From: Qian Cai <cai@lca.pw>
To: Yang Shi <yang.shi@linux.alibaba.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
Andrew Morton <akpm@linux-foundation.org>,
Linux MM <linux-mm@kvack.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: list corruption in deferred_split_scan()
Date: Mon, 15 Jul 2019 21:36:17 -0400 [thread overview]
Message-ID: <8A64D551-FF5B-4068-853E-9E31AF323517@lca.pw> (raw)
In-Reply-To: <5c853e6e-6367-d83c-bb97-97cd67320126@linux.alibaba.com>
> On Jul 15, 2019, at 8:22 PM, Yang Shi <yang.shi@linux.alibaba.com> wrote:
>
>
>
> On 7/15/19 2:23 PM, Qian Cai wrote:
>> On Fri, 2019-07-12 at 12:12 -0700, Yang Shi wrote:
>>>> Another possible lead is that without reverting the those commits below,
>>>> kdump
>>>> kernel would always also crash in shrink_slab_memcg() at this line,
>>>>
>>>> map = rcu_dereference_protected(memcg->nodeinfo[nid]->shrinker_map, true);
>>> This looks a little bit weird. It seems nodeinfo[nid] is NULL? I didn't
>>> think of where nodeinfo was freed but memcg was still online. Maybe a
>>> check is needed:
>> Actually, "memcg" is NULL.
>
> It sounds weird. shrink_slab() is called in mem_cgroup_iter which does pin the memcg. So, the memcg should not go away.
Well, the commit “mm: shrinker: make shrinker not depend on memcg kmem” changed this line in shrink_slab_memcg(),
- if (!memcg_kmem_enabled() || !mem_cgroup_online(memcg))
+ if (!mem_cgroup_online(memcg))
return 0;
Since the kdump kernel has the parameter “cgroup_disable=memory”, shrink_slab_memcg() will no longer be able to handle NULL memcg from mem_cgroup_iter() as,
if (mem_cgroup_disabled())
return NULL;
>
>>
>>> diff --git a/mm/vmscan.c b/mm/vmscan.c
>>> index a0301ed..bacda49 100644
>>> --- a/mm/vmscan.c
>>> +++ b/mm/vmscan.c
>>> @@ -602,6 +602,9 @@ static unsigned long shrink_slab_memcg(gfp_t
>>> gfp_mask, int nid,
>>> if (!mem_cgroup_online(memcg))
>>> return 0;
>>>
>>> + if (!memcg->nodeinfo[nid])
>>> + return 0;
>>> +
>>> if (!down_read_trylock(&shrinker_rwsem))
>>> return 0;
>>>
>>>> [ 9.072036][ T1] BUG: KASAN: null-ptr-deref in shrink_slab+0x111/0x440
>>>> [ 9.072036][ T1] Read of size 8 at addr 0000000000000dc8 by task
>>>> swapper/0/1
>>>> [ 9.072036][ T1]
>>>> [ 9.072036][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.0-next-
>>>> 20190711+ #10
>>>> [ 9.072036][ T1] Hardware name: HPE ProLiant DL385 Gen10/ProLiant
>>>> DL385
>>>> Gen10, BIOS A40 01/25/2019
>>>> [ 9.072036][ T1] Call Trace:
>>>> [ 9.072036][ T1] dump_stack+0x62/0x9a
>>>> [ 9.072036][ T1] __kasan_report.cold.4+0xb0/0xb4
>>>> [ 9.072036][ T1] ? unwind_get_return_address+0x40/0x50
>>>> [ 9.072036][ T1] ? shrink_slab+0x111/0x440
>>>> [ 9.072036][ T1] kasan_report+0xc/0xe
>>>> [ 9.072036][ T1] __asan_load8+0x71/0xa0
>>>> [ 9.072036][ T1] shrink_slab+0x111/0x440
