linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Anshuman Khandual <anshuman.khandual@arm.com>
To: Roman Gushchin <guro@fb.com>, Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	kernel-team@fb.com, Johannes Weiner <hannes@cmpxchg.org>,
	Matthew Wilcox <willy@infradead.org>,
	Vlastimil Babka <vbabka@suse.cz>
Subject: Re: [PATCH] mm: refactor __vunmap() to avoid duplicated call to find_vm_area()
Date: Wed, 15 May 2019 13:11:46 +0530	[thread overview]
Message-ID: <7ad2b16d-c1a3-b826-df4d-6d9ed1d9fc9f@arm.com> (raw)
In-Reply-To: <20190514235111.2817276-1-guro@fb.com>



On 05/15/2019 05:21 AM, Roman Gushchin wrote:
> __vunmap() calls find_vm_area() twice without an obvious reason:
> first directly to get the area pointer, second indirectly by calling
> vm_remove_mappings()->remove_vm_area(), which is again searching
> for the area.
> 
> To remove this redundancy, let's split remove_vm_area() into
> __remove_vm_area(struct vmap_area *), which performs the actual area
> removal, and remove_vm_area(const void *addr) wrapper, which can
> be used everywhere, where it has been used before. Let's pass
> a pointer to the vm_area instead of vm_struct to vm_remove_mappings(),
> so it can pass it to __remove_vm_area() and avoid the redundant area
> lookup.
> 
> On my test setup, I've got 5-10% speed up on vfree()'ing 1000000
> of 4-pages vmalloc blocks.
> 
> Perf report before:
>   29.44%  cat      [kernel.kallsyms]  [k] free_unref_page
>   11.88%  cat      [kernel.kallsyms]  [k] find_vmap_area
>    9.28%  cat      [kernel.kallsyms]  [k] __free_pages
>    7.44%  cat      [kernel.kallsyms]  [k] __slab_free
>    7.28%  cat      [kernel.kallsyms]  [k] vunmap_page_range
>    4.56%  cat      [kernel.kallsyms]  [k] __vunmap
>    3.64%  cat      [kernel.kallsyms]  [k] __purge_vmap_area_lazy
>    3.04%  cat      [kernel.kallsyms]  [k] __free_vmap_area
> 
> Perf report after:
>   32.41%  cat      [kernel.kallsyms]  [k] free_unref_page
>    7.79%  cat      [kernel.kallsyms]  [k] find_vmap_area
>    7.40%  cat      [kernel.kallsyms]  [k] __slab_free
>    7.31%  cat      [kernel.kallsyms]  [k] vunmap_page_range
>    6.84%  cat      [kernel.kallsyms]  [k] __free_pages
>    6.01%  cat      [kernel.kallsyms]  [k] __vunmap
>    3.98%  cat      [kernel.kallsyms]  [k] smp_call_function_single
>    3.81%  cat      [kernel.kallsyms]  [k] __purge_vmap_area_lazy
>    2.77%  cat      [kernel.kallsyms]  [k] __free_vmap_area
> 
> Signed-off-by: Roman Gushchin <guro@fb.com>
> Cc: Johannes Weiner <hannes@cmpxchg.org>
> Cc: Matthew Wilcox <willy@infradead.org>
> Cc: Vlastimil Babka <vbabka@suse.cz>
> ---
>  mm/vmalloc.c | 52 +++++++++++++++++++++++++++++-----------------------
>  1 file changed, 29 insertions(+), 23 deletions(-)
> 
> diff --git a/mm/vmalloc.c b/mm/vmalloc.c
> index c42872ed82ac..8d4907865614 100644
> --- a/mm/vmalloc.c
> +++ b/mm/vmalloc.c
> @@ -2075,6 +2075,22 @@ struct vm_struct *find_vm_area(const void *addr)
>  	return NULL;
>  }
>  
> +static struct vm_struct *__remove_vm_area(struct vmap_area *va)
> +{
> +	struct vm_struct *vm = va->vm;
> +
> +	spin_lock(&vmap_area_lock);
> +	va->vm = NULL;
> +	va->flags &= ~VM_VM_AREA;
> +	va->flags |= VM_LAZY_FREE;
> +	spin_unlock(&vmap_area_lock);
> +
> +	kasan_free_shadow(vm);
> +	free_unmap_vmap_area(va);
> +
> +	return vm;
> +}
> +
>  /**
>   * remove_vm_area - find and remove a continuous kernel virtual area
>   * @addr:	    base address
> @@ -2087,26 +2103,14 @@ struct vm_struct *find_vm_area(const void *addr)
>   */
>  struct vm_struct *remove_vm_area(const void *addr)
>  {
> +	struct vm_struct *vm = NULL;
>  	struct vmap_area *va;
>  
> -	might_sleep();

Is not this necessary any more ?

> -
>  	va = find_vmap_area((unsigned long)addr);
> -	if (va && va->flags & VM_VM_AREA) {
> -		struct vm_struct *vm = va->vm;
> -
> -		spin_lock(&vmap_area_lock);
> -		va->vm = NULL;
> -		va->flags &= ~VM_VM_AREA;
> -		va->flags |= VM_LAZY_FREE;
> -		spin_unlock(&vmap_area_lock);
> -
> -		kasan_free_shadow(vm);
> -		free_unmap_vmap_area(va);
> +	if (va && va->flags & VM_VM_AREA)
> +		vm = __remove_vm_area(va);
>  
> -		return vm;
> -	}
> -	return NULL;
> +	return vm;
>  }

Other callers of remove_vm_area() cannot use __remove_vm_area() directly as well
to save a look up ?


  parent reply	other threads:[~2019-05-15  7:41 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-14 23:51 [PATCH] mm: refactor __vunmap() to avoid duplicated call to find_vm_area() Roman Gushchin
2019-05-14 23:51 ` [PATCH RESEND] mm: show number of vmalloc pages in /proc/meminfo Roman Gushchin
2019-05-15  7:14   ` Anshuman Khandual
2019-07-09  5:59   ` Minchan Kim
2019-07-10  1:31     ` Roman Gushchin
2019-05-15  4:27 ` [PATCH] mm: refactor __vunmap() to avoid duplicated call to find_vm_area() Anshuman Khandual
2019-05-15 17:18   ` Roman Gushchin
2019-05-15  7:41 ` Anshuman Khandual [this message]
2019-05-15 17:17   ` Roman Gushchin
2019-05-15 17:35 ` Ira Weiny
2019-05-15 17:45   ` Roman Gushchin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7ad2b16d-c1a3-b826-df4d-6d9ed1d9fc9f@arm.com \
    --to=anshuman.khandual@arm.com \
    --cc=akpm@linux-foundation.org \
    --cc=guro@fb.com \
    --cc=hannes@cmpxchg.org \
    --cc=kernel-team@fb.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=vbabka@suse.cz \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).