From: David Hildenbrand <david@redhat.com>
To: linux-kernel@vger.kernel.org, Michal Hocko <mhocko@kernel.org>
Cc: linux-mm@kvack.org, virtio-dev@lists.oasis-open.org,
virtualization@lists.linux-foundation.org, kvm@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
"Michael S . Tsirkin" <mst@redhat.com>,
Sebastien Boeuf <sebastien.boeuf@intel.com>,
Samuel Ortiz <samuel.ortiz@intel.com>,
Robert Bradford <robert.bradford@intel.com>,
Luiz Capitulino <lcapitulino@redhat.com>,
Alexander Duyck <alexander.h.duyck@linux.intel.com>,
Alexander Potapenko <glider@google.com>,
Alexander Viro <viro@zeniv.linux.org.uk>,
Anshuman Khandual <anshuman.khandual@arm.com>,
Anthony Yznaga <anthony.yznaga@oracle.com>,
Dan Williams <dan.j.williams@intel.com>,
Dave Young <dyoung@redhat.com>,
Igor Mammedov <imammedo@redhat.com>,
Jason Wang <jasowang@redhat.com>,
Johannes Weiner <hannes@cmpxchg.org>,
Juergen Gross <jgross@suse.com>,
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>,
Len Brown <lenb@kernel.org>,
Mel Gorman <mgorman@techsingularity.net>,
Michal Hocko <mhocko@suse.com>,
Mike Rapoport <rppt@linux.ibm.com>,
Oscar Salvador <osalvador@suse.com>,
Oscar Salvador <osalvador@suse.de>,
Pavel Tatashin <pasha.tatashin@soleen.com>,
Pavel Tatashin <pavel.tatashin@microsoft.com>,
Pingfan Liu <kernelfans@gmail.com>, Qian Cai <cai@lca.pw>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
Stefan Hajnoczi <stefanha@redhat.com>,
Vlastimil Babka <vbabka@suse.cz>,
Wei Yang <richard.weiyang@gmail.com>
Subject: Re: [PATCH RFC v4 00/13] virtio-mem: paravirtualized memory
Date: Wed, 29 Jan 2020 10:41:26 +0100 [thread overview]
Message-ID: <d07c6b4a-46e3-3f81-04db-ea1475fe48c2@redhat.com> (raw)
In-Reply-To: <9acc5d04-c8e9-ef53-85e4-709030997ca6@redhat.com>
On 09.01.20 14:48, David Hildenbrand wrote:
> On 12.12.19 18:11, David Hildenbrand wrote:
>> This series is based on latest linux-next. The patches are located at:
>> https://github.com/davidhildenbrand/linux.git virtio-mem-rfc-v4
>>
>> The basic idea of virtio-mem is to provide a flexible,
>> cross-architecture memory hot(un)plug solution that avoids many limitations
>> imposed by existing technologies, architectures, and interfaces. More
>> details can be found below and in linked material.
>>
>> This RFC is limited to x86-64, however, should theoretically work on any
>> architecture that supports virtio and implements memory hot(un)plug under
>> Linux - like s390x, powerpc64 and arm64. On x86-64, it is currently
>> possible to add/remove memory to the system in >= 4MB granularity.
>> Memory hotplug works very reliably. For memory unplug, there are no
>> guarantees how much memory can actually get unplugged, it depends on the
>> setup (especially: fragmentation of (unmovable) memory). I have plans to
>> improve that in the future.
>>
>> --------------------------------------------------------------------------
>> 1. virtio-mem
>> --------------------------------------------------------------------------
>>
>> The basic idea behind virtio-mem was presented at KVM Forum 2018. The
>> slides can be found at [1]. The previous RFC can be found at [2]. The
>> first RFC can be found at [3]. However, the concept evolved over time. The
>> KVM Forum slides roughly match the current design.
>>
>> Patch #2 ("virtio-mem: Paravirtualized memory hotplug") contains quite some
>> information, especially in "include/uapi/linux/virtio_mem.h":
>>
>> Each virtio-mem device manages a dedicated region in physical address
>> space. Each device can belong to a single NUMA node, multiple devices
>> for a single NUMA node are possible. A virtio-mem device is like a
>> "resizable DIMM" consisting of small memory blocks that can be plugged
>> or unplugged. The device driver is responsible for (un)plugging memory
>> blocks on demand.
