From: Andrew Morton <akpm@linux-foundation.org>
To: akpm@linux-foundation.org, arnd@arndb.de, linux-mm@kvack.org,
mm-commits@vger.kernel.org, torvalds@linux-foundation.org,
viro@zeniv.linux.org.uk, willemb@google.com, willy@infradead.org
Subject: [patch 77/78] epoll: wire up syscall epoll_pwait2
Date: Fri, 18 Dec 2020 14:05:41 -0800 [thread overview]
Message-ID: <20201218220541.HmQ5hLrPx%akpm@linux-foundation.org> (raw)
In-Reply-To: <20201218140046.497484741326828e5b5d46ec@linux-foundation.org>
From: Willem de Bruijn <willemb@google.com>
Subject: epoll: wire up syscall epoll_pwait2
Split off from prev patch in the series that implements the syscall.
Link: https://lkml.kernel.org/r/20201121144401.3727659-4-willemdebruijn.kernel@gmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/alpha/kernel/syscalls/syscall.tbl | 1 +
arch/arm/tools/syscall.tbl | 1 +
arch/arm64/include/asm/unistd.h | 2 +-
arch/arm64/include/asm/unistd32.h | 2 ++
arch/ia64/kernel/syscalls/syscall.tbl | 1 +
arch/m68k/kernel/syscalls/syscall.tbl | 1 +
arch/microblaze/kernel/syscalls/syscall.tbl | 1 +
arch/mips/kernel/syscalls/syscall_n32.tbl | 1 +
arch/mips/kernel/syscalls/syscall_n64.tbl | 1 +
arch/mips/kernel/syscalls/syscall_o32.tbl | 1 +
arch/parisc/kernel/syscalls/syscall.tbl | 1 +
arch/powerpc/kernel/syscalls/syscall.tbl | 1 +
arch/s390/kernel/syscalls/syscall.tbl | 1 +
arch/sh/kernel/syscalls/syscall.tbl | 1 +
arch/sparc/kernel/syscalls/syscall.tbl | 1 +
arch/x86/entry/syscalls/syscall_32.tbl | 1 +
arch/x86/entry/syscalls/syscall_64.tbl | 1 +
arch/xtensa/kernel/syscalls/syscall.tbl | 1 +
include/linux/compat.h | 6 ++++++
include/linux/syscalls.h | 5 +++++
include/uapi/asm-generic/unistd.h | 4 +++-
kernel/sys_ni.c | 2 ++
22 files changed, 35 insertions(+), 2 deletions(-)
--- a/arch/alpha/kernel/syscalls/syscall.tbl~epoll-wire-up-syscall-epoll_pwait2
+++ a/arch/alpha/kernel/syscalls/syscall.tbl
@@ -480,3 +480,4 @@
548 common pidfd_getfd sys_pidfd_getfd
549 common faccessat2 sys_faccessat2
550 common process_madvise sys_process_madvise
+551 common epoll_pwait2 sys_epoll_pwait2
--- a/arch/arm64/include/asm/unistd32.h~epoll-wire-up-syscall-epoll_pwait2
+++ a/arch/arm64/include/asm/unistd32.h
@@ -889,6 +889,8 @@ __SYSCALL(__NR_pidfd_getfd, sys_pidfd_ge
__SYSCALL(__NR_faccessat2, sys_faccessat2)
#define __NR_process_madvise 440
__SYSCALL(__NR_process_madvise, sys_process_madvise)
+#define __NR_epoll_pwait2 441
+__SYSCALL(__NR_epoll_pwait2, sys_epoll_pwait2)
/*
* Please add new compat syscalls above this comment and update
--- a/arch/arm64/include/asm/unistd.h~epoll-wire-up-syscall-epoll_pwait2
+++ a/arch/arm64/include/asm/unistd.h
@@ -38,7 +38,7 @@
#define __ARM_NR_compat_set_tls (__ARM_NR_COMPAT_BASE + 5)
#define __ARM_NR_COMPAT_END (__ARM_NR_COMPAT_BASE + 0x800)
-#define __NR_compat_syscalls 441
+#define __NR_compat_syscalls 442
#endif
#define __ARCH_WANT_SYS_CLONE
--- a/arch/arm/tools/syscall.tbl~epoll-wire-up-syscall-epoll_pwait2