>>>> [ 9.072036][ T1] ? mem_cgroup_iter+0x98/0x840
>>>> [ 9.072036][ T1] ? unregister_shrinker+0x110/0x110
>>>> [ 9.072036][ T1] ? kasan_check_read+0x11/0x20
>>>> [ 9.072036][ T1] ? mem_cgroup_protected+0x39/0x260
>>>> [ 9.072036][ T1] shrink_node+0x31e/0xa30
>>>> [ 9.072036][ T1] ? shrink_node_memcg+0x1560/0x1560
>>>> [ 9.072036][ T1] ? ktime_get+0x93/0x110
>>>> [ 9.072036][ T1] do_try_to_free_pages+0x22f/0x820
>>>> [ 9.072036][ T1] ? shrink_node+0xa30/0xa30
>>>> [ 9.072036][ T1] ? kasan_check_read+0x11/0x20
>>>> [ 9.072036][ T1] ? check_chain_key+0x1df/0x2e0
>>>> [ 9.072036][ T1] try_to_free_pages+0x242/0x4d0
>>>> [ 9.072036][ T1] ? do_try_to_free_pages+0x820/0x820
>>>> [ 9.072036][ T1] __alloc_pages_nodemask+0x9ce/0x1bc0
>>>> [ 9.072036][ T1] ? gfp_pfmemalloc_allowed+0xc0/0xc0
>>>> [ 9.072036][ T1] ? unwind_dump+0x260/0x260
>>>> [ 9.072036][ T1] ? kernel_text_address+0x33/0xc0
>>>> [ 9.072036][ T1] ? arch_stack_walk+0x8f/0xf0
>>>> [ 9.072036][ T1] ? ret_from_fork+0x22/0x40
>>>> [ 9.072036][ T1] alloc_page_interleave+0x18/0x130
>>>> [ 9.072036][ T1] alloc_pages_current+0xf6/0x110
>>>> [ 9.072036][ T1] allocate_slab+0x600/0x11f0
>>>> [ 9.072036][ T1] new_slab+0x46/0x70
>>>> [ 9.072036][ T1] ___slab_alloc+0x5d4/0x9c0
>>>> [ 9.072036][ T1] ? create_object+0x3a/0x3e0
>>>> [ 9.072036][ T1] ? fs_reclaim_acquire.part.15+0x5/0x30
>>>> [ 9.072036][ T1] ? ___might_sleep+0xab/0xc0
>>>> [ 9.072036][ T1] ? create_object+0x3a/0x3e0
>>>> [ 9.072036][ T1] __slab_alloc+0x12/0x20
>>>> [ 9.072036][ T1] ? __slab_alloc+0x12/0x20
>>>> [ 9.072036][ T1] kmem_cache_alloc+0x32a/0x400
>>>> [ 9.072036][ T1] create_object+0x3a/0x3e0
>>>> [ 9.072036][ T1] kmemleak_alloc+0x71/0xa0
>>>> [ 9.072036][ T1] kmem_cache_alloc+0x272/0x400
>>>> [ 9.072036][ T1] ? kasan_check_read+0x11/0x20
>>>> [ 9.072036][ T1] ? do_raw_spin_unlock+0xa8/0x140
>>>> [ 9.072036][ T1] acpi_ps_alloc_op+0x76/0x122
>>>> [ 9.072036][ T1] acpi_ds_execute_arguments+0x2f/0x18d
>>>> [ 9.072036][ T1] acpi_ds_get_package_arguments+0x7d/0x84
>>>> [ 9.072036][ T1] acpi_ns_init_one_package+0x33/0x61
>>>> [ 9.072036][ T1] acpi_ns_init_one_object+0xfc/0x189
>>>> [ 9.072036][ T1] acpi_ns_walk_namespace+0x114/0x1f2
>>>> [ 9.072036][ T1] ? acpi_ns_init_one_package+0x61/0x61
>>>> [ 9.072036][ T1] ? acpi_ns_init_one_package+0x61/0x61
>>>> [ 9.072036][ T1] acpi_walk_namespace+0x9e/0xcb
>>>> [ 9.072036][ T1] ? acpi_sleep_proc_init+0x36/0x36
>>>> [ 9.072036][ T1] acpi_ns_initialize_objects+0x99/0xed
>>>> [ 9.072036][ T1] ? acpi_ns_find_ini_methods+0xa2/0xa2
>>>> [ 9.072036][ T1] ? acpi_tb_load_namespace+0x2dc/0x2eb
>>>> [ 9.072036][ T1] acpi_load_tables+0x61/0x80
>>>> [ 9.072036][ T1] acpi_init+0x10d/0x44b
>>>> [ 9.072036][ T1] ? acpi_sleep_proc_init+0x36/0x36
>>>> [ 9.072036][ T1] ? bus_uevent_filter+0x16/0x30
