From: SeongJae Park <email@example.com>
Cc: SeongJae Park <firstname.lastname@example.org>, <Jonathan.Cameron@Huawei.com>,
<email@example.com>, <firstname.lastname@example.org>, <email@example.com>,
<firstname.lastname@example.org>, <email@example.com>, <firstname.lastname@example.org>,
<email@example.com>, <firstname.lastname@example.org>, <email@example.com>,
<firstname.lastname@example.org>, <email@example.com>, <firstname.lastname@example.org>,
<email@example.com>, <firstname.lastname@example.org>, <email@example.com>,
<firstname.lastname@example.org>, <email@example.com>, <firstname.lastname@example.org>,
<email@example.com>, <firstname.lastname@example.org>, <email@example.com>,
Subject: [RFC v12 8/8] Documentation/admin-guide/mm: Document DAMON-based operation schemes
Date: Tue, 16 Jun 2020 09:38:28 +0200 [thread overview]
Message-ID: <firstname.lastname@example.org> (raw)
From: SeongJae Park <email@example.com>
This commit documents DAMON-based operation schemes in the DAMON
Signed-off-by: SeongJae Park <firstname.lastname@example.org>
Documentation/admin-guide/mm/damon/guide.rst | 35 +++++
Documentation/admin-guide/mm/damon/plans.rst | 23 +---
Documentation/admin-guide/mm/damon/usage.rst | 127 +++++++++++++++++--
3 files changed, 153 insertions(+), 32 deletions(-)
diff --git a/Documentation/admin-guide/mm/damon/guide.rst b/Documentation/admin-guide/mm/damon/guide.rst
index 4a840d1b02d4..c10f65ce721c 100644
@@ -55,6 +55,11 @@ heats``. If it shows a simple pattern consists of a small number of memory
regions having high contrast of access temperature, you could consider `Manual
+If the access pattern is very frequently changing so that you cannot figure out
+what is the performance important region using your human eye, `Automated
+DAMON-based Memory Operations`_ might help the case owing to its machine-level
You don't need to take only one approach among the above plans, but you could
use multiple of the above approaches to maximize the benefit. If you still
want to absorb more benefits, you should develop `Personalized DAMON
@@ -158,6 +163,36 @@ object is the hot object.
The chronological changes of working set size.
+Automated DAMON-based Memory Operations
+Though `Manual Program Optimization` works well in many cases and DAMON can
+help it, modifying the source code is not a good option in many cases. First
+of all, the source code could be too old or unavailable. And, many workloads
+will have complex data access patterns that even hard to distinguish hot memory
+objects and cold memory objects with the human eye. Finding the mapping from
+the visualized access pattern to the source code and injecting the hinting
+system calls inside the code will also be quite challenging.
+By using DAMON-based operation schemes (DAMOS) via ``damo schemes``, you will
+be able to easily optimize your workload in such a case. Our example schemes
+called 'efficient THP' and 'proactive reclamation' achieved significant speedup
+and memory space saves against 25 realistic workloads _, _.
+That said, note that you need careful tune of the schemes (e.g., target region
+size and age) and monitoring attributes for the successful use of this
+approach. Because the optimal values of the parameters will be dependent on
+each system and workload, misconfiguring the parameters could result in worse
+For the tuning, you could measure the performance metrics such as IPC, TLB
+misses, and swap in/out events and adjusts the parameters based on their
+changes. The total number and the total size of the regions that each scheme
+is applied, which are provided via the debugfs interface and the programming
+interface can also be useful. Writing a program automating this optimal
+parameter could be an option.
Personalized DAMON Application
diff --git a/Documentation/admin-guide/mm/damon/plans.rst b/Documentation/admin-guide/mm/damon/plans.rst
index e0ad178a01d1..765344f02eb3 100644
@@ -4,25 +4,4 @@
-DAMON is still on its first stage. Below plans are still under development.
-Automate Data Access Monitoring-based Memory Operation Schemes Execution
-The ultimate goal of DAMON is being used as a building block of the data access
-pattern aware kernel memory management subsystem optimization. However, as
-always, some users having very special workloads will want to do their
-optimization. DAMON will automate most of the tasks for such manual
-optimizations soon. Users will be required to only describe what kind of data
-access pattern-based operation schemes they want in a simple form.