+++ a/arch/arm/tools/syscall.tbl
@@ -454,3 +454,4 @@
438 common pidfd_getfd sys_pidfd_getfd
439 common faccessat2 sys_faccessat2
440 common process_madvise sys_process_madvise
+441 common epoll_pwait2 sys_epoll_pwait2
--- a/arch/ia64/kernel/syscalls/syscall.tbl~epoll-wire-up-syscall-epoll_pwait2
+++ a/arch/ia64/kernel/syscalls/syscall.tbl
@@ -361,3 +361,4 @@
438 common pidfd_getfd sys_pidfd_getfd
439 common faccessat2 sys_faccessat2
440 common process_madvise sys_process_madvise
+441 common epoll_pwait2 sys_epoll_pwait2
--- a/arch/m68k/kernel/syscalls/syscall.tbl~epoll-wire-up-syscall-epoll_pwait2
+++ a/arch/m68k/kernel/syscalls/syscall.tbl
@@ -440,3 +440,4 @@
438 common pidfd_getfd sys_pidfd_getfd
439 common faccessat2 sys_faccessat2
440 common process_madvise sys_process_madvise
+441 common epoll_pwait2 sys_epoll_pwait2
--- a/arch/microblaze/kernel/syscalls/syscall.tbl~epoll-wire-up-syscall-epoll_pwait2
+++ a/arch/microblaze/kernel/syscalls/syscall.tbl
@@ -446,3 +446,4 @@
438 common pidfd_getfd sys_pidfd_getfd
439 common faccessat2 sys_faccessat2
440 common process_madvise sys_process_madvise
+441 common epoll_pwait2 sys_epoll_pwait2
--- a/arch/mips/kernel/syscalls/syscall_n32.tbl~epoll-wire-up-syscall-epoll_pwait2
+++ a/arch/mips/kernel/syscalls/syscall_n32.tbl
@@ -379,3 +379,4 @@
438 n32 pidfd_getfd sys_pidfd_getfd
439 n32 faccessat2 sys_faccessat2
440 n32 process_madvise sys_process_madvise
+441 n32 epoll_pwait2 sys_epoll_pwait2
--- a/arch/mips/kernel/syscalls/syscall_n64.tbl~epoll-wire-up-syscall-epoll_pwait2
+++ a/arch/mips/kernel/syscalls/syscall_n64.tbl
@@ -355,3 +355,4 @@
438 n64 pidfd_getfd sys_pidfd_getfd
439 n64 faccessat2 sys_faccessat2
440 n64 process_madvise sys_process_madvise
+441 n64 epoll_pwait2 sys_epoll_pwait2
--- a/arch/mips/kernel/syscalls/syscall_o32.tbl~epoll-wire-up-syscall-epoll_pwait2
+++ a/arch/mips/kernel/syscalls/syscall_o32.tbl
@@ -428,3 +428,4 @@
438 o32 pidfd_getfd sys_pidfd_getfd
439 o32 faccessat2 sys_faccessat2
440 o32 process_madvise sys_process_madvise
+441 o32 epoll_pwait2 sys_epoll_pwait2 compat_sys_epoll_pwait2
--- a/arch/parisc/kernel/syscalls/syscall.tbl~epoll-wire-up-syscall-epoll_pwait2
+++ a/arch/parisc/kernel/syscalls/syscall.tbl
@@ -438,3 +438,4 @@
438 common pidfd_getfd sys_pidfd_getfd
439 common faccessat2 sys_faccessat2
440 common process_madvise sys_process_madvise
+441 common epoll_pwait2 sys_epoll_pwait2 compat_sys_epoll_pwait2
--- a/arch/powerpc/kernel/syscalls/syscall.tbl~epoll-wire-up-syscall-epoll_pwait2
+++ a/arch/powerpc/kernel/syscalls/syscall.tbl
@@ -530,3 +530,4 @@
438 common pidfd_getfd sys_pidfd_getfd
439 common faccessat2 sys_faccessat2
440 common process_madvise sys_process_madvise
+441 common epoll_pwait2 sys_epoll_pwait2 compat_sys_epoll_pwait2
--- a/arch/s390/kernel/syscalls/syscall.tbl~epoll-wire-up-syscall-epoll_pwait2
+++ a/arch/s390/kernel/syscalls/syscall.tbl
@@ -443,3 +443,4 @@
438 common pidfd_getfd sys_pidfd_getfd sys_pidfd_getfd
