linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: David Hildenbrand <david@redhat.com>
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org,
	virtualization@lists.linux-foundation.org,
	Tyler Sanderson <tysand@google.com>,
	Wei Wang <wei.w.wang@intel.com>,
	Alexander Duyck <alexander.h.duyck@linux.intel.com>,
	David Rientjes <rientjes@google.com>,
	Nadav Amit <namit@vmware.com>, Michal Hocko <mhocko@kernel.org>
Subject: Re: [PATCH v1 3/3] virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM
Date: Thu, 6 Feb 2020 04:12:11 -0500	[thread overview]
Message-ID: <20200206041126-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <20200205163402.42627-4-david@redhat.com>

On Wed, Feb 05, 2020 at 05:34:02PM +0100, David Hildenbrand wrote:
> Commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker")
> changed the behavior when deflation happens automatically. Instead of
> deflating when called by the OOM handler, the shrinker is used.
> 
> However, the balloon is not simply some slab cache that should be
> shrunk when under memory pressure. The shrinker does not have a concept of
> priorities, so this behavior cannot be configured.
> 
> There was a report that this results in undesired side effects when
> inflating the balloon to shrink the page cache. [1]
> 	"When inflating the balloon against page cache (i.e. no free memory
> 	 remains) vmscan.c will both shrink page cache, but also invoke the
> 	 shrinkers -- including the balloon's shrinker. So the balloon
> 	 driver allocates memory which requires reclaim, vmscan gets this
> 	 memory by shrinking the balloon, and then the driver adds the
> 	 memory back to the balloon. Basically a busy no-op."
> 
> The name "deflate on OOM" makes it pretty clear when deflation should
> happen - after other approaches to reclaim memory failed, not while
> reclaiming. This allows to minimize the footprint of a guest - memory
> will only be taken out of the balloon when really needed.
> 
> Especially, a drop_slab() will result in the whole balloon getting
> deflated - undesired. While handling it via the OOM handler might not be
> perfect, it keeps existing behavior. If we want a different behavior, then
> we need a new feature bit and document it properly (although, there should
> be a clear use case and the intended effects should be well described).
> 
> Keep using the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT, because
> this has no such side effects. Always register the shrinker with
> VIRTIO_BALLOON_F_FREE_PAGE_HINT now. We are always allowed to reuse free
> pages that are still to be processed by the guest. The hypervisor takes
> care of identifying and resolving possible races between processing a
> hinting request and the guest reusing a page.
> 
> In contrast to pre commit 71994620bb25 ("virtio_balloon: replace oom
> notifier with shrinker"), don't add a moodule parameter to configure the
> number of pages to deflate on OOM. Can be re-added if really needed.
> Also, pay attention that leak_balloon() returns the number of 4k pages -
> convert it properly in virtio_balloon_oom_notify().
> 
> Note1: using the OOM handler is frowned upon, but it really is what we
>        need for this feature.
> 
> Note2: without VIRTIO_BALLOON_F_MUST_TELL_HOST (iow, always with QEMU) we
>        could actually skip sending deflation requests to our hypervisor,
>        making the OOM path *very* simple. Besically freeing pages and
>        updating the balloon. If the communication with the host ever
>        becomes a problem on this call path.
> 
> [1] https://www.spinics.net/lists/linux-virtualization/msg40863.html
> 
> Reported-by: Tyler Sanderson <tysand@google.com>
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Cc: Wei Wang <wei.w.wang@intel.com>
> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
> Cc: David Rientjes <rientjes@google.com>
> Cc: Nadav Amit <namit@vmware.com>
> Cc: Michal Hocko <mhocko@kernel.org>
> Signed-off-by: David Hildenbrand <david@redhat.com>


I guess we should add a Fixes tag to the patch it's reverting,
this way it's backported and hypervisors will be able to rely on OOM
behaviour.

