linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Yang Shi <yang.shi@linux.alibaba.com>
To: Michal Hocko <mhocko@kernel.org>
Cc: mgorman@techsingularity.net, riel@surriel.com,
	hannes@cmpxchg.org, akpm@linux-foundation.org,
	dave.hansen@intel.com, keith.busch@intel.com,
	dan.j.williams@intel.com, fengguang.wu@intel.com,
	fan.du@intel.com, ying.huang@intel.com, ziy@nvidia.com,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [v2 RFC PATCH 0/9] Another Approach to Use PMEM as NUMA Node
Date: Mon, 15 Apr 2019 17:09:07 -0700	[thread overview]
Message-ID: <a68137bb-dcd8-4e4a-b3a9-69a66f9dccaf@linux.alibaba.com> (raw)
In-Reply-To: <20190412084702.GD13373@dhcp22.suse.cz>



On 4/12/19 1:47 AM, Michal Hocko wrote:
> On Thu 11-04-19 11:56:50, Yang Shi wrote:
> [...]
>> Design
>> ======
>> Basically, the approach is aimed to spread data from DRAM (closest to local
>> CPU) down further to PMEM and disk (typically assume the lower tier storage
>> is slower, larger and cheaper than the upper tier) by their hotness.  The
>> patchset tries to achieve this goal by doing memory promotion/demotion via
>> NUMA balancing and memory reclaim as what the below diagram shows:
>>
>>      DRAM <--> PMEM <--> Disk
>>        ^                   ^
>>        |-------------------|
>>                 swap
>>
>> When DRAM has memory pressure, demote pages to PMEM via page reclaim path.
>> Then NUMA balancing will promote pages to DRAM as long as the page is referenced
>> again.  The memory pressure on PMEM node would push the inactive pages of PMEM
>> to disk via swap.
>>
>> The promotion/demotion happens only between "primary" nodes (the nodes have
>> both CPU and memory) and PMEM nodes.  No promotion/demotion between PMEM nodes
>> and promotion from DRAM to PMEM and demotion from PMEM to DRAM.
>>
>> The HMAT is effectively going to enforce "cpu-less" nodes for any memory range
>> that has differentiated performance from the conventional memory pool, or
>> differentiated performance for a specific initiator, per Dan Williams.  So,
>> assuming PMEM nodes are cpuless nodes sounds reasonable.
>>
>> However, cpuless nodes might be not PMEM nodes.  But, actually, memory
>> promotion/demotion doesn't care what kind of memory will be the target nodes,
>> it could be DRAM, PMEM or something else, as long as they are the second tier
>> memory (slower, larger and cheaper than regular DRAM), otherwise it sounds
>> pointless to do such demotion.
>>
>> Defined "N_CPU_MEM" nodemask for the nodes which have both CPU and memory in
>> order to distinguish with cpuless nodes (memory only, i.e. PMEM nodes) and
>> memoryless nodes (some architectures, i.e. Power, may have memoryless nodes).
>> Typically, memory allocation would happen on such nodes by default unless
>> cpuless nodes are specified explicitly, cpuless nodes would be just fallback
>> nodes, so they are also as known as "primary" nodes in this patchset.  With
>> two tier memory system (i.e. DRAM + PMEM), this sounds good enough to
>> demonstrate the promotion/demotion approach for now, and this looks more
>> architecture-independent.  But it may be better to construct such node mask
>> by reading hardware information (i.e. HMAT), particularly for more complex
>> memory hierarchy.
> I still believe you are overcomplicating this without a strong reason.
> Why cannot we start simple and build from there? In other words I do not
> think we really need anything like N_CPU_MEM at all.

In this patchset N_CPU_MEM is used to tell us what nodes are cpuless 
nodes. They would be the preferred demotion target.  Of course, we could 
rely on firmware to just demote to the next best node, but it may be a 
"preferred" node, if so I don't see too much benefit achieved by 
demotion. Am I missing anything?

>
> I would expect that the very first attempt wouldn't do much more than
> migrate to-be-reclaimed pages (without an explicit binding) with a

Do you mean respect mempolicy or cpuset when doing demotion? I was 
wondering this, but I didn't do so in the current implementation since 
it may need walk the rmap to retrieve the mempolicy in the reclaim path. 
Is there any easier way to do so?

> very optimistic allocation strategy (effectivelly GFP_NOWAIT) and if

Yes, this has been done in this patchset.

> that fails then simply give up. All that hooked essentially to the
> node_reclaim path with a new node_reclaim mode so that the behavior
> would be opt-in. This should be the most simplistic way to start AFAICS
> and something people can play with without risking regressions.

I agree it is safer to start with node reclaim. Once it is stable enough 
and we are confident enough, it can be extended to global reclaim.

>
> Once we see how that behaves in the real world and what kind of corner
> case user are able to trigger then we can build on top. E.g. do we want
> to migrate from cpuless nodes as well? I am not really sure TBH. On one
> hand why not if other nodes are free to hold that memory? Swap out is
> more expensive. Anyway this is kind of decision which would rather be
> shaped on an existing experience rather than ad-hoc decistion right now.

