV_HPT366=y
CONFIG_BLK_DEV_JMICRON=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IT8172=y
# CONFIG_BLK_DEV_IT8213 is not set
CONFIG_BLK_DEV_IT821X=y
# CONFIG_BLK_DEV_NS87415 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
CONFIG_BLK_DEV_SLC90E66=y
CONFIG_BLK_DEV_TRM290=y
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_TC86C001=y
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=y
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_ISCSI_BOOT_SYSFS=y
# CONFIG_SCSI_CXGB3_ISCSI is not set
CONFIG_SCSI_CXGB4_ISCSI=y
CONFIG_SCSI_BNX2_ISCSI=y
CONFIG_BE2ISCSI=y
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=y
CONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=y
# CONFIG_SCSI_MVSAS_DEBUG is not set
# CONFIG_SCSI_MVSAS_TASKLET is not set
CONFIG_SCSI_MVUMI=y
CONFIG_SCSI_DPT_I2O=y
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=y
# CONFIG_SCSI_ESAS2R is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT3SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_FLASHPOINT=y
# CONFIG_SCSI_MYRB is not set
CONFIG_SCSI_MYRS=y
CONFIG_VMWARE_PVSCSI=y
CONFIG_SCSI_SNIC=y
CONFIG_SCSI_SNIC_DEBUG_FS=y
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_FDOMAIN=y
CONFIG_SCSI_FDOMAIN_PCI=y
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_ISCI=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
CONFIG_SCSI_INIA100=y
# CONFIG_SCSI_PPA is not set
CONFIG_SCSI_IMM=y
CONFIG_SCSI_IZIP_EPP16=y
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_ISCSI=y
# CONFIG_QEDI is not set
# CONFIG_SCSI_DC395x is not set
CONFIG_SCSI_AM53C974=y
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=y
CONFIG_SCSI_PMCRAID=y
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# end of SCSI device support
CONFIG_ATA=y
# CONFIG_ATA_VERBOSE_ERROR is not set
# CONFIG_ATA_ACPI is not set
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SATA_INIC162X=y
CONFIG_SATA_ACARD_AHCI=y
CONFIG_SATA_SIL24=y
# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_MULTIPATH=y
# CONFIG_MD_FAULTY is not set
CONFIG_MD_CLUSTER=y
CONFIG_BCACHE=y
CONFIG_BCACHE_DEBUG=y
CONFIG_BCACHE_CLOSURES_DEBUG=y
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=y
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=y
CONFIG_DM_PERSISTENT_DATA=y
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=y
CONFIG_DM_CACHE=y
# CONFIG_DM_CACHE_SMQ is not set
# CONFIG_DM_WRITECACHE is not set
CONFIG_DM_ERA=y
# CONFIG_DM_CLONE is not set
# CONFIG_DM_MIRROR is not set
CONFIG_DM_RAID=y
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_DUST=y
# CONFIG_DM_INIT is not set
# CONFIG_DM_UEVENT is not set
CONFIG_DM_FLAKEY=y
CONFIG_DM_VERITY=y
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=y
# CONFIG_DM_LOG_WRITES is not set
CONFIG_DM_INTEGRITY=y
# CONFIG_DM_ZONED is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_SBP2=y
CONFIG_FIREWIRE_NET=y
CONFIG_FIREWIRE_NOSY=y
# end of IEEE 1394 (FireWire) support
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
# CONFIG_NET_CORE is not set
CONFIG_SUNGEM_PHY=y
# CONFIG_ARCNET is not set
#
# Distributed Switch Architecture drivers
#
CONFIG_B53=y
CONFIG_B53_SPI_DRIVER=y
CONFIG_B53_MDIO_DRIVER=y
CONFIG_B53_MMAP_DRIVER=y
CONFIG_B53_SRAB_DRIVER=y
# CONFIG_B53_SERDES is not set
CONFIG_NET_DSA_BCM_SF2=y
CONFIG_NET_DSA_LOOP=y
CONFIG_NET_DSA_LANTIQ_GSWIP=y
CONFIG_NET_DSA_MT7530=y
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MICROCHIP_KSZ9477 is not set
# CONFIG_NET_DSA_MICROCHIP_KSZ8795 is not set
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_AR9331 is not set
CONFIG_NET_DSA_SJA1105=y
CONFIG_NET_DSA_SJA1105_PTP=y
CONFIG_NET_DSA_QCA8K=y
CONFIG_NET_DSA_REALTEK_SMI=y
CONFIG_NET_DSA_SMSC_LAN9303=y
# CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set
CONFIG_NET_DSA_SMSC_LAN9303_MDIO=y
CONFIG_NET_DSA_VITESSE_VSC73XX=y
CONFIG_NET_DSA_VITESSE_VSC73XX_SPI=y
# CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM is not set
# end of Distributed Switch Architecture drivers
CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_PCMCIA_3C574=y
CONFIG_PCMCIA_3C589=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
CONFIG_NET_VENDOR_ALACRITECH=y
CONFIG_SLICOSS=y
# CONFIG_NET_VENDOR_ALTEON is not set
CONFIG_ALTERA_TSE=y
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
CONFIG_NET_VENDOR_ARC=y
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
CONFIG_BCMGENET=y
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_TIGON3=y
# CONFIG_TIGON3_HWMON is not set
# CONFIG_BNX2X is not set
CONFIG_SYSTEMPORT=y
CONFIG_BNXT=y
CONFIG_BNXT_FLOWER_OFFLOAD=y
CONFIG_BNXT_HWMON=y
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=y
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=y
# CONFIG_CHELSIO_T1_1G is not set
CONFIG_CHELSIO_T3=y
CONFIG_CHELSIO_T4=y
CONFIG_CHELSIO_T4VF=y
CONFIG_CHELSIO_LIB=y
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=y
# CONFIG_NET_VENDOR_CORTINA is not set
CONFIG_CX_ECAT=y
CONFIG_DNET=y
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=y
CONFIG_SUNDANCE=y
CONFIG_SUNDANCE_MMIO=y
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=y
CONFIG_BE2NET_HWMON=y
# CONFIG_BE2NET_BE2 is not set
CONFIG_BE2NET_BE3=y
# CONFIG_BE2NET_LANCER is not set
# CONFIG_BE2NET_SKYHAWK is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=y
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_GVE=y
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=y
# CONFIG_ENC28J60_WRITEVERIFY is not set
CONFIG_ENCX24J600=y
CONFIG_LAN743X=y
# CONFIG_NET_VENDOR_MICROSEMI is not set
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=y
CONFIG_FEALNX=y
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NETERION=y
CONFIG_S2IO=y
# CONFIG_VXGE is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NI is not set
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=y
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=y
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_IONIC=y
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=y
# CONFIG_QLCNIC is not set
CONFIG_NETXEN_NIC=y
CONFIG_QED=y
CONFIG_QED_LL2=y
CONFIG_QEDE=y
CONFIG_QED_RDMA=y
CONFIG_QED_OOO=y
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=y
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RENESAS is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_EPIC100 is not set
CONFIG_SMSC911X=y
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=y
# CONFIG_STMMAC_SELFTESTS is not set
# CONFIG_STMMAC_PLATFORM is not set
CONFIG_STMMAC_PCI=y
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
CONFIG_CASSINI=y
CONFIG_NIU=y
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=y
# CONFIG_NET_VENDOR_TI is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
CONFIG_VIA_VELOCITY=y
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=y
CONFIG_WIZNET_W5300=y
# CONFIG_WIZNET_BUS_DIRECT is not set
CONFIG_WIZNET_BUS_INDIRECT=y
# CONFIG_WIZNET_BUS_ANY is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_AXI_EMAC is not set
CONFIG_XILINX_LL_TEMAC=y
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=y
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=y
# CONFIG_HIPPI is not set
CONFIG_NET_SB1000=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_BCM_UNIMAC=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_CAVIUM=y
CONFIG_MDIO_GPIO=y
CONFIG_MDIO_MSCC_MIIM=y
CONFIG_MDIO_THUNDER=y
CONFIG_PHYLINK=y
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set
#
# MII PHY device drivers
#
# CONFIG_SFP is not set
CONFIG_ADIN_PHY=y
CONFIG_AMD_PHY=y
CONFIG_AQUANTIA_PHY=y
CONFIG_AX88796B_PHY=y
CONFIG_BCM7XXX_PHY=y
CONFIG_BCM87XX_PHY=y
CONFIG_BCM_NET_PHYLIB=y
CONFIG_BROADCOM_PHY=y
CONFIG_BCM84881_PHY=y
CONFIG_CICADA_PHY=y
# CONFIG_CORTINA_PHY is not set
CONFIG_DAVICOM_PHY=y
CONFIG_DP83822_PHY=y
# CONFIG_DP83TC811_PHY is not set
CONFIG_DP83848_PHY=y
CONFIG_DP83867_PHY=y
CONFIG_DP83869_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_INTEL_XWAY_PHY=y
CONFIG_LSI_ET1011C_PHY=y
# CONFIG_LXT_PHY is not set
CONFIG_MARVELL_PHY=y
CONFIG_MARVELL_10G_PHY=y
# CONFIG_MICREL_PHY is not set
CONFIG_MICROCHIP_PHY=y
CONFIG_MICROCHIP_T1_PHY=y
# CONFIG_MICROSEMI_PHY is not set
CONFIG_NATIONAL_PHY=y
CONFIG_NXP_TJA11XX_PHY=y
# CONFIG_AT803X_PHY is not set
CONFIG_QSEMI_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_RENESAS_PHY=y
CONFIG_ROCKCHIP_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_STE10XP=y
# CONFIG_TERANETICS_PHY is not set
CONFIG_VITESSE_PHY=y
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
CONFIG_PLIP=y
# CONFIG_PPP is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=y
CONFIG_USB_LAN78XX=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
# CONFIG_USB_NET_AX88179_178A is not set
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=y
CONFIG_USB_NET_HUAWEI_CDC_NCM=y
CONFIG_USB_NET_CDC_MBIM=y
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SR9700 is not set
CONFIG_USB_NET_SR9800=y
CONFIG_USB_NET_SMSC75XX=y
# CONFIG_USB_NET_SMSC95XX is not set
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
CONFIG_USB_BELKIN=y
# CONFIG_USB_ARMLINUX is not set
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_NET_CX82310_ETH is not set
CONFIG_USB_NET_KALMIA=y
CONFIG_USB_NET_QMI_WWAN=y
# CONFIG_USB_NET_INT51X1 is not set
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_NET_CH9200=y
CONFIG_USB_NET_AQC111=y
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_VMXNET3=y
# CONFIG_FUJITSU_ES is not set
# CONFIG_USB4_NET is not set
CONFIG_NETDEVSIM=y
CONFIG_NET_FAILOVER=y
CONFIG_ISDN=y
CONFIG_ISDN_CAPI=y
CONFIG_MISDN=y
CONFIG_MISDN_DSP=y
CONFIG_MISDN_L1OIP=y
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=y
CONFIG_MISDN_HFCMULTI=y
# CONFIG_MISDN_HFCUSB is not set
CONFIG_MISDN_AVMFRITZ=y
CONFIG_MISDN_SPEEDFAX=y
CONFIG_MISDN_INFINEON=y
CONFIG_MISDN_W6692=y
CONFIG_MISDN_IPAC=y
CONFIG_MISDN_ISAR=y
CONFIG_NVM=y
# CONFIG_NVM_PBLK is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_LEDS is not set
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_CYAPA=y
CONFIG_MOUSE_ELAN_I2C=y
# CONFIG_MOUSE_ELAN_I2C_I2C is not set
# CONFIG_MOUSE_ELAN_I2C_SMBUS is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_GPIO=y
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_MOUSE_SYNAPTICS_USB=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=y
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
# CONFIG_JOYSTICK_GRIP_MP is not set
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
# CONFIG_JOYSTICK_SIDEWINDER is not set
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
# CONFIG_JOYSTICK_MAGELLAN is not set
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
# CONFIG_JOYSTICK_DB9 is not set
CONFIG_JOYSTICK_GAMECON=y
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_AS5011=y
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=y
# CONFIG_JOYSTICK_XPAD_FF is not set
# CONFIG_JOYSTICK_XPAD_LEDS is not set
# CONFIG_JOYSTICK_PSXPAD_SPI is not set
# CONFIG_JOYSTICK_PXRC is not set
CONFIG_JOYSTICK_FSIA6B=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_PEGASUS=y
CONFIG_TABLET_SERIAL_WACOM4=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_88PM860X is not set
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879_SPI=y
# CONFIG_TOUCHSCREEN_ADC is not set
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
CONFIG_TOUCHSCREEN_BU21013=y
# CONFIG_TOUCHSCREEN_BU21029 is not set
CONFIG_TOUCHSCREEN_CHIPONE_ICN8505=y
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
CONFIG_TOUCHSCREEN_CYTTSP4_SPI=y
CONFIG_TOUCHSCREEN_DA9034=y
# CONFIG_TOUCHSCREEN_DA9052 is not set
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
# CONFIG_TOUCHSCREEN_EETI is not set
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
CONFIG_TOUCHSCREEN_EXC3000=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GOODIX=y
# CONFIG_TOUCHSCREEN_HIDEEP is not set
CONFIG_TOUCHSCREEN_ILI210X=y
CONFIG_TOUCHSCREEN_S6SY761=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_EKTF2127=y
CONFIG_TOUCHSCREEN_ELAN=y
CONFIG_TOUCHSCREEN_ELO=y
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_WACOM_I2C=y
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_MELFAS_MIP4=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
# CONFIG_TOUCHSCREEN_PIXCIR is not set
CONFIG_TOUCHSCREEN_WDT87XX_I2C=y
CONFIG_TOUCHSCREEN_WM831X=y
CONFIG_TOUCHSCREEN_WM97XX=y
CONFIG_TOUCHSCREEN_WM9705=y
# CONFIG_TOUCHSCREEN_WM9712 is not set
CONFIG_TOUCHSCREEN_WM9713=y
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
# CONFIG_TOUCHSCREEN_TSC2004 is not set
CONFIG_TOUCHSCREEN_TSC2005=y
CONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set
CONFIG_TOUCHSCREEN_RM_TS=y
# CONFIG_TOUCHSCREEN_SILEAD is not set
CONFIG_TOUCHSCREEN_SIS_I2C=y
CONFIG_TOUCHSCREEN_ST1232=y
CONFIG_TOUCHSCREEN_STMFTS=y
CONFIG_TOUCHSCREEN_SURFACE3_SPI=y
# CONFIG_TOUCHSCREEN_SX8654 is not set
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_TOUCHSCREEN_ZET6223=y
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_TOUCHSCREEN_IQS5XX=y
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=y
# CONFIG_RMI4_I2C is not set
CONFIG_RMI4_SPI=y
CONFIG_RMI4_SMB=y
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
# CONFIG_RMI4_F54 is not set
# CONFIG_RMI4_F55 is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
# CONFIG_TTY is not set
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_DEV_BUS=y
# CONFIG_PRINTER is not set
CONFIG_PPDEV=y
# CONFIG_IPMI_HANDLER is not set
# CONFIG_IPMB_DEVICE_INTERFACE is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_APPLICOM=y
#
# PCMCIA character devices
#
# CONFIG_CARDMAN_4000 is not set
CONFIG_CARDMAN_4040=y
CONFIG_SCR24X=y
# end of PCMCIA character devices
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_PCIE=y
# end of Character devices
CONFIG_RANDOM_TRUST_CPU=y
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_LTC4306=y
CONFIG_I2C_MUX_PCA9541=y
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_MUX_REG=y
# CONFIG_I2C_MUX_MLXCPLD is not set
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD756_S4882=y
CONFIG_I2C_AMD8111=y
CONFIG_I2C_AMD_MP2=y
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NFORCE2_S4985=y
CONFIG_I2C_NVIDIA_GPU=y
CONFIG_I2C_SIS5595=y
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PCI=y
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
CONFIG_I2C_EMEV2=y
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_SIMTEC is not set
CONFIG_I2C_XILINX=y
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
# CONFIG_I2C_PARPORT is not set
CONFIG_I2C_ROBOTFUZZ_OSIF=y
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIPERBOARD=y
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=y
CONFIG_I2C_CROS_EC_TUNNEL=y
# end of I2C Hardware Bus support
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
# end of I2C support
CONFIG_I3C=y
# CONFIG_CDNS_I3C_MASTER is not set
CONFIG_DW_I3C_MASTER=y
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_AXI_SPI_ENGINE=y
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_BUTTERFLY is not set
CONFIG_SPI_CADENCE=y
# CONFIG_SPI_DESIGNWARE is not set
CONFIG_SPI_NXP_FLEXSPI=y
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_LM70_LLP=y
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_PXA2XX=y
CONFIG_SPI_PXA2XX_PCI=y
# CONFIG_SPI_ROCKCHIP is not set
CONFIG_SPI_SC18IS602=y
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
CONFIG_SPI_XILINX=y
# CONFIG_SPI_ZYNQMP_GQSPI is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
CONFIG_SPI_TLE62X0=y
# CONFIG_SPI_SLAVE is not set
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=y
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_PARPORT=y
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not set
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_CHERRYVIEW=y
# CONFIG_PINCTRL_LYNXPOINT is not set
CONFIG_PINCTRL_INTEL=y
CONFIG_PINCTRL_BROXTON=y
CONFIG_PINCTRL_CANNONLAKE=y
CONFIG_PINCTRL_CEDARFORK=y
CONFIG_PINCTRL_DENVERTON=y
CONFIG_PINCTRL_GEMINILAKE=y
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_LEWISBURG is not set
CONFIG_PINCTRL_SUNRISEPOINT=y
CONFIG_PINCTRL_TIGERLAKE=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_ICH=y
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MENZ127=y
# CONFIG_GPIO_VX855 is not set
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_AMD_FCH=y
# end of Memory mapped GPIO drivers
#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_104_DIO_48E is not set
# CONFIG_GPIO_104_IDIO_16 is not set
# CONFIG_GPIO_104_IDI_48 is not set
CONFIG_GPIO_F7188X=y
# CONFIG_GPIO_GPIO_MM is not set
CONFIG_GPIO_IT87=y
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
CONFIG_GPIO_WS16C48=y
# end of Port-mapped I/O GPIO drivers
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=y
CONFIG_GPIO_ADP5588_IRQ=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_MAX732X_IRQ=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
CONFIG_GPIO_ARIZONA=y
# CONFIG_GPIO_BD9571MWV is not set
# CONFIG_GPIO_DA9052 is not set
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_JANZ_TTL=y
CONFIG_GPIO_LP873X=y
# CONFIG_GPIO_PALMAS is not set
# CONFIG_GPIO_TPS65086 is not set
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TQMX86=y
CONFIG_GPIO_TWL6040=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
# CONFIG_GPIO_WM8994 is not set
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=y
CONFIG_GPIO_BT8XX=y
CONFIG_GPIO_ML_IOH=y
CONFIG_GPIO_PCI_IDIO_16=y
# CONFIG_GPIO_PCIE_IDIO_24 is not set
CONFIG_GPIO_RDC321X=y
# end of PCI GPIO expanders
#
# SPI GPIO expanders
#
CONFIG_GPIO_MAX3191X=y
CONFIG_GPIO_MAX7301=y
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders
#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=y
# end of USB GPIO expanders
CONFIG_GPIO_MOCKUP=y
CONFIG_W1=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y
CONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2405=y
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2805=y
CONFIG_W1_SLAVE_DS2430=y
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2438 is not set
CONFIG_W1_SLAVE_DS250X=y
# CONFIG_W1_SLAVE_DS2780 is not set
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_DS28E17=y
# end of 1-wire Slaves
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
CONFIG_PDA_POWER=y
# CONFIG_GENERIC_ADC_BATTERY is not set
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
# CONFIG_WM8350_POWER is not set
CONFIG_TEST_POWER=y
# CONFIG_BATTERY_88PM860X is not set
CONFIG_CHARGER_ADP5061=y
CONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2781=y
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_WM97XX is not set
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=y
CONFIG_MANAGER_SBS=y
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_DA9030 is not set
# CONFIG_BATTERY_DA9052 is not set
CONFIG_AXP20X_POWER=y
CONFIG_AXP288_FUEL_GAUGE=y
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_MAX1721X=y
# CONFIG_CHARGER_ISP1704 is not set
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_LP8788=y
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_LT3651 is not set
CONFIG_CHARGER_MAX14577=y
CONFIG_CHARGER_MAX77693=y
CONFIG_CHARGER_BQ2415X=y
# CONFIG_CHARGER_BQ24190 is not set
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=y
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_SMB347=y
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_GOLDFISH=y
# CONFIG_BATTERY_RT5033 is not set
CONFIG_CHARGER_RT9455=y
# CONFIG_CHARGER_CROS_USBPD is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7314=y
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM1177=y
CONFIG_SENSORS_ADM9240=y
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_AS370=y
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
CONFIG_SENSORS_APPLESMC=y
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ASPEED=y
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_DRIVETEMP=y
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DELL_SMM=y
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_MC13783_ADC=y
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
# CONFIG_SENSORS_G762 is not set
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_I5500=y
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
CONFIG_SENSORS_POWR1220=y
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LTC2945=y
CONFIG_SENSORS_LTC2947=y
# CONFIG_SENSORS_LTC2947_I2C is not set
CONFIG_SENSORS_LTC2947_SPI=y
CONFIG_SENSORS_LTC2990=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_LTC4260=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX1111=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX31722=y
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_MLXREG_FAN is not set
CONFIG_SENSORS_TC654=y
# CONFIG_SENSORS_MENF21BMC_HWMON is not set
CONFIG_SENSORS_ADCXX=y
CONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=y
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=y
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_NCT7802=y
CONFIG_SENSORS_NCT7904=y
CONFIG_SENSORS_NPCM7XX=y
CONFIG_SENSORS_PCF8591=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
CONFIG_SENSORS_ADM1275=y
CONFIG_SENSORS_BEL_PFE=y
CONFIG_SENSORS_IBM_CFFPS=y
CONFIG_SENSORS_INSPUR_IPSPS=y
CONFIG_SENSORS_IR35221=y
CONFIG_SENSORS_IR38064=y
CONFIG_SENSORS_IRPS5401=y
# CONFIG_SENSORS_ISL68137 is not set
CONFIG_SENSORS_LM25066=y
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_LTC2978_REGULATOR=y
# CONFIG_SENSORS_LTC3815 is not set
CONFIG_SENSORS_MAX16064=y
CONFIG_SENSORS_MAX20730=y
# CONFIG_SENSORS_MAX20751 is not set
CONFIG_SENSORS_MAX31785=y
# CONFIG_SENSORS_MAX34440 is not set
CONFIG_SENSORS_MAX8688=y
CONFIG_SENSORS_PXE1610=y
CONFIG_SENSORS_TPS40422=y
CONFIG_SENSORS_TPS53679=y
CONFIG_SENSORS_UCD9000=y
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_XDPE122=y
CONFIG_SENSORS_ZL6100=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SHT3x=y
CONFIG_SENSORS_SHTC1=y
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
CONFIG_SENSORS_EMC2103=y
# CONFIG_SENSORS_EMC6W201 is not set
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_STTS751=y
CONFIG_SENSORS_SMM665=y
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_ADS7871=y
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_INA209=y
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
CONFIG_SENSORS_TC74=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP103=y
CONFIG_SENSORS_TMP108=y
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TMP513=y
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=y
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83773G=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=y
# CONFIG_SENSORS_WM831X is not set
# CONFIG_SENSORS_WM8350 is not set
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
# CONFIG_THERMAL_HWMON is not set
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_CLOCK_THERMAL=y
CONFIG_DEVFREQ_THERMAL=y
CONFIG_THERMAL_EMULATION=y
#
# Intel thermal drivers
#
CONFIG_INTEL_SOC_DTS_IOSF_CORE=y
CONFIG_INTEL_SOC_DTS_THERMAL=y
#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers
CONFIG_INTEL_PCH_THERMAL=y
# end of Intel thermal drivers
CONFIG_GENERIC_ADC_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_AS3711=y
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_BD9571MWV=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_CROS_EC_DEV=y
# CONFIG_MFD_MADERA is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
# CONFIG_MFD_DA9052_SPI is not set
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
CONFIG_INTEL_SOC_PMIC_CHTDC_TI=y
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
# CONFIG_MFD_INTEL_LPSS_PCI is not set
CONFIG_MFD_JANZ_CMODIO=y
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
CONFIG_MFD_MENF21BMC=y
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_RETU=y
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
CONFIG_MFD_RDC321X=y
CONFIG_MFD_RT5033=y
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_SEC_CORE=y
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
CONFIG_MFD_SKY81452=y
# CONFIG_MFD_SMSC is not set
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
CONFIG_AB3100_OTP=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
# CONFIG_MFD_LP3943 is not set
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=y
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=y
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS68470 is not set
CONFIG_MFD_TI_LP873X=y
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
CONFIG_MFD_TPS80031=y
# CONFIG_TWL4030_CORE is not set
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=y
# CONFIG_MFD_LM3533 is not set
CONFIG_MFD_TQMX86=y
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
# CONFIG_MFD_ARIZONA_I2C is not set
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
# CONFIG_MFD_WM8997 is not set
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
# CONFIG_MFD_WCD934X is not set
# CONFIG_RAVE_SP_CORE is not set
# end of Multifunction device drivers
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
CONFIG_REGULATOR_88PG86X=y
CONFIG_REGULATOR_88PM8607=y
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AB3100=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AXP20X=y
# CONFIG_REGULATOR_BCM590XX is not set
CONFIG_REGULATOR_BD9571MWV=y
CONFIG_REGULATOR_DA903X=y
CONFIG_REGULATOR_DA9052=y
# CONFIG_REGULATOR_DA9055 is not set
# CONFIG_REGULATOR_DA9062 is not set
CONFIG_REGULATOR_DA9210=y
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_GPIO is not set
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=y
# CONFIG_REGULATOR_LM363X is not set
# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_LP8788=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
# CONFIG_REGULATOR_MAX8907 is not set
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=y
# CONFIG_REGULATOR_MAX8997 is not set
# CONFIG_REGULATOR_MAX77693 is not set
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
# CONFIG_REGULATOR_MP8859 is not set
# CONFIG_REGULATOR_MT6311 is not set
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
# CONFIG_REGULATOR_PV88080 is not set
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_RT5033=y
# CONFIG_REGULATOR_S2MPA01 is not set
# CONFIG_REGULATOR_S2MPS11 is not set
# CONFIG_REGULATOR_S5M8767 is not set
CONFIG_REGULATOR_SKY81452=y
# CONFIG_REGULATOR_SLG51000 is not set
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65086=y
# CONFIG_REGULATOR_TPS65132 is not set
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS65912=y
CONFIG_REGULATOR_TPS80031=y
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_WM8994=y
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y
# CONFIG_RC_CORE is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
# CONFIG_MEDIA_CEC_SUPPORT is not set
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_V4L2_I2C=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_V4L2_FWNODE=y
#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
# CONFIG_SDR_PLATFORM_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=y
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
CONFIG_USB_MR800=y
# CONFIG_USB_DSBR is not set
CONFIG_RADIO_MAXIRADIO=y
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
CONFIG_RADIO_TEA5764=y
CONFIG_RADIO_TEA5764_XTAL=y
CONFIG_RADIO_SAA7706H=y
CONFIG_RADIO_TEF6862=y
# CONFIG_RADIO_WL1273 is not set
#
# Texas Instruments WL128x FM driver (ST based)
#
# end of Texas Instruments WL128x FM driver (ST based)
CONFIG_CYPRESS_FIRMWARE=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_V4L2=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_VMALLOC=y
#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
#
# I2C Encoders, decoders, sensors and other helper chips
#
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=y
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
CONFIG_VIDEO_TEA6415C=y
# CONFIG_VIDEO_TEA6420 is not set
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_CS3308=y
CONFIG_VIDEO_CS5345=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_TLV320AIC23B=y
CONFIG_VIDEO_UDA1342=y
CONFIG_VIDEO_WM8775=y
# CONFIG_VIDEO_WM8739 is not set
CONFIG_VIDEO_VP27SMPX=y
CONFIG_VIDEO_SONY_BTF_MPX=y
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=y
#
# Video decoders
#
# CONFIG_VIDEO_ADV7183 is not set
CONFIG_VIDEO_BT819=y
CONFIG_VIDEO_BT856=y
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
CONFIG_VIDEO_ML86V7667=y
# CONFIG_VIDEO_SAA7110 is not set
CONFIG_VIDEO_SAA711X=y
# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=y
CONFIG_VIDEO_TVP7002=y
CONFIG_VIDEO_TW2804=y
CONFIG_VIDEO_TW9903=y
CONFIG_VIDEO_TW9906=y
# CONFIG_VIDEO_TW9910 is not set
# CONFIG_VIDEO_VPX3220 is not set
#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
CONFIG_VIDEO_CX25840=y
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=y
CONFIG_VIDEO_SAA7185=y
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
CONFIG_VIDEO_ADV7343=y
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_AK881X is not set
CONFIG_VIDEO_THS8200=y
#
# Camera sensor devices
#
#
# Lens drivers
#
#
# Flash devices
#
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=y
#
# SDR tuner chips
#
CONFIG_SDR_MAX2175=y
#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
CONFIG_VIDEO_M52790=y
# CONFIG_VIDEO_I2C is not set
# end of I2C Encoders, decoders, sensors and other helper chips
#
# SPI helper chips
#
# end of SPI helper chips
#
# Media SPI Adapters
#
# end of Media SPI Adapters
CONFIG_MEDIA_TUNER=y
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA18250=y
# CONFIG_MEDIA_TUNER_TDA8290 is not set
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MSI001=y
CONFIG_MEDIA_TUNER_MT20XX=y
# CONFIG_MEDIA_TUNER_MT2060 is not set
# CONFIG_MEDIA_TUNER_MT2063 is not set
# CONFIG_MEDIA_TUNER_MT2266 is not set
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
# CONFIG_MEDIA_TUNER_MXL5005S is not set
# CONFIG_MEDIA_TUNER_MXL5007T is not set
CONFIG_MEDIA_TUNER_MC44S803=y
# CONFIG_MEDIA_TUNER_MAX2165 is not set
CONFIG_MEDIA_TUNER_TDA18218=y
CONFIG_MEDIA_TUNER_FC0011=y
# CONFIG_MEDIA_TUNER_FC0012 is not set
CONFIG_MEDIA_TUNER_FC0013=y
CONFIG_MEDIA_TUNER_TDA18212=y
CONFIG_MEDIA_TUNER_E4000=y
CONFIG_MEDIA_TUNER_FC2580=y
# CONFIG_MEDIA_TUNER_M88RS6000T is not set
CONFIG_MEDIA_TUNER_TUA9001=y
CONFIG_MEDIA_TUNER_SI2157=y
# CONFIG_MEDIA_TUNER_IT913X is not set
CONFIG_MEDIA_TUNER_R820T=y
CONFIG_MEDIA_TUNER_MXL301RF=y
CONFIG_MEDIA_TUNER_QM1D1C0042=y
CONFIG_MEDIA_TUNER_QM1D1B0004=y
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Tools to develop new frontends
#
# end of Customise DVB Frontends
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=y
CONFIG_DRM_MIPI_DBI=y
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
CONFIG_DRM_DEBUG_MM=y
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_TTM=y
CONFIG_DRM_TTM_DMA_PAGE_POOL=y
CONFIG_DRM_VRAM_HELPER=y
CONFIG_DRM_TTM_HELPER=y
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_KMS_CMA_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_VM=y
CONFIG_DRM_SCHED=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
CONFIG_DRM_I2C_SIL164=y
CONFIG_DRM_I2C_NXP_TDA998X=y
CONFIG_DRM_I2C_NXP_TDA9950=y
# end of I2C encoder or helper chips
#
# ARM devices
#
# end of ARM devices
CONFIG_DRM_RADEON=y
CONFIG_DRM_RADEON_USERPTR=y
CONFIG_DRM_AMDGPU=y
# CONFIG_DRM_AMDGPU_SI is not set
# CONFIG_DRM_AMDGPU_CIK is not set
# CONFIG_DRM_AMDGPU_USERPTR is not set
# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
#
# ACP (Audio CoProcessor) Configuration
#
CONFIG_DRM_AMD_ACP=y
# end of ACP (Audio CoProcessor) Configuration
#
# Display Engine Configuration
#
CONFIG_DRM_AMD_DC=y
CONFIG_DRM_AMD_DC_DCN=y
# CONFIG_DRM_AMD_DC_HDCP is not set
# CONFIG_DEBUG_KERNEL_DC is not set
# end of Display Engine Configuration
# CONFIG_HSA_AMD is not set
CONFIG_DRM_NOUVEAU=y
# CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT is not set
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_NOUVEAU_DEBUG_MMU=y
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_I915=y
# CONFIG_DRM_I915_ALPHA_SUPPORT is not set
CONFIG_DRM_I915_FORCE_PROBE=""
CONFIG_DRM_I915_CAPTURE_ERROR=y
# CONFIG_DRM_I915_COMPRESS_ERROR is not set
# CONFIG_DRM_I915_USERPTR is not set
# CONFIG_DRM_I915_GVT is not set
#
# drm/i915 Debugging
#
# CONFIG_DRM_I915_WERROR is not set
# CONFIG_DRM_I915_DEBUG is not set
CONFIG_DRM_I915_DEBUG_MMIO=y
# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set
CONFIG_DRM_I915_SW_FENCE_CHECK_DAG=y
CONFIG_DRM_I915_DEBUG_GUC=y
CONFIG_DRM_I915_SELFTEST=y
# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set
CONFIG_DRM_I915_DEBUG_VBLANK_EVADE=y
CONFIG_DRM_I915_DEBUG_RUNTIME_PM=y
# end of drm/i915 Debugging
#
# drm/i915 Profile Guided Optimisation
#
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
CONFIG_DRM_I915_SPIN_REQUEST=5
CONFIG_DRM_I915_STOP_TIMEOUT=100
CONFIG_DRM_I915_TIMESLICE_DURATION=1
# end of drm/i915 Profile Guided Optimisation
# CONFIG_DRM_VGEM is not set
CONFIG_DRM_VKMS=y
CONFIG_DRM_VMWGFX=y
# CONFIG_DRM_VMWGFX_FBCON is not set
CONFIG_DRM_GMA500=y
# CONFIG_DRM_GMA600 is not set
CONFIG_DRM_GMA3600=y
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
CONFIG_DRM_MGAG200=y
CONFIG_DRM_CIRRUS_QEMU=y
CONFIG_DRM_QXL=y
CONFIG_DRM_BOCHS=y
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
CONFIG_DRM_ANALOGIX_ANX78XX=y
CONFIG_DRM_ANALOGIX_DP=y
# end of Display Interface Bridges
CONFIG_DRM_ETNAVIV=y
# CONFIG_DRM_ETNAVIV_THERMAL is not set
CONFIG_DRM_GM12U320=y
CONFIG_TINYDRM_HX8357D=y
# CONFIG_TINYDRM_ILI9225 is not set
CONFIG_TINYDRM_ILI9341=y
CONFIG_TINYDRM_MI0283QT=y
CONFIG_TINYDRM_REPAPER=y
# CONFIG_TINYDRM_ST7586 is not set
CONFIG_TINYDRM_ST7735R=y
CONFIG_DRM_VBOXVIDEO=y
CONFIG_DRM_LEGACY=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_MGA is not set
CONFIG_DRM_SIS=y
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=y
# CONFIG_FB_CYBER2000_DDC is not set
CONFIG_FB_ARC=y
CONFIG_FB_ASILIANT=y
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
CONFIG_FB_OPENCORES=y
CONFIG_FB_S1D13XXX=y
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I740=y
CONFIG_FB_LE80578=y
# CONFIG_FB_CARILLO_RANCH is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
# CONFIG_FB_ATY128_BACKLIGHT is not set
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
# CONFIG_FB_ATY_GX is not set
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=y
# CONFIG_FB_S3_DDC is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
CONFIG_FB_VIA=y
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
CONFIG_FB_VIA_X_COMPATIBILITY=y
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
# CONFIG_FB_3DFX_I2C is not set
CONFIG_FB_VOODOO1=y
# CONFIG_FB_VT8623 is not set
CONFIG_FB_TRIDENT=y
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
CONFIG_FB_CARMINE=y
# CONFIG_FB_CARMINE_DRAM_EVAL is not set
CONFIG_CARMINE_DRAM_CUSTOM=y
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_GOLDFISH=y
CONFIG_FB_VIRTUAL=y
CONFIG_FB_METRONOME=y
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI922X=y
CONFIG_LCD_ILI9320=y
# CONFIG_LCD_TDO24M is not set
CONFIG_LCD_VGG2432A4=y
CONFIG_LCD_PLATFORM=y
CONFIG_LCD_AMS369FG06=y
CONFIG_LCD_LMS501KF03=y
CONFIG_LCD_HX8357=y
CONFIG_LCD_OTM3225A=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_CARILLO_RANCH=y
# CONFIG_BACKLIGHT_DA903X is not set
# CONFIG_BACKLIGHT_DA9052 is not set
CONFIG_BACKLIGHT_MAX8925=y
CONFIG_BACKLIGHT_APPLE=y
CONFIG_BACKLIGHT_QCOM_WLED=y
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP8860=y
# CONFIG_BACKLIGHT_ADP8870 is not set
CONFIG_BACKLIGHT_88PM860X=y
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_SKY81452=y