> ---
>  drivers/virtio/virtio_balloon.c | 107 +++++++++++++-------------------
>  1 file changed, 44 insertions(+), 63 deletions(-)
> 
> diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
> index 7e5d84caeb94..e7b18f556c5e 100644
> --- a/drivers/virtio/virtio_balloon.c
> +++ b/drivers/virtio/virtio_balloon.c
> @@ -14,6 +14,7 @@
>  #include <linux/slab.h>
>  #include <linux/module.h>
>  #include <linux/balloon_compaction.h>
> +#include <linux/oom.h>
>  #include <linux/wait.h>
>  #include <linux/mm.h>
>  #include <linux/mount.h>
> @@ -27,7 +28,9 @@
>   */
>  #define VIRTIO_BALLOON_PAGES_PER_PAGE (unsigned)(PAGE_SIZE >> VIRTIO_BALLOON_PFN_SHIFT)
>  #define VIRTIO_BALLOON_ARRAY_PFNS_MAX 256
> -#define VIRTBALLOON_OOM_NOTIFY_PRIORITY 80
> +/* Maximum number of (4k) pages to deflate on OOM notifications. */
> +#define VIRTIO_BALLOON_OOM_NR_PAGES 256
> +#define VIRTIO_BALLOON_OOM_NOTIFY_PRIORITY 80
>  
>  #define VIRTIO_BALLOON_FREE_PAGE_ALLOC_FLAG (__GFP_NORETRY | __GFP_NOWARN | \
>  					     __GFP_NOMEMALLOC)
> @@ -112,8 +115,11 @@ struct virtio_balloon {
>  	/* Memory statistics */
>  	struct virtio_balloon_stat stats[VIRTIO_BALLOON_S_NR];
>  
> -	/* To register a shrinker to shrink memory upon memory pressure */
> +	/* Shrinker to return free pages - VIRTIO_BALLOON_F_FREE_PAGE_HINT */
>  	struct shrinker shrinker;
> +
> +	/* OOM notifier to deflate on OOM - VIRTIO_BALLOON_F_DEFLATE_ON_OOM */
> +	struct notifier_block oom_nb;
>  };
>  
>  static struct virtio_device_id id_table[] = {
> @@ -786,50 +792,13 @@ static unsigned long shrink_free_pages(struct virtio_balloon *vb,
>  	return blocks_freed * VIRTIO_BALLOON_HINT_BLOCK_PAGES;
>  }
>  
> -static unsigned long leak_balloon_pages(struct virtio_balloon *vb,
> -                                          unsigned long pages_to_free)
> -{
> -	return leak_balloon(vb, pages_to_free * VIRTIO_BALLOON_PAGES_PER_PAGE) /
> -		VIRTIO_BALLOON_PAGES_PER_PAGE;
> -}
> -
> -static unsigned long shrink_balloon_pages(struct virtio_balloon *vb,
> -					  unsigned long pages_to_free)
> -{
> -	unsigned long pages_freed = 0;
> -
> -	/*
> -	 * One invocation of leak_balloon can deflate at most
> -	 * VIRTIO_BALLOON_ARRAY_PFNS_MAX balloon pages, so we call it
> -	 * multiple times to deflate pages till reaching pages_to_free.
> -	 */
> -	while (vb->num_pages && pages_freed < pages_to_free)
> -		pages_freed += leak_balloon_pages(vb,
> -						  pages_to_free - pages_freed);
> -
> -	update_balloon_size(vb);
> -
> -	return pages_freed;
> -}
> -
>  static unsigned long virtio_balloon_shrinker_scan(struct shrinker *shrinker,
>  						  struct shrink_control *sc)
>  {
> -	unsigned long pages_to_free, pages_freed = 0;
>  	struct virtio_balloon *vb = container_of(shrinker,
>  					struct virtio_balloon, shrinker);
>  
> -	pages_to_free = sc->nr_to_scan;
> -
> -	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT))
> -		pages_freed = shrink_free_pages(vb, pages_to_free);
> -
> -	if (pages_freed >= pages_to_free)
> -		return pages_freed;
> -
> -	pages_freed += shrink_balloon_pages(vb, pages_to_free - pages_freed);
> -
> -	return pages_freed;
> +	return shrink_free_pages(vb, sc->nr_to_scan);
>  }
>  
>  static unsigned long virtio_balloon_shrinker_count(struct shrinker *shrinker,
> @@ -837,26 +806,22 @@ static unsigned long virtio_balloon_shrinker_count(struct shrinker *shrinker,
>  {
>  	struct virtio_balloon *vb = container_of(shrinker,
>  					struct virtio_balloon, shrinker);
> -	unsigned long count;
> -
> -	count = vb->num_pages / VIRTIO_BALLOON_PAGES_PER_PAGE;
> -	count += vb->num_free_page_blocks * VIRTIO_BALLOON_HINT_BLOCK_PAGES;
>  
> -	return count;
> +	return vb->num_free_page_blocks * VIRTIO_BALLOON_HINT_BLOCK_PAGES;
>  }
>  
> -static void virtio_balloon_unregister_shrinker(struct virtio_balloon *vb)
> +static int virtio_balloon_oom_notify(struct notifier_block *nb,
> +				     unsigned long dummy, void *parm)
>  {
> -	unregister_shrinker(&vb->shrinker);
> -}
> +	struct virtio_balloon *vb = container_of(nb,
> +						 struct virtio_balloon, oom_nb);
> +	unsigned long *freed = parm;
>  
> -static int virtio_balloon_register_shrinker(struct virtio_balloon *vb)
> -{
> -	vb->shrinker.scan_objects = virtio_balloon_shrinker_scan;
> -	vb->shrinker.count_objects = virtio_balloon_shrinker_count;
> -	vb->shrinker.seeks = DEFAULT_SEEKS;
> +	*freed += leak_balloon(vb, VIRTIO_BALLOON_OOM_NR_PAGES) /
> +		  VIRTIO_BALLOON_PAGES_PER_PAGE;
> +	update_balloon_size(vb);
>  
> -	return register_shrinker(&vb->shrinker);
> +	return NOTIFY_OK;
>  }
>  
>  static int virtballoon_probe(struct virtio_device *vdev)
> @@ -933,22 +898,35 @@ static int virtballoon_probe(struct virtio_device *vdev)
>  			virtio_cwrite(vb->vdev, struct virtio_balloon_config,
>  				      poison_val, &poison_val);
>  		}
> -	}
> -	/*
> -	 * We continue to use VIRTIO_BALLOON_F_DEFLATE_ON_OOM to decide if a
> -	 * shrinker needs to be registered to relieve memory pressure.
