From: Xu Yu <xuyu@linux.alibaba.com>
To: linux-fsdevel@vger.kernel.org, linux-mm@kvack.org
Cc: hch@infradead.org, djwong@kernel.org, riteshh@linux.ibm.com,
tytso@mit.edu, gavin.dg@linux.alibaba.com
Subject: [PATCH] mm/swap: consider max pages in iomap_swapfile_add_extent
Date: Wed, 18 Aug 2021 19:36:51 +0800 [thread overview]
Message-ID: <db99c25a8e2a662046e498fd13e5f0c35364164a.1629286473.git.xuyu@linux.alibaba.com> (raw)
When the max pages (last_page in the swap header + 1) is smaller than
the total pages (inode size) of the swapfile, iomap_swapfile_activate
overwrites sis->max with total pages.
However, frontswap_map is allocated using max pages, but cleared using
sis->max in __frontswap_invalidate_area(). The consequence is that the
neighbors of frontswap_map bitmap may be overwritten, and then slab is
polluted.
This fixes the issue by considering the limitation of max pages of swap
info in iomap_swapfile_add_extent().
To reproduce the case, compile kernel with slub RED ZONE, then run test:
$ sudo stress-ng -a 1 -x softlockup,resources -t 72h --metrics --times \
--verify -v -Y /root/tmpdir/stress-ng/stress-statistic-12.yaml \
--log-file /root/tmpdir/stress-ng/stress-logfile-12.txt \
--temp-path /root/tmpdir/stress-ng/
We'll get the error log as below:
[ 1151.015141] =============================================================================
[ 1151.016489] BUG kmalloc-16 (Not tainted): Right Redzone overwritten
[ 1151.017486] -----------------------------------------------------------------------------
[ 1151.017486]
[ 1151.018997] Disabling lock debugging due to kernel taint
[ 1151.019873] INFO: 0x0000000084e43932-0x0000000098d17cae @offset=7392. First byte 0x0 instead of 0xcc
[ 1151.021303] INFO: Allocated in __do_sys_swapon+0xcf6/0x1170 age=43417 cpu=9 pid=3816
[ 1151.022538] __slab_alloc+0xe/0x20
[ 1151.023069] __kmalloc_node+0xfd/0x4b0
[ 1151.023704] __do_sys_swapon+0xcf6/0x1170
[ 1151.024346] do_syscall_64+0x33/0x40
[ 1151.024925] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1151.025749] INFO: Freed in put_cred_rcu+0xa1/0xc0 age=43424 cpu=3 pid=2041
[ 1151.026889] kfree+0x276/0x2b0
[ 1151.027405] put_cred_rcu+0xa1/0xc0
[ 1151.027949] rcu_do_batch+0x17d/0x410
[ 1151.028566] rcu_core+0x14e/0x2b0
[ 1151.029084] __do_softirq+0x101/0x29e
[ 1151.029645] asm_call_irq_on_stack+0x12/0x20
[ 1151.030381] do_softirq_own_stack+0x37/0x40
[ 1151.031037] do_softirq.part.15+0x2b/0x30
[ 1151.031710] __local_bh_enable_ip+0x4b/0x50
[ 1151.032412] copy_fpstate_to_sigframe+0x111/0x360
[ 1151.033197] __setup_rt_frame+0xce/0x480
[ 1151.033809] arch_do_signal+0x1a3/0x250
[ 1151.034463] exit_to_user_mode_prepare+0xcf/0x110
[ 1151.035242] syscall_exit_to_user_mode+0x27/0x190
[ 1151.035970] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1151.036795] INFO: Slab 0x000000003b9de4dc objects=44 used=9 fp=0x00000000539e349e flags=0xfffffc0010201
[ 1151.038323] INFO: Object 0x000000004855ba01 @offset=7376 fp=0x0000000000000000
[ 1151.038323]
[ 1151.039683] Redzone 000000008d0afd3d: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
[ 1151.041180] Object 000000004855ba01: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 1151.042714] Redzone 0000000084e43932: 00 00 00 c0 cc cc cc cc ........