>>>> [ 9.072036][ T1] ? kobject_uevent_env+0x109/0x980
>>>> [ 9.072036][ T1] ? kernfs_get+0x13/0x20
>>>> [ 9.072036][ T1] ? kobject_uevent+0xb/0x10
>>>> [ 9.072036][ T1] ? kset_register+0x31/0x50
>>>> [ 9.072036][ T1] ? kset_create_and_add+0x9f/0xd0
>>>> [ 9.072036][ T1] ? acpi_sleep_proc_init+0x36/0x36
>>>> [ 9.072036][ T1] do_one_initcall+0xfe/0x45a
>>>> [ 9.072036][ T1] ? initcall_blacklisted+0x150/0x150
>>>> [ 9.072036][ T1] ? rwsem_down_read_slowpath+0x930/0x930
>>>> [ 9.072036][ T1] ? kasan_check_write+0x14/0x20
>>>> [ 9.072036][ T1] ? up_write+0x6b/0x190
>>>> [ 9.072036][ T1] kernel_init_freeable+0x614/0x6a7
>>>> [ 9.072036][ T1] ? rest_init+0x188/0x188
>>>> [ 9.072036][ T1] kernel_init+0x11/0x138
>>>> [ 9.072036][ T1] ? rest_init+0x188/0x188
>>>> [ 9.072036][ T1] ret_from_fork+0x22/0x40
>>>> [ 9.072036][ T1]
>>>> ==================================================================
>>>> [ 9.072036][ T1] Disabling lock debugging due to kernel taint
>>>> [ 9.145712][ T1] BUG: kernel NULL pointer dereference, address:
>>>> 0000000000000dc8
>>>> [ 9.152036][ T1] #PF: supervisor read access in kernel mode
>>>> [ 9.152036][ T1] #PF: error_code(0x0000) - not-present page
>>>> [ 9.152036][ T1] PGD 0 P4D 0
>>>> [ 9.152036][ T1] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
>>>> [ 9.152036][ T1] CPU: 0 PID: 1 Comm: swapper/0 Tainted:
>>>> G B 5.2.0-next-20190711+ #10
>>>> [ 9.152036][ T1] Hardware name: HPE ProLiant DL385 Gen10/ProLiant
>>>> DL385
>>>> Gen10, BIOS A40 01/25/2019
>>>> [ 9.152036][ T1] RIP: 0010:shrink_slab+0x111/0x440
>>>> [ 9.152036][ T1] Code: c7 20 8d 44 82 e8 7f 8b e8 ff 85 c0 0f 84 e2 02
>>>> 00
>>>> 00 4c 63 a5 4c ff ff ff 49 81 c4 b8 01 00 00 4b 8d 7c e6 08 e8 3f 07 0e 00
>>>> <4f>
>>>> 8b 64 e6 08 49 8d bc 24 20 03 00 00 e8 2d 07 0e 00 49 8b 84 24
>>>> [ 9.152036][ T1] RSP: 0018:ffff88905757f100 EFLAGS: 00010282
>>>> [ 9.152036][ T1] RAX: 0000000000000000 RBX: ffff88905757f1b0 RCX:
>>>> ffffffff8112f288
>>>> [ 9.152036][ T1] RDX: 1ffffffff049c088 RSI: dffffc0000000000 RDI:
>>>> ffffffff824e0440
>>>> [ 9.152036][ T1] RBP: ffff88905757f1d8 R08: fffffbfff049c089 R09:
>>>> fffffbfff049c088
>>>> [ 9.152036][ T1] R10: fffffbfff049c088 R11: ffffffff824e0443 R12:
>>>> 00000000000001b8
>>>> [ 9.152036][ T1] R13: 0000000000000000 R14: 0000000000000000 R15:
>>>> ffff88905757f440
>>>> [ 9.152036][ T1] FS: 0000000000000000(0000) GS:ffff889062800000(0000)
>>>> knlGS:0000000000000000
>>>> [ 9.152036][ T1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>> [ 9.152036][ T1] CR2: 0000000000000dc8 CR3: 0000001070212000 CR4:
>>>> 00000000001406b0
>>>> [ 9.152036][ T1] Call Trace:
>>>> [ 9.152036][ T1] ? mem_cgroup_iter+0x98/0x840
>>>> [ 9.152036][ T1] ? unregister_shrinker+0x110/0x110
>>>> [ 9.152036][ T1] ? kasan_check_read+0x11/0x20