CONFIG_BACKLIGHT_AS3711=y
# CONFIG_BACKLIGHT_GPIO is not set
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
CONFIG_BACKLIGHT_ARCXCNN=y
# end of Backlight & LCD device support
CONFIG_VGASTATE=y
CONFIG_HDMI=y
# CONFIG_LOGO is not set
# end of Graphics support
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQ_DEVICE=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_PCM_TIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_PROC_FS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
# CONFIG_SND_CTL_VALIDATION is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_SEQ_MIDI_EVENT=y
CONFIG_SND_SEQ_MIDI=y
CONFIG_SND_SEQ_MIDI_EMUL=y
CONFIG_SND_SEQ_VIRMIDI=y
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_OPL3_LIB_SEQ=y
CONFIG_SND_VX_LIB=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
CONFIG_SND_ALOOP=y
CONFIG_SND_VIRMIDI=y
CONFIG_SND_MTPAV=y
CONFIG_SND_MTS64=y
CONFIG_SND_SERIAL_U16550=y
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PORTMAN2X4=y
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
CONFIG_SND_ALS300=y
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=y
# CONFIG_SND_ASIHPI is not set
CONFIG_SND_ATIIXP=y
# CONFIG_SND_ATIIXP_MODEM is not set
CONFIG_SND_AU8810=y
CONFIG_SND_AU8820=y
CONFIG_SND_AU8830=y
CONFIG_SND_AW2=y
CONFIG_SND_AZT3328=y
CONFIG_SND_BT87X=y
# CONFIG_SND_BT87X_OVERCLOCK is not set
# CONFIG_SND_CA0106 is not set
CONFIG_SND_CMIPCI=y
CONFIG_SND_OXYGEN_LIB=y
CONFIG_SND_OXYGEN=y
CONFIG_SND_CS4281=y
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CTXFI is not set
CONFIG_SND_DARLA20=y
CONFIG_SND_GINA20=y
# CONFIG_SND_LAYLA20 is not set
CONFIG_SND_DARLA24=y
CONFIG_SND_GINA24=y
# CONFIG_SND_LAYLA24 is not set
CONFIG_SND_MONA=y
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
CONFIG_SND_INDIGO=y
CONFIG_SND_INDIGOIO=y
CONFIG_SND_INDIGODJ=y
CONFIG_SND_INDIGOIOX=y
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
CONFIG_SND_EMU10K1X=y
CONFIG_SND_ENS1370=y
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=y
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
CONFIG_SND_FM801=y
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_HDSP=y
#
# Don't forget to add built-in firmwares for HDSP driver
#
CONFIG_SND_HDSPM=y
CONFIG_SND_ICE1712=y
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
CONFIG_SND_KORG1212=y
CONFIG_SND_LOLA=y
# CONFIG_SND_LX6464ES is not set
CONFIG_SND_MAESTRO3=y
# CONFIG_SND_MAESTRO3_INPUT is not set
CONFIG_SND_MIXART=y
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=y
CONFIG_SND_RIPTIDE=y
CONFIG_SND_RME32=y
CONFIG_SND_RME96=y
# CONFIG_SND_RME9652 is not set
CONFIG_SND_SONICVIBES=y
CONFIG_SND_TRIDENT=y
CONFIG_SND_VIA82XX=y
CONFIG_SND_VIA82XX_MODEM=y
CONFIG_SND_VIRTUOSO=y
# CONFIG_SND_VX222 is not set
CONFIG_SND_YMFPCI=y
#
# HD-Audio
#
CONFIG_SND_HDA=y
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
CONFIG_SND_HDA_CODEC_CA0132=y
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# end of HD-Audio
CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=0
CONFIG_SND_INTEL_NHLT=y
CONFIG_SND_INTEL_DSP_CONFIG=y
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_FIREWIRE is not set
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=y
CONFIG_SND_PDAUDIOCF=y
# CONFIG_SND_SOC is not set
# CONFIG_SND_X86 is not set
CONFIG_AC97_BUS=y
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set
CONFIG_UHID=y
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=y
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=y
# CONFIG_HID_ASUS is not set
CONFIG_HID_AUREAL=y
CONFIG_HID_BELKIN=y
CONFIG_HID_BETOP_FF=y
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CORSAIR=y
CONFIG_HID_COUGAR=y
# CONFIG_HID_MACALLY is not set
CONFIG_HID_PRODIKEYS=y
# CONFIG_HID_CMEDIA is not set
CONFIG_HID_CREATIVE_SB0540=y
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
CONFIG_HID_ELECOM=y
CONFIG_HID_ELO=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GEMBIRD=y
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GOOGLE_HAMMER is not set
CONFIG_HID_GT683R=y
CONFIG_HID_KEYTOUCH=y
# CONFIG_HID_KYE is not set
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=y
CONFIG_HID_VIEWSONIC=y
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
CONFIG_HID_ITE=y
CONFIG_HID_JABRA=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
CONFIG_HID_LED=y
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NTI=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
CONFIG_HID_PICOLCD_FB=y
# CONFIG_HID_PICOLCD_BACKLIGHT is not set
# CONFIG_HID_PICOLCD_LCD is not set
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PLANTRONICS=y
# CONFIG_HID_PRIMAX is not set
CONFIG_HID_RETRODE=y
# CONFIG_HID_ROCCAT is not set
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=y
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_RMI=y
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
# CONFIG_HID_SMARTJOYPLUS is not set
CONFIG_HID_TIVO=y
CONFIG_HID_TOPSEED=y
# CONFIG_HID_THINGM is not set
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_UDRAW_PS3=y
CONFIG_HID_WACOM=y
CONFIG_HID_WIIMOTE=y
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=y
# CONFIG_HID_ALPS is not set
# end of Special HID drivers
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
# end of USB HID support
#
# I2C HID support
#
CONFIG_I2C_HID=y
# end of I2C HID support
#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
# end of Intel ISH HID support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=y
CONFIG_USB_CONN_GPIO=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_PCI is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_FOTG210_HCD=y
CONFIG_USB_MAX3421_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_SSB=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HCD_BCMA is not set
CONFIG_USB_HCD_SSB=y
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y
# CONFIG_USBIP_CORE is not set
CONFIG_USB_CDNS3=y
# CONFIG_USB_CDNS3_GADGET is not set
# CONFIG_USB_CDNS3_HOST is not set
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not set
CONFIG_USB_MUSB_GADGET=y
# CONFIG_USB_MUSB_DUAL_ROLE is not set
#
# Platform Glue Layer
#
#
# MUSB DMA mode
#
# CONFIG_MUSB_PIO_ONLY is not set
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_ULPI is not set
CONFIG_USB_DWC3_HOST=y
# CONFIG_USB_DWC3_GADGET is not set
# CONFIG_USB_DWC3_DUAL_ROLE is not set
#
# Platform Glue Driver Support
#
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_HOST=y
#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PERIPHERAL is not set
# CONFIG_USB_DWC2_DUAL_ROLE is not set
# CONFIG_USB_DWC2_DEBUG is not set
CONFIG_USB_DWC2_TRACK_MISSED_SOFS=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
CONFIG_USB_USS720=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=y
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
CONFIG_USB_EHSET_TEST_FIXTURE=y
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_YUREX=y
# CONFIG_USB_EZUSB_FX2 is not set
CONFIG_USB_HUB_USB251XB=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_HSIC_USB4604=y
# CONFIG_USB_LINK_LAYER_TEST is not set
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_TAHVO_USB=y
CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y
CONFIG_USB_ISP1301=y
# end of USB Physical Layer drivers
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_VERBOSE=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
#
# USB Peripheral Controller
#
CONFIG_USB_FOTG210_UDC=y
CONFIG_USB_GR_UDC=y
# CONFIG_USB_R8A66597 is not set
CONFIG_USB_PXA27X=y
CONFIG_USB_MV_UDC=y
# CONFIG_USB_MV_U3D is not set
CONFIG_USB_M66592=y
CONFIG_USB_BDC_UDC=y
#
# Platform Support
#
CONFIG_USB_NET2272=y
CONFIG_USB_NET2272_DMA=y
# CONFIG_USB_DUMMY_HCD is not set
# end of USB Peripheral Controller
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_U_ETHER=y
CONFIG_USB_U_AUDIO=y
CONFIG_USB_F_ECM=y
CONFIG_USB_F_EEM=y
CONFIG_USB_F_RNDIS=y
CONFIG_USB_F_FS=y
CONFIG_USB_F_UAC1=y
CONFIG_USB_F_UAC1_LEGACY=y
CONFIG_USB_F_UVC=y
CONFIG_USB_F_HID=y
CONFIG_USB_F_PRINTER=y
CONFIG_USB_CONFIGFS=y
# CONFIG_USB_CONFIGFS_NCM is not set
CONFIG_USB_CONFIGFS_ECM=y
# CONFIG_USB_CONFIGFS_ECM_SUBSET is not set
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
# CONFIG_USB_CONFIGFS_MASS_STORAGE is not set
# CONFIG_USB_CONFIGFS_F_LB_SS is not set
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_CONFIGFS_F_UAC1=y
CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y
# CONFIG_USB_CONFIGFS_F_UAC2 is not set
# CONFIG_USB_CONFIGFS_F_MIDI is not set
CONFIG_USB_CONFIGFS_F_HID=y
CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_USB_CONFIGFS_F_PRINTER=y
CONFIG_TYPEC=y
CONFIG_TYPEC_TCPM=y
# CONFIG_TYPEC_TCPCI is not set
# CONFIG_TYPEC_FUSB302 is not set
# CONFIG_TYPEC_UCSI is not set
CONFIG_TYPEC_HD3SS3220=y
CONFIG_TYPEC_TPS6598X=y
#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
CONFIG_TYPEC_MUX_PI3USB30532=y
# end of USB Type-C Multiplexer/DeMultiplexer Switch support
#
# USB Type-C Alternate Mode drivers
#
# CONFIG_TYPEC_DP_ALTMODE is not set
# end of USB Type-C Alternate Mode drivers
CONFIG_USB_ROLE_SWITCH=y
CONFIG_USB_ROLES_INTEL_XHCI=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_TEST=y
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
# CONFIG_MMC_SDHCI_ACPI is not set
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_F_SDH30=y
CONFIG_MMC_WBSD=y
# CONFIG_MMC_ALCOR is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_GOLDFISH=y
CONFIG_MMC_SPI=y
CONFIG_MMC_SDRICOH_CS=y
# CONFIG_MMC_CB710 is not set
CONFIG_MMC_VIA_SDMMC=y
# CONFIG_MMC_VUB300 is not set
CONFIG_MMC_USHC=y
CONFIG_MMC_USDHI6ROL0=y
CONFIG_MMC_CQHCI=y
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
CONFIG_MMC_SDHCI_XENON=y
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_APU=y
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
CONFIG_LEDS_LM3642=y
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP55XX_COMMON=y
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8501=y
CONFIG_LEDS_LP8788=y
CONFIG_LEDS_CLEVO_MAIL=y
# CONFIG_LEDS_PCA955X is not set
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_WM8350=y
# CONFIG_LEDS_DA903X is not set
CONFIG_LEDS_DA9052=y
CONFIG_LEDS_DAC124S085=y
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
# CONFIG_LEDS_INTEL_SS4200 is not set
CONFIG_LEDS_MC13783=y
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
CONFIG_LEDS_MAX8997=y
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_MENF21BMC is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
CONFIG_LEDS_MLXCPLD=y
# CONFIG_LEDS_MLXREG is not set
CONFIG_LEDS_USER=y
CONFIG_LEDS_NIC78BX=y
CONFIG_LEDS_TI_LMU_COMMON=y
# CONFIG_LEDS_LM36274 is not set
CONFIG_LEDS_TPS6105X=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=y
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
CONFIG_LEDS_TRIGGER_NETDEV=y
CONFIG_LEDS_TRIGGER_PATTERN=y
CONFIG_LEDS_TRIGGER_AUDIO=y
CONFIG_ACCESSIBILITY=y
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
# CONFIG_INFINIBAND_USER_ACCESS is not set
# CONFIG_INFINIBAND_ADDR_TRANS is not set
CONFIG_INFINIBAND_MTHCA=y
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
# CONFIG_INFINIBAND_QIB is not set
# CONFIG_MLX4_INFINIBAND is not set
CONFIG_INFINIBAND_OCRDMA=y
CONFIG_INFINIBAND_VMWARE_PVRDMA=y
CONFIG_INFINIBAND_HFI1=y
# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set
CONFIG_SDMA_VERBOSITY=y
CONFIG_INFINIBAND_QEDR=y
CONFIG_INFINIBAND_RDMAVT=y
# CONFIG_RDMA_RXE is not set
# CONFIG_RDMA_SIW is not set
# CONFIG_INFINIBAND_IPOIB is not set
CONFIG_INFINIBAND_OPA_VNIC=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_E752X=y
CONFIG_EDAC_I82975X=y
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
CONFIG_EDAC_IE31200=y
CONFIG_EDAC_X38=y
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I5000=y
CONFIG_EDAC_I5100=y
# CONFIG_EDAC_I7300 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
CONFIG_INTEL_IDMA64=y
CONFIG_INTEL_IDXD=y
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_INTEL_MIC_X100_DMA is not set
CONFIG_PLX_DMA=y
CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_DW_DMAC_PCI=y
CONFIG_DW_EDMA=y
# CONFIG_DW_EDMA_PCIE is not set
CONFIG_SF_PDMA=y
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
CONFIG_UDMABUF=y
CONFIG_DMABUF_SELFTESTS=y
CONFIG_DMABUF_HEAPS=y
# CONFIG_DMABUF_HEAPS_SYSTEM is not set
# CONFIG_DMABUF_HEAPS_CMA is not set
# end of DMABUF options
CONFIG_AUXDISPLAY=y
CONFIG_HD44780=y
# CONFIG_KS0108 is not set
CONFIG_IMG_ASCII_LCD=y
CONFIG_PARPORT_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
# CONFIG_CHARLCD_BL_OFF is not set
CONFIG_CHARLCD_BL_ON=y
# CONFIG_CHARLCD_BL_FLASH is not set
# CONFIG_PANEL is not set
CONFIG_CHARLCD=y
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=y
CONFIG_UIO_SERCOS3=y
# CONFIG_UIO_PCI_GENERIC is not set
CONFIG_UIO_NETX=y
CONFIG_UIO_PRUSS=y
# CONFIG_UIO_MF624 is not set
CONFIG_VFIO_IOMMU_TYPE1=y
CONFIG_VFIO=y
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_MDEV=y
CONFIG_VFIO_MDEV_DEVICE=y
CONFIG_VIRT_DRIVERS=y
CONFIG_VBOXGUEST=y
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACPI_WMI=y
CONFIG_WMI_BMOF=y
# CONFIG_ALIENWARE_WMI is not set
# CONFIG_HUAWEI_WMI is not set
CONFIG_INTEL_WMI_THUNDERBOLT=y
CONFIG_MXM_WMI=y
CONFIG_PEAQ_WMI=y
CONFIG_XIAOMI_WMI=y
CONFIG_ACERHDF=y
CONFIG_ACER_WIRELESS=y
CONFIG_ACER_WMI=y
# CONFIG_APPLE_GMUX is not set
# CONFIG_ASUS_LAPTOP is not set
CONFIG_ASUS_WIRELESS=y
CONFIG_DCDBAS=y
CONFIG_DELL_SMBIOS=y
CONFIG_DELL_SMBIOS_WMI=y
# CONFIG_DELL_SMBIOS_SMM is not set
CONFIG_DELL_LAPTOP=y
# CONFIG_DELL_RBU is not set
CONFIG_DELL_SMO8800=y
CONFIG_DELL_WMI=y
CONFIG_DELL_WMI_DESCRIPTOR=y
# CONFIG_DELL_WMI_AIO is not set
CONFIG_DELL_WMI_LED=y
CONFIG_FUJITSU_LAPTOP=y
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_GPD_POCKET_FAN is not set
# CONFIG_HP_ACCEL is not set
CONFIG_HP_WIRELESS=y
CONFIG_HP_WMI=y
# CONFIG_IBM_RTL is not set
CONFIG_SENSORS_HDAPS=y
CONFIG_THINKPAD_ACPI=y
# CONFIG_THINKPAD_ACPI_ALSA_SUPPORT is not set
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
# CONFIG_THINKPAD_ACPI_VIDEO is not set
# CONFIG_THINKPAD_ACPI_HOTKEY_POLL is not set
# CONFIG_INTEL_ATOMISP2_PM is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_INT0002_VGPIO is not set
CONFIG_INTEL_MENLOW=y
# CONFIG_INTEL_VBTN is not set
CONFIG_SURFACE3_WMI=y
CONFIG_SURFACE_PRO3_BUTTON=y
CONFIG_MSI_WMI=y
CONFIG_SAMSUNG_LAPTOP=y
CONFIG_SAMSUNG_Q10=y
CONFIG_ACPI_TOSHIBA=y
CONFIG_TOSHIBA_BT_RFKILL=y
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=y
CONFIG_LG_LAPTOP=y
CONFIG_PANASONIC_LAPTOP=y
# CONFIG_SYSTEM76_ACPI is not set
CONFIG_TOPSTAR_LAPTOP=y
# CONFIG_I2C_MULTI_INSTANTIATE is not set
CONFIG_MLX_PLATFORM=y
CONFIG_INTEL_IPS=y
CONFIG_INTEL_RST=y
CONFIG_INTEL_SMARTCONNECT=y
#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support
# CONFIG_INTEL_UNCORE_FREQ_CONTROL is not set
CONFIG_INTEL_CHTDC_TI_PWRBTN=y
CONFIG_INTEL_PMC_CORE=y
# CONFIG_INTEL_PMC_IPC is not set
CONFIG_INTEL_PUNIT_IPC=y
CONFIG_PMC_ATOM=y
# CONFIG_GOLDFISH_PIPE is not set
CONFIG_MFD_CROS_EC=y
CONFIG_CHROME_PLATFORMS=y
# CONFIG_CHROMEOS_LAPTOP is not set
CONFIG_CHROMEOS_PSTORE=y
CONFIG_CHROMEOS_TBMC=y
CONFIG_CROS_EC=y
# CONFIG_CROS_EC_I2C is not set
CONFIG_CROS_EC_SPI=y
# CONFIG_CROS_EC_LPC is not set
CONFIG_CROS_EC_PROTO=y
# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
# CONFIG_CROS_EC_CHARDEV is not set
CONFIG_CROS_EC_LIGHTBAR=y
# CONFIG_CROS_EC_DEBUGFS is not set
CONFIG_CROS_EC_SENSORHUB=y
CONFIG_CROS_EC_SYSFS=y
CONFIG_CROS_USBPD_NOTIFY=y
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=y
CONFIG_MLXREG_IO=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
CONFIG_COMMON_CLK_WM831X=y
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI544=y
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_CS2000_CP=y
CONFIG_COMMON_CLK_S2MPS11=y
CONFIG_CLK_TWL6040=y
CONFIG_COMMON_CLK_PALMAS=y
# end of Common Clock Framework
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support
CONFIG_IOMMU_DEBUGFS=y
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_DMA=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_V2 is not set
CONFIG_AMD_IOMMU_DEBUGFS=y
# CONFIG_INTEL_IOMMU is not set
# CONFIG_IRQ_REMAP is not set
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Aspeed SoC drivers
#
# end of Aspeed SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
CONFIG_SOC_TI=y
#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
# CONFIG_EXTCON_AXP288 is not set
CONFIG_EXTCON_FSA9480=y
CONFIG_EXTCON_GPIO=y
# CONFIG_EXTCON_INTEL_INT3496 is not set
CONFIG_EXTCON_MAX14577=y
# CONFIG_EXTCON_MAX3355 is not set
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_MAX8997=y
# CONFIG_EXTCON_PALMAS is not set
# CONFIG_EXTCON_PTN5150 is not set
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_CROS_EC=y
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
# CONFIG_IIO_BUFFER_HW_CONSUMER is not set
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
# CONFIG_IIO_SW_DEVICE is not set
CONFIG_IIO_SW_TRIGGER=y
#
# Accelerometers
#
# CONFIG_ADIS16201 is not set
CONFIG_ADIS16209=y
CONFIG_ADXL345=y
CONFIG_ADXL345_I2C=y
CONFIG_ADXL345_SPI=y
CONFIG_ADXL372=y
CONFIG_ADXL372_SPI=y
CONFIG_ADXL372_I2C=y
CONFIG_BMA180=y
CONFIG_BMA220=y
# CONFIG_BMA400 is not set
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_BMC150_ACCEL_SPI=y
CONFIG_DA280=y
# CONFIG_DA311 is not set
CONFIG_DMARD09=y
CONFIG_DMARD10=y
# CONFIG_HID_SENSOR_ACCEL_3D is not set
CONFIG_IIO_CROS_EC_ACCEL_LEGACY=y
CONFIG_KXSD9=y
CONFIG_KXSD9_SPI=y
CONFIG_KXSD9_I2C=y
# CONFIG_KXCJK1013 is not set
CONFIG_MC3230=y
# CONFIG_MMA7455_I2C is not set
# CONFIG_MMA7455_SPI is not set
CONFIG_MMA7660=y
# CONFIG_MMA8452 is not set
CONFIG_MMA9551_CORE=y
# CONFIG_MMA9551 is not set
CONFIG_MMA9553=y
# CONFIG_MXC4005 is not set
# CONFIG_MXC6255 is not set
# CONFIG_SCA3000 is not set
CONFIG_STK8312=y
CONFIG_STK8BA50=y
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
CONFIG_AD7091R5=y
CONFIG_AD7124=y
# CONFIG_AD7266 is not set
CONFIG_AD7291=y
# CONFIG_AD7292 is not set
CONFIG_AD7298=y
# CONFIG_AD7476 is not set
CONFIG_AD7606=y
CONFIG_AD7606_IFACE_PARALLEL=y
CONFIG_AD7606_IFACE_SPI=y
# CONFIG_AD7766 is not set
CONFIG_AD7768_1=y
CONFIG_AD7780=y
CONFIG_AD7791=y
CONFIG_AD7793=y
# CONFIG_AD7887 is not set
CONFIG_AD7923=y
# CONFIG_AD7949 is not set
# CONFIG_AD799X is not set
# CONFIG_AXP20X_ADC is not set
CONFIG_AXP288_ADC=y
CONFIG_CC10001_ADC=y
# CONFIG_HI8435 is not set
CONFIG_HX711=y
# CONFIG_INA2XX_ADC is not set
CONFIG_LP8788_ADC=y
CONFIG_LTC2471=y
CONFIG_LTC2485=y
CONFIG_LTC2496=y
CONFIG_LTC2497=y
CONFIG_MAX1027=y
CONFIG_MAX11100=y
# CONFIG_MAX1118 is not set
# CONFIG_MAX1363 is not set
CONFIG_MAX9611=y
CONFIG_MCP320X=y
# CONFIG_MCP3422 is not set
# CONFIG_MCP3911 is not set
# CONFIG_MEN_Z188_ADC is not set
CONFIG_NAU7802=y
# CONFIG_PALMAS_GPADC is not set
CONFIG_STX104=y
# CONFIG_TI_ADC081C is not set
# CONFIG_TI_ADC0832 is not set
CONFIG_TI_ADC084S021=y
CONFIG_TI_ADC12138=y
CONFIG_TI_ADC108S102=y
CONFIG_TI_ADC128S052=y
# CONFIG_TI_ADC161S626 is not set
CONFIG_TI_ADS1015=y
CONFIG_TI_ADS7950=y
# CONFIG_TI_AM335X_ADC is not set
CONFIG_TI_TLC4541=y
CONFIG_VIPERBOARD_ADC=y
# CONFIG_XILINX_XADC is not set
# end of Analog to digital converters
#
# Analog Front Ends
#
# end of Analog Front Ends
#
# Amplifiers
#
CONFIG_AD8366=y
# end of Amplifiers
#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=y
# CONFIG_BME680 is not set
# CONFIG_CCS811 is not set
# CONFIG_IAQCORE is not set
# CONFIG_PMS7003 is not set
CONFIG_SENSIRION_SGP30=y
CONFIG_SPS30=y
CONFIG_VZ89X=y
# end of Chemical Sensors
CONFIG_IIO_CROS_EC_SENSORS_CORE=y
CONFIG_IIO_CROS_EC_SENSORS=y
CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE=y
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=y
CONFIG_HID_SENSOR_IIO_TRIGGER=y
# end of Hid Sensor IIO Common
CONFIG_IIO_MS_SENSORS_I2C=y
#
# SSP Sensor Common
#
# CONFIG_IIO_SSP_SENSORHUB is not set
# end of SSP Sensor Common
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Digital to analog converters
#
CONFIG_AD5064=y
CONFIG_AD5360=y
# CONFIG_AD5380 is not set
# CONFIG_AD5421 is not set
CONFIG_AD5446=y
CONFIG_AD5449=y
CONFIG_AD5592R_BASE=y
CONFIG_AD5592R=y
# CONFIG_AD5593R is not set
CONFIG_AD5504=y
CONFIG_AD5624R_SPI=y
CONFIG_LTC1660=y
CONFIG_LTC2632=y
CONFIG_AD5686=y
CONFIG_AD5686_SPI=y
CONFIG_AD5696_I2C=y
# CONFIG_AD5755 is not set
# CONFIG_AD5758 is not set
CONFIG_AD5761=y
CONFIG_AD5764=y
# CONFIG_AD5791 is not set
# CONFIG_AD7303 is not set
# CONFIG_CIO_DAC is not set
CONFIG_AD8801=y
# CONFIG_DS4424 is not set
# CONFIG_M62332 is not set
CONFIG_MAX517=y
CONFIG_MCP4725=y
# CONFIG_MCP4922 is not set
CONFIG_TI_DAC082S085=y
# CONFIG_TI_DAC5571 is not set
CONFIG_TI_DAC7311=y
CONFIG_TI_DAC7612=y
# end of Digital to analog converters
#
# IIO dummy driver
#
# end of IIO dummy driver
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
CONFIG_AD9523=y
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=y
CONFIG_ADF4371=y
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=y
CONFIG_ADIS16130=y
CONFIG_ADIS16136=y
CONFIG_ADIS16260=y
# CONFIG_ADXRS450 is not set
CONFIG_BMG160=y
CONFIG_BMG160_I2C=y
CONFIG_BMG160_SPI=y
# CONFIG_FXAS21002C is not set
CONFIG_HID_SENSOR_GYRO_3D=y
# CONFIG_MPU3050_I2C is not set
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_IIO_ST_GYRO_SPI_3AXIS=y
CONFIG_ITG3200=y
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#
CONFIG_AFE4403=y
CONFIG_AFE4404=y
CONFIG_MAX30100=y
CONFIG_MAX30102=y
# end of Heart Rate Monitors
# end of Health Sensors
#
# Humidity sensors
#
CONFIG_AM2315=y
CONFIG_DHT11=y
# CONFIG_HDC100X is not set
CONFIG_HID_SENSOR_HUMIDITY=y
CONFIG_HTS221=y
CONFIG_HTS221_I2C=y
CONFIG_HTS221_SPI=y
CONFIG_HTU21=y
# CONFIG_SI7005 is not set
# CONFIG_SI7020 is not set
# end of Humidity sensors
#
# Inertial measurement units
#
CONFIG_ADIS16400=y
# CONFIG_ADIS16460 is not set
CONFIG_ADIS16480=y
# CONFIG_BMI160_I2C is not set
# CONFIG_BMI160_SPI is not set
CONFIG_FXOS8700=y
# CONFIG_FXOS8700_I2C is not set
CONFIG_FXOS8700_SPI=y
# CONFIG_KMX61 is not set
CONFIG_INV_MPU6050_IIO=y
CONFIG_INV_MPU6050_I2C=y
CONFIG_INV_MPU6050_SPI=y
# CONFIG_IIO_ST_LSM6DSX is not set
# end of Inertial measurement units
CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y
#
# Light sensors
#
CONFIG_ACPI_ALS=y
# CONFIG_ADJD_S311 is not set
CONFIG_ADUX1020=y
CONFIG_AL3320A=y
CONFIG_APDS9300=y
# CONFIG_APDS9960 is not set
# CONFIG_BH1750 is not set
# CONFIG_BH1780 is not set
CONFIG_CM32181=y
CONFIG_CM3232=y
# CONFIG_CM3323 is not set
CONFIG_CM36651=y
CONFIG_IIO_CROS_EC_LIGHT_PROX=y
CONFIG_GP2AP020A00F=y
# CONFIG_SENSORS_ISL29018 is not set
CONFIG_SENSORS_ISL29028=y
CONFIG_ISL29125=y
CONFIG_HID_SENSOR_ALS=y
# CONFIG_HID_SENSOR_PROX is not set
CONFIG_JSA1212=y
# CONFIG_RPR0521 is not set
CONFIG_LTR501=y
CONFIG_LV0104CS=y
# CONFIG_MAX44000 is not set
# CONFIG_MAX44009 is not set
CONFIG_NOA1305=y
CONFIG_OPT3001=y
CONFIG_PA12203001=y
# CONFIG_SI1133 is not set
# CONFIG_SI1145 is not set
CONFIG_STK3310=y
CONFIG_ST_UVIS25=y
CONFIG_ST_UVIS25_I2C=y
CONFIG_ST_UVIS25_SPI=y
CONFIG_TCS3414=y
# CONFIG_TCS3472 is not set
# CONFIG_SENSORS_TSL2563 is not set
CONFIG_TSL2583=y
CONFIG_TSL2772=y
# CONFIG_TSL4531 is not set
CONFIG_US5182D=y
# CONFIG_VCNL4000 is not set
# CONFIG_VCNL4035 is not set
CONFIG_VEML6030=y
# CONFIG_VEML6070 is not set
CONFIG_VL6180=y
# CONFIG_ZOPT2201 is not set
# end of Light sensors
#
# Magnetometer sensors
#
CONFIG_AK8975=y
CONFIG_AK09911=y
# CONFIG_BMC150_MAGN_I2C is not set
# CONFIG_BMC150_MAGN_SPI is not set
CONFIG_MAG3110=y
CONFIG_HID_SENSOR_MAGNETOMETER_3D=y
# CONFIG_MMC35240 is not set
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_IIO_ST_MAGN_SPI_3AXIS=y
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
CONFIG_SENSORS_HMC5843_SPI=y
CONFIG_SENSORS_RM3100=y
CONFIG_SENSORS_RM3100_I2C=y
CONFIG_SENSORS_RM3100_SPI=y
# end of Magnetometer sensors
#
# Multiplexers
#
# end of Multiplexers
#
# Inclinometer sensors
#
# CONFIG_HID_SENSOR_INCLINOMETER_3D is not set
# CONFIG_HID_SENSOR_DEVICE_ROTATION is not set
# end of Inclinometer sensors
#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=y
CONFIG_IIO_INTERRUPT_TRIGGER=y
# CONFIG_IIO_TIGHTLOOP_TRIGGER is not set
CONFIG_IIO_SYSFS_TRIGGER=y
# end of Triggers - standalone
#
# Digital potentiometers
#
CONFIG_AD5272=y
CONFIG_DS1803=y
# CONFIG_MAX5432 is not set
CONFIG_MAX5481=y
CONFIG_MAX5487=y
CONFIG_MCP4018=y
# CONFIG_MCP4131 is not set
CONFIG_MCP4531=y
# CONFIG_MCP41010 is not set
CONFIG_TPL0102=y
# end of Digital potentiometers
#
# Digital potentiostats
#
# CONFIG_LMP91000 is not set
# end of Digital potentiostats
#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
CONFIG_BMP280=y
CONFIG_BMP280_I2C=y
CONFIG_BMP280_SPI=y
CONFIG_IIO_CROS_EC_BARO=y
CONFIG_DLHL60D=y
CONFIG_DPS310=y
# CONFIG_HID_SENSOR_PRESS is not set
# CONFIG_HP03 is not set
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
CONFIG_MPL115_SPI=y
CONFIG_MPL3115=y
CONFIG_MS5611=y
# CONFIG_MS5611_I2C is not set
CONFIG_MS5611_SPI=y
CONFIG_MS5637=y
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
CONFIG_IIO_ST_PRESS_SPI=y
CONFIG_T5403=y
CONFIG_HP206C=y
# CONFIG_ZPA2326 is not set
# end of Pressure sensors
#
# Lightning sensors
#
CONFIG_AS3935=y
# end of Lightning sensors
#
# Proximity and distance sensors
#
CONFIG_ISL29501=y
CONFIG_LIDAR_LITE_V2=y
CONFIG_MB1232=y
# CONFIG_PING is not set
# CONFIG_RFD77402 is not set
# CONFIG_SRF04 is not set
CONFIG_SX9500=y
CONFIG_SRF08=y
# CONFIG_VL53L0X_I2C is not set
# end of Proximity and distance sensors
#
# Resolver to digital converters
#
# CONFIG_AD2S90 is not set
CONFIG_AD2S1200=y
# end of Resolver to digital converters
#
# Temperature sensors
#
# CONFIG_LTC2983 is not set
CONFIG_MAXIM_THERMOCOUPLE=y
CONFIG_HID_SENSOR_TEMP=y
CONFIG_MLX90614=y
CONFIG_MLX90632=y
CONFIG_TMP006=y
CONFIG_TMP007=y
CONFIG_TSYS01=y
CONFIG_TSYS02D=y
CONFIG_MAX31856=y
# end of Temperature sensors
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
# end of IRQ chip support
CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_BRCMSTB_RESCAL=y
CONFIG_RESET_TI_SYSCON=y
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
CONFIG_PHY_CPCAP_USB=y
CONFIG_PHY_QCOM_USB_HS=y
CONFIG_PHY_QCOM_USB_HSIC=y
# CONFIG_PHY_SAMSUNG_USB2 is not set
CONFIG_PHY_TUSB1210=y
CONFIG_PHY_INTEL_EMMC=y
# end of PHY Subsystem
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL_CORE=y
CONFIG_INTEL_RAPL=y
# CONFIG_IDLE_INJECT is not set
CONFIG_MCB=y
CONFIG_MCB_PCI=y
CONFIG_MCB_LPC=y
#
# Performance monitor support
#
# end of Performance monitor support
CONFIG_RAS=y
CONFIG_USB4=y
#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android
CONFIG_LIBNVDIMM=y
CONFIG_BLK_DEV_PMEM=y
# CONFIG_ND_BLK is not set
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=y
CONFIG_BTT=y
CONFIG_DAX_DRIVER=y
CONFIG_DAX=y
CONFIG_DEV_DAX=y
CONFIG_DEV_DAX_KMEM=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
#
# HW tracing support
#
CONFIG_STM=y
CONFIG_STM_PROTO_BASIC=y
CONFIG_STM_PROTO_SYS_T=y
CONFIG_STM_DUMMY=y
CONFIG_STM_SOURCE_CONSOLE=y
CONFIG_STM_SOURCE_HEARTBEAT=y
CONFIG_INTEL_TH=y
CONFIG_INTEL_TH_PCI=y
CONFIG_INTEL_TH_ACPI=y
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_STH=y
# CONFIG_INTEL_TH_MSU is not set
# CONFIG_INTEL_TH_PTI is not set
CONFIG_INTEL_TH_DEBUG=y
# end of HW tracing support
CONFIG_FPGA=y
CONFIG_ALTERA_PR_IP_CORE=y
CONFIG_FPGA_MGR_ALTERA_PS_SPI=y
CONFIG_FPGA_MGR_ALTERA_CVP=y
# CONFIG_FPGA_MGR_XILINX_SPI is not set
CONFIG_FPGA_MGR_MACHXO2_SPI=y
CONFIG_FPGA_BRIDGE=y
CONFIG_ALTERA_FREEZE_BRIDGE=y
# CONFIG_XILINX_PR_DECOUPLER is not set
# CONFIG_FPGA_REGION is not set
# CONFIG_FPGA_DFL is not set
CONFIG_TEE=y
#
# TEE drivers
#
# end of TEE drivers
CONFIG_PM_OPP=y
CONFIG_UNISYS_VISORBUS=y
# CONFIG_SIOX is not set
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
CONFIG_INTERCONNECT=y
# CONFIG_COUNTER is not set
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
# CONFIG_OCFS2_FS_USERSPACE_CLUSTER is not set
# CONFIG_OCFS2_FS_STATS is not set
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
CONFIG_BTRFS_ASSERT=y
CONFIG_BTRFS_FS_REF_VERIFY=y
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
# CONFIG_F2FS_FS_POSIX_ACL is not set
# CONFIG_F2FS_FS_SECURITY is not set
CONFIG_F2FS_CHECK_FS=y
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_F2FS_FS_COMPRESSION=y
# CONFIG_F2FS_FS_LZO is not set
CONFIG_F2FS_FS_LZ4=y
CONFIG_ZONEFS_FS=y
CONFIG_FS_DAX=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_MANDATORY_FILE_LOCKING is not set
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
CONFIG_FS_VERITY=y
# CONFIG_FS_VERITY_DEBUG is not set
# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_AUTOFS_FS=y
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
# CONFIG_PROC_VMCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_PROC_CPU_RESCTRL=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not set
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
CONFIG_NLS_MAC_GREEK=y
# CONFIG_NLS_MAC_ICELAND is not set
CONFIG_NLS_MAC_INUIT=y
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
# CONFIG_DLM_DEBUG is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_PAGE_TABLE_ISOLATION=y
# CONFIG_FORTIFY_SOURCE is not set
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
# end of Memory initialization
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_CURVE25519=y
CONFIG_CRYPTO_CURVE25519_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set
CONFIG_CRYPTO_NHPOLY1305=y
CONFIG_CRYPTO_NHPOLY1305_SSE2=y
CONFIG_CRYPTO_NHPOLY1305_AVX2=y
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_ESSIV=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32_PCLMUL=y
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=y
# CONFIG_CRYPTO_BLAKE2S is not set
CONFIG_CRYPTO_BLAKE2S_X86=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
# CONFIG_CRYPTO_SM3 is not set
CONFIG_CRYPTO_STREEBOG=y
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=y
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_BLOWFISH_X86_64=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_CAST6_AVX_X86_64=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_CHACHA20=y
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX_X86_64=y
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_SM4 is not set
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_HASH_INFO=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_BLAKE2S=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
# CONFIG_CRYPTO_LIB_CHACHA is not set
CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA256=y
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=y
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
CONFIG_SECONDARY_TRUSTED_KEYRING=y
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking
#
# Library routines
#
CONFIG_RAID6_PQ=y
# CONFIG_RAID6_PQ_BENCHMARK is not set
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CORDIC=y
CONFIG_PRIME_NUMBERS=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
CONFIG_CRC32_SARWATE=y
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y
CONFIG_DMA_VIRT_OPS=y
CONFIG_SWIOTLB=y
CONFIG_DMA_CMA=y
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_PERCENTAGE=0
# CONFIG_CMA_SIZE_SEL_MBYTES is not set
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
CONFIG_CMA_SIZE_SEL_MAX=y
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_DIMLIB=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
CONFIG_STRING_SELFTEST=y
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DEBUG_SYNCHRO_TEST is not set
CONFIG_SYMBOLIC_ERRNAME=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# end of printk and dmesg options
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_READABLE_ASM=y
# CONFIG_HEADERS_INSTALL is not set
CONFIG_OPTIMIZE_INLINING=y
CONFIG_DEBUG_SECTION_MISMATCH=y
# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_FS=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
CONFIG_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN_NO_ALIGNMENT is not set
CONFIG_UBSAN_ALIGNMENT=y
CONFIG_HAVE_ARCH_KCSAN=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
CONFIG_PAGE_OWNER=y
CONFIG_PAGE_POISONING=y
CONFIG_PAGE_POISONING_NO_SANITY=y
# CONFIG_PAGE_POISONING_ZERO is not set
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
# CONFIG_PTDUMP_DEBUGFS is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE=16000
CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
# CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_KASAN_STACK=1
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_WQ_WATCHDOG=y
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_DEBUG_LOCKDEP=y
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_WW_MUTEX_SELFTEST=y
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
CONFIG_DEBUG_KOBJECT=y
#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
# CONFIG_RCU_PERF_TEST is not set
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_SAMPLES=y
CONFIG_SAMPLE_KOBJECT=y
CONFIG_SAMPLE_INTEL_MEI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
#
# x86 Debugging
#
CONFIG_DEBUG_AID_FOR_SYZBOT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not set
CONFIG_DEBUG_WX=y
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEBUG_BOOT_PARAMS=y
CONFIG_CPA_DEBUG=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
CONFIG_PUNIT_ATOM_DEBUG=y
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAIL_MAKE_REQUEST is not set
CONFIG_FAIL_IO_TIMEOUT=y
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_MEMTEST=y
# end of Kernel Testing and Coverage
# end of Kernel hacking
^ permalink raw reply [flat|nested] 95+ messages in thread
* mmotm 2020-02-24-19-53 uploaded
2020-02-04 1:33 incoming Andrew Morton
` (68 preceding siblings ...)
2020-02-14 6:26 ` mmotm 2020-02-13-22-26 uploaded Andrew Morton
@ 2020-02-25 3:53 ` Andrew Morton
2020-02-25 6:16 ` mmotm 2020-02-24-19-53 uploaded (init/main.c: initrd*) Randy Dunlap
` (2 more replies)
69 siblings, 3 replies; 95+ messages in thread
From: Andrew Morton @ 2020-02-25 3:53 UTC (permalink / raw)
To: broonie, linux-fsdevel, linux-kernel, linux-mm, linux-next,
mhocko, mm-commits, sfr
The mm-of-the-moment snapshot 2020-02-24-19-53 has been uploaded to
http://www.ozlabs.org/~akpm/mmotm/
mmotm-readme.txt says
README for mm-of-the-moment:
http://www.ozlabs.org/~akpm/mmotm/
This is a snapshot of my -mm patch queue. Uploaded at random hopefully
more than once a week.
You will need quilt to apply these patches to the latest Linus release (5.x
or 5.x-rcY). The series file is in broken-out.tar.gz and is duplicated in
http://ozlabs.org/~akpm/mmotm/series
The file broken-out.tar.gz contains two datestamp files: .DATE and
.DATE-yyyy-mm-dd-hh-mm-ss. Both contain the string yyyy-mm-dd-hh-mm-ss,
followed by the base kernel version against which this patch series is to
be applied.
This tree is partially included in linux-next. To see which patches are
included in linux-next, consult the `series' file. Only the patches
within the #NEXT_PATCHES_START/#NEXT_PATCHES_END markers are included in
linux-next.
A full copy of the full kernel tree with the linux-next and mmotm patches
already applied is available through git within an hour of the mmotm
release. Individual mmotm releases are tagged. The master branch always
points to the latest release, so it's constantly rebasing.
https://github.com/hnaz/linux-mm
The directory http://www.ozlabs.org/~akpm/mmots/ (mm-of-the-second)
contains daily snapshots of the -mm tree. It is updated more frequently
than mmotm, and is untested.