I do agree.

>
> I would also not touch the numa balancing logic at this stage and rather
> see how the current implementation behaves.

I agree we would prefer start from something simpler and see how it works.

The "twice access" optimization is aimed to reduce the PMEM bandwidth 
burden since the bandwidth of PMEM is scarce resource. I did compare 
"twice access" to "no twice access", it does save a lot bandwidth for 
some once-off access pattern. For example, when running stress test with 
mmtest's usemem-stress-numa-compact. The kernel would promote ~600,000 
pages with "twice access" in 4 hours, but it would promote ~80,000,000 
pages without "twice access".

Thanks,
Yang



  reply	other threads:[~2019-04-16  0:09 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-11  3:56 [v2 RFC PATCH 0/9] Another Approach to Use PMEM as NUMA Node Yang Shi
2019-04-11  3:56 ` [v2 PATCH 1/9] mm: define N_CPU_MEM node states Yang Shi
2019-04-11  3:56 ` [v2 PATCH 2/9] mm: page_alloc: make find_next_best_node find return cpuless node Yang Shi
2019-04-11  3:56 ` [v2 PATCH 3/9] mm: numa: promote pages to DRAM when it gets accessed twice Yang Shi
2019-04-11  3:56 ` [v2 PATCH 4/9] mm: migrate: make migrate_pages() return nr_succeeded Yang Shi
2019-04-11  3:56 ` [v2 PATCH 5/9] mm: vmscan: demote anon DRAM pages to PMEM node Yang Shi
2019-04-11 14:31   ` Dave Hansen
2019-04-15 22:10     ` Yang Shi
2019-04-15 22:14       ` Dave Hansen
2019-04-15 22:26         ` Yang Shi
2019-04-11  3:56 ` [v2 PATCH 6/9] mm: vmscan: don't demote for memcg reclaim Yang Shi
2019-04-11  3:56 ` [v2 PATCH 7/9] mm: vmscan: check if the demote target node is contended or not Yang Shi
2019-04-11 16:06   ` Dave Hansen
2019-04-15 22:06     ` Yang Shi
2019-04-15 22:13       ` Dave Hansen
2019-04-15 22:23         ` Yang Shi
2019-04-11  3:56 ` [v2 PATCH 8/9] mm: vmscan: add page demotion counter Yang Shi
2019-04-11  3:56 ` [v2 PATCH 9/9] mm: numa: add page promotion counter Yang Shi
2019-04-11 14:28 ` [v2 RFC PATCH 0/9] Another Approach to Use PMEM as NUMA Node Dave Hansen
2019-04-12  8:47 ` Michal Hocko
2019-04-16  0:09   ` Yang Shi [this message]
2019-04-16  7:47     ` Michal Hocko
2019-04-16 14:30       ` Dave Hansen
2019-04-16 14:39         ` Michal Hocko
2019-04-16 15:46           ` Dave Hansen
2019-04-16 18:34             ` Michal Hocko
2019-04-16 15:33         ` Zi Yan
2019-04-16 15:55           ` Dave Hansen
2019-04-16 16:12             ` Zi Yan
2019-04-16 19:19       ` Yang Shi
2019-04-16 21:22         ` Dave Hansen
2019-04-16 21:59           ` Yang Shi
2019-04-16 23:04             ` Dave Hansen
2019-04-16 23:17               ` Yang Shi
2019-04-17 15:13                 ` Keith Busch
2019-04-17  9:23           ` Michal Hocko
2019-04-17 15:23             ` Keith Busch
2019-04-17 15:39               ` Michal Hocko
2019-04-17 15:37                 ` Keith Busch
2019-04-17 16:39                   ` Michal Hocko
2019-04-17 17:26                     ` Yang Shi
2019-04-17 17:29                       ` Keith Busch
2019-04-17 17:51                       ` Michal Hocko
2019-04-18 16:24                         ` Yang Shi
2019-04-17 17:13             ` Dave Hansen
2019-04-17 17:57               ` Michal Hocko
2019-04-18 18:16               ` Keith Busch
2019-04-18 19:23                 ` Yang Shi
2019-04-18 21:07                   ` Zi Yan
2019-04-16 23:18         ` Yang Shi
2019-04-17  9:17         ` Michal Hocko
2019-05-01  6:43           ` Fengguang Wu
2019-04-17 20:43         ` Yang Shi
2019-04-18  9:02           ` Michal Hocko
2019-05-01  5:20             ` Fengguang Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a68137bb-dcd8-4e4a-b3a9-69a66f9dccaf@linux.alibaba.com \
    --to=yang.shi@linux.alibaba.com \
    --cc=akpm@linux-foundation.org \
    --cc=dan.j.williams@intel.com \
    --cc=dave.hansen@intel.com \
    --cc=fan.du@intel.com \
    --cc=fengguang.wu@intel.com \
    --cc=hannes@cmpxchg.org \
    --cc=keith.busch@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mgorman@techsingularity.net \
    --cc=mhocko@kernel.org \
    --cc=riel@surriel.com \
    --cc=ying.huang@intel.com \
    --cc=ziy@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).