linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Rokudo Yan <wu-yan@tcl.com>
To: <miklos@szeredi.hu>
Cc: <Ed.Tsai@mediatek.com>, <guoweichao@oppo.com>,
	<huangjianan@oppo.com>, <linux-fsdevel@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-mm@kvack.org>,
	<zhangshiming@oppo.com>
Subject: Re: [fuse-devel] [PATCH] fuse: avoid deadlock when write fuse inode
Date: Thu, 10 Mar 2022 19:10:26 +0800	[thread overview]
Message-ID: <20220310111026.684924-1-wu-yan@tcl.com> (raw)
In-Reply-To: <CAJfpegsbORd5hDhnth5qY1aP-6AZDMe9f9+CyWVhvpEmHPnuwQ@mail.gmail.com>

Hi, Miklos

The similar issue occurs in our Android device(4G RAM + 3G zram + 8 arm cores + kernel-4.14) too.
Under the monkey test, kswapd and fuse daemon thread deadlocked when free pages is extreme low
(less than 1/2 of the min watermark), the backtrace of the 2 threads is as follows. kswapd
try to evict inode to free some memory(blocked at inode_wait_for_writeback), and fuse daemon thread
handle the fuse inode write request, which is throttled when do direct reclaim in page allocation
slow path(blocked at throttle_direct_reclaim). As the __GFP_FS is set, the thread is throttled until
kswapd free enough pages until watermark ok(check allow_direct_reclaim), which cause the deadlock.
Although the kernel version is 4.14, the same issue exists in the upstream kernel too.

kswapd0         D 26485194.538158 157 1287917 23577482 0x1a20840 0x0 157 438599862461462
<ffffff8beec866b4> __switch_to+0x134/0x150
<ffffff8befb838cc> __schedule+0xd5c/0x1100
<ffffff8befb83ce0> schedule+0x70/0x90
<ffffff8befb849b4> bit_wait+0x14/0x54
<ffffff8befb84350> __wait_on_bit+0x74/0xe0
<ffffff8beeeae0b4> inode_wait_for_writeback+0xa0/0xe4
<ffffff8beee9b95c> evict+0xa4/0x284
<ffffff8beee99b58> iput+0x25c/0x2ac
<ffffff8beee9602c> dentry_unlink_inode+0xd8/0xe4
<ffffff8beee93274> __dentry_kill+0xe8/0x22c
<ffffff8beee9374c> shrink_dentry_list+0x19c/0x3b0
<ffffff8beee9340c> prune_dcache_sb+0x54/0x80
<ffffff8beee79c50> super_cache_scan+0x114/0x164
<ffffff8beee16504> shrink_slab+0x454/0x528
<ffffff8beee1b81c> shrink_node+0x144/0x318
<ffffff8beee1a100> kswapd+0x830/0x9e0
<ffffff8beecde9f0> kthread+0x17c/0x18c
<ffffff8beec856a4> ret_from_fork+0x10/0x18
<ffffffffffffffff> 0xffffffffffffffff

Thread-19       D 7542.719029 2888 24823 5064 0x1404840 0x1000008 24235 438599754021693
<ffffff8beec866b4> __switch_to+0x134/0x150
<ffffff8befb838cc> __schedule+0xd5c/0x1100
<ffffff8befb83ce0> schedule+0x70/0x90
<ffffff8beee18258> try_to_free_pages+0x264/0x4b0
<ffffff8beee06978> __alloc_pages_nodemask+0x7a4/0x10d0
<ffffff8beefac784> fuse_copy_fill+0x15c/0x210
<ffffff8beefabbcc> fuse_dev_do_read+0x434/0xc24
<ffffff8beefab56c> fuse_dev_splice_read+0x84/0x1d8
<ffffff8beeeb5788> SyS_splice+0x67c/0x8bc
<ffffff8beec83fc0> el0_svc_naked+0x34/0x38
<ffffffffffffffff> 0xffffffffffffffff

code snippet:
static bool throttle_direct_reclaim(...)
{
...
	/*
	 * If the caller cannot enter the filesystem, it's possible that it
	 * is due to the caller holding an FS lock or performing a journal
	 * transaction in the case of a filesystem like ext[3|4]. In this case,
	 * it is not safe to block on pfmemalloc_wait as kswapd could be
	 * blocked waiting on the same lock. Instead, throttle for up to a
	 * second before continuing.
	 */
	if (!(gfp_mask & __GFP_FS)) {
		wait_event_interruptible_timeout(pgdat->pfmemalloc_wait,
			allow_direct_reclaim(pgdat), HZ);

		goto check_pending;
	}

	/* Throttle until kswapd wakes the process */
	wait_event_killable(zone->zone_pgdat->pfmemalloc_wait,
		allow_direct_reclaim(pgdat));
...
}

Thanks,
yanwu

On Wed, 24 Mar 2021 16:28:35 +0100 Miklos Szeredi via <miklos@szeredi.hu> wrote:
> On what kernel are you seeing this?

> I don't see how it can happen on upstream kernels, since there's a
>"write_inode_now(inode, 1)" call in fuse_release() and nothing can
> dirty the inode after the file has been released.

> Thanks,
> Miklos

>On Tue, Feb 2, 2021 at 5:41 AM Huang Jianan via fuse-devel
><fuse-devel@lists.sourceforge.net> wrote:
>>
>> We found the following deadlock situations in low memory scenarios:
>> Thread A                         Thread B
>> - __writeback_single_inode
>>  - fuse_write_inode
>>   - fuse_simple_request
>>    - __fuse_request_send
>>     - request_wait_answer
>>                                  - fuse_dev_splice_read
>>                                   - fuse_copy_fill
>>                                    - __alloc_pages_direct_reclaim
>>                                     - do_shrink_slab
>>                                      - super_cache_scan
>>                                       - shrink_dentry_list
>>                                        - dentry_unlink_inode
>>                                         - iput_final
>>                                          - inode_wait_for_writeback




  reply	other threads:[~2022-03-10 11:10 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20210202040830.26043-1-huangjianan@oppo.com>
2021-03-24 15:28 ` [fuse-devel] [PATCH] fuse: avoid deadlock when write fuse inode Miklos Szeredi
2022-03-10 11:10   ` Rokudo Yan [this message]
2022-04-25 13:15     ` Miklos Szeredi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220310111026.684924-1-wu-yan@tcl.com \
    --to=wu-yan@tcl.com \
    --cc=Ed.Tsai@mediatek.com \
    --cc=guoweichao@oppo.com \
    --cc=huangjianan@oppo.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=miklos@szeredi.hu \
    --cc=zhangshiming@oppo.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).