A git copy of this tree is also available at
https://github.com/hnaz/linux-mm
This mmotm tree contains the following patches against 5.6-rc3:
(patches marked "*" will be included in linux-next)
* mm-numa-fix-bad-pmd-by-atomically-check-for-pmd_trans_huge-when-marking-page-tables-prot_numa.patch
* mm-numa-fix-bad-pmd-by-atomically-check-for-pmd_trans_huge-when-marking-page-tables-prot_numa-fix.patch
* mm-fix-possible-pmd-dirty-bit-lost-in-set_pmd_migration_entry.patch
* mm-avoid-data-corruption-on-cow-fault-into-pfn-mapped-vma.patch
* mm-hugetlb-fix-a-addressing-exception-caused-by-huge_pte_offset.patch
* proc-kpageflags-prevent-an-integer-overflow-in-stable_page_flags.patch
* proc-kpageflags-do-not-use-uninitialized-struct-pages.patch
* fat-fix-uninit-memory-access-for-partial-initialized-inode.patch
* mm-z3fold-do-not-include-rwlockh-directly.patch
* mm-hotplug-fix-page-online-with-debug_pagealloc-compiled-but-not-enabled.patch
* arch-kconfig-update-have_reliable_stacktrace-description.patch
* x86-mm-split-vmalloc_sync_all.patch
* kthread-mark-timer-used-by-delayed-kthread-works-as-irq-safe.patch
* asm-generic-make-more-kernel-space-headers-mandatory.patch
* scripts-spellingtxt-add-syfs-sysfs-pattern.patch
* ocfs2-remove-fs_ocfs2_nm.patch
* ocfs2-remove-unused-macros.patch
* ocfs2-use-ocfs2_sec_bits-in-macro.patch
* ocfs2-remove-dlm_lock_is_remote.patch
* ocfs2-there-is-no-need-to-log-twice-in-several-functions.patch
* ocfs2-correct-annotation-from-l_next_rec-to-l_next_free_rec.patch
* ocfs2-remove-useless-err.patch
* ocfs2-add-missing-annotations-for-ocfs2_refcount_cache_lock-and-ocfs2_refcount_cache_unlock.patch
* ramfs-support-o_tmpfile.patch
* kernel-watchdog-flush-all-printk-nmi-buffers-when-hardlockup-detected.patch
mm.patch
* mm-slubc-replace-cpu_slab-partial-with-wrapped-apis.patch
* mm-slubc-replace-kmem_cache-cpu_partial-with-wrapped-apis.patch
* mm-kmemleak-use-address-of-operator-on-section-symbols.patch
* mm-debug-add-tests-validating-architecture-page-table-helpers.patch
* mm-dont-bother-dropping-mmap_sem-for-zero-size-readahead.patch
* mm-page-writebackc-write_cache_pages-deduplicate-identical-checks.patch
* mm-gup-split-get_user_pages_remote-into-two-routines.patch
* mm-gup-pass-a-flags-arg-to-__gup_device_-functions.patch
* mm-introduce-page_ref_sub_return.patch
* mm-gup-pass-gup-flags-to-two-more-routines.patch
* mm-gup-require-foll_get-for-get_user_pages_fast.patch
* mm-gup-track-foll_pin-pages.patch
* mm-gup-page-hpage_pinned_refcount-exact-pin-counts-for-huge-pages.patch
* mm-gup-proc-vmstat-pin_user_pages-foll_pin-reporting.patch
* mm-gup_benchmark-support-pin_user_pages-and-related-calls.patch
* selftests-vm-run_vmtests-invoke-gup_benchmark-with-basic-foll_pin-coverage.patch
* mm-improve-dump_page-for-compound-pages.patch
* mm-dump_page-additional-diagnostics-for-huge-pinned-pages.patch
* mm-swap-move-inode_lock-out-of-claim_swapfile.patch
* mm-swapfilec-fix-comments-for-swapcache_prepare.patch
* mm-swapc-not-necessary-to-export-__pagevec_lru_add.patch
* mm-swapfile-fix-data-races-in-try_to_unuse.patch
* mm-memcg-fix-build-error-around-the-usage-of-kmem_caches.patch
* mm-allocate-shrinker_map-on-appropriate-numa-node.patch
* mm-memcg-slab-introduce-mem_cgroup_from_obj.patch
* mm-memcg-slab-introduce-mem_cgroup_from_obj-v2.patch
* mm-kmem-cleanup-__memcg_kmem_charge_memcg-arguments.patch
* mm-kmem-cleanup-memcg_kmem_uncharge_memcg-arguments.patch
* mm-kmem-rename-memcg_kmem_uncharge-into-memcg_kmem_uncharge_page.patch
* mm-kmem-switch-to-nr_pages-in-__memcg_kmem_charge_memcg.patch
* mm-memcg-slab-cache-page-number-in-memcg_uncharge_slab.patch
* mm-kmem-rename-__memcg_kmem_uncharge_memcg-to-__memcg_kmem_uncharge.patch
* mm-mapping_dirty_helpers-update-huge-page-table-entry-callbacks.patch
* mm-dont-prepare-anon_vma-if-vma-has-vm_wipeonfork.patch
* revert-mm-rmapc-reuse-mergeable-anon_vma-as-parent-when-fork.patch
* mm-set-vm_next-and-vm_prev-to-null-in-vm_area_dup.patch
* mm-vma-add-missing-vma-flag-readable-name-for-vm_sync.patch
* mm-vma-make-vma_is_accessible-available-for-general-use.patch
* mm-vma-replace-all-remaining-open-encodings-with-is_vm_hugetlb_page.patch
* mm-vma-replace-all-remaining-open-encodings-with-vma_is_anonymous.patch
* mm-vma-append-unlikely-while-testing-vma-access-permissions.patch
* mm-mmap-fix-the-adjusted-length-error.patch
* mm-add-mremap_dontunmap-to-mremap.patch
* mm-add-mremap_dontunmap-to-mremap-v6.patch
* mm-add-mremap_dontunmap-to-mremap-v7.patch
* selftest-add-mremap_dontunmap-selftest.patch
* selftest-add-mremap_dontunmap-selftest-fix.patch
* selftest-add-mremap_dontunmap-selftest-v7.patch
* selftest-add-mremap_dontunmap-selftest-v7-checkpatch-fixes.patch
* mm-sparsemem-get-address-to-page-struct-instead-of-address-to-pfn.patch
* mm-sparse-rename-pfn_present-as-pfn_in_present_section.patch
* mm-page_alloc-increase-default-min_free_kbytes-bound.patch
* mm-vmpressure-dont-need-call-kfree-if-kstrndup-fails.patch
* mm-vmpressure-use-mem_cgroup_is_root-api.patch
* mm-vmscan-replace-open-codings-to-numa_no_node.patch
* mm-vmscanc-remove-cpu-online-notification-for-now.patch
* mm-mempolicy-support-mpol_mf_strict-for-huge-page-mapping.patch
* mm-mempolicy-checking-hugepage-migration-is-supported-by-arch-in-vma_migratable.patch
* mm-mempolicy-use-vm_bug_on_vma-in-queue_pages_test_walk.patch
* hugetlb_cgroup-add-hugetlb_cgroup-reservation-counter.patch
* hugetlb_cgroup-add-interface-for-charge-uncharge-hugetlb-reservations.patch
* mm-hugetlb_cgroup-fix-hugetlb_cgroup-migration.patch
* hugetlb_cgroup-add-reservation-accounting-for-private-mappings.patch
* hugetlb_cgroup-add-reservation-accounting-for-private-mappings-fix.patch
* hugetlb-disable-region_add-file_region-coalescing.patch
* hugetlb-disable-region_add-file_region-coalescing-fix.patch
* hugetlb_cgroup-add-accounting-for-shared-mappings.patch
* hugetlb_cgroup-add-accounting-for-shared-mappings-fix.patch
* hugetlb_cgroup-support-noreserve-mappings.patch
* hugetlb-support-file_region-coalescing-again.patch
* hugetlb-support-file_region-coalescing-again-fix.patch
* hugetlb-support-file_region-coalescing-again-fix-2.patch
* hugetlb_cgroup-add-hugetlb_cgroup-reservation-tests.patch
* hugetlb_cgroup-add-hugetlb_cgroup-reservation-docs.patch
* mm-migratec-no-need-to-check-for-i-start-in-do_pages_move.patch
* mm-migratec-wrap-do_move_pages_to_node-and-store_status.patch
* mm-migratec-check-pagelist-in-move_pages_and_store_status.patch
* mm-migratec-unify-not-queued-for-migration-handling-in-do_pages_move.patch
* mm-migratec-migrate-pg_readahead-flag.patch
* mm-migratec-migrate-pg_readahead-flag-fix.patch
* drivers-base-memoryc-cache-memory-blocks-in-xarray-to-accelerate-lookup.patch
* drivers-base-memoryc-cache-memory-blocks-in-xarray-to-accelerate-lookup-fix.patch
* mm-adjust-shuffle-code-to-allow-for-future-coalescing.patch
* mm-use-zone-and-order-instead-of-free-area-in-free_list-manipulators.patch
* mm-add-function-__putback_isolated_page.patch
* mm-introduce-reported-pages.patch
* virtio-balloon-pull-page-poisoning-config-out-of-free-page-hinting.patch
* virtio-balloon-add-support-for-providing-free-page-reports-to-host.patch
* mm-page_reporting-rotate-reported-pages-to-the-tail-of-the-list.patch
* mm-page_reporting-add-budget-limit-on-how-many-pages-can-be-reported-per-pass.patch
* mm-page_reporting-add-free-page-reporting-documentation.patch
* drivers-base-memoryc-indicate-all-memory-blocks-as-removable.patch
* drivers-base-memoryc-drop-section_count.patch
* drivers-base-memoryc-drop-pages_correctly_probed.patch
* mm-page_extc-drop-pfn_present-check-when-onlining.patch
* mm-hotplug-only-respect-mem=-parameter-during-boot-stage.patch
* shmem-distribute-switch-variables-for-initialization.patch
* zswap-allow-setting-default-status-compressor-and-allocator-in-kconfig.patch
* info-task-hung-in-generic_file_write_iter.patch
* info-task-hung-in-generic_file_write-fix.patch
* kernel-hung_taskc-monitor-killed-tasks.patch
* proc-faster-open-read-close-with-permanent-files.patch
* proc-faster-open-read-close-with-permanent-files-checkpatch-fixes.patch
* asm-generic-fix-unistd_32h-generation-format.patch
* kernel-extable-use-address-of-operator-on-section-symbols.patch
* maintainers-add-an-entry-for-kfifo.patch
* lib-test_lockup-test-module-to-generate-lockups.patch
* lib-bch-replace-zero-length-array-with-flexible-array-member.patch
* lib-ts_bm-replace-zero-length-array-with-flexible-array-member.patch
* lib-ts_fsm-replace-zero-length-array-with-flexible-array-member.patch
* lib-ts_kmp-replace-zero-length-array-with-flexible-array-member.patch
* lib-scatterlist-fix-sg_copy_buffer-kerneldoc.patch
* lib-test_stackinitc-xfail-switch-variable-init-tests.patch
* stackdepot-check-depot_index-before-accessing-the-stack-slab.patch
* stackdepot-build-with-fno-builtin.patch
* kasan-stackdepot-move-filter_irq_stacks-to-stackdepotc.patch
* percpu_counter-fix-a-data-race-at-vm_committed_as.patch
* lib-test_lockup-fix-spelling-mistake-iteraions-iterations.patch
* lib-test_bitmap-make-use-of-exp2_in_bits.patch
* string-add-stracpy-and-stracpy_pad-mechanisms.patch
* documentation-checkpatch-prefer-stracpy-strscpy-over-strcpy-strlcpy-strncpy.patch
* checkpatch-remove-email-address-comment-from-email-address-comparisons.patch
* checkpatch-check-spdx-tags-in-yaml-files.patch
* checkpatch-support-base-commit-format.patch
* checkpatch-prefer-fallthrough-over-fallthrough-comments.patch
* checkpatch-fix-minor-typo-and-mixed-spacetab-in-indentation.patch
* checkpatch-fix-multiple-const-types.patch
* checkpatch-add-command-line-option-for-tab-size.patch
* epoll-fix-possible-lost-wakeup-on-epoll_ctl-path.patch
* kselftest-introduce-new-epoll-test-case.patch
* elf-delete-loc-variable.patch
* elf-allocate-less-for-static-executable.patch
* elf-dont-free-interpreters-elf-pheaders-on-common-path.patch
* samples-hw_breakpoint-drop-hw_breakpoint_r-when-reporting-writes.patch
* samples-hw_breakpoint-drop-use-of-kallsyms_lookup_name.patch
* kallsyms-unexport-kallsyms_lookup_name-and-kallsyms_on_each_symbol.patch
* init-mainc-mark-boot_config_checksum-static.patch
* loop-use-worker-per-cgroup-instead-of-kworker.patch
* mm-charge-active-memcg-when-no-mm-is-set.patch
* loop-charge-i-o-to-mem-and-blk-cg.patch
* kernel-relayc-fix-read_pos-error-when-multiple-readers.patch
* aio-simplify-read_events.patch
* init-cleanup-anon_inodes-and-old-io-schedulers-options.patch
linux-next.patch
linux-next-rejects.patch
linux-next-fix.patch
* mm-frontswap-mark-various-intentional-data-races.patch
* mm-page_io-mark-various-intentional-data-races.patch
* mm-page_io-mark-various-intentional-data-races-v2.patch
* mm-swap_state-mark-various-intentional-data-races.patch
* mm-kmemleak-annotate-various-data-races-obj-ptr.patch
* mm-filemap-fix-a-data-race-in-filemap_fault.patch
* mm-swapfile-fix-and-annotate-various-data-races.patch
* mm-swapfile-fix-and-annotate-various-data-races-v2.patch
* mm-page_counter-fix-various-data-races-at-memsw.patch
* mm-memcontrol-fix-a-data-race-in-scan-count.patch
* mm-list_lru-fix-a-data-race-in-list_lru_count_one.patch
* mm-mempool-fix-a-data-race-in-mempool_free.patch
* mm-util-annotate-an-data-race-at-vm_committed_as.patch
* mm-rmap-annotate-a-data-race-at-tlb_flush_batched.patch
* mm-annotate-a-data-race-in-page_zonenum.patch
* mm-refactor-insert_page-to-prepare-for-batched-lock-insert.patch
* mm-add-vm_insert_pages.patch
* mm-add-vm_insert_pages-fix.patch
* mm-add-vm_insert_pages-2.patch
* net-zerocopy-use-vm_insert_pages-for-tcp-rcv-zerocopy.patch
* net-zerocopy-use-vm_insert_pages-for-tcp-rcv-zerocopy-fix.patch
* drivers-tty-serial-sh-scic-suppress-warning.patch
* fix-read-buffer-overflow-in-delta-ipc.patch
make-sure-nobodys-leaking-resources.patch
releasing-resources-with-children.patch
mutex-subsystem-synchro-test-module.patch
kernel-forkc-export-kernel_thread-to-modules.patch
workaround-for-a-pci-restoring-bug.patch
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: mmotm 2020-02-24-19-53 uploaded (init/main.c: initrd*)
2020-02-25 3:53 ` mmotm 2020-02-24-19-53 uploaded Andrew Morton
@ 2020-02-25 6:16 ` Randy Dunlap
2020-02-25 6:18 ` Randy Dunlap
2020-02-25 16:41 ` mmotm 2020-02-24-19-53 uploaded (drivers/platform/x86/intel_pmc_core.c) Randy Dunlap
2020-02-25 17:01 ` mmotm 2020-02-24-19-53 uploaded (objtool warning) Randy Dunlap
2 siblings, 1 reply; 95+ messages in thread
From: Randy Dunlap @ 2020-02-25 6:16 UTC (permalink / raw)
To: Andrew Morton, broonie, linux-fsdevel, linux-kernel, linux-mm,
linux-next, mhocko, mm-commits, sfr
[-- Attachment #1: Type: text/plain, Size: 725 bytes --]
On 2/24/20 7:53 PM, Andrew Morton wrote:
> The mm-of-the-moment snapshot 2020-02-24-19-53 has been uploaded to
>
> http://www.ozlabs.org/~akpm/mmotm/
>
> mmotm-readme.txt says
>
> README for mm-of-the-moment:
>
> http://www.ozlabs.org/~akpm/mmotm/
>
> This is a snapshot of my -mm patch queue. Uploaded at random hopefully
> more than once a week.
>
(I don't see what patch is causing this)
on i386:
# CONFIG_BLK_DEV_INITRD is not set
ld: init/main.o: in function `start_kernel':
main.c:(.init.text+0x7c8): undefined reference to `initrd_end'
ld: main.c:(.init.text+0x803): undefined reference to `initrd_start'
Full randconfig file is attached.
--
~Randy
Reported-by: Randy Dunlap <rdunlap@infradead.org>
[-- Attachment #2: config-r1041 --]
[-- Type: text/plain, Size: 86244 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 5.6.0-rc3 Kernel Configuration
#
#
# Compiler: gcc (SUSE Linux) 7.5.0
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=70500
CONFIG_CLANG_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
# CONFIG_WATCH_QUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_USELIB=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_HAVE_SCHED_AVG_IRQ=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
# CONFIG_CPU_ISOLATION is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
# CONFIG_IKHEADERS is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
CONFIG_UCLAMP_TASK=y
CONFIG_UCLAMP_BUCKETS_COUNT=5
# end of Scheduler features
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
# CONFIG_CGROUPS is not set
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_BOOT_CONFIG=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
# CONFIG_MULTIUSER is not set
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
# CONFIG_FHANDLE is not set
# CONFIG_POSIX_TIMERS is not set
# CONFIG_PRINTK is not set
# CONFIG_BUG is not set
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
# CONFIG_EVENTFD is not set
# CONFIG_SHMEM is not set
# CONFIG_AIO is not set
# CONFIG_IO_URING is not set
# CONFIG_ADVISE_SYSCALLS is not set
# CONFIG_MEMBARRIER is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_BPF_SYSCALL=y
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
# CONFIG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# end of Kernel Performance Events And Counters
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
CONFIG_SLAB_FREELIST_RANDOM=y
# CONFIG_SLAB_FREELIST_HARDENED is not set
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_X86_32=y
CONFIG_FORCE_DYNAMIC_FTRACE=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
# CONFIG_X86_MPPARSE is not set
CONFIG_GOLDFISH=y
# CONFIG_RETPOLINE is not set
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_BIGSMP=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
# CONFIG_X86_RDC321X is not set
CONFIG_X86_32_NON_STANDARD=y
CONFIG_X86_32_IRIS=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_X86_HV_CALLBACK_VECTOR=y
# CONFIG_KVM_GUEST is not set
# CONFIG_ARCH_CPUIDLE_HALTPOLL is not set
CONFIG_PVH=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
# CONFIG_M486SX is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
CONFIG_MEFFICEON=y
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=6
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_CPU_SUP_TRANSMETA_32 is not set
# CONFIG_CPU_SUP_UMC_32 is not set
# CONFIG_CPU_SUP_ZHAOXIN is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_NR_CPUS_RANGE_BEGIN=2
CONFIG_NR_CPUS_RANGE_END=64
CONFIG_NR_CPUS_DEFAULT=32
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
#
# Performance monitoring
#
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# end of Performance monitoring
# CONFIG_X86_LEGACY_VM86 is not set
# CONFIG_X86_IOPL_IOPERM is not set
CONFIG_TOSHIBA=y
CONFIG_I8K=y
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
# CONFIG_VMSPLIT_3G is not set
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
CONFIG_VMSPLIT_2G_OPT=y
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0x78000000
CONFIG_HIGHMEM=y
CONFIG_X86_CPA_STATISTICS=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
# CONFIG_ARCH_RANDOM is not set
CONFIG_X86_SMAP=y
# CONFIG_X86_UMIP is not set
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
CONFIG_DEBUG_HOTPLUG_CPU0=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
# end of Processor type and features
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_PM is not set
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_REV_OVERRIDE_POSSIBLE is not set
CONFIG_ACPI_EC_DEBUGFS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_TINY_POWER_BUTTON=y
CONFIG_ACPI_TINY_POWER_BUTTON_SIGNAL=38
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
CONFIG_DPTF_POWER=y
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
# CONFIG_X86_INTEL_PSTATE is not set
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
CONFIG_X86_P4_CLOCKMOD=y
CONFIG_X86_CPUFREQ_NFORCE2=y
CONFIG_X86_LONGRUN=y
CONFIG_X86_LONGHAUL=y
CONFIG_X86_E_POWERSAVER=y
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_CPU_IDLE_GOV_MENU is not set
# CONFIG_CPU_IDLE_GOV_TEO is not set
# end of CPU Idle
# CONFIG_INTEL_IDLE is not set
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
CONFIG_ISA_BUS=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
CONFIG_OLPC=y
# CONFIG_OLPC_XO15_SCI is not set
CONFIG_ALIX=y
# CONFIG_NET5501 is not set
# CONFIG_GEOS is not set
CONFIG_X86_SYSFB=y
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
CONFIG_COMPAT_32=y
# end of Binary Emulations
CONFIG_HAVE_ATOMIC_IOMAP=y
#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_FW_CFG_SYSFS=y
CONFIG_FW_CFG_SYSFS_CMDLINE=y
# CONFIG_GOOGLE_FIRMWARE is not set
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_OPROFILE=y
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_JUMP_LABEL=y
CONFIG_STATIC_KEYS_SELFTEST=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
# CONFIG_STACKPROTECTOR is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_ISA_BUS_API=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
# CONFIG_COMPAT_32BIT_TIME is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_GCOV_PROFILE_ALL is not set
CONFIG_GCOV_FORMAT_4_7=y
# end of GCOV-based kernel profiling
CONFIG_PLUGIN_HOSTCC=""
CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_MODULES_TREE_LOOKUP=y
# CONFIG_BLOCK is not set
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
# CONFIG_BALLOON_COMPACTION is not set
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_AREAS=7
CONFIG_ZPOOL=y
# CONFIG_ZBUD is not set
CONFIG_Z3FOLD=y
CONFIG_ZSMALLOC=y
CONFIG_PGTABLE_MAPPING=y
CONFIG_ZSMALLOC_STAT=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_FRAME_VECTOR=y
# CONFIG_PERCPU_STATS is not set
CONFIG_GUP_BENCHMARK=y
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# end of Memory Management options
# CONFIG_NET is not set
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
# CONFIG_PCI is not set
# CONFIG_PCCARD is not set
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# end of Firmware loader
# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_PM_QOS_KUNIT_TEST=y
CONFIG_KUNIT_DRIVER_PE_TEST=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SCCB=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MOXTET is not set
# end of Bus devices
CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
CONFIG_GNSS_MTK_SERIAL=y
CONFIG_GNSS_SIRF_SERIAL=y
# CONFIG_GNSS_UBX_SERIAL is not set
CONFIG_MTD=y
#
# Partition parsers
#
# CONFIG_MTD_AR7_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# end of Partition parsers
#
# User Modules And Translation Layers
#
CONFIG_MTD_OOPS=y
CONFIG_MTD_PARTITIONED_MASTER=y
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_PHYSMAP_GPIO_ADDR is not set
# CONFIG_MTD_SCx200_DOCFLASH is not set
CONFIG_MTD_AMD76XROM=y
# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_NETtel=y
# CONFIG_MTD_L440GX is not set
# CONFIG_MTD_PLATRAM is not set
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
CONFIG_MTD_DATAFLASH=y
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
CONFIG_MTD_DATAFLASH_OTP=y
# CONFIG_MTD_MCHP23K256 is not set
CONFIG_MTD_SST25L=y
CONFIG_MTD_SLRAM=y
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_ONENAND=y
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_GENERIC=y
CONFIG_MTD_ONENAND_OTP=y
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
CONFIG_MTD_RAW_NAND=y
# CONFIG_MTD_NAND_ECC_SW_BCH is not set
#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_NAND_CS553X=y
# CONFIG_MTD_NAND_MXIC is not set
CONFIG_MTD_NAND_GPIO=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_CADENCE=y
#
# Misc
#
CONFIG_MTD_NAND_NANDSIM=y
CONFIG_MTD_NAND_DISKONCHIP=y
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
# CONFIG_MTD_SPI_NAND is not set
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_MTD_HYPERBUS=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_PROMTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
#
# NVME Support
#
# end of NVME Support
#
# Misc devices
#
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
# CONFIG_AD525X_DPOT_SPI is not set
CONFIG_DUMMY_IRQ=y
CONFIG_ICS932S401=y
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_APDS9802ALS is not set
CONFIG_ISL29003=y
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_LATTICE_ECP3_CONFIG=y
# CONFIG_SRAM is not set
CONFIG_XILINX_SDFEC=y
# CONFIG_PVPANIC is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
# CONFIG_EEPROM_IDT_89HPESX is not set
CONFIG_EEPROM_EE1004=y
# end of EEPROM support
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
CONFIG_ALTERA_STAPL=y
#
# Intel MIC & related support
#
CONFIG_VOP_BUS=y
CONFIG_VOP=y
CONFIG_VHOST_RING=y
# end of Intel MIC & related support
# CONFIG_ECHO is not set
CONFIG_UACCE=y
# end of Misc devices
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# end of SCSI device support
CONFIG_MACINTOSH_DRIVERS=y
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=y
# CONFIG_SERIO_APBPS2 is not set
CONFIG_HYPERV_KEYBOARD=y
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
# CONFIG_TTY is not set
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_DEV_BUS=y
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
# CONFIG_IPMI_HANDLER is not set
# CONFIG_IPMB_DEVICE_INTERFACE is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
# CONFIG_DTLK is not set
# CONFIG_SCx200_GPIO is not set
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_SPI=y
CONFIG_TCG_TIS_SPI_CR50=y
# CONFIG_TCG_TIS_I2C_ATMEL is not set
CONFIG_TCG_TIS_I2C_INFINEON=y
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
CONFIG_TCG_INFINEON=y
CONFIG_TCG_CRB=y
# CONFIG_TCG_VTPM_PROXY is not set
CONFIG_TCG_TIS_ST33ZP24=y
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
CONFIG_TCG_TIS_ST33ZP24_SPI=y
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
# end of Character devices
# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_ACPI_I2C_OPREGION is not set
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_EMEV2=y
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_OCORES=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_RK3X is not set
CONFIG_I2C_SIMTEC=y
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_ISA=y
CONFIG_I2C_CROS_EC_TUNNEL=y
# end of I2C Hardware Bus support
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
CONFIG_I3C=y
# CONFIG_CDNS_I3C_MASTER is not set
CONFIG_DW_I3C_MASTER=y
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
CONFIG_SPI_NXP_FLEXSPI=y
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_LM70_LLP=y
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
CONFIG_SPI_ROCKCHIP=y
CONFIG_SPI_SC18IS602=y
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
CONFIG_SPI_XCOMM=y
# CONFIG_SPI_XILINX is not set
CONFIG_SPI_ZYNQMP_GQSPI=y
#
# SPI Multiplexer support
#
CONFIG_SPI_MUX=y
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_TLE62X0=y
CONFIG_SPI_SLAVE=y
CONFIG_SPI_SLAVE_TIME=y
CONFIG_SPI_SLAVE_SYSTEM_CONTROL=y
CONFIG_SPMI=y
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=y
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y
# CONFIG_NTP_PPS is not set
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_PARPORT=y
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
# CONFIG_PINCTRL_AS3722 is not set
# CONFIG_PINCTRL_AXP209 is not set
CONFIG_PINCTRL_AMD=y
# CONFIG_PINCTRL_MCP23S08 is not set
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_SX150X=y
# CONFIG_PINCTRL_STMFX is not set
CONFIG_PINCTRL_RK805=y
# CONFIG_PINCTRL_OCELOT is not set
# CONFIG_PINCTRL_BAYTRAIL is not set
# CONFIG_PINCTRL_CHERRYVIEW is not set
CONFIG_PINCTRL_LYNXPOINT=y
CONFIG_PINCTRL_INTEL=y
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_CANNONLAKE is not set
CONFIG_PINCTRL_CEDARFORK=y
# CONFIG_PINCTRL_DENVERTON is not set
CONFIG_PINCTRL_GEMINILAKE=y
CONFIG_PINCTRL_ICELAKE=y
CONFIG_PINCTRL_LEWISBURG=y
CONFIG_PINCTRL_SUNRISEPOINT=y
CONFIG_PINCTRL_TIGERLAKE=y
CONFIG_PINCTRL_LOCHNAGAR=y
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L85=y
CONFIG_PINCTRL_CS47L92=y
# CONFIG_PINCTRL_EQUILIBRIUM is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_CADENCE=y
# CONFIG_GPIO_DWAPB is not set
CONFIG_GPIO_FTGPIO010=y
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_GRGPIO is not set
CONFIG_GPIO_HLWD=y
CONFIG_GPIO_LOGICVC=y
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_SAMA5D2_PIOBU=y
# CONFIG_GPIO_SIFIVE is not set
CONFIG_GPIO_SIOX=y
CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_AMD_FCH=y
# end of Memory mapped GPIO drivers
#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_104_DIO_48E is not set
# CONFIG_GPIO_104_IDIO_16 is not set
# CONFIG_GPIO_104_IDI_48 is not set
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_GPIO_MM=y
CONFIG_GPIO_IT87=y
CONFIG_GPIO_SCH311X=y
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=y
# CONFIG_GPIO_ADP5588_IRQ is not set
# CONFIG_GPIO_ADNP is not set
CONFIG_GPIO_GW_PLD=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TPIC2810=y
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
CONFIG_GPIO_ARIZONA=y
# CONFIG_GPIO_BD70528 is not set
CONFIG_GPIO_BD71828=y
# CONFIG_GPIO_CRYSTAL_COVE is not set
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_LP3943=y
CONFIG_GPIO_LP873X=y
CONFIG_GPIO_LP87565=y
CONFIG_GPIO_MADERA=y
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_TPS65218=y
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TQMX86=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8994=y
# end of MFD GPIO expanders
#
# SPI GPIO expanders
#
CONFIG_GPIO_74X164=y
# CONFIG_GPIO_MAX3191X is not set
CONFIG_GPIO_MAX7301=y
# CONFIG_GPIO_MC33880 is not set
CONFIG_GPIO_PISOSR=y
CONFIG_GPIO_XRA1403=y
# end of SPI GPIO expanders
# CONFIG_GPIO_MOCKUP is not set
CONFIG_W1=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y
# CONFIG_W1_MASTER_SGI is not set
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2405 is not set
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
# CONFIG_W1_SLAVE_DS2413 is not set
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
# CONFIG_W1_SLAVE_DS2805 is not set
CONFIG_W1_SLAVE_DS2430=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2438=y
# CONFIG_W1_SLAVE_DS250X is not set
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
# CONFIG_W1_SLAVE_DS28E04 is not set
CONFIG_W1_SLAVE_DS28E17=y
# end of 1-wire Slaves
CONFIG_POWER_AVS=y
# CONFIG_QCOM_CPR is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_AS3722 is not set
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_LTC2952 is not set
CONFIG_POWER_RESET_MT6323=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
# CONFIG_SYSCON_REBOOT_MODE is not set
# CONFIG_NVMEM_REBOOT_MODE is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_POWER_SUPPLY_HWMON is not set
CONFIG_PDA_POWER=y
# CONFIG_WM831X_BACKUP is not set
# CONFIG_WM831X_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_ACT8945A is not set
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
# CONFIG_BATTERY_DS2781 is not set
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_OLPC=y
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
CONFIG_BATTERY_BQ27XXX_HDQ=y
CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM=y
# CONFIG_BATTERY_DA9150 is not set
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_MAX1721X=y
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_GPIO=y
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_LT3651 is not set
CONFIG_CHARGER_MAX14577=y
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
CONFIG_CHARGER_MAX77693=y
CONFIG_CHARGER_MAX8997=y
# CONFIG_CHARGER_BQ2415X is not set
CONFIG_CHARGER_BQ24190=y
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ25890=y
# CONFIG_CHARGER_SMB347 is not set
CONFIG_CHARGER_TPS65090=y
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_BATTERY_GOLDFISH=y
CONFIG_CHARGER_RT9455=y
CONFIG_CHARGER_UCS1002=y
CONFIG_CHARGER_BD70528=y
CONFIG_CHARGER_WILCO=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
CONFIG_SENSORS_AD7314=y
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM1177=y
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=y
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=y
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_AS370=y
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_AXI_FAN_CONTROL=y
CONFIG_SENSORS_ASB100=y
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DELL_SMM=y
# CONFIG_SENSORS_DA9055 is not set
# CONFIG_SENSORS_F71805F is not set
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_G762=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LOCHNAGAR=y
CONFIG_SENSORS_LTC2945=y
CONFIG_SENSORS_LTC2947=y
CONFIG_SENSORS_LTC2947_I2C=y
CONFIG_SENSORS_LTC2947_SPI=y
CONFIG_SENSORS_LTC2990=y
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
CONFIG_SENSORS_LTC4222=y
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LTC4260=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX1111=y
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX31722=y
# CONFIG_SENSORS_MAX31730 is not set
CONFIG_SENSORS_MAX6621=y
CONFIG_SENSORS_MAX6639=y
# CONFIG_SENSORS_MAX6642 is not set
CONFIG_SENSORS_MAX6650=y
# CONFIG_SENSORS_MAX6697 is not set
CONFIG_SENSORS_MAX31790=y
# CONFIG_SENSORS_MCP3021 is not set
CONFIG_SENSORS_MLXREG_FAN=y
# CONFIG_SENSORS_TC654 is not set
CONFIG_SENSORS_ADCXX=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_LM73=y
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=y
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_NCT6683=y
# CONFIG_SENSORS_NCT6775 is not set
CONFIG_SENSORS_NCT7802=y
CONFIG_SENSORS_NCT7904=y
# CONFIG_SENSORS_NPCM7XX is not set
CONFIG_SENSORS_PCF8591=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
CONFIG_SENSORS_ADM1275=y
# CONFIG_SENSORS_BEL_PFE is not set
# CONFIG_SENSORS_IBM_CFFPS is not set
# CONFIG_SENSORS_INSPUR_IPSPS is not set
CONFIG_SENSORS_IR35221=y
CONFIG_SENSORS_IR38064=y
CONFIG_SENSORS_IRPS5401=y
# CONFIG_SENSORS_ISL68137 is not set
# CONFIG_SENSORS_LM25066 is not set
# CONFIG_SENSORS_LTC2978 is not set
CONFIG_SENSORS_LTC3815=y
CONFIG_SENSORS_MAX16064=y
CONFIG_SENSORS_MAX20730=y
CONFIG_SENSORS_MAX20751=y
# CONFIG_SENSORS_MAX31785 is not set
# CONFIG_SENSORS_MAX34440 is not set
CONFIG_SENSORS_MAX8688=y
# CONFIG_SENSORS_PXE1610 is not set
CONFIG_SENSORS_TPS40422=y
CONFIG_SENSORS_TPS53679=y
# CONFIG_SENSORS_UCD9000 is not set
CONFIG_SENSORS_UCD9200=y
# CONFIG_SENSORS_XDPE122 is not set
CONFIG_SENSORS_ZL6100=y
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=y
# CONFIG_SENSORS_SHT3x is not set
CONFIG_SENSORS_SHTC1=y
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_EMC1403=y
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_STTS751=y
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=y
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=y
# CONFIG_SENSORS_INA209 is not set
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_INA3221=y
CONFIG_SENSORS_TC74=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP108=y
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=y
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_W83773G=y
CONFIG_SENSORS_W83781D=y
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y
CONFIG_SENSORS_ATK0110=y
CONFIG_THERMAL=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_CPU_THERMAL is not set
CONFIG_CLOCK_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_THERMAL_MMIO=y
# CONFIG_QORIQ_THERMAL is not set
CONFIG_DA9062_THERMAL=y
#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=y
# CONFIG_X86_PKG_TEMP_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=y
# CONFIG_MFD_AS3711 is not set
CONFIG_MFD_AS3722=y
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
# CONFIG_MFD_CROS_EC_DEV is not set
CONFIG_MFD_MADERA=y
CONFIG_MFD_MADERA_I2C=y
CONFIG_MFD_MADERA_SPI=y
# CONFIG_MFD_CS47L15 is not set
# CONFIG_MFD_CS47L35 is not set
CONFIG_MFD_CS47L85=y
# CONFIG_MFD_CS47L90 is not set
CONFIG_MFD_CS47L92=y
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
CONFIG_MFD_HI6421_PMIC=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
CONFIG_INTEL_SOC_PMIC=y
# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
CONFIG_INTEL_SOC_PMIC_CHTDC_TI=y
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
# CONFIG_MFD_MAX8925 is not set
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6397=y
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_CPCAP=y
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RT5033 is not set
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RK808=y
CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
CONFIG_MFD_SKY81452=y
CONFIG_MFD_SMSC=y
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_TI_LMU=y
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
# CONFIG_MFD_TPS65086 is not set
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TI_LP87565=y
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_MFD_TPS65912_SPI is not set
CONFIG_MFD_TPS80031=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TC3589X is not set
CONFIG_MFD_TQMX86=y
CONFIG_MFD_LOCHNAGAR=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_ARIZONA_SPI=y
# CONFIG_MFD_CS47L24 is not set
# CONFIG_MFD_WM5102 is not set
# CONFIG_MFD_WM5110 is not set
# CONFIG_MFD_WM8997 is not set
CONFIG_MFD_WM8998=y
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
# CONFIG_MFD_WM831X_I2C is not set
CONFIG_MFD_WM831X_SPI=y
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
CONFIG_MFD_ROHM_BD718XX=y
CONFIG_MFD_ROHM_BD70528=y
CONFIG_MFD_ROHM_BD71828=y
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_STMFX is not set
CONFIG_RAVE_SP_CORE=y
# end of Multifunction device drivers
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=y
CONFIG_REGULATOR_88PM8607=y
# CONFIG_REGULATOR_ACT8865 is not set
CONFIG_REGULATOR_ACT8945A=y
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_AXP20X=y
# CONFIG_REGULATOR_BD70528 is not set
CONFIG_REGULATOR_BD71828=y
CONFIG_REGULATOR_BD718XX=y
# CONFIG_REGULATOR_CPCAP is not set
CONFIG_REGULATOR_DA9055=y
CONFIG_REGULATOR_DA9062=y
CONFIG_REGULATOR_DA9063=y
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421=y
CONFIG_REGULATOR_HI6421V530=y
# CONFIG_REGULATOR_ISL9305 is not set
CONFIG_REGULATOR_ISL6271A=y
# CONFIG_REGULATOR_LM363X is not set
CONFIG_REGULATOR_LOCHNAGAR=y
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
# CONFIG_REGULATOR_LP872X is not set
CONFIG_REGULATOR_LP873X=y
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LP87565=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8952=y
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX8997=y
# CONFIG_REGULATOR_MAX8998 is not set
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MCP16502=y
# CONFIG_REGULATOR_MP5416 is not set
CONFIG_REGULATOR_MP8859=y
# CONFIG_REGULATOR_MPQ7920 is not set
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6323=y
CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
# CONFIG_REGULATOR_PV88080 is not set
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_QCOM_SPMI=y
# CONFIG_REGULATOR_RC5T583 is not set
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_RN5T618=y
CONFIG_REGULATOR_ROHM=y
# CONFIG_REGULATOR_S2MPA01 is not set
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_SKY81452=y
# CONFIG_REGULATOR_SLG51000 is not set
CONFIG_REGULATOR_SY8106A=y
CONFIG_REGULATOR_SY8824X=y
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_TPS65090=y
CONFIG_REGULATOR_TPS65132=y
# CONFIG_REGULATOR_TPS65218 is not set
# CONFIG_REGULATOR_TPS6524X is not set
# CONFIG_REGULATOR_TPS65912 is not set
CONFIG_REGULATOR_TPS80031=y
CONFIG_REGULATOR_TWL4030=y
# CONFIG_REGULATOR_VCTRL is not set
CONFIG_REGULATOR_WM831X=y
# CONFIG_REGULATOR_WM8994 is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
CONFIG_MEDIA_CONTROLLER=y
# CONFIG_MEDIA_CONTROLLER_DVB is not set
CONFIG_VIDEO_DEV=y
# CONFIG_VIDEO_V4L2_SUBDEV_API is not set
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_V4L2_I2C=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_V4L2_FWNODE=y