439 common faccessat2 sys_faccessat2 sys_faccessat2
440 common process_madvise sys_process_madvise sys_process_madvise
+441 common epoll_pwait2 sys_epoll_pwait2 sys_epoll_pwait2
--- a/arch/sh/kernel/syscalls/syscall.tbl~epoll-wire-up-syscall-epoll_pwait2
+++ a/arch/sh/kernel/syscalls/syscall.tbl
@@ -443,3 +443,4 @@
438 common pidfd_getfd sys_pidfd_getfd
439 common faccessat2 sys_faccessat2
440 common process_madvise sys_process_madvise
+441 common epoll_pwait2 sys_epoll_pwait2
--- a/arch/sparc/kernel/syscalls/syscall.tbl~epoll-wire-up-syscall-epoll_pwait2
+++ a/arch/sparc/kernel/syscalls/syscall.tbl
@@ -486,3 +486,4 @@
438 common pidfd_getfd sys_pidfd_getfd
439 common faccessat2 sys_faccessat2
440 common process_madvise sys_process_madvise
+441 common epoll_pwait2 sys_epoll_pwait2
--- a/arch/x86/entry/syscalls/syscall_32.tbl~epoll-wire-up-syscall-epoll_pwait2
+++ a/arch/x86/entry/syscalls/syscall_32.tbl
@@ -445,3 +445,4 @@
438 i386 pidfd_getfd sys_pidfd_getfd
439 i386 faccessat2 sys_faccessat2
440 i386 process_madvise sys_process_madvise
+441 i386 epoll_pwait2 sys_epoll_pwait2 compat_sys_epoll_pwait2
--- a/arch/x86/entry/syscalls/syscall_64.tbl~epoll-wire-up-syscall-epoll_pwait2
+++ a/arch/x86/entry/syscalls/syscall_64.tbl
@@ -362,6 +362,7 @@
438 common pidfd_getfd sys_pidfd_getfd
439 common faccessat2 sys_faccessat2
440 common process_madvise sys_process_madvise
+441 common epoll_pwait2 sys_epoll_pwait2
#
# Due to a historical design error, certain syscalls are numbered differently
--- a/arch/xtensa/kernel/syscalls/syscall.tbl~epoll-wire-up-syscall-epoll_pwait2
+++ a/arch/xtensa/kernel/syscalls/syscall.tbl
@@ -411,3 +411,4 @@
438 common pidfd_getfd sys_pidfd_getfd
439 common faccessat2 sys_faccessat2
440 common process_madvise sys_process_madvise
+441 common epoll_pwait2 sys_epoll_pwait2
--- a/include/linux/compat.h~epoll-wire-up-syscall-epoll_pwait2
+++ a/include/linux/compat.h
@@ -537,6 +537,12 @@ asmlinkage long compat_sys_epoll_pwait(i
int maxevents, int timeout,
const compat_sigset_t __user *sigmask,
compat_size_t sigsetsize);
+asmlinkage long compat_sys_epoll_pwait2(int epfd,
+ struct epoll_event __user *events,
+ int maxevents,
+ const struct __kernel_timespec __user *timeout,
+ const compat_sigset_t __user *sigmask,
+ compat_size_t sigsetsize);
/* fs/fcntl.c */
asmlinkage long compat_sys_fcntl(unsigned int fd, unsigned int cmd,
--- a/include/linux/syscalls.h~epoll-wire-up-syscall-epoll_pwait2
+++ a/include/linux/syscalls.h
@@ -362,6 +362,11 @@ asmlinkage long sys_epoll_pwait(int epfd
int maxevents, int timeout,
const sigset_t __user *sigmask,
size_t sigsetsize);
+asmlinkage long sys_epoll_pwait2(int epfd, struct epoll_event __user *events,
+ int maxevents,
+ const struct __kernel_timespec __user *timeout,
+ const sigset_t __user *sigmask,
+ size_t sigsetsize);
/* fs/fcntl.c */
asmlinkage long sys_dup(unsigned int fildes);
--- a/include/uapi/asm-generic/unistd.h~epoll-wire-up-syscall-epoll_pwait2
