Linux-mm Archive on lore.kernel.org
 help / color / Atom feed
From: Damien Le Moal <Damien.LeMoal@wdc.com>
To: Mike Christie <mchristi@redhat.com>,
	"mhocko@kernel.org" <mhocko@kernel.org>,
	"david@fromorbit.com" <david@fromorbit.com>,
	"linux-mm@kvack.org" <linux-mm@kvack.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-scsi@vger.kernel.org" <linux-scsi@vger.kernel.org>,
	"linux-fsdevel@vger.kernel.org" <linux-fsdevel@vger.kernel.org>,
	"linux-block@vger.kernel.org" <linux-block@vger.kernel.org>,
	"martin@urbackup.org" <martin@urbackup.org>,
	Masato Suzuki <masato.suzuki@wdc.com>
Subject: Re: [PATCH] Add prctl support for controlling mem reclaim V3
Date: Sat, 9 Nov 2019 02:09:00 +0000
Message-ID: <BYAPR04MB5816B6F0A0448F141DE8AD54E77A0@BYAPR04MB5816.namprd04.prod.outlook.com> (raw)
In-Reply-To: <20191108185319.9326-1-mchristi@redhat.com>

On 2019/11/09 3:53, Mike Christie wrote:
> There are several storage drivers like dm-multipath, iscsi, tcmu-runner,
> amd nbd that have userspace components that can run in the IO path. For
> example, iscsi and nbd's userspace deamons may need to recreate a socket
> and/or send IO on it, and dm-multipath's daemon multipathd may need to
> send SG IO or read/write IO to figure out the state of paths and re-set
> them up.
> 
> In the kernel these drivers have access to GFP_NOIO/GFP_NOFS and the
> memalloc_*_save/restore functions to control the allocation behavior,
> but for userspace we would end up hitting an allocation that ended up
> writing data back to the same device we are trying to allocate for.
> The device is then in a state of deadlock, because to execute IO the
> device needs to allocate memory, but to allocate memory the memory
> layers want execute IO to the device.
> 
> Here is an example with nbd using a local userspace daemon that performs
> network IO to a remote server. We are using XFS on top of the nbd device,
> but it can happen with any FS or other modules layered on top of the nbd
> device that can write out data to free memory.  Here a nbd daemon helper
> thread, msgr-worker-1, is performing a write/sendmsg on a socket to execute
> a request. This kicks off a reclaim operation which results in a WRITE to
> the nbd device and the nbd thread calling back into the mm layer.
> 
> [ 1626.609191] msgr-worker-1   D    0  1026      1 0x00004000
> [ 1626.609193] Call Trace:
> [ 1626.609195]  ? __schedule+0x29b/0x630
> [ 1626.609197]  ? wait_for_completion+0xe0/0x170
> [ 1626.609198]  schedule+0x30/0xb0
> [ 1626.609200]  schedule_timeout+0x1f6/0x2f0
> [ 1626.609202]  ? blk_finish_plug+0x21/0x2e
> [ 1626.609204]  ? _xfs_buf_ioapply+0x2e6/0x410
> [ 1626.609206]  ? wait_for_completion+0xe0/0x170
> [ 1626.609208]  wait_for_completion+0x108/0x170
> [ 1626.609210]  ? wake_up_q+0x70/0x70
> [ 1626.609212]  ? __xfs_buf_submit+0x12e/0x250
> [ 1626.609214]  ? xfs_bwrite+0x25/0x60
> [ 1626.609215]  xfs_buf_iowait+0x22/0xf0
> [ 1626.609218]  __xfs_buf_submit+0x12e/0x250
> [ 1626.609220]  xfs_bwrite+0x25/0x60
> [ 1626.609222]  xfs_reclaim_inode+0x2e8/0x310
> [ 1626.609224]  xfs_reclaim_inodes_ag+0x1b6/0x300
> [ 1626.609227]  xfs_reclaim_inodes_nr+0x31/0x40
> [ 1626.609228]  super_cache_scan+0x152/0x1a0
> [ 1626.609231]  do_shrink_slab+0x12c/0x2d0
> [ 1626.609233]  shrink_slab+0x9c/0x2a0
> [ 1626.609235]  shrink_node+0xd7/0x470
> [ 1626.609237]  do_try_to_free_pages+0xbf/0x380
> [ 1626.609240]  try_to_free_pages+0xd9/0x1f0
> [ 1626.609245]  __alloc_pages_slowpath+0x3a4/0xd30
> [ 1626.609251]  ? ___slab_alloc+0x238/0x560
> [ 1626.609254]  __alloc_pages_nodemask+0x30c/0x350
> [ 1626.609259]  skb_page_frag_refill+0x97/0xd0
> [ 1626.609274]  sk_page_frag_refill+0x1d/0x80
> [ 1626.609279]  tcp_sendmsg_locked+0x2bb/0xdd0
> [ 1626.609304]  tcp_sendmsg+0x27/0x40
> [ 1626.609307]  sock_sendmsg+0x54/0x60
> [ 1626.609308]  ___sys_sendmsg+0x29f/0x320
> [ 1626.609313]  ? sock_poll+0x66/0xb0
> [ 1626.609318]  ? ep_item_poll.isra.15+0x40/0xc0
> [ 1626.609320]  ? ep_send_events_proc+0xe6/0x230
> [ 1626.609322]  ? hrtimer_try_to_cancel+0x54/0xf0
> [ 1626.609324]  ? ep_read_events_proc+0xc0/0xc0
> [ 1626.609326]  ? _raw_write_unlock_irq+0xa/0x20
> [ 1626.609327]  ? ep_scan_ready_list.constprop.19+0x218/0x230
> [ 1626.609329]  ? __hrtimer_init+0xb0/0xb0
> [ 1626.609331]  ? _raw_spin_unlock_irq+0xa/0x20
> [ 1626.609334]  ? ep_poll+0x26c/0x4a0
> [ 1626.609337]  ? tcp_tsq_write.part.54+0xa0/0xa0
> [ 1626.609339]  ? release_sock+0x43/0x90
> [ 1626.609341]  ? _raw_spin_unlock_bh+0xa/0x20
> [ 1626.609342]  __sys_sendmsg+0x47/0x80
> [ 1626.609347]  do_syscall_64+0x5f/0x1c0