CONFIG_DVB_CORE=y
CONFIG_DVB_MMAP=y
CONFIG_DVB_MAX_ADAPTERS=16
# CONFIG_DVB_DYNAMIC_MINORS is not set
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
CONFIG_DVB_ULE_DEBUG=y
#
# Media drivers
#
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=y
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_V4L2=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_SMS_SIANO_MDTV=y
#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
#
# I2C Encoders, decoders, sensors and other helper chips
#
#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
CONFIG_VIDEO_TDA9840=y
CONFIG_VIDEO_TEA6415C=y
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
CONFIG_VIDEO_CS3308=y
CONFIG_VIDEO_CS5345=y
CONFIG_VIDEO_CS53L32A=y
# CONFIG_VIDEO_TLV320AIC23B is not set
CONFIG_VIDEO_UDA1342=y
# CONFIG_VIDEO_WM8775 is not set
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_VP27SMPX=y
CONFIG_VIDEO_SONY_BTF_MPX=y
#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
#
# Video decoders
#
CONFIG_VIDEO_ADV7183=y
CONFIG_VIDEO_BT819=y
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
CONFIG_VIDEO_KS0127=y
# CONFIG_VIDEO_ML86V7667 is not set
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=y
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
CONFIG_VIDEO_TW9903=y
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_TW9910 is not set
CONFIG_VIDEO_VPX3220=y
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=y
# CONFIG_VIDEO_CX25840 is not set
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=y
# CONFIG_VIDEO_SAA7185 is not set
CONFIG_VIDEO_ADV7170=y
CONFIG_VIDEO_ADV7175=y
# CONFIG_VIDEO_ADV7343 is not set
CONFIG_VIDEO_ADV7393=y
CONFIG_VIDEO_AK881X=y
CONFIG_VIDEO_THS8200=y
#
# Camera sensor devices
#
# CONFIG_VIDEO_OV2640 is not set
CONFIG_VIDEO_OV2659=y
CONFIG_VIDEO_OV2680=y
CONFIG_VIDEO_OV2685=y
# CONFIG_VIDEO_OV6650 is not set
CONFIG_VIDEO_OV5695=y
CONFIG_VIDEO_OV772X=y
CONFIG_VIDEO_OV7640=y
CONFIG_VIDEO_OV7670=y
CONFIG_VIDEO_OV7740=y
# CONFIG_VIDEO_OV9640 is not set
CONFIG_VIDEO_VS6624=y
CONFIG_VIDEO_MT9M111=y
CONFIG_VIDEO_MT9T112=y
CONFIG_VIDEO_MT9V011=y
# CONFIG_VIDEO_MT9V111 is not set
CONFIG_VIDEO_SR030PC30=y
# CONFIG_VIDEO_RJ54N1 is not set
#
# Lens drivers
#
CONFIG_VIDEO_AD5820=y
#
# Flash devices
#
CONFIG_VIDEO_ADP1653=y
CONFIG_VIDEO_LM3560=y
# CONFIG_VIDEO_LM3646 is not set
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y
#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
#
# SDR tuner chips
#
#
# Miscellaneous helper chips
#
CONFIG_VIDEO_THS7303=y
# CONFIG_VIDEO_M52790 is not set
CONFIG_VIDEO_I2C=y
# end of I2C Encoders, decoders, sensors and other helper chips
#
# SPI helper chips
#
# end of SPI helper chips
#
# Media SPI Adapters
#
CONFIG_CXD2880_SPI_DRV=y
# end of Media SPI Adapters
CONFIG_MEDIA_TUNER=y
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=y
# CONFIG_MEDIA_TUNER_TDA18250 is not set
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
# CONFIG_MEDIA_TUNER_TEA5761 is not set
# CONFIG_MEDIA_TUNER_TEA5767 is not set
# CONFIG_MEDIA_TUNER_MSI001 is not set
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2063=y
CONFIG_MEDIA_TUNER_MT2266=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_XC2028=y
# CONFIG_MEDIA_TUNER_XC5000 is not set
# CONFIG_MEDIA_TUNER_XC4000 is not set
CONFIG_MEDIA_TUNER_MXL5005S=y
CONFIG_MEDIA_TUNER_MXL5007T=y
CONFIG_MEDIA_TUNER_MC44S803=y
# CONFIG_MEDIA_TUNER_MAX2165 is not set
# CONFIG_MEDIA_TUNER_TDA18218 is not set
CONFIG_MEDIA_TUNER_FC0011=y
# CONFIG_MEDIA_TUNER_FC0012 is not set
CONFIG_MEDIA_TUNER_FC0013=y
# CONFIG_MEDIA_TUNER_TDA18212 is not set
# CONFIG_MEDIA_TUNER_E4000 is not set
CONFIG_MEDIA_TUNER_FC2580=y
# CONFIG_MEDIA_TUNER_M88RS6000T is not set
CONFIG_MEDIA_TUNER_TUA9001=y
# CONFIG_MEDIA_TUNER_SI2157 is not set
CONFIG_MEDIA_TUNER_IT913X=y
CONFIG_MEDIA_TUNER_R820T=y
CONFIG_MEDIA_TUNER_MXL301RF=y
CONFIG_MEDIA_TUNER_QM1D1C0042=y
CONFIG_MEDIA_TUNER_QM1D1B0004=y
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_STB0899 is not set
CONFIG_DVB_STB6100=y
# CONFIG_DVB_STV090x is not set
CONFIG_DVB_STV0910=y
# CONFIG_DVB_STV6110x is not set
CONFIG_DVB_STV6111=y
CONFIG_DVB_MXL5XX=y
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=y
CONFIG_DVB_TDA18271C2DD=y
CONFIG_DVB_SI2165=y
# CONFIG_DVB_MN88472 is not set
CONFIG_DVB_MN88473=y
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=y
CONFIG_DVB_CX24123=y
CONFIG_DVB_MT312=y
# CONFIG_DVB_ZL10036 is not set
CONFIG_DVB_ZL10039=y
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_STV0288 is not set
CONFIG_DVB_STB6000=y
CONFIG_DVB_STV0299=y
CONFIG_DVB_STV6110=y
CONFIG_DVB_STV0900=y
CONFIG_DVB_TDA8083=y
CONFIG_DVB_TDA10086=y
# CONFIG_DVB_TDA8261 is not set
# CONFIG_DVB_VES1X93 is not set
CONFIG_DVB_TUNER_ITD1000=y
CONFIG_DVB_TUNER_CX24113=y
CONFIG_DVB_TDA826X=y
# CONFIG_DVB_TUA6100 is not set
CONFIG_DVB_CX24116=y
CONFIG_DVB_CX24117=y
CONFIG_DVB_CX24120=y
CONFIG_DVB_SI21XX=y
CONFIG_DVB_TS2020=y
CONFIG_DVB_DS3000=y
CONFIG_DVB_MB86A16=y
CONFIG_DVB_TDA10071=y
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
CONFIG_DVB_SP887X=y
# CONFIG_DVB_CX22700 is not set
CONFIG_DVB_CX22702=y
CONFIG_DVB_S5H1432=y
CONFIG_DVB_DRXD=y
CONFIG_DVB_L64781=y
# CONFIG_DVB_TDA1004X is not set
CONFIG_DVB_NXT6000=y
CONFIG_DVB_MT352=y
CONFIG_DVB_ZL10353=y
# CONFIG_DVB_DIB3000MB is not set
CONFIG_DVB_DIB3000MC=y
CONFIG_DVB_DIB7000M=y
CONFIG_DVB_DIB7000P=y
CONFIG_DVB_DIB9000=y
# CONFIG_DVB_TDA10048 is not set
# CONFIG_DVB_EC100 is not set
CONFIG_DVB_STV0367=y
# CONFIG_DVB_CXD2820R is not set
CONFIG_DVB_CXD2841ER=y
# CONFIG_DVB_ZD1301_DEMOD is not set
CONFIG_DVB_CXD2880=y
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=y
CONFIG_DVB_TDA10021=y
CONFIG_DVB_TDA10023=y
# CONFIG_DVB_STV0297 is not set
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
CONFIG_DVB_OR51211=y
CONFIG_DVB_OR51132=y
CONFIG_DVB_BCM3510=y
CONFIG_DVB_LGDT330X=y
CONFIG_DVB_LGDT3305=y
CONFIG_DVB_LG2160=y
CONFIG_DVB_S5H1409=y
CONFIG_DVB_AU8522=y
CONFIG_DVB_AU8522_DTV=y
CONFIG_DVB_AU8522_V4L=y
# CONFIG_DVB_S5H1411 is not set
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=y
CONFIG_DVB_DIB8000=y
# CONFIG_DVB_MB86A20S is not set
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_TC90522 is not set
CONFIG_DVB_MN88443X=y
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
# CONFIG_DVB_TUNER_DIB0070 is not set
CONFIG_DVB_TUNER_DIB0090=y
#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=y
CONFIG_DVB_LNBH25=y
# CONFIG_DVB_LNBH29 is not set
# CONFIG_DVB_LNBP21 is not set
CONFIG_DVB_LNBP22=y
CONFIG_DVB_ISL6405=y
# CONFIG_DVB_ISL6421 is not set
CONFIG_DVB_ISL6423=y
# CONFIG_DVB_A8293 is not set
CONFIG_DVB_LGS8GL5=y
# CONFIG_DVB_LGS8GXX is not set
# CONFIG_DVB_ATBM8830 is not set
CONFIG_DVB_TDA665x=y
CONFIG_DVB_IX2505V=y
CONFIG_DVB_M88RS2000=y
CONFIG_DVB_AF9033=y
CONFIG_DVB_HORUS3A=y
# CONFIG_DVB_ASCOT2E is not set
CONFIG_DVB_HELENE=y
#
# Common Interface (EN50221) controller drivers
#
# CONFIG_DVB_CXD2099 is not set
CONFIG_DVB_SP2=y
#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=y
# end of Customise DVB Frontends
#
# Graphics support
#
# CONFIG_DRM is not set
#
# ARM devices
#
# end of ARM devices
#
# ACP (Audio CoProcessor) Configuration
#
# end of ACP (Audio CoProcessor) Configuration
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_BACKLIGHT=y
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
CONFIG_FB_ARC=y
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_FB_N411=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_IBM_GXT4500 is not set
CONFIG_FB_GOLDFISH=y
CONFIG_FB_VIRTUAL=y
CONFIG_FB_METRONOME=y
CONFIG_FB_HYPERV=y
# CONFIG_FB_SIMPLE is not set
CONFIG_FB_SSD1307=y
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_LM3533=y
# CONFIG_BACKLIGHT_PWM is not set
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_QCOM_WLED=y
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP8860=y
# CONFIG_BACKLIGHT_ADP8870 is not set
CONFIG_BACKLIGHT_88PM860X=y
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
# CONFIG_BACKLIGHT_PANDORA is not set
CONFIG_BACKLIGHT_SKY81452=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
# CONFIG_BACKLIGHT_BD6107 is not set
CONFIG_BACKLIGHT_ARCXCNN=y
CONFIG_BACKLIGHT_RAVE_SP=y
CONFIG_BACKLIGHT_LED=y
# end of Backlight & LCD device support
CONFIG_VGASTATE=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# end of Graphics support
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_SEQ_DEVICE=y
# CONFIG_SND_OSSEMUL is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_PROC_FS is not set
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_ISA is not set
#
# HD-Audio
#
# end of HD-Audio
CONFIG_SND_HDA_PREALLOC_SIZE=0
# CONFIG_SND_SPI is not set
# CONFIG_SND_SOC is not set
CONFIG_SND_X86=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_TEST=y
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=y
# CONFIG_MMC_SDHCI_OF_ASPEED is not set
# CONFIG_MMC_SDHCI_OF_AT91 is not set
CONFIG_MMC_SDHCI_OF_DWCMSHC=y
CONFIG_MMC_SDHCI_CADENCE=y
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_SDHCI_MILBEAUT is not set
CONFIG_MMC_WBSD=y
CONFIG_MMC_GOLDFISH=y
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_CQHCI=y
CONFIG_MMC_HSQ=y
CONFIG_MMC_MTK=y
CONFIG_MMC_SDHCI_XENON=y
CONFIG_MMC_SDHCI_OMAP=y
# CONFIG_MMC_SDHCI_AM654 is not set
CONFIG_MMC_SDHCI_EXTERNAL_DMA=y
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
CONFIG_LEDS_AAT1290=y
# CONFIG_LEDS_AN30259A is not set
CONFIG_LEDS_APU=y
CONFIG_LEDS_AS3645A=y
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=y
CONFIG_LEDS_CPCAP=y
CONFIG_LEDS_CR0014114=y
CONFIG_LEDS_EL15203000=y
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_LM3532=y
# CONFIG_LEDS_LM3533 is not set
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_LM3692X=y
CONFIG_LEDS_LM3601X=y
CONFIG_LEDS_MT6323=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP55XX_COMMON=y
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=y
# CONFIG_LEDS_LP5562 is not set
CONFIG_LEDS_LP8501=y
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_CLEVO_MAIL=y
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_WM831X_STATUS=y
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
# CONFIG_LEDS_MAX77693 is not set
CONFIG_LEDS_MAX8997=y
# CONFIG_LEDS_LM355x is not set
CONFIG_LEDS_OT200=y
CONFIG_LEDS_KTD2692=y
CONFIG_LEDS_IS31FL319X=y
# CONFIG_LEDS_IS31FL32XX is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_MLXCPLD=y
# CONFIG_LEDS_MLXREG is not set
CONFIG_LEDS_USER=y
CONFIG_LEDS_NIC78BX=y
CONFIG_LEDS_SPI_BYTE=y
CONFIG_LEDS_TI_LMU_COMMON=y
CONFIG_LEDS_LM3697=y
CONFIG_LEDS_LM36274=y
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
CONFIG_ACCESSIBILITY=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
CONFIG_RTC_INTF_PROC=y
# CONFIG_RTC_INTF_DEV is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=y
CONFIG_RTC_DRV_ABB5ZES3=y
CONFIG_RTC_DRV_ABEOZ9=y
CONFIG_RTC_DRV_ABX80X=y
# CONFIG_RTC_DRV_AS3722 is not set
# CONFIG_RTC_DRV_DS1307 is not set
CONFIG_RTC_DRV_DS1374=y
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_HYM8563=y
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX8998=y
CONFIG_RTC_DRV_MAX8997=y
# CONFIG_RTC_DRV_RK808 is not set
CONFIG_RTC_DRV_RS5C372=y
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8523=y
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
# CONFIG_RTC_DRV_BD70528 is not set
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_TPS80031=y
CONFIG_RTC_DRV_RC5T583=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
CONFIG_RTC_DRV_EM3027=y
# CONFIG_RTC_DRV_RV3028 is not set
CONFIG_RTC_DRV_RV8803=y
CONFIG_RTC_DRV_S5M=y
CONFIG_RTC_DRV_SD3078=y
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
CONFIG_RTC_DRV_DS1302=y
CONFIG_RTC_DRV_DS1305=y
# CONFIG_RTC_DRV_DS1343 is not set
CONFIG_RTC_DRV_DS1347=y
# CONFIG_RTC_DRV_DS1390 is not set
CONFIG_RTC_DRV_MAX6916=y
CONFIG_RTC_DRV_R9701=y
# CONFIG_RTC_DRV_RX4581 is not set
CONFIG_RTC_DRV_RX6110=y
CONFIG_RTC_DRV_RS5C348=y
CONFIG_RTC_DRV_MAX6902=y
# CONFIG_RTC_DRV_PCF2123 is not set
CONFIG_RTC_DRV_MCP795=y
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
# CONFIG_RTC_DRV_DS3232_HWMON is not set
CONFIG_RTC_DRV_PCF2127=y
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1685_FAMILY=y
# CONFIG_RTC_DRV_DS1685 is not set
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
CONFIG_RTC_DRV_DS17885=y
# CONFIG_RTC_DRV_DS1742 is not set
CONFIG_RTC_DRV_DS2404=y
CONFIG_RTC_DRV_DA9055=y
CONFIG_RTC_DRV_DA9063=y
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
# CONFIG_RTC_DRV_WM831X is not set
# CONFIG_RTC_DRV_ZYNQMP is not set
CONFIG_RTC_DRV_CROS_EC=y
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_CADENCE is not set
# CONFIG_RTC_DRV_FTRTC010 is not set
CONFIG_RTC_DRV_SNVS=y
# CONFIG_RTC_DRV_MT6397 is not set
CONFIG_RTC_DRV_R7301=y
# CONFIG_RTC_DRV_CPCAP is not set
#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_GOLDFISH=y
CONFIG_RTC_DRV_WILCO_EC=y
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_DMA_OF=y
CONFIG_ALTERA_MSGDMA=y
# CONFIG_DW_AXI_DMAC is not set
CONFIG_FSL_EDMA=y
# CONFIG_INTEL_IDMA64 is not set
CONFIG_QCOM_HIDMA_MGMT=y
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_SF_PDMA=y
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
# CONFIG_UDMABUF is not set
CONFIG_DMABUF_SELFTESTS=y
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_HEAPS_SYSTEM=y
# CONFIG_DMABUF_HEAPS_CMA is not set
# end of DMABUF options
# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not set
CONFIG_UIO=y
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_PRUSS=y
CONFIG_UIO_HV_GENERIC=y
CONFIG_VFIO_IOMMU_TYPE1=y
CONFIG_VFIO=y
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_MDEV=y
CONFIG_VFIO_MDEV_DEVICE=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=y
CONFIG_HYPERV_TIMER=y
CONFIG_HYPERV_BALLOON=y
# end of Microsoft Hyper-V guest support
CONFIG_GREYBUS=y
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
CONFIG_GOLDFISH_PIPE=y
CONFIG_MFD_CROS_EC=y
CONFIG_CHROME_PLATFORMS=y
# CONFIG_CHROMEOS_LAPTOP is not set
CONFIG_CHROMEOS_PSTORE=y
CONFIG_CROS_EC=y
# CONFIG_CROS_EC_I2C is not set
# CONFIG_CROS_EC_RPMSG is not set
# CONFIG_CROS_EC_SPI is not set
CONFIG_CROS_EC_LPC=y
CONFIG_CROS_EC_PROTO=y
CONFIG_CROS_KBD_LED_BACKLIGHT=y
CONFIG_WILCO_EC=y
# CONFIG_WILCO_EC_DEBUGFS is not set
CONFIG_WILCO_EC_EVENTS=y
CONFIG_WILCO_EC_TELEMETRY=y
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=y
CONFIG_MLXREG_IO=y
CONFIG_OLPC_EC=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_WM831X is not set
# CONFIG_CLK_HSDK is not set
CONFIG_COMMON_CLK_MAX9485=y
CONFIG_COMMON_CLK_RK808=y
CONFIG_COMMON_CLK_SI5341=y
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI514=y
CONFIG_COMMON_CLK_SI544=y
CONFIG_COMMON_CLK_SI570=y
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_CDCE925=y
CONFIG_COMMON_CLK_CS2000_CP=y
CONFIG_COMMON_CLK_S2MPS11=y
CONFIG_COMMON_CLK_LOCHNAGAR=y
CONFIG_COMMON_CLK_PWM=y
CONFIG_COMMON_CLK_VC5=y
CONFIG_COMMON_CLK_BD718XX=y
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
# end of Common Clock Framework
CONFIG_HWSPINLOCK=y
#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
CONFIG_CLKSRC_MMIO=y
CONFIG_MICROCHIP_PIT64B=y
# end of Clock Source drivers
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_OF_IOMMU=y
CONFIG_HYPERV_IOMMU=y
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Aspeed SoC drivers
#
# end of Aspeed SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
CONFIG_XILINX_VCU=y
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_INTEL_INT3496=y
# CONFIG_EXTCON_MAX14577 is not set
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_PTN5150=y
# CONFIG_EXTCON_RT8973A is not set
CONFIG_EXTCON_SM5502=y
# CONFIG_EXTCON_USB_GPIO is not set
CONFIG_EXTCON_USBC_CROS_EC=y
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_ATMEL_HLCDC_PWM=y
CONFIG_PWM_CRC=y
CONFIG_PWM_CROS_EC=y
# CONFIG_PWM_FSL_FTM is not set
CONFIG_PWM_LP3943=y
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PLATFORM=y
CONFIG_PWM_PCA9685=y
CONFIG_PWM_TWL=y
CONFIG_PWM_TWL_LED=y
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
CONFIG_MADERA_IRQ=y
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_BRCMSTB_RESCAL is not set
CONFIG_RESET_INTEL_GW=y
# CONFIG_RESET_TI_SYSCON is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
CONFIG_PHY_CADENCE_DP=y
# CONFIG_PHY_CADENCE_DPHY is not set
CONFIG_PHY_CADENCE_SIERRA=y
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
CONFIG_PHY_OCELOT_SERDES=y
CONFIG_PHY_INTEL_EMMC=y
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# end of Performance monitor support
# CONFIG_RAS is not set
#
# Android
#
# CONFIG_ANDROID is not set
# end of Android
# CONFIG_DAX is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_SPMI_SDAM=y
# CONFIG_RAVE_SP_EEPROM is not set
#
# HW tracing support
#
CONFIG_STM=y
# CONFIG_STM_PROTO_BASIC is not set
CONFIG_STM_PROTO_SYS_T=y
CONFIG_STM_DUMMY=y
CONFIG_STM_SOURCE_CONSOLE=y
CONFIG_STM_SOURCE_HEARTBEAT=y
CONFIG_STM_SOURCE_FTRACE=y
CONFIG_INTEL_TH=y
CONFIG_INTEL_TH_ACPI=y
CONFIG_INTEL_TH_GTH=y
# CONFIG_INTEL_TH_STH is not set
# CONFIG_INTEL_TH_MSU is not set
CONFIG_INTEL_TH_PTI=y
CONFIG_INTEL_TH_DEBUG=y
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_FSI is not set
CONFIG_TEE=y
#
# TEE drivers
#
# end of TEE drivers
CONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
CONFIG_MUX_ADGS1408=y
# CONFIG_MUX_GPIO is not set
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers
CONFIG_PM_OPP=y
CONFIG_SIOX=y
CONFIG_SIOX_BUS_GPIO=y
# CONFIG_SLIMBUS is not set
CONFIG_INTERCONNECT=y
CONFIG_COUNTER=y
CONFIG_FTM_QUADDEC=y
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
# CONFIG_MANDATORY_FILE_LOCKING is not set
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_VERITY=y
# CONFIG_FS_VERITY_DEBUG is not set
CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QFMT_V1=y
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
CONFIG_OVERLAY_FS_XINO_AUTO=y
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_FSCACHE_OBJECT_LIST=y
# end of Caches
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_PROC_VMCORE is not set
CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_PROC_CPU_RESCTRL=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
# CONFIG_NLS_MAC_CROATIAN is not set
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
# CONFIG_UNICODE is not set
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
# end of Memory initialization
# end of Kernel hardening options
# end of Security options
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_CURVE25519=y
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_AEGIS128=y
CONFIG_CRYPTO_SEQIV=y
# CONFIG_CRYPTO_ECHAINIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_ESSIV is not set
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_BLAKE2S=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_MD4=y
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_TGR192=y
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_SEED=y
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_586 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_HASH_INFO=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
# CONFIG_CRYPTO_LIB_BLAKE2S is not set
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA256=y
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
# CONFIG_TPM_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=y
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
# CONFIG_CORDIC is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC16=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_DMA_CMA=y
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_PERCENTAGE=0
# CONFIG_CMA_SIZE_SEL_MBYTES is not set
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
CONFIG_CMA_SIZE_SEL_MIN=y
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_32=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STRING_SELFTEST=y
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_SYMBOLIC_ERRNAME is not set
# end of printk and dmesg options
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
CONFIG_READABLE_ASM=y
# CONFIG_HEADERS_INSTALL is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
# CONFIG_UBSAN_SANITIZE_ALL is not set
# CONFIG_UBSAN_NO_ALIGNMENT is not set
CONFIG_UBSAN_ALIGNMENT=y
# end of Generic Kernel Debugging Instruments
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_DEBUG_PAGE_REF=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
CONFIG_PTDUMP_DEBUGFS=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_VMACACHE=y
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VM_PGFLAGS is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_KASAN_STACK=1
# end of Memory Debugging
CONFIG_DEBUG_SHIRQ=y
#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
CONFIG_TEST_LOCKUP=y
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
CONFIG_DEBUG_TIMEKEEPING=y
CONFIG_DEBUG_PREEMPT=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=y
CONFIG_WW_MUTEX_SELFTEST=y
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
CONFIG_RCU_PERF_TEST=y
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
CONFIG_CPU_HOTPLUG_STATE_CONTROL=y
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_BOOTTIME_TRACING=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_STACK_TRACER=y
CONFIG_TRACE_PREEMPT_TOGGLE=y
CONFIG_PREEMPTIRQ_EVENTS=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
CONFIG_PROFILE_ANNOTATED_BRANCHES=y
# CONFIG_BRANCH_TRACER is not set
# CONFIG_UPROBE_EVENTS is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_HIST_TRIGGERS is not set
CONFIG_TRACE_EVENT_INJECT=y
CONFIG_TRACEPOINT_BENCHMARK=y
CONFIG_RING_BUFFER_BENCHMARK=y
# CONFIG_TRACE_EVAL_MAP_FILE is not set
CONFIG_GCOV_PROFILE_FTRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
CONFIG_SAMPLES=y
CONFIG_SAMPLE_KOBJECT=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
#
# x86 Debugging
#
CONFIG_DEBUG_AID_FOR_SYZBOT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
# CONFIG_EARLY_PRINTK is not set
CONFIG_DEBUG_WX=y
# CONFIG_DOUBLEFAULT is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
CONFIG_IO_DELAY_UDELAY=y
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
CONFIG_UNWINDER_FRAME_POINTER=y
# CONFIG_UNWINDER_GUESS is not set
# end of x86 Debugging
#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
CONFIG_KUNIT_TEST=y
CONFIG_KUNIT_EXAMPLE_TEST=y
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
# CONFIG_FAIL_PAGE_ALLOC is not set
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=y
# CONFIG_TEST_LIST_SORT is not set
CONFIG_TEST_SORT=y
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_RBTREE_TEST=y
CONFIG_REED_SOLOMON_TEST=y
CONFIG_INTERVAL_TREE_TEST=y
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_TEST_HEXDUMP=y
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_STRSCPY=y
# CONFIG_TEST_KSTRTOX is not set
CONFIG_TEST_PRINTF=y
CONFIG_TEST_BITMAP=y
# CONFIG_TEST_BITFIELD is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
CONFIG_TEST_OVERFLOW=y
# CONFIG_TEST_RHASHTABLE is not set
CONFIG_TEST_HASH=y
CONFIG_TEST_IDA=y
CONFIG_FIND_BIT_BENCHMARK=y
CONFIG_TEST_FIRMWARE=y
# CONFIG_TEST_SYSCTL is not set
# CONFIG_SYSCTL_KUNIT_TEST is not set
CONFIG_LIST_KUNIT_TEST=y
CONFIG_TEST_UDELAY=y
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_STACKINIT is not set
CONFIG_TEST_MEMINIT=y
# CONFIG_MEMTEST is not set
# CONFIG_HYPERV_TESTING is not set
# end of Kernel Testing and Coverage
# end of Kernel hacking
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: mmotm 2020-02-24-19-53 uploaded (init/main.c: initrd*)
2020-02-25 6:16 ` mmotm 2020-02-24-19-53 uploaded (init/main.c: initrd*) Randy Dunlap
@ 2020-02-25 6:18 ` Randy Dunlap
2020-02-25 6:21 ` Randy Dunlap
0 siblings, 1 reply; 95+ messages in thread
From: Randy Dunlap @ 2020-02-25 6:18 UTC (permalink / raw)
To: Andrew Morton, broonie, linux-fsdevel, linux-kernel, linux-mm,
linux-next, mhocko, mm-commits, sfr, Masami Hiramatsu,
Steven Rostedt
On 2/24/20 10:16 PM, Randy Dunlap wrote:
> On 2/24/20 7:53 PM, Andrew Morton wrote:
>> The mm-of-the-moment snapshot 2020-02-24-19-53 has been uploaded to
>>
>> http://www.ozlabs.org/~akpm/mmotm/
>>
>> mmotm-readme.txt says
>>
>> README for mm-of-the-moment:
>>
>> http://www.ozlabs.org/~akpm/mmotm/
>>
>> This is a snapshot of my -mm patch queue. Uploaded at random hopefully
>> more than once a week.
>>
>
> (I don't see what patch is causing this)
>
It appears to be related to BOOTCONFIG.
>
> on i386:
> # CONFIG_BLK_DEV_INITRD is not set
>
>
> ld: init/main.o: in function `start_kernel':
> main.c:(.init.text+0x7c8): undefined reference to `initrd_end'
> ld: main.c:(.init.text+0x803): undefined reference to `initrd_start'
>
>
> Full randconfig file is attached.
>
--
~Randy
Reported-by: Randy Dunlap <rdunlap@infradead.org>
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: mmotm 2020-02-24-19-53 uploaded (init/main.c: initrd*)
2020-02-25 6:18 ` Randy Dunlap
@ 2020-02-25 6:21 ` Randy Dunlap
0 siblings, 0 replies; 95+ messages in thread
From: Randy Dunlap @ 2020-02-25 6:21 UTC (permalink / raw)
To: Andrew Morton, broonie, linux-fsdevel, linux-kernel, linux-mm,
linux-next, mhocko, mm-commits, sfr, Masami Hiramatsu,
Steven Rostedt
On 2/24/20 10:18 PM, Randy Dunlap wrote:
> On 2/24/20 10:16 PM, Randy Dunlap wrote:
>> On 2/24/20 7:53 PM, Andrew Morton wrote:
>>> The mm-of-the-moment snapshot 2020-02-24-19-53 has been uploaded to
>>>
>>> http://www.ozlabs.org/~akpm/mmotm/
>>>
>>> mmotm-readme.txt says
>>>
>>> README for mm-of-the-moment:
>>>
>>> http://www.ozlabs.org/~akpm/mmotm/
>>>
>>> This is a snapshot of my -mm patch queue. Uploaded at random hopefully
>>> more than once a week.
>>>
>>
>> (I don't see what patch is causing this)
>>
>
> It appears to be related to BOOTCONFIG.
>
Argh. My bad. This build error happens in linux-next-20200225, not mmotm.
>>
>> on i386:
>> # CONFIG_BLK_DEV_INITRD is not set
>>
>>
>> ld: init/main.o: in function `start_kernel':
>> main.c:(.init.text+0x7c8): undefined reference to `initrd_end'
>> ld: main.c:(.init.text+0x803): undefined reference to `initrd_start'
>>
>>
>> Full randconfig file is attached.
>>
>
>
--
~Randy
Reported-by: Randy Dunlap <rdunlap@infradead.org>
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: mmotm 2020-02-24-19-53 uploaded (drivers/platform/x86/intel_pmc_core.c)
2020-02-25 3:53 ` mmotm 2020-02-24-19-53 uploaded Andrew Morton
2020-02-25 6:16 ` mmotm 2020-02-24-19-53 uploaded (init/main.c: initrd*) Randy Dunlap
@ 2020-02-25 16:41 ` Randy Dunlap
2020-02-25 17:01 ` mmotm 2020-02-24-19-53 uploaded (objtool warning) Randy Dunlap
2 siblings, 0 replies; 95+ messages in thread
From: Randy Dunlap @ 2020-02-25 16:41 UTC (permalink / raw)
To: Andrew Morton, broonie, linux-fsdevel, linux-kernel, linux-mm,
linux-next, mhocko, mm-commits, sfr, Platform Driver,
Rajneesh Bhardwaj, Vishwanath Somayaji
[-- Attachment #1: Type: text/plain, Size: 1187 bytes --]
On 2/24/20 7:53 PM, Andrew Morton wrote:
> The mm-of-the-moment snapshot 2020-02-24-19-53 has been uploaded to
>
> http://www.ozlabs.org/~akpm/mmotm/
>
> mmotm-readme.txt says
>
> README for mm-of-the-moment:
>
> http://www.ozlabs.org/~akpm/mmotm/
>
> This is a snapshot of my -mm patch queue. Uploaded at random hopefully
> more than once a week.
>
on i386:
../drivers/platform/x86/intel_pmc_core.c: In function ‘pmc_core_resume’:
../drivers/platform/x86/intel_pmc_core.c:1327:3: error: implicit declaration of function ‘pmc_core_slps0_display’; did you mean ‘pmc_core_is_pc10_failed’? [-Werror=implicit-function-declaration]
pmc_core_slps0_display(pmcdev, dev, NULL);
^~~~~~~~~~~~~~~~~~~~~~
pmc_core_is_pc10_failed
../drivers/platform/x86/intel_pmc_core.c:1329:3: error: implicit declaration of function ‘pmc_core_lpm_display’; did you mean ‘pmc_core_suspend’? [-Werror=implicit-function-declaration]
pmc_core_lpm_display(pmcdev, dev, NULL, offset, "STATUS", maps);
^~~~~~~~~~~~~~~~~~~~
pmc_core_suspend
Full randconfig file is attached.
--
~Randy
Reported-by: Randy Dunlap <rdunlap@infradead.org>
[-- Attachment #2: config-r1066 --]
[-- Type: text/plain, Size: 132968 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 5.6.0-rc3-mm1 Kernel Configuration
#
#
# Compiler: gcc (SUSE Linux) 7.5.0
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=70500
CONFIG_CLANG_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_UAPI_HEADER_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_KERNEL_LZ4=y
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_IRQ_TIME_ACCOUNTING=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
CONFIG_PSI=y
# CONFIG_PSI_DEFAULT_DISABLED is not set
# end of CPU/Task time and stats accounting
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU=y
# end of RCU Subsystem
# CONFIG_IKCONFIG is not set
CONFIG_IKHEADERS=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_BPF is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
# CONFIG_NAMESPACES is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_FHANDLE is not set
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
# CONFIG_AIO is not set
# CONFIG_IO_URING is not set
# CONFIG_ADVISE_SYSCALLS is not set
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_BPF_SYSCALL=y
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_X86_32=y
CONFIG_FORCE_DYNAMIC_FTRACE=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
# CONFIG_SMP is not set
CONFIG_X86_FEATURE_NAMES=y
# CONFIG_X86_MPPARSE is not set
CONFIG_GOLDFISH=y
CONFIG_RETPOLINE=y
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_X86_RDC321X is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_X86_32_IRIS=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
# CONFIG_PARAVIRT is not set
# CONFIG_ARCH_CPUIDLE_HALTPOLL is not set
# CONFIG_PVH is not set
# CONFIG_M486SX is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=6
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_CPU_SUP_ZHAOXIN=y
# CONFIG_HPET_TIMER is not set
CONFIG_DMI=y
CONFIG_NR_CPUS_RANGE_BEGIN=1
CONFIG_NR_CPUS_RANGE_END=1
CONFIG_NR_CPUS_DEFAULT=1
CONFIG_NR_CPUS=1
CONFIG_UP_LATE_INIT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_ANCIENT_MCE=y
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
# CONFIG_PERF_EVENTS_INTEL_RAPL is not set
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
CONFIG_PERF_EVENTS_AMD_POWER=y
# end of Performance monitoring
CONFIG_X86_LEGACY_VM86=y
CONFIG_VM86=y
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX32=y
# CONFIG_X86_IOPL_IOPERM is not set
# CONFIG_TOSHIBA is not set
CONFIG_I8K=y
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_X86_PAE is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
# CONFIG_X86_PAT is not set
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_UMIP=y
# CONFIG_X86_INTEL_TSX_MODE_OFF is not set
CONFIG_X86_INTEL_TSX_MODE_ON=y
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_KEXEC=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_COMPAT_VDSO is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_MODIFY_LDT_SYSCALL=y
# end of Processor type and features
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_SUSPEND_SKIP_SYNC=y
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
# CONFIG_PM_WAKELOCKS_GC is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_DPM_WATCHDOG=y
CONFIG_DPM_WATCHDOG_TIMEOUT=120
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
CONFIG_ACPI_DEBUGGER=y
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
# CONFIG_ACPI_BUTTON is not set
CONFIG_ACPI_TINY_POWER_BUTTON=y
CONFIG_ACPI_TINY_POWER_BUTTON_SIGNAL=38
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_TAD is not set
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_IPMI is not set
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_PCI_SLOT is not set
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=y
CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_ERST_DEBUG=y
CONFIG_DPTF_POWER=y
CONFIG_PMIC_OPREGION=y
CONFIG_XPOWER_PMIC_OPREGION=y
CONFIG_CHT_WC_PMIC_OPREGION=y
CONFIG_ACPI_CONFIGFS=y
CONFIG_TPS68470_PMIC_OPREGION=y
CONFIG_X86_PM_TIMER=y
# CONFIG_SFI is not set
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_AMD_FREQ_SENSITIVITY=y
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
CONFIG_X86_P4_CLOCKMOD=y
CONFIG_X86_CPUFREQ_NFORCE2=y
CONFIG_X86_LONGRUN=y
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_GOV_TEO=y
# end of CPU Idle
# CONFIG_INTEL_IDLE is not set
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
CONFIG_PCI_GOBIOS=y
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_BIOS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
CONFIG_OLPC=y
# CONFIG_OLPC_XO1_PM is not set
# CONFIG_OLPC_XO15_SCI is not set
CONFIG_ALIX=y
# CONFIG_NET5501 is not set
# CONFIG_GEOS is not set
CONFIG_AMD_NB=y
# CONFIG_X86_SYSFB is not set
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
CONFIG_COMPAT_32=y
# end of Binary Emulations
CONFIG_HAVE_ATOMIC_IOMAP=y
#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_FW_CFG_SYSFS is not set
CONFIG_GOOGLE_FIRMWARE=y
CONFIG_GOOGLE_SMI=y
# CONFIG_GOOGLE_COREBOOT_TABLE is not set
CONFIG_GOOGLE_MEMCONSOLE=y
CONFIG_GOOGLE_MEMCONSOLE_X86_LEGACY=y
CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_VHOST_NET is not set
CONFIG_VHOST_VSOCK=y
CONFIG_VHOST=y
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=y
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_ISA_BUS_API=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
#
# GCOV-based kernel profiling
#
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_PLUGIN_HOSTCC=""
CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_MODULES_TREE_LOOKUP=y
# CONFIG_BLOCK is not set
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
# CONFIG_BINFMT_SCRIPT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_COREDUMP is not set
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
# CONFIG_COMPACTION is not set
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CLEANCACHE=y
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
CONFIG_CMA_AREAS=7
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
CONFIG_Z3FOLD=y
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_FRAME_VECTOR=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# end of Memory Management options
CONFIG_NET=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_UNIX_DIAG=y
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_INTERFACE is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_IPCOMP=y
# CONFIG_NET_KEY is not set
# CONFIG_SMC is not set
CONFIG_XDP_SOCKETS=y
# CONFIG_XDP_SOCKETS_DIAG is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
# CONFIG_IP_MULTIPLE_TABLES is not set
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_NET_UDP_TUNNEL=y
CONFIG_NET_FOU=y
CONFIG_NET_FOU_IP_TUNNELS=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_INET_RAW_DIAG=y
CONFIG_INET_DIAG_DESTROY=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_ESP_OFFLOAD is not set
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_IPV6_ILA=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_IPV6_VTI=y
CONFIG_IPV6_SIT=y
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_GRE is not set
CONFIG_IPV6_FOU=y
CONFIG_IPV6_FOU_TUNNEL=y
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_NETLABEL=y
# CONFIG_MPTCP is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
# CONFIG_BRIDGE_NETFILTER is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_INGRESS is not set
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_ACCT=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NETFILTER_NETLINK_OSF=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_LOG_COMMON=y
CONFIG_NF_LOG_NETDEV=y
CONFIG_NETFILTER_CONNCOUNT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_ZONES is not set
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
CONFIG_NF_CONNTRACK_TIMESTAMP=y
# CONFIG_NF_CONNTRACK_LABELS is not set
CONFIG_NF_CT_PROTO_DCCP=y
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=y
# CONFIG_NF_CONNTRACK_FTP is not set
CONFIG_NF_CONNTRACK_H323=y
# CONFIG_NF_CONNTRACK_IRC is not set
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
# CONFIG_NF_CONNTRACK_SNMP is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NF_CT_NETLINK_HELPER=y
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_SIP=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=y
CONFIG_NF_TABLES=y
# CONFIG_NF_TABLES_INET is not set
# CONFIG_NF_TABLES_NETDEV is not set
# CONFIG_NFT_NUMGEN is not set
# CONFIG_NFT_CT is not set
CONFIG_NFT_COUNTER=y
# CONFIG_NFT_CONNLIMIT is not set
# CONFIG_NFT_LOG is not set
# CONFIG_NFT_LIMIT is not set
CONFIG_NFT_MASQ=y
CONFIG_NFT_REDIR=y
CONFIG_NFT_TUNNEL=y
CONFIG_NFT_OBJREF=y
# CONFIG_NFT_QUEUE is not set
CONFIG_NFT_QUOTA=y
CONFIG_NFT_REJECT=y
CONFIG_NFT_COMPAT=y
CONFIG_NFT_HASH=y
# CONFIG_NFT_XFRM is not set
# CONFIG_NFT_SOCKET is not set
# CONFIG_NFT_OSF is not set
CONFIG_NFT_TPROXY=y
CONFIG_NFT_SYNPROXY=y
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CT=y
CONFIG_NETFILTER_XT_TARGET_DSCP=y
CONFIG_NETFILTER_XT_TARGET_HL=y
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
CONFIG_NETFILTER_XT_TARGET_LED=y
CONFIG_NETFILTER_XT_TARGET_LOG=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_NAT=y
CONFIG_NETFILTER_XT_TARGET_NETMAP=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
CONFIG_NETFILTER_XT_TARGET_NOTRACK=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_REDIRECT=y
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=y
CONFIG_NETFILTER_XT_TARGET_TEE=y
CONFIG_NETFILTER_XT_TARGET_TPROXY=y
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
CONFIG_NETFILTER_XT_MATCH_BPF=y
CONFIG_NETFILTER_XT_MATCH_CGROUP=y
CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
CONFIG_NETFILTER_XT_MATCH_DCCP=y
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ECN=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_HL=y
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_L2TP=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_NFACCT=y
CONFIG_NETFILTER_XT_MATCH_OSF=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_SOCKET=y
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
# end of Core Netfilter Configuration
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_SOCKET_IPV4=y
CONFIG_NF_TPROXY_IPV4=y
# CONFIG_NF_TABLES_IPV4 is not set
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=y
CONFIG_NF_LOG_ARP=y
CONFIG_NF_LOG_IPV4=y
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_H323=y
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_ECN=y
# CONFIG_IP_NF_MATCH_RPFILTER is not set
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_SYNPROXY=y
CONFIG_IP_NF_NAT=y
# CONFIG_IP_NF_TARGET_MASQUERADE is not set
# CONFIG_IP_NF_TARGET_NETMAP is not set
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_CLUSTERIP=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_SECURITY=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
# CONFIG_IP_NF_ARP_MANGLE is not set
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=y
CONFIG_NF_TPROXY_IPV6=y
# CONFIG_NF_TABLES_IPV6 is not set
CONFIG_NF_DUP_IPV6=y
CONFIG_NF_REJECT_IPV6=y
CONFIG_NF_LOG_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_MH=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_MATCH_SRH=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_TARGET_SYNPROXY=y
# CONFIG_IP6_NF_MANGLE is not set
# CONFIG_IP6_NF_RAW is not set
CONFIG_IP6_NF_SECURITY=y
CONFIG_IP6_NF_NAT=y
CONFIG_IP6_NF_TARGET_MASQUERADE=y
CONFIG_IP6_NF_TARGET_NPT=y
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_TABLES_BRIDGE=y
# CONFIG_NFT_BRIDGE_META is not set
# CONFIG_NF_LOG_BRIDGE is not set
CONFIG_NF_CONNTRACK_BRIDGE=y
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_BPFILTER is not set
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
# end of DCCP CCIDs Configuration
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# end of DCCP Kernel Hacking
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE=y
# CONFIG_SCTP_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=y
CONFIG_RDS=y
CONFIG_RDS_RDMA=y
CONFIG_RDS_TCP=y
CONFIG_RDS_DEBUG=y
CONFIG_TIPC=y
# CONFIG_TIPC_MEDIA_UDP is not set
# CONFIG_TIPC_CRYPTO is not set
CONFIG_TIPC_DIAG=y
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=y
# CONFIG_L2TP_V3 is not set
CONFIG_STP=y
CONFIG_MRP=y
CONFIG_BRIDGE=y
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
# CONFIG_BRIDGE_VLAN_FILTERING is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_LTPC=y
# CONFIG_COPS is not set
CONFIG_IPDDP=y
# CONFIG_IPDDP_ENCAP is not set
# CONFIG_X25 is not set
CONFIG_LAPB=y
CONFIG_PHONET=y
CONFIG_6LOWPAN=y
CONFIG_6LOWPAN_NHC=y
CONFIG_6LOWPAN_NHC_DEST=y
# CONFIG_6LOWPAN_NHC_FRAGMENT is not set
CONFIG_6LOWPAN_NHC_HOP=y
# CONFIG_6LOWPAN_NHC_IPV6 is not set
# CONFIG_6LOWPAN_NHC_MOBILITY is not set
CONFIG_6LOWPAN_NHC_ROUTING=y
# CONFIG_6LOWPAN_NHC_UDP is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_HOP is not set
CONFIG_6LOWPAN_GHC_UDP=y
CONFIG_6LOWPAN_GHC_ICMPV6=y
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=y
# CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE is not set
CONFIG_IEEE802154=y
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=y
CONFIG_IEEE802154_6LOWPAN=y
CONFIG_MAC802154=y
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFB=y
# CONFIG_NET_SCH_SFQ is not set
CONFIG_NET_SCH_TEQL=y
# CONFIG_NET_SCH_TBF is not set
CONFIG_NET_SCH_CBS=y
# CONFIG_NET_SCH_ETF is not set
CONFIG_NET_SCH_TAPRIO=y
# CONFIG_NET_SCH_GRED is not set
CONFIG_NET_SCH_DSMARK=y
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
CONFIG_NET_SCH_SKBPRIO=y
CONFIG_NET_SCH_CHOKE=y
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
# CONFIG_NET_SCH_FQ is not set
CONFIG_NET_SCH_HHF=y
CONFIG_NET_SCH_PIE=y
# CONFIG_NET_SCH_FQ_PIE is not set
# CONFIG_NET_SCH_PLUG is not set
CONFIG_NET_SCH_ETS=y
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ_CODEL is not set
CONFIG_DEFAULT_PFIFO_FAST=y
CONFIG_DEFAULT_NET_SCH="pfifo_fast"
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
# CONFIG_NET_CLS_FW is not set
CONFIG_NET_CLS_U32=y
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=y
CONFIG_NET_CLS_FLOWER=y
CONFIG_NET_CLS_MATCHALL=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
# CONFIG_NET_EMATCH_U32 is not set
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
# CONFIG_NET_EMATCH_CANID is not set
CONFIG_NET_EMATCH_IPT=y
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=y
CONFIG_OPENVSWITCH_GRE=y
CONFIG_VSOCKETS=y
# CONFIG_VSOCKETS_DIAG is not set
CONFIG_VSOCKETS_LOOPBACK=y
CONFIG_VMWARE_VMCI_VSOCKETS=y
# CONFIG_VIRTIO_VSOCKETS is not set
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_NET_NSH=y
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_NET_NCSI is not set
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
#
# Network testing
#
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
CONFIG_CAN=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
CONFIG_CAN_GW=y
CONFIG_CAN_J1939=y
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=y
# CONFIG_CAN_VXCAN is not set
# CONFIG_CAN_DEV is not set
CONFIG_CAN_DEBUG_DEVICES=y
# end of CAN Device Drivers
CONFIG_BT=y
CONFIG_BT_BREDR=y
# CONFIG_BT_RFCOMM is not set
# CONFIG_BT_BNEP is not set
CONFIG_BT_HIDP=y
# CONFIG_BT_HS is not set
# CONFIG_BT_LE is not set
# CONFIG_BT_LEDS is not set
# CONFIG_BT_SELFTEST is not set
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIDTL1=y
# CONFIG_BT_HCIBT3C is not set
CONFIG_BT_HCIBLUECARD=y
CONFIG_BT_HCIVHCI=y
# CONFIG_BT_MRVL is not set
CONFIG_BT_MTKUART=y
# end of Bluetooth device drivers
# CONFIG_AF_RXRPC is not set
CONFIG_AF_KCM=y
CONFIG_STREAM_PARSER=y
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
# CONFIG_RFKILL is not set
CONFIG_NET_9P=y
# CONFIG_NET_9P_VIRTIO is not set
# CONFIG_NET_9P_RDMA is not set
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
# CONFIG_CAIF_NETDEV is not set
# CONFIG_CAIF_USB is not set
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=y
CONFIG_NFC_DIGITAL=y
# CONFIG_NFC_NCI is not set
CONFIG_NFC_HCI=y
# CONFIG_NFC_SHDLC is not set
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_MEI_PHY=y
CONFIG_NFC_SIM=y
CONFIG_NFC_PORT100=y
CONFIG_NFC_PN544=y
CONFIG_NFC_PN544_MEI=y
CONFIG_NFC_PN533=y
CONFIG_NFC_PN533_USB=y
# CONFIG_NFC_PN533_I2C is not set
CONFIG_NFC_PN532_UART=y
CONFIG_NFC_MICROREAD=y
CONFIG_NFC_MICROREAD_MEI=y
# end of Near Field Communication (NFC) devices
CONFIG_PSAMPLE=y
CONFIG_NET_IFE=y
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_FAILOVER is not set
# CONFIG_ETHTOOL_NETLINK is not set
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
CONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not set
# CONFIG_EISA_PCI_EISA is not set
# CONFIG_EISA_VIRTUAL_ROOT is not set
# CONFIG_EISA_NAMES is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCIEASPM is not set
CONFIG_PCIE_PTM=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_QUIRKS is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_PCI_PF_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set
#
# PCI controller drivers
#
# CONFIG_PCI_FTPCI100 is not set
# CONFIG_PCI_HOST_GENERIC is not set
CONFIG_PCIE_XILINX=y
#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_EP=y
CONFIG_PCIE_DW_PLAT=y
# CONFIG_PCIE_DW_PLAT_HOST is not set
CONFIG_PCIE_DW_PLAT_EP=y
# CONFIG_PCIE_INTEL_GW is not set
CONFIG_PCI_MESON=y
# end of DesignWare PCI Core Support
#
# Cadence PCIe controllers support
#
CONFIG_PCIE_CADENCE=y
CONFIG_PCIE_CADENCE_HOST=y
CONFIG_PCIE_CADENCE_PLAT=y
CONFIG_PCIE_CADENCE_PLAT_HOST=y
# CONFIG_PCIE_CADENCE_PLAT_EP is not set
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
# CONFIG_PCI_ENDPOINT_CONFIGFS is not set
CONFIG_PCI_EPF_TEST=y
# end of PCI Endpoint
#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=y
# end of PCI switch controller drivers
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
# CONFIG_YENTA is not set
CONFIG_PD6729=y
# CONFIG_I82092 is not set
CONFIG_I82365=y
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
CONFIG_RAPIDIO_DMA_ENGINE=y
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_ENUM_BASIC=y
CONFIG_RAPIDIO_CHMAN=y
CONFIG_RAPIDIO_MPORT_CDEV=y
#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_TSI57X=y
CONFIG_RAPIDIO_CPS_XX=y
CONFIG_RAPIDIO_TSI568=y
# CONFIG_RAPIDIO_CPS_GEN2 is not set
# CONFIG_RAPIDIO_RXS_GEN3 is not set
# end of RapidIO Switch drivers
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_COMPRESS=y
# CONFIG_FW_CACHE is not set
# end of Firmware loader
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPMI=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SCCB=y
CONFIG_REGMAP_I3C=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
# end of Generic Driver Options
#
# Bus devices
#
CONFIG_SIMPLE_PM_BUS=y
# end of Bus devices
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
CONFIG_GNSS=y
CONFIG_GNSS_SERIAL=y
CONFIG_GNSS_MTK_SERIAL=y
CONFIG_GNSS_SIRF_SERIAL=y
CONFIG_GNSS_UBX_SERIAL=y
CONFIG_MTD=y
#
# Partition parsers
#
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# end of Partition parsers
#
# User Modules And Translation Layers
#
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SBC_GXX=y
CONFIG_MTD_SCx200_DOCFLASH=y
CONFIG_MTD_AMD76XROM=y
CONFIG_MTD_ICHXROM=y
CONFIG_MTD_ESB2ROM=y
CONFIG_MTD_CK804XROM=y
CONFIG_MTD_SCB2_FLASH=y
CONFIG_MTD_NETtel=y
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=y
# CONFIG_MTD_PCMCIA is not set
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=y
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
CONFIG_MTD_SLRAM=y
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers
CONFIG_MTD_NAND_CORE=y
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_ECC_SW_BCH=y
#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_PCI=y
CONFIG_MTD_NAND_DENALI_DT=y
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_CS553X is not set
CONFIG_MTD_NAND_MXIC=y
CONFIG_MTD_NAND_GPIO=y
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_CADENCE=y
#
# Misc
#
CONFIG_MTD_SM_COMMON=y
# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_RICOH=y
CONFIG_MTD_NAND_DISKONCHIP=y
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
# end of LPDDR & LPDDR2 PCM memory drivers
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_MTD_HYPERBUS=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_PROMTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_PC_FIFO is not set
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=y
CONFIG_PARPORT_AX88796=y
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPACPI=y
#
# NVME Support
#
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
# CONFIG_AD525X_DPOT is not set
CONFIG_DUMMY_IRQ=y
CONFIG_IBM_ASM=y
# CONFIG_PHANTOM is not set
CONFIG_TIFM_CORE=y
# CONFIG_TIFM_7XX1 is not set
CONFIG_ICS932S401=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
# CONFIG_CS5535_CLOCK_EVENT_SRC is not set
CONFIG_HP_ILO=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
# CONFIG_SENSORS_BH1770 is not set
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=y
# CONFIG_PCH_PHUB is not set
CONFIG_SRAM=y
CONFIG_PCI_ENDPOINT_TEST=y
CONFIG_XILINX_SDFEC=y
CONFIG_MISC_RTSX=y
CONFIG_PVPANIC=y
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_IDT_89HPESX=y
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=y
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
CONFIG_INTEL_MEI_TXE=y
CONFIG_VMWARE_VMCI=y
#
# Intel MIC & related support
#
CONFIG_VOP_BUS=y
CONFIG_VOP=y
CONFIG_VHOST_RING=y
# end of Intel MIC & related support
# CONFIG_ECHO is not set
CONFIG_MISC_ALCOR_PCI=y
CONFIG_MISC_RTSX_PCI=y
CONFIG_MISC_RTSX_USB=y
CONFIG_HABANA_AI=y
# end of Misc devices
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# end of SCSI device support
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_FIREWIRE_NOSY=y
# end of IEEE 1394 (FireWire) support
# CONFIG_MACINTOSH_DRIVERS is not set
# CONFIG_NETDEVICES is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_LEDS is not set
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADC=y
CONFIG_KEYBOARD_ADP5588=y
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
# CONFIG_KEYBOARD_TCA8418 is not set
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_LM8323=y
# CONFIG_KEYBOARD_LM8333 is not set
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=y
# CONFIG_KEYBOARD_MPR121 is not set
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_SAMSUNG=y
CONFIG_KEYBOARD_GOLDFISH_EVENTS=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_OMAP4 is not set
CONFIG_KEYBOARD_TC3589X=y
CONFIG_KEYBOARD_TM2_TOUCHKEY=y
# CONFIG_KEYBOARD_TWL4030 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CROS_EC is not set
# CONFIG_KEYBOARD_CAP11XX is not set
CONFIG_KEYBOARD_BCM=y
CONFIG_KEYBOARD_MTK_PMIC=y
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_CYAPA=y
CONFIG_MOUSE_ELAN_I2C=y
# CONFIG_MOUSE_ELAN_I2C_I2C is not set
# CONFIG_MOUSE_ELAN_I2C_SMBUS is not set
CONFIG_MOUSE_INPORT=y
# CONFIG_MOUSE_ATIXL is not set
CONFIG_MOUSE_LOGIBM=y
# CONFIG_MOUSE_PC110PAD is not set
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_GPIO=y
CONFIG_MOUSE_SYNAPTICS_I2C=y
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_PEGASUS=y
CONFIG_TABLET_SERIAL_WACOM4=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_ADC=y
CONFIG_TOUCHSCREEN_AR1021_I2C=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
# CONFIG_TOUCHSCREEN_BU21013 is not set
CONFIG_TOUCHSCREEN_BU21029=y
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=y
CONFIG_TOUCHSCREEN_CHIPONE_ICN8505=y
CONFIG_TOUCHSCREEN_CY8CTMG110=y
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
CONFIG_TOUCHSCREEN_DA9034=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
CONFIG_TOUCHSCREEN_EXC3000=y
CONFIG_TOUCHSCREEN_FUJITSU=y
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_HIDEEP is not set
CONFIG_TOUCHSCREEN_ILI210X=y
CONFIG_TOUCHSCREEN_S6SY761=y
CONFIG_TOUCHSCREEN_GUNZE=y
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
CONFIG_TOUCHSCREEN_ELAN=y
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
CONFIG_TOUCHSCREEN_MCS5000=y
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
CONFIG_TOUCHSCREEN_MTOUCH=y
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
CONFIG_TOUCHSCREEN_INEXIO=y
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_HTCPEN is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WDT87XX_I2C=y
CONFIG_TOUCHSCREEN_WM831X=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set
# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
# CONFIG_TOUCHSCREEN_USB_JASTEC is not set
CONFIG_TOUCHSCREEN_USB_ELO=y
# CONFIG_TOUCHSCREEN_USB_E2I is not set
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_TOUCHSCREEN_TSC2007_IIO=y
CONFIG_TOUCHSCREEN_RM_TS=y
# CONFIG_TOUCHSCREEN_SILEAD is not set
CONFIG_TOUCHSCREEN_SIS_I2C=y
CONFIG_TOUCHSCREEN_ST1232=y
CONFIG_TOUCHSCREEN_STMFTS=y
CONFIG_TOUCHSCREEN_SX8654=y
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
CONFIG_TOUCHSCREEN_ROHM_BU21023=y
# CONFIG_TOUCHSCREEN_IQS5XX is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM80X_ONKEY=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
CONFIG_INPUT_ATMEL_CAPTOUCH=y
CONFIG_INPUT_BMA150=y
CONFIG_INPUT_E3X0_BUTTON=y
# CONFIG_INPUT_MSM_VIBRATOR is not set
# CONFIG_INPUT_MAX77693_HAPTIC is not set
CONFIG_INPUT_MAX8997_HAPTIC=y
CONFIG_INPUT_MMA8450=y
CONFIG_INPUT_APANEL=y
CONFIG_INPUT_GP2A=y
CONFIG_INPUT_GPIO_BEEPER=y
CONFIG_INPUT_GPIO_DECODER=y
CONFIG_INPUT_GPIO_VIBRA=y
CONFIG_INPUT_WISTRON_BTNS=y
CONFIG_INPUT_ATLAS_BTNS=y
# CONFIG_INPUT_ATI_REMOTE2 is not set
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_KXTJ9=y
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=y
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_REGULATOR_HAPTIC=y
CONFIG_INPUT_RETU_PWRBUTTON=y
CONFIG_INPUT_TPS65218_PWRBUTTON=y
CONFIG_INPUT_AXP20X_PEK=y
# CONFIG_INPUT_TWL4030_PWRBUTTON is not set
CONFIG_INPUT_TWL4030_VIBRA=y
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PALMAS_PWRBUTTON=y
# CONFIG_INPUT_PCF50633_PMU is not set
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_PWM_BEEPER=y
# CONFIG_INPUT_PWM_VIBRA is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
CONFIG_INPUT_DA9055_ONKEY=y
# CONFIG_INPUT_DA9063_ONKEY is not set
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_ADXL34X=y
CONFIG_INPUT_ADXL34X_I2C=y
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_IDEAPAD_SLIDEBAR=y
CONFIG_INPUT_SOC_BUTTON_ARRAY=y
# CONFIG_INPUT_DRV260X_HAPTICS is not set
CONFIG_INPUT_DRV2665_HAPTICS=y
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_INPUT_RAVE_SP_PWRBUTTON is not set
CONFIG_INPUT_STPMIC1_ONKEY=y
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIO_APBPS2=y
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
# CONFIG_TTY is not set
# CONFIG_DEVMEM is not set
CONFIG_DEVKMEM=y
CONFIG_SERIAL_DEV_BUS=y
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
CONFIG_IPMI_SSIF=y
CONFIG_IPMI_WATCHDOG=y
# CONFIG_IPMI_POWEROFF is not set
# CONFIG_IPMB_DEVICE_INTERFACE is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_GEODE=y
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=y
# CONFIG_NVRAM is not set
CONFIG_DTLK=y
CONFIG_APPLICOM=y
CONFIG_SONYPI=y
#
# PCMCIA character devices
#
# CONFIG_CARDMAN_4000 is not set
CONFIG_CARDMAN_4040=y
CONFIG_SCR24X=y
# end of PCMCIA character devices
CONFIG_SCx200_GPIO=y
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
# CONFIG_TCG_TIS is not set
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
CONFIG_TCG_TIS_I2C_NUVOTON=y
# CONFIG_TCG_NSC is not set
CONFIG_TCG_ATMEL=y
CONFIG_TCG_INFINEON=y
# CONFIG_TCG_CRB is not set
CONFIG_TCG_VTPM_PROXY=y
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TELCLOCK is not set
# CONFIG_DEVPORT is not set
CONFIG_XILLYBUS=y
# CONFIG_XILLYBUS_PCIE is not set
CONFIG_XILLYBUS_OF=y
# end of Character devices
CONFIG_RANDOM_TRUST_CPU=y
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_ACPI_I2C_OPREGION is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_GPMUX=y
CONFIG_I2C_MUX_LTC4306=y
CONFIG_I2C_MUX_PCA9541=y
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_MUX_REG=y
CONFIG_I2C_DEMUX_PINCTRL=y
CONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
# end of I2C Algorithms
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_AMD_MP2=y
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=y
CONFIG_I2C_ISMT=y
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_CHT_WC=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NFORCE2_S4985=y
CONFIG_I2C_NVIDIA_GPU=y
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y
#
# ACPI drivers
#
CONFIG_I2C_SCMI=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
CONFIG_I2C_EG20T=y
CONFIG_I2C_EMEV2=y
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_KEMPLD is not set
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
# CONFIG_I2C_DLN2 is not set
CONFIG_I2C_PARPORT=y
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
CONFIG_I2C_TINY_USB=y
CONFIG_I2C_VIPERBOARD=y
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_ELEKTOR=y
CONFIG_I2C_PCA_ISA=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_SCx200_ACB=y
# end of I2C Hardware Bus support
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
CONFIG_I3C=y
CONFIG_CDNS_I3C_MASTER=y
CONFIG_DW_I3C_MASTER=y
# CONFIG_SPI is not set
CONFIG_SPMI=y
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
# CONFIG_HSI_CHAR is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_PARPORT=y
CONFIG_PPS_CLIENT_GPIO=y
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=y
# CONFIG_PTP_1588_CLOCK_IDTCM is not set
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_AS3722=y
# CONFIG_PINCTRL_AXP209 is not set
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_MCP23S08=y
CONFIG_PINCTRL_SINGLE=y
# CONFIG_PINCTRL_SX150X is not set
# CONFIG_PINCTRL_STMFX is not set
CONFIG_PINCTRL_MAX77620=y
CONFIG_PINCTRL_PALMAS=y
CONFIG_PINCTRL_OCELOT=y
# CONFIG_PINCTRL_BAYTRAIL is not set
# CONFIG_PINCTRL_CHERRYVIEW is not set
CONFIG_PINCTRL_LYNXPOINT=y
CONFIG_PINCTRL_INTEL=y
# CONFIG_PINCTRL_BROXTON is not set
CONFIG_PINCTRL_CANNONLAKE=y
CONFIG_PINCTRL_CEDARFORK=y
CONFIG_PINCTRL_DENVERTON=y
CONFIG_PINCTRL_GEMINILAKE=y
CONFIG_PINCTRL_ICELAKE=y
CONFIG_PINCTRL_LEWISBURG=y
CONFIG_PINCTRL_SUNRISEPOINT=y
CONFIG_PINCTRL_TIGERLAKE=y
CONFIG_PINCTRL_EQUILIBRIUM=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
CONFIG_GPIO_ALTERA=y
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_CADENCE=y
# CONFIG_GPIO_DWAPB is not set
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_GRGPIO is not set
CONFIG_GPIO_HLWD=y
CONFIG_GPIO_ICH=y
CONFIG_GPIO_LOGICVC=y
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MENZ127=y
# CONFIG_GPIO_SAMA5D2_PIOBU is not set
# CONFIG_GPIO_SIFIVE is not set
CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_VX855=y
# CONFIG_GPIO_XILINX is not set
CONFIG_GPIO_AMD_FCH=y
# end of Memory mapped GPIO drivers
#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
CONFIG_GPIO_IT87=y
CONFIG_GPIO_SCH=y
CONFIG_GPIO_SCH311X=y
CONFIG_GPIO_WINBOND=y
CONFIG_GPIO_WS16C48=y
# end of Port-mapped I/O GPIO drivers
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_GW_PLD=y
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
# CONFIG_GPIO_PCA953X is not set
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TPIC2810=y
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_BD70528=y
CONFIG_GPIO_CS5535=y
# CONFIG_GPIO_DA9055 is not set
CONFIG_GPIO_DLN2=y
CONFIG_GPIO_KEMPLD=y
CONFIG_GPIO_LP3943=y
CONFIG_GPIO_LP873X=y
# CONFIG_GPIO_LP87565 is not set
CONFIG_GPIO_MAX77620=y
CONFIG_GPIO_PALMAS=y
# CONFIG_GPIO_RC5T583 is not set
CONFIG_GPIO_TC3589X=y
# CONFIG_GPIO_TIMBERDALE is not set
# CONFIG_GPIO_TPS65086 is not set
CONFIG_GPIO_TPS65218=y
CONFIG_GPIO_TPS68470=y
CONFIG_GPIO_TQMX86=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=y
# CONFIG_GPIO_BT8XX is not set
CONFIG_GPIO_ML_IOH=y
CONFIG_GPIO_PCH=y
CONFIG_GPIO_PCI_IDIO_16=y
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# CONFIG_GPIO_SODAVILLE is not set
# end of PCI GPIO expanders
#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=y
# end of USB GPIO expanders
CONFIG_GPIO_MOCKUP=y
CONFIG_W1=y
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=y
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=y
CONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2405=y
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
# CONFIG_W1_SLAVE_DS2805 is not set
CONFIG_W1_SLAVE_DS2430=y
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2438=y
# CONFIG_W1_SLAVE_DS250X is not set
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_DS28E17=y
# end of 1-wire Slaves
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
# CONFIG_WM8350_POWER is not set
CONFIG_TEST_POWER=y
CONFIG_CHARGER_ADP5061=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2781=y
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_LEGO_EV3 is not set
# CONFIG_BATTERY_OLPC is not set
CONFIG_BATTERY_SBS=y
# CONFIG_CHARGER_SBS is not set
CONFIG_MANAGER_SBS=y
CONFIG_BATTERY_BQ27XXX=y
# CONFIG_BATTERY_BQ27XXX_I2C is not set
CONFIG_BATTERY_BQ27XXX_HDQ=y
CONFIG_BATTERY_DA9030=y
# CONFIG_CHARGER_DA9150 is not set
CONFIG_BATTERY_DA9150=y
CONFIG_AXP20X_POWER=y
CONFIG_AXP288_CHARGER=y
CONFIG_AXP288_FUEL_GAUGE=y
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_MAX1721X=y
CONFIG_CHARGER_PCF50633=y
CONFIG_CHARGER_ISP1704=y
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_TWL4030=y
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_LT3651=y
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ25890=y
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_CHARGER_TPS65090 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
CONFIG_CHARGER_UCS1002=y
CONFIG_CHARGER_BD70528=y
# CONFIG_CHARGER_WILCO is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=y
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=y
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM1177=y
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=y
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_AS370=y
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_AXI_FAN_CONTROL=y
CONFIG_SENSORS_K8TEMP=y
# CONFIG_SENSORS_K10TEMP is not set
CONFIG_SENSORS_FAM15H_POWER=y
CONFIG_SENSORS_APPLESMC=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ASPEED=y
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS620=y
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_DELL_SMM=y
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_G762=y
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_I5500=y
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_POWR1220=y
CONFIG_SENSORS_LINEAGE=y
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
CONFIG_SENSORS_LTC2990=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LTC4260=y
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6642=y
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
CONFIG_SENSORS_MAX31790=y
# CONFIG_SENSORS_MCP3021 is not set
CONFIG_SENSORS_MLXREG_FAN=y
CONFIG_SENSORS_TC654=y
CONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_NTC_THERMISTOR=y
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_NCT7802=y
CONFIG_SENSORS_NCT7904=y
# CONFIG_SENSORS_NPCM7XX is not set
CONFIG_SENSORS_PCF8591=y
CONFIG_PMBUS=y
# CONFIG_SENSORS_PMBUS is not set
CONFIG_SENSORS_ADM1275=y
# CONFIG_SENSORS_BEL_PFE is not set
CONFIG_SENSORS_IBM_CFFPS=y
CONFIG_SENSORS_INSPUR_IPSPS=y
# CONFIG_SENSORS_IR35221 is not set
CONFIG_SENSORS_IR38064=y
CONFIG_SENSORS_IRPS5401=y
CONFIG_SENSORS_ISL68137=y
CONFIG_SENSORS_LM25066=y
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=y
CONFIG_SENSORS_MAX16064=y
# CONFIG_SENSORS_MAX20730 is not set
# CONFIG_SENSORS_MAX20751 is not set
CONFIG_SENSORS_MAX31785=y
CONFIG_SENSORS_MAX34440=y
# CONFIG_SENSORS_MAX8688 is not set
# CONFIG_SENSORS_PXE1610 is not set
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_TPS53679=y
# CONFIG_SENSORS_UCD9000 is not set
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_XDPE122=y
# CONFIG_SENSORS_ZL6100 is not set
CONFIG_SENSORS_PWM_FAN=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=y
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_DME1737=y
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
CONFIG_SENSORS_SMSC47M1=y
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_INA3221=y
CONFIG_SENSORS_TC74=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP108=y
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83773G=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
# CONFIG_SENSORS_WM8350 is not set
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
# CONFIG_THERMAL_OF is not set
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_CLOCK_THERMAL is not set
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_THERMAL_MMIO is not set
# CONFIG_MAX77620_THERMAL is not set
CONFIG_DA9062_THERMAL=y
#
# Intel thermal drivers
#
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_INTEL_SOC_DTS_IOSF_CORE=y
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=y
CONFIG_ACPI_THERMAL_REL=y
CONFIG_INT3406_THERMAL=y
# end of ACPI INT340X thermal drivers
# CONFIG_INTEL_PCH_THERMAL is not set
# end of Intel thermal drivers
CONFIG_GENERIC_ADC_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_MFD_BCM590XX=y
# CONFIG_MFD_BD9571MWV is not set
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_CROS_EC_DEV=y
# CONFIG_MFD_MADERA is not set
CONFIG_PMIC_DA903X=y
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
CONFIG_MFD_DLN2=y
# CONFIG_MFD_MC13XXX_I2C is not set
CONFIG_MFD_HI6421_PMIC=y
CONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_INTEL_SOC_PMIC_BXTWC is not set
CONFIG_INTEL_SOC_PMIC_CHTWC=y
# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=y
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
CONFIG_MFD_MAX77620=y
# CONFIG_MFD_MAX77650 is not set
CONFIG_MFD_MAX77686=y
# CONFIG_MFD_MAX77693 is not set
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
# CONFIG_MFD_MAX8925 is not set
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6397=y
# CONFIG_MFD_MENF21BMC is not set
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
# CONFIG_PCF50633_GPIO is not set
CONFIG_MFD_RDC321X=y
CONFIG_MFD_RT5033=y
CONFIG_MFD_RC5T583=y
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
CONFIG_MFD_SEC_CORE=y
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_SKY81452 is not set
CONFIG_MFD_SMSC=y
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
CONFIG_AB3100_OTP=y
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
# CONFIG_MFD_TI_LMU is not set
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TPS68470=y
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TI_LP87565=y
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
CONFIG_MFD_TPS80031=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
CONFIG_MFD_TIMBERDALE=y
CONFIG_MFD_TC3589X=y
CONFIG_MFD_TQMX86=y
CONFIG_MFD_VX855=y
# CONFIG_MFD_LOCHNAGAR is not set
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
# CONFIG_MFD_WM8997 is not set
# CONFIG_MFD_WM8998 is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_WM8994 is not set
CONFIG_MFD_ROHM_BD718XX=y
CONFIG_MFD_ROHM_BD70528=y
# CONFIG_MFD_ROHM_BD71828 is not set
CONFIG_MFD_STPMIC1=y
CONFIG_MFD_STMFX=y
# CONFIG_MFD_WCD934X is not set
CONFIG_RAVE_SP_CORE=y
# end of Multifunction device drivers
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=y
# CONFIG_REGULATOR_88PM800 is not set
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ACT8945A=y
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
# CONFIG_REGULATOR_AAT2870 is not set
CONFIG_REGULATOR_AB3100=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_AXP20X=y
# CONFIG_REGULATOR_BCM590XX is not set
# CONFIG_REGULATOR_BD70528 is not set
CONFIG_REGULATOR_BD718XX=y
# CONFIG_REGULATOR_DA903X is not set
# CONFIG_REGULATOR_DA9055 is not set
CONFIG_REGULATOR_DA9062=y
CONFIG_REGULATOR_DA9063=y
# CONFIG_REGULATOR_DA9210 is not set
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
# CONFIG_REGULATOR_GPIO is not set
CONFIG_REGULATOR_HI6421=y
# CONFIG_REGULATOR_HI6421V530 is not set
# CONFIG_REGULATOR_ISL9305 is not set
CONFIG_REGULATOR_ISL6271A=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP873X=y
CONFIG_REGULATOR_LP8755=y
# CONFIG_REGULATOR_LP87565 is not set
# CONFIG_REGULATOR_LP8788 is not set
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX77620=y
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8907=y
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8997 is not set
# CONFIG_REGULATOR_MAX8998 is not set
CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MAX77802=y
CONFIG_REGULATOR_MCP16502=y
CONFIG_REGULATOR_MP5416=y
CONFIG_REGULATOR_MP8859=y
CONFIG_REGULATOR_MPQ7920=y
CONFIG_REGULATOR_MT6311=y
# CONFIG_REGULATOR_MT6323 is not set
CONFIG_REGULATOR_MT6397=y
# CONFIG_REGULATOR_PALMAS is not set
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=y
# CONFIG_REGULATOR_QCOM_SPMI is not set
# CONFIG_REGULATOR_RC5T583 is not set
CONFIG_REGULATOR_ROHM=y
CONFIG_REGULATOR_RT5033=y
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
# CONFIG_REGULATOR_SLG51000 is not set
CONFIG_REGULATOR_STPMIC1=y
# CONFIG_REGULATOR_SY8106A is not set
CONFIG_REGULATOR_SY8824X=y
# CONFIG_REGULATOR_TPS51632 is not set
CONFIG_REGULATOR_TPS62360=y
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_TPS65086=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_REGULATOR_TPS65132=y
# CONFIG_REGULATOR_TPS65218 is not set
CONFIG_REGULATOR_TPS80031=y
# CONFIG_REGULATOR_TWL4030 is not set
CONFIG_REGULATOR_VCTRL=y
CONFIG_REGULATOR_WM831X=y
# CONFIG_REGULATOR_WM8350 is not set
# CONFIG_REGULATOR_WM8400 is not set
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
# CONFIG_LIRC is not set
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
# CONFIG_IR_RC6_DECODER is not set
# CONFIG_IR_JVC_DECODER is not set
CONFIG_IR_SONY_DECODER=y
# CONFIG_IR_SANYO_DECODER is not set
# CONFIG_IR_SHARP_DECODER is not set
CONFIG_IR_MCE_KBD_DECODER=y
# CONFIG_IR_XMP_DECODER is not set
CONFIG_IR_IMON_DECODER=y
CONFIG_IR_RCMM_DECODER=y
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=y
CONFIG_IR_ENE=y
# CONFIG_IR_HIX5HD2 is not set
CONFIG_IR_IMON=y
CONFIG_IR_IMON_RAW=y
CONFIG_IR_MCEUSB=y
CONFIG_IR_ITE_CIR=y
CONFIG_IR_FINTEK=y
# CONFIG_IR_NUVOTON is not set
CONFIG_IR_REDRAT3=y
CONFIG_IR_STREAMZAP=y
CONFIG_IR_WINBOND_CIR=y
CONFIG_IR_IGORPLUGUSB=y
# CONFIG_IR_IGUANA is not set
CONFIG_IR_TTUSBIR=y
# CONFIG_RC_LOOPBACK is not set
# CONFIG_IR_GPIO_CIR is not set
CONFIG_IR_SERIAL=y
# CONFIG_IR_SERIAL_TRANSMITTER is not set
CONFIG_IR_SIR=y
CONFIG_RC_XBOX_DVD=y
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_MEDIA_CONTROLLER_REQUEST_API=y
CONFIG_VIDEO_DEV=y
# CONFIG_VIDEO_V4L2_SUBDEV_API is not set
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_V4L2_MEM2MEM_DEV=y
CONFIG_V4L2_FWNODE=y
#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_VIDEO_CADENCE=y
# CONFIG_VIDEO_ASPEED is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
CONFIG_VIDEO_SH_VEU=y
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_CEC_PLATFORM_DRIVERS is not set
# CONFIG_SDR_PLATFORM_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=y
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=y
CONFIG_I2C_SI470X=y
CONFIG_RADIO_SI4713=y
CONFIG_USB_SI4713=y
# CONFIG_PLATFORM_SI4713 is not set
CONFIG_I2C_SI4713=y
CONFIG_USB_MR800=y
CONFIG_USB_DSBR=y
CONFIG_RADIO_MAXIRADIO=y
CONFIG_RADIO_SHARK=y
CONFIG_RADIO_SHARK2=y
# CONFIG_USB_KEENE is not set
CONFIG_USB_RAREMONO=y
CONFIG_USB_MA901=y
CONFIG_RADIO_TEA5764=y
# CONFIG_RADIO_TEA5764_XTAL is not set
CONFIG_RADIO_SAA7706H=y
CONFIG_RADIO_TEF6862=y
# CONFIG_RADIO_TIMBERDALE is not set
# CONFIG_RADIO_WL1273 is not set
#
# Texas Instruments WL128x FM driver (ST based)
#
# end of Texas Instruments WL128x FM driver (ST based)
# CONFIG_V4L_RADIO_ISA_DRIVERS is not set
CONFIG_CYPRESS_FIRMWARE=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_V4L2=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_VIDEO_IR_I2C=y
#
# I2C Encoders, decoders, sensors and other helper chips
#
#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
CONFIG_VIDEO_TDA9840=y
CONFIG_VIDEO_TEA6415C=y
CONFIG_VIDEO_TEA6420=y
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_CS3308=y
# CONFIG_VIDEO_CS5345 is not set
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_TLV320AIC23B=y
CONFIG_VIDEO_UDA1342=y
CONFIG_VIDEO_WM8775=y
# CONFIG_VIDEO_WM8739 is not set
CONFIG_VIDEO_VP27SMPX=y
CONFIG_VIDEO_SONY_BTF_MPX=y
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=y
#
# Video decoders
#
CONFIG_VIDEO_ADV7183=y
CONFIG_VIDEO_BT819=y
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=y
CONFIG_VIDEO_KS0127=y
CONFIG_VIDEO_ML86V7667=y
# CONFIG_VIDEO_SAA7110 is not set
CONFIG_VIDEO_SAA711X=y
# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=y
# CONFIG_VIDEO_TVP7002 is not set
CONFIG_VIDEO_TW2804=y
# CONFIG_VIDEO_TW9903 is not set
CONFIG_VIDEO_TW9906=y
# CONFIG_VIDEO_TW9910 is not set
CONFIG_VIDEO_VPX3220=y
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=y
CONFIG_VIDEO_CX25840=y
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=y
# CONFIG_VIDEO_SAA7185 is not set
CONFIG_VIDEO_ADV7170=y
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
CONFIG_VIDEO_ADV7393=y
CONFIG_VIDEO_AK881X=y
CONFIG_VIDEO_THS8200=y
#
# Camera sensor devices
#
# CONFIG_VIDEO_OV2640 is not set
CONFIG_VIDEO_OV2659=y
CONFIG_VIDEO_OV2680=y
CONFIG_VIDEO_OV2685=y
# CONFIG_VIDEO_OV6650 is not set
CONFIG_VIDEO_OV5695=y
CONFIG_VIDEO_OV772X=y
# CONFIG_VIDEO_OV7640 is not set
CONFIG_VIDEO_OV7670=y
CONFIG_VIDEO_OV7740=y
CONFIG_VIDEO_OV9640=y
CONFIG_VIDEO_VS6624=y
CONFIG_VIDEO_MT9M111=y
CONFIG_VIDEO_MT9T112=y
# CONFIG_VIDEO_MT9V011 is not set
CONFIG_VIDEO_MT9V111=y
# CONFIG_VIDEO_SR030PC30 is not set
CONFIG_VIDEO_RJ54N1=y
#
# Lens drivers
#
CONFIG_VIDEO_AD5820=y
#
# Flash devices
#
CONFIG_VIDEO_ADP1653=y
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
# CONFIG_VIDEO_UPD64083 is not set
#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
#
# SDR tuner chips
#
CONFIG_SDR_MAX2175=y
#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
CONFIG_VIDEO_M52790=y
# CONFIG_VIDEO_I2C is not set
# end of I2C Encoders, decoders, sensors and other helper chips
#
# SPI helper chips
#
# end of SPI helper chips
CONFIG_MEDIA_TUNER=y
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=y
# CONFIG_MEDIA_TUNER_TDA18250 is not set
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2063=y
CONFIG_MEDIA_TUNER_MT2266=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MXL5005S=y
CONFIG_MEDIA_TUNER_MXL5007T=y
CONFIG_MEDIA_TUNER_MC44S803=y
# CONFIG_MEDIA_TUNER_MAX2165 is not set
CONFIG_MEDIA_TUNER_TDA18218=y
CONFIG_MEDIA_TUNER_FC0011=y
CONFIG_MEDIA_TUNER_FC0012=y
# CONFIG_MEDIA_TUNER_FC0013 is not set
# CONFIG_MEDIA_TUNER_TDA18212 is not set
# CONFIG_MEDIA_TUNER_E4000 is not set
CONFIG_MEDIA_TUNER_FC2580=y
# CONFIG_MEDIA_TUNER_M88RS6000T is not set
CONFIG_MEDIA_TUNER_TUA9001=y
CONFIG_MEDIA_TUNER_SI2157=y
CONFIG_MEDIA_TUNER_IT913X=y
CONFIG_MEDIA_TUNER_R820T=y
CONFIG_MEDIA_TUNER_MXL301RF=y
CONFIG_MEDIA_TUNER_QM1D1C0042=y
# CONFIG_MEDIA_TUNER_QM1D1B0004 is not set
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Tools to develop new frontends