> -	 */
> -	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_DEFLATE_ON_OOM)) {
> -		err = virtio_balloon_register_shrinker(vb);
> +
> +		/*
> +		 * We're allowed to reuse any free pages, even if they are
> +		 * still to be processed by the host.
> +		 */
> +		vb->shrinker.scan_objects = virtio_balloon_shrinker_scan;
> +		vb->shrinker.count_objects = virtio_balloon_shrinker_count;
> +		vb->shrinker.seeks = DEFAULT_SEEKS;
> +		err = register_shrinker(&vb->shrinker);
>  		if (err)
>  			goto out_del_balloon_wq;
>  	}
> +	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_DEFLATE_ON_OOM)) {
> +		vb->oom_nb.notifier_call = virtio_balloon_oom_notify;
> +		vb->oom_nb.priority = VIRTIO_BALLOON_OOM_NOTIFY_PRIORITY;
> +		err = register_oom_notifier(&vb->oom_nb);
> +		if (err < 0)
> +			goto out_unregister_shrinker;
> +	}
> +
>  	virtio_device_ready(vdev);
>  
>  	if (towards_target(vb))
>  		virtballoon_changed(vdev);
>  	return 0;
>  
> +out_unregister_shrinker:
> +	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT))
> +		unregister_shrinker(&vb->shrinker);
>  out_del_balloon_wq:
>  	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT))
>  		destroy_workqueue(vb->balloon_wq);
> @@ -987,8 +965,11 @@ static void virtballoon_remove(struct virtio_device *vdev)
>  {
>  	struct virtio_balloon *vb = vdev->priv;
>  
> -	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_DEFLATE_ON_OOM))
> -		virtio_balloon_unregister_shrinker(vb);
> +	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_DEFLATE_ON_OOM))
> +		unregister_oom_notifier(&vb->oom_nb);
> +	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT))
> +		unregister_shrinker(&vb->shrinker);
> +
>  	spin_lock_irq(&vb->stop_update_lock);
>  	vb->stop_update = true;
>  	spin_unlock_irq(&vb->stop_update_lock);
> -- 
> 2.24.1



  parent reply	other threads:[~2020-02-06  9:12 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-05 16:33 [PATCH v1 0/3] virtio-balloon: Fixes + switch back to OOM handler David Hildenbrand
2020-02-05 16:34 ` [PATCH v1 1/3] virtio-balloon: Fix memory leak when unloading while hinting is in progress David Hildenbrand
2020-02-06  8:36   ` Michael S. Tsirkin
2020-02-05 16:34 ` [PATCH v1 2/3] virtio_balloon: Fix memory leaks on errors in virtballoon_probe() David Hildenbrand
2020-02-06  8:36   ` Michael S. Tsirkin
2020-02-05 16:34 ` [PATCH v1 3/3] virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM David Hildenbrand
2020-02-05 22:37   ` Tyler Sanderson
2020-02-05 22:52     ` David Hildenbrand
2020-02-05 23:06       ` Tyler Sanderson
2020-02-06  7:40   ` Michael S. Tsirkin
2020-02-06  8:42     ` David Hildenbrand
2020-02-06  8:57       ` Michael S. Tsirkin
2020-02-06  9:05         ` David Hildenbrand
2020-02-06  9:09           ` Michael S. Tsirkin
2020-02-06  8:57   ` Wang, Wei W
2020-02-06  9:11   ` Michael S. Tsirkin
2020-02-06  9:12   ` Michael S. Tsirkin [this message]
2020-02-06  9:21     ` David Hildenbrand
2020-02-14  9:51   ` David Hildenbrand
2020-02-14 13:31     ` Wang, Wei W
2020-02-16  9:47     ` Michael S. Tsirkin
2020-02-21  3:29       ` Tyler Sanderson
2020-03-08  4:47         ` Tyler Sanderson
2020-03-09  9:03           ` David Hildenbrand
2020-03-09 10:14             ` Michael S. Tsirkin
2020-03-09 10:59               ` David Hildenbrand
2020-03-09 10:24           ` Michael S. Tsirkin
2020-02-14 14:06   ` Michal Hocko
2020-02-14 14:18     ` David Hildenbrand
2020-02-14 20:48       ` Tyler Sanderson
2020-02-14 21:17         ` David Hildenbrand
2020-02-16  9:46         ` Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200206041126-mutt-send-email-mst@kernel.org \
    --to=mst@redhat.com \
    --cc=alexander.h.duyck@linux.intel.com \
    --cc=david@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@kernel.org \
    --cc=namit@vmware.com \
    --cc=rientjes@google.com \
    --cc=tysand@google.com \
    --cc=virtualization@lists.linux-foundation.org \
    --cc=wei.w.wang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).