>>>> [ 9.152036][ T1] ? mem_cgroup_protected+0x39/0x260
>>>> [ 9.152036][ T1] shrink_node+0x31e/0xa30
>>>> [ 9.152036][ T1] ? shrink_node_memcg+0x1560/0x1560
>>>> [ 9.152036][ T1] ? ktime_get+0x93/0x110
>>>> [ 9.152036][ T1] do_try_to_free_pages+0x22f/0x820
>>>> [ 9.152036][ T1] ? shrink_node+0xa30/0xa30
>>>> [ 9.152036][ T1] ? kasan_check_read+0x11/0x20
>>>> [ 9.152036][ T1] ? check_chain_key+0x1df/0x2e0
>>>> [ 9.152036][ T1] try_to_free_pages+0x242/0x4d0
>>>> [ 9.152036][ T1] ? do_try_to_free_pages+0x820/0x820
>>>> [ 9.152036][ T1] __alloc_pages_nodemask+0x9ce/0x1bc0
>>>> [ 9.152036][ T1] ? gfp_pfmemalloc_allowed+0xc0/0xc0
>>>> [ 9.152036][ T1] ? unwind_dump+0x260/0x260
>>>> [ 9.152036][ T1] ? kernel_text_address+0x33/0xc0
>>>> [ 9.152036][ T1] ? arch_stack_walk+0x8f/0xf0
>>>> [ 9.152036][ T1] ? ret_from_fork+0x22/0x40
>>>> [ 9.152036][ T1] alloc_page_interleave+0x18/0x130
>>>> [ 9.152036][ T1] alloc_pages_current+0xf6/0x110
>>>> [ 9.152036][ T1] allocate_slab+0x600/0x11f0
>>>> [ 9.152036][ T1] new_slab+0x46/0x70
>>>> [ 9.152036][ T1] ___slab_alloc+0x5d4/0x9c0
>>>> [ 9.152036][ T1] ? create_object+0x3a/0x3e0
>>>> [ 9.152036][ T1] ? fs_reclaim_acquire.part.15+0x5/0x30
>>>> [ 9.152036][ T1] ? ___might_sleep+0xab/0xc0
>>>> [ 9.152036][ T1] ? create_object+0x3a/0x3e0
>>>> [ 9.152036][ T1] __slab_alloc+0x12/0x20
>>>> [ 9.152036][ T1] ? __slab_alloc+0x12/0x20
>>>> [ 9.152036][ T1] kmem_cache_alloc+0x32a/0x400
>>>> [ 9.152036][ T1] create_object+0x3a/0x3e0
>>>> [ 9.152036][ T1] kmemleak_alloc+0x71/0xa0
>>>> [ 9.152036][ T1] kmem_cache_alloc+0x272/0x400
>>>> [ 9.152036][ T1] ? kasan_check_read+0x11/0x20
>>>> [ 9.152036][ T1] ? do_raw_spin_unlock+0xa8/0x140
>>>> [ 9.152036][ T1] acpi_ps_alloc_op+0x76/0x122
>>>> [ 9.152036][ T1] acpi_ds_execute_arguments+0x2f/0x18d
>>>> [ 9.152036][ T1] acpi_ds_get_package_arguments+0x7d/0x84
>>>> [ 9.152036][ T1] acpi_ns_init_one_package+0x33/0x61
>>>> [ 9.152036][ T1] acpi_ns_init_one_object+0xfc/0x189
>>>> [ 9.152036][ T1] acpi_ns_walk_namespace+0x114/0x1f2
>>>> [ 9.152036][ T1] ? acpi_ns_init_one_package+0x61/0x61
>>>> [ 9.152036][ T1] ? acpi_ns_init_one_package+0x61/0x61
>>>> [ 9.152036][ T1] acpi_walk_namespace+0x9e/0xcb
>>>> [ 9.152036][ T1] ? acpi_sleep_proc_init+0x36/0x36
>>>> [ 9.152036][ T1] acpi_ns_initialize_objects+0x99/0xed
>>>> [ 9.152036][ T1] ? acpi_ns_find_ini_methods+0xa2/0xa2
>>>> [ 9.152036][ T1] ? acpi_tb_load_namespace+0x2dc/0x2eb
>>>> [ 9.152036][ T1] acpi_load_tables+0x61/0x80
>>>> [ 9.152036][ T1] acpi_init+0x10d/0x44b
>>>> [ 9.152036][ T1] ? acpi_sleep_proc_init+0x36/0x36
>>>> [ 9.152036][ T1] ? bus_uevent_filter+0x16/0x30
>>>> [ 9.152036][ T1] ? kobject_uevent_env+0x109/0x980
>>>> [ 9.152036][ T1] ? kernfs_get+0x13/0x20
>>>> [ 9.152036][ T1] ? kobject_uevent+0xb/0x10