-By applying a very simple scheme for THP promotion/demotion with a prototype
-implementation, DAMON reduced 60% of THP memory footprint overhead while
-preserving 50% of the THP performance benefit. The detailed results can be
-seen on an external web page _.
-Several RFC patchsets for this plan are available _.
-..  https://damonitor.github.io/test/result/perf/latest/html/
-..  https://email@example.com/
diff --git a/Documentation/admin-guide/mm/damon/usage.rst b/Documentation/admin-guide/mm/damon/usage.rst
index c265de653aef..2f5b67302094 100644
@@ -231,11 +231,71 @@ Similar to that of ``heats --heatmap``, it also supports 'gnuplot' based simple
visualization of the distribution via ``--plot`` option.
+DAMON-based Operation Schemes
+The ``schemes`` subcommand allows users to do DAMON-based memory management
+optimizations in a few seconds. Similar to ``record``, it receives monitoring
+attributes and target. However, in addition to those, ``schemes`` receives
+data access pattern-based memory operation schemes, which describes what memory
+operation action should be applied to memory regions showing specific data
+access pattern. Then, it starts the data access monitoring and automatically
+applies the schemes to the targets.
+The operation schemes should be saved in a text file in below format and passed
+to ``schemes`` subcommand via ``--schemes`` option. ::
+ min-size max-size min-acc max-acc min-age max-age action
+The format also supports comments, several units for size and age of regions,
+and human readable action names. Currently supported operation actions are
+``willneed``, ``cold``, ``pageout``, ``hugepage`` and ``nohugepage``. Each of
+the actions works same to the madvise() system call hints having the name.
+Please also note that the range is inclusive (closed interval), and ``0`` for
+max values means infinite. Below example schemes are possible. ::
+ # format is:
+ # <min/max size> <min/max frequency (0-99)> <min/max age> <action>
+ # B/K/M/G/T for Bytes/KiB/MiB/GiB/TiB
+ # us/ms/s/m/h/d for micro-seconds/milli-seconds/seconds/minutes/hours/days
+ # 'null' means zero for size and age.
+ # if a region keeps a high access frequency for >=100ms, put the region on
+ # the head of the LRU list (call madvise() with MADV_WILLNEED).
+ null null 80 null 100ms 0s willneed
+ # if a region keeps a low access frequency at least 200ms and at most one
+ # hour, put the region on the tail of the LRU list (call madvise() with
+ # MADV_COLD).
+ 0B 0B 10 20 200ms 1h cold
+ # if a region keeps a very low access frequency for >=1 minute, swap
+ # out the region immediately (call madvise() with MADV_PAGEOUT).
+ 0B null 0 10 60s 0s pageout
+ # if a region of a size >=2MiB keeps a very high access frequency for
+ # >=100ms, let the region to use huge pages (call madvise() with
+ # MADV_HUGEPAGE).
+ 2M null 90 99 100ms 0s hugepage
+ # If a region of a size >=2MiB keeps small access frequency for >=100ms,
+ # avoid the region using huge pages (call madvise() with MADV_NOHUGEPAGE).
+ 2M null 0 25 100ms 0s nohugepage
+For example, you can make a running process named 'foo' to use huge pages for
+memory regions keeping 2MB or larger size and having very high access frequency
+for at least 100 milliseconds using below commands::
+ $ echo "2M null 90 99 100ms 0s hugepage" > my_thp_scheme
+ $ ./damo schemes --schemes my_thp_scheme `pidof foo`
-DAMON exports four files, ``attrs``, ``pids``, ``record``, and ``monitor_on``
-under its debugfs directory, ``<debugfs>/damon/``.
+DAMON exports five files, ``attrs``, ``pids``, ``record``, ``schemes`` and
+``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``.
