linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Mel Gorman <mgorman@techsingularity.net>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: NeilBrown <neilb@suse.de>, Theodore Ts'o <tytso@mit.edu>,
	Andreas Dilger <adilger.kernel@dilger.ca>,
	"Darrick J . Wong" <djwong@kernel.org>,
	Matthew Wilcox <willy@infradead.org>,
	Michal Hocko <mhocko@suse.com>,
	Dave Chinner <david@fromorbit.com>,
	Rik van Riel <riel@surriel.com>, Vlastimil Babka <vbabka@suse.cz>,
	Johannes Weiner <hannes@cmpxchg.org>,
	Jonathan Corbet <corbet@lwn.net>, Linux-MM <linux-mm@kvack.org>,
	Linux-fsdevel <linux-fsdevel@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>,
	Mel Gorman <mgorman@techsingularity.net>
Subject: [PATCH 6/8] mm/vmscan: Centralise timeout values for reclaim_throttle
Date: Tue, 19 Oct 2021 10:01:06 +0100	[thread overview]
Message-ID: <20211019090108.25501-7-mgorman@techsingularity.net> (raw)
In-Reply-To: <20211019090108.25501-1-mgorman@techsingularity.net>

Neil Brown raised concerns about callers of reclaim_throttle specifying
a timeout value. The original timeout values to congestion_wait() were
probably pulled out of thin air or copy&pasted from somewhere else.
This patch centralises the timeout values and selects a timeout based
on the reason for reclaim throttling. These figures are also pulled
out of the same thin air but better values may be derived

Running a workload that is throttling for inappropriate periods
and tracing mm_vmscan_throttled can be used to pick a more appropriate
value. Excessive throttling would pick a lower timeout where as
excessive CPU usage in reclaim context would select a larger timeout.
Ideally a large value would always be used and the wakeups would
occur before a timeout but that requires careful testing.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
---
 mm/compaction.c     |  2 +-
 mm/internal.h       |  3 +--
 mm/page-writeback.c |  2 +-
 mm/vmscan.c         | 48 +++++++++++++++++++++++++++++++++------------
 4 files changed, 38 insertions(+), 17 deletions(-)

diff --git a/mm/compaction.c b/mm/compaction.c
index 7359093d8ac0..151b04c4dab3 100644
--- a/mm/compaction.c
+++ b/mm/compaction.c
@@ -828,7 +828,7 @@ isolate_migratepages_block(struct compact_control *cc, unsigned long low_pfn,
 		if (cc->mode == MIGRATE_ASYNC)
 			return -EAGAIN;
 
-		reclaim_throttle(pgdat, VMSCAN_THROTTLE_ISOLATED, HZ/10);
+		reclaim_throttle(pgdat, VMSCAN_THROTTLE_ISOLATED);
 
 		if (fatal_signal_pending(current))
 			return -EINTR;
diff --git a/mm/internal.h b/mm/internal.h
index 3461a1055975..63d8ebbc5a6d 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -129,8 +129,7 @@ extern unsigned long highest_memmap_pfn;
  */
 extern int isolate_lru_page(struct page *page);
 extern void putback_lru_page(struct page *page);
-extern void reclaim_throttle(pg_data_t *pgdat, enum vmscan_throttle_state reason,
-								long timeout);
+extern void reclaim_throttle(pg_data_t *pgdat, enum vmscan_throttle_state reason);
 
 /*
  * in mm/rmap.c:
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index f34f54fcd5b4..4b01a6872f9e 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -2374,7 +2374,7 @@ int do_writepages(struct address_space *mapping, struct writeback_control *wbc)
 		 * guess as any.
 		 */
 		reclaim_throttle(NODE_DATA(numa_node_id()),
-			VMSCAN_THROTTLE_WRITEBACK, HZ/50);
+			VMSCAN_THROTTLE_WRITEBACK);
 	}
 	/*
 	 * Usually few pages are written by now from those we've just submitted
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 14127bbf2c3b..1f5c467dc83c 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1006,12 +1006,10 @@ static void handle_write_error(struct address_space *mapping,
 	unlock_page(page);
 }
 
