linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Dou Liyang <douly.fnst@cn.fujitsu.com>
To: Mike Galbraith <efault@gmx.de>,
	"Kirill A. Shutemov" <kirill@shutemov.name>,
	Ingo Molnar <mingo@kernel.org>,
	Andrew Morton <akpm@linux-foundation.org>
Cc: Baoquan He <bhe@redhat.com>,
	Peter Zijlstra <peterz@infradead.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Dave Young <dyoung@redhat.com>,
	kexec@lists.infradead.org, linux-kernel@vger.kernel.org,
	stable@vger.kernel.org, Andy Lutomirski <luto@amacapital.net>,
	linux-mm@kvack.org, Vivek Goyal <vgoyal@redhat.com>,
	Cyrill Gorcunov <gorcunov@openvz.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Borislav Petkov <bp@suse.de>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Subject: Re: [PATCH 4.14 023/159] mm/sparsemem: Allocate mem_section at runtime for CONFIG_SPARSEMEM_EXTREME=y
Date: Wed, 7 Feb 2018 17:25:05 +0800	[thread overview]
Message-ID: <d71ba136-71ba-333a-f99b-b8283e2dc545@cn.fujitsu.com> (raw)
In-Reply-To: <1515469448.6766.12.camel@gmx.de>

Hi All,

I met the makedumpfile failed in the upstream kernel which contained
this patch. Did I missed something else?

In fedora27 host:

[douly@localhost code]$ ./makedumpfile -d 31 --message-level 31 -x
vmlinux_4.15+ vmcore_4.15+_from_cp_command vmcore_4.15+

sadump: does not have partition header
sadump: read dump device as unknown format
sadump: unknown format
LOAD (0)
   phys_start : 1000000
   phys_end   : 2a86000
   virt_start : ffffffff81000000
   virt_end   : ffffffff82a86000
LOAD (1)
   phys_start : 1000
   phys_end   : 9fc00
   virt_start : ffff880000001000
   virt_end   : ffff88000009fc00
LOAD (2)
   phys_start : 100000
   phys_end   : 13000000
   virt_start : ffff880000100000
   virt_end   : ffff880013000000
LOAD (3)
   phys_start : 33000000
   phys_end   : 7ffd7000
   virt_start : ffff880033000000
   virt_end   : ffff88007ffd7000
Linux kdump
page_size    : 4096

max_mapnr    : 7ffd7

Buffer size for the cyclic mode: 131061
The kernel version is not supported.
The makedumpfile operation may be incomplete.

num of NODEs : 1


Memory type  : SPARSEMEM_EX

mem_map (0)
   mem_map    : ffff88007ff26000
   pfn_start  : 0
   pfn_end    : 8000
mem_map (1)
   mem_map    : 0
   pfn_start  : 8000
   pfn_end    : 10000
mem_map (2)
   mem_map    : 0
   pfn_start  : 10000
   pfn_end    : 18000
mem_map (3)
   mem_map    : 0
   pfn_start  : 18000
   pfn_end    : 20000
mem_map (4)
   mem_map    : 0
   pfn_start  : 20000
   pfn_end    : 28000
mem_map (5)
   mem_map    : 0
   pfn_start  : 28000
   pfn_end    : 30000
mem_map (6)
   mem_map    : 0
   pfn_start  : 30000
   pfn_end    : 38000
mem_map (7)
   mem_map    : 0
   pfn_start  : 38000
   pfn_end    : 40000
mem_map (8)
   mem_map    : 0
   pfn_start  : 40000
   pfn_end    : 48000
mem_map (9)
   mem_map    : 0
   pfn_start  : 48000
   pfn_end    : 50000
mem_map (10)
   mem_map    : 0
   pfn_start  : 50000
   pfn_end    : 58000
mem_map (11)
   mem_map    : 0
   pfn_start  : 58000
   pfn_end    : 60000
mem_map (12)
   mem_map    : 0
   pfn_start  : 60000
   pfn_end    : 68000
mem_map (13)
   mem_map    : 0
   pfn_start  : 68000
   pfn_end    : 70000
mem_map (14)
   mem_map    : 0
   pfn_start  : 70000
   pfn_end    : 78000
mem_map (15)
   mem_map    : 0
   pfn_start  : 78000
   pfn_end    : 7ffd7
mmap() is available on the kernel.
Checking for memory holes                         : [100.0 %] | 
         STEP [Checking for memory holes  ] : 0.000060 seconds
__vtop4_x86_64: Can't get a valid pte.
readmem: Can't convert a virtual address(ffff88007ffd7000) to physical 
address.
readmem: type_addr: 0, addr:ffff88007ffd7000, size:32768
__exclude_unnecessary_pages: Can't read the buffer of struct page.
create_2nd_bitmap: Can't exclude unnecessary pages.
Checking for memory holes                         : [100.0 %] \ 
         STEP [Checking for memory holes  ] : 0.000010 seconds
Checking for memory holes                         : [100.0 %] - 
         STEP [Checking for memory holes  ] : 0.000004 seconds
__vtop4_x86_64: Can't get a valid pte.
readmem: Can't convert a virtual address(ffff88007ffd7000) to physical 
address.
readmem: type_addr: 0, addr:ffff88007ffd7000, size:32768
__exclude_unnecessary_pages: Can't read the buffer of struct page.
create_2nd_bitmap: Can't exclude unnecessary pages.