>>
>> Virtio-mem devices can only operate on their assigned memory region in
>> order to (un)plug memory. A device cannot (un)plug memory belonging to
>> other devices.
>>
>> The "region_size" corresponds to the maximum amount of memory that can
>> be provided by a device. The "size" corresponds to the amount of memory
>> that is currently plugged. "requested_size" corresponds to a request
>> from the device to the device driver to (un)plug blocks. The
>> device driver should try to (un)plug blocks in order to reach the
>> "requested_size". It is impossible to plug more memory than requested.
>>
>> The "usable_region_size" represents the memory region that can actually
>> be used to (un)plug memory. It is always at least as big as the
>> "requested_size" and will grow dynamically. It will only shrink when
>> explicitly triggered (VIRTIO_MEM_REQ_UNPLUG).
>>
>> Memory in the usable region can usually be read, however, there are no
>> guarantees. It can happen that the device cannot process a request,
>> because it is busy. The device driver has to retry later.
>>
>> Usually, during system resets all memory will get unplugged, so the
>> device driver can start with a clean state. However, in specific
>> scenarios (if the device is busy) it can happen that the device still
>> has memory plugged. The device driver can request to unplug all memory
>> (VIRTIO_MEM_REQ_UNPLUG) - which might take a while to succeed if the
>> device is busy.
>>
>> --------------------------------------------------------------------------
>> 2. Linux Implementation
>> --------------------------------------------------------------------------
>>
>> This RFC reuses quite some existing MM infrastructure, however, has to
>> expose some additional functionality.
>>
>> Memory blocks (e.g., 128MB) are added/removed on demand. Within these
>> memory blocks, subblocks (e.g., 4MB) are plugged/unplugged. The sizes
>> depend on the target architecture, MAX_ORDER + pageblock_order, and
>> the block size of a virtio-mem device.
>>
>> add_memory()/try_remove_memory() is used to add/remove memory blocks.
>> virtio-mem will not online memory blocks itself. This has to be done by
>> user space, or configured into the kernel
>> (CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE). virtio-mem will only unplug memory
>> that was online to the ZONE_NORMAL. Memory is suggested to be onlined to
>> the ZONE_NORMAL for now.
>>
>> The memory hotplug notifier is used to properly synchronize against
>> onlining/offlining of memory blocks and to track the states of memory
>> blocks (including the zone memory blocks are onlined to).
>>
>> The set_online_page() callback is used to keep unplugged subblocks
>> of a memory block fake-offline when onlining the memory block.
>> generic_online_page() is used to fake-online plugged subblocks. This
>> handling is similar to the Hyper-V balloon driver.
>>
>> PG_offline is used to mark unplugged subblocks as offline, so e.g.,
>> dumping tools (makedumpfile) will skip these pages. This is similar to
>> other balloon drivers like virtio-balloon and Hyper-V.
>>
>> Memory offlining code is extended to allow drivers to drop their reference
>> to PG_offline pages when MEM_GOING_OFFLINE, so these pages can be skipped
>> when offlining memory blocks. This allows to offline memory blocks that
>> have partially unplugged (allocated e.g., via alloc_contig_range())
>> subblocks - or are completely unplugged.
>>
>> alloc_contig_range()/free_contig_range() [now exposed] is used to
>> unplug/plug subblocks of memory blocks the are already exposed to Linux.
>>
>> offline_and_remove_memory() [new] is used to offline a fully unplugged
>> memory block and remove it from Linux.
>>
>>
>> A lot of additional information can be found in the separate patches and
>> as comments in the code itself.
>>
>> --------------------------------------------------------------------------
>> 3. Changes RFC v2 -> v3
>> --------------------------------------------------------------------------
>>
>> A lot of things changed, especially also on the QEMU + virtio side. The
>> biggest changes on the Linux driver side are:
>> - Onlining/offlining of subblocks is now emulated on top of memory blocks.
