linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: SeongJae Park <sjpark@amazon.com>
To: <akpm@linux-foundation.org>
Cc: SeongJae Park <sjpark@amazon.de>, <Jonathan.Cameron@Huawei.com>,
	<aarcange@redhat.com>, <acme@kernel.org>,
	<alexander.shishkin@linux.intel.com>, <amit@kernel.org>,
	<benh@kernel.crashing.org>, <brendan.d.gregg@gmail.com>,
	<brendanhiggins@google.com>, <cai@lca.pw>,
	<colin.king@canonical.com>, <corbet@lwn.net>, <david@redhat.com>,
	<dwmw@amazon.com>, <fan.du@intel.com>, <foersleo@amazon.de>,
	<gthelen@google.com>, <irogers@google.com>, <jolsa@redhat.com>,
	<kirill@shutemov.name>, <mark.rutland@arm.com>, <mgorman@suse.de>,
	<minchan@kernel.org>, <mingo@redhat.com>, <namhyung@kernel.org>,
	<peterz@infradead.org>, <rdunlap@infradead.org>,
	<riel@surriel.com>, <rientjes@google.com>, <rostedt@goodmis.org>,
	<rppt@kernel.org>, <sblbir@amazon.com>, <shakeelb@google.com>,
	<shuah@kernel.org>, <sj38.park@gmail.com>, <snu@amazon.de>,
	<vbabka@suse.cz>, <vdavydov.dev@gmail.com>,
	<yang.shi@linux.alibaba.com>, <ying.huang@intel.com>,
	<linux-damon@amazon.com>, <linux-mm@kvack.org>,
	<linux-doc@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [RFC v6 01/10] mm/damon/debugfs: Allow users to set initial monitoring target regions
Date: Wed, 5 Aug 2020 08:59:42 +0200	[thread overview]
Message-ID: <20200805065951.18221-2-sjpark@amazon.com> (raw)
In-Reply-To: <20200805065951.18221-1-sjpark@amazon.com>

From: SeongJae Park <sjpark@amazon.de>

Some users would want to monitor only a part of the entire virtual
memory address space.  The '->init_target_regions' callback is therefore
provided, but only programming interface can use it.

For the reason, this commit introduces a new debugfs file,
'init_region'.  Users can specify which initial monitoring target
address regions they want by writing special input to the file.  The
input should describe each region in each line in below form:

    <pid> <start address> <end address>

This commit also makes the default '->init_target_regions' callback,
'kdamon_init_vm_regions()' to do nothing if the user has set the initial
target regions already.

Note that the regions will be updated to cover entire memory mapped
regions after 'regions update interval'.  If you want the regions to not
be updated after the initial setting, you could set the interval as a
very long time, say, a few decades.

Signed-off-by: SeongJae Park <sjpark@amazon.de>
---
 mm/damon.c | 156 +++++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 152 insertions(+), 4 deletions(-)

diff --git a/mm/damon.c b/mm/damon.c
index d25aeccf7939..b2507bae6c57 100644
--- a/mm/damon.c
+++ b/mm/damon.c
@@ -1928,6 +1928,147 @@ static ssize_t debugfs_record_write(struct file *file,
 	return ret;
 }
 