>>>> [ 9.152036][ T1] ? kset_register+0x31/0x50
>>>> [ 9.152036][ T1] ? kset_create_and_add+0x9f/0xd0
>>>> [ 9.152036][ T1] ? acpi_sleep_proc_init+0x36/0x36
>>>> [ 9.152036][ T1] do_one_initcall+0xfe/0x45a
>>>> [ 9.152036][ T1] ? initcall_blacklisted+0x150/0x150
>>>> [ 9.152036][ T1] ? rwsem_down_read_slowpath+0x930/0x930
>>>> [ 9.152036][ T1] ? kasan_check_write+0x14/0x20
>>>> [ 9.152036][ T1] ? up_write+0x6b/0x190
>>>> [ 9.152036][ T1] kernel_init_freeable+0x614/0x6a7
>>>> [ 9.152036][ T1] ? rest_init+0x188/0x188
>>>> [ 9.152036][ T1] kernel_init+0x11/0x138
>>>> [ 9.152036][ T1] ? rest_init+0x188/0x188
>>>> [ 9.152036][ T1] ret_from_fork+0x22/0x40
>>>> [ 9.152036][ T1] Modules linked in:
>>>> [ 9.152036][ T1] CR2: 0000000000000dc8
>>>> [ 9.152036][ T1] ---[ end trace 568acce4eca01945 ]---
>>>> [ 9.152036][ T1] RIP: 0010:shrink_slab+0x111/0x440
>>>> [ 9.152036][ T1] Code: c7 20 8d 44 82 e8 7f 8b e8 ff 85 c0 0f 84 e2 02
>>>> 00
>>>> 00 4c 63 a5 4c ff ff ff 49 81 c4 b8 01 00 00 4b 8d 7c e6 08 e8 3f 07 0e 00
>>>> <4f>
>>>> 8b 64 e6 08 49 8d bc 24 20 03 00 00 e8 2d 07 0e 00 49 8b 84 24
>>>> [ 9.152036][ T1] RSP: 0018:ffff88905757f100 EFLAGS: 00010282
>>>> [ 9.152036][ T1] RAX: 0000000000000000 RBX: ffff88905757f1b0 RCX:
>>>> ffffffff8112f288
>>>> [ 9.152036][ T1] RDX: 1ffffffff049c088 RSI: dffffc0000000000 RDI:
>>>> ffffffff824e0440
>>>> [ 9.152036][ T1] RBP: ffff88905757f1d8 R08: fffffbfff049c089 R09:
>>>> fffffbfff049c088
>>>> [ 9.152036][ T1] R10: fffffbfff049c088 R11: ffffffff824e0443 R12:
>>>> 00000000000001b8
>>>> [ 9.152036][ T1] R13: 0000000000000000 R14: 0000000000000000 R15:
>>>> ffff88905757f440
>>>> [ 9.152036][ T1] FS: 0000000000000000(0000) GS:ffff889062800000(0000)
>>>> knlGS:00000000
>>>>
>
next prev parent reply other threads:[~2019-07-16 1:36 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-10 21:43 list corruption in deferred_split_scan() Qian Cai
2019-07-11 0:16 ` Yang Shi
2019-07-11 21:07 ` Qian Cai
2019-07-12 19:12 ` Yang Shi
2019-07-13 4:41 ` Yang Shi
2019-07-15 21:23 ` Qian Cai
2019-07-16 0:22 ` Yang Shi
2019-07-16 1:36 ` Qian Cai [this message]
2019-07-16 3:00 ` Yang Shi
2019-07-16 23:36 ` Shakeel Butt
2019-07-17 0:12 ` Yang Shi
2019-07-17 17:02 ` Shakeel Butt
2019-07-17 17:09 ` Yang Shi
2019-07-19 0:54 ` Qian Cai
2019-07-19 0:59 ` Yang Shi
2019-07-24 18:10 ` Qian Cai
2019-07-14 3:53 ` Hillf Danton
2019-07-15 4:52 ` Yang Shi
2019-07-24 21:13 ` Qian Cai
2019-07-25 21:46 ` Yang Shi
2019-08-05 22:15 ` Yang Shi
2019-08-06 1:05 ` Qian Cai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8A64D551-FF5B-4068-853E-9E31AF323517@lca.pw \
--to=cai@lca.pw \
--cc=akpm@linux-foundation.org \
--cc=kirill.shutemov@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=yang.shi@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).