>> set_online_page()+alloc_contig_range()+free_contig_range() is now used
>> for that. Core MM does not have to be modified and will continue to
>> online/offline full memory blocks.
>> - Onlining/offlining of memory blocks is no longer performed by virtio-mem.
>> - Pg_offline is upstream and can be used. It is also used to allow
>> offlining of partially unplugged memory blocks.
>> - Memory block states + subblocks are now tracked more space-efficient.
>> - Proper kexec(), kdump(), driver unload, driver reload, ZONE_MOVABLE, ...
>> handling.
>>
>> --------------------------------------------------------------------------
>> 4. Changes RFC v3 -> RFC v4
>> --------------------------------------------------------------------------
>>
>> Only minor things changed, especially nothing on the QEMU + virtio side.
>> Interresting changes on the Linux driver side are:
>> - "mm: Allow to offline unmovable PageOffline() pages via
>> MEM_GOING_OFFLINE"
>> -- Rework to Michals suggestion (allow to isolate all PageOffline() pages
>> by skipping all PageOffline() pages in has_unmovable_pages(). Fail
>> offlining later if the pages cannot be offlined/migrated).
>> - "virtio-mem: Allow to offline partially unplugged memory blocks"
>> -- Adapt to Michals suggestion on core-mm part.
>> - "virtio-mem: Better retry handling"
>> -- Optimize retry intervals
>> - "virtio-mem: Drop slab objects when unplug continues to fail"
>> -- Call drop_slab()/drop_slab_node() when unplug keeps failing for a longer
>> time.
>> - Multiple cleanups and fixes.
>>
>> --------------------------------------------------------------------------
>> 5. Future work
>> --------------------------------------------------------------------------
>>
>> The separate patches contain a lot of future work items. One of the next
>> steps is to make memory unplug more likely to succeed - currently, there
>> are no guarantees on how much memory can get unplugged again. I have
>> various ideas on how to limit fragmentation of all memory blocks that
>> virtio-mem added.
>>
>> Memory hotplug:
>> - Reduce the amount of memory resources if that turnes out to be an
>> issue. Or try to speed up relevant code paths to deal with many
>> resources.
>> - Allocate the vmemmap from the added memory. Makes hotplug more likely
>> to succeed, the vmemmap is stored on the same NUMA node and that
>> unmovable memory will later not hinder unplug.
>>
>> Memory hotunplug:
>> - Performance improvements:
>> -- Sense (lockless) if it make sense to try alloc_contig_range() at all
>> before directly trying to isolate and taking locks.
>> -- Try to unplug bigger chunks if possible first.
>> -- Identify free areas first, that don't have to be evacuated.
>> - Make unplug more likely to succeed:
>> -- There are various idea to limit fragmentation on memory block
>> granularity. (e.g., ZONE_PREFER_MOVABLE and smart balancing)
>> -- Allocate memmap from added memory. This way, less unmovable data can
>> end up on the memory blocks.
>> - OOM handling, e.g., via an OOM handler.
>> - Defragmentation
>> -- Will require a new virtio-mem CMD to exchange plugged<->unplugged blocks
>>
>> --------------------------------------------------------------------------
>> 6. Example Usage
>> --------------------------------------------------------------------------
>>
>> A very basic QEMU prototype (kept updated) is available at:
>> https://github.com/davidhildenbrand/qemu.git virtio-mem
>>
>> It lacks various features, however, works to test the guest driver side:
>> - No support for resizable memory regions / memory backends yet
>> - No protection of unplugged memory (esp., userfaultfd-wp) yet
>> - No dump/migration/XXX optimizations to skip unplugged memory (and avoid
>> touching it)
>>
>> Start QEMU with two virtio-mem devices (one per NUMA node):
>> $ qemu-system-x86_64 -m 4G,maxmem=20G \
>> -smp sockets=2,cores=2 \
>> -numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \
>> [...]