#
# end of Customise DVB Frontends
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
#
# ARM devices
#
# end of ARM devices
#
# ACP (Audio CoProcessor) Configuration
#
# end of ACP (Audio CoProcessor) Configuration
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=y
# CONFIG_FB_CYBER2000_DDC is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=y
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
CONFIG_FB_OPENCORES=y
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_DEBUG=y
# CONFIG_FB_NVIDIA_BACKLIGHT is not set
CONFIG_FB_RIVA=y
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I740=y
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not set
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not set
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=y
# CONFIG_FB_S3_DDC is not set
CONFIG_FB_SAVAGE=y
CONFIG_FB_SAVAGE_I2C=y
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=y
# CONFIG_FB_SIS_300 is not set
CONFIG_FB_SIS_315=y
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=y
# CONFIG_FB_VT8623 is not set
CONFIG_FB_TRIDENT=y
# CONFIG_FB_ARK is not set
CONFIG_FB_PM3=y
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=y
CONFIG_FB_GEODE_GX=y
# CONFIG_FB_GEODE_GX1 is not set
CONFIG_FB_SM501=y
# CONFIG_FB_SMSCUFX is not set
CONFIG_FB_UDL=y
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_GOLDFISH=y
CONFIG_FB_VIRTUAL=y
CONFIG_FB_METRONOME=y
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
CONFIG_FB_SSD1307=y
CONFIG_FB_SM712=y
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_LM3533 is not set
CONFIG_BACKLIGHT_CARILLO_RANCH=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA903X=y
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_QCOM_WLED=y
CONFIG_BACKLIGHT_SAHARA=y
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_PCF50633=y
# CONFIG_BACKLIGHT_AAT2870 is not set
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LM3639=y
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_LP8788 is not set
# CONFIG_BACKLIGHT_OT200 is not set
CONFIG_BACKLIGHT_PANDORA=y
CONFIG_BACKLIGHT_AS3711=y
# CONFIG_BACKLIGHT_GPIO is not set
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
# CONFIG_BACKLIGHT_ARCXCNN is not set
# CONFIG_BACKLIGHT_RAVE_SP is not set
CONFIG_BACKLIGHT_LED=y
# end of Backlight & LCD device support
CONFIG_VGASTATE=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
# CONFIG_LOGO_LINUX_CLUT224 is not set
# end of Graphics support
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_SEQ_DEVICE=y
CONFIG_SND_RAWMIDI=y
# CONFIG_SND_OSSEMUL is not set
# CONFIG_SND_PCM_TIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_SEQ_MIDI_EVENT=y
CONFIG_SND_SEQ_MIDI=y
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_ISA is not set
# CONFIG_SND_PCI is not set
#
# HD-Audio
#
# end of HD-Audio
CONFIG_SND_HDA_PREALLOC_SIZE=0
# CONFIG_SND_USB is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SND_X86 is not set
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=y
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=y
# CONFIG_HID_ACRUX_FF is not set
# CONFIG_HID_APPLE is not set
CONFIG_HID_ASUS=y
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
# CONFIG_HID_CHERRY is not set
CONFIG_HID_CHICONY=y
CONFIG_HID_CORSAIR=y
CONFIG_HID_COUGAR=y
CONFIG_HID_MACALLY=y
CONFIG_HID_PRODIKEYS=y
# CONFIG_HID_CMEDIA is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELECOM=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GEMBIRD=y
CONFIG_HID_GFRM=y
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_WALTOP=y
CONFIG_HID_VIEWSONIC=y
# CONFIG_HID_GYRATION is not set
CONFIG_HID_ICADE=y
CONFIG_HID_ITE=y
CONFIG_HID_JABRA=y
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
CONFIG_HID_LED=y
CONFIG_HID_LENOVO=y
# CONFIG_HID_LOGITECH is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MALTRON=y
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_REDRAGON=y
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTI=y
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
CONFIG_HID_PICOLCD_FB=y
# CONFIG_HID_PICOLCD_BACKLIGHT is not set
# CONFIG_HID_PICOLCD_LCD is not set
# CONFIG_HID_PICOLCD_LEDS is not set
# CONFIG_HID_PICOLCD_CIR is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
CONFIG_HID_SAITEK=y
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEAM=y
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=y
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
# CONFIG_HID_UDRAW_PS3 is not set
CONFIG_HID_WIIMOTE=y
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=y
CONFIG_HID_ALPS=y
# end of Special HID drivers
#
# USB HID support
#
# CONFIG_USB_HID is not set
CONFIG_HID_PID=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=y
CONFIG_USB_MOUSE=y
# end of USB HID Boot Protocol drivers
# end of USB HID support
#
# I2C HID support
#
CONFIG_I2C_HID=y
# end of I2C HID support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
CONFIG_USB_ULPI_BUS=y
CONFIG_USB_CONN_GPIO=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_PCI is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_OTG=y
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_OTG_FSM=y
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PLATFORM=y
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_FOTG210_HCD=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_U132_HCD=y
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_HCD_SSB=y
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
# CONFIG_USBIP_CORE is not set
CONFIG_USB_CDNS3=y
# CONFIG_USB_CDNS3_HOST is not set
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_HOST=y
#
# Platform Glue Layer
#
#
# MUSB DMA mode
#
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_ULPI is not set
CONFIG_USB_DWC3_HOST=y
#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_OF_SIMPLE=y
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=y
CONFIG_USB_CYPRESS_CY7C63=y
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
CONFIG_USB_SISUSBVGA=y
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_YUREX=y
CONFIG_USB_EZUSB_FX2=y
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
CONFIG_USB_HSIC_USB4604=y
CONFIG_USB_LINK_LAYER_TEST=y
CONFIG_USB_CHAOSKEY=y
# CONFIG_USB_ATM is not set
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_GPIO_VBUS=y
# CONFIG_TAHVO_USB is not set
CONFIG_USB_ISP1301=y
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not set
CONFIG_TYPEC=y
CONFIG_TYPEC_TCPM=y
CONFIG_TYPEC_TCPCI=y
CONFIG_TYPEC_RT1711H=y
CONFIG_TYPEC_FUSB302=y
# CONFIG_TYPEC_UCSI is not set
CONFIG_TYPEC_HD3SS3220=y
CONFIG_TYPEC_TPS6598X=y
#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
# CONFIG_TYPEC_MUX_PI3USB30532 is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support
#
# USB Type-C Alternate Mode drivers
#
CONFIG_TYPEC_DP_ALTMODE=y
CONFIG_TYPEC_NVIDIA_ALTMODE=y
# end of USB Type-C Alternate Mode drivers
CONFIG_USB_ROLE_SWITCH=y
# CONFIG_USB_ROLES_INTEL_XHCI is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
CONFIG_LEDS_AAT1290=y
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_APU is not set
# CONFIG_LEDS_AS3645A is not set
CONFIG_LEDS_BCM6328=y
# CONFIG_LEDS_BCM6358 is not set
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3532=y
CONFIG_LEDS_LM3533=y
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3692X is not set
CONFIG_LEDS_LM3601X=y
# CONFIG_LEDS_MT6323 is not set
# CONFIG_LEDS_NET48XX is not set
CONFIG_LEDS_WRAP=y
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8501=y
CONFIG_LEDS_LP8788=y
CONFIG_LEDS_LP8860=y
CONFIG_LEDS_CLEVO_MAIL=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA955X_GPIO=y
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_WM831X_STATUS is not set
# CONFIG_LEDS_WM8350 is not set
CONFIG_LEDS_DA903X=y
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_INTEL_SS4200=y
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX8997=y
CONFIG_LEDS_LM355x=y
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_KTD2692=y
CONFIG_LEDS_IS31FL319X=y
# CONFIG_LEDS_IS31FL32XX is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
# CONFIG_LEDS_SYSCON is not set
CONFIG_LEDS_MLXCPLD=y
CONFIG_LEDS_MLXREG=y
CONFIG_LEDS_USER=y
# CONFIG_LEDS_NIC78BX is not set
CONFIG_LEDS_TI_LMU_COMMON=y
# CONFIG_LEDS_LM3697 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_ACTIVITY=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
# CONFIG_LEDS_TRIGGER_CAMERA is not set
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_NETDEV=y
CONFIG_LEDS_TRIGGER_PATTERN=y
CONFIG_LEDS_TRIGGER_AUDIO=y
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI=y
CONFIG_INFINIBAND_USER_MEM=y
# CONFIG_INFINIBAND_ON_DEMAND_PAGING is not set
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
CONFIG_INFINIBAND_MTHCA=y
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
# CONFIG_RDMA_RXE is not set
CONFIG_RDMA_SIW=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_DMA_OF=y
CONFIG_ALTERA_MSGDMA=y
CONFIG_DW_AXI_DMAC=y
CONFIG_FSL_EDMA=y
# CONFIG_INTEL_IDMA64 is not set
CONFIG_PCH_DMA=y
# CONFIG_PLX_DMA is not set
# CONFIG_TIMB_DMA is not set
CONFIG_QCOM_HIDMA_MGMT=y
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_DW_DMAC_PCI=y
CONFIG_DW_EDMA=y
CONFIG_DW_EDMA_PCIE=y
CONFIG_SF_PDMA=y
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_DMABUF_SELFTESTS=y
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_HEAPS_SYSTEM=y
# CONFIG_DMABUF_HEAPS_CMA is not set
# end of DMABUF options
CONFIG_AUXDISPLAY=y
CONFIG_HD44780=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=y
CONFIG_CFAG12864B_RATE=20
CONFIG_IMG_ASCII_LCD=y
CONFIG_HT16K33=y
CONFIG_PARPORT_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
# CONFIG_CHARLCD_BL_OFF is not set
# CONFIG_CHARLCD_BL_ON is not set
CONFIG_CHARLCD_BL_FLASH=y
CONFIG_PANEL=y
CONFIG_CHARLCD=y
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=y
CONFIG_UIO_SERCOS3=y
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
CONFIG_UIO_MF624=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_VIRTIO_INPUT=y
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# end of Microsoft Hyper-V guest support
CONFIG_GREYBUS=y
CONFIG_GREYBUS_ES2=y
CONFIG_STAGING=y
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
# CONFIG_COMEDI_MISC_DRIVERS is not set
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=y
CONFIG_COMEDI_PCL724=y
# CONFIG_COMEDI_PCL726 is not set
CONFIG_COMEDI_PCL730=y
# CONFIG_COMEDI_PCL812 is not set
CONFIG_COMEDI_PCL816=y
CONFIG_COMEDI_PCL818=y
# CONFIG_COMEDI_PCM3724 is not set
# CONFIG_COMEDI_AMPLC_DIO200_ISA is not set
CONFIG_COMEDI_AMPLC_PC236_ISA=y
CONFIG_COMEDI_AMPLC_PC263_ISA=y
CONFIG_COMEDI_RTI800=y
CONFIG_COMEDI_RTI802=y
CONFIG_COMEDI_DAC02=y
CONFIG_COMEDI_DAS16M1=y
CONFIG_COMEDI_DAS08_ISA=y
CONFIG_COMEDI_DAS16=y
# CONFIG_COMEDI_DAS800 is not set
CONFIG_COMEDI_DAS1800=y
CONFIG_COMEDI_DAS6402=y
CONFIG_COMEDI_DT2801=y
CONFIG_COMEDI_DT2811=y
CONFIG_COMEDI_DT2814=y
CONFIG_COMEDI_DT2815=y
CONFIG_COMEDI_DT2817=y
# CONFIG_COMEDI_DT282X is not set
CONFIG_COMEDI_DMM32AT=y
CONFIG_COMEDI_FL512=y
CONFIG_COMEDI_AIO_AIO12_8=y
# CONFIG_COMEDI_AIO_IIRO_16 is not set
CONFIG_COMEDI_II_PCI20KC=y
# CONFIG_COMEDI_C6XDIGIO is not set
# CONFIG_COMEDI_MPC624 is not set
CONFIG_COMEDI_ADQ12B=y
CONFIG_COMEDI_NI_AT_A2150=y
CONFIG_COMEDI_NI_AT_AO=y
CONFIG_COMEDI_NI_ATMIO=y
# CONFIG_COMEDI_NI_ATMIO16D is not set
CONFIG_COMEDI_NI_LABPC_ISA=y
# CONFIG_COMEDI_PCMAD is not set
CONFIG_COMEDI_PCMDA12=y
CONFIG_COMEDI_PCMMIO=y
CONFIG_COMEDI_PCMUIO=y
# CONFIG_COMEDI_MULTIQ3 is not set
# CONFIG_COMEDI_S526 is not set
CONFIG_COMEDI_PCI_DRIVERS=y
CONFIG_COMEDI_8255_PCI=y
CONFIG_COMEDI_ADDI_WATCHDOG=y
CONFIG_COMEDI_ADDI_APCI_1032=y
CONFIG_COMEDI_ADDI_APCI_1500=y
CONFIG_COMEDI_ADDI_APCI_1516=y
# CONFIG_COMEDI_ADDI_APCI_1564 is not set
CONFIG_COMEDI_ADDI_APCI_16XX=y
CONFIG_COMEDI_ADDI_APCI_2032=y
CONFIG_COMEDI_ADDI_APCI_2200=y
# CONFIG_COMEDI_ADDI_APCI_3120 is not set
CONFIG_COMEDI_ADDI_APCI_3501=y
# CONFIG_COMEDI_ADDI_APCI_3XXX is not set
CONFIG_COMEDI_ADL_PCI6208=y
# CONFIG_COMEDI_ADL_PCI7X3X is not set
CONFIG_COMEDI_ADL_PCI8164=y
CONFIG_COMEDI_ADL_PCI9111=y
# CONFIG_COMEDI_ADL_PCI9118 is not set
CONFIG_COMEDI_ADV_PCI1710=y
CONFIG_COMEDI_ADV_PCI1720=y
# CONFIG_COMEDI_ADV_PCI1723 is not set
CONFIG_COMEDI_ADV_PCI1724=y
CONFIG_COMEDI_ADV_PCI1760=y
# CONFIG_COMEDI_ADV_PCI_DIO is not set
CONFIG_COMEDI_AMPLC_DIO200_PCI=y
CONFIG_COMEDI_AMPLC_PC236_PCI=y
CONFIG_COMEDI_AMPLC_PC263_PCI=y
CONFIG_COMEDI_AMPLC_PCI224=y
# CONFIG_COMEDI_AMPLC_PCI230 is not set
CONFIG_COMEDI_CONTEC_PCI_DIO=y
CONFIG_COMEDI_DAS08_PCI=y
CONFIG_COMEDI_DT3000=y
# CONFIG_COMEDI_DYNA_PCI10XX is not set
# CONFIG_COMEDI_GSC_HPDI is not set
CONFIG_COMEDI_MF6X4=y
# CONFIG_COMEDI_ICP_MULTI is not set
# CONFIG_COMEDI_DAQBOARD2000 is not set
# CONFIG_COMEDI_JR3_PCI is not set
CONFIG_COMEDI_KE_COUNTER=y
CONFIG_COMEDI_CB_PCIDAS64=y
CONFIG_COMEDI_CB_PCIDAS=y
CONFIG_COMEDI_CB_PCIDDA=y
CONFIG_COMEDI_CB_PCIMDAS=y
CONFIG_COMEDI_CB_PCIMDDA=y
CONFIG_COMEDI_ME4000=y
CONFIG_COMEDI_ME_DAQ=y
CONFIG_COMEDI_NI_6527=y
# CONFIG_COMEDI_NI_65XX is not set
# CONFIG_COMEDI_NI_660X is not set
# CONFIG_COMEDI_NI_670X is not set
CONFIG_COMEDI_NI_LABPC_PCI=y
CONFIG_COMEDI_NI_PCIDIO=y
CONFIG_COMEDI_NI_PCIMIO=y
# CONFIG_COMEDI_RTD520 is not set
# CONFIG_COMEDI_S626 is not set
CONFIG_COMEDI_MITE=y
CONFIG_COMEDI_NI_TIOCMD=y
# CONFIG_COMEDI_PCMCIA_DRIVERS is not set
CONFIG_COMEDI_USB_DRIVERS=y
# CONFIG_COMEDI_DT9812 is not set
CONFIG_COMEDI_NI_USB6501=y
# CONFIG_COMEDI_USBDUX is not set
CONFIG_COMEDI_USBDUXFAST=y
CONFIG_COMEDI_USBDUXSIGMA=y
# CONFIG_COMEDI_VMK80XX is not set
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
CONFIG_COMEDI_8255_SA=y
# CONFIG_COMEDI_KCOMEDILIB is not set
CONFIG_COMEDI_AMPLC_DIO200=y
CONFIG_COMEDI_AMPLC_PC236=y
CONFIG_COMEDI_DAS08=y
CONFIG_COMEDI_ISADMA=y
CONFIG_COMEDI_NI_LABPC=y
CONFIG_COMEDI_NI_LABPC_ISADMA=y
CONFIG_COMEDI_NI_TIO=y
CONFIG_COMEDI_NI_ROUTING=y
# CONFIG_FB_OLPC_DCON is not set
#
# IIO staging drivers
#
#
# Accelerometers
#
# end of Accelerometers
#
# Analog to digital converters
#
# end of Analog to digital converters
#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=y
CONFIG_ADT7316_I2C=y
# end of Analog digital bi-direction converters
#
# Capacitance to digital converters
#
CONFIG_AD7150=y
CONFIG_AD7746=y
# end of Capacitance to digital converters
#
# Direct Digital Synthesis
#
# end of Direct Digital Synthesis
#
# Network Analyzer, Impedance Converters
#
# CONFIG_AD5933 is not set
# end of Network Analyzer, Impedance Converters
#
# Active energy metering IC
#
CONFIG_ADE7854=y
CONFIG_ADE7854_I2C=y
# end of Active energy metering IC
#
# Resolver to digital converters
#
# end of Resolver to digital converters
# end of IIO staging drivers
CONFIG_FB_SM750=y
#
# Speakup console speech
#
# end of Speakup console speech
CONFIG_STAGING_MEDIA=y
#
# soc_camera sensor drivers
#
#
# Android
#
# CONFIG_ION is not set
# end of Android
CONFIG_STAGING_BOARD=y
CONFIG_GOLDFISH_AUDIO=y
CONFIG_GS_FPGABOOT=y
CONFIG_UNISYSSPAR=y
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
CONFIG_MOST=y
CONFIG_MOST_CDEV=y
CONFIG_MOST_NET=y
# CONFIG_MOST_SOUND is not set
CONFIG_MOST_VIDEO=y
# CONFIG_MOST_DIM2 is not set
CONFIG_MOST_I2C=y
CONFIG_MOST_USB=y
CONFIG_GREYBUS_AUDIO=y
# CONFIG_GREYBUS_BOOTROM is not set
# CONFIG_GREYBUS_HID is not set
CONFIG_GREYBUS_LIGHT=y
CONFIG_GREYBUS_LOG=y
CONFIG_GREYBUS_LOOPBACK=y
CONFIG_GREYBUS_POWER=y
# CONFIG_GREYBUS_RAW is not set
CONFIG_GREYBUS_VIBRATOR=y
CONFIG_GREYBUS_BRIDGED_PHY=y
CONFIG_GREYBUS_GPIO=y
CONFIG_GREYBUS_I2C=y
# CONFIG_GREYBUS_PWM is not set
CONFIG_GREYBUS_USB=y
#
# Gasket devices
#
# end of Gasket devices
CONFIG_XIL_AXIS_FIFO=y
# CONFIG_FIELDBUS_DEV is not set
CONFIG_KPC2000=y
CONFIG_KPC2000_CORE=y
# CONFIG_KPC2000_I2C is not set
# CONFIG_KPC2000_DMA is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACPI_WMI=y
CONFIG_WMI_BMOF=y
# CONFIG_ALIENWARE_WMI is not set
CONFIG_HUAWEI_WMI=y
# CONFIG_INTEL_WMI_THUNDERBOLT is not set
# CONFIG_MXM_WMI is not set
CONFIG_PEAQ_WMI=y
CONFIG_XIAOMI_WMI=y
CONFIG_ACERHDF=y
CONFIG_ACER_WIRELESS=y
CONFIG_ACER_WMI=y
CONFIG_APPLE_GMUX=y
CONFIG_ASUS_LAPTOP=y
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_DCDBAS is not set
CONFIG_DELL_SMBIOS=y
CONFIG_DELL_SMBIOS_WMI=y
CONFIG_DELL_LAPTOP=y
CONFIG_DELL_RBU=y
CONFIG_DELL_SMO8800=y
CONFIG_DELL_WMI=y
CONFIG_DELL_WMI_DESCRIPTOR=y
CONFIG_DELL_WMI_AIO=y
CONFIG_DELL_WMI_LED=y
# CONFIG_FUJITSU_LAPTOP is not set
CONFIG_FUJITSU_TABLET=y
CONFIG_GPD_POCKET_FAN=y
CONFIG_HP_ACCEL=y
# CONFIG_HP_WIRELESS is not set
CONFIG_HP_WMI=y
CONFIG_TC1100_WMI=y
CONFIG_IBM_RTL=y
CONFIG_SENSORS_HDAPS=y
# CONFIG_THINKPAD_ACPI is not set
CONFIG_INTEL_ATOMISP2_PM=y
CONFIG_INTEL_HID_EVENT=y
# CONFIG_INTEL_INT0002_VGPIO is not set
CONFIG_INTEL_MENLOW=y
CONFIG_INTEL_VBTN=y
# CONFIG_SURFACE_3_BUTTON is not set
CONFIG_SURFACE_PRO3_BUTTON=y
CONFIG_MSI_WMI=y
CONFIG_XO15_EBOOK=y
CONFIG_PCENGINES_APU2=y
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_SAMSUNG_Q10=y
CONFIG_ACPI_TOSHIBA=y
CONFIG_TOSHIBA_BT_RFKILL=y
CONFIG_TOSHIBA_HAPS=y
# CONFIG_TOSHIBA_WMI is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_LG_LAPTOP is not set
CONFIG_PANASONIC_LAPTOP=y
# CONFIG_SYSTEM76_ACPI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
CONFIG_I2C_MULTI_INSTANTIATE=y
CONFIG_MLX_PLATFORM=y
CONFIG_INTEL_IPS=y
CONFIG_INTEL_RST=y
# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_INTEL_PMC_CORE=y
CONFIG_INTEL_PMC_IPC=y
# CONFIG_INTEL_PUNIT_IPC is not set
CONFIG_PMC_ATOM=y
# CONFIG_GOLDFISH_PIPE is not set
CONFIG_MFD_CROS_EC=y
CONFIG_CHROME_PLATFORMS=y
# CONFIG_CHROMEOS_LAPTOP is not set
# CONFIG_CHROMEOS_PSTORE is not set
CONFIG_CHROMEOS_TBMC=y
CONFIG_CROS_EC=y
# CONFIG_CROS_EC_I2C is not set
CONFIG_CROS_EC_RPMSG=y
CONFIG_CROS_EC_LPC=y
CONFIG_CROS_EC_PROTO=y
CONFIG_CROS_KBD_LED_BACKLIGHT=y
CONFIG_CROS_EC_CHARDEV=y
# CONFIG_CROS_EC_LIGHTBAR is not set
CONFIG_CROS_EC_VBC=y
CONFIG_CROS_EC_SENSORHUB=y
CONFIG_CROS_EC_SYSFS=y
# CONFIG_CROS_USBPD_NOTIFY is not set
CONFIG_WILCO_EC=y
CONFIG_WILCO_EC_DEBUGFS=y
CONFIG_WILCO_EC_EVENTS=y
# CONFIG_WILCO_EC_TELEMETRY is not set
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=y
CONFIG_MLXREG_IO=y
CONFIG_OLPC_EC=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_WM831X is not set
# CONFIG_CLK_HSDK is not set
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_MAX9485=y
CONFIG_COMMON_CLK_SI5341=y
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
CONFIG_COMMON_CLK_SI544=y
CONFIG_COMMON_CLK_SI570=y
# CONFIG_COMMON_CLK_CDCE706 is not set
CONFIG_COMMON_CLK_CDCE925=y
# CONFIG_COMMON_CLK_CS2000_CP is not set
CONFIG_COMMON_CLK_S2MPS11=y
CONFIG_COMMON_CLK_PALMAS=y
# CONFIG_COMMON_CLK_PWM is not set
CONFIG_COMMON_CLK_VC5=y
CONFIG_COMMON_CLK_BD718XX=y
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
# end of Common Clock Framework
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
CONFIG_CLKSRC_MMIO=y
CONFIG_MICROCHIP_PIT64B=y
# end of Clock Source drivers
CONFIG_MAILBOX=y
CONFIG_PLATFORM_MHU=y
# CONFIG_PCC is not set
# CONFIG_ALTERA_MBOX is not set
CONFIG_MAILBOX_TEST=y
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=y
# CONFIG_RPMSG_CHAR is not set
CONFIG_RPMSG_QCOM_GLINK_NATIVE=y
CONFIG_RPMSG_QCOM_GLINK_RPM=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Aspeed SoC drivers
#
# end of Aspeed SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
CONFIG_SOC_TI=y
#
# Xilinx SoC drivers
#
CONFIG_XILINX_VCU=y
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ADC_JACK is not set
CONFIG_EXTCON_AXP288=y
CONFIG_EXTCON_FSA9480=y
CONFIG_EXTCON_GPIO=y
# CONFIG_EXTCON_INTEL_INT3496 is not set
CONFIG_EXTCON_INTEL_CHT_WC=y
CONFIG_EXTCON_MAX3355=y
# CONFIG_EXTCON_MAX77843 is not set
# CONFIG_EXTCON_MAX8997 is not set
CONFIG_EXTCON_PALMAS=y
# CONFIG_EXTCON_PTN5150 is not set
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=y
# CONFIG_EXTCON_USBC_CROS_EC is not set
CONFIG_MEMORY=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
# CONFIG_IIO_BUFFER_HW_CONSUMER is not set
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=y
#
# Accelerometers
#
CONFIG_ADXL372=y
CONFIG_ADXL372_I2C=y
CONFIG_BMA180=y
# CONFIG_BMA400 is not set
# CONFIG_BMC150_ACCEL is not set
# CONFIG_DA280 is not set
# CONFIG_DA311 is not set
# CONFIG_DMARD06 is not set
CONFIG_DMARD09=y
CONFIG_DMARD10=y
CONFIG_HID_SENSOR_ACCEL_3D=y
CONFIG_KXSD9=y
CONFIG_KXSD9_I2C=y
CONFIG_KXCJK1013=y
CONFIG_MC3230=y
CONFIG_MMA7455=y
CONFIG_MMA7455_I2C=y
# CONFIG_MMA7660 is not set
# CONFIG_MMA8452 is not set
CONFIG_MMA9551_CORE=y
CONFIG_MMA9551=y
# CONFIG_MMA9553 is not set
CONFIG_MXC4005=y
CONFIG_MXC6255=y
CONFIG_STK8312=y
CONFIG_STK8BA50=y
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD7091R5=y
CONFIG_AD7291=y
# CONFIG_AD7606_IFACE_PARALLEL is not set
# CONFIG_AD799X is not set
# CONFIG_AXP20X_ADC is not set
CONFIG_AXP288_ADC=y
CONFIG_CC10001_ADC=y
CONFIG_DA9150_GPADC=y
CONFIG_DLN2_ADC=y
CONFIG_ENVELOPE_DETECTOR=y
CONFIG_HX711=y
# CONFIG_LP8788_ADC is not set
CONFIG_LTC2471=y
# CONFIG_LTC2485 is not set
# CONFIG_LTC2497 is not set
CONFIG_MAX1363=y
CONFIG_MAX9611=y
# CONFIG_MCP3422 is not set
CONFIG_MEN_Z188_ADC=y
CONFIG_NAU7802=y
CONFIG_PALMAS_GPADC=y
CONFIG_QCOM_VADC_COMMON=y
# CONFIG_QCOM_SPMI_IADC is not set
CONFIG_QCOM_SPMI_VADC=y
CONFIG_QCOM_SPMI_ADC5=y
CONFIG_SD_ADC_MODULATOR=y
CONFIG_TI_ADC081C=y
CONFIG_TI_ADS1015=y
# CONFIG_TI_AM335X_ADC is not set
# CONFIG_TWL4030_MADC is not set
CONFIG_TWL6030_GPADC=y
CONFIG_VF610_ADC=y
CONFIG_VIPERBOARD_ADC=y
# CONFIG_XILINX_XADC is not set
# end of Analog to digital converters
#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=y
# end of Analog Front Ends
#
# Amplifiers
#
# end of Amplifiers
#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=y
CONFIG_BME680=y
CONFIG_BME680_I2C=y
# CONFIG_CCS811 is not set
CONFIG_IAQCORE=y
# CONFIG_PMS7003 is not set
CONFIG_SENSIRION_SGP30=y
CONFIG_SPS30=y
# CONFIG_VZ89X is not set
# end of Chemical Sensors
# CONFIG_IIO_CROS_EC_SENSORS_CORE is not set
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=y
CONFIG_HID_SENSOR_IIO_TRIGGER=y
# end of Hid Sensor IIO Common
CONFIG_IIO_MS_SENSORS_I2C=y
#
# SSP Sensor Common
#
# end of SSP Sensor Common
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Digital to analog converters
#
CONFIG_AD5064=y
# CONFIG_AD5380 is not set
CONFIG_AD5446=y
CONFIG_AD5592R_BASE=y
CONFIG_AD5593R=y
# CONFIG_AD5696_I2C is not set
CONFIG_DPOT_DAC=y
# CONFIG_DS4424 is not set
CONFIG_M62332=y
CONFIG_MAX517=y
CONFIG_MAX5821=y
CONFIG_MCP4725=y
# CONFIG_TI_DAC5571 is not set
# CONFIG_VF610_DAC is not set
# end of Digital to analog converters
#
# IIO dummy driver
#
CONFIG_IIO_DUMMY_EVGEN=y
CONFIG_IIO_SIMPLE_DUMMY=y
CONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set
# end of IIO dummy driver
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#
CONFIG_BMG160=y
CONFIG_BMG160_I2C=y
CONFIG_FXAS21002C=y
CONFIG_FXAS21002C_I2C=y
CONFIG_HID_SENSOR_GYRO_3D=y
CONFIG_MPU3050=y
CONFIG_MPU3050_I2C=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_ITG3200=y
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#
CONFIG_AFE4404=y
CONFIG_MAX30100=y
CONFIG_MAX30102=y
# end of Heart Rate Monitors
# end of Health Sensors
#
# Humidity sensors
#
# CONFIG_AM2315 is not set
# CONFIG_DHT11 is not set
# CONFIG_HDC100X is not set
CONFIG_HID_SENSOR_HUMIDITY=y
# CONFIG_HTS221 is not set
CONFIG_HTU21=y
CONFIG_SI7005=y
CONFIG_SI7020=y
# end of Humidity sensors
#
# Inertial measurement units
#
CONFIG_BMI160=y
CONFIG_BMI160_I2C=y
CONFIG_FXOS8700=y
CONFIG_FXOS8700_I2C=y
CONFIG_KMX61=y
# CONFIG_INV_MPU6050_I2C is not set
CONFIG_IIO_ST_LSM6DSX=y
CONFIG_IIO_ST_LSM6DSX_I2C=y
CONFIG_IIO_ST_LSM6DSX_I3C=y
# end of Inertial measurement units
#
# Light sensors
#
# CONFIG_ACPI_ALS is not set
CONFIG_ADJD_S311=y
CONFIG_ADUX1020=y
# CONFIG_AL3320A is not set
CONFIG_APDS9300=y
CONFIG_APDS9960=y
CONFIG_BH1750=y
# CONFIG_BH1780 is not set
# CONFIG_CM32181 is not set
CONFIG_CM3232=y
# CONFIG_CM3323 is not set
CONFIG_CM3605=y
CONFIG_CM36651=y
CONFIG_GP2AP020A00F=y
# CONFIG_SENSORS_ISL29018 is not set
CONFIG_SENSORS_ISL29028=y
# CONFIG_ISL29125 is not set
CONFIG_HID_SENSOR_ALS=y
CONFIG_HID_SENSOR_PROX=y
# CONFIG_JSA1212 is not set
CONFIG_RPR0521=y
CONFIG_SENSORS_LM3533=y
# CONFIG_LTR501 is not set
CONFIG_LV0104CS=y
CONFIG_MAX44000=y
# CONFIG_MAX44009 is not set
CONFIG_NOA1305=y
CONFIG_OPT3001=y
CONFIG_PA12203001=y
CONFIG_SI1133=y
# CONFIG_SI1145 is not set
CONFIG_STK3310=y
CONFIG_ST_UVIS25=y
CONFIG_ST_UVIS25_I2C=y
CONFIG_TCS3414=y
CONFIG_TCS3472=y
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y
CONFIG_TSL2772=y
# CONFIG_TSL4531 is not set
CONFIG_US5182D=y
# CONFIG_VCNL4000 is not set
CONFIG_VCNL4035=y
CONFIG_VEML6030=y
# CONFIG_VEML6070 is not set
CONFIG_VL6180=y
CONFIG_ZOPT2201=y
# end of Light sensors
#
# Magnetometer sensors
#
# CONFIG_AK8974 is not set
CONFIG_AK8975=y
CONFIG_AK09911=y
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
CONFIG_MAG3110=y
CONFIG_HID_SENSOR_MAGNETOMETER_3D=y
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
# CONFIG_SENSORS_HMC5843_I2C is not set
# CONFIG_SENSORS_RM3100_I2C is not set
# end of Magnetometer sensors
#
# Multiplexers
#
CONFIG_IIO_MUX=y
# end of Multiplexers
#
# Inclinometer sensors
#
# CONFIG_HID_SENSOR_INCLINOMETER_3D is not set
# CONFIG_HID_SENSOR_DEVICE_ROTATION is not set
# end of Inclinometer sensors
#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=y
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
CONFIG_IIO_TIGHTLOOP_TRIGGER=y
CONFIG_IIO_SYSFS_TRIGGER=y
# end of Triggers - standalone
#
# Digital potentiometers
#
CONFIG_AD5272=y
CONFIG_DS1803=y
CONFIG_MAX5432=y
# CONFIG_MCP4018 is not set
# CONFIG_MCP4531 is not set
# CONFIG_TPL0102 is not set
# end of Digital potentiometers
#
# Digital potentiostats
#
CONFIG_LMP91000=y
# end of Digital potentiostats
#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
# CONFIG_BMP280 is not set
CONFIG_DLHL60D=y
# CONFIG_DPS310 is not set
CONFIG_HID_SENSOR_PRESS=y
CONFIG_HP03=y
# CONFIG_MPL115_I2C is not set
CONFIG_MPL3115=y
CONFIG_MS5611=y
# CONFIG_MS5611_I2C is not set
CONFIG_MS5637=y
# CONFIG_IIO_ST_PRESS is not set
CONFIG_T5403=y
# CONFIG_HP206C is not set
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
# end of Pressure sensors
#
# Lightning sensors
#
# end of Lightning sensors
#
# Proximity and distance sensors
#
# CONFIG_ISL29501 is not set
CONFIG_LIDAR_LITE_V2=y
CONFIG_MB1232=y
# CONFIG_PING is not set
# CONFIG_RFD77402 is not set
CONFIG_SRF04=y
CONFIG_SX9500=y
CONFIG_SRF08=y
CONFIG_VL53L0X_I2C=y
# end of Proximity and distance sensors
#
# Resolver to digital converters
#
# end of Resolver to digital converters
#
# Temperature sensors
#
# CONFIG_HID_SENSOR_TEMP is not set
CONFIG_MLX90614=y
# CONFIG_MLX90632 is not set
# CONFIG_TMP006 is not set
# CONFIG_TMP007 is not set
# CONFIG_TSYS01 is not set
# CONFIG_TSYS02D is not set
# end of Temperature sensors
# CONFIG_NTB is not set
CONFIG_VME_BUS=y
#
# VME Bridge Drivers
#
CONFIG_VME_CA91CX42=y
CONFIG_VME_TSI148=y
# CONFIG_VME_FAKE is not set
#
# VME Board Drivers
#
# CONFIG_VMIVME_7805 is not set
#
# VME Device Drivers
#
CONFIG_VME_USER=y
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_ATMEL_HLCDC_PWM=y
CONFIG_PWM_CROS_EC=y
# CONFIG_PWM_FSL_FTM is not set
CONFIG_PWM_LP3943=y
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
CONFIG_PWM_PCA9685=y
CONFIG_PWM_TWL=y
CONFIG_PWM_TWL_LED=y
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
# end of IRQ chip support
CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_BRCMSTB_RESCAL=y
CONFIG_RESET_INTEL_GW=y
# CONFIG_RESET_TI_SYSCON is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_BCM_KONA_USB2_PHY=y
# CONFIG_PHY_CADENCE_DP is not set
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_SIERRA is not set
CONFIG_PHY_FSL_IMX8MQ_USB=y
CONFIG_PHY_MIXEL_MIPI_DPHY=y
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
CONFIG_PHY_CPCAP_USB=y
CONFIG_PHY_MAPPHONE_MDM6600=y
# CONFIG_PHY_OCELOT_SERDES is not set
CONFIG_PHY_QCOM_USB_HS=y
CONFIG_PHY_QCOM_USB_HSIC=y
CONFIG_PHY_TUSB1210=y
CONFIG_PHY_INTEL_EMMC=y
# end of PHY Subsystem
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL_CORE=y
CONFIG_INTEL_RAPL=y
# CONFIG_IDLE_INJECT is not set
CONFIG_MCB=y
# CONFIG_MCB_PCI is not set
CONFIG_MCB_LPC=y
#
# Performance monitor support
#
# end of Performance monitor support
# CONFIG_RAS is not set
# CONFIG_USB4 is not set
#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android
# CONFIG_DAX is not set
# CONFIG_NVMEM is not set
#
# HW tracing support
#
CONFIG_STM=y
CONFIG_STM_PROTO_BASIC=y
CONFIG_STM_PROTO_SYS_T=y
# CONFIG_STM_DUMMY is not set
CONFIG_STM_SOURCE_CONSOLE=y
# CONFIG_STM_SOURCE_HEARTBEAT is not set
CONFIG_STM_SOURCE_FTRACE=y
CONFIG_INTEL_TH=y
CONFIG_INTEL_TH_PCI=y
CONFIG_INTEL_TH_ACPI=y
# CONFIG_INTEL_TH_GTH is not set
# CONFIG_INTEL_TH_STH is not set
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=y
# end of HW tracing support
CONFIG_FPGA=y
# CONFIG_ALTERA_PR_IP_CORE is not set
CONFIG_FPGA_MGR_ALTERA_CVP=y
CONFIG_FPGA_BRIDGE=y
CONFIG_ALTERA_FREEZE_BRIDGE=y
CONFIG_XILINX_PR_DECOUPLER=y
CONFIG_FPGA_REGION=y
# CONFIG_OF_FPGA_REGION is not set
CONFIG_FPGA_DFL=y
# CONFIG_FPGA_DFL_FME is not set
CONFIG_FPGA_DFL_AFU=y
# CONFIG_FPGA_DFL_PCI is not set
# CONFIG_FSI is not set
CONFIG_TEE=y
#
# TEE drivers
#
# end of TEE drivers
CONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#
# CONFIG_MUX_ADG792A is not set
CONFIG_MUX_GPIO=y
# CONFIG_MUX_MMIO is not set
# end of Multiplexer drivers
CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
CONFIG_INTERCONNECT=y
CONFIG_COUNTER=y
# CONFIG_FTM_QUADDEC is not set
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
# CONFIG_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_DEBUG=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_NFS_EXPORT=y
CONFIG_OVERLAY_FS_XINO_AUTO=y
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches
#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
# CONFIG_HUGETLBFS is not set
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
CONFIG_ECRYPT_FS=y
CONFIG_ECRYPT_FS_MESSAGING=y
# CONFIG_JFFS2_FS is not set
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
# CONFIG_UBIFS_FS_LZO is not set
# CONFIG_UBIFS_FS_ZLIB is not set
CONFIG_UBIFS_FS_ZSTD=y
# CONFIG_UBIFS_ATIME_SUPPORT is not set
CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBIFS_FS_SECURITY is not set
# CONFIG_UBIFS_FS_AUTHENTICATION is not set
CONFIG_CRAMFS=y
# CONFIG_CRAMFS_MTD is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_MTD=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFLATE_COMPRESS=y
CONFIG_PSTORE_LZO_COMPRESS=y
# CONFIG_PSTORE_LZ4_COMPRESS is not set
CONFIG_PSTORE_LZ4HC_COMPRESS=y
CONFIG_PSTORE_842_COMPRESS=y
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
# CONFIG_PSTORE_LZO_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_842_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
CONFIG_PSTORE_RAM=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
CONFIG_NLS_MAC_TURKISH=y
# CONFIG_NLS_UTF8 is not set
CONFIG_DLM=y
CONFIG_DLM_DEBUG=y
# CONFIG_UNICODE is not set
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_INFINIBAND is not set
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SMACK=y
CONFIG_SECURITY_SMACK_BRINGUP=y
# CONFIG_SECURITY_SMACK_APPEND_SIGNALS is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
CONFIG_SECURITY_YAMA=y
CONFIG_SECURITY_SAFESETID=y
CONFIG_SECURITY_LOCKDOWN_LSM=y
# CONFIG_SECURITY_LOCKDOWN_LSM_EARLY is not set
CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY is not set
# CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set
# CONFIG_INTEGRITY is not set
CONFIG_DEFAULT_SECURITY_SMACK=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity,smack,selinux,tomoyo,apparmor"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
# end of Memory initialization
# end of Kernel hardening options
# end of Security options
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECRDSA=y
# CONFIG_CRYPTO_CURVE25519 is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
CONFIG_CRYPTO_KEYWRAP=y
CONFIG_CRYPTO_NHPOLY1305=y
CONFIG_CRYPTO_ADIANTUM=y
# CONFIG_CRYPTO_ESSIV is not set
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
# CONFIG_CRYPTO_CRC32 is not set
CONFIG_CRYPTO_CRC32_PCLMUL=y
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=y
# CONFIG_CRYPTO_BLAKE2S is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_TGR192=y
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=y
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_HASH_INFO=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
# CONFIG_CRYPTO_LIB_BLAKE2S is not set
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA256=y
# CONFIG_CRYPTO_HW is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
# CONFIG_CORDIC is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_ENC16=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_DMA_VIRT_OPS=y
CONFIG_DMA_CMA=y
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_PERCENTAGE=0
# CONFIG_CMA_SIZE_SEL_MBYTES is not set
CONFIG_CMA_SIZE_SEL_PERCENTAGE=y
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_DIMLIB=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_32=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STRING_SELFTEST=y
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_SYMBOLIC_ERRNAME is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# end of printk and dmesg options
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_READABLE_ASM=y
CONFIG_HEADERS_INSTALL=y
CONFIG_OPTIMIZE_INLINING=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
# CONFIG_MAGIC_SYSRQ_SERIAL is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_UBSAN_ALIGNMENT=y
# end of Generic Kernel Debugging Instruments
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_PAGE_POISONING=y
# CONFIG_PAGE_POISONING_NO_SANITY is not set
CONFIG_PAGE_POISONING_ZERO=y
# CONFIG_DEBUG_PAGE_REF is not set
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
# CONFIG_DEBUG_OBJECTS_FREE is not set
CONFIG_DEBUG_OBJECTS_TIMERS=y
# CONFIG_DEBUG_OBJECTS_WORK is not set
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_DEBUG_SLAB=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
CONFIG_DEBUG_VM_RB=y
CONFIG_DEBUG_VM_PGFLAGS=y
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_KASAN_STACK=1
# end of Memory Debugging
CONFIG_DEBUG_SHIRQ=y
#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_INFO=y
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=y
CONFIG_WW_MUTEX_SELFTEST=y
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_KOBJECT_RELEASE=y
#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
CONFIG_RCU_PERF_TEST=y
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TRACE=y
CONFIG_RCU_EQS_DEBUG=y
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
# CONFIG_PREEMPTIRQ_EVENTS is not set
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
CONFIG_MMIOTRACE=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_UPROBE_EVENTS is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_HIST_TRIGGERS is not set
CONFIG_TRACE_EVENT_INJECT=y
CONFIG_TRACEPOINT_BENCHMARK=y
CONFIG_RING_BUFFER_BENCHMARK=y
CONFIG_TRACE_EVAL_MAP_FILE=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_EVENT_TRACE_STARTUP_TEST is not set
CONFIG_RING_BUFFER_STARTUP_TEST=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
#
# x86 Debugging
#
CONFIG_DEBUG_AID_FOR_SYZBOT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_EARLY_PRINTK_USB=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_EARLY_PRINTK_USB_XDBC=y
CONFIG_DEBUG_WX=y
CONFIG_DOUBLEFAULT=y
CONFIG_DEBUG_TLBFLUSH=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_CPA_DEBUG=y
CONFIG_DEBUG_ENTRY=y
CONFIG_DEBUG_NMI_SELFTEST=y
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_FRAME_POINTER=y
# CONFIG_UNWINDER_GUESS is not set
# end of x86 Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_TEST_LIST_SORT=y
CONFIG_TEST_SORT=y
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_RBTREE_TEST=y
CONFIG_REED_SOLOMON_TEST=y
CONFIG_INTERVAL_TREE_TEST=y
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_STRSCPY=y
CONFIG_TEST_KSTRTOX=y
CONFIG_TEST_PRINTF=y
CONFIG_TEST_BITMAP=y
CONFIG_TEST_BITFIELD=y
CONFIG_TEST_UUID=y
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_OVERFLOW is not set
CONFIG_TEST_RHASHTABLE=y
CONFIG_TEST_HASH=y
# CONFIG_TEST_IDA is not set
CONFIG_FIND_BIT_BENCHMARK=y
CONFIG_TEST_FIRMWARE=y
# CONFIG_TEST_UDELAY is not set
CONFIG_TEST_MEMCAT_P=y
# CONFIG_TEST_STACKINIT is not set
CONFIG_TEST_MEMINIT=y
CONFIG_MEMTEST=y
# end of Kernel Testing and Coverage
# end of Kernel hacking
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: mmotm 2020-02-24-19-53 uploaded (objtool warning)
2020-02-25 3:53 ` mmotm 2020-02-24-19-53 uploaded Andrew Morton
2020-02-25 6:16 ` mmotm 2020-02-24-19-53 uploaded (init/main.c: initrd*) Randy Dunlap
2020-02-25 16:41 ` mmotm 2020-02-24-19-53 uploaded (drivers/platform/x86/intel_pmc_core.c) Randy Dunlap
@ 2020-02-25 17:01 ` Randy Dunlap
2020-02-27 21:52 ` Josh Poimboeuf
2 siblings, 1 reply; 95+ messages in thread
From: Randy Dunlap @ 2020-02-25 17:01 UTC (permalink / raw)
To: Andrew Morton, broonie, linux-fsdevel, linux-kernel, linux-mm,
linux-next, mhocko, mm-commits, sfr, Josh Poimboeuf,
Peter Zijlstra
[-- Attachment #1: Type: text/plain, Size: 648 bytes --]
On 2/24/20 7:53 PM, Andrew Morton wrote:
> The mm-of-the-moment snapshot 2020-02-24-19-53 has been uploaded to
>
> http://www.ozlabs.org/~akpm/mmotm/
>
> mmotm-readme.txt says
>
> README for mm-of-the-moment:
>
> http://www.ozlabs.org/~akpm/mmotm/
>
> This is a snapshot of my -mm patch queue. Uploaded at random hopefully
> more than once a week.
