linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Julia Lawall <julia.lawall@inria.fr>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>,
	herbert@gondor.apana.org.au,  mripard@kernel.org, wens@csie.org,
	linux-arm-kernel@lists.infradead.org,
	 linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org,
	 Jens Axboe <axboe@kernel.dk>,
	linux-mm@kvack.org,  Andrew Morton <akpm@linuxfoundation.org>
Subject: Re: crypto: sun4i-ss: error with kmap
Date: Sat, 5 Dec 2020 21:16:04 +0100 (CET)	[thread overview]
Message-ID: <alpine.DEB.2.22.394.2012052115430.2754@hadrien> (raw)
In-Reply-To: <87mtys8268.fsf@nanos.tec.linutronix.de>



On Sat, 5 Dec 2020, Thomas Gleixner wrote:

> Corentin,
>
> On Sat, Dec 05 2020 at 19:43, Corentin Labbe wrote:
> > On Fri, Dec 04, 2020 at 09:58:21PM +0100, Thomas Gleixner wrote:
> >> Can you please replace the debug patch with the one below and try again?
> >> That stops the trace right on the condition.
> >
> > Hello, the result could be found at http://kernel.montjoie.ovh/130739.log
>
> Thanks for providing this. This is clearly showing where stuff goes
> wrong. It starts here at 729.550001. I removed the uninteresting parts:
>
> 0d..2 147103293us : __kmap_local_page_prot <-sg_miter_next
> 0d..3 147103308us :__kmap_local_pfn_prot: kmap_local_pfn: 1 ffefd000
>
> 0d..3 147103311us : __kmap_local_page_prot <-sg_miter_next
> 0d..4 147103325us : __kmap_local_pfn_prot: kmap_local_pfn: 3 ffefb000
>
> 0d..3 147103429us : kunmap_local_indexed <-sg_miter_stop
> 0d..4 147103433us : kunmap_local_indexed: kunmap_local: 3 ffefd000
>
> So this maps two pages and unmaps the first one. That's all called from
> sun4i_ss_opti_poll() and the bug is clearly visible there:
>
> 	sg_miter_next(&mi);
> 	sg_miter_next(&mo);
>
> release_ss:
> 	sg_miter_stop(&mi);
> 	sg_miter_stop(&mo);
>
> Written by yourself :) Same issue in sun4i_ss_cipher_poll()
>
> Fix below.
>
> Julia, it might be worth to have a coccinelle check for that. It's the
> only place which got it wrong, but this goes unnoticed when code is
> e.g. only fully tested on 64bit or as in this case never tested with
> full debugging enabled. The whole kmap_atomic and kmap_local (new in
> next) family and all users like the sg_miter stuff are affected by this.

OK, thanks for the suggestion.  I will look into it.

julia

>
> Thanks,
>
>         tglx
> ---
> Subject: crypto: sun4i-ss - Fix sg_miter_stop() ordering
> From: Thomas Gleixner <tglx@linutronix.de>
> Date: Sat, 05 Dec 2020 20:17:28 +0100
>
> sun4i_ss_opti_poll() and sun4i_ss_cipher_poll() do:
>
>         sg_miter_next(&mi);
>         sg_miter_next(&mo);
> 	...
>         sg_miter_stop(&mi);
>         sg_miter_stop(&mo);
>
> which is the wrong order because sg_miter_next() maps a page with
> kmap_atomic() and sg_miter_stop() unmaps it. kmap_atomic() uses a stack
> internaly which requires that the nested map is unmapped first. As this
> uses the wrong order it triggers the warning in kunmap_local_indexed()
> which checks the to be unmapped address and subsequently crashes.
>
> This went unnoticed for 5 years because the ARM kmap_atomic()
> implementation had the warning conditional on CONFIG_DEBUG_HIGHMEM which
> was obviously never enabled when testing that driver.
>
> Flip the order to cure it.
>
> Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> Fixes: 6298e948215f ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
> Cc: stable@vger.kernel.org
> ---
>  drivers/crypto/allwinner/sun4i-ss/sun4i-ss-cipher.c |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> --- a/drivers/crypto/allwinner/sun4i-ss/sun4i-ss-cipher.c
> +++ b/drivers/crypto/allwinner/sun4i-ss/sun4i-ss-cipher.c
> @@ -109,8 +109,8 @@ static int noinline_for_stack sun4i_ss_o
>  	}
>
>  release_ss:
> -	sg_miter_stop(&mi);
>  	sg_miter_stop(&mo);
> +	sg_miter_stop(&mi);
>  	writel(0, ss->base + SS_CTL);
>  	spin_unlock_irqrestore(&ss->slock, flags);
>  	return err;
> @@ -333,8 +333,8 @@ static int sun4i_ss_cipher_poll(struct s
>  	}
>
>  release_ss:
> -	sg_miter_stop(&mi);
>  	sg_miter_stop(&mo);
> +	sg_miter_stop(&mi);
>  	writel(0, ss->base + SS_CTL);
>  	spin_unlock_irqrestore(&ss->slock, flags);
>
>
>
>


  reply	other threads:[~2020-12-05 20:16 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20201201130102.GA23461@Red>
     [not found] ` <87ft4phcyx.fsf@nanos.tec.linutronix.de>
     [not found]   ` <20201201135252.GA9584@Red>
     [not found]     ` <87y2ihfw6z.fsf@nanos.tec.linutronix.de>
     [not found]       ` <20201201144529.GA6786@Red>
     [not found]         ` <87v9dlfthf.fsf@nanos.tec.linutronix.de>
     [not found]           ` <20201202195501.GA29296@Red>
     [not found]             ` <877dpzexfr.fsf@nanos.tec.linutronix.de>
     [not found]               ` <20201203173846.GA16207@Red>
2020-12-03 23:34                 ` crypto: sun4i-ss: error with kmap Thomas Gleixner
2020-12-04 13:26                   ` Corentin Labbe
2020-12-04 15:08                     ` Thomas Gleixner
2020-12-04 19:27                       ` Corentin Labbe
2020-12-04 20:58                         ` Thomas Gleixner
2020-12-05 18:43                           ` Corentin Labbe
2020-12-05 19:48                             ` Thomas Gleixner
2020-12-05 20:16                               ` Julia Lawall [this message]
2020-12-06 21:40                               ` Corentin Labbe
2020-12-07  0:15                                 ` Thomas Gleixner
2020-12-07 12:18                                   ` Corentin Labbe
2020-12-07 15:53                                     ` Thomas Gleixner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.DEB.2.22.394.2012052115430.2754@hadrien \
    --to=julia.lawall@inria.fr \
    --cc=akpm@linuxfoundation.org \
    --cc=axboe@kernel.dk \
    --cc=clabbe.montjoie@gmail.com \
    --cc=herbert@gondor.apana.org.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mripard@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).