@@ -285,17 +345,64 @@ saved in ``/damon.data``. ::
+For usual DAMON-based data access aware memory management optimizations, users
+would simply want the system to apply a memory management action to a memory
+region of a specific size having a specific access frequency for a specific
+time. DAMON receives such formalized operation schemes from the user and
+applies those to the target processes. It also counts the total number and
+size of regions that each scheme is applied. This statistics can be used for
+online analysis or tuning of the schemes.
+Users can get and set the schemes by reading from and writing to ``schemes``
+debugfs file. Reading the file also shows the statistics of each scheme. To
+the file, each of the schemes should be represented in each line in below form:
+ min-size max-size min-acc max-acc min-age max-age action
+Note that the ranges are closed interval. Bytes for the size of regions
+(``min-size`` and ``max-size``), number of monitored accesses per aggregate
+interval for access frequency (``min-acc`` and ``max-acc``), number of
+aggregate intervals for the age of regions (``min-age`` and ``max-age``), and a
+predefined integer for memory management actions should be used. The supported
+numbers and their
+meanings are as below.
+ - 0: Call ``madvise()`` for the region with ``MADV_WILLNEED``
+ - 1: Call ``madvise()`` for the region with ``MADV_COLD``
+ - 2: Call ``madvise()`` for the region with ``MADV_PAGEOUT``
+ - 3: Call ``madvise()`` for the region with ``MADV_HUGEPAGE``
+ - 4: Call ``madvise()`` for the region with ``MADV_NOHUGEPAGE``
+ - 5: Do nothing but count the statistics
+You can disable schemes by simply writing an empty string to the file. For
+example, below commands applies a scheme saying "If a memory region >=4KiB is
+showing <=5 accesses per aggregate interval (0 5) for >=5 aggregate interval (5
+0), page out the region (2)", check the entered scheme again, and finally
+remove the scheme. ::
+ # cd <debugfs>/damon
+ # echo "4096 0 0 5 5 0 2" > schemes
+ # cat schemes
+ 4096 0 0 5 5 0 2 0 0
+ # echo > schemes
+The last two integers in the 4th line of above example is the total number and
+the total size of the regions that the scheme is applied.
-Setting the attributes as described above doesn't incur effect unless you
-explicitly start the monitoring. You can start, stop, and check the current
-status of the monitoring by writing to and reading from the ``monitor_on``
-file. Writing ``on`` to the file make DAMON start monitoring of the target
-processes with the attributes. Recording will also start if requested before.
-Writing ``off`` to the file stops those. DAMON also stops if every target
-process is terminated. Below example commands turn on, off, and check the
-status of DAMON::
+Setting the attributes and schemes as described above doesn't incur effect
+unless you explicitly start the monitoring. You can start, stop, and check
+the current status of the monitoring by writing to and reading from the
+``monitor_on`` file. Writing ``on`` to the file make DAMON start monitoring
+of the target processes with the attributes. Recording and schemes applying
+will also start if requested before. Writing ``off`` to the file stops those.
+DAMON also stops if every target process is terminated. Below example
+commands turn on, off, and check the status of DAMON::
# cd <debugfs>/damon
# echo on > monitor_on
prev parent reply other threads:[~2020-06-16 7:43 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-16 7:38 [RFC v12 0/8] Implement Data Access Monitoring-based Memory Operation Schemes SeongJae Park
2020-06-16 7:38 ` [RFC v12 1/8] mm/madvise: Export do_madvise() to external GPL modules SeongJae Park
2020-06-16 7:38 ` [RFC v12 2/8] mm/damon: Account age of target regions SeongJae Park
2020-06-16 7:38 ` [RFC v12 3/8] mm/damon: Implement data access monitoring-based operation schemes SeongJae Park
2020-06-16 7:38 ` [RFC v12 4/8] mm/damon/schemes: Implement a debugfs interface SeongJae Park
2020-06-16 7:38 ` [RFC v12 5/8] mm/damon/schemes: Implement statistics feature SeongJae Park
2020-06-16 7:38 ` [RFC v12 6/8] mm/damon/selftests: Add 'schemes' debugfs tests SeongJae Park
2020-06-16 7:38 ` [RFC v12 7/8] damon/tools: Support more human friendly 'schemes' control SeongJae Park
2020-06-16 7:38 ` SeongJae Park [this message]
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).