>
Still seeing this one:
on x86_64:
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: i915_gem_execbuffer2_ioctl()+0x5b7: call to gen8_canonical_addr() with UACCESS enabled
Full randconfig file is attached.
--
~Randy
Reported-by: Randy Dunlap <rdunlap@infradead.org>
[-- Attachment #2: config-r1071 --]
[-- Type: text/plain, Size: 123038 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 5.6.0-rc3-mm1 Kernel Configuration
#
#
# Compiler: gcc (SUSE Linux) 7.5.0
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=70500
CONFIG_CLANG_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y
CONFIG_CC_DISABLE_WARN_MAYBE_UNINITIALIZED=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_UAPI_HEADER_TEST=y
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_KERNEL_LZ4=y
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_WATCH_QUEUE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_USELIB=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
CONFIG_IRQ_TIME_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU=y
# end of RCU Subsystem
CONFIG_BUILD_BIN2C=y
# CONFIG_IKCONFIG is not set
CONFIG_IKHEADERS=m
CONFIG_LOG_BUF_SHIFT=17
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_RDMA=y
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_HUGETLB=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
# CONFIG_MULTIUSER is not set
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_FHANDLE is not set
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_PCSPKR_PLATFORM is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
# CONFIG_TIMERFD is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_IO_URING is not set
# CONFIG_ADVISE_SYSCALLS is not set
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_BPF_SYSCALL=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
# CONFIG_SMP is not set
# CONFIG_X86_FEATURE_NAMES is not set
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
# CONFIG_RETPOLINE is not set
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_GOLDFISH=y
CONFIG_X86_INTEL_MID=y
CONFIG_IOSF_MBI=m
# CONFIG_IOSF_MBI_DEBUG is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
# CONFIG_PARAVIRT is not set
CONFIG_X86_HV_CALLBACK_VECTOR=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
CONFIG_PVH=y
# CONFIG_JAILHOUSE_GUEST is not set
CONFIG_ACRN_GUEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_APB_TIMER=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_NR_CPUS_RANGE_BEGIN=1
CONFIG_NR_CPUS_RANGE_END=1
CONFIG_NR_CPUS_DEFAULT=1
CONFIG_NR_CPUS=1
CONFIG_UP_LATE_INIT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=m
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
CONFIG_PERF_EVENTS_AMD_POWER=y
# end of Performance monitoring
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_X86_IOPL_IOPERM is not set
CONFIG_I8K=m
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
CONFIG_MICROCODE_AMD=y
# CONFIG_MICROCODE_OLD_INTERFACE is not set
CONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not set
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_X86_CPA_STATISTICS=y
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_UMIP=y
# CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS is not set
# CONFIG_X86_INTEL_TSX_MODE_OFF is not set
CONFIG_X86_INTEL_TSX_MODE_ON=y
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_SECCOMP is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
# CONFIG_KEXEC_SIG is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_RANDOMIZE_MEMORY is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
# CONFIG_LEGACY_VSYSCALL_NONE is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
CONFIG_CMDLINE_OVERRIDE=y
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# end of Processor type and features
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_PM is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
# CONFIG_ACPI is not set
CONFIG_SFI=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# end of CPU Idle
# CONFIG_INTEL_IDLE is not set
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_ISA_BUS=y
# CONFIG_ISA_DMA_API is not set
CONFIG_AMD_NB=y
# CONFIG_X86_SYSFB is not set
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
# CONFIG_IA32_EMULATION is not set
# CONFIG_X86_X32 is not set
# end of Binary Emulations
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set
CONFIG_EFI_EARLYCON=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_VHOST_SCSI=y
CONFIG_VHOST=y
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
CONFIG_STATIC_KEYS_SELFTEST=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
# CONFIG_STACKPROTECTOR is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_ISA_BUS_API=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_PLUGIN_HOSTCC=""
CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
CONFIG_MODULE_COMPRESS_XZ=y
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_TRIM_UNUSED_KSYMS=y
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_RQ_ALLOC_TIME=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_DEV_THROTTLING_LOW=y
CONFIG_BLK_CMDLINE_PARSER=y
CONFIG_BLK_WBT=y
CONFIG_BLK_CGROUP_IOLATENCY=y
CONFIG_BLK_CGROUP_IOCOST=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_DEBUG_FS is not set
CONFIG_BLK_SED_OPAL=y
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
#
# Executable file formats
#
# CONFIG_BINFMT_ELF is not set
CONFIG_BINFMT_SCRIPT=m
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
# CONFIG_MEMORY_HOTREMOVE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
# CONFIG_COMPACTION is not set
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CLEANCACHE=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
CONFIG_ZPOOL=y
# CONFIG_ZBUD is not set
CONFIG_Z3FOLD=m
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_HMM_MIRROR=y
CONFIG_FRAME_VECTOR=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_MAPPING_DIRTY_HELPERS=y
# end of Memory Management options
# CONFIG_NET is not set
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
CONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not set
# CONFIG_EISA_PCI_EISA is not set
CONFIG_EISA_VIRTUAL_ROOT=y
# CONFIG_EISA_NAMES is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCIEASPM is not set
# CONFIG_PCIE_PTM is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=m
# CONFIG_PCI_PF_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set
#
# PCI controller drivers
#
#
# DesignWare PCI Core Support
#
# end of DesignWare PCI Core Support
#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=m
# end of PCI switch controller drivers
# CONFIG_PCCARD is not set
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
CONFIG_RAPIDIO_DMA_ENGINE=y
# CONFIG_RAPIDIO_DEBUG is not set
CONFIG_RAPIDIO_ENUM_BASIC=m
CONFIG_RAPIDIO_CHMAN=m
CONFIG_RAPIDIO_MPORT_CDEV=m
#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_TSI57X=m
CONFIG_RAPIDIO_CPS_XX=m
CONFIG_RAPIDIO_TSI568=y
CONFIG_RAPIDIO_CPS_GEN2=m
# CONFIG_RAPIDIO_RXS_GEN3 is not set
# end of RapidIO Switch drivers
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_FW_LOADER_COMPRESS=y
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=m
CONFIG_REGMAP_SPMI=m
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_I3C=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
# end of Bus devices
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
# CONFIG_BLK_DEV is not set
#
# NVME Support
#
CONFIG_NVME_CORE=y
# CONFIG_BLK_DEV_NVME is not set
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
CONFIG_NVME_TARGET=y
CONFIG_NVME_TARGET_LOOP=y
# CONFIG_NVME_TARGET_FC is not set
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_DUMMY_IRQ=y
# CONFIG_IBM_ASM is not set
CONFIG_PHANTOM=y
CONFIG_INTEL_MID_PTI=m
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HP_ILO=m
CONFIG_APDS9802ALS=y
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1770 is not set
CONFIG_SENSORS_APDS990X=y
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=y
# CONFIG_SRAM is not set
CONFIG_PCI_ENDPOINT_TEST=y
CONFIG_XILINX_SDFEC=m
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
CONFIG_EEPROM_EE1004=y
# end of EEPROM support
CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_INTEL_MEI_HDCP=m
CONFIG_VMWARE_VMCI=y
#
# Intel MIC & related support
#
# CONFIG_INTEL_MIC_BUS is not set
# CONFIG_SCIF_BUS is not set
CONFIG_VOP_BUS=y
# CONFIG_VOP is not set
# end of Intel MIC & related support
CONFIG_GENWQE=y
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
CONFIG_ECHO=y
CONFIG_MISC_ALCOR_PCI=m
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
CONFIG_UACCE=m
# end of Misc devices
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_SRP_ATTRS=y
# end of SCSI Transports
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# end of SCSI device support
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BCACHE=y
CONFIG_BCACHE_DEBUG=y
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
# CONFIG_BLK_DEV_DM is not set
CONFIG_TARGET_CORE=y
CONFIG_TCM_IBLOCK=m
# CONFIG_TCM_FILEIO is not set
CONFIG_TCM_PSCSI=m
# CONFIG_LOOPBACK_TARGET is not set
CONFIG_SBP_TARGET=m
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
# CONFIG_FIREWIRE_SBP2 is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
# CONFIG_MACINTOSH_DRIVERS is not set
# CONFIG_NVM is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=m
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_CYAPA=y
CONFIG_MOUSE_ELAN_I2C=y
CONFIG_MOUSE_ELAN_I2C_I2C=y
# CONFIG_MOUSE_ELAN_I2C_SMBUS is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_GPIO=y
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=m
# CONFIG_JOYSTICK_COBRA is not set
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
# CONFIG_JOYSTICK_IFORCE_232 is not set
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=y
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=y
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_WALKERA0701=y
CONFIG_JOYSTICK_PXRC=m
CONFIG_JOYSTICK_FSIA6B=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=y
# CONFIG_TABLET_USB_GTCO is not set
CONFIG_TABLET_USB_HANWANG=y
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_PEGASUS is not set
CONFIG_TABLET_SERIAL_WACOM4=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
CONFIG_TOUCHSCREEN_88PM860X=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_ADC=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_ATMEL_MXT_T37=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
CONFIG_TOUCHSCREEN_BU21013=m
CONFIG_TOUCHSCREEN_BU21029=y
CONFIG_TOUCHSCREEN_CY8CTMG110=m
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=m
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_EXC3000 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GOODIX=y
CONFIG_TOUCHSCREEN_HIDEEP=y
CONFIG_TOUCHSCREEN_ILI210X=y
# CONFIG_TOUCHSCREEN_S6SY761 is not set
CONFIG_TOUCHSCREEN_GUNZE=m
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
CONFIG_TOUCHSCREEN_ELAN=m
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=y
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
CONFIG_TOUCHSCREEN_MMS114=y
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_INEXIO=y
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_PIXCIR=m
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
CONFIG_TOUCHSCREEN_WM831X=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
# CONFIG_TOUCHSCREEN_WM9713 is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
# CONFIG_TOUCHSCREEN_USB_EGALAX is not set
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
# CONFIG_TOUCHSCREEN_USB_ITM is not set
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
# CONFIG_TOUCHSCREEN_USB_GOTOP is not set
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set
CONFIG_TOUCHSCREEN_USB_NEXIO=y
# CONFIG_TOUCHSCREEN_USB_EASYTOUCH is not set
CONFIG_TOUCHSCREEN_TOUCHIT213=m
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
CONFIG_TOUCHSCREEN_TSC2004=y
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
CONFIG_TOUCHSCREEN_SIS_I2C=m
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMFTS is not set
CONFIG_TOUCHSCREEN_SX8654=m
CONFIG_TOUCHSCREEN_TPS6507X=m
CONFIG_TOUCHSCREEN_ZET6223=y
CONFIG_TOUCHSCREEN_ZFORCE=m
CONFIG_TOUCHSCREEN_ROHM_BU21023=m
CONFIG_TOUCHSCREEN_IQS5XX=m
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_SERIO_GPIO_PS2=y
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=m
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=m
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
# CONFIG_VT_CONSOLE is not set
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=y
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=m
# CONFIG_SYNCLINKMP is not set
CONFIG_SYNCLINK_GT=y
# CONFIG_NOZOMI is not set
# CONFIG_ISI is not set
# CONFIG_N_HDLC is not set
CONFIG_TRACE_ROUTER=y
CONFIG_TRACE_SINK=y
# CONFIG_NULL_TTY is not set
CONFIG_LDISC_AUTOLOAD=y
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_16550A_VARIANTS=y
CONFIG_SERIAL_8250_FINTEK=y
# CONFIG_SERIAL_8250_DMA is not set
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_EXAR=m
# CONFIG_SERIAL_8250_MEN_MCB is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_DWLIB=y
# CONFIG_SERIAL_8250_DW is not set
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_LPSS=m
CONFIG_SERIAL_8250_MID=m
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_KGDB_NMI is not set
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
# CONFIG_SERIAL_SAMSUNG_CONSOLE is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_ALTERA_UART_CONSOLE is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=m
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_SERIAL_FSL_LINFLEXUART=y
# CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE is not set
CONFIG_SERIAL_MEN_Z135=m
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=m
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
# CONFIG_IPMB_DEVICE_INTERFACE is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
# CONFIG_APPLICOM is not set
CONFIG_MWAVE=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_XILLYBUS=m
# end of Character devices
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_LTC4306=m
# CONFIG_I2C_MUX_PCA9541 is not set
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_MUX_REG=m
# CONFIG_I2C_MUX_MLXCPLD is not set
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NFORCE2_S4985=m
CONFIG_I2C_NVIDIA_GPU=y
# CONFIG_I2C_SIS5595 is not set
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=m
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=m
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PCI=y
CONFIG_I2C_EMEV2=y
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_KEMPLD=m
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_SIMTEC=y
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
# CONFIG_I2C_DLN2 is not set
CONFIG_I2C_PARPORT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
CONFIG_I2C_TAOS_EVM=y
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIPERBOARD=m
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
CONFIG_I2C_CROS_EC_TUNNEL=y
# end of I2C Hardware Bus support
# CONFIG_I2C_STUB is not set
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# end of I2C support
CONFIG_I3C=y
# CONFIG_CDNS_I3C_MASTER is not set
# CONFIG_DW_I3C_MASTER is not set
# CONFIG_SPI is not set
CONFIG_SPMI=m
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=m
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
CONFIG_NTP_PPS=y
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=y
# CONFIG_PPS_CLIENT_PARPORT is not set
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_AMD=m
CONFIG_PINCTRL_MCP23S08=y
# CONFIG_PINCTRL_SX150X is not set
CONFIG_PINCTRL_MERRIFIELD=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_GENERIC=m
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_DWAPB=m
CONFIG_GPIO_EXAR=m
CONFIG_GPIO_GENERIC_PLATFORM=m
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_MENZ127 is not set
CONFIG_GPIO_SIOX=m
CONFIG_GPIO_VX855=y
# CONFIG_GPIO_XILINX is not set
CONFIG_GPIO_AMD_FCH=m
# end of Memory mapped GPIO drivers
#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_IT87=y
# CONFIG_GPIO_SCH is not set
CONFIG_GPIO_SCH311X=y
CONFIG_GPIO_WINBOND=m
CONFIG_GPIO_WS16C48=y
# end of Port-mapped I/O GPIO drivers
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCF857X=m
CONFIG_GPIO_TPIC2810=y
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
CONFIG_GPIO_BD9571MWV=m
CONFIG_GPIO_DLN2=m
CONFIG_GPIO_JANZ_TTL=y
CONFIG_GPIO_KEMPLD=y
# CONFIG_GPIO_LP3943 is not set
# CONFIG_GPIO_LP873X is not set
# CONFIG_GPIO_MSIC is not set
# CONFIG_GPIO_PALMAS is not set
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_TPS65912=m
# CONFIG_GPIO_TWL6040 is not set
CONFIG_GPIO_UCB1400=m
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=m
CONFIG_GPIO_WM8994=y
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_INTEL_MID is not set
CONFIG_GPIO_MERRIFIELD=y
CONFIG_GPIO_ML_IOH=m
CONFIG_GPIO_PCI_IDIO_16=m
CONFIG_GPIO_PCIE_IDIO_24=m
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders
#
# USB GPIO expanders
#
# CONFIG_GPIO_VIPERBOARD is not set
# end of USB GPIO expanders
# CONFIG_GPIO_MOCKUP is not set
CONFIG_W1=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_DS1WM=y
# CONFIG_W1_MASTER_GPIO is not set
CONFIG_W1_MASTER_SGI=m
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2405=y
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=m
# CONFIG_W1_SLAVE_DS2406 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
CONFIG_W1_SLAVE_DS2805=m
CONFIG_W1_SLAVE_DS2430=y
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
# CONFIG_W1_SLAVE_DS2438 is not set
# CONFIG_W1_SLAVE_DS250X is not set
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=m
CONFIG_W1_SLAVE_DS28E17=y
# end of 1-wire Slaves
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=m
CONFIG_WM831X_POWER=m
CONFIG_WM8350_POWER=y
CONFIG_TEST_POWER=y
# CONFIG_BATTERY_88PM860X is not set
CONFIG_CHARGER_ADP5061=y
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_SBS is not set
CONFIG_CHARGER_SBS=m
CONFIG_MANAGER_SBS=m
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=m
CONFIG_BATTERY_BQ27XXX_HDQ=m
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
CONFIG_CHARGER_DA9150=m
CONFIG_BATTERY_DA9150=m
CONFIG_CHARGER_AXP20X=m
# CONFIG_BATTERY_AXP20X is not set
CONFIG_AXP20X_POWER=m
# CONFIG_AXP288_FUEL_GAUGE is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_BATTERY_MAX1721X=y
CONFIG_CHARGER_PCF50633=m
CONFIG_CHARGER_ISP1704=m
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_CHARGER_LP8727=m
CONFIG_CHARGER_GPIO=y
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_LT3651=m
CONFIG_CHARGER_MAX14577=m
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=m
CONFIG_CHARGER_BQ25890=m
CONFIG_CHARGER_SMB347=y
CONFIG_BATTERY_GAUGE_LTC2941=m
# CONFIG_CHARGER_RT9455 is not set
CONFIG_CHARGER_CROS_USBPD=m
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM1177=m
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_AS370=m
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_AXI_FAN_CONTROL=y
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
# CONFIG_SENSORS_FAM15H_POWER is not set
CONFIG_SENSORS_APPLESMC=m
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ASPEED=y
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DELL_SMM=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=y
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_G762=m
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IIO_HWMON is not set
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
CONFIG_SENSORS_POWR1220=y
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LTC2945=m
# CONFIG_SENSORS_LTC2947_I2C is not set
CONFIG_SENSORS_LTC2990=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX16065=m
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31730 is not set
CONFIG_SENSORS_MAX6621=m
CONFIG_SENSORS_MAX6639=m
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
CONFIG_SENSORS_MAX31790=m
CONFIG_SENSORS_MCP3021=y
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_MENF21BMC_HWMON is not set
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=y
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=m
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775=y
# CONFIG_SENSORS_NCT7802 is not set
CONFIG_SENSORS_NCT7904=m
# CONFIG_SENSORS_NPCM7XX is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=m
# CONFIG_SENSORS_ADM1275 is not set
CONFIG_SENSORS_BEL_PFE=y
CONFIG_SENSORS_IBM_CFFPS=m
CONFIG_SENSORS_INSPUR_IPSPS=m
CONFIG_SENSORS_IR35221=y
CONFIG_SENSORS_IR38064=m
# CONFIG_SENSORS_IRPS5401 is not set
CONFIG_SENSORS_ISL68137=y
CONFIG_SENSORS_LM25066=y
CONFIG_SENSORS_LTC2978=y
# CONFIG_SENSORS_LTC2978_REGULATOR is not set
CONFIG_SENSORS_LTC3815=y
CONFIG_SENSORS_MAX16064=y
CONFIG_SENSORS_MAX20730=m
CONFIG_SENSORS_MAX20751=m
# CONFIG_SENSORS_MAX31785 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_PXE1610 is not set
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_TPS53679=y
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_XDPE122=y
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT15=y
# CONFIG_SENSORS_SHT21 is not set
CONFIG_SENSORS_SHT3x=y
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=m
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_STTS751=m
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_INA3221=m
CONFIG_SENSORS_TC74=y
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
CONFIG_SENSORS_TMP103=y
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=y
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=m
CONFIG_SENSORS_W83795_FANCTRL=y
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_WM831X=m
CONFIG_SENSORS_WM8350=m
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_CLOCK_THERMAL is not set
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=y
#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
CONFIG_INTEL_PCH_THERMAL=m
# end of Intel thermal drivers
CONFIG_GENERIC_ADC_THERMAL=m
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_BCM590XX is not set
CONFIG_MFD_BD9571MWV=m
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_CROS_EC_DEV=m
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
CONFIG_MFD_DLN2=y
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
CONFIG_HTC_I2CPLD=y
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
CONFIG_MFD_INTEL_LPSS=m
CONFIG_MFD_INTEL_LPSS_PCI=m
CONFIG_MFD_INTEL_MSIC=y
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=m
# CONFIG_MFD_88PM805 is not set
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=m
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6397=m
CONFIG_MFD_MENF21BMC=y
CONFIG_MFD_VIPERBOARD=m
CONFIG_MFD_RETU=m
CONFIG_MFD_PCF50633=m
# CONFIG_PCF50633_ADC is not set
# CONFIG_PCF50633_GPIO is not set
CONFIG_UCB1400_CORE=m
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=m
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
CONFIG_MFD_SMSC=y
CONFIG_ABX500_CORE=y
# CONFIG_AB3100_CORE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
CONFIG_MFD_LP3943=m
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_TI_LMU=y
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=m
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=m
CONFIG_MFD_TPS65912_I2C=m
CONFIG_MFD_TPS80031=y
# CONFIG_TWL4030_CORE is not set
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_LM3533=m
# CONFIG_MFD_TQMX86 is not set
CONFIG_MFD_VX855=y
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
# CONFIG_MFD_WCD934X is not set
# end of Multifunction device drivers
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_88PG86X=m
# CONFIG_REGULATOR_88PM800 is not set
CONFIG_REGULATOR_88PM8607=m
CONFIG_REGULATOR_ACT8865=m
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_REGULATOR_ANATOP=m
CONFIG_REGULATOR_AAT2870=y
# CONFIG_REGULATOR_AXP20X is not set
# CONFIG_REGULATOR_BD9571MWV is not set
CONFIG_REGULATOR_DA9062=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
# CONFIG_REGULATOR_FAN53555 is not set
CONFIG_REGULATOR_GPIO=m
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=y
# CONFIG_REGULATOR_LM363X is not set
# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_LP872X=m
CONFIG_REGULATOR_LP8755=m
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=m
# CONFIG_REGULATOR_MAX14577 is not set
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8925=y
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_MP8859=y
# CONFIG_REGULATOR_MT6311 is not set
CONFIG_REGULATOR_MT6323=m
CONFIG_REGULATOR_MT6397=m
CONFIG_REGULATOR_PALMAS=y
# CONFIG_REGULATOR_PCF50633 is not set
# CONFIG_REGULATOR_PFUZE100 is not set
CONFIG_REGULATOR_PV88060=m
CONFIG_REGULATOR_PV88080=m
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_QCOM_SPMI=m
CONFIG_REGULATOR_S2MPA01=m
CONFIG_REGULATOR_S2MPS11=y
# CONFIG_REGULATOR_S5M8767 is not set
CONFIG_REGULATOR_SLG51000=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=y
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
CONFIG_REGULATOR_TPS6507X=m
CONFIG_REGULATOR_TPS65132=m
CONFIG_REGULATOR_TPS6586X=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TPS65912=m
# CONFIG_REGULATOR_TPS80031 is not set
CONFIG_REGULATOR_WM831X=m
CONFIG_REGULATOR_WM8350=m
# CONFIG_REGULATOR_WM8994 is not set
CONFIG_RC_CORE=m
# CONFIG_RC_MAP is not set
# CONFIG_LIRC is not set
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=m
# CONFIG_IR_RC5_DECODER is not set
# CONFIG_IR_RC6_DECODER is not set
CONFIG_IR_JVC_DECODER=m
# CONFIG_IR_SONY_DECODER is not set
CONFIG_IR_SANYO_DECODER=m
# CONFIG_IR_SHARP_DECODER is not set
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_IR_IMON_DECODER=m
CONFIG_IR_RCMM_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_IMON=m
CONFIG_IR_IMON_RAW=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_REDRAT3=m
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_IGORPLUGUSB is not set
CONFIG_IR_IGUANA=m
# CONFIG_IR_TTUSBIR is not set
# CONFIG_RC_LOOPBACK is not set
# CONFIG_IR_SERIAL is not set
CONFIG_IR_SIR=m
CONFIG_RC_XBOX_DVD=m
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_V4L2_I2C=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_PCI_SKELETON=y
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_FWNODE=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_SG=y
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_DVB_CORE=y
# CONFIG_DVB_MMAP is not set
CONFIG_TTPCI_EEPROM=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set
#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
CONFIG_VIDEO_SOLO6X10=m
# CONFIG_VIDEO_TW5864 is not set
# CONFIG_VIDEO_TW68 is not set
CONFIG_VIDEO_TW686X=m
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
# CONFIG_VIDEO_CX18_ALSA is not set
# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
# CONFIG_VIDEO_CX88_BLACKBIRD is not set
CONFIG_VIDEO_CX88_DVB=m
# CONFIG_VIDEO_CX88_ENABLE_VP3054 is not set
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
# CONFIG_VIDEO_SAA7134 is not set
CONFIG_VIDEO_SAA7164=m
#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110=y
# CONFIG_DVB_AV7110_OSD is not set
# CONFIG_DVB_BUDGET_CORE is not set
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG=y
# CONFIG_DVB_PLUTO2 is not set
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
CONFIG_DVB_PT3=y
# CONFIG_MANTIS_CORE is not set
CONFIG_DVB_NGENE=m
# CONFIG_DVB_DDBRIDGE is not set
# CONFIG_DVB_SMIPCIE is not set
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_CAFE_CCIC=y
CONFIG_VIDEO_VIA_CAMERA=m
# CONFIG_VIDEO_CADENCE is not set
CONFIG_VIDEO_ASPEED=y
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
# CONFIG_SDR_PLATFORM_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=y
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=y
# CONFIG_I2C_SI470X is not set
CONFIG_RADIO_SI4713=m
CONFIG_USB_SI4713=m
CONFIG_PLATFORM_SI4713=m
CONFIG_I2C_SI4713=m
CONFIG_RADIO_SI476X=m
# CONFIG_USB_MR800 is not set
CONFIG_USB_DSBR=y
# CONFIG_RADIO_MAXIRADIO is not set
CONFIG_RADIO_SHARK=y
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_TEF6862=y
# CONFIG_RADIO_WL1273 is not set
#
# Texas Instruments WL128x FM driver (ST based)
#
# end of Texas Instruments WL128x FM driver (ST based)
#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_V4L2=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_VIDEOBUF2_DMA_SG=y
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
CONFIG_VIDEO_SAA7146=y
CONFIG_VIDEO_SAA7146_VV=y
#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m
#
# I2C Encoders, decoders, sensors and other helper chips
#
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=y
CONFIG_VIDEO_TDA7432=y
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=y
CONFIG_VIDEO_TEA6420=y
# CONFIG_VIDEO_MSP3400 is not set
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=y
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_TLV320AIC23B=m
# CONFIG_VIDEO_UDA1342 is not set
# CONFIG_VIDEO_WM8775 is not set
CONFIG_VIDEO_WM8739=m
# CONFIG_VIDEO_VP27SMPX is not set
# CONFIG_VIDEO_SONY_BTF_MPX is not set
#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
#
# Video decoders
#
CONFIG_VIDEO_ADV7183=y
# CONFIG_VIDEO_BT819 is not set
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=m
# CONFIG_VIDEO_KS0127 is not set
CONFIG_VIDEO_ML86V7667=m
CONFIG_VIDEO_SAA7110=y
CONFIG_VIDEO_SAA711X=m
# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=y
CONFIG_VIDEO_TVP7002=y
# CONFIG_VIDEO_TW2804 is not set
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m
CONFIG_VIDEO_TW9910=m
CONFIG_VIDEO_VPX3220=y
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
# CONFIG_VIDEO_SAA7185 is not set
CONFIG_VIDEO_ADV7170=m
# CONFIG_VIDEO_ADV7175 is not set
CONFIG_VIDEO_ADV7343=y
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_AK881X is not set
CONFIG_VIDEO_THS8200=y
#
# Camera sensor devices
#
CONFIG_VIDEO_OV2640=m
CONFIG_VIDEO_OV2659=m
# CONFIG_VIDEO_OV6650 is not set
CONFIG_VIDEO_OV5695=y
# CONFIG_VIDEO_OV772X is not set
# CONFIG_VIDEO_OV7640 is not set
CONFIG_VIDEO_OV7670=y
# CONFIG_VIDEO_OV7740 is not set
CONFIG_VIDEO_OV9640=y
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9M111 is not set
CONFIG_VIDEO_MT9T112=m
# CONFIG_VIDEO_MT9V011 is not set
CONFIG_VIDEO_MT9V111=y
CONFIG_VIDEO_SR030PC30=m
CONFIG_VIDEO_RJ54N1=y
#
# Lens drivers
#
#
# Flash devices
#
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
# CONFIG_VIDEO_UPD64083 is not set
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m
#
# SDR tuner chips
#
# CONFIG_SDR_MAX2175 is not set
#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set
CONFIG_VIDEO_I2C=y
# end of I2C Encoders, decoders, sensors and other helper chips
#
# SPI helper chips
#
# end of SPI helper chips
CONFIG_MEDIA_TUNER=y
#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_SIMPLE is not set
# CONFIG_MEDIA_TUNER_TDA18250 is not set
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
# CONFIG_MEDIA_TUNER_MT20XX is not set
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_QT1010=m
# CONFIG_MEDIA_TUNER_XC2028 is not set
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=m
# CONFIG_MEDIA_TUNER_MXL5005S is not set
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=y
# CONFIG_MEDIA_TUNER_TDA18218 is not set
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
# CONFIG_MEDIA_TUNER_FC0013 is not set
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=y
# CONFIG_MEDIA_TUNER_TUA9001 is not set
# CONFIG_MEDIA_TUNER_SI2157 is not set
CONFIG_MEDIA_TUNER_IT913X=y
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_MXL301RF=y
CONFIG_MEDIA_TUNER_QM1D1C0042=y
CONFIG_MEDIA_TUNER_QM1D1B0004=m
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=y
CONFIG_DVB_STB6100=y
# CONFIG_DVB_STV090x is not set
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=y
# CONFIG_DVB_STV6111 is not set
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
#
# CONFIG_DVB_DRXK is not set
# CONFIG_DVB_TDA18271C2DD is not set
CONFIG_DVB_SI2165=m
# CONFIG_DVB_MN88472 is not set
CONFIG_DVB_MN88473=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=y
CONFIG_DVB_CX24123=y
# CONFIG_DVB_MT312 is not set
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=y
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=y
CONFIG_DVB_STB6000=y
CONFIG_DVB_STV0299=y
# CONFIG_DVB_STV6110 is not set
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
# CONFIG_DVB_TDA10086 is not set
# CONFIG_DVB_TDA8261 is not set
CONFIG_DVB_VES1X93=m
# CONFIG_DVB_TUNER_ITD1000 is not set
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=y
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=y
CONFIG_DVB_SI21XX=m
# CONFIG_DVB_TS2020 is not set
# CONFIG_DVB_DS3000 is not set
# CONFIG_DVB_MB86A16 is not set
CONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=y
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
CONFIG_DVB_S5H1432=m
CONFIG_DVB_DRXD=y
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not set
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=y
# CONFIG_DVB_ZL10353 is not set
CONFIG_DVB_DIB3000MB=y
CONFIG_DVB_DIB3000MC=y
# CONFIG_DVB_DIB7000M is not set
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_DIB9000=y
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=y
# CONFIG_DVB_STV0367 is not set
# CONFIG_DVB_CXD2820R is not set
CONFIG_DVB_CXD2841ER=y
# CONFIG_DVB_RTL2830 is not set
CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_ZD1301_DEMOD=y
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=y
CONFIG_DVB_TDA10021=m
# CONFIG_DVB_TDA10023 is not set
CONFIG_DVB_STV0297=y
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
# CONFIG_DVB_LGDT3305 is not set
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=y
CONFIG_DVB_AU8522_DTV=y
CONFIG_DVB_AU8522_V4L=y
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
# CONFIG_DVB_MB86A20S is not set
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=y
# CONFIG_DVB_MN88443X is not set
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
# CONFIG_DVB_TUNER_DIB0070 is not set
# CONFIG_DVB_TUNER_DIB0090 is not set
#
# SEC control devices for DVB-S
#
# CONFIG_DVB_DRX39XYJ is not set
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBH29=y
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=y
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=y
CONFIG_DVB_ISL6423=y
# CONFIG_DVB_A8293 is not set
CONFIG_DVB_LGS8GL5=y
CONFIG_DVB_LGS8GXX=y
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
# CONFIG_DVB_IX2505V is not set
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=y
CONFIG_DVB_HORUS3A=y
# CONFIG_DVB_ASCOT2E is not set
CONFIG_DVB_HELENE=y
#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=y
# CONFIG_DVB_SP2 is not set
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
# end of Customise DVB Frontends
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_AMD64=m
# CONFIG_AGP_INTEL is not set
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m
CONFIG_INTEL_GTT=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_CHARDEV=y
CONFIG_DRM_EXPORT_FOR_TESTS=y
CONFIG_DRM_DEBUG_SELFTEST=m
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
# CONFIG_DRM_FBDEV_EMULATION is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_TTM_DMA_PAGE_POOL=y
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_SCHED=m
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
# end of ARM devices
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_USERPTR=y
CONFIG_DRM_AMDGPU=m
CONFIG_DRM_AMDGPU_SI=y
CONFIG_DRM_AMDGPU_CIK=y
CONFIG_DRM_AMDGPU_USERPTR=y
CONFIG_DRM_AMDGPU_GART_DEBUGFS=y
#
# ACP (Audio CoProcessor) Configuration
#
CONFIG_DRM_AMD_ACP=y
# end of ACP (Audio CoProcessor) Configuration
#
# Display Engine Configuration
#
CONFIG_DRM_AMD_DC=y
CONFIG_DRM_AMD_DC_DCN=y
CONFIG_DRM_AMD_DC_HDCP=y
# CONFIG_DEBUG_KERNEL_DC is not set
# end of Display Engine Configuration
# CONFIG_HSA_AMD is not set
CONFIG_DRM_NOUVEAU=m
# CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT is not set
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
# CONFIG_NOUVEAU_DEBUG_MMU is not set
# CONFIG_DRM_NOUVEAU_BACKLIGHT is not set
CONFIG_DRM_I915=m
CONFIG_DRM_I915_FORCE_PROBE=""
# CONFIG_DRM_I915_CAPTURE_ERROR is not set
# CONFIG_DRM_I915_USERPTR is not set
CONFIG_DRM_I915_GVT=y
#
# drm/i915 Debugging
#
# CONFIG_DRM_I915_WERROR is not set
# CONFIG_DRM_I915_DEBUG is not set
CONFIG_DRM_I915_DEBUG_MMIO=y
# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set
CONFIG_DRM_I915_SW_FENCE_CHECK_DAG=y
# CONFIG_DRM_I915_DEBUG_GUC is not set
CONFIG_DRM_I915_SELFTEST=y
# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set
CONFIG_DRM_I915_DEBUG_VBLANK_EVADE=y
CONFIG_DRM_I915_DEBUG_RUNTIME_PM=y
# end of drm/i915 Debugging
#
# drm/i915 Profile Guided Optimisation
#
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
CONFIG_DRM_I915_SPIN_REQUEST=5
CONFIG_DRM_I915_STOP_TIMEOUT=100
CONFIG_DRM_I915_TIMESLICE_DURATION=1
# end of drm/i915 Profile Guided Optimisation
# CONFIG_DRM_VGEM is not set
CONFIG_DRM_VKMS=m
CONFIG_DRM_VMWGFX=m
# CONFIG_DRM_VMWGFX_FBCON is not set
# CONFIG_DRM_GMA500 is not set
CONFIG_DRM_UDL=m
# CONFIG_DRM_AST is not set
CONFIG_DRM_MGAG200=m
# CONFIG_DRM_CIRRUS_QEMU is not set
CONFIG_DRM_QXL=m
CONFIG_DRM_BOCHS=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_PANEL=y
#
# Display Panels
#
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# end of Display Interface Bridges
CONFIG_DRM_ETNAVIV=m
CONFIG_DRM_ETNAVIV_THERMAL=y
CONFIG_DRM_GM12U320=m
CONFIG_DRM_VBOXVIDEO=m
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=m
CONFIG_DRM_LIB_RANDOM=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=m
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=m
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=m
# CONFIG_FB_CYBER2000_DDC is not set
CONFIG_FB_ARC=m
CONFIG_FB_VGA16=m
# CONFIG_FB_N411 is not set
CONFIG_FB_HGA=m
CONFIG_FB_OPENCORES=m
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_I740=m
# CONFIG_FB_LE80578 is not set
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
# CONFIG_FB_MATROX_MYSTIQUE is not set
# CONFIG_FB_MATROX_G is not set
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
CONFIG_FB_RADEON_DEBUG=y
CONFIG_FB_ATY128=m
# CONFIG_FB_ATY128_BACKLIGHT is not set
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_ATY_GX=y
# CONFIG_FB_ATY_BACKLIGHT is not set
CONFIG_FB_S3=m
CONFIG_FB_S3_DDC=y