+++ a/include/uapi/asm-generic/unistd.h
@@ -859,9 +859,11 @@ __SYSCALL(__NR_pidfd_getfd, sys_pidfd_ge
__SYSCALL(__NR_faccessat2, sys_faccessat2)
#define __NR_process_madvise 440
__SYSCALL(__NR_process_madvise, sys_process_madvise)
+#define __NR_epoll_pwait2 441
+__SC_COMP(__NR_epoll_pwait2, sys_epoll_pwait2, compat_sys_epoll_pwait2)
#undef __NR_syscalls
-#define __NR_syscalls 441
+#define __NR_syscalls 442
/*
* 32 bit systems traditionally used different
--- a/kernel/sys_ni.c~epoll-wire-up-syscall-epoll_pwait2
+++ a/kernel/sys_ni.c
@@ -68,6 +68,8 @@ COND_SYSCALL(epoll_create1);
COND_SYSCALL(epoll_ctl);
COND_SYSCALL(epoll_pwait);
COND_SYSCALL_COMPAT(epoll_pwait);
+COND_SYSCALL(epoll_pwait2);
+COND_SYSCALL_COMPAT(epoll_pwait2);
/* fs/fcntl.c */
_
next prev parent reply other threads:[~2020-12-18 22:05 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-18 22:00 incoming Andrew Morton
2020-12-18 22:01 ` [patch 01/78] mm/memcg: bail early from swap accounting if memcg disabled Andrew Morton
2020-12-18 22:01 ` [patch 02/78] mm/memcg: warning on !memcg after readahead page charged Andrew Morton
2020-12-18 22:01 ` [patch 03/78] mm/memcg: remove unused definitions Andrew Morton
2020-12-18 22:01 ` [patch 04/78] mm, kvm: account kvm_vcpu_mmap to kmemcg Andrew Morton
2020-12-18 22:01 ` [patch 05/78] mm/memcontrol:rewrite mem_cgroup_page_lruvec() Andrew Morton
2020-12-18 22:01 ` [patch 06/78] epoll: check for events when removing a timed out thread from the wait queue Andrew Morton
2020-12-18 22:01 ` [patch 07/78] epoll: simplify signal handling Andrew Morton
2020-12-18 22:01 ` [patch 08/78] epoll: pull fatal signal checks into ep_send_events() Andrew Morton
2020-12-18 22:01 ` [patch 09/78] epoll: move eavail next to the list_empty_careful check Andrew Morton
2020-12-18 22:01 ` [patch 10/78] epoll: simplify and optimize busy loop logic Andrew Morton
2020-12-18 22:02 ` [patch 11/78] epoll: pull all code between fetch_events and send_event into the loop Andrew Morton
2020-12-18 22:02 ` [patch 12/78] epoll: replace gotos with a proper loop Andrew Morton
2020-12-18 22:02 ` [patch 13/78] epoll: eliminate unnecessary lock for zero timeout Andrew Morton
2020-12-18 22:02 ` [patch 14/78] kasan: drop unnecessary GPL text from comment headers Andrew Morton
2020-12-18 22:02 ` [patch 15/78] kasan: KASAN_VMALLOC depends on KASAN_GENERIC Andrew Morton
2020-12-18 22:02 ` [patch 16/78] kasan: group vmalloc code Andrew Morton
2020-12-18 22:02 ` [patch 17/78] kasan: shadow declarations only for software modes Andrew Morton
2020-12-18 22:02 ` [patch 18/78] kasan: rename (un)poison_shadow to (un)poison_range Andrew Morton
2020-12-18 22:02 ` [patch 19/78] kasan: rename KASAN_SHADOW_* to KASAN_GRANULE_* Andrew Morton
2020-12-18 22:02 ` [patch 20/78] kasan: only build init.c for software modes Andrew Morton
2020-12-18 22:02 ` [patch 21/78] kasan: split out shadow.c from common.c Andrew Morton
2020-12-19 0:28 ` Marco Elver