>> -object memory-backend-ram,id=mem0,size=8G \
>> -device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=128M \
>> -object memory-backend-ram,id=mem1,size=8G \
>> -device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=80M
>>
>> Query the configuration:
>> QEMU 4.1.95 monitor - type 'help' for more information
>> (qemu) info memory-devices
>> Memory device [virtio-mem]: "vm0"
>> memaddr: 0x140000000
>> node: 0
>> requested-size: 134217728
>> size: 134217728
>> max-size: 8589934592
>> block-size: 2097152
>> memdev: /objects/mem0
>> Memory device [virtio-mem]: "vm1"
>> memaddr: 0x340000000
>> node: 1
>> requested-size: 83886080
>> size: 83886080
>> max-size: 8589934592
>> block-size: 2097152
>> memdev: /objects/mem1
>>
>> Add some memory to node 1:
>> QEMU 4.1.95 monitor - type 'help' for more information
>> (qemu) qom-set vm1 requested-size 1G
>>
>> Remove some memory from node 0:
>> QEMU 4.1.95 monitor - type 'help' for more information
>> (qemu) qom-set vm0 requested-size 64M
>>
>> Query the configuration again:
>> (qemu) info memory-devices
>> Memory device [virtio-mem]: "vm0"
>> memaddr: 0x140000000
>> node: 0
>> requested-size: 67108864
>> size: 67108864
>> max-size: 8589934592
>> block-size: 2097152
>> memdev: /objects/mem0
>> Memory device [virtio-mem]: "vm1"
>> memaddr: 0x340000000
>> node: 1
>> requested-size: 1073741824
>> size: 1073741824
>> max-size: 8589934592
>> block-size: 2097152
>> memdev: /objects/mem1
>>
>> --------------------------------------------------------------------------
>> 7. Q/A
>> --------------------------------------------------------------------------
>>
>> Q: Why add/remove parts ("subblocks") of memory blocks/sections?
>> A: Flexibility (section size depends on the architecture) - e.g., some
>> architectures have a section size of 2GB. Also, the memory block size
>> is variable (e.g., on x86-64). I want to avoid any such restrictions.
>> Some use cases want to add/remove memory in smaller granularities to a
>> VM (e.g., the Hyper-V balloon also implements this) - especially smaller
>> VMs like used for kata containers. Also, on memory unplug, it is more
>> reliable to free-up and unplug multiple small chunks instead
>> of one big chunk. E.g., if one page of a DIMM is either unmovable or
>> pinned, the DIMM can't get unplugged. This approach is basically a
>> compromise between DIMM-based memory hot(un)plug and balloon
>> inflation/deflation, which works mostly on page granularity.
>>
>> Q: Why care about memory blocks?
>> A: They are the way to tell user space about new memory. This way,
>> memory can get onlined/offlined by user space. Also, e.g., kdump
>> relies on udev events to reload kexec when memory blocks are
>> onlined/offlined. Memory blocks are the "real" memory hot(un)plug
>> granularity. Everything that's smaller has to be emulated "on top".
>>
>> Q: Won't memory unplug of subblocks fragment memory?
>> A: Yes and no. Unplugging e.g., >=4MB subblocks on x86-64 will not really
>> fragment memory like unplugging random pages like a balloon driver does.
>> Buddy merging will not be limited. However, any allocation that requires
>> bigger consecutive memory chunks (e.g., gigantic pages) might observe
>> the fragmentation. Possible solutions: Allocate gigantic huge pages
>> before unplugging memory, don't unplug memory, combine virtio-mem with
>> DIMM based memory or bigger initial memory. Remember, a virtio-mem
>> device will only unplug on the memory range it manages, not on other
>> DIMMs. Unplug of single memory blocks will result in similar
>> fragmentation in respect to gigantic huge pages. I ahve plans for a
>> virtio-mem defragmentation feature in the future.
>>
>> Q: How reliable is memory unplug?
>> A: There are no guarantees on how much memory can get unplugged
>> again. However, it is more likely to find 4MB chunks to unplug than
>> e.g., 128MB chunks. If memory is terribly fragmented, there is nothing
>> we can do - for now. I consider memory hotplug the first primary use
>> of virtio-mem. Memory unplug might usually work, but we want to improve
>> the performance and the amount of memory we can actually unplug later.
>>
>> Q: Why not unplug from the ZONE_MOVABLE?