+static ssize_t sprint_init_regions(struct damon_ctx *c, char *buf, ssize_t len)
+{
+	struct damon_target *t;
+	struct damon_region *r;
+	int written = 0;
+	int rc;
+
+	damon_for_each_target(t, c) {
+		damon_for_each_region(r, t) {
+			rc = snprintf(&buf[written], len - written,
+					"%lu %lu %lu\n",
+					t->id, r->ar.start, r->ar.end);
+			if (!rc)
+				return -ENOMEM;
+			written += rc;
+		}
+	}
+	return written;
+}
+
+static ssize_t debugfs_init_regions_read(struct file *file, char __user *buf,
+		size_t count, loff_t *ppos)
+{
+	struct damon_ctx *ctx = &damon_user_ctx;
+	char *kbuf;
+	ssize_t len;
+
+	kbuf = kmalloc(count, GFP_KERNEL);
+	if (!kbuf)
+		return -ENOMEM;
+
+	mutex_lock(&ctx->kdamond_lock);
+	if (ctx->kdamond) {
+		mutex_unlock(&ctx->kdamond_lock);
+		return -EBUSY;
+	}
+
+	len = sprint_init_regions(ctx, kbuf, count);
+	mutex_unlock(&ctx->kdamond_lock);
+	if (len < 0)
+		goto out;
+	len = simple_read_from_buffer(buf, count, ppos, kbuf, len);
+
+out:
+	kfree(kbuf);
+	return len;
+}
+
+static int add_init_region(struct damon_ctx *c,
+			 unsigned long target_id, struct damon_addr_range *ar)
+{
+	struct damon_target *t;
+	struct damon_region *r, *prev;
+	int rc = -EINVAL;
+
+	if (ar->start >= ar->end)
+		return -EINVAL;
+
+	damon_for_each_target(t, c) {
+		if (t->id == target_id) {
+			r = damon_new_region(ar->start, ar->end);
+			if (!r)
+				return -ENOMEM;
+			damon_add_region(r, t);
+			if (nr_damon_regions(t) > 1) {
+				prev = damon_prev_region(r);
+				if (prev->ar.end > r->ar.start) {
+					damon_destroy_region(r);
+					return -EINVAL;
+				}
+			}
+			rc = 0;
+		}
+	}
+	return rc;
+}
+
+static int set_init_regions(struct damon_ctx *c, const char *str, ssize_t len)
+{
+	struct damon_target *t;
+	struct damon_region *r, *next;
+	int pos = 0, parsed, ret;
+	unsigned long target_id;
+	struct damon_addr_range ar;
+	int err;
+
+	damon_for_each_target(t, c) {
+		damon_for_each_region_safe(r, next, t)
+			damon_destroy_region(r);
+	}
+
+	while (pos < len) {
+		ret = sscanf(&str[pos], "%lu %lu %lu%n",
+				&target_id, &ar.start, &ar.end, &parsed);
+		if (ret != 3)
+			break;
+		err = add_init_region(c, target_id, &ar);
+		if (err)
+			goto fail;
+		pos += parsed;
+	}
+
+	return 0;
+
+fail:
+	damon_for_each_target(t, c) {
+		damon_for_each_region_safe(r, next, t)
+			damon_destroy_region(r);
+	}
+	return err;
+}
+
+static ssize_t debugfs_init_regions_write(struct file *file,
+					  const char __user *buf, size_t count,
+					  loff_t *ppos)
+{
+	struct damon_ctx *ctx = &damon_user_ctx;
+	char *kbuf;
+	ssize_t ret = count;
+	int err;
+
+	kbuf = user_input_str(buf, count, ppos);
+	if (IS_ERR(kbuf))
+		return PTR_ERR(kbuf);
+
+	mutex_lock(&ctx->kdamond_lock);
+	if (ctx->kdamond) {
+		ret = -EBUSY;
+		goto unlock_out;
+	}
+
+	err = set_init_regions(ctx, kbuf, ret);
+	if (err)
+		ret = err;
+
+unlock_out:
+	mutex_unlock(&ctx->kdamond_lock);
+	kfree(kbuf);
+	return ret;
+}
+
 static ssize_t debugfs_attrs_read(struct file *file,
 		char __user *buf, size_t count, loff_t *ppos)
 {
@@ -2004,6 +2145,12 @@ static const struct file_operations record_fops = {
 	.write = debugfs_record_write,
 };
 