Thanks,
	dou
At 01/09/2018 11:44 AM, Mike Galbraith wrote:
> On Tue, 2018-01-09 at 03:13 +0300, Kirill A. Shutemov wrote:
>>
>> Mike, could you test this? (On top of the rest of the fixes.)
> 
> homer:..crash/2018-01-09-04:25 # ll
> total 1863604
> -rw------- 1 root root      66255 Jan  9 04:25 dmesg.txt
> -rw-r--r-- 1 root root        182 Jan  9 04:25 README.txt
> -rw-r--r-- 1 root root    2818240 Jan  9 04:25 System.map-4.15.0.gb2cd1df-master
> -rw------- 1 root root 1832914928 Jan  9 04:25 vmcore
> -rw-r--r-- 1 root root   72514993 Jan  9 04:25 vmlinux-4.15.0.gb2cd1df-master.gz
> 
> Yup, all better.
> 
>> Sorry for the mess.
> 
> (why, developers not installing shiny new bugs is a whole lot worse:)
> 
>>  From 100fd567754f1457be94732046aefca204c842d2 Mon Sep 17 00:00:00 2001
>> From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
>> Date: Tue, 9 Jan 2018 02:55:47 +0300
>> Subject: [PATCH] kdump: Write a correct address of mem_section into vmcoreinfo
>>
>> Depending on configuration mem_section can now be an array or a pointer
>> to an array allocated dynamically. In most cases, we can continue to refer
>> to it as 'mem_section' regardless of what it is.
>>
>> But there's one exception: '&mem_section' means "address of the array" if
>> mem_section is an array, but if mem_section is a pointer, it would mean
>> "address of the pointer".
>>
>> We've stepped onto this in kdump code. VMCOREINFO_SYMBOL(mem_section)
>> writes down address of pointer into vmcoreinfo, not array as we wanted.
>>
>> Let's introduce VMCOREINFO_ARRAY() that would handle the situation
>> correctly for both cases.
>>
>> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
>> Fixes: 83e3c48729d9 ("mm/sparsemem: Allocate mem_section at runtime for CONFIG_SPARSEMEM_EXTREME=y")
>> ---
>>   include/linux/crash_core.h | 2 ++
>>   kernel/crash_core.c        | 2 +-
>>   2 files changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/include/linux/crash_core.h b/include/linux/crash_core.h
>> index 06097ef30449..83ae04950269 100644
>> --- a/include/linux/crash_core.h
>> +++ b/include/linux/crash_core.h
>> @@ -42,6 +42,8 @@ phys_addr_t paddr_vmcoreinfo_note(void);
>>   	vmcoreinfo_append_str("PAGESIZE=%ld\n", value)
>>   #define VMCOREINFO_SYMBOL(name) \
>>   	vmcoreinfo_append_str("SYMBOL(%s)=%lx\n", #name, (unsigned long)&name)
>> +#define VMCOREINFO_ARRAY(name) \
>> +	vmcoreinfo_append_str("SYMBOL(%s)=%lx\n", #name, (unsigned long)name)
>>   #define VMCOREINFO_SIZE(name) \
>>   	vmcoreinfo_append_str("SIZE(%s)=%lu\n", #name, \
>>   			      (unsigned long)sizeof(name))
>> diff --git a/kernel/crash_core.c b/kernel/crash_core.c
>> index b3663896278e..d4122a837477 100644
>> --- a/kernel/crash_core.c
>> +++ b/kernel/crash_core.c
>> @@ -410,7 +410,7 @@ static int __init crash_save_vmcoreinfo_init(void)
>>   	VMCOREINFO_SYMBOL(contig_page_data);
>>   #endif
>>   #ifdef CONFIG_SPARSEMEM
>> -	VMCOREINFO_SYMBOL(mem_section);
>> +	VMCOREINFO_ARRAY(mem_section);
>>   	VMCOREINFO_LENGTH(mem_section, NR_SECTION_ROOTS);
>>   	VMCOREINFO_STRUCT_SIZE(mem_section);
>>   	VMCOREINFO_OFFSET(mem_section, section_mem_map);
> 
> _______________________________________________
> kexec mailing list
> kexec@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/kexec
> 
> 
> 