[ 1151.044120] Padding 000000000864c042: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
[ 1151.045615] CPU: 5 PID: 3816 Comm: stress-ng Tainted: G B 5.10.50+ #7
[ 1151.046846] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 1151.048633] Call Trace:
[ 1151.049072] dump_stack+0x57/0x6a
[ 1151.049585] check_bytes_and_report+0xed/0x110
[ 1151.050320] check_object+0x1eb/0x290
[ 1151.050924] ? __x64_sys_swapoff+0x39a/0x540
[ 1151.051646] free_debug_processing+0x151/0x350
[ 1151.052333] __slab_free+0x21a/0x3a0
[ 1151.052938] ? _cond_resched+0x2d/0x40
[ 1151.053529] ? __vunmap+0x1de/0x220
[ 1151.054139] ? __x64_sys_swapoff+0x39a/0x540
[ 1151.054796] ? kfree+0x276/0x2b0
[ 1151.055307] kfree+0x276/0x2b0
[ 1151.055832] __x64_sys_swapoff+0x39a/0x540
[ 1151.056466] do_syscall_64+0x33/0x40
[ 1151.057084] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1151.057866] RIP: 0033:0x150340b0ffb7
[ 1151.058481] Code: Unable to access opcode bytes at RIP 0x150340b0ff8d.
[ 1151.059537] RSP: 002b:00007fff7f4ee238 EFLAGS: 00000246 ORIG_RAX: 00000000000000a8
[ 1151.060768] RAX: ffffffffffffffda RBX: 00007fff7f4ee66c RCX: 0000150340b0ffb7
[ 1151.061904] RDX: 000000000000000a RSI: 0000000000018094 RDI: 00007fff7f4ee860
[ 1151.063033] RBP: 00007fff7f4ef980 R08: 0000000000000000 R09: 0000150340a672bd
[ 1151.064135] R10: 00007fff7f4edca0 R11: 0000000000000246 R12: 0000000000018094
[ 1151.065253] R13: 0000000000000005 R14: 000000000160d930 R15: 00007fff7f4ee66c
[ 1151.066413] FIX kmalloc-16: Restoring 0x0000000084e43932-0x0000000098d17cae=0xcc
[ 1151.066413]
[ 1151.067890] FIX kmalloc-16: Object at 0x000000004855ba01 not freed
Fixes: 0e6895ba00b7 ("ext4: implement swap_activate aops using iomap")
Signed-off-by: Gang Deng <gavin.dg@linux.alibaba.com>
Signed-off-by: Xu Yu <xuyu@linux.alibaba.com>
---
fs/iomap/swapfile.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/fs/iomap/swapfile.c b/fs/iomap/swapfile.c
index 6250ca6a1f85..4ecf4e1f68ef 100644
--- a/fs/iomap/swapfile.c
+++ b/fs/iomap/swapfile.c
@@ -31,11 +31,16 @@ static int iomap_swapfile_add_extent(struct iomap_swapfile_info *isi)
{
struct iomap *iomap = &isi->iomap;
unsigned long nr_pages;
+ unsigned long max_pages;
uint64_t first_ppage;
uint64_t first_ppage_reported;
uint64_t next_ppage;
int error;
+ if (unlikely(isi->nr_pages >= isi->sis->max))
+ return 0;
+ max_pages = isi->sis->max - isi->nr_pages;
+
/*
* Round the start up and the end down so that the physical
* extent aligns to a page boundary.
@@ -48,6 +53,7 @@ static int iomap_swapfile_add_extent(struct iomap_swapfile_info *isi)
if (first_ppage >= next_ppage)
return 0;
nr_pages = next_ppage - first_ppage;
+ nr_pages = min(nr_pages, max_pages);
/*
* Calculate how much swap space we're adding; the first page contains
--
2.20.1.2432.ga663e714
next reply other threads:[~2021-08-18 11:36 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-18 11:36 Xu Yu [this message]
2021-08-18 17:01 ` [PATCH] mm/swap: consider max pages in iomap_swapfile_add_extent Darrick J. Wong
2021-08-19 0:59 ` Yu Xu
2021-08-19 1:45 ` Darrick J. Wong
2021-08-19 6:31 ` Yu Xu
2021-08-19 1:43 ` [PATCH] generic: add swapfile maxpages regression test Darrick J. Wong
2021-08-19 5:14 ` Zorro Lang
2021-08-19 8:22 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=db99c25a8e2a662046e498fd13e5f0c35364164a.1629286473.git.xuyu@linux.alibaba.com \
--to=xuyu@linux.alibaba.com \
--cc=djwong@kernel.org \
--cc=gavin.dg@linux.alibaba.com \
--cc=hch@infradead.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=riteshh@linux.ibm.com \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).