+static const struct file_operations init_regions_fops = {
+	.owner = THIS_MODULE,
+	.read = debugfs_init_regions_read,
+	.write = debugfs_init_regions_write,
+};
+
 static const struct file_operations attrs_fops = {
 	.owner = THIS_MODULE,
 	.read = debugfs_attrs_read,
@@ -2014,10 +2161,11 @@ static struct dentry *debugfs_root;
 
 static int __init damon_debugfs_init(void)
 {
-	const char * const file_names[] = {"attrs", "record", "schemes",
-		"target_ids", "monitor_on"};
-	const struct file_operations *fops[] = {&attrs_fops, &record_fops,
-		&schemes_fops, &target_ids_fops, &monitor_on_fops};
+	const char * const file_names[] = {"attrs", "init_regions", "record",
+		"schemes", "target_ids", "monitor_on"};
+	const struct file_operations *fops[] = {&attrs_fops,
+		&init_regions_fops, &record_fops, &schemes_fops,
+		&target_ids_fops, &monitor_on_fops};
 	int i;
 
 	debugfs_root = debugfs_create_dir("damon", NULL);
-- 
2.17.1



  reply	other threads:[~2020-08-05  7:01 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-05  6:59 [RFC v6 00/10] DAMON: Support Physical Memory Address Space Monitoring SeongJae Park
2020-08-05  6:59 ` SeongJae Park [this message]
2020-08-05  6:59 ` [RFC v6 02/10] tools/damon: Support init target regions specification SeongJae Park
2020-08-05  6:59 ` [RFC v6 03/10] mm/damon-test: Add more unit tests for 'init_regions' SeongJae Park
2020-08-05  6:59 ` [RFC v6 04/10] selftests/damon/_chk_record: Do not check number of gaps SeongJae Park
2020-08-05  6:59 ` [RFC v6 05/10] Docs/admin-guide/mm/damon: Document 'init_regions' feature SeongJae Park
2020-08-05  6:59 ` [RFC v6 06/10] mm/damon: Implement callbacks for physical memory monitoring SeongJae Park
2020-08-05  6:59 ` [RFC v6 07/10] mm/damon/debugfs: Support " SeongJae Park
2020-08-05  6:59 ` [RFC v6 08/10] tools/damon/record: " SeongJae Park
2020-08-05  6:59 ` [RFC v6 09/10] tools/damon/record: Support NUMA specific recording SeongJae Park
2020-08-05  6:59 ` [RFC v6 10/10] Docs/DAMON: Document physical memory monitoring support SeongJae Park
2020-08-06  8:31 ` [RFC v6 00/10] DAMON: Support Physical Memory Address Space Monitoring SeongJae Park

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200805065951.18221-2-sjpark@amazon.com \
    --to=sjpark@amazon.com \
    --cc=Jonathan.Cameron@Huawei.com \
    --cc=aarcange@redhat.com \
    --cc=acme@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=alexander.shishkin@linux.intel.com \
    --cc=amit@kernel.org \
    --cc=benh@kernel.crashing.org \
    --cc=brendan.d.gregg@gmail.com \
    --cc=brendanhiggins@google.com \
    --cc=cai@lca.pw \
    --cc=colin.king@canonical.com \
    --cc=corbet@lwn.net \
    --cc=david@redhat.com \
    --cc=dwmw@amazon.com \
    --cc=fan.du@intel.com \
    --cc=foersleo@amazon.de \
    --cc=gthelen@google.com \
    --cc=irogers@google.com \
    --cc=jolsa@redhat.com \
    --cc=kirill@shutemov.name \
    --cc=linux-damon@amazon.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mark.rutland@arm.com \
    --cc=mgorman@suse.de \
    --cc=minchan@kernel.org \
    --cc=mingo@redhat.com \
    --cc=namhyung@kernel.org \
    --cc=peterz@infradead.org \
    --cc=rdunlap@infradead.org \
    --cc=riel@surriel.com \
    --cc=rientjes@google.com \
    --cc=rostedt@goodmis.org \
    --cc=rppt@kernel.org \
    --cc=sblbir@amazon.com \
    --cc=shakeelb@google.com \
    --cc=shuah@kernel.org \
    --cc=sj38.park@gmail.com \
    --cc=sjpark@amazon.de \
    --cc=snu@amazon.de \
    --cc=vbabka@suse.cz \
    --cc=vdavydov.dev@gmail.com \
    --cc=yang.shi@linux.alibaba.com \
    --cc=ying.huang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).