--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  reply	other threads:[~2018-02-07  9:26 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20171222084623.668990192@linuxfoundation.org>
2017-12-22  8:45 ` [PATCH 4.14 023/159] mm/sparsemem: Allocate mem_section at runtime for CONFIG_SPARSEMEM_EXTREME=y Greg Kroah-Hartman
2017-12-22 14:18   ` Dan Rue
2017-12-22 14:52     ` Naresh Kamboju
2017-12-22 15:12       ` Greg Kroah-Hartman
2017-12-22 15:03     ` Greg Kroah-Hartman
2018-01-07  5:14   ` Mike Galbraith
2018-01-07  9:11     ` Greg Kroah-Hartman
2018-01-07  9:21       ` Mike Galbraith
2018-01-07 10:18       ` Michal Hocko
2018-01-07 10:42         ` Greg Kroah-Hartman
2018-01-07 12:44         ` Mike Galbraith
2018-01-07 13:23           ` Michal Hocko
2018-01-08  7:53             ` Greg Kroah-Hartman
2018-01-08  8:15               ` Mike Galbraith
2018-01-08  8:33                 ` Greg Kroah-Hartman
2018-01-08  9:45                   ` Mike Galbraith
2018-01-08  8:47               ` Michal Hocko
2018-01-08  9:10                 ` Greg Kroah-Hartman
2018-01-08  9:27                   ` Greg Kroah-Hartman
2018-01-08 16:04     ` Ingo Molnar
2018-01-08 17:46       ` Kirill A. Shutemov
2018-01-09  0:13         ` Kirill A. Shutemov
2018-01-09  1:09           ` Dave Young
2018-01-09  5:41             ` Baoquan He
2018-01-09  7:24               ` Dave Young
2018-01-09  9:05                 ` Kirill A. Shutemov
2018-01-10  3:08                   ` Dave Young
2018-01-10 11:16                     ` Kirill A. Shutemov
2018-01-11  1:06                       ` Baoquan He
2018-01-12  0:55                       ` Dave Young
2018-01-15  5:57                         ` Omar Sandoval
2018-01-16  8:36                           ` Atsushi Kumagai
2018-01-09  3:44           ` Mike Galbraith
2018-02-07  9:25             ` Dou Liyang [this message]
2018-02-07 10:41               ` Kirill A. Shutemov
2018-02-07 10:45                 ` Mike Galbraith
2018-02-07 12:00                   ` Dou Liyang
2018-02-07 12:08                     ` Baoquan He
2018-02-07 12:17                       ` Dou Liyang
2018-02-07 12:27                         ` Baoquan He
2018-02-07 12:34                           ` Dou Liyang
2018-02-07 12:45                             ` Baoquan He
2018-02-08  1:14                               ` Dou Liyang
2018-02-08  1:23                                 ` Baoquan He
2018-02-08  1:44                                   ` Dou Liyang
2018-02-07 11:28               ` Baoquan He
2018-01-17  5:24           ` Baoquan He
2018-01-25 15:50             ` Kirill A. Shutemov
2018-01-26  2:48               ` Baoquan He
2017-12-22  8:45 ` [PATCH 4.14 024/159] x86/kasan: Use the same shadow offset for 4- and 5-level paging Greg Kroah-Hartman
2017-12-22  8:45 ` [PATCH 4.14 025/159] x86/xen: Provide pre-built page tables only for CONFIG_XEN_PV=y and CONFIG_XEN_PVH=y Greg Kroah-Hartman
2017-12-22  8:45 ` [PATCH 4.14 026/159] x86/xen: Drop 5-level paging support code from the XEN_PV code Greg Kroah-Hartman
2017-12-22  8:45 ` [PATCH 4.14 033/159] x86/boot: Relocate definition of the initial state of CR0 Greg Kroah-Hartman
2017-12-22  8:46 ` [PATCH 4.14 097/159] x86/paravirt: Dont patch flush_tlb_single Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d71ba136-71ba-333a-f99b-b8283e2dc545@cn.fujitsu.com \
    --to=douly.fnst@cn.fujitsu.com \
    --cc=akpm@linux-foundation.org \
    --cc=bhe@redhat.com \
    --cc=bp@suse.de \
    --cc=dyoung@redhat.com \
    --cc=efault@gmx.de \
    --cc=gorcunov@openvz.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=kexec@lists.infradead.org \
    --cc=kirill.shutemov@linux.intel.com \
    --cc=kirill@shutemov.name \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=luto@amacapital.net \
    --cc=mingo@kernel.org \
    --cc=peterz@infradead.org \
    --cc=stable@vger.kernel.org \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    --cc=vgoyal@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).