>> A: Unplugged memory chunks are unmovable. Unmovable data must not end up
>> on the ZONE_MOVABLE - similar to gigantic pages - they will never be
>> allocated from ZONE_MOVABLE. virtio-mem added memory can be onlined
>> to the ZONE_MOVABLE, but subblocks will not get unplugged from it.
>>
>> Q: How big should the initial (!virtio-mem) memory of a VM be?
>> A: virtio-mem memory will not go to the DMA zones. So to avoid running out
>> of DMA memory, I suggest something like 2-3GB on x86-64. But many
>> VMs can most probably deal with less DMA memory - depends on the use
>> case.
>>
>> [1] https://events.linuxfoundation.org/wp-content/uploads/2017/12/virtio-mem-Paravirtualized-Memory-David-Hildenbrand-Red-Hat-1.pdf
>> [2] https://lkml.kernel.org/r/20190919142228.5483-1-david@redhat.com
>> [3] https://lkml.kernel.org/r/547865a9-d6c2-7140-47e2-5af01e7d761d@redhat.com
>>
>> Cc: Sebastien Boeuf <sebastien.boeuf@intel.com>
>> Cc: Samuel Ortiz <samuel.ortiz@intel.com>
>> Cc: Robert Bradford <robert.bradford@intel.com>
>> Cc: Luiz Capitulino <lcapitulino@redhat.com>
>>
>> David Hildenbrand (13):
>> ACPI: NUMA: export pxm_to_node
>> virtio-mem: Paravirtualized memory hotplug
>> virtio-mem: Paravirtualized memory hotunplug part 1
>> mm: Export alloc_contig_range() / free_contig_range()
>> virtio-mem: Paravirtualized memory hotunplug part 2
>> mm: Allow to offline unmovable PageOffline() pages via
>> MEM_GOING_OFFLINE
>> virtio-mem: Allow to offline partially unplugged memory blocks
>> mm/memory_hotplug: Introduce offline_and_remove_memory()
>> virtio-mem: Offline and remove completely unplugged memory blocks
>> virtio-mem: Better retry handling
>> mm/vmscan: Move count_vm_event(DROP_SLAB) into drop_slab()
>> mm/vmscan: Export drop_slab() and drop_slab_node()
>> virtio-mem: Drop slab objects when unplug continues to fail
>
> Ping,
>
> I'd love to get some feedback on
>
> a) The remaining MM bits from MM folks (especially, patch #6 and #8).
Friendly ping again:
Can I get some feedback on the two important MM changes in this series
"[PATCH RFC v4 06/13] mm: Allow to offline unmovable PageOffline() pages
via MEM_GOING_OFFLINE"
and
"[PATCH RFC v4 08/13] mm/memory_hotplug: Introduce
offline_and_remove_memory()"
--
Thanks,
David / dhildenb
next prev parent reply other threads:[~2020-01-29 9:42 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-12 17:11 [PATCH RFC v4 00/13] virtio-mem: paravirtualized memory David Hildenbrand
2019-12-12 17:11 ` [PATCH RFC v4 01/13] ACPI: NUMA: export pxm_to_node David Hildenbrand
2019-12-12 21:43 ` Rafael J. Wysocki
2019-12-13 9:41 ` David Hildenbrand
2019-12-13 9:47 ` Rafael J. Wysocki
2019-12-12 17:11 ` [PATCH RFC v4 02/13] virtio-mem: Paravirtualized memory hotplug David Hildenbrand
2019-12-12 17:11 ` [PATCH RFC v4 03/13] virtio-mem: Paravirtualized memory hotunplug part 1 David Hildenbrand
2019-12-12 17:11 ` [PATCH RFC v4 04/13] mm: Export alloc_contig_range() / free_contig_range() David Hildenbrand
2019-12-12 17:11 ` [PATCH RFC v4 05/13] virtio-mem: Paravirtualized memory hotunplug part 2 David Hildenbrand
2019-12-12 17:11 ` [PATCH RFC v4 06/13] mm: Allow to offline unmovable PageOffline() pages via MEM_GOING_OFFLINE David Hildenbrand