> [ 1626.609349]  ? prepare_exit_to_usermode+0x75/0xa0
> [ 1626.609351]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
> 
> This patch adds a new prctl command that daemons can use after they have
> done their initial setup, and before they start to do allocations that
> are in the IO path. It sets the PF_MEMALLOC_NOIO and PF_LESS_THROTTLE
> flags so both userspace block and FS threads can use it to avoid the
> allocation recursion and try to prevent from being throttled while
> writing out data to free up memory.
> 
> Signed-off-by: Mike Christie <mchristi@redhat.com>
> ---
> V3 
> - Drop NOFS, set PF_LESS_THROTTLE and rename prctl flag to reflect it
> is more general and can support both FS and block devices. Both fuse
> and block device daemons, nbd and tcmu-runner, have been tested to
> confirm the more restrictive PF_MEMALLOC_NOIO also works for fuse.
> 
> - Use CAP_SYS_RESOURCE instead of admin.
> 
> V2:
> - Use prctl instead of procfs.
> - Add support for NOFS for fuse.
> - Check permissions.
> 
> 
>  include/uapi/linux/capability.h |  1 +
>  include/uapi/linux/prctl.h      |  4 ++++
>  kernel/sys.c                    | 26 ++++++++++++++++++++++++++
>  3 files changed, 31 insertions(+)
> 
> diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h
> index 240fdb9a60f6..272dc69fa080 100644
> --- a/include/uapi/linux/capability.h
> +++ b/include/uapi/linux/capability.h
> @@ -301,6 +301,7 @@ struct vfs_ns_cap_data {
>  /* Allow more than 64hz interrupts from the real-time clock */
>  /* Override max number of consoles on console allocation */
>  /* Override max number of keymaps */
> +/* Control memory reclaim behavior */
>  
>  #define CAP_SYS_RESOURCE     24
>  
> diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
> index 7da1b37b27aa..07b4f8131e36 100644
> --- a/include/uapi/linux/prctl.h
> +++ b/include/uapi/linux/prctl.h
> @@ -234,4 +234,8 @@ struct prctl_mm_map {
>  #define PR_GET_TAGGED_ADDR_CTRL		56
>  # define PR_TAGGED_ADDR_ENABLE		(1UL << 0)
>  
> +/* Control reclaim behavior when allocating memory */
> +#define PR_SET_IO_FLUSHER		57
> +#define PR_GET_IO_FLUSHER		58
> +
>  #endif /* _LINUX_PRCTL_H */
> diff --git a/kernel/sys.c b/kernel/sys.c
> index a611d1d58c7d..08c6b682fa99 100644
> --- a/kernel/sys.c
> +++ b/kernel/sys.c
> @@ -2486,6 +2486,32 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
>  			return -EINVAL;
>  		error = GET_TAGGED_ADDR_CTRL();
>  		break;
> +	case PR_SET_IO_FLUSHER:
> +		if (!capable(CAP_SYS_RESOURCE))
> +			return -EPERM;
> +
> +		if (arg3 || arg4 || arg5)
> +			return -EINVAL;
> +
> +		if (arg2 == 1)
> +			current->flags |= PF_MEMALLOC_NOIO | PF_LESS_THROTTLE;
> +		else if (!arg2)
> +			current->flags &= ~(PF_MEMALLOC_NOIO | PF_LESS_THROTTLE);
> +		else
> +			return -EINVAL;
> +		break;
> +	case PR_GET_IO_FLUSHER:
> +		if (!capable(CAP_SYS_RESOURCE))
> +			return -EPERM;
> +
> +		if (arg2 || arg3 || arg4 || arg5)
> +			return -EINVAL;
> +
> +		if (current->flags & (PF_MEMALLOC_NOIO | PF_LESS_THROTTLE))
> +			error = 1;
> +		else
> +			error = 0;
> +		break;
>  	default:
>  		error = -EINVAL;
>  		break;
> 

Masato Suzuki in my team tested this with tcmu-runner ZBC file handler.
It solves the memory reclaim recursion deadlock that we have been
observing when this patch is used together with the one I sent yesterday
to the SCSI list (target: core: Prevent memory reclaim recursion).

Sending tested-by tag on behalf of Masato.

Tested-by: Masato Suzuki <masato.suzuki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>


-- 
Damien Le Moal
Western Digital Research


  reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-08 18:53 Mike Christie
2019-11-09  2:09 ` Damien Le Moal [this message]
2019-11-09 19:47 ` Ilya Dryomov
2019-11-11 15:34   ` Michael Christie
2019-11-11  9:32 ` Michal Hocko

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=BYAPR04MB5816B6F0A0448F141DE8AD54E77A0@BYAPR04MB5816.namprd04.prod.outlook.com \
    --to=damien.lemoal@wdc.com \
    --cc=david@fromorbit.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin@urbackup.org \
    --cc=masato.suzuki@wdc.com \
    --cc=mchristi@redhat.com \
    --cc=mhocko@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-mm Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mm/0 linux-mm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mm linux-mm/ https://lore.kernel.org/linux-mm \
		linux-mm@kvack.org
	public-inbox-index linux-mm

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kvack.linux-mm


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git