2020-12-19 1:13 ` Andrew Morton
2020-12-19 10:01 ` Marco Elver
2020-12-19 10:11 ` Marco Elver
2020-12-19 18:01 ` Andrey Konovalov
2020-12-19 19:17 ` Linus Torvalds
2020-12-19 19:26 ` Linus Torvalds
2020-12-21 9:46 ` Alexander Potapenko
2020-12-21 17:41 ` Linus Torvalds
2020-12-22 18:38 ` Andrew Morton
2020-12-22 12:00 ` kernel test robot
2020-12-18 22:02 ` [patch 22/78] kasan: define KASAN_MEMORY_PER_SHADOW_PAGE Andrew Morton
2020-12-18 22:02 ` [patch 23/78] kasan: rename report and tags files Andrew Morton
2020-12-18 22:02 ` [patch 24/78] kasan: don't duplicate config dependencies Andrew Morton
2020-12-18 22:02 ` [patch 25/78] kasan: hide invalid free check implementation Andrew Morton
2020-12-18 22:02 ` [patch 26/78] kasan: decode stack frame only with KASAN_STACK_ENABLE Andrew Morton
2020-12-18 22:02 ` [patch 27/78] kasan, arm64: only init shadow for software modes Andrew Morton
2020-12-18 22:02 ` [patch 28/78] kasan, arm64: only use kasan_depth " Andrew Morton
2020-12-18 22:03 ` [patch 29/78] kasan, arm64: move initialization message Andrew Morton
2020-12-18 22:03 ` [patch 30/78] kasan, arm64: rename kasan_init_tags and mark as __init Andrew Morton
2020-12-18 22:03 ` [patch 31/78] kasan: rename addr_has_shadow to addr_has_metadata Andrew Morton
2020-12-18 22:03 ` [patch 32/78] kasan: rename print_shadow_for_address to print_memory_metadata Andrew Morton
2020-12-18 22:03 ` [patch 33/78] kasan: rename SHADOW layout macros to META Andrew Morton
2020-12-18 22:03 ` [patch 34/78] kasan: separate metadata_fetch_row for each mode Andrew Morton
2020-12-18 22:03 ` [patch 35/78] kasan: introduce CONFIG_KASAN_HW_TAGS Andrew Morton
2020-12-18 22:03 ` [patch 36/78] arm64: enable armv8.5-a asm-arch option Andrew Morton
2020-12-18 22:03 ` [patch 37/78] arm64: mte: add in-kernel MTE helpers Andrew Morton
2020-12-18 22:03 ` [patch 38/78] arm64: mte: reset the page tag in page->flags Andrew Morton
2020-12-18 22:03 ` [patch 39/78] arm64: mte: add in-kernel tag fault handler Andrew Morton
2020-12-18 22:03 ` [patch 40/78] arm64: kasan: allow enabling in-kernel MTE Andrew Morton
2020-12-18 22:03 ` [patch 41/78] arm64: mte: convert gcr_user into an exclude mask Andrew Morton
2020-12-18 22:03 ` [patch 42/78] arm64: mte: switch GCR_EL1 in kernel entry and exit Andrew Morton
2020-12-18 22:03 ` [patch 43/78] kasan, mm: untag page address in free_reserved_area Andrew Morton
2020-12-18 22:03 ` [patch 44/78] arm64: kasan: align allocations for HW_TAGS Andrew Morton
2020-12-18 22:03 ` [patch 45/78] arm64: kasan: add arch layer for memory tagging helpers Andrew Morton
2020-12-18 22:03 ` [patch 46/78] kasan: define KASAN_GRANULE_SIZE for HW_TAGS Andrew Morton
2020-12-18 22:03 ` [patch 47/78] kasan, x86, s390: update undef CONFIG_KASAN Andrew Morton
2020-12-18 22:04 ` [patch 48/78] kasan, arm64: expand CONFIG_KASAN checks Andrew Morton
2020-12-18 22:04 ` [patch 49/78] kasan, arm64: implement HW_TAGS runtime Andrew Morton