# CONFIG_FB_SAVAGE is not set
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
# CONFIG_FB_SIS_315 is not set
CONFIG_FB_VIA=m
CONFIG_FB_VIA_DIRECT_PROCFS=y
# CONFIG_FB_VIA_X_COMPATIBILITY is not set
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
# CONFIG_FB_ARK is not set
CONFIG_FB_PM3=m
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_SM501=m
# CONFIG_FB_SMSCUFX is not set
CONFIG_FB_UDL=m
CONFIG_FB_IBM_GXT4500=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=m
# CONFIG_FB_MB862XX is not set
CONFIG_FB_SM712=m
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_LM3533 is not set
CONFIG_BACKLIGHT_PWM=m
# CONFIG_BACKLIGHT_MAX8925 is not set
CONFIG_BACKLIGHT_QCOM_WLED=m
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_WM831X=m
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
CONFIG_BACKLIGHT_88PM860X=m
# CONFIG_BACKLIGHT_PCF50633 is not set
CONFIG_BACKLIGHT_AAT2870=m
CONFIG_BACKLIGHT_LM3630A=m
CONFIG_BACKLIGHT_LM3639=m
# CONFIG_BACKLIGHT_LP855X is not set
CONFIG_BACKLIGHT_GPIO=m
CONFIG_BACKLIGHT_LV5207LP=m
# CONFIG_BACKLIGHT_BD6107 is not set
CONFIG_BACKLIGHT_ARCXCNN=m
# end of Backlight & LCD device support
CONFIG_VGASTATE=m
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# end of Console display driver support
# CONFIG_LOGO is not set
# end of Graphics support
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_OSSEMUL is not set
# CONFIG_SND_PCM_TIMER is not set
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
CONFIG_SND_INDIGOIO=m
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
# CONFIG_SND_ES1968_INPUT is not set
# CONFIG_SND_ES1968_RADIO is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
# CONFIG_SND_INTEL8X0 is not set
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_RECONFIG=y
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=m
# CONFIG_SND_HDA_CODEC_ANALOG is not set
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
# end of HD-Audio
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=0
CONFIG_SND_INTEL_DSP_CONFIG=m
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_UA101 is not set
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
# CONFIG_SND_USB_CAIAQ_INPUT is not set
CONFIG_SND_USB_US122L=m
# CONFIG_SND_USB_6FIRE is not set
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_BCD2000=m
CONFIG_SND_USB_LINE6=m
CONFIG_SND_USB_POD=m
CONFIG_SND_USB_PODHD=m
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
# CONFIG_SND_FIREWIRE is not set
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_AMD_ACP=m
CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=m
CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=m
# CONFIG_SND_SOC_AMD_ACP3x is not set
CONFIG_SND_ATMEL_SOC=m
# CONFIG_SND_DESIGNWARE_I2S is not set
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
CONFIG_SND_SOC_FSL_SAI=m
CONFIG_SND_SOC_FSL_MQS=m
CONFIG_SND_SOC_FSL_AUDMIX=m
CONFIG_SND_SOC_FSL_SSI=m
# CONFIG_SND_SOC_FSL_SPDIF is not set
CONFIG_SND_SOC_FSL_ESAI=m
# CONFIG_SND_SOC_FSL_MICFIL is not set
CONFIG_SND_SOC_IMX_AUDMUX=m
# end of SoC Audio for Freescale CPUs
CONFIG_SND_I2S_HI6210_I2S=m
CONFIG_SND_SOC_IMG=y
CONFIG_SND_SOC_IMG_I2S_IN=m
CONFIG_SND_SOC_IMG_I2S_OUT=m
# CONFIG_SND_SOC_IMG_PARALLEL_OUT is not set
# CONFIG_SND_SOC_IMG_SPDIF_IN is not set
CONFIG_SND_SOC_IMG_SPDIF_OUT=m
CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC=m
# CONFIG_SND_SOC_INTEL_SST_TOPLEVEL is not set
CONFIG_SND_SOC_MTK_BTCVSD=m
# CONFIG_SND_SOC_SOF_TOPLEVEL is not set
#
# STMicroelectronics STM32 SOC audio support
#
# end of STMicroelectronics STM32 SOC audio support
# CONFIG_SND_SOC_XILINX_I2S is not set
CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=m
CONFIG_SND_SOC_XILINX_SPDIF=m
CONFIG_SND_SOC_XTFPGA_I2S=m
# CONFIG_ZX_TDM is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
#
# CODEC drivers
#
CONFIG_SND_SOC_AC97_CODEC=m
CONFIG_SND_SOC_ADAU_UTILS=m
# CONFIG_SND_SOC_ADAU1701 is not set
CONFIG_SND_SOC_ADAU17X1=m
CONFIG_SND_SOC_ADAU1761=m
CONFIG_SND_SOC_ADAU1761_I2C=m
CONFIG_SND_SOC_ADAU7002=m
CONFIG_SND_SOC_ADAU7118=m
CONFIG_SND_SOC_ADAU7118_HW=m
CONFIG_SND_SOC_ADAU7118_I2C=m
CONFIG_SND_SOC_AK4118=m
CONFIG_SND_SOC_AK4458=m
# CONFIG_SND_SOC_AK4554 is not set
# CONFIG_SND_SOC_AK4613 is not set
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_AK5386=m
# CONFIG_SND_SOC_AK5558 is not set
CONFIG_SND_SOC_ALC5623=m
# CONFIG_SND_SOC_BD28623 is not set
CONFIG_SND_SOC_BT_SCO=m
CONFIG_SND_SOC_CROS_EC_CODEC=m
CONFIG_SND_SOC_CS35L32=m
CONFIG_SND_SOC_CS35L33=m
CONFIG_SND_SOC_CS35L34=m
CONFIG_SND_SOC_CS35L35=m
CONFIG_SND_SOC_CS35L36=m
CONFIG_SND_SOC_CS42L42=m
CONFIG_SND_SOC_CS42L51=m
CONFIG_SND_SOC_CS42L51_I2C=m
# CONFIG_SND_SOC_CS42L52 is not set
CONFIG_SND_SOC_CS42L56=m
# CONFIG_SND_SOC_CS42L73 is not set
CONFIG_SND_SOC_CS4265=m
CONFIG_SND_SOC_CS4270=m
CONFIG_SND_SOC_CS4271=m
CONFIG_SND_SOC_CS4271_I2C=m
CONFIG_SND_SOC_CS42XX8=m
CONFIG_SND_SOC_CS42XX8_I2C=m
CONFIG_SND_SOC_CS43130=m
CONFIG_SND_SOC_CS4341=m
CONFIG_SND_SOC_CS4349=m
CONFIG_SND_SOC_CS53L30=m
# CONFIG_SND_SOC_CX2072X is not set
# CONFIG_SND_SOC_DA7213 is not set
CONFIG_SND_SOC_DA7219=m
# CONFIG_SND_SOC_DMIC is not set
CONFIG_SND_SOC_HDMI_CODEC=m
CONFIG_SND_SOC_ES7134=m
CONFIG_SND_SOC_ES7241=m
CONFIG_SND_SOC_ES8316=m
CONFIG_SND_SOC_ES8328=m
CONFIG_SND_SOC_ES8328_I2C=m
CONFIG_SND_SOC_GTM601=m
CONFIG_SND_SOC_INNO_RK3036=m
# CONFIG_SND_SOC_MAX98088 is not set
CONFIG_SND_SOC_MAX98357A=m
CONFIG_SND_SOC_MAX98504=m
CONFIG_SND_SOC_MAX9867=m
CONFIG_SND_SOC_MAX98927=m
CONFIG_SND_SOC_MAX98373=m
# CONFIG_SND_SOC_MAX9860 is not set
# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
CONFIG_SND_SOC_PCM1681=m
CONFIG_SND_SOC_PCM1789=m
CONFIG_SND_SOC_PCM1789_I2C=m
CONFIG_SND_SOC_PCM179X=m
CONFIG_SND_SOC_PCM179X_I2C=m
# CONFIG_SND_SOC_PCM186X_I2C is not set
# CONFIG_SND_SOC_PCM3060_I2C is not set
CONFIG_SND_SOC_PCM3168A=m
CONFIG_SND_SOC_PCM3168A_I2C=m
CONFIG_SND_SOC_PCM512x=m
CONFIG_SND_SOC_PCM512x_I2C=m
# CONFIG_SND_SOC_RK3328 is not set
CONFIG_SND_SOC_RL6231=m
# CONFIG_SND_SOC_RT5616 is not set
# CONFIG_SND_SOC_RT5631 is not set
CONFIG_SND_SOC_RT5645=m
# CONFIG_SND_SOC_SGTL5000 is not set
CONFIG_SND_SOC_SI476X=m
CONFIG_SND_SOC_SIGMADSP=m
CONFIG_SND_SOC_SIGMADSP_REGMAP=m
# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set
# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_SSM2305=m
CONFIG_SND_SOC_SSM2602=m
CONFIG_SND_SOC_SSM2602_I2C=m
CONFIG_SND_SOC_SSM4567=m
# CONFIG_SND_SOC_STA32X is not set
CONFIG_SND_SOC_STA350=m
# CONFIG_SND_SOC_STI_SAS is not set
# CONFIG_SND_SOC_TAS2552 is not set
CONFIG_SND_SOC_TAS2562=m
# CONFIG_SND_SOC_TAS2770 is not set
CONFIG_SND_SOC_TAS5086=m
CONFIG_SND_SOC_TAS571X=m
CONFIG_SND_SOC_TAS5720=m
# CONFIG_SND_SOC_TAS6424 is not set
# CONFIG_SND_SOC_TDA7419 is not set
CONFIG_SND_SOC_TFA9879=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC23_I2C=m
CONFIG_SND_SOC_TLV320AIC31XX=m
CONFIG_SND_SOC_TLV320AIC32X4=m
CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_TLV320ADCX140=m
CONFIG_SND_SOC_TS3A227E=m
# CONFIG_SND_SOC_TSCS42XX is not set
# CONFIG_SND_SOC_TSCS454 is not set
CONFIG_SND_SOC_UDA1334=m
CONFIG_SND_SOC_WCD9335=m
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8523=m
# CONFIG_SND_SOC_WM8524 is not set
CONFIG_SND_SOC_WM8580=m
CONFIG_SND_SOC_WM8711=m
# CONFIG_SND_SOC_WM8728 is not set
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8737=m
# CONFIG_SND_SOC_WM8741 is not set
CONFIG_SND_SOC_WM8750=m
CONFIG_SND_SOC_WM8753=m
# CONFIG_SND_SOC_WM8776 is not set
CONFIG_SND_SOC_WM8782=m
CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SOC_WM8804_I2C=m
# CONFIG_SND_SOC_WM8903 is not set
# CONFIG_SND_SOC_WM8904 is not set
# CONFIG_SND_SOC_WM8960 is not set
CONFIG_SND_SOC_WM8962=m
CONFIG_SND_SOC_WM8974=m
CONFIG_SND_SOC_WM8978=m
CONFIG_SND_SOC_WM8985=m
CONFIG_SND_SOC_ZX_AUD96P22=m
# CONFIG_SND_SOC_MAX9759 is not set
CONFIG_SND_SOC_MT6351=m
CONFIG_SND_SOC_MT6358=m
CONFIG_SND_SOC_MT6660=m
CONFIG_SND_SOC_NAU8540=m
CONFIG_SND_SOC_NAU8810=m
# CONFIG_SND_SOC_NAU8822 is not set
CONFIG_SND_SOC_NAU8824=m
CONFIG_SND_SOC_TPA6130A2=m
# end of CODEC drivers
# CONFIG_SND_SIMPLE_CARD is not set
# CONFIG_SND_X86 is not set
CONFIG_AC97_BUS=m
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACCUTOUCH=m
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=y
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
CONFIG_HID_BIGBEN_FF=m
CONFIG_HID_CHERRY=y
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
CONFIG_HID_PRODIKEYS=m
# CONFIG_HID_CMEDIA is not set
CONFIG_HID_CREATIVE_SB0540=m
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELAN=m
# CONFIG_HID_ELECOM is not set
CONFIG_HID_ELO=m
# CONFIG_HID_EZKEY is not set
CONFIG_HID_GEMBIRD=m
# CONFIG_HID_GFRM is not set
CONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
CONFIG_HID_GOOGLE_HAMMER=m
CONFIG_HID_GT683R=m
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=m
# CONFIG_HID_WALTOP is not set
CONFIG_HID_VIEWSONIC=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=y
# CONFIG_HID_ITE is not set
CONFIG_HID_JABRA=y
CONFIG_HID_TWINHAN=m
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LCPOWER=y
CONFIG_HID_LED=m
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MALTRON=m
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=y
# CONFIG_HID_NTI is not set
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=m
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=m
# CONFIG_HID_PICOLCD_FB is not set
CONFIG_HID_PICOLCD_BACKLIGHT=y
# CONFIG_HID_PICOLCD_LEDS is not set
# CONFIG_HID_PICOLCD_CIR is not set
# CONFIG_HID_PLANTRONICS is not set
CONFIG_HID_PRIMAX=m
CONFIG_HID_RETRODE=m
# CONFIG_HID_ROCCAT is not set
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_SONY_FF=y
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_STEAM=y
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=y
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=m
# CONFIG_HID_THRUSTMASTER is not set
CONFIG_HID_UDRAW_PS3=m
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_HID_SENSOR_HUB=m
# CONFIG_HID_SENSOR_CUSTOM_SENSOR is not set
# CONFIG_HID_ALPS is not set
# end of Special HID drivers
#
# USB HID support
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=y
CONFIG_USB_MOUSE=m
# end of USB HID Boot Protocol drivers
# end of USB HID support
#
# I2C HID support
#
CONFIG_I2C_HID=m
# end of I2C HID support
#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
# end of Intel ISH HID support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
CONFIG_USB_ULPI_BUS=y
CONFIG_USB_CONN_GPIO=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_OTG_WHITELIST=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
# CONFIG_USB_MON is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PLATFORM=m
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_FOTG210_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PCI=m
# CONFIG_USB_OHCI_HCD_SSB is not set
CONFIG_USB_OHCI_HCD_PLATFORM=m
# CONFIG_USB_UHCI_HCD is not set
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_HCD_SSB=m
CONFIG_USB_HCD_TEST_MODE=y
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
CONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_REALTEK=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=y
#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y
CONFIG_USB_CDNS3=m
CONFIG_USB_CDNS3_GADGET=y
CONFIG_USB_CDNS3_HOST=y
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not set
CONFIG_USB_MUSB_GADGET=y
# CONFIG_USB_MUSB_DUAL_ROLE is not set
#
# Platform Glue Layer
#
#
# MUSB DMA mode
#
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_ULPI is not set
# CONFIG_USB_DWC3_HOST is not set
CONFIG_USB_DWC3_GADGET=y
# CONFIG_USB_DWC3_DUAL_ROLE is not set
#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_HAPS=y
CONFIG_USB_DWC2=y
# CONFIG_USB_DWC2_HOST is not set
#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
CONFIG_USB_DWC2_PERIPHERAL=y
# CONFIG_USB_DWC2_DUAL_ROLE is not set
CONFIG_USB_DWC2_PCI=y
# CONFIG_USB_DWC2_DEBUG is not set
CONFIG_USB_DWC2_TRACK_MISSED_SOFS=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_PCI=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_ISP1760=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
# CONFIG_USB_ISP1760_GADGET_ROLE is not set
CONFIG_USB_ISP1760_DUAL_ROLE=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_SEVSEG=m
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=m
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=m
CONFIG_USB_EHSET_TEST_FIXTURE=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_YUREX=y
# CONFIG_USB_EZUSB_FX2 is not set
CONFIG_USB_HUB_USB251XB=m
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
CONFIG_USB_LINK_LAYER_TEST=m
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_TAHVO_USB=m
CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y
CONFIG_USB_ISP1301=y
# end of USB Physical Layer drivers
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
# CONFIG_USB_GADGET_VERBOSE is not set
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
#
# USB Peripheral Controller
#
CONFIG_USB_FOTG210_UDC=m
CONFIG_USB_GR_UDC=y
# CONFIG_USB_R8A66597 is not set
CONFIG_USB_PXA27X=y
# CONFIG_USB_MV_UDC is not set
CONFIG_USB_MV_U3D=y
CONFIG_USB_SNP_CORE=y
CONFIG_USB_M66592=y
CONFIG_USB_BDC_UDC=y
#
# Platform Support
#
CONFIG_USB_BDC_PCI=y
CONFIG_USB_AMD5536UDC=y
CONFIG_USB_NET2272=y
CONFIG_USB_NET2272_DMA=y
CONFIG_USB_NET2280=m
CONFIG_USB_GOKU=y
CONFIG_USB_EG20T=m
CONFIG_USB_DUMMY_HCD=m
# end of USB Peripheral Controller
# CONFIG_USB_CONFIGFS is not set
# CONFIG_TYPEC is not set
CONFIG_USB_ROLE_SWITCH=y
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
# CONFIG_MSPRO_BLOCK is not set
CONFIG_MS_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
# CONFIG_MEMSTICK_JMICRON_38X is not set
CONFIG_MEMSTICK_R592=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
CONFIG_LEDS_CLASS_FLASH=m
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
CONFIG_LEDS_88PM860X=m
CONFIG_LEDS_APU=m
# CONFIG_LEDS_AS3645A is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
CONFIG_LEDS_LM3533=m
CONFIG_LEDS_LM3642=m
# CONFIG_LEDS_LM3601X is not set
# CONFIG_LEDS_MT6323 is not set
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP3952=m
CONFIG_LEDS_LP55XX_COMMON=m
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_LP8501=m
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_PCA955X_GPIO is not set
CONFIG_LEDS_PCA963X=m
CONFIG_LEDS_WM831X_STATUS=m
# CONFIG_LEDS_WM8350 is not set
CONFIG_LEDS_PWM=m
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_BD2802=m
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_TLC591XX=m
CONFIG_LEDS_LM355x=m
# CONFIG_LEDS_MENF21BMC is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
# CONFIG_LEDS_MLXCPLD is not set
CONFIG_LEDS_MLXREG=m
CONFIG_LEDS_USER=m
CONFIG_LEDS_TI_LMU_COMMON=m
# CONFIG_LEDS_LM36274 is not set
# CONFIG_LEDS_TPS6105X is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=y
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
# CONFIG_LEDS_TRIGGER_PANIC is not set
CONFIG_LEDS_TRIGGER_PATTERN=m
CONFIG_LEDS_TRIGGER_AUDIO=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
# CONFIG_RTC_NVMEM is not set
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=y
# CONFIG_RTC_DRV_88PM80X is not set
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=m
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_MAX8907=m
CONFIG_RTC_DRV_MAX8925=m
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=y
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_TPS65910=m
CONFIG_RTC_DRV_TPS80031=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8010=y
# CONFIG_RTC_DRV_RX8581 is not set
CONFIG_RTC_DRV_RX8025=y
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3028=m
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_S5M is not set
CONFIG_RTC_DRV_SD3078=y
#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=y
CONFIG_RTC_DRV_RV3029_HWMON=y
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_VRTC is not set
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1685_FAMILY=m
# CONFIG_RTC_DRV_DS1685 is not set
CONFIG_RTC_DRV_DS1689=y
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
# CONFIG_RTC_DRV_DA9063 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
# CONFIG_RTC_DRV_RP5C01 is not set
CONFIG_RTC_DRV_V3020=m
# CONFIG_RTC_DRV_WM831X is not set
# CONFIG_RTC_DRV_WM8350 is not set
CONFIG_RTC_DRV_PCF50633=m
CONFIG_RTC_DRV_CROS_EC=m
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_FTRTC010=m
CONFIG_RTC_DRV_MT6397=m
#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=m
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_ALTERA_MSGDMA=m
CONFIG_INTEL_IDMA64=y
CONFIG_INTEL_IDXD=y
CONFIG_INTEL_IOATDMA=y
CONFIG_PLX_DMA=y
# CONFIG_QCOM_HIDMA_MGMT is not set
CONFIG_QCOM_HIDMA=m
CONFIG_DW_DMAC_CORE=m
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=m
# CONFIG_SF_PDMA is not set
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options
CONFIG_DCA=y
# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
# CONFIG_UIO_AEC is not set
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
CONFIG_UIO_PRUSS=m
# CONFIG_UIO_MF624 is not set
# CONFIG_VFIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VBOXGUEST=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_INPUT is not set
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
CONFIG_GREYBUS=m
CONFIG_GREYBUS_ES2=m
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_DCDBAS is not set
CONFIG_DELL_SMBIOS=y
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_RBU=m
CONFIG_IBM_RTL=y
CONFIG_SENSORS_HDAPS=y
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_MLX_PLATFORM is not set
#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support
# CONFIG_INTEL_UNCORE_FREQ_CONTROL is not set
# CONFIG_INTEL_MFLD_THERMAL is not set
# CONFIG_INTEL_MID_POWER_BUTTON is not set
CONFIG_INTEL_PMC_CORE=y
CONFIG_INTEL_PUNIT_IPC=y
CONFIG_INTEL_SCU_IPC=y
CONFIG_INTEL_SCU_IPC_UTIL=m
CONFIG_PMC_ATOM=y
CONFIG_MFD_CROS_EC=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_LAPTOP=y
CONFIG_CHROMEOS_PSTORE=m
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=m
CONFIG_CROS_EC_PROTO=y
CONFIG_CROS_EC_CHARDEV=m
CONFIG_CROS_EC_LIGHTBAR=m
CONFIG_CROS_EC_DEBUGFS=m
# CONFIG_CROS_EC_SENSORHUB is not set
CONFIG_CROS_EC_SYSFS=m
# CONFIG_CROS_USBPD_LOGGER is not set
CONFIG_CROS_USBPD_NOTIFY=m
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
CONFIG_COMMON_CLK_WM831X=y
# CONFIG_COMMON_CLK_MAX9485 is not set
CONFIG_COMMON_CLK_SI5341=y
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI544=m
CONFIG_COMMON_CLK_CDCE706=m
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_S2MPS11 is not set
# CONFIG_CLK_TWL6040 is not set
CONFIG_COMMON_CLK_PALMAS=m
# CONFIG_COMMON_CLK_PWM is not set
# end of Common Clock Framework
CONFIG_HWSPINLOCK=y
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
CONFIG_DW_APB_TIMER=y
# end of Clock Source drivers
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=m
CONFIG_RPMSG_VIRTIO=m
# end of Rpmsg drivers
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Aspeed SoC drivers
#
# end of Aspeed SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
CONFIG_XILINX_VCU=m
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
CONFIG_DEVFREQ_GOV_PERFORMANCE=m
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
CONFIG_DEVFREQ_GOV_PASSIVE=m
#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ADC_JACK is not set
# CONFIG_EXTCON_FSA9480 is not set
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_MAX14577=m
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_PALMAS=m
CONFIG_EXTCON_PTN5150=m
CONFIG_EXTCON_RT8973A=m
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=m
# CONFIG_EXTCON_USBC_CROS_EC is not set
CONFIG_MEMORY=y
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=m
CONFIG_IIO_BUFFER_HW_CONSUMER=m
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_CONFIGFS=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=m
# CONFIG_IIO_SW_TRIGGER is not set
#
# Accelerometers
#
# CONFIG_ADXL345_I2C is not set
# CONFIG_ADXL372_I2C is not set
# CONFIG_BMA180 is not set
# CONFIG_BMA400 is not set
CONFIG_BMC150_ACCEL=m
CONFIG_BMC150_ACCEL_I2C=m
CONFIG_DA280=m
CONFIG_DA311=m
# CONFIG_DMARD09 is not set
CONFIG_DMARD10=m
CONFIG_HID_SENSOR_ACCEL_3D=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
CONFIG_KXSD9=m
# CONFIG_KXSD9_I2C is not set
CONFIG_KXCJK1013=m
CONFIG_MC3230=m
# CONFIG_MMA7455_I2C is not set
CONFIG_MMA7660=m
CONFIG_MMA8452=m
CONFIG_MMA9551_CORE=m
CONFIG_MMA9551=m
# CONFIG_MMA9553 is not set
# CONFIG_MXC4005 is not set
# CONFIG_MXC6255 is not set
CONFIG_STK8312=m
CONFIG_STK8BA50=m
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD7091R5=m
CONFIG_AD7291=m
# CONFIG_AD7606_IFACE_PARALLEL is not set
CONFIG_AD799X=m
CONFIG_AXP20X_ADC=m
# CONFIG_AXP288_ADC is not set
# CONFIG_CC10001_ADC is not set
CONFIG_DA9150_GPADC=m
CONFIG_DLN2_ADC=m
# CONFIG_HX711 is not set
CONFIG_LTC2471=m
CONFIG_LTC2485=m
CONFIG_LTC2497=m
CONFIG_MAX1363=m
CONFIG_MAX9611=m
CONFIG_MCP3422=m
CONFIG_MEN_Z188_ADC=m
CONFIG_NAU7802=m
# CONFIG_PALMAS_GPADC is not set
CONFIG_QCOM_VADC_COMMON=m
CONFIG_QCOM_SPMI_IADC=m
CONFIG_QCOM_SPMI_VADC=m
# CONFIG_QCOM_SPMI_ADC5 is not set
# CONFIG_TI_ADC081C is not set
CONFIG_TI_ADS1015=m
CONFIG_VIPERBOARD_ADC=m
CONFIG_XILINX_XADC=m
# end of Analog to digital converters
#
# Analog Front Ends
#
# end of Analog Front Ends
#
# Amplifiers
#
# end of Amplifiers
#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
# CONFIG_BME680 is not set
CONFIG_CCS811=m
# CONFIG_IAQCORE is not set
CONFIG_SENSIRION_SGP30=m
# CONFIG_SPS30 is not set
CONFIG_VZ89X=m
# end of Chemical Sensors
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
# end of Hid Sensor IIO Common
CONFIG_IIO_MS_SENSORS_I2C=m
#
# SSP Sensor Common
#
# end of SSP Sensor Common
CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_CORE=m
#
# Digital to analog converters
#
# CONFIG_AD5064 is not set
CONFIG_AD5380=m
CONFIG_AD5446=m
CONFIG_AD5592R_BASE=m
CONFIG_AD5593R=m
# CONFIG_AD5696_I2C is not set
CONFIG_CIO_DAC=m
CONFIG_DS4424=m
CONFIG_M62332=m
CONFIG_MAX517=m
CONFIG_MCP4725=m
CONFIG_TI_DAC5571=m
# end of Digital to analog converters
#
# IIO dummy driver
#
CONFIG_IIO_DUMMY_EVGEN=m
CONFIG_IIO_SIMPLE_DUMMY=m
CONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set
# end of IIO dummy driver
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
# CONFIG_FXAS21002C is not set
CONFIG_HID_SENSOR_GYRO_3D=m
CONFIG_MPU3050=m
CONFIG_MPU3050_I2C=m
# CONFIG_IIO_ST_GYRO_3AXIS is not set
# CONFIG_ITG3200 is not set
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#
CONFIG_AFE4404=m
# CONFIG_MAX30100 is not set
# CONFIG_MAX30102 is not set
# end of Heart Rate Monitors
# end of Health Sensors
#
# Humidity sensors
#
# CONFIG_AM2315 is not set
CONFIG_DHT11=m
CONFIG_HDC100X=m
CONFIG_HID_SENSOR_HUMIDITY=m
# CONFIG_HTS221 is not set
CONFIG_HTU21=m
CONFIG_SI7005=m
CONFIG_SI7020=m
# end of Humidity sensors
#
# Inertial measurement units
#
CONFIG_BMI160=m
CONFIG_BMI160_I2C=m
# CONFIG_FXOS8700_I2C is not set
# CONFIG_KMX61 is not set
# CONFIG_INV_MPU6050_I2C is not set
CONFIG_IIO_ST_LSM6DSX=m
CONFIG_IIO_ST_LSM6DSX_I2C=m
CONFIG_IIO_ST_LSM6DSX_I3C=m
# end of Inertial measurement units
#
# Light sensors
#
# CONFIG_ADJD_S311 is not set
CONFIG_ADUX1020=m
CONFIG_AL3320A=m
CONFIG_APDS9300=m
CONFIG_APDS9960=m
# CONFIG_BH1750 is not set
CONFIG_BH1780=m
# CONFIG_CM32181 is not set
# CONFIG_CM3232 is not set
# CONFIG_CM3323 is not set
CONFIG_CM36651=m
CONFIG_GP2AP020A00F=m
CONFIG_SENSORS_ISL29018=m
CONFIG_SENSORS_ISL29028=m
# CONFIG_ISL29125 is not set
# CONFIG_HID_SENSOR_ALS is not set
CONFIG_HID_SENSOR_PROX=m
CONFIG_JSA1212=m
CONFIG_RPR0521=m
CONFIG_SENSORS_LM3533=m
CONFIG_LTR501=m
# CONFIG_LV0104CS is not set
CONFIG_MAX44000=m
CONFIG_MAX44009=m
CONFIG_NOA1305=m
# CONFIG_OPT3001 is not set
CONFIG_PA12203001=m
CONFIG_SI1133=m
CONFIG_SI1145=m
CONFIG_STK3310=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_I2C=m
CONFIG_TCS3414=m
# CONFIG_TCS3472 is not set
CONFIG_SENSORS_TSL2563=m
CONFIG_TSL2583=m
CONFIG_TSL2772=m
# CONFIG_TSL4531 is not set
CONFIG_US5182D=m
# CONFIG_VCNL4000 is not set
CONFIG_VCNL4035=m
CONFIG_VEML6030=m
# CONFIG_VEML6070 is not set
CONFIG_VL6180=m
# CONFIG_ZOPT2201 is not set
# end of Light sensors
#
# Magnetometer sensors
#
CONFIG_AK8975=m
CONFIG_AK09911=m
# CONFIG_BMC150_MAGN_I2C is not set
# CONFIG_MAG3110 is not set
CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
# CONFIG_MMC35240 is not set
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
CONFIG_SENSORS_HMC5843=m
CONFIG_SENSORS_HMC5843_I2C=m
CONFIG_SENSORS_RM3100=m
CONFIG_SENSORS_RM3100_I2C=m
# end of Magnetometer sensors
#
# Multiplexers
#
# end of Multiplexers
#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=m
CONFIG_HID_SENSOR_DEVICE_ROTATION=m
# end of Inclinometer sensors
#
# Triggers - standalone
#
CONFIG_IIO_INTERRUPT_TRIGGER=m
CONFIG_IIO_SYSFS_TRIGGER=m
# end of Triggers - standalone
#
# Digital potentiometers
#
CONFIG_AD5272=m
CONFIG_DS1803=m
# CONFIG_MAX5432 is not set
# CONFIG_MCP4018 is not set
# CONFIG_MCP4531 is not set
CONFIG_TPL0102=m
# end of Digital potentiometers
#
# Digital potentiostats
#
CONFIG_LMP91000=m
# end of Digital potentiostats
#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
# CONFIG_BMP280 is not set
CONFIG_DLHL60D=m
CONFIG_DPS310=m
# CONFIG_HID_SENSOR_PRESS is not set
# CONFIG_HP03 is not set
CONFIG_MPL115=m
CONFIG_MPL115_I2C=m
# CONFIG_MPL3115 is not set
CONFIG_MS5611=m
# CONFIG_MS5611_I2C is not set
CONFIG_MS5637=m
# CONFIG_IIO_ST_PRESS is not set
CONFIG_T5403=m
CONFIG_HP206C=m
CONFIG_ZPA2326=m
CONFIG_ZPA2326_I2C=m
# end of Pressure sensors
#
# Lightning sensors
#
# end of Lightning sensors
#
# Proximity and distance sensors
#
# CONFIG_ISL29501 is not set
# CONFIG_LIDAR_LITE_V2 is not set
CONFIG_MB1232=m
# CONFIG_PING is not set
# CONFIG_RFD77402 is not set
# CONFIG_SRF04 is not set
CONFIG_SX9500=m
CONFIG_SRF08=m
CONFIG_VL53L0X_I2C=m
# end of Proximity and distance sensors
#
# Resolver to digital converters
#
# end of Resolver to digital converters
#
# Temperature sensors
#
CONFIG_HID_SENSOR_TEMP=m
CONFIG_MLX90614=m
CONFIG_MLX90632=m
# CONFIG_TMP006 is not set
CONFIG_TMP007=m
CONFIG_TSYS01=m
CONFIG_TSYS02D=m
# end of Temperature sensors
# CONFIG_NTB is not set
CONFIG_VME_BUS=y
#
# VME Bridge Drivers
#
CONFIG_VME_CA91CX42=m
# CONFIG_VME_TSI148 is not set
CONFIG_VME_FAKE=y
#
# VME Board Drivers
#
# CONFIG_VMIVME_7805 is not set
#
# VME Device Drivers
#
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_CROS_EC is not set
# CONFIG_PWM_LP3943 is not set
# CONFIG_PWM_LPSS_PCI is not set
CONFIG_PWM_PCA9685=m
#
# IRQ chip support
#
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_BRCMSTB_RESCAL is not set
# CONFIG_RESET_TI_SYSCON is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_PHY_PXA_28NM_HSIC=m
CONFIG_PHY_PXA_28NM_USB2=y
CONFIG_PHY_CPCAP_USB=m
CONFIG_PHY_QCOM_USB_HS=m
CONFIG_PHY_QCOM_USB_HSIC=m
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_TUSB1210 is not set
CONFIG_PHY_INTEL_EMMC=m
# end of PHY Subsystem
CONFIG_POWERCAP=y
# CONFIG_INTEL_RAPL is not set
# CONFIG_IDLE_INJECT is not set
CONFIG_MCB=m
# CONFIG_MCB_PCI is not set
CONFIG_MCB_LPC=m
#
# Performance monitor support
#
# end of Performance monitor support
# CONFIG_RAS is not set
CONFIG_USB4=m
#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android
CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_SPMI_SDAM=m
#
# HW tracing support
#
CONFIG_STM=m
# CONFIG_STM_PROTO_BASIC is not set
# CONFIG_STM_PROTO_SYS_T is not set
CONFIG_STM_DUMMY=m
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=m
# CONFIG_INTEL_TH is not set
# end of HW tracing support
# CONFIG_FPGA is not set
CONFIG_TEE=y
#
# TEE drivers
#
# end of TEE drivers
CONFIG_PM_OPP=y
CONFIG_SIOX=y
CONFIG_SIOX_BUS_GPIO=y
CONFIG_SLIMBUS=m
CONFIG_SLIM_QCOM_CTRL=m
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_ONLINE_SCRUB is not set
CONFIG_XFS_WARN=y
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=m
# CONFIG_BTRFS_FS_POSIX_ACL is not set
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
CONFIG_BTRFS_FS_REF_VERIFY=y
CONFIG_NILFS2_FS=m
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
# CONFIG_F2FS_CHECK_FS is not set
CONFIG_F2FS_FAULT_INJECTION=y
CONFIG_F2FS_FS_COMPRESSION=y
# CONFIG_F2FS_FS_LZO is not set
CONFIG_F2FS_FS_LZ4=y
CONFIG_ZONEFS_FS=y
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
# CONFIG_MANDATORY_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FS_VERITY=y
# CONFIG_FS_VERITY_DEBUG is not set
# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_OVERLAY_FS=m
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
CONFIG_OVERLAY_FS_INDEX=y
# CONFIG_OVERLAY_FS_NFS_EXPORT is not set
CONFIG_OVERLAY_FS_XINO_AUTO=y
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_CACHEFILES=m
CONFIG_CACHEFILES_DEBUG=y
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
# end of DOS/FAT/NT Filesystems
#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=y
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=y
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
CONFIG_SQUASHFS_XATTR=y
# CONFIG_SQUASHFS_ZLIB is not set
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
# CONFIG_SQUASHFS_XZ is not set
CONFIG_SQUASHFS_ZSTD=y
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
# CONFIG_MINIX_FS is not set
CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_QNX6FS_FS=m
CONFIG_QNX6FS_DEBUG=y
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
CONFIG_EROFS_FS=y
CONFIG_EROFS_FS_DEBUG=y
# CONFIG_EROFS_FS_XATTR is not set
CONFIG_EROFS_FS_ZIP=y
CONFIG_EROFS_FS_CLUSTER_PAGE_LIMIT=1
CONFIG_VBOXSF_FS=m
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=m
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_MAC_ROMAN=m
# CONFIG_NLS_MAC_CELTIC is not set
CONFIG_NLS_MAC_CENTEURO=m
# CONFIG_NLS_MAC_CROATIAN is not set
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
# CONFIG_NLS_MAC_INUIT is not set
CONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
CONFIG_UNICODE=y
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_BIG_KEYS is not set
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_KEY_NOTIFICATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITYFS is not set
# CONFIG_PAGE_TABLE_ISOLATION is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY_FALLBACK is not set
# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
# end of Memory initialization
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_DH=m
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_CURVE25519=m
CONFIG_CRYPTO_CURVE25519_X86=y
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_AEGIS128=m
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_NHPOLY1305=y
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
CONFIG_CRYPTO_NHPOLY1305_AVX2=y
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_ESSIV is not set
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_CRC32=m
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_XXHASH=m
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_BLAKE2S=y
CONFIG_CRYPTO_BLAKE2S_X86=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_POLY1305_X86_64=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=m
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
# CONFIG_CRYPTO_SM3 is not set
CONFIG_CRYPTO_STREEBOG=y
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST5_AVX_X86_64=y
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_DES3_EDE_X86_64=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_CHACHA20=y
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=y
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
CONFIG_CRYPTO_LZ4=y
# CONFIG_CRYPTO_LZ4HC is not set
CONFIG_CRYPTO_ZSTD=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_HASH_INFO=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_BLAKE2S=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=y
CONFIG_CRYPTO_DEV_PADLOCK_SHA=y
CONFIG_CRYPTO_DEV_ATMEL_I2C=y
CONFIG_CRYPTO_DEV_ATMEL_ECC=y
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
# CONFIG_CRYPTO_DEV_CCP is not set
CONFIG_CRYPTO_DEV_QAT=m
CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_VIRTIO is not set
CONFIG_CRYPTO_DEV_SAFEXCEL=m
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
# CONFIG_RAID6_PQ_BENCHMARK is not set
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CORDIC=m
CONFIG_PRIME_NUMBERS=m
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=m
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=m
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC16=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
CONFIG_DMA_CMA=y
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_PERCENTAGE=0
# CONFIG_CMA_SIZE_SEL_MBYTES is not set
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
CONFIG_CMA_SIZE_SEL_MIN=y
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_DMA_API_DEBUG=y
# CONFIG_DMA_API_DEBUG_SG is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
CONFIG_STRING_SELFTEST=m
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_PRINTK_CALLER is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_DEBUG_SYNCHRO_TEST=y
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
# CONFIG_SYMBOLIC_ERRNAME is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# end of printk and dmesg options
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
CONFIG_HEADERS_INSTALL=y
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_STACK_VALIDATION=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
# CONFIG_MAGIC_SYSRQ_SERIAL is not set
CONFIG_DEBUG_FS=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=m
CONFIG_KGDB_TESTS=y
CONFIG_KGDB_TESTS_ON_BOOT=y
CONFIG_KGDB_TESTS_BOOT_STRING="V1F100"
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x1
# CONFIG_KDB_KEYBOARD is not set
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
CONFIG_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN_NO_ALIGNMENT is not set
CONFIG_UBSAN_ALIGNMENT=y
# CONFIG_TEST_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
# CONFIG_PAGE_OWNER is not set
CONFIG_PAGE_POISONING=y
# CONFIG_PAGE_POISONING_NO_SANITY is not set
# CONFIG_PAGE_POISONING_ZERO is not set
CONFIG_DEBUG_PAGE_REF=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
CONFIG_PTDUMP_DEBUGFS=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_DEBUG_SLAB is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
CONFIG_DEBUG_VM_RB=y
# CONFIG_DEBUG_VM_PGFLAGS is not set
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
# CONFIG_KASAN is not set
CONFIG_KASAN_STACK=1
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_WQ_WATCHDOG=y
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
# CONFIG_WW_MUTEX_SELFTEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
CONFIG_DEBUG_KOBJECT=y
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_LIST=y
CONFIG_TORTURE_TEST=m
# CONFIG_RCU_PERF_TEST is not set
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
CONFIG_DEBUG_BLOCK_EXT_DEVT=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_SAMPLES=y
CONFIG_SAMPLE_TRACE_EVENTS=m
CONFIG_SAMPLE_TRACE_PRINTK=m
CONFIG_SAMPLE_TRACE_ARRAY=m
CONFIG_SAMPLE_KOBJECT=y
CONFIG_SAMPLE_HW_BREAKPOINT=m
CONFIG_SAMPLE_KFIFO=m
# CONFIG_SAMPLE_KDB is not set
CONFIG_SAMPLE_RPMSG_CLIENT=m
# CONFIG_SAMPLE_CONFIGFS is not set
CONFIG_SAMPLE_HIDRAW=y
# CONFIG_SAMPLE_PIDFD is not set
CONFIG_SAMPLE_VFIO_MDEV_MDPY_FB=m
CONFIG_SAMPLE_VFS=y
CONFIG_SAMPLE_INTEL_MEI=y
CONFIG_SAMPLE_WATCH_QUEUE=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
#
# x86 Debugging
#
# CONFIG_DEBUG_AID_FOR_SYZBOT is not set
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_EARLY_PRINTK_USB_XDBC=y
CONFIG_DEBUG_WX=y
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
CONFIG_IO_DELAY_UDELAY=y
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_DEBUG_ENTRY=y
CONFIG_DEBUG_NMI_SELFTEST=y
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAIL_MAKE_REQUEST is not set
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_KCOV=y
CONFIG_KCOV_INSTRUMENT_ALL=y
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=y
CONFIG_TEST_LIST_SORT=y
# CONFIG_TEST_SORT is not set
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_RBTREE_TEST=y
CONFIG_REED_SOLOMON_TEST=m
# CONFIG_INTERVAL_TREE_TEST is not set
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=m
CONFIG_TEST_HEXDUMP=m
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_STRSCPY=m
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
CONFIG_TEST_BITMAP=m
# CONFIG_TEST_BITFIELD is not set
# CONFIG_TEST_UUID is not set
CONFIG_TEST_XARRAY=m
CONFIG_TEST_OVERFLOW=y
# CONFIG_TEST_RHASHTABLE is not set
CONFIG_TEST_HASH=y
# CONFIG_TEST_IDA is not set
CONFIG_TEST_LKM=m
CONFIG_TEST_VMALLOC=m
CONFIG_TEST_USER_COPY=m
CONFIG_FIND_BIT_BENCHMARK=y
CONFIG_TEST_FIRMWARE=y
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
CONFIG_TEST_DEBUG_VIRTUAL=y
CONFIG_TEST_MEMCAT_P=y
CONFIG_TEST_STACKINIT=m
# CONFIG_TEST_MEMINIT is not set
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
# end of Kernel hacking
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: mmotm 2020-02-24-19-53 uploaded (objtool warning)
2020-02-25 17:01 ` mmotm 2020-02-24-19-53 uploaded (objtool warning) Randy Dunlap
@ 2020-02-27 21:52 ` Josh Poimboeuf
0 siblings, 0 replies; 95+ messages in thread
From: Josh Poimboeuf @ 2020-02-27 21:52 UTC (permalink / raw)
To: Randy Dunlap
Cc: Andrew Morton, broonie, linux-fsdevel, linux-kernel, linux-mm,
linux-next, mhocko, mm-commits, sfr, Peter Zijlstra
On Tue, Feb 25, 2020 at 09:01:54AM -0800, Randy Dunlap wrote:
> On 2/24/20 7:53 PM, Andrew Morton wrote:
> > The mm-of-the-moment snapshot 2020-02-24-19-53 has been uploaded to
> >
> > http://www.ozlabs.org/~akpm/mmotm/
> >
> > mmotm-readme.txt says
> >
> > README for mm-of-the-moment:
> >
> > http://www.ozlabs.org/~akpm/mmotm/
> >
> > This is a snapshot of my -mm patch queue. Uploaded at random hopefully
> > more than once a week.
> >
>
> Still seeing this one:
>
> on x86_64:
>
> drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: i915_gem_execbuffer2_ioctl()+0x5b7: call to gen8_canonical_addr() with UACCESS enabled
Forgot I had a patch for this. Posting shortly.
--
Josh
^ permalink raw reply [flat|nested] 95+ messages in thread