2020-02-25 18:26 ` Alexander Duyck
2020-02-25 18:49 ` David Hildenbrand
2020-02-25 21:46 ` Alexander Duyck
2020-02-25 22:19 ` David Hildenbrand
2020-02-26 16:27 ` Alexander Duyck
2019-12-12 17:11 ` [PATCH RFC v4 07/13] virtio-mem: Allow to offline partially unplugged memory blocks David Hildenbrand
2019-12-12 17:11 ` [PATCH RFC v4 08/13] mm/memory_hotplug: Introduce offline_and_remove_memory() David Hildenbrand
2020-02-25 14:11 ` Michal Hocko
2020-02-25 14:27 ` David Hildenbrand
2020-03-02 12:48 ` Michal Hocko
2020-03-02 12:53 ` David Hildenbrand
2019-12-12 17:11 ` [PATCH RFC v4 09/13] virtio-mem: Offline and remove completely unplugged memory blocks David Hildenbrand
2019-12-12 17:11 ` [PATCH RFC v4 10/13] virtio-mem: Better retry handling David Hildenbrand
2019-12-12 17:11 ` [PATCH RFC v4 11/13] mm/vmscan: Move count_vm_event(DROP_SLAB) into drop_slab() David Hildenbrand
2020-02-25 14:13 ` Michal Hocko
2019-12-12 17:11 ` [PATCH RFC v4 12/13] mm/vmscan: Export drop_slab() and drop_slab_node() David Hildenbrand
2020-02-25 14:58 ` Michal Hocko
2020-02-25 15:09 ` David Hildenbrand
2020-02-25 17:06 ` Michal Hocko
2020-02-25 17:23 ` David Hildenbrand
2019-12-12 17:11 ` [PATCH RFC v4 13/13] virtio-mem: Drop slab objects when unplug continues to fail David Hildenbrand
2019-12-13 20:15 ` [PATCH RFC v4 00/13] virtio-mem: paravirtualized memory Konrad Rzeszutek Wilk
2019-12-16 11:03 ` David Hildenbrand
2019-12-24 6:58 ` teawater
2019-12-24 9:28 ` David Hildenbrand
2020-01-09 13:48 ` David Hildenbrand
2020-01-29 9:41 ` David Hildenbrand [this message]
2020-02-25 9:58 ` David Hildenbrand
2020-06-05 8:55 ` Alex Shi
2020-06-05 9:08 ` David Hildenbrand
2020-06-05 9:36 ` David Hildenbrand
2020-06-05 10:05 ` David Hildenbrand
2020-06-05 10:46 ` Alex Shi
2020-06-05 12:18 ` David Hildenbrand
2020-06-09 3:05 ` Alex Shi
2020-06-05 10:08 ` Alex Shi
2020-06-05 10:06 ` Alex Shi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d07c6b4a-46e3-3f81-04db-ea1475fe48c2@redhat.com \
--to=david@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=alexander.h.duyck@linux.intel.com \
--cc=anshuman.khandual@arm.com \
--cc=anthony.yznaga@oracle.com \
--cc=cai@lca.pw \
--cc=dan.j.williams@intel.com \
--cc=dyoung@redhat.com \
--cc=glider@google.com \
--cc=hannes@cmpxchg.org \
--cc=imammedo@redhat.com \
--cc=jasowang@redhat.com \
--cc=jgross@suse.com \
--cc=kernelfans@gmail.com \
--cc=konrad.wilk@oracle.com \
--cc=kvm@vger.kernel.org \
--cc=lcapitulino@redhat.com \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@techsingularity.net \
--cc=mhocko@kernel.org \
--cc=mhocko@suse.com \
--cc=mst@redhat.com \
--cc=osalvador@suse.com \
--cc=osalvador@suse.de \
--cc=pasha.tatashin@soleen.com \
--cc=pavel.tatashin@microsoft.com \
--cc=richard.weiyang@gmail.com \
--cc=rjw@rjwysocki.net \
--cc=robert.bradford@intel.com \
--cc=rppt@linux.ibm.com \
--cc=samuel.ortiz@intel.com \
--cc=sebastien.boeuf@intel.com \
--cc=stefanha@redhat.com \
--cc=vbabka@suse.cz \
--cc=viro@zeniv.linux.org.uk \
--cc=virtio-dev@lists.oasis-open.org \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).