-void reclaim_throttle(pg_data_t *pgdat, enum vmscan_throttle_state reason,
-							long timeout)
+void reclaim_throttle(pg_data_t *pgdat, enum vmscan_throttle_state reason)
 {
 	wait_queue_head_t *wqh = &pgdat->reclaim_wait[reason];
-	long ret;
-	bool acct_writeback = (reason == VMSCAN_THROTTLE_WRITEBACK);
+	long timeout, ret;
 	DEFINE_WAIT(wait);
 
 	/*
@@ -1023,17 +1021,41 @@ void reclaim_throttle(pg_data_t *pgdat, enum vmscan_throttle_state reason,
 	    current->flags & (PF_IO_WORKER|PF_KTHREAD))
 		return;
 
-	if (acct_writeback &&
-	    atomic_inc_return(&pgdat->nr_writeback_throttled) == 1) {
-		WRITE_ONCE(pgdat->nr_reclaim_start,
-			node_page_state(pgdat, NR_THROTTLED_WRITTEN));
+	/*
+	 * These figures are pulled out of thin air.
+	 * VMSCAN_THROTTLE_ISOLATED is a transient condition based on too many
+	 * parallel reclaimers which is a short-lived event so the timeout is
+	 * short. Failing to make progress or waiting on writeback are
+	 * potentially long-lived events so use a longer timeout. This is shaky
+	 * logic as a failure to make progress could be due to anything from
+	 * writeback to a slow device to excessive references pages at the tail
+	 * of the inactive LRU.
+	 */
+	switch(reason) {
+	case VMSCAN_THROTTLE_NOPROGRESS:
+	case VMSCAN_THROTTLE_WRITEBACK:
+		timeout = HZ/10;
+
+		if (atomic_inc_return(&pgdat->nr_writeback_throttled) == 1) {
+			WRITE_ONCE(pgdat->nr_reclaim_start,
+				node_page_state(pgdat, NR_THROTTLED_WRITTEN));
+		}
+
+		break;
+	case VMSCAN_THROTTLE_ISOLATED:
+		timeout = HZ/50;
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		timeout = HZ;
+		break;
 	}
 
 	prepare_to_wait(wqh, &wait, TASK_UNINTERRUPTIBLE);
 	ret = schedule_timeout(timeout);
 	finish_wait(wqh, &wait);
 
-	if (acct_writeback)
+	if (reason == VMSCAN_THROTTLE_ISOLATED)
 		atomic_dec(&pgdat->nr_writeback_throttled);
 
 	trace_mm_vmscan_throttled(pgdat->node_id, jiffies_to_usecs(timeout),
@@ -2319,7 +2341,7 @@ shrink_inactive_list(unsigned long nr_to_scan, struct lruvec *lruvec,
 
 		/* wait a bit for the reclaimer. */
 		stalled = true;
-		reclaim_throttle(pgdat, VMSCAN_THROTTLE_ISOLATED, HZ/10);
+		reclaim_throttle(pgdat, VMSCAN_THROTTLE_ISOLATED);
 
 		/* We are about to die and free our memory. Return now. */
 		if (fatal_signal_pending(current))
@@ -3251,7 +3273,7 @@ static void shrink_node(pg_data_t *pgdat, struct scan_control *sc)
 		 * until some pages complete writeback.
 		 */
 		if (sc->nr.immediate)
-			reclaim_throttle(pgdat, VMSCAN_THROTTLE_WRITEBACK, HZ/10);
+			reclaim_throttle(pgdat, VMSCAN_THROTTLE_WRITEBACK);
 	}
 
 	/*
@@ -3275,7 +3297,7 @@ static void shrink_node(pg_data_t *pgdat, struct scan_control *sc)
 	if (!current_is_kswapd() && current_may_throttle() &&
 	    !sc->hibernation_mode &&
 	    test_bit(LRUVEC_CONGESTED, &target_lruvec->flags))
-		reclaim_throttle(pgdat, VMSCAN_THROTTLE_WRITEBACK, HZ/10);
+		reclaim_throttle(pgdat, VMSCAN_THROTTLE_WRITEBACK);
 
 	if (should_continue_reclaim(pgdat, sc->nr_reclaimed - nr_reclaimed,
 				    sc))
@@ -3347,7 +3369,7 @@ static void consider_reclaim_throttle(pg_data_t *pgdat, struct scan_control *sc)
 