2020-12-18 22:04 ` [patch 50/78] kasan, arm64: print report from tag fault handler Andrew Morton
2020-12-18 22:04 ` [patch 51/78] kasan, mm: reset tags when accessing metadata Andrew Morton
2020-12-18 22:04 ` [patch 52/78] kasan, arm64: enable CONFIG_KASAN_HW_TAGS Andrew Morton
2020-12-18 22:04 ` [patch 53/78] kasan: add documentation for hardware tag-based mode Andrew Morton
2020-12-18 22:04 ` [patch 54/78] kselftest/arm64: check GCR_EL1 after context switch Andrew Morton
2020-12-18 22:04 ` [patch 55/78] kasan: simplify quarantine_put call site Andrew Morton
2020-12-18 22:04 ` [patch 56/78] kasan: rename get_alloc/free_info Andrew Morton
2020-12-18 22:04 ` [patch 57/78] kasan: introduce set_alloc_info Andrew Morton
2020-12-18 22:04 ` [patch 58/78] kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK Andrew Morton
2020-12-18 22:04 ` [patch 59/78] kasan: allow VMAP_STACK for HW_TAGS mode Andrew Morton
2020-12-18 22:04 ` [patch 60/78] kasan: remove __kasan_unpoison_stack Andrew Morton
2020-12-18 22:04 ` [patch 61/78] kasan: inline kasan_reset_tag for tag-based modes Andrew Morton
2020-12-18 22:04 ` [patch 62/78] kasan: inline random_tag for HW_TAGS Andrew Morton
2020-12-18 22:04 ` [patch 63/78] kasan: open-code kasan_unpoison_slab Andrew Morton
2020-12-18 22:04 ` [patch 64/78] kasan: inline (un)poison_range and check_invalid_free Andrew Morton
2020-12-22 14:02 ` kernel test robot
2020-12-18 22:05 ` [patch 65/78] kasan: add and integrate kasan boot parameters Andrew Morton
2020-12-18 22:05 ` [patch 66/78] kasan, mm: check kasan_enabled in annotations Andrew Morton
2020-12-18 22:05 ` [patch 67/78] kasan, mm: rename kasan_poison_kfree Andrew Morton
2020-12-18 22:05 ` [patch 68/78] kasan: don't round_up too much Andrew Morton
2020-12-18 22:05 ` [patch 69/78] kasan: simplify assign_tag and set_tag calls Andrew Morton
2020-12-18 22:05 ` [patch 70/78] kasan: clarify comment in __kasan_kfree_large Andrew Morton
2020-12-18 22:05 ` [patch 71/78] kasan: sanitize objects when metadata doesn't fit Andrew Morton
2020-12-18 22:05 ` [patch 72/78] kasan, mm: allow cache merging with no metadata Andrew Morton
2020-12-18 22:05 ` [patch 73/78] kasan: update documentation Andrew Morton
2020-12-18 22:05 ` [patch 74/78] mm/Kconfig: fix spelling mistake "whats" -> "what's" Andrew Morton
2020-12-18 22:05 ` [patch 75/78] epoll: convert internal api to timespec64 Andrew Morton
2020-12-18 22:05 ` [patch 76/78] epoll: add syscall epoll_pwait2 Andrew Morton
2020-12-18 22:05 ` Andrew Morton [this message]
2020-12-18 22:05 ` [patch 78/78] selftests/filesystems: expand epoll with epoll_pwait2 Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201218220541.HmQ5hLrPx%akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=arnd@arndb.de \
--cc=linux-mm@kvack.org \
--cc=mm-commits@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
--cc=viro@zeniv.linux.org.uk \
--cc=willemb@google.com \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).