 	/* Throttle if making no progress at high prioities. */
 	if (sc->priority < DEF_PRIORITY - 2)
-		reclaim_throttle(pgdat, VMSCAN_THROTTLE_NOPROGRESS, HZ/10);
+		reclaim_throttle(pgdat, VMSCAN_THROTTLE_NOPROGRESS);
 }
 
 /*
-- 
2.31.1



  parent reply	other threads:[~2021-10-19  9:02 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-19  9:01 [PATCH v4 0/8] Remove dependency on congestion_wait in mm/ Mel Gorman
2021-10-19  9:01 ` [PATCH 1/8] mm/vmscan: Throttle reclaim until some writeback completes if congested Mel Gorman
2021-10-19  9:01 ` [PATCH 2/8] mm/vmscan: Throttle reclaim and compaction when too may pages are isolated Mel Gorman
2021-10-19 17:12   ` Yang Shi
2021-10-19  9:01 ` [PATCH 3/8] mm/vmscan: Throttle reclaim when no progress is being made Mel Gorman
2021-10-19  9:01 ` [PATCH 4/8] mm/writeback: Throttle based on page writeback instead of congestion Mel Gorman
2021-10-19  9:01 ` [PATCH 5/8] mm/page_alloc: Remove the throttling logic from the page allocator Mel Gorman
2021-10-19  9:20   ` Vlastimil Babka
2021-10-19  9:01 ` Mel Gorman [this message]
2021-10-22  1:06   ` [PATCH 6/8] mm/vmscan: Centralise timeout values for reclaim_throttle NeilBrown
2021-10-22  8:12     ` Mel Gorman
2021-10-19  9:01 ` [PATCH 7/8] mm/vmscan: Increase the timeout if page reclaim is not making progress Mel Gorman
2021-10-22  1:07   ` NeilBrown
2021-10-22  8:14     ` Mel Gorman
2021-10-19  9:01 ` [PATCH 8/8] mm/vmscan: Delay waking of tasks throttled on NOPROGRESS Mel Gorman
2021-10-19 22:00 ` [PATCH v4 0/8] Remove dependency on congestion_wait in mm/ Andrew Morton
2021-10-20  8:44   ` Mel Gorman
2021-10-22  1:15 ` NeilBrown
2021-10-22  8:39   ` Mel Gorman
2021-10-22 11:26     ` NeilBrown
2021-10-22 13:17       ` Mel Gorman
2021-10-27  0:43         ` NeilBrown
2021-10-27 10:13           ` Mel Gorman
  -- strict thread matches above, loose matches on Subject: below --
2021-10-22 14:46 [PATCH v5 " Mel Gorman
2021-10-22 14:46 ` [PATCH 6/8] mm/vmscan: Centralise timeout values for reclaim_throttle Mel Gorman
2021-10-08 13:53 [PATCH v3 0/8] Remove dependency on congestion_wait in mm/ Mel Gorman
2021-10-08 13:53 ` [PATCH 6/8] mm/vmscan: Centralise timeout values for reclaim_throttle Mel Gorman
2021-10-14 15:38   ` Vlastimil Babka

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211019090108.25501-7-mgorman@techsingularity.net \
    --to=mgorman@techsingularity.net \
    --cc=adilger.kernel@dilger.ca \
    --cc=akpm@linux-foundation.org \
    --cc=corbet@lwn.net \
    --cc=david@fromorbit.com \
    --cc=djwong@kernel.org \
    --cc=hannes@cmpxchg.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@suse.com \
    --cc=neilb@suse.de \
    --cc=riel@surriel.com \
    --cc=tytso@mit.edu \
    --cc=vbabka@suse.cz \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).